summaryrefslogtreecommitdiffstats
path: root/xlators
Commit message (Collapse)AuthorAgeFilesLines
* tier : Tier as a servicehari gowtham2017-01-1633-138/+3227
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | tierd is implemented by separating from rebalance process. The commands affected: 1) Attach tier will trigger this process instead of old one 2) tier start and tier start force will also trigger this process. 3) volume status [tier] will show tier daemon as a process instead of task and normal tier status and tier detach status works. 4) tier stop implemented. 5) detach tier implemented separately along with new detach tier status 6) volume tier volname status will work using the changes. 7) volume set works This patch has separated the tier translator from the legacy DHT rebalance code. It now sends the RPCs from the CLI to glusterd separate to the DHT rebalance code. The daemon is now a service, similar to the snapshot daemon, and can be viewed using the volume status command. The code for the validation and commit phase are the same as the earlier tier validation code in DHT rebalance. The “brickop” phase has been changed so that the status command can use this framework. The service management framework is now used. DHT rebalance does not use this framework. This service framework takes care of : *) spawning the daemon, killing it and other such processes. *) volume set options , which are written on the volfile. *) restart and reconfigure functions. Restart is to restart the daemon at two points 1)after gluster goes down and comes up. 2) to stop detach tier. *) reconfigure is used to make immediate volfile changes. By doing this, we don’t restart the daemon. it has the code to rewrite the volfile for topological changes too (which comes into place during add and remove brick). With this patch the log, pid, and volfile are separated and put into respective directories. Change-Id: I3681d0d66894714b55aa02ca2a30ac000362a399 BUG: 1313838 Signed-off-by: hari gowtham <hgowtham@redhat.com> Reviewed-on: http://review.gluster.org/13365 Smoke: Gluster Build System <jenkins@build.gluster.org> Tested-by: hari gowtham <hari.gowtham005@gmail.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd: remove extra space in error messageMichael Adam2017-01-161-2/+2
| | | | | | | | | | | | | BUG: 1402237 Change-Id: Ib6efca655555a92a0542ef6056f3357f390eeb38 Signed-off-by: Michael Adam <obnox@samba.org> Reviewed-on: http://review.gluster.org/16048 Tested-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* upcall: Resolve dict leak from up_(f)removexattr in upcall code pathMohit Agrawal2017-01-161-22/+14
| | | | | | | | | | | | | | | | | | | | | | Problem: In up_(f)removexattr() dict_for_key_value() is used to create a new dict. This dict is not correctly unref'd and gets leaked. Solution: To avoid the leak up_(f)removexattr() now also does a dict_unref() on the newly created dict. While reviewing the code in up_(f)setxattr() for a similar problem, it was noticed that there is an extra dict created. There is no need for this copy, upcall_local_init() can just take the dict that was passed as argument to the FOP. BUG: 1412917 Change-Id: I5bb9a7d99f5087af11c19ae722de62bdb5ad1498 Signed-off-by: Mohit Agrawal <moagrawa@redhat.com> Reviewed-on: http://review.gluster.org/16392 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org>
* afr: Avoid resetting event_gen when brick is always downRavishankar N2017-01-123-19/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: __afr_set_in_flight_sb_status(), which resets event_gen to zero, is called if failed_subvols[i] is non-zero for any brick. But failed_subvols[i] is true even if the brick was down *before* the transaction started. Hence say if 1 brick is down in a replica-3, every writev that comes will trigger an inode refresh because of this resetting, as seen from the no. of FSTATs in the profile info in the BZ. Fix: Reset event gen only if the brick was previously a valid read child and the FOP failed on it the first time. Also `s/afr_inode_read_subvol_reset/afr_inode_event_gen_reset` because the function only resets event gen and not the data/metadata readable. Change-Id: I603ae646cbde96995c35db77916e2ed80b602a91 BUG: 1409206 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/16309 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* fuse: fix memory leak in setxattrXavier Hernandez2017-01-121-27/+21
