summaryrefslogtreecommitdiffstats
path: root/xlators
Commit message (Collapse)AuthorAgeFilesLines
...
* cluster/tier: fixes for migration over ec as cold tierDan Lambright2016-04-271-1/+1
| | | | | | | | | | | | | | | | Backport of http://review.gluster.org/11433 The above mentioned patch was backported but it was not complete. This patch backports whatever was left out. For more info, refer to previous backport at http://review.gluster.org/#/c/11652. Change-Id: I6ccda8ca8e43485b9b354341bbfcb302496f632c BUG: 1330765 Signed-off-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-on: http://review.gluster.org/14084 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* afr: replica pair going offline does not require CHILD_MODIFIED eventSakshi Bansal2016-04-272-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | As a part of CHILD_MODIFIED event DHT forgets the current layout and performs fresh lookup. However this is not required when a replica pair goes offline as the xattrs can be read from other replica pairs. Hence setting different event to handle replica pair going down. > Backport of http://review.gluster.org/#/c/12573/ > Change-Id: I5ede2a6398e63f34f89f9d3c9bc30598974402e3 > BUG: 1281230 > Signed-off-by: Sakshi Bansal <sabansal@redhat.com> > Reviewed-on: http://review.gluster.org/12573 > Reviewed-by: Ravishankar N <ravishankar@redhat.com> > Reviewed-by: Susant Palai <spalai@redhat.com> > Tested-by: NetBSD Build System <jenkins@build.gluster.org> > Tested-by: Gluster Build System <jenkins@build.gluster.com> > Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Change-Id: Ida30240d1ad8b8730af7ab50b129dfb05264fdf9 BUG: 1283972 Signed-off-by: Sakshi Bansal <sabansal@redhat.com> Reviewed-on: http://review.gluster.org/12767 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* glusterd: fix validation of lower op-version check in volume setAtin Mukherjee2016-04-261-2/+2
| | | | | | | | | | | | | | | | | Commit 2d87a98 introduced a validation to fail lowering down the cluster.op-version. Commit 2eb8758 actually changed the variable value from cluster's op-version to volume's op-version which resulted the logic go for a toss. Change-Id: I70df32b75c3a3fe47dc840c4a655059e5b124bca BUG: 1330545 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/14069 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/14077
* quota: setting 'read-only' option in xdata to instruct DHT to not healSakshi Bansal2016-04-262-2/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When quota is enabled the quota enforcer tries to get the size of the source directory by sending nameless lookup to quotad. But if the rename is successful even on one subvol or the source layout has anomalies then this nameless lookup in quotad tries to heal the directory which requires a lock on as many subvols as it can. But src is already locked as part of rename. For rename to proceed in brick it needs to complete a cluster-wide lookup. But cluster-wide lookup in quotad is blocked on locks held by rename, hence a deadlock. To avoid this quota sends an option in xdata which instructs DHT not to heal. Backport of http://review.gluster.org/#/c/13988/ > Change-Id: I792f9322331def0b1f4e16e88deef55d0c9f17f0 > BUG: 1252244 > Signed-off-by: Sakshi Bansal <sabansal@redhat.com> > Reviewed-on: http://review.gluster.org/13988 > Smoke: Gluster Build System <jenkins@build.gluster.com> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > CentOS-regression: Gluster Build System <jenkins@build.gluster.com> > Tested-by: Gluster Build System <jenkins@build.gluster.com> > Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Change-Id: I792f9322331def0b1f4e16e88deef55d0c9f17f0 BUG: 1328473 Signed-off-by: Sakshi Bansal <sabansal@redhat.com> Reviewed-on: http://review.gluster.org/14031 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com>
* dht/rebalance: Handle GF_DEFRAG_STOPSusant Palai2016-04-261-0/+17
| | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/14004 Problem: On a rebal stop, the migrator threads don't intimate the crawler thread to wake up in case it is waiting on signal from migrator thread. BUG: 1330529 Change-Id: I9019a715c7b4673b8bb5a75d7d33a18add85ce33 Reviewed-by: N Balachandran <nbalacha@redhat.com> Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: http://review.gluster.org/14076 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com>
* clone/snapshot: Save restored_from_snap for clonesAvra Sengupta2016-04-261-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Bricks of cloned volumes are lvm bricks mounted in /run/gluster, which on reboot of the node gets cleared. Hence, these brick paths need to be recreated on glusterd restart and the appropriate lvms are mounted. Backport of: > Change-Id: I6da086288c0dbdcedf3a20fd53f25e3728bea473 > BUG: 1328010 > Signed-off-by: Avra Sengupta <asengupt@redhat.com> > Reviewed-on: http://review.gluster.org/14021 > Smoke: Gluster Build System <jenkins@build.gluster.com> > CentOS-regression: Gluster Build System <jenkins@build.gluster.com> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Change-Id: I02d10e6bca99f6d78b50cb91c677e33a8dcefa17 BUG: 1329989 Signed-off-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-on: http://review.gluster.org/14059 Reviewed-by: mohammed rafi kc <rkavunga@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Avra Sengupta <asengupt@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* snapshot/quota: Copy quota.cksum during snapshot operationsAvra Sengupta2016-04-264-21/+40
| | | | | | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/#/c/13760/ A volume having a quota.conf file, should always have a quota.cksum file too. Based on this above assumption modifying glusterd_copy_quota_files() to always copy quota.cksum, if quota.conf is present. This change will be reflected when a snapshot is created, restored and cloned. Change-Id: Ia49dc26eacef32eeb8f7d7d9553c80e304b08779 BUG: 1329492 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/13760 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Vijaikumar Mallikarjuna <vmallika@redhat.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> (cherry picked from commit 8f3ad1e3ede77fa5f8c8d606e18a7e83865a822c) Reviewed-on: http://review.gluster.org/14047
