summaryrefslogtreecommitdiffstats
path: root/xlators/performance
Commit message (Collapse)AuthorAgeFilesLines
* __inode_ctx_put: fix mem leak on failurePrasanna Kumar Kalever2016-06-011-1/+6
| | | | | | | | | | | | | | | | | | | up on failure case __inode_ctx_put need to free the allocated memory Indirect leak of 104 byte(s) in 1 object(s) allocated from: #0 0x496669 in __interceptor_calloc (/usr/local/sbin/glusterfsd+0x496669) #1 0x7f8a288522f9 in __gf_calloc libglusterfs/src/mem-pool.c:117 #2 0x7f8a17235962 in __posix_acl_ctx_get xlators/system/posix-acl/src/posix-acl.c:308 Change-Id: I0ce6da3967c55931a70f77d8551ccf52e4cdfda3 BUG: 1338733 Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com> Reviewed-on: http://review.gluster.org/14505 Tested-by: Prasanna Kumar Kalever <pkalever@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* readdir-ahead: Prefetch xattrs needed by md-cachePrashanth Pai2016-05-103-7/+204
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: Negative cache feature implementation in md-cache requires xattrs returned by posix to be intercepted for every call that can possibly return xattrs. This includes readdirp(). This is crucial to treat missing keys in cache as a case of negative entry (returns ENODATA) md-cache puts names of xattrs that it wants to cache in xdata and passes it down to posix which returns the specified xattrs in the callback. This is done in lookup() and readdirp(). Hence, a xattr that is cached can be invalidated during readdirp_cbk too. This is based on the assumption that readdirp() will always return all xattrs that md-cache is interested in. However, this is not the case when readdirp() call is served from readdir-ahead's cache. readdir-ahead xlator will pre-fetch dentries during opendir_cbk and readdirp. These internal readdirp() calls made by readdir-ahead xlator does not set xdata in it's requests. Hence, no xattrs are fetched and stored in it's internal cache. This causes metadata loss in gluster-swift. md-cache returns ENODATA during getxattr() call even though the xattr for that object exists on the brick. On receiving ENODATA, gluster-swift will create new metadata and do setxattr(). This results in loss of information stored in existing xattr. Fix: During opendir, md-cache will communicate to readdir-ahead asking it to store the names of xattrs it's interested in so that readdir-ahead can fetch those in all subsequent internal readdirp() calls issued by it. This stored names of xattrs is invalidated/updated on the next real readdirp() call issued by application. This readdirp() call will have xdata set correctly by md-cache xlator. BUG: 1333023 Change-Id: I32d46f93a99d4ec34c741f3c52b0646d141614f9 Reviewed-on: http://review.gluster.org/14214 Tested-by: Prashanth Pai <ppai@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com>
* performance/write-behind: guaranteed retry after a short writeRaghavendra G2016-05-041-17/+70
| | | | | | | | | | | | | | | | | | * Don't mark the request with a fake EIO after a short write. * retry the remaining buffer at least once before unwinding reply to application. This way we capture correct error from backend (ENOSPC, EDQUOT etc). Thanks to "Vijaikumar Mallikarjuna"<vmallika@redhat.com> for the test script. Change-Id: I73a18b39b661a7424db1a7855a980469a51da8f9 BUG: 1292020 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/13438 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* io-threads: add setactivelk () fopSusant Palai2016-05-011-0/+1
| | | | | | | | | | | Change-Id: I74225a39348f6bb2fbdd1513676a70019227e45f BUG: 1326085 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: http://review.gluster.org/14012 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* io-threads: add getactivelk () fopSusant Palai2016-05-011-0/+1
| | | | | | | | | | | Change-Id: Iaef97ea02dfc54e1a0f23ab972f58b0687b4709c BUG: 1326085 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: http://review.gluster.org/13993 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* performance/decompounder: Introducing decompounder xlatorAnuradha Talur2016-04-257-1/+1085
| | | | | | | | | | | | | | This xlator decompounds the compound fops received, and executes them serially. Change-Id: Ieddcec3c2983dd9ca7919ba9d7ecaa5192a5f489 BUG: 1303829 Signed-off-by: Anuradha Talur <atalur@redhat.com> Reviewed-on: http://review.gluster.org/13577 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* io-threads: Add lease() fopPoornima G2016-04-211-0/+1
| | | | | | | | | | | Change-Id: Ie4921867948d23b8b6c570196e88680cdb5ebfbc BUG: 1319992 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/11599 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra Talur <rtalur@redhat.com>
* md-cache: Cache gluster-swift metadataPrashanth Pai2016-03-161-0/+22
| | | | | | | | | | | | | BUG: 1317785 Change-Id: Ie02b8fc294802f8fdf49dee8bf97f1e6177d92bd Signed-off-by: Prashanth Pai <ppai@redhat.com> Reviewed-on: http://review.gluster.org/13735 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Poornima G <pgurusid@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Gaurav Kumar Garg <ggarg@redhat.com>
* performance/open-behind: Fix fdctx dump NULL dereferencePranith Kumar K2016-02-081-3/+4
| | | | | | | | | | | | | Also printing flags correctly in statedump now Change-Id: Ibfdd74aab5643ecc47d0a88f109d5d1050685f5a BUG: 1294051 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/13076 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* performance/write-behind: fix memory corruptionRaghavendra G2016-01-131-9/+45
