summaryrefslogtreecommitdiffstats
path: root/xlators
Commit message (Collapse)AuthorAgeFilesLines
* performance/write-behind: fix use-after-free in readdirpRaghavendra Gowdappa2019-02-191-18/+22
| | | | | | | | | | | | | | | Two issues were found: 1. in wb_readdirp_cbk, inode should unrefed after wb_inode is unlocked. Otherwise, inode and hence the context wb_inode can be freed by the type we try to unlock wb_inode 2. wb_readdirp_mark_end iterates over a list of wb_inodes of children of a directory. But inodes could've been freed and hence the list might be corrupted. To fix take a reference on inode before adding it to invalidate_list of parent. Change-Id: I911b0e0b2060f7f41ded0b05db11af6f9b7c09c5 Signed-off-by: Raghavendra Gowdappa <rgowdapp@redhat.com> Updates: bz#1674406
* core: implement a global thread poolXavi Hernandez2019-02-189-27/+176
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements a thread pool that is wait-free for adding jobs to the queue and uses a very small locked region to get jobs. This makes it possible to decrease contention drastically. It's based on wfcqueue structure provided by urcu library. It automatically enables more threads when load demands it, and stops them when not needed. There's a maximum number of threads that can be used. This value can be configured. Depending on the workload, the maximum number of threads plays an important role. So it needs to be configured for optimal performance. Currently the thread pool doesn't self adjust the maximum for the workload, so this configuration needs to be changed manually. For this reason, the global thread pool has been made optional, so that volumes can still use the thread pool provided by io-threads. To enable it for bricks, the following option needs to be set: config.global-threading = on This option has no effect if bricks are already running. A restart is required to activate it. It's recommended to also enable the following option when running bricks with the global thread pool: performance.iot-pass-through = on To enable it for a FUSE mount point, the option '--global-threading' must be added to the mount command. To change it, an umount and remount is needed. It's recommended to disable the following option when using global threading on a mount point: performance.client-io-threads = off To enable it for services managed by glusterd, glusterd needs to be started with option '--global-threading'. In this case all daemons, like self-heal, will be using the global thread pool. Currently it can only be enabled for bricks, FUSE mounts and glusterd services. The maximum number of threads for clients and bricks can be configured using the following options: config.client-threads config.brick-threads These options can be applied online and its effect is immediate most of the times. If one of them is set to 0, the maximum number of threads will be calcutated as #cores * 2. Some distributions use a very old userspace-rcu library (version 0.7) for this reason, some header files from version 0.10 have been copied into contrib/userspace-rcu and are used if the detected version is 0.7 or older. An additional change has been made to io-threads to prevent that threads are started when iot-pass-through is set. Change-Id: I09d19e246b9e6d53c6247b29dfca6af6ee00a24b updates: #532 Signed-off-by: Xavi Hernandez <xhernandez@redhat.com>
* auth-cache.c: minor reduction of work under lock.Yaniv Kaul2019-02-181-6/+3
| | | | | | | | | | | Minor change to reduce work done under a lock. Also, remove unused variable (unrelated to the above). Compile-tested only! updates: bz#1193929 Signed-off-by: Yaniv Kaul <ykaul@redhat.com> Change-Id: I1dfb55823c3db7c638d8a34288423bd1faa37c32
* server.c: use dict_() funcs with key length.Yaniv Kaul2019-02-181-15/+19
