summaryrefslogtreecommitdiffstats
path: root/xlators/protocol/server/src
Commit message (Collapse)AuthorAgeFilesLines
* rpcsvc: Add latency tracking for rpc programsPranith Kumar K2020-09-071-0/+2
| | | | | | | | | | Added latency tracking of rpc-handling code. With this change we should be able to monitor the amount of time rpc-handling code is consuming for each of the rpc call. fixes: #1466 Change-Id: I04fc7f3b12bfa5053c0fc36885f271cb78f581cd Signed-off-by: Pranith Kumar K <pkarampu@redhat.com>
* xlators/protocol/server: lto-type-mismatchKaleb S. KEITHLEY2020-07-091-1/+1
| | | | | | | | | | | | | | | | | | [ 202s] server-common.h:192:1: warning: type of 'server4_post_link' does not match original declaration [-Wlto-type-mismatch] [ 202s] 192 | server4_post_link(server_state_t *state, gfx_common_3iatt_rsp *rsp, inode_t *inode, struct iatt *stbuf, struct iatt *pre, struct iatt *post); [ 202s] | ^ [ 202s] server-common.c:847:1: note: type mismatch in parameter 7 [ 202s] 847 | server4_post_link(server_state_t *state, gfx_common_3iatt_rsp *rsp,inode_t *inode, struct iatt *stbuf, struct iatt *pre, struct iatt *post, dict_t *xdata) [ 202s] | ^ [ 202s] server-common.c:847:1: note: 'server4_post_link' was previously declared here goes back to glusterfs-6 at least. Only a warning, more of a truth-and-beauty thing. Change-Id: Ib4a74b2d00aec519e9d80a4bdeca20eb6273777f Updates: #1002 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com>
* build: Pass $(LIB_DL) using prog_LDADD or lib_LIBADDAnoop C S2020-07-021-2/+2
| | | | | | | | | | | | | | | | | | "Program and Library Variables" section from Automake manual suggests the following: . . . _LDADD and _LIBADD are inappropriate for passing program-specific linker flags (except for -l, -L, -dlopen and -dlpreopen). Use the _LDFLAGS variable for this purpose. . . . Therefore it is reasonable to move $(LIB_DL) additon from _LDFLAGS to _LDADD and _LIBADD variables for program and library respectively. Change-Id: Id8b4734c207ab28a08bcce683d316cdc7acb0bcd Updates: #1000 Signed-off-by: Anoop C S <anoopcs@redhat.com>
* protocol/server: Fix coverity issue RESOURCE_LEAKSheetal Pamecha2020-04-101-0/+1
| | | | | | | | | Handle case of arg not freed CID: 1422174 Updates: #1060 Change-Id: Ibd03908a3ea8369035c2b7f6e024b3e5be48f436 Signed-off-by: Sheetal Pamecha <spamecha@redhat.com>
* core[brick_mux]: brick crashed when creating and deleting volumes over timeMohit Agrawal2020-03-271-3/+9
| | | | | | | | | | | | | | | | | Problem: In brick_mux environment, while volumes are created/stopped in a loop after running a long time the main brick is crashed.The brick is crashed because the main brick process was not cleaned up memory for all objects at the time of detaching a volume. Below are the objects that are missed at the time of detaching a volume 1) xlator object for a brick graph 2) local_pool for posix_lock xlator 3) rpc object cleanup at quota xlator 4) inode leak at brick xlator Solution: To avoid the crash resolve all leak at the time of detaching a brick Change-Id: Ibb6e46c5fba22b9441a88cbaf6b3278823235913 updates: #977 Signed-off-by: Mohit Agrawal <moagrawa@redhat.com>
* protocol/server-helpers: structure loggingyatip2020-03-032-58/+66
| | | | | | | | | convert gf_msg() to gf_smsg() Updates: #657 Change-Id: Ic7b38b646fa0932f7c1562467866137c4567e1f1 Signed-off-by: yatip <ypadia@redhat.com>
* protocol/server-rpc-fops_v2: structure loggingyatip2020-03-032-411/+363
| | | | | | | | | convert gf_msg() to gf_smsg() Updates: #657 Change-Id: I01146bcd06bca44faeca29da48fab1ee3fc51e00 Signed-off-by: yatip <ypadia@redhat.com>
* protocol/server: structure loggingyatip2020-03-032-147/+157
| | | | | | | | Convert all gf_msg() to gf_smsg() Updates: #657 Change-Id: Ic54b03f05e2766c87f50df0b3a66803b5519fad9 Signed-off-by: yatip <ypadia@redhat.com>
* server.c: fix Coverity issue 1405844 (memory - illegal access)Yaniv Kaul2020-01-231-2/+2
