summaryrefslogtreecommitdiffstats
path: root/xlators/mgmt
Commit message (Collapse)AuthorAgeFilesLines
* glusterd: Get maximum supported op-version in a clusterSamikshan Bairagya2017-01-0810-29/+198
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | gluster volume get <VOLNAME> cluster.opversion gives us the current op-version on which the cluster is operating. There is no command that lets the user know the maximum supported op-version that the cluster can run on. This patch adds a new global option cluster.max-op-version, that can be used to retrieve the maximum supported op-version in a cluster. Usage: # gluster volume get all cluster.max-op-version Example output: Option Value ------ ----- cluster.max-op-version 30900 NOTE: The only way to test this feature for now is to set the GD_OP_VERSION_MAX macro to different values (30800 for 3.8,30900 for 3.9, and so on) and rebuild glusterd. Since the regression test framework currently doesn't have support to simulate these tests, there are no accompanying regression tests for this feature. It should be possible to add tests once glusto comes in and makes it easier to run a heterogeneous cluster. Change-Id: I547480ee5e7912664784643e436feb198b6d16d0 BUG: 1365822 Signed-off-by: Samikshan Bairagya <samikshan@gmail.com> Reviewed-on: http://review.gluster.org/16283 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd: Fail add-brick on replica count change, if brick is downkarthik-us2017-01-061-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: 1. Have a replica 2 volume with bricks b1 and b2 2. Before setting the layout, b1 goes down 3. Set the layout write some data, which gets populated on b2 4. b2 goes down then b1 comes up 5. Add another brick b3, and heal will take place from b1 to b3, which basically have no data 6. Write some data. Both b1 and b3 will mark b2 for pending writes 7. b1 goes down, and b2 comes up 8. b2 gets heald from b1. During heal it removes the data which is already in b2, considering that as stale data. This leads to data loss. Solution: 1. In glusterd stage-op, while adding bricks, check whether the replica count is being increased 2. If yes, then check whether any of the bricks are down at that time 3. If yes, then fail the add-brick to avoid such data loss 4. Else continue the normal operation. This check will work enen when we convert plain distribute volume to replicate Test: 1. Create a replica 2 volume 2. Kill one brick from the volume 3. Try adding a brick to the volume 4. It should fail with all bricks are not up error 5. Cretae a distribute volume and kill one of the brick 6. Try to convert it to replicate volume, by adding bricks. 7. This should also fail. Change-Id: I9c8d2ab104263e4206814c94c19212ab914ed07c BUG: 1406411 Signed-off-by: karthik-us <ksubrahm@redhat.com> Reviewed-on: http://review.gluster.org/16330 Tested-by: Ravishankar N <ravishankar@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: N Balachandran <nbalacha@redhat.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd, cli: Get global options through volume get functionalitySamikshan Bairagya2016-12-305-29/+201
| | | | | | | | | | | | | | | | | | | | | | | | | | Currently it is not possible to retrieve values of global options by using the 'gluster volume get' functionality if there are no volumes present. In order to get the global options one has to use 'gluster volume get' with a specific volume name. This usage makes the illusion as though the option is set only on one volume, which is incorrect. When setting the global options, 'gluster volume set' provides a way to set them using the volume name as 'all'. Similarly, retrieving the global options should be made possible by using the volume name 'all' with the 'gluster volume get' functionality. This patch adds that functionality to 'volume get' Usage: # gluster volume get all <OPTION/all> Change-Id: Ic2fdb9eda69d4806d432dae26d117d9660fe6d4e BUG: 1378842 Signed-off-by: Samikshan Bairagya <samikshan@gmail.com> Reviewed-on: http://review.gluster.org/15563 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* performance/readdir-ahead: mark two options as NO_DOCRaghavendra G2016-12-271-2/+2
| | | | | | | | | | | | | | | The two options are rda-high-wmark and rda-low-wmark. The impact of these two options is yet to be fully understood and hence not advertising these options to not run into surprises. Change-Id: Ia537f4cc342011f0f2f3849ad6b938e247e5622d BUG: 1356960 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/16297 Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* glusterd/geo-rep: Fix geo-rep config issueKotresh HR2016-12-261-14/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | Problem: Geo-replication config commands fail when geo-rep status is in 'Created'. Cause: During staging phase of geo-rep config, it checks for the existence of 'monitor.pid' file. But the pid file gets created only on start of geo-rep. Hence it fails. Fix: Do not check for the existence of pid-file during staging for config commands. It is not required. Change-Id: I626d368b249cf0423c7f49b4284465508371f566 BUG: 1404678 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/16132 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Aravinda VK <avishwan@redhat.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* performance/readdir-ahead: limit cache sizeRaghavendra G2016-12-221-1/+26