| | | | | | | | | | | | | | | | | | | | | 1. while handling short writes, __wb_fulfill_short_write would've freed current request before moving on to next in the list if request is not big enough to accomodate completed number of bytes. So, make sure to save next member before invoking __wb_fulfill_short_write on current request. Also handle the case where request is exactly the size of remaining completed number of bytes. 2. When write request is unwound because there is a conflicting failed liability, make sure its deleted from tempted list. Otherwise there will be two unwinds (one as part handling a failed request in wb_do_winds and another in wb_do_unwinds). Change-Id: Id1b54430796b19b956d24b8d99ab0cdd5140e4f6 BUG: 1297373 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/13213 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra Talur <rtalur@redhat.com>
* performance/write-behind: maintain correct transit size in case ofRaghavendra G2016-01-061-15/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | short writes. 1. Imagine a write when cache is filled with failed syncs. 2. This write won't be unwound since cache size has exceeded configured limit. 3. With trickling-writes on by default, the last write request wont be considered for winding when there is non zero in-transit size. 4. There was a bug in accounting of in-transit size when winds resulted in short writes. Due to this bug, in-transit size used to be non-zero even when there are no syncs in progress. 5. Due to 3 and 4, current write request won't be wound till there is another write or fsync or flush from application. But application can't do any other fop till current write request is unwound. This resulted in deadlock and hence application would be hung in 'D' state. This patch fixes bug in accounting of in-transit size during short writes. Change-Id: I04ce8bb510efaaed7623cac38d69b32dbc3730ce Signed-off-by: Raghavendra G <rgowdapp@redhat.com> BUG: 1279730 Reviewed-on: http://review.gluster.org/13177 Tested-by: Gluster Build System <jenkins@build.gluster.com>
* wb: remove inline keywordRaghavendra Talur2015-12-311-1/+1
| | | | | | | | | | | | | | | When compiled with -Werror flag gcc throws the following error: ‘iov_length’ is static but used in inline function ‘__wb_modify_write_request’ which is not static. Let gcc decide what functions to inline and remove the inline keyword. Change-Id: I6d832596eefcf08306634936e11d2c8d4b8f9ccd BUG: 1279730 Signed-off-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-on: http://review.gluster.org/13113
* build: export minimum symbols from xlators for correct resolutionKaleb S KEITHLEY2015-12-229-9/+9
| | | | | | | | | | | | | | | | | | | | | | Revisiting http://review.gluster.org/#/c/11814/, which unintentionally introduced warnings from libtool about the xlator .so names. According to [1], the -module option must appear in the Makefile.am file(s); if -module is defined in a macro, e.g. in configure(.ac), then libtool will not recognize that this is a module and will emit a warning. [1] http://www.gnu.org/software/automake/manual/automake.html#Libtool-Modules Change-Id: Ifa5f9327d18d139597791c305aa10cc4410fb078 BUG: 1248669 Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/13003 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: soumya k <skoduri@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* performance/write-behind: retry "failed syncs to backend"Raghavendra G2015-12-221-104/+376
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. When sync fails, the cached-write is still preserved unless there is a flush/fsync waiting on it. 2. When a sync fails and there is a flush/fsync waiting on the cached-write, the cache is thrown away and no further retries will be made. In other words flush/fsync act as barriers for all the previous writes. The behaviour of fsync acting as a barrier is controlled by an option (see below for details). All previous writes are either successfully synced to backend or forgotten in case of an error. Without such barrier fop (especially flush which is issued prior to a close), we end up retrying for ever even after fd is closed. 3. If a fop is waiting on cached-write and syncing to backend fails, the waiting fop is failed. 4. sync failures when no fop is waiting are ignored and are not propagated to application. For eg., a. first attempt of sync of a cached-write w1 fails b. second attempt of sync of w1 succeeds If there are no fops dependent on w1 are issued b/w a and b, application won't know about failure encountered in a. 5. The effect of repeated sync failures is that, there will be no cache for future writes and they cannot be written behind. fsync as a barrier and resync of cached writes post fsync failure: ================================================================== Whether to keep retrying failed syncs post fsync is controlled by an option "resync-failed-syncs-after-fsync". By default, this option is set to "off". If sync of "cached-writes issued before fsync" (to backend) fails, this option configures whether to retry syncing them after fsync or forget them. If set to on, cached-writes are retried till a "flush" fop (or a successful sync) on sync failures. fsync itself is failed irrespective of the value of this option, when there is a sync failure of any cached-writes issued before fsync. Change-Id: I6097c9257bfb9ee5b15616fbe6a0576ae9af369a Signed-off-by: Raghavendra G <rgowdapp@redhat.com> BUG: 1279730 Reviewed-on: http://review.gluster.org/12594