* geo-rep: Fix hostname mismatch between volinfo and geo-rep statusAravinda VK2016-04-261-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | When Volume was created using IP, Gluster Volume info shows IP address But Geo-rep shows hostname if available, So difficult to map the outputs of Volume Info and Georep status output. Schedule Geo-rep script(c#13279) will merge the output of Volume info and Geo-rep status to get offline brick nodes information. This script was failing since host info shown in Volinfo is different from Georep status. Script was showing all nodes as offline. With this patch Geo-rep gets host info from volinfo->bricks instead of getting from hostname. Geo-rep status will now show same hostname/IP which was used in Volume Create. BUG: 1328706 Change-Id: Ib8e56da29129aa19225504a891f9b870f269ab75 Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/14005 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Saravanakumar Arumugam <sarumuga@redhat.com> Reviewed-by: Kotresh HR <khiremat@redhat.com> (cherry picked from commit bc89311aff62c78102ab6920077b6782ee99689a) Reviewed-on: http://review.gluster.org/14036
* dht: add "nuke" functionality for efficient server-side deletionJeff Darcy2016-04-263-14/+65
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a backport of the following two patches (of which the second is a trivial adjustment to a timeout for a test added by the first). http://review.gluster.org/13878 http://review.gluster.org/13935 This turns a special xattr into an rmdir with flags set. When that hits the posix translator on the server side, that causes the file/directory to be moved into the special "landfill" directory. From there, the posix janitor thread will take care of deleting it entirely on the server side - traversing it recursively if necessary. A couple of secondary issues were fixed to make this effective. * FUSE now ensures that setxattr values are NUL terminated. * The janitor thread now gets woken up immediately when something is placed in 'landfill' instead of only when file descriptors need to be closed. * The default landfill-emptying interval was reduced to 10s. To use the feature, issue a setxattr something like this: setfattr -n glusterfs.dht.nuke -v "" /mnt/glusterfs/vol/some_dir The value doesn't actually matter; the mere receipt of a request with this key is sufficient. Some day it might be useful to allow setting a required value as a sort of password, so that only those who know it can access the underlying special functionality. Change-Id: I4132a30d1faa53a6682399ad1d9041e2c4519951 BUG: 1330241 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/14065 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: N Balachandran <nbalacha@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* glusterd: SSL certificate depth volume option is incorrectKaleb S KEITHLEY2016-04-261-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | Between 3.7.1 and 3.7.2 a typo was introduced changing the string ssl-cert-depth to ssl-cetificate-depth. [sic] rpc/rpc-transport/socket/src/socket.c still expects the string ssl-cert-depth. Also replace a couple errant tabs with spaces. See: > Change-Id: I0621258470bd831c97008b56123a9dc7029d73f1 > BUG: 1330248 > http://review.gluster.org/#/c/14066/ Change-Id: I4d227fc40d9377dd1a1ef39bf31be026ba43acb1 BUG: 1330249 Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/14067 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* quota : fix null dereference issues in quotaManikandan Selvaganesh2016-04-251-1/+2
| | | | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/#/c/14022/ > Change-Id: I3805b206077718da26adbeb8b29a53642e00886f > BUG: 1328696 > Signed-off-by: Manikandan Selvaganesh <mselvaga@redhat.com> > Reviewed-on: http://review.gluster.org/14022 > Smoke: Gluster Build System <jenkins@build.gluster.com> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > CentOS-regression: Gluster Build System <jenkins@build.gluster.com> > Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Change-Id: Ia5af10b79a71c6be5db293aee070049364b70237 BUG: 1329115 Signed-off-by: Manikandan Selvaganesh <mselvaga@redhat.com> Reviewed-on: http://review.gluster.org/14041 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijaikumar Mallikarjuna <vmallika@redhat.com>
* cluster/afr: Fix inode-leak in data self-healPranith Kumar K2016-04-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Thanks to Olia-Kremmyda for finding the bug on github review, https://github.com/gluster/glusterfs/commit/b8106d1127f034ffa88b5dd322c23a10e023b9b6 >Change-Id: Ib8640ed0c331a635971d5d12052f0959c24f76a2 >BUG: 1329773 >Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> >Reviewed-on: http://review.gluster.org/14052 >Smoke: Gluster Build System <jenkins@build.gluster.com> >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> >CentOS-regression: Gluster Build System <jenkins@build.gluster.com> >Reviewed-by: Ravishankar N <ravishankar@redhat.com> >Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> BUG: 1329779 Change-Id: I3d77f0b445fdedf2c582ea88f8d89e1da525638f Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/14053 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com>
* cluster/distribute: detect stale layouts in entry fopsRaghavendra G2016-04-257-41/+759