| | | | | | | | | | We can use memcpy() instead of strncpy() as both are strings that are 37 bytes (GF_UUID_BUF_SIZE) long. fixes: CID#1405844 Change-Id: Ic74e8817cd790c13e29f3e6be8f18f2bfff77115 updates: bz#1193929 Signed-off-by: Yaniv Kaul <ykaul@redhat.com>
* server: Mount fails after reboot 1/3 gluster nodesMohit Agrawal2020-01-221-14/+27
| | | | | | | | | | | | | | | | | Problem: At the time of coming up one server node(1x3) after reboot client is unmounted.The client is unmounted because a client is getting AUTH_FAILED event and client call fini for the graph.The client is getting AUTH_FAILED because brick is not attached with a graph at that moment Solution: To avoid the unmounting the client graph throw ENOENT error from server in case if brick is not attached with server at the time of authenticate clients. Credits: Xavi Hernandez <xhernandez@redhat.com> Change-Id: Ie6fbd73cbcf23a35d8db8841b3b6036e87682f5e Fixes: bz#1793852 Signed-off-by: Mohit Agrawal <moagrawa@redhat.com>
* dictionary: remove the 'extra_free' parameterYaniv Kaul2020-01-211-17/+4
| | | | | | | | | | | | | | | This parameter may have been used in the past, but is no longer needed. Removing it and the few locations it was actually referenced. This allows to remove an extra memdup as well, that was not needed in the 1st place in server_setvolume() and unserialize_rsp_direntp() functions. A followup separate patch will remove extra_stdfree parmeter from the dictionary structure. Change-Id: Ica0ff0a330672373aaa60e808b7e76ec489a0fe3 updates: bz#1193929 Signed-off-by: Yaniv Kaul <ykaul@redhat.com>
* debug/io-stats: add an option to set volume-idAmar Tumballi2019-11-291-14/+17
| | | | | | | | | | | 'volume-id' is good to have for a graph for uniquely identifying it. Add it to graph->volume_id while generating volfile itself. This can be further used in many other places. Updates: #763 Change-Id: I80516d62d28a284e8ff4707841570ced97a37e73 Signed-off-by: Amar Tumballi <amar@kadalu.io>
* rpc: align structsYaniv Kaul2019-10-173-193/+199
| | | | | | | | | | | | | squash tens of warnings on padding of structs in afr structures. The warnings were found by manually added '-Wpadded' to the GCC command line. Also made relevant structs and definitions static, where it was applicable. Change-Id: Ib71a7e9c6179378f072d796d11172d086c343e53 updates: bz#1193929 Signed-off-by: Yaniv Kaul <ykaul@redhat.com>
* Multiple files: make root gfid a static variableYaniv Kaul2019-10-141-24/+6
| | | | | | | | | | | | | In many places we use it, compare to it, etc. It could be a static variable, as it really doesn't change. I think it's better than initializing to 0 and then doing gfid[15] = 1 or other tricks. I think there are additional oppportunuties to make more variables static. This is an attempt at an easy one. Change-Id: I7f23a30a94056d8f043645371ab841cbd0f90d19 updates: bz#1193929 Signed-off-by: Yaniv Kaul <ykaul@redhat.com>
* protocol/handshake: pass volume-id for extra checkAmar Tumballi2019-09-303-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With added check of volume-id during handshake, we can be sure to not connect with a brick if this gets re-used in another volume. This prevents any accidental issues which can happen with a stale client process lurking along. Also added test case for testing same volume name which would fetch a different volfile (ie, different bricks, different type), and a different volume name, but same brick. For reference: Currently a client<->server handshake happens in glusterfs through protocol/client translator (setvolume) to protocol/server using a dictionary which containes many keys. Rejection happens in server side if some of the required keys are missing in handshake dictionary. Till now, there was no single unique identifier to validate for a client to tell server if it is actually talking to a corresponding server. All we look in protocol/client is a key called 'remote-subvolume', which should match with a subvolume name in server volume file, and for any volume with same brick name (can be present in same cluster