* md-cache: Remove readdirp fop for md-cacheMohammed Rafi KC2015-11-091-1/+4
| | | | | | | | | | | | | | | | readdirp call will return inode for each entry and will share this nodeid with kernal, also md-cache will cache this gfid and base name. So when a lookup operation is perfromed on such an inode, md-cache will wind the call, that prevents populating inode ctx for other lower layer xlators. Change-Id: I43c768703a3cc66d05b1c32909d1a2781001cb49 BUG: 1236032 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/11894 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* core: fix Ubuntu code audit (cppcheck) resultsKaleb S. KEITHLEY2015-11-011-1/+1
| | | | | | | | | | | | | | | | | | | This change includes an additional fix (forward port) of a fix made on the release-3.x branches to address a comment made after the original change was merged on the master branch. * release-3.7 * Change-Id: Ie15c5919e5bf9b0a1c66e20dc42d80fdfa8bd7f4 * BZ: 1227808 * http://review.gluster.org/11069 Change-Id: I4fc2672ab1a17998b2e40bc43eb6a3e15058a086 BUG: 1109180 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/11067 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* build: export minimum symbols from xlators for correct resolutionKaleb S. KEITHLEY2015-09-249-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | We've been lucky that we haven't had any symbol collisions until now. Now we have a collision between the snapview-client's svc_lookup() and libntirpc's svc_lookup() with nfs-ganesha's FSAL_GLUSTER and libgfapi. As a short term solution all the snapview-client's FOP methods were changed to static scope. See http://review.gluster.org/11805. This works in snapview-client because all the FOP methods are defined in a single source file. This solution doesn't work for other xlators with FOP methods defined in multiple source files. To address this we link with libtool's '-export-symbols $symbol-file' (a wrapper around `ld --version-script ...` --- on linux anyway) and only export the minimum required symbols from the xlator sharedlib. N.B. the libtool man page says that the symbol file should be named foo.sym, thus the rename of *.exports to *.sym. While foo.exports worked, we will follow the documentation. Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> BUG: 1248669 Change-Id: I1de68b3e3be58ae690d8bfb2168bfc019983627c Reviewed-on: http://review.gluster.org/11814 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: soumya k <skoduri@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* all: reduce "inline" usageJeff Darcy2015-09-011-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | There are three kinds of inline functions: plain inline, extern inline, and static inline. All three have been removed from .c files, except those in "contrib" which aren't our problem. Inlines in .h files, which are overwhelmingly "static inline" already, have generally been left alone. Over time we should be able to "lower" these into .c files, but that has to be done in a case-by-case fashion requiring more manual effort. This part was easy to do automatically without (as far as I can tell) any ill effect. In the process, several pieces of dead code were flagged by the compiler, and were removed. Change-Id: I56a5e614735c9e0a6ee420dab949eac22e25c155 BUG: 1245331 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/11769 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* performance translators : porting the missing gf_log to gf_msgHari Gowtham2015-08-318-11/+71
| | | | | | | | | Change-Id: I5cc2b4669b164fe09637c86da05d2d94589dd7e4 BUG: 1253149 Signed-off-by: Hari Gowtham <hgowtham@redhat.com> Reviewed-on: http://review.gluster.org/11906 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* feature/performace: Fix broken buildKotresh HR2015-06-289-8/+10
| | | | | | | | | | | | Fix the build broken because of patch http://review.gluster.org/#/c/9822/ Change-Id: I0ee502c0fad5be87186c80ab4729036f52f85fa3 BUG: 1194640 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/11451 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Niels de Vos <ndevos@redhat.com>
* features/bit-rot-stub: deny access to bad objectsRaghavendra Bhat2015-06-271-0/+5
| | | | | | | | | | | | | | | | | * Access to bad objects (especially operations such as open, readv, writev) should be denied to prevent applications from getting wrong data. * Do not allow anyone apart from scrubber to set bad object xattr. * Do not allow bad object xattr to be removed. Change-Id: Ia9185a067233a9f26e3d41d41d11d9a4eb0da827 BUG: 1210689 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Signed-off-by: Venky Shankar <vshankar@redhat.com> Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/11126 Tested-by: NetBSD Build System <jenkins@build.gluster.org>
* Logging: Porting the performance translatorarao2015-06-2722-269/+1267
| | | | | | | | | | | | | logs to new logging framework. Change-Id: Ie6aaf8d30bd4457bb73c48e23e6b1dea27598644 BUG: 1194640 Signed-off-by: arao <arao@redhat.com> Reviewed-on: http://review.gluster.org/9822 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com>
* build: do not #include "config.h" in each fileNiels de Vos2015-05-2914-70/+0