| | | | | | | | | | | | | | | | | | | If there's some failed check in setxattr of mount/fuse before actually starting the operation, a fuse_state_t structure is leaked. This fix correctly releases allocated resources in case of error. Change-Id: I8b1cda67a613c13b6bc38947352e2ccfccf96a1d BUG: 1412174 Signed-off-by: Xavier Hernandez <xhernandez@datalab.es> Reviewed-on: http://review.gluster.org/16380 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* glusterd: Add info on op-version for clients in vol status outputSamikshan Bairagya2017-01-124-1/+42
| | | | | | | | | | | | | | | | | | | | | Currently the `gluster volume status <VOLNAME|all> clients` command gives us the following information on clients: 1. Brick name 2. Client count for each brick 3. hostname:port for each client 4. Bytes read and written for each client There is no information regarding op-version for each client. This patch adds that to the output. Change-Id: Ib2ece93ab00c234162bb92b7c67a7d86f3350a8d BUG: 1409078 Signed-off-by: Samikshan Bairagya <samikshan@gmail.com> Reviewed-on: http://review.gluster.org/16303 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* Upcall: Fix possible memleak when inode_ctx_set failsSoumya Koduri2017-01-121-0/+1
| | | | | | | | | | | | | | | | In __upcall_inode_ctx_set(), if inode_ctx_set fails we should free allocated memory for ctx. This patch takes care of the same. Change-Id: Iafb42787151a579caf6f396c9b414ea48d16e6b4 BUG: 1412489 Reported-by: Nithya Balachandran <nbalacha@redhat.com> Signed-off-by: Soumya Koduri <skoduri@redhat.com> Reviewed-on: http://review.gluster.org/16381 Reviewed-by: N Balachandran <nbalacha@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* cluster/afr: Do not log of split-brain when there isn't oneKrutika Dhananjay2017-01-113-24/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | * Even on errors like ENOENT, AFR logs split-brain after read-txn refresh, introduced by commit a07ddd8f. This can be a cause of much panic and confusion and needs to be fixed. * Also fixed this issue in write-txns. * Fixed afr read txns to log about split-brain only after knowing that there is no split-brain choice configured. * Removed code duplication * Fixed incorrect passing of error code in afr_write_txn_refresh_done() (the function was passing -0 as errno to gf_msg(). Change-Id: I354f454ce5bf0e5f00bc27916eb597367cb7d927 BUG: 1411625 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/16362 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Ravishankar N <ravishankar@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* feature/dht: undo partially successful dir renameCsaba Henk2017-01-114-7/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As with dht, dirs are present on all subvolumes, renaming them is a compound operation and thus a partial success + partial failure scenario is possible, resulting in an inconsistent state. For purposes of reproduction, such a scenario can easily be produced by stopping the volume, edit the volfile of a certain subvolume to get at an "option read-only on" setting, and then restart the volume. Thus those operations that are to make change on the affected subvolume will fail with EROFS. To handle such scenarios, we introduce an in-memory cache where we record the return values obtained from the subvolumes. At the final stage of the dir rename operation we check if it's a partial success/fail situation. If yes, then we perform a reverse rename op on those subvolumes where the operation succeeded. Change-Id: I3d05f74f53932cb984a918d252a7309c1009a51d BUG: 1412069 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/15739 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: N Balachandran <nbalacha@redhat.com>
* dht : file rename operation is successful but log has error File existsMohit Agrawal2017-01-092-7/+20
| | | | | | | | | | | | | | | | | | | | Problem: file rename operation is successful but log has error 'key:trusted.glusterfs.dht.linkto error:File exists' Solution: The error comes in log only when file already has set this xattr (trusted.glusterfs.dht.linkto) before run rename operation and in that case sys_lsetxattr throws this kind of message. To avoid the error message in logs update the condition in posix_handle_pair. BUG: 1404905 Change-Id: Iafd8cb45f9d7f4fe247e297a6ef0af978a8d0b30 Signed-off-by: Mohit Agrawal <moagrawa@redhat.com> Reviewed-on: http://review.gluster.org/16185 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* readdir-ahead : Perform STACK_UNWIND outside of mutex locksPoornima G2017-01-091-48/+67
| | | | | | | | | | | | | | | | | | Currently STACK_UNWIND is performnd within ctx->lock. If readdir-ahead is loaded as a child of dht, then there can be scenarios where the function calling STACK_UNWIND becomes re-entrant. Its a good practice to not call STACK_WIND/UNWIND within local mutex's Change-Id: If4e869849d99ce233014a8aad7c4d5eef8dc2e98 BUG: 1401812 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/16068 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* dht: At places needed use STACK_WIND_COOKIEPoornima G2017-01-0910-654/+664
