summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--Makefile.am5
-rw-r--r--extras/Makefile.am2
-rwxr-xr-xextras/clang-checker.sh301
3 files changed, 306 insertions, 2 deletions
diff --git a/Makefile.am b/Makefile.am
index d36f53055ea..180f149e328 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -47,7 +47,10 @@ dist-hook: gen-VERSION gen-ChangeLog
-cp -f $(top_srcdir)/build-aux/config.sub.dist $(distdir)/config.sub
-cp -f $(top_srcdir)/build-aux/config.guess.dist $(distdir)/config.guess
-.PHONY: gen-VERSION gen-ChangeLog
+.PHONY: gen-VERSION gen-ChangeLog clang-check
+
+clang-check:
+ @$(top_srcdir)/extras/clang-checker.sh
gen-ChangeLog:
(cd $(srcdir) && git diff && echo ===== git log ==== && git log) > $(distdir)/ChangeLog
diff --git a/extras/Makefile.am b/extras/Makefile.am
index 609d497f5b8..91c25c65fe6 100644
--- a/extras/Makefile.am
+++ b/extras/Makefile.am
@@ -22,7 +22,7 @@ EXTRA_DIST = $(conf_DATA) specgen.scm glusterfs-mode.el glusterfs.vim \
disk_usage_sync.sh clear_xattrs.sh glusterd-sysconfig glusterd.vol \
post-upgrade-script-for-quota.sh pre-upgrade-script-for-quota.sh \
command-completion/gluster.bash command-completion/Makefile \
- command-completion/README stop-all-gluster-processes.sh
+ command-completion/README stop-all-gluster-processes.sh clang-checker.sh
install-data-local:
if [ -n "$(tmpfilesdir)" ]; then \
diff --git a/extras/clang-checker.sh b/extras/clang-checker.sh
new file mode 100755
index 00000000000..4909d3adfcd
--- /dev/null
+++ b/extras/clang-checker.sh
@@ -0,0 +1,301 @@
+#!/usr/bin/env bash
+#*******************************************************************************
+# *
+# Copyright (c) 2016 Red Hat, Inc. <http://www.redhat.com> *
+# This file is part of GlusterFS. *
+# *
+# This file is licensed to you under your choice of the GNU Lesser *
+# General Public License, version 3 or any later version (LGPLv3 or *
+# later), or the GNU General Public License, version 2 (GPLv2), in all *
+# cases as published by the Free Software Foundation. *
+#------------------------------------------------------------------------------*
+# *
+# clang-checker.sh: This script runs clang static analyzer using 'scan-build' *
+# a perl wrapper. After you commit your patch i.e. right *
+# before executing rfc.sh in order to push the patch to *
+# repository, it is recommended that you execute *
+# clang-checker.sh to perform static analysis inorder to *
+# check if there are any possible bugs in the code. *
+# *
+# This script performs the static analysis with and *
+# without HEAD commit, it runs the analyzer only in the *
+# directory where changes have been made and finally diff's *
+# the number of bugs using both cases (i.e. with and *
+# without your commit) and gives a summary, which explain's *
+# about the eligibility of your patch. *
+# *
+# Usage: $ cd $PATH_TO_GLUSTERFS *
+# $ extras/clang-checker.sh (or) $ make clang-check *
+# *
+# Author: Prasanna Kumar Kalever <prasanna.kalever@redhat.com> *
+# *
+#*******************************************************************************
+
+REPORTS_DIR=$(pwd)
+BASELINE_DIR=${REPORTS_DIR}/baseline
+BRESULTS_DIR=${BASELINE_DIR}/results
+BBACKUP_DIR=${BASELINE_DIR}/backup
+TARGET_DIR=${REPORTS_DIR}/target
+TRESULTS_DIR=${TARGET_DIR}/results
+TBACKUP_DIR=${TARGET_DIR}/backup
+
+declare -A DICT_B
+declare -A DICT_T
+declare -A ARR
+declare -A FILES
+
+function identify_changes () {
+ MODIFIED_DATA=$(git show --name-status --oneline | tail -n +2)
+ FLAG=0
+ for i in ${MODIFIED_DATA}; do
+ if [ $FLAG -eq 1 ]; then
+ ARR+="$(dirname $i) ";
+ FLAG=0;
+ fi
+ if [ $i = 'M' ] || [ $i = 'A' ]; then
+ FLAG=1;
+ fi
+ done
+
+ MODIFIED_DIR=$(echo "${ARR[@]}" | tr ' ' '\n' | sort -u | tr '\n' ' ')
+ for i in $MODIFIED_DIR; do
+ # run only in directories which has Makefile
+ if [ $(find ./$i -iname "makefile*" | wc -c) -gt 0 ]; then
+ # skip 'doc' and '.'(top) directory
+ if [ "xx$i" != "xxdoc" ] && [ "xx$i" != "xx." ]; then
+ FILES+="$i "
+ fi
+ fi
+ done
+ if [ -z $FILES ]; then
+ echo "Probably no changes made to 'c' files"
+ exit;
+ fi
+}
+
+function check_prerequisites () {
+ if ! type "clang" 2> /dev/null; then
+ echo -e "\ntry after installing clang and scan-build..."