| | | | | | | | | | | Changed to use the dict_() funcs which take the key length. This happens to also reduce work under the lock in one case as well. Compile-tested only! updates: bz#1193929 Signed-off-by: Yaniv Kaul <ykaul@redhat.com> Change-Id: I958fcc29e95286fe3c74178cae3f01a8b2db26f2
* md-cache.c: minor reduction of work under lock.Yaniv Kaul2019-02-181-4/+3
| | | | | | | | | | Take the time before taking the lock, not under lock. Compile-tested only! updates: bz#1193929 Signed-off-by: Yaniv Kaul <ykaul@redhat.com> Change-Id: I6cd05d8556a9bcc015e1be53f6ba46854e52a380
* protocol/server: Use SERVER_REQ_SET_ERROR correctly for dictsPranith Kumar K2019-02-151-275/+236
| | | | | | | | | | Removed op_errno based SERVER_REQ_SET_ERROR() calls which was dead-code. xdr_to_dict() calls have this check which is used in 4.0 version of xdr-to-dict. fixes bz#1676797 Change-Id: I6f56907c85576f1263a6ec04ed7e37f723b01ac3 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com>
* dht-shared.c: minor reduction of work under lock.Yaniv Kaul2019-02-141-6/+7
| | | | | | | | | | Minor changes to reduce work done under a lock. Compile-tested only! updates: bz#1193929 Signed-off-by: Yaniv Kaul <ykaul@redhat.com> Change-Id: Ia58adfb5125129e5d1f3bbf2202f38520fdbc29f
* storage/posix: print the actual file pathRaghavendra Bhat2019-02-141-54/+75
| | | | | | | | | | | | | posix converts incoming operations on files to operations on corresponding gfid handles. While this in itself is not a problem, logging of those gfid handles in place of actual file paths can create confusions during debugging. The best way would be to print both the actual file (recieved as an argument) for path based operations and the gfid handle associated with it. Change-Id: I408c36ca6456f2e3981b93151c19ef7f60085ad6 fixes: bz#1675076 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com>
* cluster/dht: Request linkto xattrs in dht_rmdir opendirN Balachandran2019-02-131-1/+26
| | | | | | | | | | | | | | | | | | If parallel-readdir is enabled, the rda xlator is loaded below dht in the graph and proactively lists and caches entries when an opendir is performed. dht_rmdir checks if the directory being deleted contains stale linkto files by performing a readdirp on its child subvols. However, as the entries are actually read in during the opendir operation which does not request the linkto xattr,no linkto xattrs are present for the entries causing dht to incorrectly identify them as data files and fail the rmdir operation with ENOTEMPTY. DHT now always adds the linkto xattr in the list of xattrs requested in the opendir. Change-Id: I0711198e66c59146282eb8b88084170bedfb4018 fixes: bz#1672851 Signed-off-by: N Balachandran <nbalacha@redhat.com>
* dht: fix double extra unref of inode at heal pathKinglong Mee2019-02-131-1/+1
| | | | | | | | | The loc_wipe is done in the _out_ section, inode_unref(loc.parent) here casues a double extra unref of loc.parent. Change-Id: I2dc809328d3d34bf7b02c7df9a4f97788af511e6 updates: bz#1651439 Signed-off-by: Kinglong Mee <mijinlong@open-fs.com>
* cluster/dht: Fix lookup selfheal and rmdir raceN Balachandran2019-02-131-9/+25
| | | | | | | | | | | | | | A race between the lookup selfheal and rmdir can cause directories to be healed only on non-hashed subvols. This can prevent the directory from being listed from the mount point and in turn causes rm -rf to fail with ENOTEMPTY. Fix: Update the layout information correctly and reduce the call count only after processing the response. Change-Id: I812779aaf3d7bcf24aab1cb158cb6ed50d212451 fixes: bz#1676400 Signed-off-by: N Balachandran <nbalacha@redhat.com>
* afr/shd: Cleanup self heal daemon resources during afr finiMohammed Rafi KC2019-02-122-0/+59
| | | | | | | | | We were not properly cleaning self-heal daemon resources during afr fini. This patch will clean the same. Change-Id: I597860be6f781b195449e695d871b8667a418d5a updates: bz#1659708 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com>
