8 files changed, 415 insertions, 0 deletions
diff --git a/tests/basic/glusterd/arbiter-volume-probe.t b/tests/basic/glusterd/arbiter-volume-probe.t
new file mode 100644
index 00000000000..cb05f4ada42
--- /dev/null
+++ b/tests/basic/glusterd/arbiter-volume-probe.t
@@ -0,0 +1,25 @@
+#!/bin/bash
+
+. $(dirname $0)/../../include.rc
+. $(dirname $0)/../../cluster.rc
+
+#This tests if the arbiter-count is transferred to the other peer.
+function check_peers {
+        $CLI_1 peer status | grep 'Peer in Cluster (Connected)' | wc -l
+}
+
+cleanup;
+
+TEST launch_cluster 2;
+TEST $CLI_1 peer probe $H2;
+
+EXPECT_WITHIN $PROBE_TIMEOUT 1 check_peers
+
+kill_glusterd 2
+$CLI_1 volume create $V0 replica 3 arbiter 1 $H0:$B0/b{1..3}
+TEST $glusterd_2
+EXPECT_WITHIN $PROBE_TIMEOUT 1 check_peers
+EXPECT "1 x \(2 \+ 1\) = 3" volinfo_field_1 $V0 "Number of Bricks"
+EXPECT "1 x \(2 \+ 1\) = 3" volinfo_field_2 $V0 "Number of Bricks"
+
+cleanup;
diff --git a/tests/basic/glusterd/check-cloudsync-ancestry.t b/tests/basic/glusterd/check-cloudsync-ancestry.t
new file mode 100644
index 00000000000..ff6ffee8db7
--- /dev/null
+++ b/tests/basic/glusterd/check-cloudsync-ancestry.t
@@ -0,0 +1,48 @@
+#!/bin/bash
+
+. $(dirname $0)/../../include.rc
+. $(dirname $0)/../../volume.rc
+
+# When shard and cloudsync xlators enabled on a volume, shard xlator
+# should be an ancestor of cloudsync. This testcase is to check this condition.
+
+cleanup;
+TEST glusterd
+TEST pidof glusterd
+TEST $CLI volume create $V0 $H0:$B0/b1 $H0:$B0/b2 $H0:$B0/b3
+
+volfile=$(gluster system:: getwd)"/vols/$V0/trusted-$V0.tcp-fuse.vol"
+
+#Test that both shard and cloudsync are not loaded
+EXPECT "N" volgen_volume_exists $volfile $V0-shard features shard
+EXPECT "N" volgen_volume_exists $volfile $V0-cloudsync features cloudsync
+
+#Enable shard and cloudsync in that order and check if volfile is correct
+TEST $CLI volume set $V0 shard on
+TEST $CLI volume set $V0 cloudsync on
+
+#Test that both shard and cloudsync are loaded
+EXPECT "Y" volgen_volume_exists $volfile $V0-shard features shard
+EXPECT "Y" volgen_volume_exists $volfile $V0-cloudsync features cloudsync
+
+EXPECT "Y" volgen_check_ancestry $volfile features shard features cloudsync
+
+#Disable shard and cloudsync
+TEST $CLI volume set $V0 shard off
+TEST $CLI volume set $V0 cloudsync off
+
+#Test that both shard and cloudsync are not loaded
+EXPECT "N" volgen_volume_exists $volfile $V0-shard features shard
+EXPECT "N" volgen_volume_exists $volfile $V0-cloudsync features cloudsync
+
+#Enable cloudsync and shard in that order and check if volfile is correct
+TEST $CLI volume set $V0 cloudsync on
+TEST $CLI volume set $V0 shard on
+
+#Test that both shard and cloudsync are loaded
+EXPECT "Y" volgen_volume_exists $volfile $V0-shard features shard
+EXPECT "Y" volgen_volume_exists $volfile $V0-cloudsync features cloudsync
+
+EXPECT "Y" volgen_check_ancestry $volfile features shard features cloudsync
+
+cleanup;
diff --git a/tests/basic/glusterd/disperse-create.t b/tests/basic/glusterd/disperse-create.t
new file mode 100644
index 00000000000..db8a621d48e
--- /dev/null
+++ b/tests/basic/glusterd/disperse-create.t
@@ -0,0 +1,73 @@
+#!/bin/bash
+
+. $(dirname $0)/../../include.rc
+. $(dirname $0)/../../volume.rc
+
+# This command tests the volume create command validation for disperse volumes.
