summaryrefslogtreecommitdiffstats
path: root/xlators
Commit message (Collapse)AuthorAgeFilesLines
* feature/geo-rep: Keep marker.tstamp's mtime unchangeable during snapshot.Kotresh H R2014-08-043-13/+125
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: Geo-replicatoin does a full xsync crawl after snapshot restoration of slave and master. It does not do history crawl. Analysis: Marker creates 'marker.tstamp' file when geo-rep is started for the first time. The virtual extended attribute 'trusted.glusterfs.volume-mark' is maintained and whenever it is queried on gluster mount point, marker fills it on the fly and returns the combination of uuid, ctime of marker.tstamp and others. So ctime of marker.tstamp, in other sense 'volume-mark' marks the geo-rep start time when the session is freshly created. From the above, after the first filesystem crawl(xsync) is done during first geo-rep start, stime should always be less than 'volume-mark'. So whenever stime is less than volume-mark, it does full filesystem crawl (xsync). Root Cause: When snapshot is restored, marker.tstamp file is freshly created losing the timestamps, it was originally created with. Solution: 1. Change is made to depend on mtime instead of ctime. 2. mtime and atime of marker.tstamp is restored back when snapshot is created and restored. Change-Id: I4891b112f4aedc50cfae402832c50c5145807d7a BUG: 1125918 Signed-off-by: Kotresh H R <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/8401 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* geo-rep/libgfchangelog: Support of symlinks while creation of working dir.Kotresh H R2014-08-041-1/+1
| | | | | | | | | | | | | In gf_changelog_register, enable symlink support while creating working directory if its not already created. Change-Id: I4b81762d04f5276a65087d2ff94f2a36dc504b58 BUG: 1125843 Signed-off-by: Kotresh H R <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/8409 Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* glusterd/snapshot: Inherit the mount options of a original brickVijaikumar M2014-08-037-122/+250
| | | | | | | | | | | | | | | | | | | | when creating snapshots When creating a snapshot a LVM is created at the backend and is mounted under /var/run/gluster/snaps/... However, this mount does not inherit the mount options for the original brick acting as the parent for the snap. If the snap is restored, this could lead to performance degredations, functional limitations, or in extreme scenarios even potential data loss. Change-Id: I67d70fd83430d83dacc5380c6c928e27fb9c9e1b BUG: 1125180 Signed-off-by: Vijaikumar M <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/8394 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* cluster/ec: Fix incorrect management of NFS requestsXavier Hernandez2014-08-023-89/+51
| | | | | | | | | | | | | | | | | | | Some operations, specially those comming from NFS, do not use a regular fd and use an anonymous fd (i.e. a previous open call has not been sent). Any context information created during open or create will not be present on these fd's, so we simply return NULL for contexts of those fd. Also it seems that NFS can send write requests with a very big buffer (higher that the default value of 128 KB). Some changes have been made to correctly handle these large buffers. Change-Id: I281476bd0d2cbaad231822248d6a616fcf5d4003 BUG: 1122417 Signed-off-by: Xavier Hernandez <xhernandez@datalab.es> Reviewed-on: http://review.gluster.org/8367 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* geo-rep/libgfchangelog: Create working dir during changelog_register if not ↵Kotresh H R2014-08-011-6/+15
| | | | | | | | | | | | | | | | | | | present. Earlier, xysnc's register was being called first, which was creating working directory before calling changelog_register. Now it is history crawl first. Hence working directory would not have been created. Create it in gf_changelog_register itself if it is not already created. Change-Id: Ief3f2b87deaf5da16c135b64be1be42e0a7647f3 BUG: 1125843 Signed-off-by: Kotresh H R <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/8399 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Aravinda VK <avishwan@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* storage/posix: fix issue in posix_fsyncZhang Huan2014-08-011-1/+2
| | | | | | | | | | | | | | Fix the issue that posix_fsync does not correctly return and save error code in op_errno when call to sys_fdatasync fails. Change-Id: Id0b62cfa009dbb52c8a0992abd5c46330fa0a8c0 BUG: 1125814 Signed-off-by: Zhang Huan <zhhuan@gmail.com> Reviewed-on: http://review.gluster.org/8398 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Reviewed-by: Santosh Pradhan <spradhan@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/dht: Modified logic of linkto file deletion on non-hashedVenkatesh Somyajulu2014-07-313-23/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently whenever dht_lookup_everywhere gets called, if in dht_lookup_everywhere_cbk, a linkto file is found on non-hashed subvolume, file is unlinked. But there are cases when this file is under migration. Under such condition, we should avoid deletion of file. When some other rebalance process changes the layout of parent such that dst_file (w.r.t. migration) falls on non-hashed node, then may be lookup could have found it as linkto file but just before unlink, file is under migration or already migrated In such cased unlink can be avoided. Race: ------- If we have two bricks (brick-1 and brick-2) with initial file "a" under BaseDir which is hashed as well as cached on (brick-1). Assume "a" hashing gives 44. Brick-1 Brick-2 Initial Setup: BaseDir/a BaseDir [1-50] [51-100] Now add new-brick Brick-3. 1. Rebalance-1 on node Node-1 (Brick-1 node) will reset the BaseDir Layout. 2. After that it will perform a) Create linkto file on new-hashed (brick-2) b) Perform file migration. 1.Rebalance-1 Fixes the base-layout: Brick-1 Brick-2 Brick-3 --------- ---------- ------------ BaseDir/a BaseDir BaseDir [1-33] [34-66] [67-100] 2. Only a) is BaseDir/a BaseDir/a(linkto) BaseDir performed Create linktofile Now rebalance 2 on node-2 jumped in and it will perform step 1 and 2-a. After (rebal-2, step-1), it changes the layout of the BaseDir. BaseDir/a BaseDir/a(link) BaseDir [67-100] [1-33] [34-66] For (rebale-2, step-2), It will perform lookup at Brick-3 as w.r.t new layout 44 falls for brick-3. But lookup will fail. So dht_lookup_everywhere gets called. NOTE: On brick-2 by rebalance-1, a linkto file was created. Currently that linkto files gets deleted by rebalance-2 lookup as it is considered as stale linkto file. But with patch if rebalance is already in progress or rebalance is over, linkto file will not be unlinked. If rebalance is in progress fd will be open and if rebalance is over then linkto file wont be set. Change-Id: I3fee0d28de3c76197325536a9e30099d2413f079 BUG: 1116150 Signed-off-by: Venkatesh Somyajulu <vsomyaju@redhat.com> Reviewed-on: http://review.gluster.org/8345 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* ec: Add -msse2 option to avoid fedora/rawhide compilation errorsXavier Hernandez2014-07-311-1/+1