+ echo "useful info at http://clang-analyzer.llvm.org/installation.html\n"
+ echo -e "hint: 'dnf -y install clang-analyzer.noarch'\n"
+ exit 1;
+ elif ! type "scan-build" 2> /dev/null; then
+ echo -e "\ntry after installing scan-build..."
+ echo "useful info at http://clang-analyzer.llvm.org/installation.html"
+ echo -e "hint: 'dnf -y install clang-analyzer.noarch'\n"
+ exit 1;
+ fi
+}
+
+function force_terminate () {
+ echo -e "\nreceived a signal to force terminate ..\n"
+ git am --abort 2> /dev/null
+ git am ${PATCH_NAME}
+ rm -f ${REPORTS_DIR}/${PATCH_NAME}
+ exit 1;
+}
+
+function run_scanbuild () {
+ local CLANG=$(which clang)
+ local SCAN_BUILD=$(which scan-build)
+ local ORIG_COMMIT=$(git rev-parse --verify HEAD^)
+ PATCH_NAME=$(git format-patch $ORIG_COMMIT)
+
+ echo -e "\n| Performing clang analysis on:" \
+ "$(git log --pretty=format:"%h - '%s' by %an" -1) ... |\n"
+ echo -e "Changes are identified in '${FILES[@]}' directorie[s]\n"
+
+ if [ -d "${BRESULTS_DIR}" ]; then
+ mkdir -p ${BBACKUP_DIR} ${TBACKUP_DIR}
+ mv ${BRESULTS_DIR} \
+ ${BBACKUP_DIR}/results_$(ls -l ${BBACKUP_DIR} | wc -l)
+ mv ${TRESULTS_DIR} \
+ ${TBACKUP_DIR}/results_$(ls -l ${TBACKUP_DIR} | wc -l)
+ fi
+ for DIR in ${FILES[@]}; do
+ mkdir -p ${BRESULTS_DIR}/$(echo ${DIR} | sed 's/\//_/g')
+ mkdir -p ${TRESULTS_DIR}/$(echo ${DIR} | sed 's/\//_/g')
+ done
+ # get nproc info
+ case $(uname -s) in
+ 'Linux')
+ local NPROC=$(getconf _NPROCESSORS_ONLN)
+ ;;
+ 'NetBSD')
+ local NPROC=$(getconf NPROCESSORS_ONLN)
+ ;;
+ esac
+
+ trap force_terminate INT TERM QUIT EXIT
+
+ git reset --hard HEAD^
+
+ # build complete source code for sake of dependencies
+ echo -e "\n# make -j${NPROC} ..."
+ make -j${NPROC} 1>/dev/null
+
+ for DIR in ${FILES[@]}; do
+ if [ $(find ./$i -iname "makefile*" | wc -c) -gt 0 ]; then
+ make clean -C ${DIR} 1>/dev/null
+ echo -e "\n| Analyzing ${DIR} without commit ... |\n"
+ # run only in directory where changes are made
+ ${SCAN_BUILD} -o ${BRESULTS_DIR}/$(echo ${DIR} | sed 's/\//_/g') \
+ --use-analyzer=${CLANG} make -j${NPROC} -C ${DIR}
+ fi
+ done
+
+ echo -e "\n| Analyzing without commit complete ... |\n"
+
+ git am ${PATCH_NAME}
+ trap - INT TERM QUIT EXIT
+
+ # In case commit has changes to configure stuff ?
+ echo -e "\n# make clean ..."
+ make clean 1>/dev/null
+ echo -e "\n# ./autogen.sh && ./configure --with-previous-options ..."
+ ${REPORTS_DIR}/autogen.sh 2>/dev/null
+ ${REPORTS_DIR}/configure --with-previous-options 1>/dev/null
+ echo -e "\n# make -j${NPROC} ..."
