1 files changed, 164 insertions, 0 deletions
diff --git a/tests/bugs/distribute/bug-1161311.t b/tests/bugs/distribute/bug-1161311.t
new file mode 100755
index 00000000000..62796068928
--- /dev/null
+++ b/tests/bugs/distribute/bug-1161311.t
@@ -0,0 +1,164 @@
+#!/bin/bash
+
+SCRIPT_TIMEOUT=350
+
+# This tests for hard link preservation for files that are linked, when the
+# file is undergoing migration
+
+# --- Improvements and other tests ---
+## Fail rebalance of the large file for which links are created during P1/2
+### phases of migration
+## Start with multiple hard links to the file and then create more during P1/2
+### phases of migration
+## Test the same with NFS as the mount rather than FUSE
+## Create links when file is under P2 of migration specifically
+## Test with quota, to error out during hard link creation (if possible)
+
+. $(dirname $0)/../../include.rc
+. $(dirname $0)/../../volume.rc
+
+cleanup
+TEST truncate -s 10GB $B0/brick1
+TEST truncate -s 10GB $B0/brick2
+TEST truncate -s 10GB $B0/brick3
+
+TEST LO1=`SETUP_LOOP $B0/brick1`
+TEST MKFS_LOOP $LO1
+
+TEST LO2=`SETUP_LOOP $B0/brick2`
+TEST MKFS_LOOP $LO2
+
+TEST LO3=`SETUP_LOOP $B0/brick3`
+TEST MKFS_LOOP $LO3
+
+TEST mkdir -p $B0/${V0}1 $B0/${V0}2  $B0/${V0}3
+
+
+TEST MOUNT_LOOP $LO1 $B0/${V0}1
+TEST MOUNT_LOOP $LO2 $B0/${V0}2
+TEST MOUNT_LOOP $LO3 $B0/${V0}3
+
+checksticky () {
+	i=0;
+	while [ ! -k $1 ]; do
+		sleep 1
+		i=$((i+1));
+		# Try for 10 seconds to get the sticky bit state
+		# else fail the test, as we may never see it
+		if [[ $i == 10 ]]; then
+			return $i
+		fi
+		echo "Waiting... $i"
+	done
+        echo "Done... got out @ $i"
+	return 0
+}
+
+
+TEST glusterd
+TEST pidof glusterd
+TEST $CLI volume info;
+
+TEST $CLI volume create $V0 $H0:$B0/${V0}{1..3};
+
+EXPECT "$V0" volinfo_field $V0 'Volume Name';
+EXPECT 'Created' volinfo_field $V0 'Status';
+EXPECT '3' brick_count $V0
+
+TEST $CLI volume set $V0 parallel-readdir on
+TEST $CLI volume start $V0;
+EXPECT 'Started' volinfo_field $V0 'Status';
+
+## Mount FUSE with caching disabled (read-write)
+TEST glusterfs -s $H0 --volfile-id $V0 $M0;
+
+# Create a directories to hold the links
+TEST mkdir $M0/dir1
+TEST mkdir -p $M0/dir2/dir3
+
+# Create a large file (8 GB), so that rebalance takes time
+# Since we really don't care about the contents of the file, we use fallocate
+# to generate the file much faster. We could also use truncate, which is even
+# faster, but rebalance could take advantage of an sparse file and migrate it
+# in an optimized way, but we don't want a fast migration.
+TEST fallocate -l 8G $M0/dir1/FILE2
+
+# Rename the file to create a linkto, for rebalance to
+# act on the file
+## FILE1 and FILE2 hashes are, 678b1c4a e22c1ada, so they fall
+## into separate bricks when brick count is 3
+TEST mv $M0/dir1/FILE2 $M0/dir1/FILE1
+
+brick_loc=$(get_backend_paths $M0/dir1/FILE1)
+
+# unmount and remount the volume
+EXPECT_WITHIN $UMOUNT_TIMEOUT "Y" force_umount $M0
+TEST glusterfs -s $H0 --volfile-id $V0 $M0;
+
+# Start the rebalance
+TEST $CLI volume rebalance $V0 start force
+
+# Wait for FILE to get the sticky bit on, so that file is under
+# active rebalance, before creating the links
+TEST checksticky $brick_loc
+
+# Create the links
+## FILE3 FILE5 FILE7 have hashes, c8c91469 566d26ce 22ce7eba
+## Which fall into separate bricks on a 3 brick layout
+cd $M0
+TEST ln ./dir1/FILE1 ./dir1/FILE7
+TEST ln ./dir1/FILE1 ./dir1/FILE5
+TEST ln ./dir1/FILE1 ./dir1/FILE3
+
+TEST ln ./dir1/FILE1 ./dir2/FILE7
+TEST ln ./dir1/FILE1 ./dir2/FILE5
+TEST ln ./dir1/FILE1 ./dir2/FILE3
+
+TEST ln ./dir1/FILE1 ./dir2/dir3/FILE7
+TEST ln ./dir1/FILE1 ./dir2/dir3/FILE5
+TEST ln ./dir1/FILE1 ./dir2/dir3/FILE3
+cd /
+
+# Ideally for this test to have done its job, the file should still be
+# under migration, so check the sticky bit again
+TEST checksticky $brick_loc
+
+# Wait for rebalance to complete
+EXPECT_WITHIN $REBALANCE_TIMEOUT "completed" rebalance_status_field $V0
+
+# Check if all files are clean and migrated right
+## stat on the original file should show linkcount of 10
+linkcountsrc=$(stat -c %h $M0/dir1/FILE1)
+TEST [[ $linkcountsrc == 10 ]]
+
+## inode and size of every file should be same as original file
+inodesrc=$(stat -c %i $M0/dir1/FILE1)
+TEST [[ $(stat -c %i $M0/dir1/FILE3) == $inodesrc ]]
+TEST [[ $(stat -c %i $M0/dir1/FILE5) == $inodesrc ]]
+TEST [[ $(stat -c %i $M0/dir1/FILE7) == $inodesrc ]]
+
+TEST [[ $(stat -c %i $M0/dir2/FILE3) == $inodesrc ]]
+TEST [[ $(stat -c %i $M0/dir2/FILE5) == $inodesrc ]]
+TEST [[ $(stat -c %i $M0/dir2/FILE7) == $inodesrc ]]
+
+TEST [[ $(stat -c %i $M0/dir2/dir3/FILE3) == $inodesrc ]]
+TEST [[ $(stat -c %i $M0/dir2/dir3/FILE5) == $inodesrc ]]
+TEST [[ $(stat -c %i $M0/dir2/dir3/FILE7) == $inodesrc ]]
+
+# Check, newer link creations
+cd $M0
+TEST ln ./dir1/FILE1 ./FILE1
+TEST ln ./dir2/FILE3 ./FILE3
+TEST ln ./dir2/dir3/FILE5 ./FILE5
+TEST ln ./dir1/FILE7 ./FILE7
+cd /
+linkcountsrc=$(stat -c %h $M0/dir1/FILE1)
+TEST [[ $linkcountsrc == 14 ]]
+
+
+# Stop the volume
+TEST $CLI volume stop $V0;
+
+UMOUNT_LOOP ${B0}/${V0}{1..3}
+rm -f ${B0}/brick{1..3}
+cleanup;