| | | | | | | | | | | | | | | | | This solves a compilation error on some compiler versions. To avoid compilation issues on non-Intel architectures, patch http://review.gluster.org/8366/ has already been merged. It disables ec on those architectures. These modifications are temporary patches until a proper solution for bug #1125166 is ready. Change-Id: I74d0b79e84601cc4f86ad08ce0f8102b99a79a68 BUG: 1125168 Signed-off-by: Xavier Hernandez <xhernandez@datalab.es> Reviewed-on: http://review.gluster.org/8395 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* Symlink mtime changes when rebalancingAnders Blomdell2014-07-311-1/+2
| | | | | | | | | | | | | Added mtime preservation for special files during rebalance. Change-Id: If04921d4d66853fde8b4d8a3ab748790864f8f42 BUG: 1122443 Signed-off-by: Anders Blomdell <anders.blomdell@control.lth.se> Reviewed-on: http://review.gluster.org/8383 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> Reviewed-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-by: Anand Avati <avati@redhat.com>
* client/rpc: Add ping and msgs statsKrishnan Parthasarathi2014-07-311-0/+4
| | | | | | | | | | | | | | | | | | | This can be seen as below, ># cat $META/graphs/active/vol-client-0/private |grep ping_msgs_sent ping_msgs_sent = 2 ># cat $META/graphs/active/vol-client-0/private |grep "^msgs_sent" msgs_sent = 13 where $META is /<fuse-mountpt>/.meta Change-Id: I2107ec2b045bac701377760635e18758adb943a3 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/8285 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* build: fix compile issue in unittest on EPEL-5Niels de Vos2014-07-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | When building the current master branch on EPEL-5, the following error is observed: CC dht_layout_unittest-dht_layout_mock.o unittest/dht_layout_mock.c:77:2: error: no newline at end of file make[5]: *** [dht_layout_unittest-dht_layout_mock.o] Error 1 make[5]: *** Waiting for unfinished jobs.... EPEL-5 has this gcc: $ gcc --version gcc (GCC) 4.1.2 20080704 (Red Hat 4.1.2-54) The fix is simple enough, dht_layout_unittest-dht_layout_mock.c should have a line ending. BUG: 1124858 Change-Id: I8ca7a1699fd1c35694073b9577f94ae525854713 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/8392 Reviewed-by: Lalatendu Mohanty <lmohanty@redhat.com> Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Luis Pabon <lpabon@redhat.com>
* cluster/afr: Improve inodelk/entrylk failure log messagesKrutika Dhananjay2014-07-302-7/+18
| | | | | | | | | | | Change-Id: Ie792875546b4f8e11ebf870a6e63aaf5cb221976 BUG: 1121920 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/8344 Reviewed-by: Ravishankar N <ravishankar@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* glusterd: Error msg for snapshot status for no existing snapsVijaikumar M2014-07-301-35/+42
| | | | | | | | | | | | | | | | | should be aligned with error messages of info and list When a snapshot operation like status, info, list performed on a non-existing snapshot. For Status error message is displayed as 'Snap not found' For List and Info error message is displayed as 'Snapshot does not exist' Have the consistant error message all the places Change-Id: I7b241217dba62fda844481731a6858e4ecb12897 BUG: 1119641 Signed-off-by: Vijaikumar M <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/8309 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* glusterd/snapshot: Proper err msg for snapshot create commandRajesh Joseph2014-07-301-0/+77
| | | | | | | | | | | | | | | problem: Snapshot command fails if one or more bricks are not thinly provisioned. But the error message is a generic error message which is confusing to the user. fix: Provide correct error message in case of failure. Change-Id: Iad247f966423a8f73ef6da57cab7ed6cddc05861 BUG: 1123646 Signed-off-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-on: http://review.gluster.org/8377 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* dht: fix rename raceNithya Balachandran2014-07-301-2/+5
| | | | | | | | | | | | | Additional check to check if we created the linkto file before deleting it in the rename cleanup function Change-Id: I919cd7cb24f948ba4917eb9cf50d5169bb730a67 BUG: 1117851 Signed-off-by: Nithya Balachandran <nbalacha@redhat.com> Reviewed-on: http://review.gluster.org/8338 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* storage/posix: removing deleting entries in case of creation failuresRaghavendra G2014-07-304-41/+91
| | | | | | | | | | | | | The code is not atomic enough to not to delete a dentry created by a prallel dentry creation operation. Change-Id: I9bd6d2aa9e7a1c0688c0a937b02a4b4f56d7aa3d BUG: 1117851 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/8327 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Allow gluster to be used with linux automounterAnders Blomdell2014-07-271-1/+4
| | | | | | | | | | | | | Added (ignored) -n option to mount.glusterfs command Change-Id: I9209da215d38507cd9d01b1e9af4aecff4414f83 BUG: 1123004 Signed-off-by: Anders Blomdell <anders.blomdell@control.lth.se> Reviewed-on: http://review.gluster.org/8373 Reviewed-by: Harshavardhana <harsha@harshavardhana.net> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* rpc,glusterd: Set ret to 0 after call to rpc_clnt_submit()Krutika Dhananjay2014-07-271-3/+10