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | dht_mkdir () { first-hashed-subvol = hashed-subvol for "bname" in in-memory layout of "parent"; inodelk (SETLKW, parent, "LAYOUT_HEAL_DOMAIN", "can be any subvol, but we choose first-hashed-subvol randomly"); { begin: hashed-subvol = hashed-subvol for "bname" in in-memory layout of "parent"; hash-range = extract hashe-range from layout of "parent"; ret = mkdir (parent/bname, hashed-subvol, hash-range); if (ret == "hash-value doesn't fall into layout stored on the brick (this error is returned by posix-mkdir)") { refresh_parent_layout (); goto begin; } } inodelk (UNLCK, parent, "LAYOUT_HEAL_DOMAIN", "first-hashed-subvol"); proceed with other parts of dht_mkdir; } posix_mkdir (parent/bname, client-hash-range) { disk-hash-range = getxattr (parent, "dht-layout-key"); if (disk-hash-range != client-hash-range) { fail-with-error ("hash-value doesn't fall into layout stored on the brick"); return 0; } continue-with-posix-mkdir; } Similar changes need to be done for dentry operations like create, symlink, link, unlink, rmdir, rename. These will be addressed in subsequent patches. This patch addresses only mkdir codepath. This change breaks stripe tests, as on some striped subvols dht layout xattrs are not set for some reason. This results in failure of mkdir. Since striped volumes are always created with dht, some tests associated with stripe also fail. So, I am making following tests changes (since stripe is out of maintainance): * modify ./tests/basic/rpc-coverage.t to not to use striped volumes * mark all (2) tests in tests/bugs/stripe/ as bad tests Change-Id: Idd1ae879f24a48303dc743c1bb4d91f89a629e25 BUG: 1329062 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/14040 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* mount/fuse: report ESTALE as ENOENTRaghavendra G2016-04-201-0/+3
| | | | | | | | | | | | | | | | | | | | | When the inode/gfid is missing, brick report back as an ESTALE error. However, most of the applications don't accept ESTALE as an error for a file-system object missing, changing their behaviour. For eg., rm -rf ignores ENOENT errors during unlink of files/directories. But with ESTALE error it doesn't send rmdir on a directory if unlink had failed with ESTALE for any of the files or directories within it. BUG: 1257894 Change-Id: I5e56bc0c53f52179940b4691acf6b3db853965df Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/14027 Tested-by: N Balachandran <nbalacha@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: N Balachandran <nbalacha@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* cluster/afr: Fix spurious entries in heal infoPranith Kumar K2016-04-205-17/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: Locking schemes in afr-v1 were locking the directory/file completely during self-heal. Newer schemes of locking don't require Full directory, file locking. But afr-v2 still has compatibility code to work-well with older clients, where in entry-self-heal it takes a lock on a special 256 character name which can't be created on the fs. Similarly for data self-heal there used to be a lock on (LLONG_MAX-2, 1). Old locking scheme requires heal info to take sh-domain locks before examining heal-state. If it doesn't take sh-domain locks, then there is a possibility of heal-info hanging till self-heal completes because of compatibility locks. But the problem with heal-info taking sh-domain locks is that if two heal-info or shd, heal-info try to inspect heal state in parallel using trylocks on sh-domain, there is a possibility that both of them assuming a heal is in progress. This was leading to spurious entries being shown in heal-info. Fix: As long as there is afr-v1 way of locking, we can't fix this problem with simple solutions. If we know that the cluster is running newer versions of locking schemes, in those cases we can give accurate information in heal-info. So introduce a new option called 'locking-scheme' which if it is 'granular' will give correct information in heal-info. Not only that, Extra network hops for taking compatibility locks, sh-domain locks in heal info will not be necessary anymore. Thus it improves performance. >BUG: 1322850 >Change-Id: Ia563c5f096b5922009ff0ec1c42d969d55d827a3 >Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> >Reviewed-on: http://review.gluster.org/13873 >Smoke: Gluster Build System <jenkins@build.gluster.com> >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> >CentOS-regression: Gluster Build System <jenkins@build.gluster.com> >Reviewed-by: Ashish Pandey <aspandey@redhat.com> >Reviewed-by: Anuradha Talur <atalur@redhat.com> >Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> >(cherry picked from commit b6a0780d86e7c6afe7ae0d9a87e6fe5c62b4d792) Change-Id: If7eee18843b48bbeff4c1355c102aa572b2c155a BUG: 1294675 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/14039 Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* Build fix: remove undefined -I${rpclibdir}Emmanuel Dreyfus2016-04-181-1/+1
| | | | | | | | | | | | | | | The variable is not defined anywhere, remove it. Backport of Iaefb349cceb4108ac22c44cd32e5ea3d3c8bc0e5 Change-Id: I2ef75c8da8c7421328958f91dfaaf287347296e4 Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> BUG: 1212676 Reviewed-on: http://review.gluster.org/13868 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* NFS: new option nfs.rdirplus addedSakshi Bansal2016-04-185-1/+37
| | | | | | | | | | | | | | | | | | | | When this option is 'disabled', NFS falls back to standard readdir instead of readdirp Backport of http://review.gluster.org/#/c/13782/ > Change-Id: Icaaf4da6533bee56160d4a81e42bb60f7d341945 > BUG: 1302948 > Signed-off-by: Sakshi Bansal <sabansal@redhat.com> Change-Id: Icaaf4da6533bee56160d4a81e42bb60f7d341945 BUG: 1312721 Signed-off-by: Sakshi Bansal <sabansal@redhat.com> Reviewed-on: http://review.gluster.org/13916 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* glusterd: populate brickinfo->real_path conditionallyAtin Mukherjee2016-04-1811-44/+76
| | | | | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/13965 glusterd_brickinfo_new_from_brick () is called from multiple places and one of them is glusterd_brick_rpc_notify where its very well possible that an underlying brick's file system has crashed and a disconnect event has been received. In this case glusterd tries to build the brickinfo from the brickid in the RPC request, however the same fails as glusterd_brickinfo_new_from_brick () fails from realpath. Fix is to skip populating real_path if its a disconnect event. Change-Id: I9d9149c64a9cf2247abb731f219c1b1eef037960 BUG: 1326174 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/13965 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/13973