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Issue: frame has a void * cookie pointer. In case of STACK_WIND_COOKIE frame->cookie is assigned to what is sent by the caller. In case of STACK_WIND frame->cookie is assigned to point point to the frame itself. For ease of coding, at many places, the cookie in the cbk is used to get the pointer to the next xl. This is inconsistent when STACK_WIND_TAIL comes into picture. Eg: dht_setxattr () { for (i = 0 ; i < conf->subvolume_cnt ; i++) { STACK_WIND (..dht_checking_pathinfo_cbk, conf->subvolumes[i] ..); } dht_checking_pathinfo_cbk (...void *cookie...) { prev = cookie; ... for (i = 0; i < conf->subvolume_cnt; i++) { if (conf->subvolumes[i] == prev->this) { ... } } } Consider the below graph: dht (parent) readdir-ahead => Doesn't define setxattr and uses STACK_WIND_TAIL protocol-client With this graph, when dht_checking_pathinfo_cbk is called, cookie will have frame pointing to protocol-client. i.e. prev->this will be protocol-client. But dht was expecting it to be readdir-ahead as it has stored in conf->subvolumes[i] Solution: Hence, as a thumb rule, if cbk is using cookie, then we explicitly call STACK_WIND_COOKIE. Change-Id: I83aea1e24c809c5a91a0db7283e908e125471bd4 BUG: 1401812 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/16039 Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* cluster/ec: Fixing log messageSunil Kumar H G2017-01-081-5/+10
| | | | | | | | | | | | | | | Updating the warning message with details to improve user understanding. BUG: 1409202 Change-Id: I001f8d5c01c97fff1e4e1a3a84b62e17c025c520 Signed-off-by: Sunil Kumar H G <sheggodu@redhat.com> Reviewed-on: http://review.gluster.org/16315 Tested-by: Sunil Kumar Acharya Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Xavier Hernandez <xhernandez@datalab.es>
* glusterd: Get maximum supported op-version in a clusterSamikshan Bairagya2017-01-0810-29/+198
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | gluster volume get <VOLNAME> cluster.opversion gives us the current op-version on which the cluster is operating. There is no command that lets the user know the maximum supported op-version that the cluster can run on. This patch adds a new global option cluster.max-op-version, that can be used to retrieve the maximum supported op-version in a cluster. Usage: # gluster volume get all cluster.max-op-version Example output: Option Value ------ ----- cluster.max-op-version 30900 NOTE: The only way to test this feature for now is to set the GD_OP_VERSION_MAX macro to different values (30800 for 3.8,30900 for 3.9, and so on) and rebuild glusterd. Since the regression test framework currently doesn't have support to simulate these tests, there are no accompanying regression tests for this feature. It should be possible to add tests once glusto comes in and makes it easier to run a heterogeneous cluster. Change-Id: I547480ee5e7912664784643e436feb198b6d16d0 BUG: 1365822 Signed-off-by: Samikshan Bairagya <samikshan@gmail.com> Reviewed-on: http://review.gluster.org/16283 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* md-cache: Cache updated as a part of invalidate should not update timePoornima G2017-01-081-14/+25
| | | | | | | | | | | | | | | | | Currently when a invalidate happens we update the cache along with the cache time. The problem with this is, upcall doesn't update the last access time of a client when an invalidation is sent, thus resulting in a timewindow where the md-cache has cached, but the upcall is unaware and hence upcall will not further invalidate the cache(unless a fop is sent from the same client, and upcall updates its database to reflect the same) Change-Id: Ibceb8d2fc360582752846bbf7fd59697d5424754 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/16295 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* performance/write-behind: Add debug messagesRaghavendra G2017-01-081-17/+168
| | | | | | | | | | Change-Id: I2ea1350fcbe4b6c06dcb8093b28316f734cd3b48 BUG: 1379655 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/16285 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* cluster/dht: Incorrect migration checks in fsyncN Balachandran2017-01-081-5/+6
| | | | | | | | | | | | | | | | | Fixed the order of the migration phase checks in dht_fsync_cbk. Phase1 should never be hit if op_ret is non zero. Signed-off-by: N Balachandran <nbalacha@redhat.com> Change-Id: I9222692e04868bffa93498059440f0aa553c83ec BUG: 1410777 Reviewed-on: http://review.gluster.org/16350 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* features/uss: Remove redundant dict_unrefAnoop C S2017-01-061-1/+0