* performance/md-cache: change the op-version of "global-cache-invalidation"Raghavendra Gowdappa2019-02-122-2/+2
| | | | | | | | | Since release-6 is not done yet, this option can be introduced with GD_OP_VERSION_6_0. Change-Id: I8a0867e5b8b23d0d485704a2fc7a3efc4a90f637 Signed-off-by: Raghavendra Gowdappa <rgowdapp@redhat.com> updates: bz#1664934
* clnt/rpc: ref leak during disconnect.Mohammed Rafi KC2019-02-121-6/+26
| | | | | | | | | | During disconnect cleanup, we are not cancelling reconnect timer, which causes a ref leak each time when a disconnect happen. Change-Id: I9d05d1f368d080e04836bf6a0bb018bf8f7b5b8a updates: bz#1659708 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com>
* performance/md-cache: introduce an option to control invalidation of inodesRaghavendra Gowdappa2019-02-112-10/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Explicit invalidation by calling inode_invalidate is necessary when same (meta)data is shared/access across multiple mounts. Without an explicit inode_invalidate call, caches in the mount which didn't witness writes wouldn't be aware of changes as writes wouldn't have passed through them. However, if (meta)data is not shared, all relevant I/O goes through the cache of single mount and hence is coherent with (meta)data on bricks always. So, explicit inode invalidation can be disabled for this case which gives a huge performance boost for workloads that write data and then immediately read the data they just wrote. Note that otherwise, local writes (which pass through the cache) will change ctime and cause unnecessary invalidations. The name of the option that controls this behavior is "performance.global-cache-invalidation". This option is global and it purges caches both in glusterfs and kernel stack for native FUSE mounts. For non-native FUSE mounts, it purges cache only from glusterfs stack. This option is effective only when performance.stat-prefetch is on. Note that there is a similar option "performance.cache-invalidation", but the scope of that option is limited to quick-read and md-cache. Change-Id: I462bb4b65ff9aae1f6ba76f50b1f2f94fb10323b Signed-off-by: Raghavendra Gowdappa <rgowdapp@redhat.com> updates: bz#1664934
* mount/fuse: fix bug related to --auto-invalidation in mount scriptRaghavendra Gowdappa2019-02-091-1/+1
| | | | | | | | | | | | When "auto-invalidation" option was not specified for mount script, glusterfs cmdline ended with "--auto-invalidation=" option. This patch fixes that bug in mount script. Thanks to Amar for reporting it. Change-Id: Ie5cd4c6ffb3ac644d9d2b032035f914a935d05a8 Signed-off-by: Raghavendra Gowdappa <rgowdapp@redhat.com> updates: bz#1664934
* glusterd: improve loggingAtin Mukherjee2019-02-081-1/+3
| | | | | | | | | glusterd_resolve_all_bricks failure log should highlight the brick identifier. Updates: bz#1193929 Change-Id: I035b4650ef6a14bb1e1221d3bad1c40f9d43dbdd Signed-off-by: Atin Mukherjee <amukherj@redhat.com>
* fuse: correctly handle setxattr valuesXavi Hernandez2019-02-071-4/+16
| | | | | | | | | | The setxattr function receives a pointer to raw data, which may not be null-terminated. When this data needs to be interpreted as a string, an explicit null termination needs to be added before using the value. Change-Id: Id110f9b215b22786da5782adec9449ce38d0d563 updates: bz#1193929 Signed-off-by: Xavi Hernandez <xhernandez@redhat.com>
* glusterd: get-state command should not fail if any brick is gone badv7devSanju Rakonde2019-02-052-5/+7