| | | | | | | | | | | | | | | | | | Instead of including config.h in each file, and have the additional config.h included from the compiler commandline (-include option). When a .c file tests for a certain #define, and config.h was not included, incorrect assumtions were made. With this change, it can not happen again. BUG: 1222319 Change-Id: I4f9097b8740b81ecfe8b218d52ca50361f74cb64 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/10808 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* quick-read: Do a null check before unrefRavishankar N2015-04-171-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 4ea5b8d2046b9e0bc7f24cdf1b2e72ab8b462c9e seems to have removed the check as a part of static analyis fixes but I'm seeing errors in the client log. -------------------- touch /mnt/fuse_mnt/zero-byte-file echo 3 > /proc/sys/vm/drop_caches cat /mnt/fuse_mnt/zero-byte-file mount log: [2015-04-13 05:52:21.683256] E [iobuf.c:790:iobuf_unref] (--> /usr/local/lib/libglusterfs.so.0(_gf_log_callingfn+0x232)[0x7feda12c0e24] (--> /usr/local/lib/libglusterfs.so.0(iobuf_unref+0x56)[0x7feda1304c8e] (--> /usr/local/lib/glusterfs/3.7dev/xlator/performance/quick-read.so(qr_readv_cached+0x466)[0x7fed95b7e2fc] (--> /usr/local/lib/glusterfs/3.7dev/xlator/performance/quick-read.so(qr_readv+0x70)[0x7fed95b7e385] (--> /usr/local/lib/libglusterfs.so.0(default_readv_resume+0x270)[0x7feda12d4401] ))))) 0-iobuf: invalid argument: iobuf -------------------- Hence re-adding the checks. Note: I'm using the same BZ Id used for the original commit though it is in MODIFIED state just for correlation. Change-Id: I79749814a9d4082933e3b306ce449492ee5b43a5 BUG: 1109180 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/10206 Tested-by: NetBSD Build System Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* performance/md-cache: set right error check in {f}getxattr_cbk()Vijay Bellur2015-04-061-2/+2
| | | | | | | | | | | | | | | Currently mdc_{f}getxattr_cbk() check(s) for a non-zero value to determine if any cache update has to be performed. Right from posix xlator, op_ret has a positive value upon success and -1 upon failure. This patch sets right the check in getxattr callbacks so that xattr cache update happens for successful calls. Change-Id: Ifa5ec38bdf7e3dc095de9a56d91559b13cd9e8b6 BUG: 1208784 Signed-off-by: Vijay Bellur <vbellur@redhat.com> Reviewed-on: http://review.gluster.org/10127 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra Talur <rtalur@redhat.com>
* Avoid conflict between contrib/uuid and system uuidEmmanuel Dreyfus2015-04-042-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | glusterfs relies on Linux uuid implementation, which API is incompatible with most other systems's uuid. As a result, libglusterfs has to embed contrib/uuid, which is the Linux implementation, on non Linux systems. This implementation is incompatible with systtem's built in, but the symbols have the same names. Usually this is not a problem because when we link with -lglusterfs, libc's symbols are trumped. However there is a problem when a program not linked with -lglusterfs will dlopen() glusterfs component. In such a case, libc's uuid implementation is already loaded in the calling program, and it will be used instead of libglusterfs's implementation, causing crashes. A possible workaround is to use pre-load libglusterfs in the calling program (using LD_PRELOAD on NetBSD for instance), but such a mechanism is not portable, nor is it flexible. A much better approach is to rename libglusterfs's uuid_* functions to gf_uuid_* to avoid any possible conflict. This is what this change attempts. BUG: 1206587 Change-Id: I9ccd3e13afed1c7fc18508e92c7beb0f5d49f31a Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/10017 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* symlink-cache: Fixing coverity issuesarao2015-03-301-1/+1
| | | | | | | | | | | | | CID: 1124389 Misspelt variable leading to dead code and memory leak, corrected. Change-Id: I1278f07f81e2db33640e0f289558d919343cb6ce BUG: 789278 Signed-off-by: arao <arao@redhat.com> Reviewed-on: http://review.gluster.org/9694 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* md-cache: cache virtual POSIX ACL xattrsNiels de Vos2015-03-271-0/+12
| | | | | | | | | | | | | | http://review.gluster.org/9627 introduces two new virtual extended attributes that are used similar to the existing POSIX ACL xattrs. These new xattrs should get cached in the same way. BUG: 1185654 Change-Id: I6294b4f9ade887e29f8bd8ae5a3642891df8a631 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9947 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* every/where: add GF_FOP_IPC for inter-translator communicationJeff Darcy2015-03-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Several features - e.g. encryption, erasure codes, or NSR - involve multiple cooperating translators which sometimes need a "private" means of communication amongst themselves. Historically we've used virtual or synthetic xattrs, but that's not very elegant and clutters up the getxattr/setxattr path which must also handle real xattr requests. This new fop should address that. The only argument is an int32_t "op" which should be recognized by the target translator. It is recommended that translators using these feature follow some convention regarding the ops that they define, to avoid conflicts. Using a hash of the target translator's type string as a base for a series of ops would probably be a good start. Any other information can be passed in both directions using xdata. The default behavior for this fop, as with any other, is to pass through to FIRST_CHILD. That makes use of this fop "transparent" to other translators that were written before it existed, but it also means that it only really works with pass-through translators. If a routing translator (such as DHT) or a fan-out translator (such as AFR) is