+
+cleanup;
+TEST glusterd
+TEST pidof glusterd
+TEST $CLI volume create $V0 disperse $H0:$B0/b1 $H0:$B0/b2 $H0:$B0/b3
+EXPECT "1 x \(2 \+ 1\) = 3" volinfo_field $V0 "Number of Bricks"
+
+TEST $CLI volume delete $V0
+TEST $CLI volume create $V0 disperse 3 $H0:$B0/b4 $H0:$B0/b5 $H0:$B0/b6
+EXPECT "1 x \(2 \+ 1\) = 3" volinfo_field $V0 "Number of Bricks"
+
+TEST $CLI volume delete $V0
+TEST $CLI volume create $V0 disperse 3 redundancy 1 $H0:$B0/b7 $H0:$B0/b8 $H0:$B0/b9
+EXPECT "1 x \(2 \+ 1\) = 3" volinfo_field $V0 "Number of Bricks"
+
+TEST $CLI volume delete $V0
+TEST $CLI volume create $V0 disperse-data 2 $H0:$B0/b10 $H0:$B0/b11 $H0:$B0/b12
+EXPECT "1 x \(2 \+ 1\) = 3" volinfo_field $V0 "Number of Bricks"
+
+TEST $CLI volume delete $V0
+TEST $CLI volume create $V0 redundancy 1 $H0:$B0/b10 $H0:$B0/b11 $H0:$B0/b12
+EXPECT "1 x \(2 \+ 1\) = 3" volinfo_field $V0 "Number of Bricks"
+
+TEST $CLI volume delete $V0
+TEST $CLI volume create $V0 disperse-data 2 redundancy 1 $H0:$B0/b11 $H0:$B0/b12 $H0:$B0/b13
+EXPECT "1 x \(2 \+ 1\) = 3" volinfo_field $V0 "Number of Bricks"
+
+TEST $CLI volume delete $V0
+TEST $CLI volume create $V0 disperse-data 2 redundancy 1 $H0:$B0/b11 $H0:$B0/b12 $H0:$B0/b13
+EXPECT "1 x \(2 \+ 1\) = 3" volinfo_field $V0 "Number of Bricks"
+
+TEST $CLI volume delete $V0
+TEST $CLI volume create $V0 disperse 3 disperse-data 2 $H0:$B0/b14 $H0:$B0/b15 $H0:$B0/b16
+EXPECT "1 x \(2 \+ 1\) = 3" volinfo_field $V0 "Number of Bricks"
+
+TEST $CLI volume delete $V0
+TEST $CLI volume create $V0 disperse 3 disperse-data 2 redundancy 1 $H0:$B0/b17 $H0:$B0/b18 $H0:$B0/b19
+EXPECT "1 x \(2 \+ 1\) = 3" volinfo_field $V0 "Number of Bricks"
+
+# -ve test cases
+#Key-words appearing more than once
+TEST ! $CLI volume create $V0 disperse 3 disperse 3 $H0:$B0/b20 $H0:$B0/b21 $H0:$B0/b22
+TEST ! $CLI volume create $V0 disperse-data 2 disperse-data 2 $H0:$B0/b20 $H0:$B0/b21 $H0:$B0/b22
+TEST ! $CLI volume create $V0 redundancy 1 redundancy 1 $H0:$B0/b20 $H0:$B0/b21 $H0:$B0/b22
+
+#Minimum counts test
+TEST ! $CLI volume create $V0 disperse 2 $H0:$B0/b20 $H0:$B0/b22
+TEST ! $CLI volume create $V0 disperse-data 1 redundancy 0 $H0:$B0/b20 $H0:$B0/b22
+TEST ! $CLI volume create $V0 disperse 4 disperse-data 4 $H0:$B0/b20 $H0:$B0/b21 $H0:$B0/b23 $H0:$B0/b24
+TEST ! $CLI volume create $V0 redundancy 0 $H0:$B0/b20 $H0:$B0/b22
+
+#Wrong count n != k+m
+TEST ! $CLI volume create $V0 disperse 4 disperse-data 4 redundancy 2 $H0:$B0/b20 $H0:$B0/b21 $H0:$B0/b22
+#Num bricks is not multiple of disperse count
+TEST ! $CLI volume create $V0 disperse 6 disperse-data 4 $H0:$B0/b20 $H0:$B0/b21 $H0:$B0/b22
+#Redundancy > data
+TEST ! $CLI volume create $V0 disperse 6 disperse-data 2 redundancy 4 $H0:$B0/b20 $H0:$B0/b21 $H0:$B0/b22