| | | | | | | | | | | | | | | | | | | | | | Problem: get-state command will error out, if any of the underlying brick(s) of volume(s) in the cluster go bad. It is expected that get-state command should not error out, but should generate an output successfully. Solution: In glusterd_get_state(), a statfs call is made on the brick path for every bricks of the volumes to calculate the total and free memory available. If any of statfs call fails on any brick, we should not error out and should report total memory and free memory of that brick as 0. This patch also handles a statfs failure scenario in glusterd_store_retrieve_bricks(). fixes: bz#1672205 Change-Id: Ia9e8a1d8843b65949d72fd6809bd21d39b31ad83 Signed-off-by: Sanju Rakonde <srakonde@redhat.com>
* glusterd: manage upgrade to current masterAmar Tumballi2019-02-042-12/+13
| | | | | | | | | | | | | | | | | | | | | | Scenarios tested: * Upgrade the node when there are stripe / tiering and regular type of volumes are present. - All volumes are started fine (as the change was not on brick volfile) - For tier, the functionality may not even work, as changetimerecorder is not present. - 'gluster volume info' properly shows as 'NOT SUPPORTED' for stripe and tier type of volume. * Upgrade in a rolling upgrade scenario, where an old version is able to connect to higher master. - on a normal volume, if the volfile-server was new, the newer client volfiles needed to have utime xlator conditionally. - with this one change, all other changes seem to work fine. Change-Id: Ib2d3b69dafa02b2c695a735b13c1aa70aba07cb8 updates: bz#1635688 Signed-off-by: Amar Tumballi <amarts@redhat.com>
* cluster/dht: Do not use gfid-req in fresh lookupN Balachandran2019-02-022-8/+60
| | | | | | | | | | | | Fuse sets a random gfid-req value for a fresh lookup. Posix lookup will set this gfid on entries with missing gfids causing a GFID mismatch for directories. DHT will now ignore the Fuse provided gfid-req and use the GFID returned from other subvols to heal the missing gfid. Change-Id: I5f541978808f246ba4542564251e341ec490db14 fixes: bz#1670259 Signed-off-by: N Balachandran <nbalacha@redhat.com>
* mount/fuse: expose auto-invalidation as a mount optionRaghavendra Gowdappa2019-02-023-10/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Auto invalidation is necessary when same (meta)data is shared/access across multiple mounts. However, if (meta)data is not shared, all relevant I/O goes through the cache of single mount and hence is coherent with (meta)data on bricks always. So, fuse-auto-invalidation can be disabled for this case which gives a huge performance boost for workloads that write data and then immediately read the data they just wrote. From glusterfs --help, <snip> --auto-invalidation[=BOOL] controls whether fuse-kernel can auto-invalidate attribute, dentry and page-cache. Disable this only if same files/directories are not accessed across two different mounts concurrently [default: "on"] </snip> Details on how disabling auto-invalidation helped to reduce pgbench init times can be found at [1]. Time taken for pgbench init of scale 8000 was 8340s. That will be an improvement of 86% (59280s vs 8340s) with auto-invalidations turned off along with other optimizations. Just disabling auto-invalidation contributed 56% improvement by reducing the total time taken by 33260s. [1] https://www.spinics.net/lists/gluster-devel/msg25907.html Change-Id: I0ed730dba9064bd9c576ad1800170a21e100e1ce Signed-off-by: Raghavendra Gowdappa <rgowdapp@redhat.com> updates: bz#1664934
* core: make gf_thread_create() easier to useXavi Hernandez2019-02-014-23/+5
| | | | | | | | | | | | | | This patch creates a specific function to set the thread name using a string format and a variable argument list, like printf(). This function is used to set the thread name from gf_thread_create(), which now accepts a variable argument list to create the full name. It's not necessary anymore to use a local array to build the name of the thread. This is done automatically. Change-Id: Idd8d01fd462c227359b96e98699f8c6d962dc17c Updates: bz#1193929 Signed-off-by: Xavi Hernandez <xhernandez@redhat.com>