| | | | | | | | | | | | | | | | This patch introduces a new option called "rda-cache-limit", which is the maximum value the entire readdir-ahead cache can grow into. Since, readdir-ahead holds a reference to inode through dentries, this patch also accounts memory stored by various xlators in inode contexts. Change-Id: I84cc0ca812f35e0f9041f8cc71effae53a9e7f99 BUG: 1356960 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/16137 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Poornima G <pgurusid@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* socket: socket disconnect should wait for poller thread exitRajesh Joseph2016-12-212-4/+6
| | | | | | | | | | | | | | | | | | | | | When SSL is enabled or if "transport.socket.own-thread" option is set then socket_poller is run as different thread. Currently during disconnect or PARENT_DOWN scenario we don't wait for this thread to terminate. PARENT_DOWN will disconnect the socket layer and cleanup resources used by socket_poller. Therefore before disconnect we should wait for poller thread to exit. Change-Id: I71f984b47d260ffd979102f180a99a0bed29f0d6 BUG: 1404181 Signed-off-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-on: http://review.gluster.org/16141 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kaushal M <kaushal@redhat.com> Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* snapshot: Fix restore rollback to reassign snap volume ids to bricksAvra Sengupta2016-12-166-1/+158
| | | | | | | | | | | | | | | | | | | | Added further checks to ensure we do not go beyond prevalidate when trying to restore a snapshot which has a nfs-gansha conf file, in a cluster when nfs-ganesha is not enabled The error message for the particular scenario is: "Snapshot(<snapname>) has a nfs-ganesha export conf file. cluster.enable-shared-storage and nfs-ganesha should be enabled before restoring this snapshot." Change-Id: I1b87e9907e0a5e162f26ef1ca89fe76e8da8610f BUG: 1404118 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/16116 Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* glusterd: Handle volinfo->refcnt properly during volume start commandAvra Sengupta2016-12-121-10/+10
| | | | | | | | | | | | | | | | | | While running the volume start command, the refcnt of the volume is incremented. At the end of the command, the refcnt should also be decremented. This is currently not the case. This patch, makes sure the refcnt is also decremented at the end of the volume start command. Change-Id: I017b5039be5948df41dde6bc89d2955d5d18971f BUG: 1403780 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/16108 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* snapshot/ganesha: Copy export.conf, only if ganesha.enable is on.Avra Sengupta2016-12-121-13/+25
| | | | | | | | | | | | | | | | Status of the volume being exported via nfs ganesha, should be checked by checking if ganesha.enable is set or not, rather than deciding based on the errno of the stat Change-Id: Iaff786d9f77a2de1322ce8ccb4b80954f84d3373 BUG: 1402828 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/16094 CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: jiffin tony Thottan <jthottan@redhat.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* glusterd/geo-rep: Fix glusterd crashKotresh HR2016-12-082-3/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: glusterd crashes when geo-rep mountbroker setup is created if the slave user length is more than 8 characters. Cause: _POSIX_LOGIN_NAME_MAX is used which is 9 including NULL byte. Analysis: While the man page says it sufficient for portability, but acutally it's not. Linux allows the creation of username upto 32 characters by default where the max length is 256. And NetBSD's max is 17. Linux: #getconf LOGIN_NAME_MAX 256 NetBSD: #getconf LOGIN_NAME_MAX 17 Fix: Use LOGIN_NAME_MAX instead of _POSIX_LOGIN_NAME_MAX Change-Id: I26b7230433ecbbed6e6914ed39221a478c0266a8 BUG: 1368138 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/16053 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Aravinda VK <avishwan@redhat.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* geo-rep: Do not restart workers when log-rsync-performance config changeAravinda VK2016-12-071-0/+2