| | | | | | | | | | | | | In case dict_set_dynstr_with_alloc fails, dict_unref is done when exection jumps to label 'out'. Change-Id: I083386b7f85207348ba0bc353b5d1036ab821a15 Signed-off-by: Anoop C S <anoopcs@redhat.com> Reviewed-on: http://review.gluster.org/16321 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* posix: make sure atime and mtime are set when calling lutimes()Niels de Vos2017-01-061-6/+20
| | | | | | | | | | | | | | | | | | | | | When overwriting an existing file with O_TRUNC, the 'atime' was set to 0, meaning the Epoch (01-Jan-1970 UTC). However, the 'mtime' gets updated correcty. In case 'atime' or 'mtime' is not passed in the 'struct iatt', the time values passed to the systemcall are taken from the current values are returned by lstat(). Change-Id: I7021b7161dcd6c9a3e515d98f6d4847533c434b3 BUG: 1401777 Reported-by: Eivind Sarto <eivindsarto@gmail.com> Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/16034 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* dht/rebalance: remove errno check for failure detectionSusant Palai2017-01-061-16/+13
| | | | | | | | | | | BUG: 1410355 Change-Id: I867419ca36a81ef7209e6911a46c1c2c898b8eab Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: http://review.gluster.org/16328 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* glusterd: Fail add-brick on replica count change, if brick is downkarthik-us2017-01-061-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: 1. Have a replica 2 volume with bricks b1 and b2 2. Before setting the layout, b1 goes down 3. Set the layout write some data, which gets populated on b2 4. b2 goes down then b1 comes up 5. Add another brick b3, and heal will take place from b1 to b3, which basically have no data 6. Write some data. Both b1 and b3 will mark b2 for pending writes 7. b1 goes down, and b2 comes up 8. b2 gets heald from b1. During heal it removes the data which is already in b2, considering that as stale data. This leads to data loss. Solution: 1. In glusterd stage-op, while adding bricks, check whether the replica count is being increased 2. If yes, then check whether any of the bricks are down at that time 3. If yes, then fail the add-brick to avoid such data loss 4. Else continue the normal operation. This check will work enen when we convert plain distribute volume to replicate Test: 1. Create a replica 2 volume 2. Kill one brick from the volume 3. Try adding a brick to the volume 4. It should fail with all bricks are not up error 5. Cretae a distribute volume and kill one of the brick 6. Try to convert it to replicate volume, by adding bricks. 7. This should also fail. Change-Id: I9c8d2ab104263e4206814c94c19212ab914ed07c BUG: 1406411 Signed-off-by: karthik-us <ksubrahm@redhat.com> Reviewed-on: http://review.gluster.org/16330 Tested-by: Ravishankar N <ravishankar@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: N Balachandran <nbalacha@redhat.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* cluster/ec: Do lookup on an existing file in linkPranith Kumar K2017-01-053-17/+18
| | | | | | | | | | | | | | | | | | | Problem: In link fop lookup is happening on the new fop which doesn't exist so the iatt ec serves parent xlators has size as zero which leads to 'cat' giving empty output Fix: Change code so that lookup happens on the existing link instead. BUG: 1409730 Change-Id: I70eb02fe0633e61d1d110575589cc2dbe5235d76 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/16320 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Xavier Hernandez <xhernandez@datalab.es> Tested-by: Xavier Hernandez <xhernandez@datalab.es> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* ec: Invalidations in disperse volume should not update the statPoornima G2017-01-053-4/+16
| | | | | | | | | | | | | | | | | | | | | | Issue: In disperse volume, the file is present across bricks, hence the stat from one brick doesn't carry the valid size of the file. Therefore the upcall from one brick updating the md-cache results in wrong size being updated. Fix: If the notification is cache invalidation then, indicate md-cache that the attributes is invalid. BUG: 1410375 Change-Id: Id89d2283478e70b62b435a8891fffc86d2be8cb2 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/16329 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Xavier Hernandez <xhernandez@datalab.es> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* readdir-ahead: Enhance EOD detection logicPoornima G2017-01-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Issue: Currently end of directory is identified on obtaining a readdirp_cbk with op_ret = 0 (i.e. 0 entries fetched in readdirp). Thus an extra readdirp is required for every directory just to identify EOD. Consider a case of listing large number of small directories. The readdirp fops required are doubled in that case. Solution: On reaching the EOD, posix sets the op_errno to ENOENT, hence along with looking for 'op_ret == 0' we also look for 'operrno == ENOENT' ehile checking for EOD condition Change-Id: I7a5b52e7b98f5dc236c387635fcc651dac0171b3 BUG: 1401812 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/16042 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* cluster/dht: Do rename cleanup as rootPranith Kumar K2017-01-051-0/+1