* cluster/thin-arbiter: Consider thin-arbiter before marking new entry changelogAshish Pandey2019-02-014-19/+87
| | | | | | | | | | | | | | | | If a fop to create an entry fails on one of the data brick, we mark the pending changelog on the entry on brick for which it was successful. This is done as part of post op phase to make sure that entry gets healed even if it gets renamed to some other path where its parent was not marked as bad. As it happens as part of post op, we should consider thin-arbiter to check if the brick, which was successful, is the good brick or not. This will avoide split brain and other issues. Change-Id: I12686675be98f02f70a5186b3ed748c541514d53 updates: bz#1662264 Signed-off-by: Ashish Pandey <aspandey@redhat.com>
* cluster/dht: Remove internal permission bitsN Balachandran2019-02-011-0/+6
| | | | | | | | | | | | | Rebalance sets the sgid and t bits on a file that is being migrated. These permissions are not removed in dht_readdirp_cbk when listing files causing them to show up on the mountpoint. We now remove these permissions if a non-linkto file has the linkto xattr set. Change-Id: I5c69b2ecfe2df804fe50faea903b242d01729596 fixes: bz#1669937 Signed-off-by: N Balachandran <nbalacha@redhat.com>
* feature/bitrot: Avoid thread creation if xlator is not enabledMohit Agrawal2019-01-311-8/+64
| | | | | | | | | | | | | Problem: Avoid thread creation for bitrot-stub for a volume if feature is not enabled Solution: Before thread creation check the flag if feature is enabled Updates: #475 Change-Id: I2c6cc35bba142d4b418cc986ada588e558512c8e Signed-off-by: Mohit Agrawal <moagrawal@redhat.com> Signed-off-by: Kotresh HR <khiremat@redhat.com>
* core: heketi-cli is throwing error "target is busy"Mohit Agrawal2019-01-311-2/+2
| | | | | | | | | | | | | | | | | | | | Problem: When rpc-transport-disconnect happens, server_connection_cleanup_flush_cbk() is supposed to call rpc_transport_unref() after open-files on that transport are flushed per transport.But open-fd-count is maintained in bound_xl->fd_count, which can be incremented/decremented cumulatively in server_connection_cleanup() by all transport disconnect paths. So instead of rpc_transport_unref() happening per transport, it ends up doing it only once after all the files on all the transports for the brick are flushed leading to rpc-leaks. Solution: To avoid races maintain fd_cnt at client instead of maintaining on brick Credits: Pranith Kumar Karampuri Change-Id: I6e8ea37a61f82d9aefb227c5b3ab57a7a36850e6 fixes: bz#1668190 Signed-off-by: Mohit Agrawal <moagrawal@redhat.com>
* readdir-ahead: do not zero-out iatt in fop cbkRavishankar N2019-01-311-20/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | ...when ctime is zero. ia_type and ia_gfid always need to be non-zero for things to work correctly. Problem: Commit c9bde3021202f1d5c5a2d19ac05a510fc1f788ac zeroed out the iatt buffer in the cbks of modification fops before unwinding if the ctime in the buffer was zero. This was causing the fops to fail: noticeable when AFR's 'consistent-metadata' option was enabled. (AFR zeros out the ctime when the option is set. See commit 4c4624c9bad2edf27128cb122c64f15d7d63bbc8). Fixes: -Do not zero out the ia_type and ia_gfid of the iatt buff under any circumstance. -Also, fixed _rda_inode_ctx_update_iatts() to always update these values from the incoming buf when ctime is zero. Otherwise we end up with zero ia_type and ia_gfid the first time the function is called *and* the incoming buf has ctime set to zero. fixes: bz#1670253 Reported-By:Michael Hanselmann <public@hansmi.ch> Change-Id: Ib72228892d42c3513c19fc6dfb543f2aa3489eca Signed-off-by: Ravishankar N <ravishankar@redhat.com>