| | | | | | | | | | | | | | | | | | Geo-rep restarts workers when any of the configurations changed. We don't need to restart workers if tunables like log-rsync-performance is modified. With this patch, Geo-rep workers will get new "log-rsync-performance" config automatically without restart. BUG: 1393678 Change-Id: I40ec253892ea7e70c727fa5d3c540a11e891897b Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/15816 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kotresh HR <khiremat@redhat.com>
* glusterd/ganesha : handle volume reset properly for ganesha optionsJiffin Tony Thottan2016-12-063-34/+31
| | | | | | | | | | | | | | | | | The "gluster volume reset" should first unexport the volume and then delete export configuration file. Also reset option is not applicable for ganesha.enable if volume value is "all". This patch also changes the name of create_export_config into manange_export_config Change-Id: Ie81a49e7d3e39a88bca9fbae5002bfda5cab34af BUG: 1397795 Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> Reviewed-on: http://review.gluster.org/15914 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: soumya k <skoduri@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* glusterd : coverity fix for string overflowMuthu-vigneshwaran2016-12-062-3/+5
| | | | | | | | | | | | | | | | CID : 1357872, 1357873, 1351695 BUG: 789278 Change-Id: I2ee01a6054326f35de621ee7a1f2afd09c5738fe Signed-off-by: Muthu-vigneshwaran <mvignesh@redhat.com> Reviewed-on: http://review.gluster.org/15989 Tested-by: Muthu Vigneshwaran Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Manikandan Selvaganesh <manikandancs333@gmail.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* cluster/tier: fix op-version for tier-query-limitMilind Changire2016-12-011-1/+1
| | | | | | | | | | | | | | Correct the op-version for tier-query-limit option from 3.9.0 to 3.9.1 Change-Id: I3a52a94c2708a97c18377e945d559a51d8025c41 BUG: 1366648 Signed-off-by: Milind Changire <mchangir@redhat.com> Reviewed-on: http://review.gluster.org/15990 Reviewed-by: Dan Lambright <dlambrig@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd, cli: Fix volume options output format in get-state cliSamikshan Bairagya2016-12-011-4/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the get-state cli outputs the volume options in the following format: Volume1.rebalance.skipped: 0 Volume1.rebalance.lookedup: 0 Volume1.rebalance.files: 0 Volume1.rebalance.data: 0Bytes [Volume1.options] features.barrier: on transport.address-family: inet performance.readdir-ahead: on nfs.disable: on Volume2.name: tv2 Volume2.id: 35854708-bb72-45a5-bdbd-77c51e5ebfb9 Volume2.type: Distribute This above format is a valid ini file format syntactically, but is not very easily parseable. This patch changes the format to look like the following and should be more easily parseable: Volume1.rebalance.skipped: 0 Volume1.rebalance.lookedup: 0 Volume1.rebalance.files: 0 Volume1.rebalance.data: 0Bytes Volume1.options.features.barrier: on Volume1.options.transport.address-family: inet Volume1.options.performance.readdir-ahead: on Volume1.options.nfs.disable: on Volume2.name: tv2 Volume2.id: 35854708-bb72-45a5-bdbd-77c51e5ebfb9 Volume2.type: Distribute Change-Id: I9768b45de288d9817ec669d3a801874eb1914750 BUG: 1399995 Signed-off-by: Samikshan Bairagya <samikshan@gmail.com> Reviewed-on: http://review.gluster.org/15975 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Shubhendu Tripathi <shtripat@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* uss: snapd should enable SSL if SSL is enabled on volumeRajesh Joseph2016-12-011-0/+15
| | | | | | | | | | | | | | | | During snapd graph generation we should check if SSL is enabled on main volume or not. This is because clients will communicate with snapd as if it is communicating to a brick. Change-Id: I0d7fe86c567b297a8528a48faf06161d4c3cb415 Signed-off-by: Rajesh Joseph <rjoseph@redhat.com> BUG: 1400013 Reviewed-on: http://review.gluster.org/15979 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kaushal M <kaushal@redhat.com>
* glusterd: Remove duplicate values for glusterd message macrosSamikshan Bairagya2016-11-301-5/+6
| | | | | | | | | | | | | | | Both GD_MSG_BRICK_CLEANUP_SUCCESS and GD_MSG_DAEMON_STATE_REQ_RCVD macros are assigned the same value (GLUSTERD_COMP_BASE + 584). Also the number of messages should be 588 instead of 587 Change-Id: I015d32435c05ded1b14cd8ba11911af826bc956b BUG: 1400026 Signed-off-by: Samikshan Bairagya <samikshan@gmail.com> Reviewed-on: http://review.gluster.org/15980 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* cluster/afr: CLI for granular entry heal enablement/disablementKrutika Dhananjay2016-11-282-15/+65