* cluster/afr: Use parallel dir scan functionalityPranith Kumar K2016-04-175-13/+70
| | | | | | | | | | | | | | | | | | | | >BUG: 1221737 >Change-Id: I0ed71a72f0e33bd733723e00a01cf28378c5534e >Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> >Reviewed-on: http://review.gluster.org/13755 >Reviewed-on: http://review.gluster.org/13992 >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> >CentOS-regression: Gluster Build System <jenkins@build.gluster.com> >Smoke: Gluster Build System <jenkins@build.gluster.com> >Reviewed-by: Jeff Darcy <jdarcy@redhat.com> BUG: 1325857 Change-Id: I7c6b2ea065edd7f5dafffeb42fd6c601b4ab8d14 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/14010 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* cluster/afr: Don't lookup/forget inodesPranith Kumar K2016-04-175-43/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: All inodes that are looked-up are always forgotten without fail in afr removing the benefits of them being in lru. This same code can cause crashes if between inode_lookup, inode_forget in afr if the top xlator does inode_forget(0). Fix: Don't use lookup/forget in afr. No benefits are there at the moment for keeping this code. It is impossible to prevent top xlators to do inode_forget(0). Found similar instances in ec and removed them even though those code paths are not going to be executed in any place other than heal-daemon. >BUG: 1321554 >Change-Id: Ia4cb236178f7f129cc898d53f0bbd26f494a2a8d >Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> >Reviewed-on: http://review.gluster.org/13834 >Smoke: Gluster Build System <jenkins@build.gluster.com> >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> >CentOS-regression: Gluster Build System <jenkins@build.gluster.com> >Reviewed-by: Anuradha Talur <atalur@redhat.com> BUG: 1327864 Change-Id: I3507ed88cd75e069ed302525bfa259cf407871fb Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/14009 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* cluster/afr: Fix partial heals in 3-way replicationPranith Kumar K2016-04-165-15/+138
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: When there are 2 sources and one sink and if two self-heal daemons try to acquire locks at the same time, there is a chance that it gets a lock on one source and sink leading partial to heal. This will need one more heal from the remaining source to sink for the complete self-heal. This is not optimal. Fix: Upgrade non-blocking locks to blocking lock on all the subvolumes, if the number of locks acquired is majority and there were eagains. >BUG: 1318751 >Change-Id: Iae10b8d3402756c4164b98cc49876056ff7a61e5 >Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> >Reviewed-on: http://review.gluster.org/13766 >Smoke: Gluster Build System <jenkins@build.gluster.com> >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> >CentOS-regression: Gluster Build System <jenkins@build.gluster.com> >Reviewed-by: Ravishankar N <ravishankar@redhat.com> >(cherry picked from commit 8deedef565df49def75083678f8d1558c7b1f7d3) Change-Id: Ia164360dc1474a717f63633f5deb2c39cc15017c BUG: 1327863 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/14008 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* features/shard: Make o-direct writes work with shardingKrutika Dhananjay2016-04-161-0/+6
| | | | | | | | | | | | | | | | | | | | | Backport of: http://review.gluster.org/#/c/13846/ With files opened with o-direct, the expectation is that the IO performed on the fds is byte aligned wrt the sector size of the underlying device. With files getting sharded, a single write from the application could be broken into more than one write falling on different shards which _might_ cause the original byte alignment property to be lost. To get around this, shard translator will send fsync on odirect writes to emulate o-direct-like behavior in the backend. Change-Id: I992e10162afcca17a19d9cba3bcb187a31c618ae BUG: 1325843 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/13966 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* cluster/afr: Fix witness counting code in src/sink detectionPranith Kumar K2016-04-161-7/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: In afr-v1 pre-op, xattrop increments self xattr first then it increments the value on rest. In post-op, xattr value is decreased first on rest and at last it gets decremented on self. So for a possible operation to be witnessed i.e. a fop is seen by the brick it is important to have at least 1 pending op because without completing pre-op fop won't come. The other possibility is when fop completes but at the time of post-op after decrementing pending counts on others just before decrementing its own pending count, the brick dies. Fix: Fix witness detection code in afr_self_heal_find_direction() >BUG: 1322253 >Change-Id: Ia7e76482c0a46e775e269bb96ec1b9490a3ac18f >Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> >Reviewed-on: http://review.gluster.org/13811 >Smoke: Gluster Build System <jenkins@build.gluster.com> >CentOS-regression: Gluster Build System <jenkins@build.gluster.com> >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> >Reviewed-by: Ravishankar N <ravishankar@redhat.com> >(cherry picked from commit e88962f8c49ea1d65fa26703e5c11be3f21af2ba) Change-Id: I5d9a6d323b35409127c26f3ce61c5e1d91395b18 BUG: 1326212 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/13975 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* Revert "glusterd: Bug fixes for IPv6 support"Kaushal M2016-04-166-103/+4
| | | | | | | | This reverts commit b33f3c95ec9c8112e6677e09cea05c4c462040d0. This commit exposes some issues with management encryption that prevents GlusterFS from operating properly. This will be added again once problems with management encryption are fixed.