+TEST ! $CLI volume create $V0 disperse 4 disperse-data 2 redundancy 2 $H0:$B0/b20 $H0:$B0/b21 $H0:$B0/b22
+#Replica + Disperse
+TEST ! $CLI volume create $V0 disperse 4 replica 2 $H0:$B0/b20 $H0:$B0/b21 $H0:$B0/b22
+TEST ! $CLI volume create $V0 disperse-data 2 replica 2 $H0:$B0/b20 $H0:$B0/b21 $H0:$B0/b22 $H0:$B0/b23
+TEST ! $CLI volume create $V0 redundancy 2 replica 2 $H0:$B0/b20 $H0:$B0/b21 $H0:$B0/b22
+TEST ! $CLI volume create $V0 replica 2 disperse 4 $H0:$B0/b20 $H0:$B0/b21 $H0:$B0/b22
+TEST ! $CLI volume create $V0 replica 2 disperse-data 2 $H0:$B0/b20 $H0:$B0/b21 $H0:$B0/b22 $H0:$B0/b23
+TEST ! $CLI volume create $V0 replica 2 redundancy 2 $H0:$B0/b20 $H0:$B0/b21 $H0:$B0/b22
+
+cleanup
diff --git a/tests/basic/glusterd/heald.t b/tests/basic/glusterd/heald.t
new file mode 100644
index 00000000000..7dae3c3f0fb
--- /dev/null
+++ b/tests/basic/glusterd/heald.t
@@ -0,0 +1,92 @@
+#!/bin/bash
+
+. $(dirname $0)/../../include.rc
+. $(dirname $0)/../../volume.rc
+
+# This test contains volume heal commands handled by glusterd.
+# Covers enable/disable at the moment. Will be enhanced later to include
+# the other commands as well.
+
+function is_pid_running {
+    local pid=$1
+    num=`ps auxww | grep glustershd | grep $pid | grep -v grep | wc -l`
+    echo $num
+}
+
+cleanup;
+TEST glusterd
+TEST pidof glusterd
+
+#Commands should fail when volume doesn't exist
+TEST ! $CLI volume heal non-existent-volume enable
+TEST ! $CLI volume heal non-existent-volume disable
+
+# Glustershd shouldn't be running as long as there are no replicate/disperse
+# volumes
+TEST $CLI volume create dist $H0:$B0/dist
+TEST $CLI volume start dist
+TEST "[ -z $(get_shd_process_pid dist)]"
+TEST ! $CLI volume heal dist enable
+TEST ! $CLI volume heal dist disable
+
+# Commands should work on replicate/disperse volume.
+TEST $CLI volume create r2 replica 2 $H0:$B0/r2_0 $H0:$B0/r2_1
+TEST "[ -z $(get_shd_process_pid r2)]"
+TEST $CLI volume start r2
+EXPECT_WITHIN $PROCESS_UP_TIMEOUT "[0-9][0-9]*" get_shd_process_pid r2
+TEST $CLI volume heal r2 enable
+EXPECT "enable" volume_option r2 "cluster.self-heal-daemon"
+volfiler2=$(gluster system:: getwd)"/vols/r2/r2-shd.vol"
+EXPECT "enable" volgen_volume_option $volfiler2 r2-replicate-0 cluster replicate self-heal-daemon
+EXPECT_WITHIN $PROCESS_UP_TIMEOUT "[0-9][0-9]*" get_shd_process_pid r2
+pid=$( get_shd_process_pid r2 )
+TEST $CLI volume heal r2 disable
+EXPECT "disable" volume_option r2 "cluster.self-heal-daemon"
+EXPECT "disable" volgen_volume_option $volfiler2 r2-replicate-0 cluster replicate self-heal-daemon
+EXPECT "1" is_pid_running $pid
+
+# Commands should work on disperse volume.