due to recreate), it would be same. This could cause major issue, when a client was connected to a given brick, in one volume would be connected to another volume's brick if its re-created/re-used. To prevent this behavior, we are now passing along 'volume-id' in handshake, which would be preserved for the life of client process, which can prevent this accidental connections. NOTE: This behavior wouldn't be applicable for user-snapshot enabled volumes, as snapshotted volume's would have different volume-id. Fixes: bz#1620580 Change-Id: Ie98286e94ce95ae09c2135fd6ec7d7c2ca1e8095 Signed-off-by: Amar Tumballi <amarts@redhat.com>
* posix: In brick_mux brick is crashed while start/stop volume in loopMohit Agrawal2019-08-201-1/+5
| | | | | | | | | | | | | | | Problem: In brick_mux environment sometime brick is crashed while volume stop/start in a loop.Brick is crashed in janitor task at the time of accessing priv.If posix priv is cleaned up before call janitor task then janitor task is crashed. Solution: To avoid the crash in brick_mux environment introduce a new flag janitor_task_stop in posix_private and before send CHILD_DOWN event wait for update the flag by janitor_task_done Change-Id: Id9fa5d183a463b2b682774ab5cb9868357d139a4 fixes: bz#1730409 Signed-off-by: Mohit Agrawal <moagrawal@redhat.com>
* libglusterfs: remove dependency of rpcAmar Tumballi2019-08-161-1/+0
| | | | | | | | | | | | | | | | | | Goal: 'libglusterfs' files shouldn't have any dependency outside of the tree, specially the header files, shouldn't have '#include' from outside the tree. Fixes: * Had to introduce libglusterd so, methods and structures required for only mgmt/glusterd, and cli/ are separated from 'libglusterfs/' * Remove rpc/xdr/gen from build, which was used mainly so dependency for libglusterfs could be properly satisfied. * Move rpcsvc_auth_data to client_t.h, so all dependencies could be handled. Updates: bz#1636297 Change-Id: I0e80243a5a3f4615e6fac6e1b947ad08a9363fce Signed-off-by: Amar Tumballi <amarts@redhat.com>
* event: rename event_XXX with gf_ prefixedXiubo Li2019-07-291-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I hit one crash issue when using the libgfapi. In the libgfapi it will call glfs_poller() --> event_dispatch() in file api/src/glfs.c:721, and the event_dispatch() is defined by libgluster locally, the problem is the name of event_dispatch() is the extremly the same with the one from libevent package form the OS. For example, if a executable program Foo, which will also use and link the libevent and the libgfapi at the same time, I can hit the crash, like: kernel: glfs_glfspoll[68486]: segfault at 1c0 ip 00007fef006fd2b8 sp 00007feeeaffce30 error 4 in libevent-2.0.so.5.1.9[7fef006ed000+46000] The link for Foo is: lib_foo_LADD = -levent $(GFAPI_LIBS) It will crash. This is because the glfs_poller() is calling the event_dispatch() from the libevent, not the libglsuter. The gfapi link info : GFAPI_LIBS = -lacl -lgfapi -lglusterfs -lgfrpc -lgfxdr -luuid If I link Foo like: lib_foo_LADD = $(GFAPI_LIBS) -levent It will works well without any problem. And if Foo call one private lib, such as handler_glfs.so, and the handler_glfs.so will link the GFAPI_LIBS directly, while the Foo won't and it will dlopen(handler_glfs.so), then the crash will be hit everytime. The link info will be: foo_LADD = -levent libhandler_glfs_LIBADD = $(GFAPI_LIBS) I can avoid the crash temporarily by linking the GFAPI_LIBS in Foo too like: foo_LADD = $(GFAPI_LIBS) -levent libhandler_glfs_LIBADD = $(GFAPI_LIBS) But this is ugly since the Foo won't use any APIs from the GFAPI_LIBS. And in some cases when the --as-needed link option is added(on many dists it is added as default), then the crash is back again, the above workaround won't work. Fixes: #699 Change-Id: I38f0200b941bd1cff4bf3066fca2fc1f9a5263aa Signed-off-by: Xiubo Li <xiubli@redhat.com>
* (multiple files) use dict_allocate_and_serialize() where applicable.Yaniv Kaul2019-07-222-38/+13