* posix_acl: create inode ctx for posix_acl_getvmallika2016-04-151-10/+26
| | | | | | | | | | | | | | | | | This is a backport of http://review.gluster.org/13961 > Change-Id: Ibe5b00cd4b5d896133adc61f65094d783c492ed4 > BUG: 1325822 > Signed-off-by: vmallika <vmallika@redhat.com> Change-Id: I6be941044ea430913bb950c202f65a1c642d7ae4 BUG: 1325826 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/13962 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* glusterd: coverity fix for insecure temporary fileSakshi2016-04-152-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | Set umask before creating temporary file Backport of http://review.gluster.org/9558 > Change-Id: Ia39af63b05ce68f3f3af6585b70d4129a5530269 > BUG: 789278 > Signed-off-by: Sakshi <sabansal@redhat.com> > Reviewed-on: http://review.gluster.org/9558 > Smoke: Gluster Build System <jenkins@build.gluster.com> > Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> > CentOS-regression: Gluster Build System <jenkins@build.gluster.com> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Change-Id: Ia39af63b05ce68f3f3af6585b70d4129a5530269 BUG: 1215026 Signed-off-by: Sakshi <sabansal@redhat.com> Reviewed-on: http://review.gluster.org/13984 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* cluster/afr: Don't delete gfid-req from lookup requestPranith Kumar K2016-04-122-5/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: Afr does dict_ref of the xattr_req that comes to it and deletes "gfid-req" key. Dht uses same dict to send lookup to other subvolumes. So in case of directories and more than 1 dht subvolumes, second subvolume till the last subvolume won't get a lookup request with "gfid-req". So gfid reset never happens on the directories in distributed replicate subvolume for 2nd till last subvolumes. Fix: Make a copy of lookup xattr request. Also fixed replies_wipe possibly resetting gfid to NULL gfid >BUG: 1312816 >Change-Id: Ic16260e5a4664837d069c1dc05b9e96ca05bda88 >Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> >Reviewed-on: http://review.gluster.org/13545 >Smoke: Gluster Build System <jenkins@build.gluster.com> >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> >CentOS-regression: Gluster Build System <jenkins@build.gluster.com> >Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> >(cherry picked from commit 9b022c3a3f2f774904b5b458ae065425b46cc15d) Change-Id: Ia68193b559ec1dfd841cc5a22ef1fa801b866200 BUG: 1313693 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/13574 CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.com>
* arbiter: write performance improvementRavishankar N2016-04-114-34/+82
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Backport of: http://review.gluster.org/#/c/13906 Problem: The throughput for a 'dd' workload was much less for arbiter configuration when compared to normal replica-3 volume. There were 2 issues: i)arbiter_writev was using the request dict as response dict while unwinding, leading to incorect GLUSTERFS_WRITE_IS_APPEND and GLUSTERFS_OPEN_FD_COUNT values (=4), leading to immediate post-ops because is_afr_delayed_changelog_post_op_needed() failed due to afr_are_multiple_fds_opened() check. ii) The arbiter code in afr was setting local->transaction.{start and len} =0 to take full file locks. What this meant was even for simultaenous but non-overlapping writevs, afr_transaction_eager_lock_init() was not happening because afr_locals_overlap() always stays true. Consequently is_afr_delayed_changelog_post_op_needed() failed due to local->delayed_post_op not being set. Fix: i) Send appropriate response dict values in arbiter_writev. ii) Modify flock params instead of local->transaction.{start and len} to take full file locks in the transaction. Also changed _fill_writev_xdata() in posix to fill rsp_xdata for whatever key is requested for. Change-Id: I1c5fc5e98aba49ade540bb441a022e65b753432a BUG: 1324809 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reported-by: Robert Rauch <robert.rauch@gns-systems.de> Reported-by: Russel Purinton <russell.purinton@gmail.com> Reviewed-on: http://review.gluster.org/13925 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* dht: lock on subvols to prevent rename and lookup selfheal raceSakshi2016-04-101-43/+158
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch addresses two races while renaming directories: 1) While renaming src to dst, if a lookup selfheal is triggered it can recreate src on those subvols where rename was successful. This leads to multiple directories (src and dst) having same gfid. To avoid this we must take locks on all subvols with src. 2) While renaming if the dst exists and a lookup selfheal is triggered it will find anomalies in the dst layout and try to heal the stale layout. To avoid this we must take lock on any one subvol with dst. Backport of http://review.gluster.org/#/c/11880/ > Change-Id: I637f637d3241d9065cd5be59a671c7e7ca3eed53 > BUG: 1252244 > Signed-off-by: Sakshi <sabansal@redhat.com> Change-Id: I637f637d3241d9065cd5be59a671c7e7ca3eed53 BUG: 1324381 Signed-off-by: Sakshi <sabansal@redhat.com> Reviewed-on: http://review.gluster.org/13917 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* cluster/ec: Do not ref dictionary in lookupPranith Kumar K2016-04-091-7/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: 1) dict_for_each loops over the elements without any locks, so the members of the dictionary can be ref/unrefed while dict_for_each is executed by another thread leading to crashes. Basically with distributed ec + disctributed replicate as cold, hot tiers. tier sends a lookup which fails on ec. (By this time dict already contains ec xattrs) After this lookup_everywhere code path is hit in tier which triggers lookup on each of distribute's hash lookup but fails which leads to the cold, hot dht's lookup_everywhere in two parallel epoll threads where in ec when it tries to set trusted.ec.version/dirty/size as keys in the dictionary, the older values against the same key get erased. While this erasing is going on if the thread that is doing lookup on afr's subvolume accesses these keys either in dict_copy_with_ref or client xlator trying to serialize, that can either lead to crash or hang based on if the spin/mutex lock is called on invalid memory. 2) EC deletes GF_CONTENT_KEY from the dictionary, this may lead to extra reads in case of lookup-everwhere for tiered volumes. Fix: Do dict_copy_with_ref() for the lookup-dictionary. This is avoiding the problem and is not actually fixing the 1st problem. 2nd problem will be fixed. >Change-Id: I5427aa14c48cb7572977d4de9a28c5ffff2b4b95 >BUG: 1315560 >Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> >Reviewed-on: http://review.gluster.org/13680 >Smoke: Gluster Build System <jenkins@build.gluster.com> >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> >CentOS-regression: Gluster Build System <jenkins@build.gluster.com> >Reviewed-by: Xavier Hernandez <xhernandez@datalab.es> >(cherry picked from commit 64cba025b13aad7fb3020a04930cfa22fbfcb859) Change-Id: I2828a0d9e730bc4b0ea6cee037365131767ae43e BUG: 1322520 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/13859 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Ravishankar N <ravishankar@redhat.com> Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com>