| | | | | | | | | | | | | | | | | | | | | | | | | | | | When there are already existing non-granular indices created that are yet to be healed, if granular-entry-heal option is toggled from 'off' to 'on', AFR self-heal whenever it kicks in, will try to look for granular indices in 'entry-changes'. Because of the absence of name indices, granular entry healing logic will fail to heal these directories, and worse yet unset pending extended attributes with the assumption that are no entries that need heal. To get around this, a new CLI is introduced which will invoke glfsheal program to figure whether at the time an attempt is made to enable granular entry heal, there are pending heals on the volume OR there are one or more bricks that are down. If either of them is true, the command will be failed with the appropriate error. New CLI: gluster volume heal <VOL> granular-entry-heal {enable,disable} Change-Id: I1f4fe8162813b9068e198965d94169fee4adc099 BUG: 1370410 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/15747 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd: fix few events generationAtin Mukherjee2016-11-235-7/+17
| | | | | | | | | | | | | | | | | | | | | This patch does the following: 1. Generate PEER_REJECT event if the peer add request is from an unknown peer during peer handshaking. 2. EVENT_COMPARE_FRIEND_VOLUME_FAILED should be generated based on status code, not ret. 3. Add EVENT_BRICKPATH_RESOLVE_FAILED event in case glusterd fails to resolve bricks, this is mainly at restore path. 4. Remove EVENT_BRICKS_START_FAILED event as we already have EVENT_BRICK_START_FAILED Change-Id: I90e5bc4a331166d0bb3554eb2ec9df2526837a1d BUG: 1397424 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/15903 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Samikshan Bairagya <samikshan@gmail.com>
* glusterd: dump volinfo->dict in gluster get-stateAtin Mukherjee2016-11-221-2/+6
| | | | | | | | | | | | Change-Id: I7e60629fb8003c620847fa63441f6b098db59721 BUG: 1396807 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/15889 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Samikshan Bairagya <samikshan@gmail.com> Reviewed-by: Rohan Kanade <rkanade@redhat.com>
* events: Add FMT_WARN for gf_eventPranith Kumar K2016-11-182-13/+13
| | | | | | | | | | | | | | | | | Raghavendra G found that posix is trying to print %s but passing an int when HEALTH_CHECK fails in posix. These are the kind of bugs that should be caught at compilation itself. Also fixed the problematic gf_event() callers. BUG: 1386097 Change-Id: Id7bd6d9a9690237cec3ca1aefa2aac085e8a1270 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/15671 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* cli/rebalance: remove brick status is incorrectN Balachandran2016-11-171-0/+3
| | | | | | | | | | | | | | | | | | | | | | If a remove brick operation is preceded by a fix-layout, running remove-brick status on a node which does not contain any of the bricks that were removed displays fix-layout status. The defrag_cmd variable was not updated in glusterd for the nodes not hosting removed bricks causing the status parsing to go wrong. This is now updated. Also made minor modifications to the spacing in the fix-layout status output. Change-Id: Ib735ce26be7434cd71b76e4c33d9b0648d0530db BUG: 1389697 Signed-off-by: N Balachandran <nbalacha@redhat.com> Reviewed-on: http://review.gluster.org/15749 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd/quota: upgrade quota.conf file during an upgradeManikandan Selvaganesh2016-11-074-16/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem ======= When quota is enabled on 3.6, it will have quota conf version in quota.conf as v1.1. This node gets upgraded to 3.7 but it will still have quota conf version as v1.1 until a quota enable/disable/set limit is initiated. When this is not initiated and when this node tries to peer probe a node which is a fresh install of 3.7 (which will have quota conf version as v1.2), then this will result in "Peer rejected" state. This patch fixes the issue. Solution ======== When an upgrade happens from 3.6 to 3.7, quota.conf file needs to be modified as well. With 3.6, in quota.conf the version will be v1.1 and it needs to be changed to v1.2 from 3.7. This is because in 3.7, inode quota feature is introduced. So when an op-version bumpup happens quota.conf needs to be upgraded with quota conf version v1.2 and all the 16 byte uuid needs to be changed to 17 bytes uuid as well. Previously, when the cluster version is upgraded to 3.7, the quota.conf got upgraded as well. But, the upgradation was done only when quota enable/disable/set limit is done. With this patch, the upgradation is done during a cluster op version bump up as well. Change-Id: Idb5ba29d3e1ea0e45c85d87c952c75da9e0f99f0 BUG: 1371539 Signed-off-by: Manikandan Selvaganesh <mselvaga@redhat.com> Reviewed-on: http://review.gluster.org/15352 Tested-by: Atin Mukherjee <amukherj@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* snapshot: Fix the failure to recreate clones with same nameAvra Sengupta2016-11-014-17/+44