| | | | | | | | | | | | | | | | | This is to guard against a double STACK_DESTROY in the event that rpc_clnt_submit() failed and returned -1 anytime after sending the request over the wire. in which case the stack could be destroyed twice: once in the callback function of the request and once in the error codepath of some of the callers of glusterd_submit_request(). This bug was introduced in http://review.gluster.org/#/c/8257/ Change-Id: I18a345db6eafc62ba312743201ced7d3f8697622 BUG: 1116243 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/8301 Reviewed-by: Harshavardhana <harsha@harshavardhana.net> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Attempt to fix cmockery2 buildEmmanuel Dreyfus2014-07-271-1/+1
| | | | | | | | | | | | | | | | | | | The current code assumes cmockery2 is installed in default paths. Use PKG_MODULES_CHECK to find it using pkg-config if it is not. If not found by pkg-config, try AC_CHECK_LIB. There are also some build flag adjustement so that local overrides do not loose the required -I flags. This includes and enhance http://review.gluster.org/8340/ BUG: 764655 Change-Id: Ide9f77d1e70afe3c1c5c57ae2b93127af6a425f9 Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/8365 Reviewed-by: Harshavardhana <harsha@harshavardhana.net> Tested-by: Harshavardhana <harsha@harshavardhana.net> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* feature/snapshot : Interface to delete all snapshots belongingSachin Pandit2014-07-251-25/+186
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | to a system as-well-as to a particular volume. Problem : With the current design we can only delete a single snapshot. And the deletion of volume which contains snapshot is not allowed. Because of that user might be forced to delete all the snapshots manually before he is allowed to delete a volume. Solution: Following is the interface with which user can delete all the snapshots of a system or belonging to a particular volume. Syntax : gluster snapshot delete all *To delete all the snapshots present in a system Syntax : gluster snapshot delete volume <volname> *To deletes all the snapshot present in a volume specified. ======================================================================== Sample Output: Case 1 : Deleting a single snapshot. [root@snapshot-24 glusterfs]# gluster snapshot delete snap1 Deleting snap will erase all the information about the snap. Do you still want to continue? (y/n) y snapshot delete: snap1: snap removed successfully ----------------------------------------------------------------- Case 2 : Deleting all the snapshots in a Volume. [root@snapshot-24 glusterfs]# gluster snapshot delete volume vol1 Volume (vol1) contains 9 snapshot(s). Do you still want to continue and delete them? (y/n) y snapshot delete: snap2: snap removed successfully snapshot delete: snap3: snap removed successfully snapshot delete: snap4: snap removed successfully snapshot delete: snap5: snap removed successfully . . . ----------------------------------------------------------------- Case 3 : Deleting all the snapshots in a system. [root@snapshot-24 glusterfs]# gluster snapshot delete all System contains 4 snapshot(s). Do you still want to continue and delete them? (y/n) y snapshot delete: snap7: snap removed successfully snapshot delete: snap8: snap removed successfully snapshot delete: snap9: snap removed successfully snapshot delete: snap10: snap removed successfully ======================================================================== Change-Id: Ifec8e128ab2011cbbba208376b9c92cfbe7d8d71 BUG: 1112613 Signed-off-by: Sachin Pandit <spandit@redhat.com> Reviewed-on: http://review.gluster.org/8162 Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Avra Sengupta <asengupt@redhat.com> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* glusterd: update volinfo->subvol_count during remove-brick operation.Ravishankar N2014-07-241-2/+2
| | | | | | | | | | | | | | | | | | Problem: In glusterd_op_remove_brick(), volinfo->subvol_count was getting updated only if the replica count was reduced due to which subvol_matcher_verify() gave false errors under certain scenarios (see bug description). Fix: updated subvol_count for every remove-brick operation. Change-Id: Id72691e2bda1c624cd7d8cae92f6bf32c101a6d3 BUG: 1120647 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/8326 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* glusterd: Avoid spurious WARNING 'op_ctx modification failed'Harshavardhana2014-07-241-2/+35
| | | | | | | | | | | | | | This patch fixes by wrapping this whole scenario and skips op_ctx modification for necessary commands. Change-Id: I3ecec19caefdc699d9a2dabfb456a89758ae4aa4 BUG: 1066529 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/8337 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* cli: Xml output for geo-replication status command.ndarshan2014-07-241-0/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds xml output for geo-replication status and status detail command. sample: -------------------------------------------------------------- <geoRep> <volume> <name>master</name> <sessions> <session> <session_slave>:2a301d66-b9d2-44b4-b827-d680d67123eb:ssh://XXXXXXXXXX::slave</session_slave> <pair> <master_node>localhost.localdomain</master_node> <master_node_uuid>2a301d66-b9d2-44b4-b827-d680d67123eb</master_node_uuid> <master_brick>/root/master_b1</master_brick> <slave>ssh://XXXXXXXXXXX::slave</slave> <status>faulty</status> <checkpoint_status>N/A</checkpoint_status> <crawl_status>N/A</crawl_status> </pair> </session> </sessions> </volume> </geoRep> ------------------------------------------------------------- Change-Id: Ia19dbe751c3ab1ec7cb8923cdd6c8b99c374072f BUG: 1121518 Signed-off-by: ndarshan <dnarayan@redhat.com> Reviewed-on: http://review.gluster.org/8089 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* glusterd/snapshot: Print correct error message on cliVijaikumar M2014-07-241-0/+10
| | | | | | | | | | | | | | | | | | | | for snapshot operation performed on a cluster with op-version less than 30600 Currently we get error message as on cli 'Another transaction is in progress Please try again after sometime' when a snapshot operation is performed on a cluster with op-version less than 30600. We need to print the correct error message in this case. Change-Id: I5f144428d928393c3796bde96ce6e3a40fca8141 BUG: 1122816 Signed-off-by: Vijaikumar M <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/8371 Reviewed-by: Avra Sengupta <asengupt@redhat.com> Reviewed-by: Sachin Pandit <spandit@redhat.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* cli/snapshot : Dont display the snapshot hard-limit, soft-limitSachin Pandit2014-07-244-257/+222