| | | | | | | | | | | | | | | | | | | | | | Problem: Rename linkfile cleanup is done as non-root which may not have priviliges to do the rename so it fails with EACCESS. MKDIR on that name in future will start to hole on this subvolume. It is not easy to hit on fuse mounts because vfs takes care of the permission checks even before rename fop is wound. But with nfs-ganesha mounts it happens. Fix: Do rename cleanup as root BUG: 1409727 Change-Id: I414c1eb6dce76b4516a6c940557b249e6c3f22f4 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/16317 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-by: N Balachandran <nbalacha@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* mount/fuse: Fix the place where graph-switch event is loggedKrutika Dhananjay2017-01-041-3/+4
| | | | | | | | | | Change-Id: I3c8577b87db02a2a6ce6159e7d04cf58a2bda0c1 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/16302 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* storage/posix: log the error when locking the export directory failsRaghavendra Bhat2017-01-031-2/+6
| | | | | | | | | | | | | | | | | | posix xlator tries to prevent external unmount of the brick export directory by locking it. It locks the export directory by opening it (i.e. doing a opendir). But if opendir fails it errors out resulting in the brick process going down. The error due to which opendir failed is not logged. Change-Id: I28648382b7f0b88fb1aeb36152e5ab5d812374c9 BUG: 1401095 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/16018 Smoke: Gluster Build System <jenkins@build.gluster.org> Tested-by: Vijay Bellur <vbellur@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/dht: Fix dict_leak in migration check tasksN Balachandran2017-01-021-0/+7
| | | | | | | | | | | | | | | | Fixed a memleak where dict was not being unrefed in the dht_migration_complete_check_task and dht_rebalance_inprogress_task functions. Change-Id: I3d42e9a2e5c8596c985bf6431a68fd3905227383 BUG: 1409186 Signed-off-by: N Balachandran <nbalacha@redhat.com> Reviewed-on: http://review.gluster.org/16308 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: MOHIT AGRAWAL <moagrawa@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* glusterd, cli: Get global options through volume get functionalitySamikshan Bairagya2016-12-305-29/+201
| | | | | | | | | | | | | | | | | | | | | | | | | | Currently it is not possible to retrieve values of global options by using the 'gluster volume get' functionality if there are no volumes present. In order to get the global options one has to use 'gluster volume get' with a specific volume name. This usage makes the illusion as though the option is set only on one volume, which is incorrect. When setting the global options, 'gluster volume set' provides a way to set them using the volume name as 'all'. Similarly, retrieving the global options should be made possible by using the volume name 'all' with the 'gluster volume get' functionality. This patch adds that functionality to 'volume get' Usage: # gluster volume get all <OPTION/all> Change-Id: Ic2fdb9eda69d4806d432dae26d117d9660fe6d4e BUG: 1378842 Signed-off-by: Samikshan Bairagya <samikshan@gmail.com> Reviewed-on: http://review.gluster.org/15563 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* performance/readdir-ahead: mark two options as NO_DOCRaghavendra G2016-12-271-2/+2