+TEST $CLI volume create ec2 disperse 3 redundancy 1 $H0:$B0/ec2_0 $H0:$B0/ec2_1 $H0:$B0/ec2_2
+TEST $CLI volume start ec2
+EXPECT_WITHIN $PROCESS_UP_TIMEOUT "[0-9][0-9]*" get_shd_process_pid ec2
+TEST $CLI volume heal ec2 enable
+EXPECT "enable" volume_option ec2 "cluster.disperse-self-heal-daemon"
+volfileec2=$(gluster system:: getwd)"/vols/ec2/ec2-shd.vol"
+EXPECT "enable" volgen_volume_option $volfileec2 ec2-disperse-0 cluster disperse self-heal-daemon
+EXPECT_WITHIN $PROCESS_UP_TIMEOUT "[0-9][0-9]*" get_shd_process_pid ec2
+pid=$(get_shd_process_pid ec2)
+TEST $CLI volume heal ec2 disable
+EXPECT "disable" volume_option ec2 "cluster.disperse-self-heal-daemon"
+EXPECT "disable" volgen_volume_option $volfileec2 ec2-disperse-0 cluster disperse self-heal-daemon
+EXPECT "1" is_pid_running $pid
+
+#Check that shd graph is rewritten correctly on volume stop/start
+EXPECT "Y" volgen_volume_exists $volfileec2 ec2-disperse-0 cluster disperse
+
+EXPECT "Y" volgen_volume_exists $volfiler2 r2-replicate-0 cluster replicate
+TEST $CLI volume stop r2
+EXPECT "Y" volgen_volume_exists $volfileec2 ec2-disperse-0 cluster disperse
+TEST $CLI volume stop ec2
+# When both the volumes are stopped glustershd volfile is not modified just the
+# process is stopped
+TEST "[ -z $(get_shd_process_pid dist) ]"
+TEST "[ -z $(get_shd_process_pid ec2) ]"
+
+TEST $CLI volume start r2
+EXPECT "Y" volgen_volume_exists $volfiler2 r2-replicate-0 cluster replicate
+
+TEST $CLI volume set r2 self-heal-daemon on
+TEST $CLI volume set r2 cluster.self-heal-daemon off
+TEST ! $CLI volume set ec2 self-heal-daemon off
+TEST ! $CLI volume set ec2 cluster.self-heal-daemon on
+TEST ! $CLI volume set dist self-heal-daemon off
+TEST ! $CLI volume set dist cluster.self-heal-daemon on
+
+TEST $CLI volume set ec2 disperse-self-heal-daemon off
+TEST $CLI volume set ec2 cluster.disperse-self-heal-daemon on
+TEST ! $CLI volume set r2 disperse-self-heal-daemon on
+TEST ! $CLI volume set r2 cluster.disperse-self-heal-daemon off
+TEST ! $CLI volume set dist disperse-self-heal-daemon off
+TEST ! $CLI volume set dist cluster.disperse-self-heal-daemon on
+
+cleanup
diff --git a/tests/basic/glusterd/thin-arbiter-volume-probe.t b/tests/basic/glusterd/thin-arbiter-volume-probe.t
new file mode 100644
index 00000000000..acc6943806d
--- /dev/null
+++ b/tests/basic/glusterd/thin-arbiter-volume-probe.t
@@ -0,0 +1,25 @@
+#!/bin/bash
+
+. $(dirname $0)/../../include.rc
+. $(dirname $0)/../../cluster.rc
+
+#This tests if the thin-arbiter-count is transferred to the other peer.