| | | | | | | | | | | | | | | | | | | The brick path of snapshot clones contained the clonename, thereby failing to create newer clones with the same name after the original clone had been deleted. This fix creates the brick path with the clone's vol id instead of the clones name. Hence future clones with the same name will not have the namespace clash. Change-Id: I262712adc576122f051b5d1ce171d020efaefd1a BUG: 1387160 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/15683 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* glusterd/shared storage: Check for hook-script at stagingAvra Sengupta2016-10-272-6/+25
| | | | | | | | | | | | | | | | | Check if S32gluster_enable_shared_storage.sh is present at /var/lib/glusterd/hooks/1/set/post/ at staging before proceeding with the command. Fail the command with the appropriate error message in case it is not present. Change-Id: I84e3912f1cdffb927f8a40d74d52be43ee69388b BUG: 1388348 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/15718 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd: use GF_BRICK_STOPPING as intermediate brickinfo->status stateAtin Mukherjee2016-10-252-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | On a volume stop trigger glusterd issues a brick-op to terminate the brick process during brick-op phase , however in the commit-op glusterd once again tries to kill the same process if it exists and then mark the brickinfo->status flag to GF_BRICK_STOPPED. In the former case, if brick is successfully killed there is a possibility that GlusterD will receive RPC_CLNT_DISCONNECT from the said brick process before even the commit op phase is executed and hence by that time brickinfo->status will still be set to GF_BRICK_STARTED. BRICK_DISCONNECT event should be only sent if a brick has been killed and not through a volume stop/remove brick trigger, however due to this trace, this event is also sent out on a volume stop. Fix is to introduce an intermediate state GF_BRICK_STOPPING which can be used to mark the brick status at brick op phase of volume stop/remove brick to avoid sending spurious BRICK_DISCONNECT events on a volume stop trigger. Change-Id: Ieed4450e1c988715e0f9958be44faa6b14be81e1 BUG: 1387652 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/15699 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kaushal M <kaushal@redhat.com>
* snapshot: Fix for memory leaks in snapshot code pathAvra Sengupta2016-10-253-12/+47
| | | | | | | | | | | Change-Id: Idc2cb16574d166e3c0ee1f7c3a485f1acb19fc8c BUG: 1386088 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/15668 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* glusterd: conditionally pass uuid for EVENT_PEER_CONNECTAtin Mukherjee2016-10-211-3/+10
| | | | | | | | | | | | | | | | | | When a new node is probed, on the first RPC_CLNT_CONNECT peerctx->uuid is set to NULL as the same is yet to be populated. However the subesquent (dis)connect events would be carrying the valid UUIDs. Solution is not to generate EVENT_PEER_CONNECT on a peer probe trigger as CLI is already going to take care of generating the same. Change-Id: I2f0de054ca09f12013a6afdd8ee158c0307796b9 BUG: 1386516 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/15678 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Samikshan Bairagya <samikshan@gmail.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* cli, glusterd: Address issues in get-state cli outputSamikshan Bairagya2016-10-204-79/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | This fixes the following data points: 1. Volume type 2. Peer state 3. List of other hostnames for a peer 4. Data unit information for rebalance The following data points are removed: 1. Mount options and filesystem types for bricks 2. global-option-version from list of global options The following data points are added: 1. Replica Count 2. Tier type for bricks belonging to hot/cold tier Change-Id: I5011250e863fdc4929b203cdb345d79b2f16c6a5 BUG: 1385839 Signed-off-by: Samikshan Bairagya <samikshan@gmail.com> Reviewed-on: http://review.gluster.org/15662 Reviewed-by: mohammed rafi kc <rkavunga@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* cluster/tier: handle fast demotionsMilind Changire2016-10-191-1/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Demote files on priority if hi-watermark has been breached and continue to demote until the watermark drops below hi-watermark. Monitor watermark more frequently. Trigger demotion as soon as hi-watermark is breached. Add cluster.tier-emergency-demote-query-limit option to limit number of files returned from the database query for every iteration of tier_migrate_using_query_file(). If watermark hasn't dropped below hi-watermark during the first iteration, the next iteration will be triggered approximately 1 second after tier_demote() returns to the main tiering loop. Update changetimerecorder xlator to handle query for emergency demote mode. Add tier-ctr-interface.h: Move tier and ctr interface specific macros and struct definition from libglusterfs/src/gfdb/gfdb_data_store.h to new header libglusterfs/src/tier-ctr-interface.h Change-Id: If56af78c6c81d37529b9b6e65ae606ba5c99a811 BUG: 1366648 Signed-off-by: Milind Changire <mchangir@redhat.com> Reviewed-on: http://review.gluster.org/15158 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Dan Lambright <dlambrig@redhat.com>