* posix_acl: skip acl_permits for special clientsvmallika2016-04-061-11/+28
| | | | | | | | | | | | | | | | | | | | | This is a backport of http://review.gluster.org/13894 > Change-Id: I3f478b7e4ecab517200f50eb09f65a634c029437 > BUG: 1320818 > Signed-off-by: vmallika <vmallika@redhat.com> > Reviewed-on: http://review.gluster.org/13894 > Smoke: Gluster Build System <jenkins@build.gluster.com> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > Reviewed-by: jiffin tony Thottan <jthottan@redhat.com> > CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Change-Id: I5bb727857e94feb4c86574cf2985c71d8b9ad1d7 BUG: 1320817 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/13909 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* marker: do mq_reduce_parent_size_txn in FG for unlink & rmdirvmallika2016-04-063-32/+90
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a backport of http://review.gluster.org/#/c/13874/ * If a "rm -rf" is performed by a client, we initiate a marker background operation mq_reduce_parent_size_txn for rmdir and unlink. mq_reduce_parent_size_txn can fail when updating size on the ancestor directories, if these directories are removed during the txn as the child-parent association removed in the dentry list. So execute mq_reduce_parent_size_txn in foreground and then do the UNWIND for rmdir and unlink FOP > Change-Id: Iefcdced4c6ae0dbd43f92814d0ddcd1e33825864 > BUG: 1322489 > Signed-off-by: vmallika <vmallika@redhat.com> Change-Id: I79e4b53e4bacd39d23dad5278a7d02a338e59195 BUG: 1324040 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/13910 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* marker: optimize mq_update_dirty_inode_taskvmallika2016-04-061-50/+44
| | | | | | | | | | | | | | | | | | | | | This is a backport of http://review.gluster.org/#/c/13892/ In function mq_update_dirty_inode_task we do readdirp on a dirty directory and for entry we again do lookup to fecth the contribution xattr. We can fetch this contribution as part of readdirp > Change-Id: I766593c0dba793f1ab3b43625acce1c7d9af8d7f > BUG: 1320818 > Signed-off-by: vmallika <vmallika@redhat.com> Change-Id: Id826a09a72529f7435372ea7f04068dd10da5fcb BUG: 1324040 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/13908 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* dht: lock on subvols to prevent lookup vs rmdir raceSakshi2016-04-065-88/+435
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a possibility that while an rmdir is completed on some non-hashed subvol and proceeding to others, a lookup selfheal can recreate the same directory on those subvols for which the rmdir had succeeded. Now the deletion of the parent directory will fail with an ENOTEMPTY. To fix this take blocking inodelk on the subvols before starting rmdir. Selfheal must also take blocking inodelk before creating the entry. Backport of http://review.gluster.org/13528 > Change-Id: I168a195c35ac1230ba7124d3b0ca157755b3df96 > BUG: 1245065 > Signed-off-by: Sakshi <sabansal@redhat.com> > Reviewed-on: http://review.gluster.org/13528 > CentOS-regression: Gluster Build System <jenkins@build.gluster.com> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > Smoke: Gluster Build System <jenkins@build.gluster.com> > Reviewed-by: Raghavendra G <rgowdapp@redhat.com> > Tested-by: Raghavendra G <rgowdapp@redhat.com> Change-Id: I168a195c35ac1230ba7124d3b0ca157755b3df96 BUG: 1257894 Signed-off-by: Sakshi <sabansal@redhat.com> Reviewed-on: http://review.gluster.org/13915 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* quota: check inode limits only when new file/dir is createdvmallika2016-04-062-10/+27
| | | | | | | | | | | | | | | | | | | | This is a backport of http://review.gluster.org/#/c/13911/ When a inode limit is full, writes to any existing file fails with disk quota exceed even if usage limit is not set or usage limit is not full. > BUG: 1323486 > Change-Id: I9679fe26a2839ade0b1541fa7f0a2b71ac6dcc31 > Signed-off-by: vmallika <vmallika@redhat.com> Change-Id: I55ec86ebecbb8490e557c61090f6fb8c6c449ec7 BUG: 1324058 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/13912 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* marker: build_ancestry in markervmallika2016-04-063-19/+162
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a backport of http://review.gluster.org/#/c/13857/ * quota-enforcer doesn't execute build_ancestry in the below code path 1) Special client (PID < 0) 2) unlink 3) rename within the same directory 4) link within the same directory In these cases, marker accounting can fail as parent not found. We need to build_ancestry in marker if it doesn't find parent during update txn > Change-Id: Idb7a2906500647baa6d183ba859b15e34769029c > BUG: 1320818 > Signed-off-by: vmallika <vmallika@redhat.com> Change-Id: Ib56a556bdeebcc498d59599baf4655be05d765e5 BUG: 1324040 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/13907 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* cluster/dht/rebalance: rebalance failure handlingSusant Palai2016-04-051-21/+141
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At current state rebalance aborts basically on any failure like fix-layout of a directory, readdirp, opendir etc. Unless it is not a remove-brick process we can ignore these failures. Major impact: Any failure in the gf_defrag_process_dir means there are files left unmigrated in the directory. Fix-layout(setxattr) failure will impact it's child subtree i.e. the child subtree will not be rebalanced. Settle-hash (commit-hash)failure will trigger lookup_everywhere for immediate children until the next commit-hash. Note: Remove-brick opertaion is still sensitive to any kind of failure. Change-Id: I2f67a490e4e7d06423bb5bc010a1373a74a6af1d BUG: 1318196 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: http://review.gluster.org/12013 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: http://review.gluster.org/13749 Tested-by: N Balachandran <nbalacha@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Smoke: Gluster Build System <jenkins@build.gluster.com>