| | | | | | | | This function does length, allocation and serialization for you. Change-Id: I142a259952a2fe83dd719442afaefe4a43a8e55e updates: bz#1193929 Signed-off-by: Yaniv Kaul <ykaul@redhat.com>
* stack: Make sure to have unique call-stacks in all casesPranith Kumar K2019-05-301-3/+0
| | | | | | | | | | | | | | | At the moment new stack doesn't populate frame->root->unique in all cases. This makes it difficult to debug hung frames by examining successive state dumps. Fuse and server xlators populate it whenever they can, but other xlators won't be able to assign 'unique' when they need to create a new frame/stack because they don't know what 'unique' fuse/server xlators already used. What we need is for unique to be correct. If a stack with same unique is present in successive statedumps, that means the same operation is still in progress. This makes 'finding hung frames' part of debugging hung frames easier. fixes bz#1714098 Change-Id: I3e9a8f6b4111e260106c48a2ac3a41ef29361b9e Signed-off-by: Pranith Kumar K <pkarampu@redhat.com>
* protocol: remove compound fopAmar Tumballi2019-04-295-4632/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Compound fops are kept on wire as a backward compatibility with older AFR modules. The AFR module used beyond 4.x releases are not using compound fops. Hence removing the compound fop in the protocol code. Note that, compound-fops was already an 'option' in AFR, and completely removed since 4.1.x releases. So, point to note is, with this change, we have 2 ways to upgrade when clients of 3.x series are present. i) set 'use-compound-fops' option to 'false' on any volume which is of replica type. And then upgrade the servers. ii) Do a two step upgrade. First from current version (which will already be EOL if it's using compound) to a 4.1..6.x version, and then an upgrade to 7.x. Consider the overall code which we are removing for the option seems quite high, I believe it is worth it. updates: bz#1693692 Signed-off-by: Amar Tumballi <amarts@redhat.com> Change-Id: I0a8876d0367a15e1410ec845f251d5d3097ee593
* Replace memdup() with gf_memdup()Vijay Bellur2019-04-121-2/+1
| | | | | | | | | memdup() and gf_memdup() have the same implementation. Removed one API as the presence of both can be confusing. Change-Id: I562130c668457e13e4288e592792872d2e49887e updates: bz#1193929 Signed-off-by: Vijay Bellur <vbellur@redhat.com>
* server.c: fix Coverity CID 1399758Yaniv Kaul2019-03-211-1/+2
| | | | | | | | | | | | 1399758 Dereference before null check It was introduced @ commit 67f48bfcc16a38052e6c9ae7c25e69b03b8ae008 updates: bz#789278 Signed-off-by: Yaniv Kaul <ykaul@redhat.com> Change-Id: I1424b008b240691fe2a8924e31c708d0fb4f362d
* glusterfsd: Brick is getting crash at the time of startupMohit Agrawal2019-03-131-5/+5
| | | | | | | | | | | | Problem: Brick is getting crash because graph was not activated at the time of accessing server_conf Solution: To avoid the crash check ctx->active before processing a request Change-Id: Ib112e0eace19189e45f430abdac5511c026bed47 fixes: bz#1687705 Signed-off-by: Mohit Agrawal <moagrawal@redhat.com>
* server.c: use dict_() funcs with key length.Yaniv Kaul2019-02-181-15/+19
| | | | | | | | | | | Changed to use the dict_() funcs which take the key length. This happens to also reduce work under the lock in one case as well. Compile-tested only! updates: bz#1193929 Signed-off-by: Yaniv Kaul <ykaul@redhat.com> Change-Id: I958fcc29e95286fe3c74178cae3f01a8b2db26f2
* protocol/server: Use SERVER_REQ_SET_ERROR correctly for dictsPranith Kumar K2019-02-151-275/+236
| | | | | | | | | | Removed op_errno based SERVER_REQ_SET_ERROR() calls which was dead-code. xdr_to_dict() calls have this check which is used in 4.0 version of xdr-to-dict. fixes bz#1676797 Change-Id: I6f56907c85576f1263a6ec04ed7e37f723b01ac3 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com>
* core: heketi-cli is throwing error "target is busy"Mohit Agrawal2019-01-311-2/+2