| | | | | | | | | | | | | | | | | | | | | | | | | and auto-delete value in gluster volume info. Problem : Even though snap-max-hard-limit, snap-max-soft-limit and auto-delete values were not set explicitly, It was getting showed in the output of gluster volume info. Solution : Check if the value is already present in dictionary (That means, it is set), If value is not present then consider the default value, NOTE : This patch doesn't solve the problem where the values which is set globally are being displayed in gluster volume info Change-Id: I61445b3d2a12eb68c38a19bea53b9051ad028050 BUG: 1113476 Signed-off-by: Sachin Pandit <spandit@redhat.com> Reviewed-on: http://review.gluster.org/8191 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Avra Sengupta <asengupt@redhat.com> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* features/changelog: Capture "correct" internal FOPsVenky Shankar2014-07-233-11/+14
| | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes changelog capturing internal FOPs in a cascaded setup, where the intermediate master would record internal FOPs (generated by DHT on link()/rename()). This is due to I/O happening on the intermediate slave on geo-replication's auxillary mount with client-pid -1. Currently, the internal FOP capturing logic depends on client pid being non-negative and the presence of a special key in dictionary. Due to this, internal FOPs on an inter-mediate master would be recorded in the changelog. Checking client-pid being non-negative was introduced to capture AFR self-heal traffic in changelog, thereby breaking cascading setups. By coincidence, AFR self-heal daemon uses -1 as frame->root->pid thereby making is hard to differentiate b/w geo-rep's auxillary mount and self-heal daemon. Change-Id: Ib7bd71e80dd1856770391edb621ba9819cab7056 BUG: 1122037 Original-Author: Venky Shankar <vshankar@redhat.com> Signed-off-by: Kotresh H R <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/8347 Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Disable Erasure Code xlator if MMX is missingEmmanuel Dreyfus2014-07-231-1/+1
| | | | | | | | | | | | | Erasure Code xlator requires MMX instruction set. Disable building it if MMX is missing. BUG: 764655 Change-Id: Id9fe87db33e00c5630c1f3633ebd50fc4ebaec4d Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/8366 Reviewed-by: Xavier Hernandez <xhernandez@datalab.es> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* porting: include compat-errno.h for errno'sHarshavardhana2014-07-221-0/+1
| | | | | | | | | | | | | | | disperse module fails to compile since ENODATA is non-existent on FreeBSD/Darwin Use errno conversion in compat-errno.h to avoid build issues. Change-Id: I8203b7195c198c77202bde9bbec1813a487f923a BUG: 1111774 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/8320 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com>
* features/marker: Fill loc->path before sending the control to healingVarun Shastry2014-07-222-24/+42
| | | | | | | | | | | | | | | | | Problem: The xattr healing part of the marker requires path to be present in the loc. Currently path is not filled while triggering from the readdirp_cbk. Solution: Current patch tries to fill the loc with path. Change-Id: I5c7dc9de60fa79ca0fe9b58d2636fd1355add0d3 BUG: 1118591 Signed-off-by: Varun Shastry <vshastry@redhat.com> Reviewed-on: http://review.gluster.org/8296 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com>
* ec: Fixed coveriry scan issuesXavier Hernandez2014-07-219-39/+66
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CID list: 1226163 Logically dead code 1226166 Missing break in switch 1226167 Missing break in switch 1226168 Missing break in switch 1226169 Missing break in switch 1226170 Missing break in switch 1226171 Missing break in switch 1226172 Missing break in switch 1226173 Missing break in switch 1226174 Missing break in switch 1226175 Missing break in switch 1226176 Missing break in switch 1226177 Missing break in switch 1226178 Data race condition 1226179 Data race condition 1226180 Data race condition 1226181 Thread deadlock 1226182 Uninitialized pointer read 1226183 Uninitialized pointer read 1226184 Read from pointer after free Change-Id: I4d33aa42289371927175c43bb29e018df64fb943 BUG: 789278 Signed-off-by: Xavier Hernandez <xhernandez@datalab.es> Reviewed-on: http://review.gluster.org/8317 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* gluster: Fix the recursive goto outs in the source code.Avra Sengupta2014-07-213-14/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Added a script check_goto.pl, that when run from the source code root, will scan all .c files to match the following pattern: label: if (condition) goto label; On finding such a pattern the script will print the file name and the line number. There are certain cases where the above recursive pattern is intended. Hence adding those labels to ignore-labels. Thanks Vijaikumar Mallikarjuna for the perl script. Also fixed all such existing errors Change-Id: I1b821d0a8c296f16e40faff20bd029bdc880c2e9 BUG: 1119256 Signed-off-by: Vijaikumar Mallikarjuna <vmallika@redhat.com> Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/8307 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* build: add libraries to LIBADD instead of LDFLAGSTiziano Müller2014-07-193-8/+8