* features/sdfs: disable by defaultAmar Tumballi2019-01-292-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the feature enabled, some of the performance testing results, specially those which create millions of small files, got approximately 4x regression compared to version before enabling this. On master without this patch: 765 creates/sec On master with this patch : 3380 creates/sec Also there seems to be regression caused by this in 'ls -l' workload. On master without this patch: 3030 files/sec On master with this patch : 16610 files/sec This is a feature added to handle multiple clients parallely operating (specially those which race for file creates with same name) on a single namespace/directory. Considering that is < 3% of Gluster's usecase right now, it makes sense to disable the feature by default, so we don't penalize the default users who doesn't bother about this usecase. Also note that the client side translators, specially, distribute, replicate and disperse already handle the issue upto 99.5% of the cases without SDFS, so it makes sense to keep the feature disabled by default. Credits: Shyamsunder <srangana@redhat.com> for running the tests and getting the numbers. Change-Id: Iec49ce1d82e621e9db25eb633fcb1d932e74f4fc Updates: bz#1670031 Signed-off-by: Amar Tumballi <amarts@redhat.com>
* Multiple files: reduce work while under lock.Yaniv Kaul2019-01-2913-117/+120
| | | | | | | | | | | | | | | | | Mostly, unlock before logging. In some cases, moved different code that was not needed to be under lock (for example, taking time, or malloc'ing) to be executed before taking the lock. Note: logging might be slightly less accurate in order, since it may not be done now under the lock, so order of logs is racy. I think it's a reasonable compromise. Compile-tested only! updates: bz#1193929 Signed-off-by: Yaniv Kaul <ykaul@redhat.com> Change-Id: I2438710016afc9f4f62a176ef1a0d3ed793b4f89
* features/shard: Ref shard inode while adding to fsync listKrutika Dhananjay2019-01-241-8/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PROBLEM: Lot of the earlier changes in the management of shards in lru, fsync lists assumed that if a given shard exists in fsync list, it must be part of lru list as well. This was found to be not true. Consider this - a file is FALLOCATE'd to a size which would make the number of participant shards to be greater than the lru list size. In this case, some of the resolved shards that are to participate in this fop will be evicted from lru list to give way to the rest of the shards. And once FALLOCATE completes, these shards are added to fsync list but without a ref. After the fop completes, these shard inodes are unref'd and destroyed while their inode ctxs are still part of fsync list. Now when an FSYNC is called on the base file and the fsync-list traversed, the client crashes due to illegal memory access. FIX: Hold a ref on the shard inode when adding to fsync list as well. And unref under following conditions: 1. when the shard is evicted from lru list 2. when the base file is fsync'd 3. when the shards are deleted. Change-Id: Iab460667d091b8388322f59b6cb27ce69299b1b2 fixes: bz#1669077 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com>
* afr/self-heal:Fix wrong type checkingRavishankar N2019-01-242-32/+9
| | | | | | | | | | gf_dirent struct has d_type variable which should check with DT_DIR istead of IA_IFDIR or IA_IFDIR has to compare with entry->d_stat.ia_type Change-Id: Idf1059ce2a590734bc5b6adaad73604d9a708804 updates: bz#1653359 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com>
* core: heketi-cli is throwing error "target is busy"Mohit Agrawal2019-01-241-0/+17
| | | | | | | | | | | | | | | Problem: At the time of deleting block hosting volume through heketi-cli , it is throwing an error "target is busy". cli is throwing an error because brick is not detached successfully and brick is not detached due to race condition to cleanp xprt associated with detached brick Solution: To avoid xprt specifc race condition introduce an atomic flag on rpc_transport Change-Id: Id4ff1fe8375a63be71fb3343f455190a1b8bb6d4 fixes: bz#1668190 Signed-off-by: Mohit Agrawal <moagrawal@redhat.com>