* glusterd: set the brickinfo->port before spawning the bricksAtin Mukherjee2016-10-181-4/+8
| | | | | | | | | | | | | | | | | | | | | As of now, when glusterd spawns a brick process, post spawning, the brickinfo's port is set. The side effect of this is it opens up an window where the pmap_signin event can be initiated by the brick to glusterd and glusterd fails to update signed_in flag since the brickinfo port is still 0 and the comparison of port and brickinfo->port fails. As a solution, set the brickinfo->port post pmap_registry_alloc and if the brick spawn fails reset it to 0. This logic applies for rdma port too. Change-Id: I00a13d4c6d6809ebd19a972aa13e71ee5eac7e35 BUG: 1385575 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/15655 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Samikshan Bairagya <samikshan@gmail.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* trivial: correct some spelling mistakes in comments and logsNiels de Vos2016-10-182-2/+2
| | | | | | | | | | | | | | BUG: 1385593 Change-Id: Icfae9e557a284182c6c22e9606fdd641528906f0 Reported-by: Patrick Matthäi <pmatthaei@debian.org> Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/15656 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: jiffin tony Thottan <jthottan@redhat.com> Reviewed-by: Kotresh HR <khiremat@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org>
* glusterd: enable default configurations post upgrade to >= 3.9.0 versionsAtin Mukherjee2016-10-162-10/+80
| | | | | | | | | | | | | | | | | | | With 3.8.0 onwards volume options like nfs.disable, transport.address-family have some default configuration value. If a volume was created pre upgrade to 3.8.0 or higher the default options are not set post upgrade. This patch takes care of putting the default values in the op-version bump up workflow. However these changes will only reflect from 3.9.0 onwards Change-Id: I9a8d848cd08d87ddcb80dbeac27eaae097d9cbeb BUG: 1379223 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/15568 Reviewed-by: jiffin tony Thottan <jthottan@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: soumya k <skoduri@redhat.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* mgmt/glusterd: Cleanup memory leaks in handshakeVijay Bellur2016-10-111-0/+6
| | | | | | | | | | | | | Thanks to bingxuan.zhang at nokia dot com for the report and patch. Change-Id: I994f82493fec7827f31592340af5bda83322f878 BUG: 1377584 Signed-off-by: Vijay Bellur <vbellur@redhat.com> Reviewed-on: http://review.gluster.org/15612 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd: Revert 368e26f454fe35477e46dc698fa6b8c3c608ea8dN Balachandran2016-09-261-39/+0
| | | | | | | | | | | | | | | | The earlier fix prevented rebalance from starting even if only a single brick of a replica set was down. Change-Id: I8c9a7d4c1fe33f7749568357462f29796e1b832a BUG: 1376671 Signed-off-by: N Balachandran <nbalacha@redhat.com> Reviewed-on: http://review.gluster.org/15517 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd: "gluster v heal test statistics heal-count replica" output is not ↵Mohit Agrawal2016-09-261-3/+2
| | | | | | | | | | | | | | | | | | | | correct Problem : "gluster v heal test statistcs heal-count replica" does not show correct output. Solution: After update condition (match brick name) in _select_hxlator_with_matching_brick, it shows correct output. BUG: 1325792 Change-Id: I60cc7c68ea70bce267a747570f91dcddbc1d9016 Signed-off-by: Mohit Agrawal <moagrawa@redhat.com> Reviewed-on: http://review.gluster.org/15494 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Ravishankar N <ravishankar@redhat.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd: fix return val in glusterd_op_volume_dict_uuid_to_hostname ()Atin Mukherjee2016-09-261-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | glusterd_op_volume_dict_uuid_to_hostname () ignores few dict_get_str failures but doesn't reset the ret value to 0. Reproducer steps: 1. Configure a volume and start it (gNFS has to be disabled) 2. gluster volume status An warning log is observed with: [MSGID: 106217] [glusterd-op-sm.c:4706:glusterd_op_modify_op_ctx] 0-management: Failed uuid to hostname conversion [2016-09-22 09:21:38.537533] W [MSGID: 106387] [glusterd-op-sm.c:4812:glusterd_op_modify_op_ctx] 0-management: op_ctx modification failed Change-Id: I1d3aa79304d83a9d5db1b7198773d8c2780e24a9 BUG: 1378492 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/15547 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Samikshan Bairagya <samikshan@gmail.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* tier/ctr/sql : Dafault values for sql cache and wal sizeJoseph Fernandes2016-09-221-6/+6