| | | | | | | | | | | | | | | For a number of linker flags the order of the object files and the libs to link against matter (for example -Wl,--as-needed). Make sure that libraries are added via the LIBADD variable instead of LDFLAGS and therefore always come after the object files. Change-Id: I59d114752a0c7664b8678a72082ba5e445497fe5 Signed-off-by: Tiziano Müller <tiziano.mueller@stepping-stone.ch> Reviewed-on: http://review.gluster.org/8331 Reviewed-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-by: Prashanth Pai <ppai@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* fuse: fuse_readlink_cbk() - linkname NULL termination unnecessaryHarshavardhana2014-07-181-6/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | op_ret incremented to compensate for NULL terminating character leads to self referential loop where OSXFUSE which would reply on a same READLINK() over and over again ~~~ [2014-07-12 08:41:29.815473] T [fuse-bridge.c:1372:fuse_readlink_cbk] 0-glusterfs-fuse: 1: /a/b/1 => ../../1 [2014-07-12 08:41:29.815820] T [fuse-bridge.c:1372:fuse_readlink_cbk] 0-glusterfs-fuse: 0: /a/b/1 => ../../1 [2014-07-12 08:41:29.816165] T [fuse-bridge.c:1372:fuse_readlink_cbk] 0-glusterfs-fuse: 1: /a/b/1 => ../../1 ~~~ It happens due to the problem being (op_ret + 1) > strlen(linkname), for some odd reason this isn't an issue on Linux where there are odd safegaurds on these things - Example of following code ~~~ ((char *)linkname)[op_ret] = '\0'; send_fuse_data (this, finh, (void *)linkname, op_ret + 2048); <---- Here! ~~~ This behaves normally with no issue, the reasoning i have is that internally 'readlink()' is verified with strlen() again or perhaps the size is re-adjusted to the strlen() of `linkname` This isn't the case on OSX, one needs to make sure that ~~~ strlen(linkname) == op_ret ~~~ Otherwise you would get READLINK() loops as shown above. This patch fixes the problem. Many thanks to Anand Avati for helping me out on this. Change-Id: Ia35818de78a5e4d89bad03ab06e2c5ed6e6753a4 BUG: 1095525 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/8300 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* build: Support for unit tests using Cmockery2Luis Pabon2014-07-183-0/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch will allow for developers to create unit tests for their code. Documentation has been added to the patch and is available here: doc/hacker-guide/en-US/markdown/unittest.md Also, unit tests are run when RPM is created. This patch is a replacement for http://review.gluster.org/#/c/7281 which removed unit test infrastucture from the repo due to multiple conflicts. Cmockery2 is now available in Fedora and EPEL, and soon to be available in Debian and Ubuntu. For all other operating systems, please install from the source: https://github.com/lpabon/cmockery2 BUG: 1067059 Change-Id: I1b36cb1f56fd10916f9bf535e8ad080a3358289f Signed-off-by: Luis Pabón <lpabon@redhat.com> Reviewed-on: http://review.gluster.org/7538 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* features/gfid-access: Print real-gfid in statedumpPranith Kumar K2014-07-181-0/+24
| | | | | | | | | | Change-Id: I1cac8f3ccfcf1fda64ff8470d4f2000d05dcab63 BUG: 1117733 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/8271 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kotresh HR <khiremat@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* DHT/mkdir : Fill the stbuf from the subvols on which directory creationSusant Palai2014-07-181-4/+0
| | | | | | | | | | | | | | | | | was successful. Problem: In case a mkdir sees EEXIST on a non-hashed subvol it reports error to the application. Change-Id: I44b2f32fc1069e609d788b6d25b9366b1460395c BUG: 1114557 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: http://review.gluster.org/8203 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-by: Anders Blomdell <anders.blomdell@control.lth.se> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* protocol/client: Log ENOENT and ENODATA messages to debug.Raghavendra Talur2014-07-181-4/+7
| | | | | | | | | | Change-Id: I6f8ccf1650ff74e46e5a93a6701d4e694118b273 BUG: 1120136 Signed-off-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-on: http://review.gluster.org/8315 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/dht: Fix races to avoid deletion of linkto fileVenkatesh Somyajulu2014-07-185-41/+401
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Explanation of Race between rebalance processes: https://bugzilla.redhat.com/show_bug.cgi?id=1110694#c4 STATE 1: BRICK-1 only one brick Cached File in the system STATE 2: Add brick-2 BRICK-1 BRICK-2 STATE 3: Lookup of File on brick-2 by this node's rebalance will fail because hashed file is not created yet. So dht_lookup_everywhere is about to get called. STATE 4: As part of lookup link file at brick-2 will be created. STATE 5: getxattr to check that cached file belongs to this node is done STATE 6: dht_lookup_everywhere_cbk detects the link created by rebalance-1. It will unlink it. STATE 7: getxattr at the link file with "pathinfo" key will be called will fail as the link file is deleted by rebalance on node-2 Fix: So in the STATE 6, we should avoid the deletion of link file. Every time dht_lookup_everywhere gets called, lookup will be performed on all the nodes. So to avoid STATE 6, if linkto file is found, it is not deleted until valid case is found in dht_lookup_everywhere_done. Case 1: if linkto file points to cached node, and cached file exists, uwind with success. Case 2: if linkto does not point to current cached node, and cached file exists: a) Unlink stale link file b) Create new link file Case 3: Only linkto file exists: Delete linkto file Case 4: Only cached file Create link file (Handled event without patch) Case 5: Neither cached nor hashed file is present Return with ENOENT (handled even without patch) Change-Id: Ibf53671410d8d613b8e2e7e5d0ec30fc7dcc0298 BUG: 1116150 Signed-off-by: Venkatesh Somyajulu <vsomyaju@redhat.com> Reviewed-on: http://review.gluster.org/8231 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* DHT/Create : Failing to identify a linkto file in lookup_everywhere_cbk pathv3.7devSusant Palai2014-07-171-7/+47
| | | | | | | | | | | | | | | In case a file is not found in its cached subvol we proceed with dht_lookup_everywhere. But as we dont add the linkto xattr to the dictionary, we fail to identify any linkto file encountered.The implication being we end up thinking the linkto file as a regular file and proceed with the fop. Change-Id: Iab02dc60e84bb1aeab49182f680c0631c33947e2 BUG: 1117923 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: http://review.gluster.org/8277 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* dht: fix rename raceJeff Darcy2014-07-172-3/+10