* performance/readdir-ahead: Fix deadlock in readdir ahead.Mohammed Rafi KC2019-01-231-4/+14
| | | | | | | | | | | | This patch fixes a lock contention in reaadir-ahead xlator. There are two issues, one is the processing of "." ".." entry while holding an fd_ctx lock. The other one is destroying the stack inside a fd_ctx lock. Change-Id: Id0bf83a3d9fea6b40015b8d167525c59c6cfa25e updates: bz#1659708 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com>
* posix: Change data type to dump nr_files to statedumpMohit Agrawal2019-01-231-1/+1
| | | | | | | | | | | | | Problem: In commit 2261e444a47ffffb5d64305efceee1d5a734cd75 wrong data type of nr_files was changed to dump nr_files to statedump so build is failing on 32bit environment Solution: Change data type to avoid errors Change-Id: Ifb4b19feda6e0e56d110b23351e7a0efd5bfa29b fixes: bz#1657607 Signed-off-by: Mohit Agrawal <moagrawal@redhat.com>
* rpc: use address-family option from vol fileMilind Changire2019-01-223-4/+19
| | | | | | | | | | | | | | | | | This patch helps enable IPv6 connections in the cluster. The default address-family is IPv4 without using this option explicitly. When address-family is set to "inet6" in the /etc/glusterfs/glusterd.vol file, the mount command-line also needs to have -o xlator-option="transport.address-family=inet6" added to it. This option also gets added to the brick command-line. Snapshot and gfapi use-cases should also use this option to pass in the inet6 address-family. Change-Id: I97db91021af27bacb6d7578e33ea4817f66d7270 fixes: bz#1635863 Signed-off-by: Milind Changire <mchangir@redhat.com>
* afr: not resolve splitbrains when copies are of same sizeIraj Jamali2019-01-221-18/+25
| | | | | | | | | | | | Automatic Splitbrain with size as policy must not resolve splitbrains when the copies are of same size. Determining if the sizes of copies are same and returning -1 in that case. updates: bz#1655052 Change-Id: I3d8e8b4d7962b070ed16c3ee02a1e5a926fd5eab Signed-off-by: Iraj Jamali <ijamali@redhat.com>
* locks/fencing: Add a security knob for fencingSusant Palai2019-01-223-9/+39
| | | | | | | | | | | | | There is a low level security issue with fencing since one client can preempt another client's lock. This patch does not completely eliminate the issue of a client misbehaving, but certainly it adds a security layer for default use cases that does not need fencing. Change-Id: I55cd15f2ed1ae0f2556e3d27a2ef4bc10fdada1c updates: #466 Signed-off-by: Susant Palai <spalai@redhat.com>
* cluster/dht: Delete invalid linkto files in rmdirN Balachandran2019-01-221-1/+4
| | | | | | | | | | | | rm -rf <dir> fails on dirs which contain linkto files that point to themselves because dht incorrectly thought that they were cached files after looking them up. The fix now treats them as invalid linkto files and deletes them. Change-Id: I376c72a5309714ee339c74485e02cfb4e29be643 fixes: bz#1667804 Signed-off-by: N Balachandran <nbalacha@redhat.com>
* glusterd: Avoid dict_leak in __glusterd_handle_cli_uuid_get functionMohit Agrawal2019-01-221-0/+2
| | | | | | Change-Id: Iefe08b136044495f6fa2b092c9e8c833efee1400 fixes: bz#1667905 Signed-off-by: Mohit Agrawal <moagrawal@redhat.com>
* glusterd: Resolve memory leak in get-state commandMohit Agrawal2019-01-211-0/+10
| | | | | | | | | In gluster get-state volumeoptions command there was some amount of leak observed. This fix resolves the identified leaks. Change-Id: Ibde5743d1136fa72c531d48bb1b0b5da0c0b82a1 fixes: bz#1667779 Signed-off-by: Mohit Agrawal <moagrawal@redhat.com>
* posix: fix coverity issueIraj Jamali2019-01-211-6/+1
