summaryrefslogtreecommitdiffstats
path: root/xlators/mgmt
Commit message (Collapse)AuthorAgeFilesLines
* geo-rep: Copy geo-rep hook-script during source installKotresh HR2015-04-021-9/+10
| | | | | | | | | | | | | | | | | The hook-script S56glusterd-geo-rep-create-post.sh was not copying to glusterd working directory when geo-rep is installed through source. Hence the geo-rep create fails unless the script is manually copied. This patch addresses the issue by copying the hook-script during make install. Change-Id: I185a877ed720e8300f0e888ab481d0c8c23bf815 BUG: 1207201 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/10051 Reviewed-by: Aravinda VK <avishwan@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: group server-quorum related code togetherKrishnan Parthasarathi2015-04-0111-439/+491
| | | | | | | | | | | | | | | Server-quorum implementation was spread in many files. This patch brings them all together into a single file, namely glusterd-server-quorum.c. All exported functions are available via glusterd-server-quorum.h Change-Id: I8fd77114b5bc6b05127cb8a6a641e0295f0be7bb BUG: 1205592 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/9492 Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* glusterd: gluster command should retrieve current op-version of the NODEGaurav Kumar Garg2015-04-011-0/+10
| | | | | | | | | | | | | | | | | | Problem: glusterd was failing to get some specific volume option. for eg: gluster volume get <vol-name> cluster.op-version Fix: glusterd should set count value in dictionary while retrieving specific volume option. Change-Id: Iada768ea3d8a0006895525eca2c2dcc40432a4ea BUG: 1199451 Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> Reviewed-on: http://review.gluster.org/9821 Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* Upcall: Added xlator options to enable cache-invalidationSoumya Koduri2015-03-311-0/+10
| | | | | | | | | | | | | | | | Added two xlator options to enable cache-invalidation and set cache-invalidation-timeout. In addition, made few minor changes in the upcall processing code in gfapi. Change-Id: Ie0b32ca8348e34e3fe4f1e7df30cc925fa4aad31 BUG: 1200271 Signed-off-by: Soumya Koduri <skoduri@redhat.com> Reviewed-on: http://review.gluster.org/9975 Reviewed-by: Meghana M <mmadhusu@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* NFS-Ganesha: Start and stop NFS-Ganesha service in a platform independent wayMeghana Madhusudhan2015-03-311-11/+74
| | | | | | | | | | | | | | | Check for what binaries are installed at run time, pick appropriate command and perform the required action. The service managers supported are systemctl,service and invoke-rc.d. Change-Id: I8deef2bfe5a09da5b055fe6176a58452a882fa76 BUG: 1202316 Signed-off-by: Meghana Madhusudhan <mmadhusu@redhat.com> Reviewed-on: http://review.gluster.org/9991 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: soumya k <skoduri@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* quota/cli: improve cli error message when setting limit on invalid pathvmallika2015-03-301-1/+1
| | | | | | | | | | | Change-Id: I5976777adf770d42aa33ebbe3833fb14c1ff658e BUG: 1206535 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/10026 Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Sachin Pandit <spandit@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Gfdb Query Fix and Volume option fixJoseph Fernandes2015-03-301-4/+4
| | | | | | | | | | | | | | 1) Query fix in find_changed_with_freq() 2) Volume option typo fix for write_freq_threshold and read_freq_threshold Change-Id: I38e154818178aab412b2d7b2914cd29acef66ffb BUG: 1207343 Signed-off-by: Joseph Fernandes <josferna@redhat.com> Reviewed-on: http://review.gluster.org/10050 Reviewed-by: Dan Lambright <dlambrig@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* geo-rep: Add support for aclsKotresh HR2015-03-302-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for ACLS. When it sees SETXATTR in Changelog, it adds the file to data queue. rsync/tar+ssh will take care of syncing ACLS. User set ACLS will be synced to Slave. This requires "system.posix_acl_access" to go through when client-pid is equal GF_CLIENT_PID_GSYNCD in fuse layer. New config interface is introduced, sync-acls Which can be set using geo-rep config(Default is True) gluster volume geo-replication <VOLUME> <SLAVEHOST>::<SLAVEVOL> \ config sync-acls false Change-Id: I7eb3523fa72b8fed830efc98138891244e830d65 BUG: 1187021 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/10001 Reviewed-by: Aravinda VK <avishwan@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* glusterd: replace glusterd_volinfo_delete calls with glusterd_volinfo_unrefAtin Mukherjee2015-03-302-16/+4