+function check_peers {
+        $CLI_1 peer status | grep 'Peer in Cluster (Connected)' | wc -l
+}
+
+cleanup;
+
+TEST launch_cluster 2;
+TEST $CLI_1 peer probe $H2;
+
+EXPECT_WITHIN $PROBE_TIMEOUT 1 check_peers
+
+kill_glusterd 2
+$CLI_1 volume create $V0 replica 2 thin-arbiter 1 $H0:$B0/b{1..3}
+TEST $glusterd_2
+EXPECT_WITHIN $PROBE_TIMEOUT 1 check_peers
+EXPECT "1 x 2 = 2" volinfo_field_1 $V0 "Number of Bricks"
+EXPECT "1 x 2 = 2" volinfo_field_2 $V0 "Number of Bricks"
+
+cleanup;
diff --git a/tests/basic/glusterd/thin-arbiter-volume.t b/tests/basic/glusterd/thin-arbiter-volume.t
new file mode 100644
index 00000000000..4e813890a45
--- /dev/null
+++ b/tests/basic/glusterd/thin-arbiter-volume.t
@@ -0,0 +1,45 @@
+#!/bin/bash
+
+. $(dirname $0)/../../include.rc
+. $(dirname $0)/../../ volume.rc
+. $(dirname $0)/../../thin-arbiter.rc
+
+#This command tests the volume create command validation for thin-arbiter volumes.
+
+cleanup;
+
+TEST glusterd
+TEST pidof glusterd
+
+TEST $CLI volume create $V0 replica 2 thin-arbiter 1 $H0:$B0/b1 $H0:$B0/b2 $H0:$B0/b3
+EXPECT "1 x 2 = 2" volinfo_field $V0 "Number of Bricks"
+TEST $CLI volume start $V0
+
+TEST $GFS --volfile-id=$V0 --volfile-server=$H0 $M0;
+
+TEST touch $M0/a.txt
+TEST ls $B0/b1/a.txt 
+TEST ls $B0/b2/a.txt 
+TEST ! ls $B0/b3/a.txt
+
+TEST umount $M0
+TEST $CLI volume stop $V0
+TEST $CLI volume delete $V0
+
+TEST $CLI volume create $V0 replica 2 thin-arbiter 1 $H0:$B0/b{4..8}
+EXPECT "2 x 2 = 4" volinfo_field $V0 "Number of Bricks"
+
+TEST $CLI volume delete $V0
+
+TEST rm -rf $B0/b{1..3}
+
+TEST $CLI volume create $V0 replica 2 thin-arbiter 1 $H0:$B0/b1 $H0:$B0/b2 $H0:$B0/b3
+EXPECT "1 x 2 = 2" volinfo_field $V0 "Number of Bricks"
+
+TEST killall -15 glusterd
+TEST glusterd
+TEST pidof glusterd
+EXPECT "1 x 2 = 2" volinfo_field $V0 "Number of Bricks"
+
+cleanup
+
diff --git a/tests/basic/glusterd/volfile_server_switch.t b/tests/basic/glusterd/volfile_server_switch.t
new file mode 100644
index 00000000000..e11cfed509a
--- /dev/null
+++ b/tests/basic/glusterd/volfile_server_switch.t
@@ -0,0 +1,46 @@
+#!/bin/bash
+
+. $(dirname $0)/../../include.rc
+. $(dirname $0)/../../volume.rc
+. $(dirname $0)/../../cluster.rc
+
+
+cleanup;
+
+# * How this test works ?