| | | | | | | | | | Logically dead code CID: 1398468 Updates: bz#789278 Change-Id: I8713a0c51777eb64e617d00ab72fd1db4994b6ab Signed-off-by: Iraj Jamali <ijamali@redhat.com>
* afr: Splitbrain with size as policy must not resolve for directorySheetal Pamecha2019-01-211-2/+12
| | | | | | | | | | | | | | In automatic Splitbrain resolution when favorite child policy is set as size, split brain resolution must not work for directories. Currently, if a directory is in split brain with both copies having same size, the source is selected arbitrarily and healed. fixes: bz#1655050 Change-Id: I5739498639c17c89874cc577362e543adab55f5d Signed-off-by: Sheetal Pamecha <sheetal.pamecha08@gmail.com>
* quotad: fix wrong memory freeKinglong Mee2019-01-213-19/+7
| | | | | | | | | | | | | | | | 1. cli_req.dict.dict_val, It must be freed no metter operation error or success. Fix it as lookup "alloca" memory before decode. 2. args.xdata.xdata_val, It is allocated by "alloca", free is unneeded. 3. qd_nameless_lookup, It olny needs gfid, a gfs3_lookup_req argument is unneeded. Change-Id: I746dddf7f3d1465b1885af2644afe0bcf0a5665b fixes: bz#1656682 Signed-off-by: Kinglong Mee <mijinlong@open-fs.com>
* core: Feature added to accept CidrIp in auth.allowRinku Kothiya2019-01-182-5/+13
| | | | | | | | | | | | | | | Added functionality to gluster volume set auth.allow command to accept CIDR IP addresses. Modified few functions to isolate cidr feature so that it prevents other gluster commands such as peer probe to use cidr format ip. The functions are modified in such a way that they have an option to enable accepting of cidr format for other gluster commands if required in furture. updates: bz#1138841 Change-Id: Ie6734002a7078f1820e5df42d404411cce945e8b Credits: Mohit Agrawal Signed-off-by: Rinku Kothiya <rkothiya@redhat.com>
* lock: Add fencing supportSusant Palai2019-01-176-122/+708
| | | | | | | | | | | | | | | | | design reference: https://review.gluster.org/#/c/glusterfs-specs/+/21925/ This patch adds the lock preempt support. Note: The current model stores lock enforcement information as separate xattr on disk. There is another effort going in parallel to store this in stat(x) of the file. This patch is self sufficient to add fencing support. Based on the availability of the stat(x) support either I will rebase this patch or we can modify the necessary bits post merging this patch. Change-Id: If4a42f3e0afaee1f66cdb0360ad4e0c005b5b017 updates: #466 Signed-off-by: Susant Palai <spalai@redhat.com>
* core: Resolve memory leak for brickMohit Agrawal2019-01-162-0/+5
| | | | | | | | | | | Problem: Some functions are not freeing memory allocated by xdr_to_genric so it has become leak Solution: Call free to avoid leak Change-Id: I3524fe2831d1511d378a032f21467edae3850314 fixes: bz#1656682 Signed-off-by: Mohit Agrawal <moagrawal@redhat.com>
* posix: Convert several posix_private members to gf_atomicMohit Agrawal2019-01-155-48/+18
| | | | | | Change-Id: I629698d8ddf6f15428880bdc1501d36bc37b8ebb fixes: bz#1657607 Signed-off-by: Mohit Agrawal <moagrawal@redhat.com>
* core: Resolve dict_leak at the time of destroying graphMohit Agrawal2019-01-141-4/+0
| | | | | | | | | | | | Problem: In gluster code some of the places it call's get_new_dict to create a dictionary without taking reference so at the time of dict_unref it has become a leak Solution: To resolve the same call dict_new instead of get_new_dict updates bz#1650403 Change-Id: I3ccbbf5af07079a4fa09aad2cd0458c8625b2f06 Signed-off-by: Mohit Agrawal <moagrawal@redhat.com>
* cluster/afr: fix zerofill transaction.startXiubo Li2019-01-141-1/+1
| | | | | | | | This maybe one mistake when coding. Fixes: bz#1665332 Change-Id: Ia8f8dadf4a71579240ff9950b141ca528bd342b3 Signed-off-by: Xiubo Li <xiubli@redhat.com>
generated by cgit (git 2.34.1) at 2024-04-19 14:52:12 +0000