involved, the IPC might not reach its intended destination unless those translators are modified to forward IPC fops along all paths. If an IPC gets all the way to storage/posix it is considered an error, much like an uncaught exception. We don't actually *do* anything in that case, but we do log it send back an EOPNOTSUPP error. This makes the "unrecognized opcode" condition distinguishable from the "no IPC support" condition (which would yield an RPC error instead) so clients can probe for the presence of a handler for their own favorite opcode and either use that or use old-school xattrs depending on the result. BUG: 1158628 Signed-off-by: Venky Shankar <vshankar@redhat.com> Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Change-Id: I84af1b17babe5b30ec03ecf027ae37d09b873968 Reviewed-on: http://review.gluster.org/8812 Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Performance: Replace ASSERTS in xlator fini() with info messages, for the ↵Poornima G2015-03-102-1/+15
| | | | | | | | | | | | | | | | | known leaks. There are few known leaks in read-ahead and quick-read xlator fini(). Until they are fixed replacing the ASSERTS with info, else any call to glfs_fini() in debug mode will core dump. Change-Id: Id60c6f952574863fc77c7d101cb5d5e9113090d8 BUG: 1199436 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/9819 Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-by: Ravishankar N <ravishankar@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com>
* glfs_fini: Clean up all the resources allocated in glfs_new.Poornima G2015-03-041-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Initially even after calling glfs_fini(), all the threads created during init and many other resources like memory pool, iobuf pool, event pool and other memory allocs were not being freed. With this patch these resources are freed in glfs_fini(). The two thumb rules followed in this patch are: - The threads are not killed, they are made to exit voluntarily, once the queued tasks are completed. The main thread waits for the other threads to exit. - Free the memory pools and destroy the graphs only after all the other threads are stopped, so that there are less chances of hitting access after free. Resources freed and its order: 1. Destroy the inode table of all the graphs - Call forget on all the inodes. This will not be required when the cleanup during graph switch is implemented to perform inode table destroy. 2. Deactivate the current graph, call fini of all the xlators. 3. Syncenv destroy - Join the synctask threads and cleanup syncenv resources Sets the destroy mode, complete the existing synctasks, then join the synctask threads. After entering the destroy mode, -if a new synctask is submitted, it fails. -if syncenv_new() is called, it will end up creating new threads, but this is called only during init. 4. Poller thread destroy Register an event handler which sets the destroy mode for the poller. Once the poller is done processing all the events, it exits. 5. Tear down the logging framework The log file is closed and the log level is set to none, after this point no log messages appear either in log file or in stderr. 6. Destroy the timer thread Set the destroy bit, once the pending timer events are processed the timer thread exits. Note: Log infrastructure should be shutdown before destroying the timer thread as gf_log uses timers. 7. Destroy the glusterfs_ctx_t For all the graphs(active and passive), free graph, xlator structs and few other lists. Free the memory pools - iobuf pool, event pool, dict, logbuf pool, stub mem pool, stack mem pool, frame mem pool. Few things not addressed in this patch: 1. rpc_transport object not destroyed, the PARENT_DOWN should have destroyed this object but has not, needs to be addressed as a part of different patch 2. Each xlator fini should clean up the local pool allocated by its xlator. Needs to be addresses as a part of different patch. 3. Each xlator should implement forget to free its inode_ctx. Needs to be addresses as a part of different patch. 3. Few other leaks reported by valgrind. 4. fd and fd contexts The numbers: The resource usage by the test case in this patch: Without the fix, Memory: ~3GB; Threads: ~81 With this fix, Memory: 300MB; Threads: 1(main thread) Change-Id: I96b9277541737aa8372b4e6c9eed380cb871e7c2 BUG: 1093594 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/7642 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* performance/md-cache: Initialise local->loc before winding nameless lookupKrutika Dhananjay2015-01-231-3/+3
| | | | | | | | | | | | That way, in the cbk, the latest values are updated in the cache. Change-Id: Ia149e352e4763e8f5b910a3f4cb64d2dda4534b1 BUG: 1179169 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/9476 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com>
* build: Remove files completely in make uninstall.Raghavendra Talur2015-01-011-0/+3
| | | | | | | | | | | | If we create symlinks are part of make install, should remove them as part of make uninstall. Change-Id: Ie6e641caed60104cd256de4f020c1c6743d4ae60 BUG: 1177767 Signed-off-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-on: http://review.gluster.org/9367 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* performance/readdir-ahead: indicate EOF for readdirpRaghavendra Bhat2014-12-171-2/+9