| | | | | | | | | | | | | | | | | | | | Problem: When rpc-transport-disconnect happens, server_connection_cleanup_flush_cbk() is supposed to call rpc_transport_unref() after open-files on that transport are flushed per transport.But open-fd-count is maintained in bound_xl->fd_count, which can be incremented/decremented cumulatively in server_connection_cleanup() by all transport disconnect paths. So instead of rpc_transport_unref() happening per transport, it ends up doing it only once after all the files on all the transports for the brick are flushed leading to rpc-leaks. Solution: To avoid races maintain fd_cnt at client instead of maintaining on brick Credits: Pranith Kumar Karampuri Change-Id: I6e8ea37a61f82d9aefb227c5b3ab57a7a36850e6 fixes: bz#1668190 Signed-off-by: Mohit Agrawal <moagrawal@redhat.com>
* core: heketi-cli is throwing error "target is busy"Mohit Agrawal2019-01-241-0/+17
| | | | | | | | | | | | | | | Problem: At the time of deleting block hosting volume through heketi-cli , it is throwing an error "target is busy". cli is throwing an error because brick is not detached successfully and brick is not detached due to race condition to cleanp xprt associated with detached brick Solution: To avoid xprt specifc race condition introduce an atomic flag on rpc_transport Change-Id: Id4ff1fe8375a63be71fb3343f455190a1b8bb6d4 fixes: bz#1668190 Signed-off-by: Mohit Agrawal <moagrawal@redhat.com>
* core: Resolve memory leak for brickMohit Agrawal2019-01-161-0/+2
| | | | | | | | | | | Problem: Some functions are not freeing memory allocated by xdr_to_genric so it has become leak Solution: Call free to avoid leak Change-Id: I3524fe2831d1511d378a032f21467edae3850314 fixes: bz#1656682 Signed-off-by: Mohit Agrawal <moagrawal@redhat.com>
* posix: stack-buffer-overflow reported by asanHarpreet Kaur2018-12-261-1/+2
| | | | | | | | | | | | This patch fixes buffer overflow in $SRC/xlators/storage/posix/src/posix-inode-fd-ops.c Memory access at offset 432 overflows "md5_checksum" variable. SUMMARY: AddressSanitizer: stack-buffer-overflow (/lib64/libasan.so.5+0xb825a) updates: bz#1633930 Change-Id: I46010a09161d02cdf0c69679a334ec1d3d49cffb Signed-off-by: Harpreet Kaur <hlalwani@redhat.com>
* copy_file_range support in GlusterFSRaghavendra Bhat2018-12-126-7/+199
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * libglusterfs changes to add new fop * Fuse changes: - Changes in fuse bridge xlator to receive and send responses * posix changes to perform the op on the backend filesystem * protocol and rpc changes for sending and receiving the fop * gfapi changes for performing the fop * tools: glfs-copy-file-range tool for testing copy_file_range fop - Although, copy_file_range support has been added to the upstream fuse kernel module, no release has been made yet of a kernel which contains the support. It is expected to come in the upcoming release of linux-4.20 So, as of now, executing copy_file_range fop on a fused based filesystem results in fuse kernel module sending read on the source fd and write on the destination fd. Therefore a small gfapi based tool has been written to be able test the copy_file_range fop. This tool is similar (in functionality) to the example program given in copy_file_range man page. So, running regular copy_file_range on a fuse mount point and running gfapi based glfs-copy-file-range tool gives some idea about how fast, the copy_file_range (or reflink) can be. On the local machine this was the result obtained. mount -t glusterfs workstation:new /mnt/glusterfs [root@workstation ~]# cd /mnt/glusterfs/ [root@workstation glusterfs]# ls file [root@workstation glusterfs]# cd [root@workstation ~]# time /tmp/a.out /mnt/glusterfs/file /mnt/glusterfs/new real 0m6.495s user 0m0.000s sys 0m1.439s [root@workstation ~]# time glfs-copy-file-range $(hostname) new /tmp/glfs.log /file /rrr OPEN_SRC: opening /file is success OPEN_DST: opening /rrr is success FSTAT_SRC: fstat on /rrr is success copy_file_range successful real 0m0.309s user 0m0.039s sys 0m0.017s This tool needs