+ make -j${NPROC} 1>/dev/null
+
+ for DIR in ${FILES[@]}; do
+ if [ $(find ./$i -iname "makefile*" | wc -c) -gt 0 ]; then
+ make clean -C ${DIR} 1>/dev/null
+ echo -e "\n| Analyzing ${DIR} with commit ... |\n"
+ # run only in directory where changes are made
+ ${SCAN_BUILD} -o ${TRESULTS_DIR}/$(echo ${DIR} | sed 's/\//_/g') \
+ --use-analyzer=${CLANG} make -j${NPROC} -C ${DIR}
+ fi
+ done
+
+ echo -e "\n| Analyzing with commit complete ... |\n"
+
+ rm -f ${REPORTS_DIR}/${PATCH_NAME}
+}
+
+function count_for_baseline () {
+ for DIR in ${FILES[@]}; do
+ HTMLS_DIR=${BRESULTS_DIR}/$(echo ${DIR} |
+ sed 's/\//_/g')/$(ls ${BRESULTS_DIR}/$(echo ${DIR} |
+ sed 's/\//_/g')/);
+
+ local NAMES_OF_BUGS_B=$(grep -n "SUMM_DESC" ${HTMLS_DIR}/index.html |
+ cut -d"<" -f3 | cut -d">" -f2 |
+ sed 's/[^a-zA-Z0]/_/g' | tr '\n' ' ')
+ local NO_OF_BUGS_B=$(grep -n "SUMM_DESC" ${HTMLS_DIR}/index.html |
+ cut -d"<" -f5 | cut -d">" -f2 | tr '\n' ' ')
+ local count_B=0;
+
+ read -a BUG_NAME_B <<<$NAMES_OF_BUGS_B
+ read -a BUG_COUNT_B <<<$NO_OF_BUGS_B
+ for i in ${BUG_NAME_B[@]};
+ do
+ if [ ! -z ${DICT_B[$i]} ]; then
+ DICT_B[$i]=$(expr ${BUG_COUNT_B[count_B]} + ${DICT_B[$i]});
+ else
+ DICT_B+=([$i]=${BUG_COUNT_B[count_B]});
+ fi
+ count_B=$(expr $count_B + 1)
+ done
+ done
+
+ echo -e "\nBASELINE BUGS LIST (before applying patch):"
+ echo "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~"
+ for key_B in ${!DICT_B[@]}; do
+ echo "${key_B} --> ${DICT_B[${key_B}]}" | sed 's/_/ /g' | tr -s ' '
+ done
+}
+
+function count_for_target () {
+ for DIR in ${FILES[@]}; do
+ HTMLS_DIR=${TRESULTS_DIR}/$(echo ${DIR} |
+ sed 's/\//_/g')/$(ls ${TRESULTS_DIR}/$(echo ${DIR} |
+ sed 's/\//_/g')/);
+
+ local NAME_OF_BUGS_T=$(grep -n "SUMM_DESC" ${HTMLS_DIR}/index.html |
+ cut -d"<" -f3 | cut -d">" -f2 |
+ sed 's/[^a-zA-Z0]/_/g'| tr '\n' ' ')
+ local NO_OF_BUGS_T=$(grep -n "SUMM_DESC" ${HTMLS_DIR}/index.html |
+ cut -d"<" -f5 | cut -d">" -f2 | tr '\n' ' ')
+ local count_T=0;
+
+ read -a BUG_NAME_T <<<$NAME_OF_BUGS_T
+ read -a BUG_COUNT_T <<<$NO_OF_BUGS_T
+
+ for i in ${BUG_NAME_T[@]};
+ do
+ if [ ! -z ${DICT_T[$i]} ]; then
+ DICT_T[$i]=$(expr ${BUG_COUNT_T[count_T]} + ${DICT_T[$i]});
+ else
+ DICT_T+=([$i]=${BUG_COUNT_T[count_T]});
+ fi
+ count_T=$(expr $count_T + 1)
+ done
+ done
+
+ echo -e "\nTARGET BUGS LIST (after applying patch):"
+ echo "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~"
+ for key_T in ${!DICT_T[@]}; do
+ echo "${key_T} --> ${DICT_T[${key_T}]}" | sed 's/_/ /g' | tr -s ' '
+ done
+}
+
+function array_contains () {
+ local SEEKING=$1; shift
+ local IN=1
+ for ELEMENT; do
+ if [[ $ELEMENT == $SEEKING ]]; then
+ IN=0
+ break
+ fi
+ done
+ return $IN
+}
+
+function main () {
+ echo -e "\n================ Clang analyzer in progress ================\n"
+ check_prerequisites
+ identify_changes
+ run_scanbuild
+ clear
+ count_for_baseline
+ count_for_target
+ echo -e "\nSUMMARY OF CLANG-ANALYZER:"
+ echo "~~~~~~~~~~~~~~~~~~~~~~~~~~"
+
+ FLAG=0
+ for BUG in ${!DICT_T[@]}; do
+ array_contains $BUG "${!DICT_B[@]}"
+ if [ $? -eq 1 ]; then
+ echo "New ${DICT_T[${BUG}]} Bug[s] introduced: $(echo $BUG |
+ sed 's/_/ /g' |
+ tr -s ' ')"
+ FLAG=1
+ else
+ if [ ${BUG} != "All_Bugs" ]; then
+ if [ ${DICT_B[${BUG}]} -lt \
+ ${DICT_T[${BUG}]} ]; then
+ echo "Extra $(expr ${DICT_T[${BUG}]} - \
+ ${DICT_B[${BUG}]}) Bug[s] Introduced in: $(echo $BUG |
+ sed 's/_/ /g' | tr -s ' ')"
+ FLAG=1
+ fi
+ fi
+ fi
+ done
+
+ echo
+ if [ $FLAG -eq 0 ]; then
+ echo -e "Patch Value given by Clang analyzer '+1'\n"
+ else
+ echo -e "Patch Value given by Clang analyzer '-1'\n"
+ fi
+ echo -e "\nExplore complete results at:"
+ find ${BRESULTS_DIR}/ -iname "index.html"
+ find ${TRESULTS_DIR}/ -iname "index.html"
+ echo -e "\n================= Done with Clang Analysis =================\n"
+
+ exit ${FLAG}
+}
+
+main