| | | | | | | | | | | | | | | | | | | | | | | If two clients try to rename the same file at the same time, we sometimes end up with *no file at all* in either the old or new location. That's kind of bad. The culprit seems to be some overly aggressive cleanup code. AFAICT, based on today's study of the code, the intent of the changed section is to remove any linkfile we might have created before the actual rename. However, what we're removing might not be our extra link. If we're racing with another client that's also doing a rename, it might be the only remaining link to the user's data. The solution, which is good enough to pass this test but almost certainly still not complete, is to be more selective about when we do this unlink. Now, we only do it if we know that, at some point, we did in fact create the link without error (notably ENOENT on the source or EEXIST on the destination) ourselves. Change-Id: I8d8cce150b6f8b372c9fb813c90be58d69f8eb7b BUG: 1117851 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/8269 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: Correctly reset volinfo->caps during volume createKaushal M2014-07-171-14/+12
| | | | | | | | | | Change-Id: I012899be08a06d39ea5c9fb98a66acf833d7213f BUG: 1120589 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/8323 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* porting: use __builtin_ffsll() instead of ffsll()Harshavardhana2014-07-161-0/+4
| | | | | | | | | | | | | - NetBSD/Darwin doesn't implement ffsll() - use Compiler builtin Change-Id: Iee78b4b81747b0bd3877fd2fcb98746f642ce080 BUG: 764655 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/8308 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Xavier Hernandez <xhernandez@datalab.es> Reviewed-by: Justin Clift <justin@gluster.org>
* make snapview-server more compatible with NFS serverRaghavendra Bhat2014-07-164-78/+228
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * There was no handle based API for listxattr. With this change, glfs_h_getxattrs also handles the listxattr functionality by checking whether the name is NULL or not (like posix). But all the gfapi functions for listxattr (glfs_h_getxattrs AND glfs_listxattr AND glfs_flistxattr) returns the names of the xattrs in a buffer provided by the caller. But snapview-server has to return the list of xattrs in a dict itself (similar to posix xlator). But the buffer just contains the names of the xattrs. So for each xattr, a zero byte value is set (i.e. "") into the dict and sent back. Translators which do xattr caching (as of now md-cache which caches selinux and acl related xattrs) should not cache those xattrs whose value is a zero byte data (""). So made changes in md-cache to ignore zero byte values. * NFS server was not linking the inodes to inode table in readdirp. This was leading to applications getting errors. The below set of operations would lead to applications getting error 1) ls -l in one of the snaopshots (snapview-server would generate gfids for each entry on the fly and link the inodes associated with those entries) 2) NFS server upon getting readdirp reply would not link the inodes of the entries. But it used to generate filehandles for each entry and associate the gfid of that entry with the filehandle and send it as part of the reply to nfs client. 3) NFS client would send the filehandle of one of those entries when some activity is done on it. 4) NFS server would not be able to find the inode for the gfid present in the filehandle (as the inode was not linked) and would go for hard resolution by sending a lookup on the gfid by creating a new inode. 5) snapview-client will not able to identify whether the inode is a real inode existing in the main volume or a virtual inode existing in the snapshots as there would not be any inode context. 6) Since the gfid upon which lookup is sent is a virtual gfid which is not present in the disk, lookup would fail and the application would get an error. To handle above situation, now nfs server also does inode linking in readdirp. Change-Id: Ibb191408347b6b5f21cff72319ccee619ea77bcd BUG: 1115949 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/8230 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* mgmt/glusterd: do not check for snapd handle in restore if uss is disabledRaghavendra Bhat2014-07-151-0/+19
| | | | | | | | | Change-Id: I01afe64685a5794cce9265580c6c5de57a045201 BUG: 1119582 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/8310 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* glusterd: Improvements to peer identificationKaushal M2014-07-1515-721/+1339
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch improves the peer identification mechanism in glusterd and lays down the framework for further improvements, including better multi network support in glusterd. This patch mainly does two things, 1. Extend the peerinfo object to store a list of addresses instead of a single hostname as it does now. This also includes changes to make the peer update behaviour of 'peer probe' to add to the list. 2. Improve glusterd_friend_find_by_hostname() to perform better matching of hostnames. glusterd_friend_find_by_hostname() now does and initial quick string compare against all the peer addresses known to glusterd, after which it tries a more thorough search using address resolution and matching the struc sockaddr's. The above two changes together improve the peer identification situation in glusterd a lot. More information regarding the problem this patch attempts to resolve and the approach chosen can be found at http://www.gluster.org/community/documentation/index.php/Features/Better_peer_identification This commit is a squashed commit of the following changes, the development branch of which can be viewed at, https://github.com/kshlm/glusterfs/tree/better-peer-identification or, https://forge.gluster.org/~kshlm/glusterfs-core/kshlms-glusterfs/commits/better-peer-identification commit 198f86e60fab74faf082eaa02657a4d8f60b92f0 Author: Kaushal M <kaushal@redhat.com> Date: Tue Jul 15 14:34:06 2014 +0530 Update gluster.8 commit 35d597f3a6b3248373e727f7b7e889c92554d56c Author: Kaushal M <kaushal@redhat.com> Date: Tue Jul 15 09:01:01 2014 +0530 Address review comments https://review.gluster.org/#/c/8238/3 commit 47b5331e17304477322bd2daed5bbed503c34ca1 Merge: c71b12c 78128af Author: Kaushal M <kaushal@redhat.com> Date: Tue