| | | | | | | | | | | | | volinfo has its own ref counting mechanism. While deleting a volinfo object its always wiser to check there is 0 reference to it and then delete it. Change-Id: I446bd83432bd94aa19e29c6026367dfc1231786f BUG: 1183463 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/9462 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* glusterd: Use txn_opinfo instead of global op_info in ↵Atin Mukherjee2015-03-291-5/+20
| | | | | | | | | | | | | | | | | | | | glusterd_volume_heal_use_rsp_dict Due to http://review.gluster.org/#/c/9908/ global opinfo is no more a valid place holder for keeping transaction information for syncop task. glusterd_volume_heal_use_rsp_dict () was referring to global op_info due to which the function was always asserting on the op code. Change-Id: I1d416fe4edb40962fe7a0f6ecf541602debac56e BUG: 1206655 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/10034 Reviewed-by: Emmanuel Dreyfus <manu@netbsd.org> Tested-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* glusterd : fix memory overrun for opinfo.local_xaction_peersAtin Mukherjee2015-03-291-1/+1
| | | | | | | | | | | | | | | Due to incorrect sizeof local_xaction_peers was not allocated as intended which lead a memory overrun in gf_free while freeing local_xaction_peers. Change-Id: Ie4d63289aae51727eea091bce0e6cb0a496ce7cf BUG: 1204727 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/10032 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Emmanuel Dreyfus <manu@netbsd.org> Tested-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* features/shard: Bug fixesKrutika Dhananjay2015-03-271-0/+1
| | | | | | | | | | | | | | | | | * Return number of bytes written in writev cbk on success * Eliminate separate inode table for sharding xlator. * Fix appearance of "shard" as an option within the volfile for subvolume of type features/shard. * Fix values of min and max allowed shard block size * Return @new as opposed to NULL in shard_create_gfid_dict() on success Change-Id: I6319d377a196d1c5ceed1f65d337ff8eabcb21f8 BUG: 1205661 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/10003 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: clean up global xaction_peer occurancesanand2015-03-261-1/+0
| | | | | | | | | | | | | | Remove xaction_peers from glusterd_conf_t which was left out by http://review.gluster.org/#/c/9980/ patch Change-Id: I8494ec181ec11922861d7bad12c46d45e036637b BUG: 1204727 Signed-off-by: anand <anekkunt@redhat.com> Reviewed-on: http://review.gluster.org/10006 Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* glusterd: clean up global xaction_peer occurancesAtin Mukherjee2015-03-264-28/+0
| | | | | | | | | | | | | | With http://review.gluster.org/#/c/9972/ there is no more need to maintain xaction_peers in glusterd_conf_t. This patch cleans up code for all the occurances of xaction_peers. Change-Id: I4fbf2df0fa9b8a8751029be36be7f76f6464cc76 BUG: 1204727 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/9980 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* glusterd: Maintain local xaction_peer list for op-smAtin Mukherjee2015-03-267-47/+61
| | | | | | | | | | | | | | | http://review.gluster.org/9269 addresses maintaining local xaction_peers in syncop and mgmt_v3 framework. This patch is to maintain local xaction_peers list for op-sm framework as well. Change-Id: Idd8484463fed196b3b18c2df7f550a3302c6e138 BUG: 1204727 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/9972 Reviewed-by: Anand Nekkunti <anekkunt@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* glusterd: bitrot scrub-throttle/scrub-frequency/scrub option handlingGaurav Kumar Garg2015-03-251-0/+111