| | | | | | | | | | | | | | | | | | posix xlator sends op_errno as ENOENT and op_ret as 0, to indicate readdir has been completed. readdir-ahead should send that op_errno that it has saved in the fd context, when it serves the readdir requests. Otherwise some xlators sitting above performance xlators such as snapview-client, which checks for end of readdir operation by checking op_ret to 0 and op_errno to ENOENT will not be able to identify end of readdir. Change-Id: Ib0835136c61cb1e0d7df933226c479c7db703a71 BUG: 1174783 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/9283 Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* core: fix Ubuntu code audit (cppcheck) resultsKaleb S. KEITHLEY2014-11-251-8/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | See also http://review.gluster.org/#/c/7693/, BZ 1091677 AFAICT these are false positives: [geo-replication/src/gsyncd.c:100]: (error) Memory leak: str [geo-replication/src/gsyncd.c:403]: (error) Memory leak: argv [xlators/nfs/server/src/nlm4.c:1201]: (error) Possible null pointer dereference: fde [xlators/cluster/afr/src/afr-self-heal-common.c:138]: (error) Possible null pointer dereference: __ptr [xlators/cluster/afr/src/afr-self-heal-common.c:140]: (error) Possible null pointer dereference: __ptr [xlators/cluster/afr/src/afr-self-heal-common.c:331]: (error) Possible null pointer dereference: __ptr Test program: [extras/test/test-ffop.c:27]: (error) Buffer overrun possible for long command line arguments. [tests/basic/fops-sanity.c:55]: (error) Buffer overrun possible for long command line arguments. the remainder are fixed with this change-set: [cli/src/cli-rpc-ops.c:8883]: (error) Possible null pointer dereference: local [cli/src/cli-rpc-ops.c:8886]: (error) Possible null pointer dereference: local [contrib/uuid/gen_uuid.c:369]: (warning) %ld in format string (no. 2) requires 'long *' but the argument type is 'unsigned long *'. [contrib/uuid/gen_uuid.c:369]: (warning) %ld in format string (no. 3) requires 'long *' but the argument type is 'unsigned long *'. [xlators/cluster/dht/src/dht-rebalance.c:1734]: (error) Possible null pointer dereference: ctx [xlators/cluster/stripe/src/stripe.c:4940]: (error) Possible null pointer dereference: local [xlators/mgmt/glusterd/src/glusterd-geo-rep.c:1718]: (error) Possible null pointer dereference: command [xlators/mgmt/glusterd/src/glusterd-replace-brick.c:942]: (error) Resource leak: file [xlators/mgmt/glusterd/src/glusterd-replace-brick.c:1026]: (error) Resource leak: file [xlators/mgmt/glusterd/src/glusterd-sm.c:249]: (error) Possible null pointer dereference: new_ev_ctx [xlators/mgmt/glusterd/src/glusterd-snapshot.c:6917]: (error) Possible null pointer dereference: volinfo [xlators/mgmt/glusterd/src/glusterd-utils.c:4517]: (error) Possible null pointer dereference: this [xlators/mgmt/glusterd/src/glusterd-utils.c:6662]: (error) Possible null pointer dereference: this [xlators/mgmt/glusterd/src/glusterd-utils.c:7708]: (error) Possible null pointer dereference: this [xlators/mount/fuse/src/fuse-bridge.c:4687]: (error) Uninitialized variable: finh [xlators/mount/fuse/src/fuse-bridge.c:3080]: (error) Possible null pointer dereference: state [xlators/nfs/server/src/nfs-common.c:89]: (error) Dangerous usage of 'volname' (strncpy doesn't always null-terminate it). [xlators/performance/quick-read/src/quick-read.c:586]: (error) Possible null pointer dereference: iobuf Rerunning cppcheck after fixing the above: As before, test program: [extras/test/test-ffop.c:27]: (error) Buffer overrun possible for long command line arguments. [tests/basic/fops-sanity.c:55]: (error) Buffer overrun possible for long command line arguments. As before, false positive: [geo-replication/src/gsyncd.c:100]: (error) Memory leak: str [geo-replication/src/gsyncd.c:403]: (error) Memory leak: argv [xlators/nfs/server/src/nlm4.c:1201]: (error) Possible null pointer dereference: fde [xlators/cluster/afr/src/afr-self-heal-common.c:138]: (error) Possible null pointer dereference: __ptr [xlators/cluster/afr/src/afr-self-heal-common.c:140]: (error) Possible null pointer dereference: __ptr [xlators/cluster/afr/src/afr-self-heal-common.c:331]: (error) Possible null pointer dereference: __ptr False positive after fix: [xlators/performance/quick-read/src/quick-read.c:584]: (error) Possible null pointer dereference: iobuf Change-Id: I20e0e3ac1d600b2f2120b8d8536cd6d9e17023e8 BUG: 1109180 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/8064 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* md-cache: check mtime_nsec and ctime_nsec fields for changes tooNiels de Vos2014-11-191-2/+6
| | | | | | | | | | | | | | | | | When md-cache checks for an updated mtime/ctime in order to see if it should request a cache invalidation, it only looks at the whole-second "mtime" and "ctime" fields. If a file was modified a fraction of a second after the time of the cached data, md-cache won't notice the change. BUG: 1164506 Change-Id: Ieb7baa46f84489d2d7ea8d60a7fb2595564eb955 Original-author: Philip Spencer <pspencer@fields.utoronto.ca> Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9131 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Xavier Hernandez <xhernandez@datalab.es> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* md-cache: cache the iatt when readv() was successfulNiels de Vos2014-11-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | When md-cache is handling a readv callback, its logic is to skip checking the file's iatt (to see if it has changed since the time of the last cache) if "op_ret != 0". This is a mistake, and the intent was to skip only on error; for other fops, op_ret is 0 on success and nonzero on error, and md-cache has the same code for them. For readv, though, op_ret is the number of bytes read, so it will normally be positive except on EOF. BUG: 1164503 Change-Id: Ifc0f2084b41b6f8d075a9260dc7cf69e97535eed Original-author: Philip Spencer <pspencer@fields.utoronto.ca> Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9129 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Xavier Hernandez <xhernandez@datalab.es> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* performance/io-threads: Fix static analysis errorPranith Kumar K2014-10-201-4/+2