| | | | | | | | | | | | | | | | Setting default values for sql cache and wal size cache : 12500 pages wal : 25000 pages 1 pages - 4096 bytes Change-Id: Iae3927e021af2e3f7617d45f84e81de3b7d93f1c BUG: 1377864 Signed-off-by: Dan Lambright <dlambrig@redhat.com> Reviewed-on: http://review.gluster.org/15536 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Milind Changire <mchangir@redhat.com>
* build: out-of-tree builds generates files in the wrong directoryKaleb S KEITHLEY2016-09-181-8/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | And minor cleanup of a few of the Makefile.am files while we're at it. Rewrite the make rules to do what xdrgen does. Now we can get rid of xdrgen. Note 1. netbsd6's sed doesn't do -i. Why are we still running smoke tests on netbsd6 and not netbsd7? We barely support netbsd7 as it is. Note 2. Why is/was libgfxdr.so (.../rpc/xdr/src/...) linked with libglusterfs? A cut-and-paste mistake? It has no references to symbols in libglusterfs. Note3. "/#ifndef\|#define\|#endif/" (note the '\'s) is a _basic_ regex that matches the same lines as the _extended_ regex "/#(ifndef|define|endif)/". To match the extended regex sed needs to be run with -r on Linux; with -E on *BSD. However NetBSD's and FreeBSD's sed helpfully also provide -r for compatibility. Using a basic regex avoids having to use a kludge in order to run sed with the correct option on OS X. Note 4. Not copying the bit of xdrgen that inserts copyright/license boilerplate. AFAIK it's silly to pretend that machine generated files like these can be copyrighted or need license boilerplate. The XDR source files have their own copyright and license; and their copyrights are bound to be more up to date than old boilerplate inserted by a script. From what I've seen of other Open Source projects -- e.g. gcc and its C parser files generated by yacc and lex -- IIRC they don't bother to add copyright/license boilerplate to their generated files. It appears that it's a long-standing feature of make (SysV, BSD, gnu) for out-of-tree builds to helpfully pretend that the source files it can find in the VPATH "exist" as if they are in the $cwd. rpcgen doesn't work well in this situation and generates files with "bad" #include directives. E.g. if you `rpcgen ../../../../$srcdir/rpc/xdr/src/glusterfs3-xdr.x`, you get an #include directive in the generated .c file like this: ... #include "../../../../$srcdir/rpc/xdr/src/glusterfs3-xdr.h" ... which (obviously) results in compile errors on out-of-tree build because the (generated) header file doesn't exist at that location. Compared to `rpcgen ./glusterfs3-xdr.x` where you get: ... #include "glusterfs3-xdr.h" ... Which is what we need. We have to resort to some Stupid Make Tricks like the addition of various .PHONY targets to work around the VPATH "help". Warning: When doing an in-tree build, -I$(top_builddir)/rpc/xdr/... looks exactly like -I$(top_srcdir)/rpc/xdr/... Don't be fooled though. And don't delete the -I$(top_builddir)/rpc/xdr/... bits Change-Id: Iba6ab96b2d0a17c5a7e9f92233993b318858b62e BUG: 1330604 Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/14085 Tested-by: Niels de Vos <ndevos@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* ganesha/glusterd : Correct the path for ganesha conf dir in MakefileJiffin Tony Thottan2016-09-161-1/+1
| | | | | | | | | | | | | | | | | | | The value for ganesha conf dir in Makefile.am is mistakenly entered as following : DCONFDIR=\"/$(runstatedir)/gluster/shared_storage/nfs-ganesha\" Here value for runstatedir is seems to "NULL" which results wrong path for ganesha configuration directory Change-Id: I0b7ebd8e2503de0cb79b601553c4405d0d1fd711 BUG: 1355956 Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> Reviewed-on: http://review.gluster.org/15355 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: soumya k <skoduri@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org>
* glusterd/handler: fix unused variable warnings/errorsKaleb S. KEITHLEY2016-09-151-1/+0
| | | | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a "pragma leak" where the generated rpc/xdr headers have a pair of pragmas that disable these warnings. With the warnings disabled, many unused variables have crept into the code base. And 14085 won't pass its own smoke test until all these warnings are fixed. BUG: 1369124 Change-Id: Ia2742a44fcf1e16ade1f55287096dbecdb8eb9b7 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15514 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* xlators/glusterd: fix unused variable warnings/errorsKaleb S. KEITHLEY2016-09-135-14/+0
| | | | | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a "pragma leak" where the generated rpc/xdr headers have a pair of pragmas that disable these warnings. With the warnings disabled, many unused variables have crept into the code base. And 14085 won't pass its own smoke test until all these warnings are fixed. BUG: 1369124 Change-Id: I7ccaa4f1cc817fa81082cee83e99a2dc7e542e17 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15479 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kotresh HR <khiremat@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd: fix unused variable warnings/errorsKaleb S. KEITHLEY2016-09-121-29/+0
| | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a/the "leak" - via the generated rpc/xdr headers - of pragmas that mask these warnings. However 14085 won't pass the smoke test until all the warnings are fixed. Change-Id: Ibf069935a630cf10a9a829f5a3194621a891b616 BUG: 1369124 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15282 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Ravishankar N <ravishankar@redhat.com>
* glusterd (handler): fix unused variable warnings/errorsKaleb S. KEITHLEY2016-09-121-33/+27
| | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a/the "leak" - via the generated rpc/xdr headers - of pragmas that mask these warnings. However 14085 won't pass the smoke test until all the warnings are fixed. Change-Id: Ic4eabed88a363e85dbc4823b250a5a7f2a00a50f BUG: 1369124 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15265 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: jiffin tony Thottan <jthottan@redhat.com>
* glusterd (geo-rep): fix unused variable warnings/errorsKaleb S. KEITHLEY2016-09-121-18/+4
| | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a/the "leak" - via the generated rpc/xdr headers - of pragmas that mask these warnings. However 14085 won't pass the smoke test until all the warnings are fixed. Change-Id: I2edacd3d0f3924b1be0f0398ba9ac076459c5a61 BUG: 1369124 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15263 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Saravanakumar Arumugam <sarumuga@redhat.com>
* glusterd (snapshot): fix unused variable warnings/errorsKaleb S. KEITHLEY2016-09-121-22/+0
| | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a/the "leak" - via the generated rpc/xdr headers - of pragmas that mask these warnings. However 14085 won't pass the smoke test until all the warnings are fixed. Change-Id: I359145d9e726b0fae78cac8003b57c216780cbba BUG: 1369124 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15278 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* Tier: failing detach commit on detach failure and in-progresshari gowtham2016-09-121-0/+11
| | | | | | | | | | | | | | | | | | | | PROBLEM: if detach status has failed or if it remains in progress we allow detach commit to happen. only detach force should be allowed. FIX: check the detach status for failure or inprogress and disallow with the apt error message. Change-Id: Ib97d540fec67717bb55c18d133187c665cf69ef1 BUG: 1374584 Signed-off-by: hari gowtham <hgowtham@redhat.com> Reviewed-on: http://review.gluster.org/15438 Smoke: Gluster Build System <jenkins@build.gluster.org> Tested-by: hari gowtham <hari.gowtham005@gmail.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Tested-by: Dan Lambright <dlambrig@redhat.com>
* glusterd (utils): fix unused variable warnings/errorsKaleb S. KEITHLEY2016-09-121-39/+3
| | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a/the "leak" - via the generated rpc/xdr headers - of pragmas that mask these warnings. However 14085 won't pass the smoke test until all the warnings are fixed. Change-Id: I3efaad13cc4cbba7853ada20e838b6fe417ca2d6 BUG: 1369124 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15280 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* cluster/ec: Add support for hardware accelerationXavier Hernandez2016-09-081-0/+5
| | | | | | | | | | | | | | | | | | | | | | | This patch implements functionalities for fast encoding/decoding using hardware support. Currently optimized x86_64, SSE and AVX is added. Additionally this patch implements a caching mecanism for inverse matrices to reduce computation time, as well as a new method for computing the inverse that takes quadratic time instead of cubic. Finally some unnecessary memory copies have been eliminated to further increase performance. Change-Id: I26c75f26fb4201bd22b51335448ea4357235065a BUG: 1289922 Signed-off-by: Xavier Hernandez <xhernandez@datalab.es> Reviewed-on: http://review.gluster.org/12837 Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
generated by cgit (git 2.34.1) at 2024-06-10 18:51:07 +0000