| | | | | | | | | | | | | | | The two options are rda-high-wmark and rda-low-wmark. The impact of these two options is yet to be fully understood and hence not advertising these options to not run into surprises. Change-Id: Ia537f4cc342011f0f2f3849ad6b938e247e5622d BUG: 1356960 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/16297 Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* cluster/afr: Fix missing name indices due to EEXIST errorKrutika Dhananjay2016-12-271-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PROBLEM: Consider a volume with granular-entry-heal and sharding enabled. When a replica is down and a shard is created as part of a write, the name index is correctly created under indices/entry-changes/<dot-shard-gfid>. Now when a read on the same region triggers another MKNOD, the fop fails on the online bricks with EEXIST. By virtue of this being a symmetric error, the failed_subvols[] array is reset to all zeroes. Because of this, before post-op, the GF_XATTROP_ENTRY_OUT_KEY will be set, causing the name index, which was created in the previous MKNOD operation, to be wrongly deleted in THIS MKNOD operation. FIX: The ideal fix would have been for a transaction to delete the name index ONLY if it knows it is the one that created the index in the first place. This would involve gathering information as to whether THIS xattrop created the index from individual bricks, aggregating their responses and based on the various posisble combinations of responses, decide whether to delete the index or not. This is rather complex. Simpler fix would be for post-op to examine local->op_ret in the event of no failed_subvols to figure out whether to delete the name index or not. This can occasionally lead to creation of stale name indices but they won't be affecting the IO path or mess with pending changelogs in any way and self-heal in its crawl of "entry-changes" directory would take care to delete such indices. Change-Id: Ic1b5257f4dc9c20cb740a866b9598cf785a1affa BUG: 1408712 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/16286 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* afr: use accused matrix instead of readable matrix for deciding healsRavishankar N2016-12-261-1/+1
| | | | | | | | | | | | | | | | | | | | | | | Problem: afr_replies_interpret() used the 'readable' matrix to trigger client side heals after inode refresh. But for arbiter, readable is always zero. So when `dd` is run with a data brick down, spurious data heals are are triggered. These heals open an fd, causing eager lock to be disabled (open fd count >1) in afr transactions, leading to extra FXATTROPS Fix: Use the accused matrix (derived from interpreting the afr pending xattrs) to decide whether we can start heal or not. Change-Id: Ibbd56c9aed6026de6ec42422e60293702aaf55f9 BUG: 1408395 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/16277 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* glusterd/geo-rep: Fix geo-rep config issueKotresh HR2016-12-261-14/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | Problem: Geo-replication config commands fail when geo-rep status is in 'Created'. Cause: During staging phase of geo-rep config, it checks for the existence of 'monitor.pid' file. But the pid file gets created only on start of geo-rep. Hence it fails. Fix: Do not check for the existence of pid-file during staging for config commands. It is not required. Change-Id: I626d368b249cf0423c7f49b4284465508371f566 BUG: 1404678 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/16132 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Aravinda VK <avishwan@redhat.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* dht/rebalance: reverify lookup failuresSusant Palai2016-12-222-58/+130
| | | | | | | | | | | | | | | | | | race: readdirp has read one entry, and doing a lookup on that entry, but user might have renamed/removed that entry just after readdirp but before lookup. Since remove-brick is a costly opertaion,will ingore any ENOENT/ESTALE failures and move on. Change-Id: I62c7fa93c0b9b7e764065ad1574b97acf51b5996 BUG: 1408115 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: http://review.gluster.org/15846 Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* performance/readdir-ahead: limit cache sizeRaghavendra G2016-12-223-36/+111
| | | | | | | | | | | | | | | | This patch introduces a new option called "rda-cache-limit", which is the maximum value the entire readdir-ahead cache can grow into. Since, readdir-ahead holds a reference to inode through dentries, this patch also accounts memory stored by various xlators in inode contexts. Change-Id: I84cc0ca812f35e0f9041f8cc71effae53a9e7f99 BUG: 1356960 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/16137 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Poornima G <pgurusid@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* afr: Ignore event_generation checks post inode refresh for write txnsRavishankar N2016-12-223-1/+4