| | | | | | | | | | | | | stub->fop can be more than FOP_MAX is what static analysis is complaining. This patch doesn't allow any 'log' to be printed in the case fop value is not in the definied range. It gives EINVAL instead. Change-Id: I293381e2c1ad0ab45154b0192a637612becaf744 BUG: 1153935 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/8939 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* make snapview-server more compatible with NFS serverRaghavendra Bhat2014-07-161-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * There was no handle based API for listxattr. With this change, glfs_h_getxattrs also handles the listxattr functionality by checking whether the name is NULL or not (like posix). But all the gfapi functions for listxattr (glfs_h_getxattrs AND glfs_listxattr AND glfs_flistxattr) returns the names of the xattrs in a buffer provided by the caller. But snapview-server has to return the list of xattrs in a dict itself (similar to posix xlator). But the buffer just contains the names of the xattrs. So for each xattr, a zero byte value is set (i.e. "") into the dict and sent back. Translators which do xattr caching (as of now md-cache which caches selinux and acl related xattrs) should not cache those xattrs whose value is a zero byte data (""). So made changes in md-cache to ignore zero byte values. * NFS server was not linking the inodes to inode table in readdirp. This was leading to applications getting errors. The below set of operations would lead to applications getting error 1) ls -l in one of the snaopshots (snapview-server would generate gfids for each entry on the fly and link the inodes associated with those entries) 2) NFS server upon getting readdirp reply would not link the inodes of the entries. But it used to generate filehandles for each entry and associate the gfid of that entry with the filehandle and send it as part of the reply to nfs client. 3) NFS client would send the filehandle of one of those entries when some activity is done on it. 4) NFS server would not be able to find the inode for the gfid present in the filehandle (as the inode was not linked) and would go for hard resolution by sending a lookup on the gfid by creating a new inode. 5) snapview-client will not able to identify whether the inode is a real inode existing in the main volume or a virtual inode existing in the snapshots as there would not be any inode context. 6) Since the gfid upon which lookup is sent is a virtual gfid which is not present in the disk, lookup would fail and the application would get an error. To handle above situation, now nfs server also does inode linking in readdirp. Change-Id: Ibb191408347b6b5f21cff72319ccee619ea77bcd BUG: 1115949 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/8230 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* porting: Port for FreeBSD rebased from Mike Ma's effortsHarshavardhana2014-07-021-0/+1
| | | | | | | | | | | | | | | | | | | - Provides a working Gluster Management Daemon, CLI - Provides a working GlusterFS server, GlusterNFS server - Provides a working GlusterFS client - execinfo port from FreeBSD is moved into ./contrib/libexecinfo for ease of portability on NetBSD. (FreeBSD 10 and OSX provide execinfo natively) - More portability cleanups for Darwin, FreeBSD and NetBSD - Provides a new rc script for FreeBSD Change-Id: I8dff336f97479ca5a7f9b8c6b730051c0f8ac46f BUG: 1111774 Original-Author: Mike Ma <mikemandarine@gmail.com> Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/8141 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* performance/md-cache: Guard against null dictPranith Kumar K2014-07-011-1/+1
| | | | | | | | | BUG: 1114677 Change-Id: Ica4f4ad97d7d1edc3e48e7f1a6ec70b14acffc66 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/8205 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* build: MacOSX Porting fixesHarshavardhana2014-04-245-19/+25
| | | | | | | | | | | | | | | | | | | | | git@forge.gluster.org:~schafdog/glusterfs-core/osx-glusterfs Working functionality on MacOSX - GlusterD (management daemon) - GlusterCLI (management cli) - GlusterFS FUSE (using OSXFUSE) - GlusterNFS (without NLM - issues with rpc.statd) Change-Id: I20193d3f8904388e47344e523b3787dbeab044ac BUG: 1089172 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Signed-off-by: Dennis Schafroth <dennis@schafroth.com> Tested-by: Harshavardhana <harsha@harshavardhana.net> Tested-by: Dennis Schafroth <dennis@schafroth.com> Reviewed-on: http://review.gluster.org/7503 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* build: do not create versioned <xlator>.so filesNiels de Vos2014-03-211-1/+1
| | | | | | | | | | | | | | | | | | There has been a misspelled option in the Makefile.am files. The option is called -avoid-version, and not -avoidversion. It is not trivial to provide a test-case for this. One way would be to check generated RPMs with a command like this (output should be empty): $ rpm -qlp *.rpm | grep -E '/xlator/.+.so.0' Change-Id: I2a6cc557eada4d098b73af5a254f8c75707543da BUG: 1078365 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/7299 Reviewed-by: Lalatendu Mohanty <lmohanty@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* write-behind: track filesize when doing extending writesNiels de Vos2014-02-271-4/+161