* glusterd: build realpath post recreate of brick mount for snapshotAtin Mukherjee2016-04-051-16/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/#/c/13869 Commit a60c39d introduced a new field called real_path in brickinfo to hold the realpath() conversion. However at restore path for all snapshots and snapshot restored volumes the brickpath gets recreated post restoration of bricks which means the realpath () call will fail here for all the snapshots and cloned volumes. Fix is to store the realpath for snapshots and clones post recreating the brick mounts. For normal volume it would be done during retrieving the brick details from the store. Change-Id: Ia34853acddb28bcb7f0f70ca85fabcf73276ef13 BUG: 1324014 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/13869 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Avra Sengupta <asengupt@redhat.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-on: http://review.gluster.org/13905 Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: fill real_path variable in brickinfo during volume importMohammed Rafi KC2016-04-051-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Variable "real_path" in brick info was used to store absolute path and using this we check the availability of the newly added bricks. But we were not populating the variable when we import a volume from peers. That caused to reset the real_path variable to zero, which resulted in validation failure for all new brick creation. Backport of> >Change-Id: I62be7bf452f0dcdf6aec3a4ec33c2e1fba2951ca >BUG: 1323287 >Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> >Reviewed-on: http://review.gluster.org/13890 >Reviewed-by: Atin Mukherjee <amukherj@redhat.com> >Smoke: Gluster Build System <jenkins@build.gluster.com> >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> >CentOS-regression: Gluster Build System <jenkins@build.gluster.com> (cherry picked from commit 648357ffad482a1bda8915d42df9d5b055dae44f) Change-Id: I6937f83bb50277a396944edc3cf0b0ed82facc3a BUG: 1324156 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/13914 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* afr: add mtime based split-brain resolution to CLIRavishankar N2016-04-042-10/+72
| | | | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/#/c/13828/ Extended the CLI to include support for split-brain resolution based on mtime. The command syntax is: $:gluster volume heal <VOLNAME> split-brain latest-mtime <FILE> where <FILE> can be either the full file name as seen from the root of the volume (or) the gfid-string representation of the file. Change-Id: I7a16f72ff1a4495aa69f43f22758a9404e958b4f BUG: 1321748 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/13838 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Anuradha Talur <atalur@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* storage/posix: send proper iatt attributes for the root inodevmallika2016-04-046-70/+165
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a backport of http://review.gluster.org/13730 * changes in posix to send proper iatt attributes for the root directory when ancestry is built. Before posix was filling only the gfid and the inode type in the iatt structure keeping rest of the fields zeros. This was cached by posix-acl and used to send EACCES when some fops came on that object if the uid of the caller is same as the uid of the object on the disk. * getting and setting inode_ctx in function 'posix_acl_ctx_get' is not atomic and can lead to memory leak when there are multiple lookups for an inode at same time. This patch fixes this problem * Linking an inode in posix_build_ancestry, can cause a race in posix_acl. When parent inode is linked in posix_build_ancestry, and before it reaches posix_acl_readdirp_cbk, create/lookup can come on a leaf-inode, as parent-inode-ctx not yet updated in posix_acl_readdirp_cbk, create/lookup can fail with EACCESS. So do the inode linking in the quota xlator > Change-Id: I3101eefb65551cc4162c4ff2963be1b73deacd6d > BUG: 1320818 > Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> > Reviewed-on: http://review.gluster.org/13730 > Tested-by: Vijaikumar Mallikarjuna <vmallika@redhat.com> > Smoke: Gluster Build System <jenkins@build.gluster.com> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > CentOS-regression: Gluster Build System <jenkins@build.gluster.com> > Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Change-Id: I65b0bbf83e563b519db07f2bcddcc6465743b6ea BUG: 1320892 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/13825 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* tier/dht : Attach tier fix layout to run in backgroundJoseph Fernandes2016-04-012-24/+247
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. Spawn a thread for background fix-layout for tier process. 2. Once the fix-layout is completed a marker xttr is set on the root of volume to mark the completion of the background fixlayout, so that even if the tier process is spawned again, fixlayout will not be issued, if it was completed last time. 3. Please note that promotion of legacy files will happen eventually as the ctr lookup heal in the fixlayout slowly heals the ctr db for legacy files OR the ctr lookup heal happend due to a name lookup. 4. When a detach tier is successful in evacuation data from hot tier, we remove the marker xattr is removed. So that next attach tier runs the background tier fixlayout. what is remaining ? 1. Instead of clearing the marker xattr of tiering fix layout at the end of detach start clear it during detach commit. But the issue is detach commit is a glusterd operation and the volume is not mounted in glusterd. The reason we want to do it in detach commit is that if the admin wants to attach the same tier again, then a background fixlayout will be triggered, which would not be needed. 2. Clearing the CTR DB of the cold bricks when there is a detach commit, as it will be having entries which will be stale when the volume is used, with ctr off (ctr is switched off only when we have detach commit.) Backport of http://review.gluster.org/13491 > Change-Id: Ibe343572e95865325cd0eef4d0b976b626a3c0c5 > BUG: 1313228 > Signed-off-by: Joseph Fernandes <josferna@redhat.com> > Reviewed-on: http://review.gluster.org/13491 > Smoke: Gluster Build System <jenkins@build.gluster.com> > Tested-by: Joseph Fernandes > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > CentOS-regression: Gluster Build System <jenkins@build.gluster.com> > Reviewed-by: Dan Lambright <dlambrig@redhat.com> Signed-off-by: Joseph Fernandes <josferna@redhat.com> Change-Id: Ic28affdf78d2ac0f394f3dd59f0126df7915d609 BUG: 1323016 Reviewed-on: http://review.gluster.org/13879 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Joseph Fernandes Tested-by: Joseph Fernandes NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com>
* Revert "cluster/ec: Rebalance hangs during rename"Kaushal M2016-04-015-177/+50
| | | | | | | This reverts commit 3d34c495d547866a533bc0614b14163381830095, which broke building rpms and possibly other packages as well. Change-Id: I2c10a613599e63bc0cbdb1b405cd87be9efa4a99