following arguments 1) hostname 2) volume name 3) log file path 4) source file path (relative to the gluster volume root) 5) destination file path (relative to the gluster volume root) "glfs-copy-file-range <hostname> <volume> <log file path> <source> <destination>" - Added a testcase as well to run glfs-copy-file-range tool * io-stats changes to capture the fop for profiling * NOTE: - Added conditional check to see whether the copy_file_range syscall is available or not. If not, then return ENOSYS. - Added conditional check for kernel minor version in fuse_kernel.h and fuse-bridge while referring to copy_file_range. And the kernel minor version is kept as it is. i.e. 24. Increment it in future when there is a kernel release which contains the support for copy_file_range fop in fuse kernel module. * The document which contains a writeup on this enhancement can be found at https://docs.google.com/document/d/1BSILbXr_knynNwxSyyu503JoTz5QFM_4suNIh2WwrSc/edit Change-Id: I280069c814dd21ce6ec3be00a884fc24ab692367 updates: #536 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com>
* libglusterfs: Move devel headers under glusterfs directoryShyamsundarR2018-12-0512-44/+44
| | | | | | | | | | | | | | | | | | | | | | | | libglusterfs devel package headers are referenced in code using include semantics for a program, this while it works can be better especially when dealing with out of tree xlator builds or in general out of tree devel package usage. Towards this, the following changes are done, - moved all devel headers under a glusterfs directory - Included these headers using system header notation <> in all code outside of libglusterfs - Included these headers using own program notation "" within libglusterfs This change although big, is just moving around the headers and making it correct when including these headers from other sources. This helps us correctly include libglusterfs includes without namespace conflicts. Change-Id: Id2a98854e671a7ee5d73be44da5ba1a74252423b Updates: bz#1193929 Signed-off-by: ShyamsundarR <srangana@redhat.com>
* protocol/server: support server.all-squashXie Changlong2018-12-052-19/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | We still use gnfs on our side, so do a little work to support server.all-squash. Just like server.root-squash, it's also a volume wide option. Also see bz#1285126 $ gluster volume set <VOLNAME> server.all-squash on Note: If you enable server.root-squash and server.all-squash at the same time, only server.all-squash works. Please refer to following table +---------------+-----------------+---------------------------+ | |all_squash | no_all_squash | +-------------------------------------------------------------+ | | |anonuid/anongid for root | |root_squash |anonuid/anongid |useruid/usergid for no-root| +-------------------------------------------------------------+ |no_root_squash |anonuid/anongid |useruid/usergid | +-------------------------------------------------------------+ Updates bz#1285126 Signed-off-by: Xie Changlong <xiechanglong@cmss.chinamobile.com> Signed-off-by: Xue Chuanyu <xuechuanyu@cmss.chinamobile.com> Change-Id: Iea043318fe6e9a75fa92b396737985062a26b47e
* rpc: bump up server.event-threadsMilind Changire2018-12-041-1/+1
| | | | | | | | | | | | | | | Problem: A single event-thread causes performance issues in the system. Solution: Bump up event-threads to 2 to make the system more performant. This helps in making the system more responsive and helps avoid the ping-timer-expiry problem as well. However, setting the event-threads to 2 is not the only thing required to avoid ping-timer-expiry issues. Change-Id: Idb0fd49e078db3bd5085dd083b0cdc77b59ddb00 fixes: bz#1653277 Signed-off-by: Milind Changire <mchangir@redhat.com>
* server: Resolve memory leak path in server_initMohit Agrawal2018-12-031-9/+45