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A program that calls mmap() on a newly created sparse file, may receive a SIGBUS signal. If SIGBUS is not handled, a segmentation fault will occur and the program will exit. A bug in the write-behind translator can cause the creation of a sparse file created with open(), seek(), write() to be cached. The last write() may not be sent to the server, until write-behind deems this necessary. * open(.., O_TRUNC, ...)/creat() the file, it is 0 bytes big * seek() into the file, use offset 31 * write() 1 byte to the file * the range from byte 0-30 are unwritten so called 'sparse' The following illustration tries to capture this: Legend: [ = start of file _ = unallocated/unwritten bytes # = allocated bytes in the file ] = end of file [_______________#] | | '- byte 0 '- byte 31 Without this change, reading from byte 0-30 will return an error, and reading the same area through an mmap()'d pointer will trigger a SIGBUS. Reading from this range did not trigger the outstanding write() to be flushed. The brick that receives the read() (translated over the network from mmap()) does not know that the file has been extended, and returns -EINVAL. This error gets transported back from the brick to the glusterfs-fuse client, and translated by the Linux kernel/VFS into SIGBUS triggered by mmap(). In order to solve this, a new attribute to the wb_inode structure is introduced; the current size of the file. All FOPs that can modify the size, are expected to update wb_inode->size. This makes it possible for extending writes with an offset bigger than EOF to mark the unwritten area as modified/pending. Change-Id: If5ba6646732e6be26568541ea9b12852a5d0b988 BUG: 1058663 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/6835 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* performance/io-threads: Remove code duplicationPranith Kumar K2014-02-241-1896/+78
| | | | | | | | | Change-Id: Ic905cc6074c796efce2972857b79ab53700a2de4 BUG: 1065657 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/7010 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* io-cache: Unlock and then goto out in failure case.Raghavendra Talur2014-02-171-0/+1
| | | | | | | | | | | Fix for coverity bug CID:1124625 Change-Id: I76df453a17f2af7c48a80b6fc0ccd411ab96e371 BUG: 789278 Signed-off-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-on: http://review.gluster.org/6949 Reviewed-by: Santosh Pradhan <spradhan@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* performance/io-cache: Fix dereferencing of freed pointerPoornima2014-02-121-2/+6
| | | | | | | | | Change-Id: Ic4276c6d76c36f4eb77282dc06d2b8b212b58f08 BUG: 789278 Signed-off-by: Poornima <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/6822 Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* protocol/server: do not do root-squashing for trusted clientsRaghavendra Bhat2014-02-101-2/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * As of now clients mounting within the storage pool using that machine's ip/hostname are trusted clients (i.e clients local to the glusterd). * Be careful when the request itself comes in as nfsnobody (ex: posix tests). So move the squashing part to protocol/server when it creates a new frame for the request, instead of auth part of rpc layer. * For nfs servers do root-squashing without checking if it is trusted client, as all the nfs servers would be running within the storage pool, hence will be trusted clients for the bricks. * Provide one more option for mounting which actually says root-squash should/should not happen. This value is given priority only for the trusted clients. For non trusted clients, the volume option takes the priority. But for trusted clients if root-squash should not happen, then they have to be mounted with root-squash=no option. (This is done because by default blocking root-squashing for the trusted clients will cause problems for smb and UFO clients for which the requests have to be squashed if the option is enabled). * For geo-replication and defrag clients do not do root-squashing. * Introduce a new option in open-behind for doing read after successful open. Change-Id: I8a8359840313dffc34824f3ea80a9c48375067f0 BUG: 954057 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/4863 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* performance/io-cache: Fix for the bugs reported by coverityPoornima2014-02-101-0/+2
| | | | | | | | | | Change-Id: I24c10d874511a2f24dda2fb84d31f5074da1616f BUG: 789278 Signed-off-by: Poornima <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/6869 Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* performance/quick-read: Allocated memory not freed when not used.Christopher R. Hertel2014-02-081-2/+3
| | | | | | | | | | | | | | | If memory is successfully allocated in the call to qr_content_extract(), but is not used, it is not being freed. This patch frees the allocated memory if it is not passed to qr_content_refresh(). BUG: 789278 CID: 1124735 Change-Id: I1c1f03a3b92fa26321ec6ee8822e6fa41da79875 Signed-off-by: Christopher R. Hertel <crh@redhat.com> Reviewed-on: http://review.gluster.org/6827 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
generated by cgit (git 2.34.1) at 2024-05-13 19:25:32 +0000