* features/changelog: Don't modify 'pargfid' in 'resolve_pargfid_to_path'Kotresh HR2016-03-312-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/#/c/13845/ If 'changelog' is enabled and 'changelog.capture-del-path' option is on it calls 'resolve_pargfid_to_path' which modifies 'pargfid' sent by caller. 'changelog_unlink' calls this routine directly with 'loc->pargfid' resulting it being modified and point to root instead of actual pargfid. This is a nasty bug and could cause the deletion of entry on root directory instead on actual parent when 'loc->path' is not present. Hence this fix to make 'pargfid' a const pointer and 'resolve_pargfid' to work on copy of pargfid. Glusterfind session creation enables these options by default to capture deleted entry path in changelog. Thanks Pranith for root causing this. BUG: 1322552 Change-Id: I9f2bc44b5604b224462594c12b7d79e68198d693 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/13861 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* cluster/ec: Rebalance hangs during renameAshish Pandey2016-03-315-50/+177
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: During the rename of a particular file (ec is holding blocking inodelk on the parent directory), if the rename of another file under the same directory comes. EC does not release the lock and goes ahead and renames the "new" file with the "already held lock". That causes rebalance process to be blocked on a lock which has been acquired by rename. Solution: While rename fop comes, ec takes blocking inodelk on old and new parent of the file. Before releasing, every lock held by ec, it waits for some "time" to see if that lock can be reused by the next fop. If within this "time" some other request comes, it releases this lock based on condition "lock count > 1" To get this "lock count" for rename fop, we have implemented "pl_rename" in feature/lock. Also, on ec side, changed the condition to release the lock based on the type of fop and old and new parent directories. master- http://review.gluster.org/#/c/13460/ Change-Id: I979dbab1185df962e8f305a6074ae1186ffe7db0 Bug: 1322299 Signed-off-by: Ashish Pandey <aspandey@redhat.com> Reviewed-on: http://review.gluster.org/13849 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* server: send lookup on root inode when itable is createdvmallika2016-03-318-31/+139
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a backport of http://review.gluster.org/#/c/13837 * xlators like quota, marker, posix_acl can cause problems if inode-ctx are not created. sometime these xlarors may not get lookup on root inode with below cases 1) client may not send lookup on root inode (like NSR leader) 2) if the xlators on one of the bricks are not up, and client sending lookup during this time: brick can miss the lookup It is always better to make sure that there is one lookup on root. So send a first lookup when the inode table is created * When sending lookup on root, new inode is created, we need to use itable->root instead > Change-Id: Iff2eeaa1a89795328833a7761789ef588f11218f > BUG: 1320818 > Signed-off-by: vmallika <vmallika@redhat.com> > Reviewed-on: http://review.gluster.org/13837 > Smoke: Gluster Build System <jenkins@build.gluster.com> > CentOS-regression: Gluster Build System <jenkins@build.gluster.com> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Change-Id: I0abf45444c21b3bc77b5a75ab9a2049a411048d3 BUG: 1320892 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/13862 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* md-cache: Cache gluster-swift metadataPrashanth Pai2016-03-312-0/+30
| | | | | | | | | | | | | | | | | | | | | | > BUG: 1317785 > Change-Id: Ie02b8fc294802f8fdf49dee8bf97f1e6177d92bd > Signed-off-by: Prashanth Pai <ppai@redhat.com> > Reviewed-on: http://review.gluster.org/13735 > Smoke: Gluster Build System <jenkins@build.gluster.com> > Reviewed-by: Poornima G <pgurusid@redhat.com> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > CentOS-regression: Gluster Build System <jenkins@build.gluster.com> > Reviewed-by: Niels de Vos <ndevos@redhat.com> > Reviewed-by: Gaurav Kumar Garg <ggarg@redhat.com> BUG: 1317788 Change-Id: I86efca6a829cdda70ec7ed7fe0a16b73c25888c3 Signed-off-by: Prashanth Pai <ppai@redhat.com> Reviewed-on: http://review.gluster.org/13753 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com>
* features/index: Get gfid type in readdirPranith Kumar K2016-03-311-1/+46
| | | | | | | | | | | | | | | | | | | | | | >Change-Id: I2a6174e1af70a94a52b0b735fd8504800a7ea173 >BUG: 1313135 >Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> >Reviewed-on: http://review.gluster.org/13553 >Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> >Smoke: Gluster Build System <jenkins@build.gluster.com> >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> >Reviewed-by: Anuradha Talur <atalur@redhat.com> >CentOS-regression: Gluster Build System <jenkins@build.gluster.com> >(cherry picked from commit 459d0a5e173f9d9f597aec89f81e5377425eb8fb) Change-Id: I3384906201129d3e03a56bc4b071302028f6953b BUG: 1322516 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/13858 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Anuradha Talur <atalur@redhat.com>
* cluster/afr: Choose local child as source if possiblePranith Kumar K2016-03-309-31/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | It is better to choose local brick as source if possible to prevent over the wire read thus saving on bandwidth. Also changed code to not attempt data-heal if 'source' is selected as arbiter. >Change-Id: I9a328d0198422280b13a30ab99545370a301dfea >BUG: 1314150 >Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> >Reviewed-on: http://review.gluster.org/13585 >Smoke: Gluster Build System <jenkins@build.gluster.com> >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> >Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> >Tested-by: Krutika Dhananjay <kdhananj@redhat.com> >CentOS-regression: Gluster Build System <jenkins@build.gluster.com> >Reviewed-by: Jeff Darcy <jdarcy@redhat.com> >(cherry picked from commit 2807e3fc005630213ab7ad251fef13d61c07ac6b) Change-Id: I24ea66683f81e238a6c1850664a49fe554011a0a BUG: 1322521 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/13860 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Ravishankar N <ravishankar@redhat.com>
* glusterd: Add a new event to handle multi-net probesKaushal M2016-03-304-4/+17
| | | | | | | | | | | | | | | | Backport of d0cb21b from master This allows GlusterD to send updates to all other nodes when attaching new addresses using multi-net peer probe. Change-Id: I62846be750ab3721912e7b49656594347ea61723 BUG: 1314366 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-originally-on: http://review.gluster.org/13817 Reviewed-on: http://review.gluster.org/13840 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
generated by cgit (git 2.34.1) at 2024-05-22 03:52:07 +0000