| | | | | | | | | | | | | | | | | | | Before http://review.gluster.org/#/c/15673/, after inode refresh, we failed read txns in case of EIO or event_generation being zero. For write transactions, the check was only for EIO. 15673 re-factored the code to fail both read and write when event_generation=0. This seems to have caused a regression as explained in the BZ. This patch restores that behaviour in afr_txn_refresh_done(). Change-Id: Ib8e116506badce6f58b55827dbe403d95069d744 BUG: 1406224 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/16205 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* Fixes GlusterFS process crashes on deep directory hierarchySanoj Unnikrishnan2016-12-212-65/+87
| | | | | | | | | | | | | | | | alloca() calls to recusive function posix_make_ancestryfromgfid consumes the entire stack leading to segfault. Changed the function to iterative and reused the same linkname buffer across iterations. Change-Id: If065c8b9f7f85219bdd2d23259a115fe66f5f60d BUG: 1405775 Signed-off-by: Sanoj Unnikrishnan <sunnikri@redhat.com> Reviewed-on: http://review.gluster.org/16192 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* storage/posix: Do not create a directory which already existAshish Pandey2016-12-211-1/+8
| | | | | | | | | | | | | | | | | | | | | Problem: While brick process starts, it tries to create trashcan and internal_op directory with fixed gfids. For the first time these directories will not be present. However, stop and start of volume again tries to create these directories, which are already present. This throws a gfid exist warning and EEXIST error in logs. Solution: Check if the directory exist on brick and gfid of this dir and the requested gfid matches or not. Change-Id: Ie4966a550ed44046e0f2d10e9dbd540182ea97d2 BUG: 1406348 Signed-off-by: Ashish Pandey <aspandey@redhat.com> Reviewed-on: http://review.gluster.org/16212 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* socket: socket disconnect should wait for poller thread exitRajesh Joseph2016-12-214-7/+10
| | | | | | | | | | | | | | | | | | | | | When SSL is enabled or if "transport.socket.own-thread" option is set then socket_poller is run as different thread. Currently during disconnect or PARENT_DOWN scenario we don't wait for this thread to terminate. PARENT_DOWN will disconnect the socket layer and cleanup resources used by socket_poller. Therefore before disconnect we should wait for poller thread to exit. Change-Id: I71f984b47d260ffd979102f180a99a0bed29f0d6 BUG: 1404181 Signed-off-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-on: http://review.gluster.org/16141 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kaushal M <kaushal@redhat.com> Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* client,server: Free xdr-allocated compound req/rsp arraysKrutika Dhananjay2016-12-202-1/+2
| | | | | | | | | | | Change-Id: I9e1829f4f73f001bba33005032e030f289e8d003 BUG: 1406252 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/16210 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* snapshot: Fix restore rollback to reassign snap volume ids to bricksAvra Sengupta2016-12-166-1/+158
| | | | | | | | | | | | | | | | | | | | Added further checks to ensure we do not go beyond prevalidate when trying to restore a snapshot which has a nfs-gansha conf file, in a cluster when nfs-ganesha is not enabled The error message for the particular scenario is: "Snapshot(<snapname>) has a nfs-ganesha export conf file. cluster.enable-shared-storage and nfs-ganesha should be enabled before restoring this snapshot." Change-Id: I1b87e9907e0a5e162f26ef1ca89fe76e8da8610f BUG: 1404118 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/16116 Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* protocol/client: Fix potential mem-leaksKrutika Dhananjay2016-12-162-4/+1
| | | | | | | | | | | | | | | Commit 93eaeb9c93be3232f24e840044d560f9f0e66f71 introduces leaks in INODELK callback where a dict is unserialized twice, leading to dict leaks. Change-Id: I219ccb2279f237ebc2e4fc366af4775a461929b8 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/16156 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* access_control : address O_TRUNC and O_APPEND flag properly in posix_acl_openJiffin Tony Thottan2016-12-141-2/+3
| | | | | | | | | | | | | | | | | In posix_acl_open, in switch value passed is (flag & O_ACCMODE). The value for O_ACCMODE is 0003, so the result will always be less than or equal to 3. But value for O_TRUNC is 01000 and O_APPEND is 02000, so it is not right to check it in switch case Change-Id: Ia17db80a6a5f681c35e08e062d384f33ef7e0354 BUG: 1387241 Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> Reviewed-on: http://review.gluster.org/15688 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* cluster/ec: Fix lk-owner set race in ec_unlockPranith Kumar K2016-12-136-34/+42