+# 1. create a 3 node cluster
+# 2. add them to trusted pool
+# 3. create a volume and start
+# 4. mount the volume with all 3 backup-volfile servers
+# 5. kill glusterd in node 1
+# 6. make changes to volume using node 2, using 'volume set' here
+# 7. check whether those notifications are received by client
+
+TEST launch_cluster 3;
+
+TEST $CLI_1 peer probe $H2;
+EXPECT_WITHIN $PROBE_TIMEOUT 1 peer_count
+
+TEST $CLI_1 peer probe $H3;
+EXPECT_WITHIN $PROBE_TIMEOUT 2 peer_count
+
+TEST $CLI_1 volume create $V0 $H1:$B1/$V0 $H2:$B2/$V0 $H3:$B3/$V0
+
+TEST $CLI_1 volume start $V0
+
+TEST $CLI_1 volume status $V0;
+
+TEST glusterfs --volfile-id=/$V0 --volfile-server=$H1 --volfile-server=$H2 --volfile-server=$H3  $M0
+
+TEST kill_glusterd 1
+
+TEST $CLI_2 volume set $V0 performance.write-behind off
+
+# make sure by this time directory will be created
+# TODO: suggest ideal time to wait
+sleep 5
+
+count=$(find $M0/.meta/graphs/* -maxdepth 0 -type d -iname "*" | wc -l)
+TEST [ "$count" -gt "1" ]
+
+cleanup;
diff --git a/tests/basic/glusterd/volume-brick-count.t b/tests/basic/glusterd/volume-brick-count.t
new file mode 100644
index 00000000000..dc1a5278f4f
--- /dev/null
+++ b/tests/basic/glusterd/volume-brick-count.t
@@ -0,0 +1,61 @@
+#!/bin/bash
+
+. $(dirname $0)/../../include.rc
+. $(dirname $0)/../../volume.rc
+
+function test_volume_config()
+{
+        volname=$1
+        type_string=$2
+        brickCount=$3
+        distCount=$4
+        replicaCount=$5
+        arbiterCount=$6
+        disperseCount=$7
+        redundancyCount=$8
+
+        EXPECT "$type_string" volinfo_field $volname "Number of Bricks"
+        EXPECT "$brickCount" get-xml "volume info $volname" "brickCount"
+        EXPECT "$distCount" get-xml "volume info $volname" "distCount"
+        EXPECT "$replicaCount" get-xml "volume info $volname" "replicaCount"
+        EXPECT "$arbiterCount" get-xml "volume info $volname" "arbiterCount"
+        EXPECT "$disperseCount" get-xml "volume info $volname" "disperseCount"
+        EXPECT "$redundancyCount" get-xml "volume info $volname" "redundancyCount"
+}
+
+# This command tests the volume create command and number of bricks for different volume types.
+cleanup;
+TESTS_EXPECTED_IN_LOOP=56
+TEST glusterd
+TEST pidof glusterd
+
+TEST $CLI volume create ${V0}_1 replica 3 arbiter 1 $H0:$B0/b1 $H0:$B0/b2 $H0:$B0/b3
+test_volume_config "${V0}_1" "1 x \(2 \+ 1\) = 3" "3" "1" "3" "1" "0" "0"
+
+TEST $CLI volume create ${V0}_2 replica 3 arbiter 1 $H0:$B0/b{4..9}
+test_volume_config "${V0}_2" "2 x \(2 \+ 1\) = 6" "6" "2" "3" "1" "0" "0"
+
+
+TEST $CLI volume create ${V0}_3 replica 3 arbiter 1 $H0:$B0/b{10..12}
+test_volume_config "${V0}_3" "1 x \(2 \+ 1\) = 3" "3" "1" "3" "1" "0" "0"
+TEST killall -15 glusterd
+TEST glusterd
+TEST pidof glusterd
+test_volume_config "${V0}_3" "1 x \(2 \+ 1\) = 3" "3" "1" "3" "1" "0" "0"
+
+TEST $CLI volume create ${V0}_4 replica 3 $H0:$B0/b{13..15}
+test_volume_config "${V0}_4" "1 x 3 = 3" "3" "1" "3" "0" "0" "0"
+
+TEST $CLI volume create ${V0}_5 replica 3 $H0:$B0/b{16..21}
+test_volume_config "${V0}_5" "2 x 3 = 6" "6" "2" "3" "0" "0" "0"
+
+TEST $CLI volume create ${V0}_6 disperse 3 redundancy 1 $H0:$B0/b{22..24}
+test_volume_config "${V0}_6" "1 x \(2 \+ 1\) = 3" "3" "1" "1" "0" "3" "1"
+
+TEST $CLI volume create ${V0}_7 disperse 3 redundancy 1 $H0:$B0/b{25..30}
+test_volume_config "${V0}_7" "2 x \(2 \+ 1\) = 6" "6" "2" "1" "0" "3" "1"
+
+TEST $CLI volume create ${V0}_8 $H0:$B0/b{31..33}
+test_volume_config "${V0}_8" "3" "3" "3" "1" "0" "0" "0"
+
+cleanup