Jul 15 08:41:39 2014 +0530 Merge branch 'master' into better-peer-identification commit c71b12c164330e8d19d1df4734ab34ef9a8caad2 Merge: 57bc9de 0f5719a Author: Kaushal M <kaushal@redhat.com> Date: Thu Jul 10 19:50:19 2014 +0530 Merge branch 'master' into better-peer-identification commit 57bc9de9e4f49ff2b1620df9906cda50a3527a25 Author: Kaushal M <kaushal@redhat.com> Date: Thu Jul 10 19:49:08 2014 +0530 More fixes to review comments commit 5482cc363a687a9e246a0780ec88acd53e218501 Author: Kaushal M <kaushal@redhat.com> Date: Thu Jul 10 18:36:40 2014 +0530 Code refactoring in peer-utils based on review comments https://review.gluster.org/#/c/8238/2/xlators/mgmt/glusterd/src/glusterd-peer-utils.c commit 89b22c34757178f64d5fbaffa31e6302f841c060 Author: Kaushal M <kaushal@redhat.com> Date: Thu Jul 10 12:30:00 2014 +0530 Hostnames in peer status commit 63ebf9485cf50d736cf640238a1ab241671fcaf1 Merge: c8c8fdd f5f9721 Author: Kaushal M <kaushal@redhat.com> Date: Thu Jul 10 12:06:33 2014 +0530 Merge remote-tracking branch 'origin/master' into better-peer-identification commit c8c8fdd2104b5b6b8a1af739b1dd952b74e6dd66 Author: Kaushal M <kaushal@redhat.com> Date: Wed Jul 9 18:35:27 2014 +0530 Hostnames in xml output commit 732a92a0167ad7b1d70edbc35ebd8307c2766ae1 Author: Kaushal M <kaushal@redhat.com> Date: Wed Jul 9 15:12:10 2014 +0530 Add hostnames to cli rsp dict during list-friends commit fcf43e3e317508f0c225024738a988a4af8e9205 Merge: c0e2624 72d96e2 Author: Kaushal M <kaushal@redhat.com> Date: Wed Jul 9 12:53:03 2014 +0530 Merge branch 'master' into better-peer-identification commit c0e262416728a3c536a8347a216e471eb2251535 Author: Kaushal M <kaushal@redhat.com> Date: Mon Jul 7 16:11:19 2014 +0530 Use list_for_each_entry_safe when cleaning peer hostnames commit 6132e60224eb592f3657e535a12a3e72c772da42 Author: Kaushal M <kaushal@redhat.com> Date: Mon Jul 7 15:52:19 2014 +0530 Fix crash in gd_add_friend_to_dict commit 88ffa9a508fd5aac0b2a76e6e76487ce0cab786a Author: Kaushal M <kaushal@redhat.com> Date: Mon Jul 7 13:19:44 2014 +0530 gd_peerinfo_destroy -> glusterd_peerinfo_destroy commit 4b36930a715b1e13cd1a77d136ef1cf78a06d574 Author: Kaushal M <kaushal@redhat.com> Date: Mon Jul 7 12:50:12 2014 +0530 More refactoring commit ee559b081d608c6501c10ae22166f26eeb65690e Author: Kaushal M <kaushal@redhat.com> Date: Mon Jul 7 12:14:40 2014 +0530 Major refactoring of code based on review comments at https://review.gluster.org/#/c/8238/1/xlators/mgmt/glusterd/src/glusterd-peer-utils.h commit e96dbc7bbb05fad2a9c424de41a394b8023fe48d Merge: 2613d1d 83c09b7 Author: Kaushal M <kaushal@redhat.com> Date: Mon Jul 7 09:47:05 2014 +0530 Merge remote-tracking branch 'origin/master' into better-peer-identification commit 2613d1daebff0c56812de821c06ed4c16bb9d447 Merge: b242cf6 9a50211 Author: Kaushal M <kaushal@redhat.com> Date: Fri Jul 4 15:28:57 2014 +0530 Merge remote-tracking branch 'origin/master' into better-peer-identification commit b242cf66d95dd3dd5e3975aa430baa6bd74b8a29 Author: Kaushal M <kaushal@redhat.com> Date: Fri Jul 4 15:08:18 2014 +0530 Fix a silly mistake, if (ctx->req) => if (ctx->req == NULL) commit c835ed26433830ceed57289143f596cf60421558 Author: Kaushal M <kaushal@redhat.com> Date: Fri Jul 4 14:58:23 2014 +0530 Fix reverse probe. commit 9ede17f9329b854b02e8ad159f173244789fd08c Author: Kaushal M <kaushal@redhat.com> Date: Fri Jul 4 13:31:32 2014 +0530 Fix friend import for existing peers commit 891bf74c7350064dfb008d1b7294bcec28d680fd Author: Kaushal M <kaushal@redhat.com> Date: Fri Jul 4 13:08:36 2014 +0530 Set first hostname in peerinfo->hostnames to peerinfo->hostname commit 9421d6a217381a7427a7d84f369280883ca4297a Author: Kaushal M <kaushal@redhat.com> Date: Fri Jul 4 12:21:40 2014 +0530 Fix gf_asprintf return val check in glusterd_store_peer_write commit defac978c1d94011ce8195e311839b9ffce057e7 Author: Kaushal M <kaushal@redhat.com> Date: Fri Jul 4 11:16:13 2014 +0530 Fix store_retrieve_peers to correctly cleanup. commit 00a799f5de1121b0cb7421da8285f9407063e1bd Author: Kaushal M <kaushal@redhat.com> Date: Fri Jul 4 10:52:11 2014 +0530 Update address list in glusterd_probe_cbk only when needed. commit 7a628e8a9c562d85709c69cfa13fb1774c521b75 Merge: d191985 dc46d5e Author: Kaushal M <kaushal@redhat.com> Date: Fri Jul 4 09:24:12 2014 +0530 Merge remote-tracking branch 'origin/master' into better-peer-identification commit d1919858e6639d2b54d716a61f662d9752ec5ff1 Author: Kaushal M <kaushal@redhat.com> Date: Tue Jul 1 18:59:49 2014 +0530 gf_compare_addrinfo -> gf_compare_sockaddr commit 31d8ef730d408f8d9ba8f504fa648f7dcd59da87 Merge: 93bbede 86ee233 Author: Kaushal M <kaushal@redhat.com> Date: Tue Jul 1 18:16:13 2014 +0530 Merge remote-tracking branch 'origin/master' into better-peer-identification commit 93bbedeac5181e29f59b2acd08f638146812ec41 Author: Kaushal M <kaushal@redhat.com> Date: Tue Jul 1 18:15:16 2014 +0530 Improve glusterd_friend_find_by_hostname glusterd_friend_find_by_hostname will now do an initial quick search for the peerinfo performing string comparisions on the given host string. It follows it with a more thorough match, by resolving the addresses and comparing addrinfos instead of strings. commit 2542cdbc45aa9cfcaf1f174686158d5565cdd07b Author: Kaushal M <kaushal@redhat.com> Date: Tue Jul 1 17:21:10 2014 +0530 New utility gf_compare_addrinfo commit 338676e8389a44bd91136eebd110197429c2566c Author: Kaushal M <kaushal@redhat.com> Date: Tue Jul 1 14:55:56 2014 +0530 Use gd_peer_has_address instead of strcmp commit 28d45be51f594328741c44455bd80ac9d64ca501 Merge: 728266e 991dd5e Author: Kaushal M <kaushal@redhat.com> Date: Tue Jul 1 14:54:40 2014 +0530 Merge branch 'master' into better-peer-identification commit 728266eb16d5f5a4bf36266044425ae164337f99 Merge: 7d9b87b 2417de9 Author: Kaushal M <kaushal@redhat.com> Date: Tue Jul 1 09:55:13 2014 +0530 Merge remote-tracking branch 'origin/master' into better-peer-identification commit 7d9b87b84955ec17daeaf88a3e7462914039430f Merge: b890625 e02275c Author: Kaushal M <kshlmster@gmail.com> Date: Tue Jul 1 08:41:40 2014 +0530 Merge pull request #4 from vpshastry/better-peer-identification Better peer identification commit e02275c52fb83c72ad082c098fd3e432c2b9c526 Merge: 75ee90d b890625 Author: Varun Shastry <vshastry@redhat.com> Date: Mon Jun 30 16:44:29 2014 +0530 Merge branch 'better-peer-identification' of https://github.com/kshlm/glusterfs into better-peer-identification-kaushal-github commit 75ee90d2f272e49b94d24c9ca4571e89a83055ff Author: Varun Shastry <vshastry@redhat.com> Date: Mon Jun 30 15:36:10 2014 +0530 glusterd: add to the list if the probed uuid pre-exists Signed-off-by: Varun Shastry <vshastry@redhat.com> commit b890625d8164c660695daef3285c67979eef723e Merge: 04c5d60 187a7a9 Author: Kaushal M <kaushal@redhat.com> Date: Mon Jun 30 11:44:13 2014 +0530 Merge remote-tracking branch 'origin/master' into better-peer-identification commit 04c5d60cb938c8d94b214689580b40abb1b0ffcd Merge: 3a5bfa1 e01edb6 Author: Kaushal M <kshlmster@gmail.com> Date: Sat Jun 28 19:23:33 2014 +0530 Merge pull request #3 from vpshastry/better-peer-identification glusterd: search through the list of hostnames in the peerinfo commit 0c64f3346a977f9165ac55a84a1e03c40a7573a7 Merge: e01edb6 3a5bfa1 Author: Varun Shastry <vshastry@redhat.com> Date: Sat Jun 28 10:43:29 2014 +0530 Merge branch 'better-peer-identification' of https://github.com/kshlm/glusterfs into better-peer-identification-kaushal-github commit e01edb63153a1008db70b8fa76ae5b535e099326 Author: Varun Shastry <vshastry@redhat.com> Date: Fri Jun 27 12:29:36 2014 +0530 glusterd: search through the list of hostnames in the peerinfo Signed-off-by: Varun Shastry <vshastry@redhat.com> commit 3a5bfa15855e660db2bfde644727371dd2d618cc Merge: cda6d31 371ea35 Author: Kaushal M <kshlmster@gmail.com> Date: Fri Jun 27 11:31:17 2014 +0530 Merge pull request #1 from vpshastry/better-peer-identification glusterd: Add hostname to list instead of replaceing upon update commit 371ea354f198b4182382d5403c5960c0b2add6b6 Author: Varun Shastry <vshastry@redhat.com> Date: Fri Jun 27 11:24:54 2014 +0530 glusterd: Add hostname to list instead of replaceing upon update Signed-off-by: Varun Shastry <vshastry@redhat.com> commit cda6d3152886623ecbf46baf0048ebe0119b30b6 Author: Kaushal M <kaushal@redhat.com> Date: Thu Jun 26 19:52:52 2014 +0530 Import address lists commit 6649b54aa0440130c08e827e0a1d1bbfb840eca9 Author: Kaushal M <kaushal@redhat.com> Date: Thu Jun 26 19:15:37 2014 +0530 Implement export address list commit 55990034eead92bc9b936240029e460a4bf152d5 Author: Kaushal M <kaushal@redhat.com> Date: Thu Jun 26 18:11:59 2014 +0530 Use first address in list to when setting up the peer RPC. commit a35fde8d19b9988eb04c652fb3a5e4f84d90ad00 Author: Kaushal M <kaushal@redhat.com> Date: Thu Jun 26 18:03:04 2014 +0530 Properly free addresses on glusterd_peer_destroy commit 1988081db09ac9205f3dc7268cef8be267f3ce8b Author: Kaushal M <kaushal@redhat.com> Date: Thu Jun 26 17:52:35 2014 +0530 Restore peerinfo with address list implemented. commit 66f524d5749a12f4910dd6b06c9d91f37e1d831e Author: Kaushal M <kaushal@redhat.com> Date: Mon Jun 23 13:02:23 2014 +0530 Move out all peer related utilities from glusterd-utils to glusterd-peer-utils commit 14a2a326a4dff11b55490dca2a14f39320931340 Author: Kaushal M <kaushal@redhat.com> Date: Tue May 27 12:16:41 2014 +0530 Compilation fix commit c59cd351d0a102d0d5f3ea9001fd33c4edcb262f Author: Kaushal M <kaushal@redhat.com> Date: Mon May 5 12:51:11 2014 +0530 Add store support for hostname list commit b70325f0beb884ad12645ef40185f0bf6cedd741 Author: Kaushal M <kaushal@redhat.com> Date: Fri May 2 15:58:07 2014 +0530 Add a hostnames list to glusterd_peerinfo_t glusterd_peerinfo_new will now init this list and add the given hostname as the lists first member. Signed-off-by: Kaushal M <kaushal@redhat.com> Signed-off-by: Varun Shastry <vshastry@redhat.com> Change-Id: Ief3c5d6d6f16571ee2fab0a45e638b9d6506a06e BUG: 1119547 Reviewed-on: http://review.gluster.org/8238 Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* compress: Change variable nameHumble Chirammal2014-07-151-8/+8
| | | | | | | | | | | | | 'writen' and 'total_writen' variables has been defined in compress xlator. This patch replaced those with proper name. Change-Id: If8e38fae8f997a92686a891d64cbaf6b0b69129a BUG: 1075417 Signed-off-by: Humble Chirammal <hchiramm@redhat.com> Reviewed-on: http://review.gluster.org/8268 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* glusterd: Fix for resource leak coverity bug 1223045.Raghavendra Talur2014-07-141-0/+1
| | | | | | | | | | Change-Id: I96261e7f5cd7b5550d3100750c80190dd932a8ab BUG: 789278 Signed-off-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-on: http://review.gluster.org/8252 Reviewed-by: Avra Sengupta <asengupt@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* gfapi : remove gfapi.py to avoid confusionHumble Chirammal2014-07-142-1/+1
| | | | | | | | | | | | | | | | | | | | python binding of libgfapi is evolving via libgfapi-python project. The example available here confuses end users, so removing it from this path. Signed-off-by: Humble Chirammal <hchiramm@redhat.com> Bug Id: 1119328 > Reviewed-on: http://review.gluster.org/7920 > Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com> > Tested-by: Humble Devassy Chirammal <humble.devassy@gmail.com> > Reviewed-by: Thiago da Silva <thiago@redhat.com> > Reviewed-by: Prashanth Pai <ppai@redhat.com> > Reviewed-by: Vijay Bellur <vbellur@redhat.com> Change-Id: I17b3aa0f0505342496019ce012cca21d84184027 Reviewed-on: http://review.gluster.org/8237 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/afr: Fix dirent leakPranith Kumar K2014-07-141-0/+2
| | | | | | | | | | | | | afr does itransform by taking the list of entries given by client xlator to separate list but doesn't free that list. Change-Id: Ibb4d38b4934b2bb924385c88f9d7942fad933cb9 BUG: 1117243 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/8261 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-by: Ravishankar N <ravishankar@redhat.com>
* changelog: variable 'writen' is changedHumble Chirammal2014-07-144-12/+12
| | | | | | | | | | | | | This patch change the variable name to 'written' in changelog, along with few other typo fixing. Change-Id: I1d3cbea5c89fc0a15233bb6e61b4fbd4bfdd3a67 BUG: 1075417 Signed-off-by: Humble Chirammal <hchiramm@redhat.com> Reviewed-on: http://review.gluster.org/8267 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
generated by cgit (git 2.34.1) at 2024-05-26 08:51:58 +0000