| | | | | | | | | | | | | | | | | | | | | | Problem: Rename does two locks. There is a case where when it tries to unlock it sends xattrop of the directory with new version, callback of these two xattrops can be picked up by two separate epoll threads. Both of them will try to set the lk-owner for unlock in parallel on the same frame so one of these unlocks will fail because the lk-owner doesn't match. Fix: Specify the lk-owner which will be set on inodelk frame which will not be over written by any other thread/operation. BUG: 1402710 Change-Id: I666ffc931440dc5253d72df666efe0ef1d73f99a Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/16074 Reviewed-by: Xavier Hernandez <xhernandez@datalab.es> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* upcall: Fix 'use after free' in a log messageSoumya Koduri2016-12-131-3/+5
| | | | | | | | | | | | | | | There is chance of accessing freed pointer in a log message at TRACE level while cleaning up expired client entries. Change-Id: I06b4dad755df63978ab04ca52442bfd4600d139a BUG: 1404168 Reported-by: Ravishankar N <ravishankar@redhat.com> Signed-off-by: Soumya Koduri <skoduri@redhat.com> Reviewed-on: http://review.gluster.org/16117 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org>
* glusterd: Handle volinfo->refcnt properly during volume start commandAvra Sengupta2016-12-121-10/+10
| | | | | | | | | | | | | | | | | | While running the volume start command, the refcnt of the volume is incremented. At the end of the command, the refcnt should also be decremented. This is currently not the case. This patch, makes sure the refcnt is also decremented at the end of the volume start command. Change-Id: I017b5039be5948df41dde6bc89d2955d5d18971f BUG: 1403780 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/16108 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* cluster/afr: Fix per-txn optimistic changelog initialisationKrutika Dhananjay2016-12-122-29/+69
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Incorrect initialisation of local->optimistic_change_log was leading to skipped pre-op and post-op even when a brick didn't participate in the txn because it was down. The result - missing granular name index resulting in some entries never getting healed. FIX: Initialise local->optimistic_change_log just before pre-op. Also fixed granular entry heal to create the granular name index in pre-op as opposed to post-op. This is to prevent loss of granular information when during an entry txn, the good (src) brick goes offline before the post-op is done. This would cause self-heal to do conservative merge (since dirty xattr is the only information available), which when granular-entry-heal is enabled, expects granular indices, the lack of which can lead to loss of data in the worst case. Change-Id: Ia3ad716d6fb1821555f02180e86e8711a79f958d BUG: 1402730 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/16075 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* performance/write-behind: Add more fops for checking dependency withRaghavendra G2016-12-121-0/+317
| | | | | | | | | | | | | | | | | | cached writes Fops like readdirp, link, fallocate, discard, zerofill return iatt of files in their responses. This iatt can be cached by md-cache. Hence it is important that write-behind maintains relative ordering of these fops with cached writes. Failure to do so, can result in md-cache storing stale iatts and returning the same to applications. Change-Id: Icfe12ad807e42fe9e52a9f63e47ce63f511c6946 BUG: 1390050 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/15757 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* snapshot/ganesha: Copy export.conf, only if ganesha.enable is on.Avra Sengupta2016-12-121-13/+25
| | | | | | | | | | | | | | | | Status of the volume being exported via nfs ganesha, should be checked by checking if ganesha.enable is set or not, rather than deciding based on the errno of the stat Change-Id: Iaff786d9f77a2de1322ce8ccb4b80954f84d3373 BUG: 1402828 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/16094 CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: jiffin tony Thottan <jthottan@redhat.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* refcount: return pointer to the structure instead of a counterNiels de Vos2016-12-111-4/+6
| | | | | | | | | | | | | | | | There are no real users of the counter. It was thought of a handy tool to track and debug refcounting, but it is not used at all. Some parts of the code would benefit from a pointer getting returned instead. BUG: 1399780 Change-Id: I97e52c48420fed61be942ea27ff4849b803eed12 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/15971 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Xavier Hernandez <xhernandez@datalab.es> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
generated by cgit (git 2.34.1) at 2024-05-21 14:24:24 +0000