| | | | | | | | | | | | | | Problem: 1) server_init does not cleanup allocate resources while it is failed before return error 2) dict leak at the time of graph destroying Solution: 1) free resources in case of server_init is failed 2) Take dict_ref of graph xlator before destroying the graph to avoid leak Change-Id: I9e31e156b9ed6bebe622745a8be0e470774e3d15 fixes: bz#1654917 Signed-off-by: Mohit Agrawal <moagrawal@redhat.com>
* Multiple xlator .h files: remove unused private gf_* memory types.Yaniv Kaul2018-11-301-6/+0
| | | | | | | | | | | | | It seems there were quite a few unused enums (that in turn cause unndeeded memory allocation) in some xlators. I've removed them, hopefully not causing any damage. Compile-tested only! updates: bz#1193929 Signed-off-by: Yaniv Kaul <ykaul@redhat.com> Change-Id: I8252bd763dc1506e2d922496d896cd2fc0886ea7
* rpcsvc: provide each request handler thread its own queueRaghavendra Gowdappa2018-11-291-6/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | A single global per program queue is contended by all request handler threads and event threads. This can lead to high contention. So, reduce the contention by providing each request handler thread its own private queue. Thanks to "Manoj Pillai"<mpillai@redhat.com> for the idea of pairing a single queue with a fixed request-handler-thread and event-thread, which brought down the performance regression due to overhead of queuing significantly. Thanks to "Xavi Hernandez"<xhernandez@redhat.com> for discussion on how to communicate the event-thread death to request-handler-thread. Thanks to "Karan Sandha"<ksandha@redhat.com> for voluntarily running the perf benchmarks to qualify that performance regression introduced by ping-timer-fixes is fixed with this patch and patiently running many iterations of regression tests while RCAing the issue. Thanks to "Milind Changire"<mchangir@redhat.com> for patiently running the many iterations of perf benchmarking tests while RCAing the regression caused by ping-timer-expiry fixes. Change-Id: I578c3fc67713f4234bd3abbec5d3fbba19059ea5 Fixes: bz#1644629 Signed-off-by: Raghavendra Gowdappa <rgowdapp@redhat.com>
* libglusterfs: rename macros roof and floor to not conflict with math.hRaghavendra Gowdappa2018-11-282-2/+2
| | | | | | Change-Id: I666eeb63ebd000711b3f793b948d4e0c04b1a242 Signed-off-by: Raghavendra Gowdappa <rgowdapp@redhat.com> Updates: bz#1644629
* core: create a constant for default network timeoutXavi Hernandez2018-11-231-1/+1
| | | | | | | | | | A new constant named GF_NETWORK_TIMEOUT has been defined and all references to the hard-coded timeout of 42 seconds have been replaced with this constant. Change-Id: Id30f5ce4f1230f9288d9e300538624bcf1a6da27 fixes: bz#1652852 Signed-off-by: Xavi Hernandez <xhernandez@redhat.com>
* all: fix the format string exceptionsAmar Tumballi2018-11-051-1/+1
| | | | | | | | | | | | | | | | Currently, there are possibilities in few places, where a user-controlled (like filename, program parameter etc) string can be passed as 'fmt' for printf(), which can lead to segfault, if the user's string contains '%s', '%d' in it. While fixing it, makes sense to make the explicit check for such issues across the codebase, by making the format call properly. Fixes: CVE-2018-14661 Fixes: bz#1644763 Change-Id: Ib547293f2d9eb618594cbff0df3b9c800e88bde4 Signed-off-by: Amar Tumballi <amarts@redhat.com>
* protocol: remove the option 'verify-volfile-checksum'Amar Tumballi2018-11-052-270/+4
| | | | | | | | | | | | | | | | 'getspec' operation is not used between 'client' and 'server' ever since we have off-loaded volfile management to glusterd, ie, at least 7 years. No reason to keep the dead code! The removed option had no meaning, as glusterd didn't provide a way to set (or unset) this option. So, no regression should be observed from any of the existing glusterfs deployment, supported or unsupported. Updates: CVE-2018-14653 Updates: bz#1644756 Change-Id: I4a2e0f673c5bcd4644976a61dbd2d37003a428eb Signed-off-by: Amar Tumballi <amarts@redhat.com>
* server: don't allow '/' in basenameAmar Tumballi2018-11-051-4/+17
| | | | | | | | | | | | | | | | Server stack needs to have all the sort of validation, assuming clients can be compromized. It is possible for a compromized client to send basenames with paths with '/', and with that create files without permission on server. By sanitizing the basename, and not allowing anything other than actual directory as the parent for any entry creation, we can mitigate the effects of clients not able to exploit the server. Fixes: CVE-2018-14651 Fixes: bz#1644755 Change-Id: I5dc0da0da2713452ff2b65ac2ddbccf1a267dc20 Signed-off-by: Amar Tumballi <amarts@redhat.com>
* server-protocol: set the frame type to TYPE_FOPAmar Tumballi2018-10-291-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This will allow proper printing of exact 'fop' type to be logged in string, not number, during backtraces. Considering this was not done on brick processes, we have no easy way to glance and understand which fops were pending. What gets changed: After a crash, most of the core-dumps logged were of the form: ``` pending frames: frame : type(0) op(18) frame : type(0) op(18) frame : type(0) op(28) ``` would change to ``` pending frames: frame : type(1) op(SETXATTR) frame : type(1) op(SETXATTR) frame : type(1) op(READDIR) ``` updates: bz#1639599 Change-Id: I0e3d2a8dee9cfde7ed0112a948f5213f546efb80 Signed-off-by: Amar Tumballi <amarts@redhat.com>
* protocol/server: added check for positve value in server-handshake.cArjun Sharma2018-10-211-2/+3
| | | | | | | | This patch fixes CID 1124651 Change-Id: I6f33954f08cfdd7cb4236f9a81ec7980f81d19e7 updates: bz#789278 Signed-off-by: Arjun <arjsharm@redhat.com>
* servers-helpers.c: reduce clang warnings on dead initialization.Yaniv Kaul2018-10-161-464/+177
| | | | | | | | | | | | Assign a value to a parameter on its definition. Removes tens of clang warnings. Compile-tested only! updates: bz#1193929 Signed-off-by: Yaniv Kaul <ykaul@redhat.com> Change-Id: I828bacb4033111af6162772a554cc5c6b2820169
* all: fix warnings on non 64-bits architecturesXavi Hernandez2018-10-101-2/+2
| | | | | | | | | | When compiling in other architectures there appear many warnings. Some of them are actual problems that prevent gluster to work correctly on those architectures. Change-Id: Icdc7107a2bc2da662903c51910beddb84bdf03c0 fixes: bz#1632717 Signed-off-by: Xavi Hernandez <xhernandez@redhat.com>
* rpc: coverity fixesMilind Changire2018-10-091-0/+2
| | | | | | | | | | | | | CID: [1] 1394646 Unchecked return value from library CID: [2] 1394633 Unused value CID: 1382443 Sleeping while holding a lock [This is intentional] [1] https://scan6.coverity.com/reports.htm#v40014/p10714/fileInstanceId=86159112&defectInstanceId=26360786&mergedDefectId=1394646 [2] https://scan6.coverity.com/reports.htm#v40014/p10714/fileInstanceId=86159365&defectInstanceId=26360919&mergedDefectId=1394633 Change-Id: I03086f7a9672c9f50a2bc44cdbce0006c887357b updates: bz#789278 Signed-off-by: Milind Changire <mchangir@redhat.com>
* core: glusterfsd keeping fd open in index xlatorMohit Agrawal2018-10-085-69/+223
| | | | | | | | | | | | | | Problem: Current resource cleanup sequence is not perfect while brick mux is enabled Solution: 1) Destroying xprt after cleanup all fd associated with a client 2) Before call fini for brick xlators ensure no stub should be running on a brick Change-Id: I86195785e428f57d3ef0da3e4061021fafacd435 fixes: bz#1631357 Signed-off-by: Mohit Agrawal <moagrawal@redhat.com>
* protocol/server: NULL pointer dereferencing clang fixShwetha K Acharya2018-09-172-4/+14
| | | | | | | | | | Problem: Access to field fop_length results in null pointer dereferencing. Solution: Added condition checks fix the issue. Change-Id: Id408e3ac62ea9574f0cd9aecce5434add09eb7d0 Updates: bz#1622665 Signed-off-by: Shwetha K Acharya <sacharya@redhat.com>
* Land part 2 of clang-format changesGluster Ant2018-09-128-17399/+17000
| | | | | Change-Id: Ia84cc24c8924e6d22d02ac15f611c10e26db99b4 Signed-off-by: Nigel Babu <nigelb@redhat.com>
generated by cgit (git 2.34.1) at 2024-04-25 13:01:58 +0000