| | | | | | | | | | | | | | | | | | CLI commands for bitrot features: volume bitrot <volname> {scrub-throttle frozen|lazy|normal|aggressive} volume bitrot <volname> {scrub-frequency daily|weekly|biweekly|monthly} volume bitrot <volname> {scrub pause|resume} These commands will handle their options and set respective value in dictionary. Change-Id: I1e8aa1b1c7d91a7f0faec9a2968b3072f42f8ba8 BUG: 1170075 Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> Reviewed-on: http://review.gluster.org/9985 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: Prevent possible dealock in glusterd_friend_removeKaushal M2015-03-251-1/+3
| | | | | | | | | | | | | | | | | | This change was developed on the git branch at [1]. This commit is a combination of the following commits on the development branch. b02290e Prevent possible dealock in glusterd_friend_remove [1]: https://github.com/kshlm/glusterfs/tree/urcu Change-Id: I1efeaf18f2054f4252ee95244908613542d209d9 BUG: 1205186 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/9979 Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Gaurav Kumar Garg <ggarg@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* glusterd: Prevent possible deadlock due to glusterd_quorum_countKaushal M2015-03-252-6/+8
| | | | | | | | | | | | | | | | | | | | | | | Also rename the macro glusterd_quorum_count to GLUSTERD_QUORUM_COUNT so that it stands out as a macro. This change was developed on the git branch at [1]. This commit is a combination of the following commits on the development branch. 0fbd7ba Prevent possible deadlock due to glusterd_quorum_count 5da3062 Rename glusterd_quorum_count to GLUSTERD_QUORUM_COUNT b3aa3c4 Enclose GLUSTERD_QUORUM_COUNT definition in a do-while block [1]: https://github.com/kshlm/glusterfs/tree/urcu Change-Id: Ic4b3949f303d72ce53e0139f62b83b8d13fb4e47 BUG: 1205186 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/9978 Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Gaurav Kumar Garg <ggarg@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* glusterd: Fixing wrong array comparison (Coverity fix)Nandaja Varma2015-03-241-1/+1
| | | | | | | | | | | | | | Coverity CID: 1256175 Change-Id: Ib29fc2eaa54a7ce8369918e68bf117d0f04ca94d BUG: 789278 Signed-off-by: Nandaja Varma <nandaja.varma@gmail.com> Reviewed-on: http://review.gluster.org/9679 Reviewed-by: Vijaikumar Mallikarjuna <vmallika@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cli/glusterd: CLI interface for BitRot detectionVenky Shankar2015-03-2410-29/+337
| | | | | | | | | | | | | | | | * BitRot enable/disable CLI per volume * Volfile generation for Scrubber * Relevant glusterd infrastructure Change-Id: I1212af63f93ecc52b22ee6da920e1664f66a1e39 BUG: 1170075 Original-Author: Raghavendra Bhat <raghavendra@redhat.com> Original-Author: Venky Shankar <vshankar@redhat.com> Original-Author: Gaurav Kumar Garg <ggarg@redhat.com> Original-Author: Anand Nekkunti <anekkunt@redhat.com> Reviewed-on: http://review.gluster.org/9986 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* mgmt/glusterd: generate volfile for BitDVenky Shankar2015-03-2410-3/+325
| | | | | | | | | | | | | | * Implement the skeleton of bit-rot xlator. Original-Author: Raghavendra Bhat <raghavendra@redhat.com> Signed-off-by: Venky Shankar <vshankar@redhat.com> Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> Signed-off-by: Anand Nekkunti <anekkunt@redhat.com> Change-Id: If33218bdc694f5f09cb7b8097c4fdb74d7a23b2d BUG: 1170075 Reviewed-on: http://review.gluster.org/9710 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* read-only: read-only/worm translator should be in brick graph by defaultAtin Mukherjee2015-03-242-21/+15
| | | | | | | | | | | | | | | | | | | | | Problem: read-only/worm translator is not loaded by default in brick graph because of which when read-only option is set through volume set volume still remains writable untill the bricks are restarted as the translator does not have an inmemory flag to decide whether the read-only/worm option is turned or not. Solution: read-only/worm should be loaded by default in brick graph and the read-only/worm option can be toggled through volume set command. read-only/worm translator now' has an in-memory flag to decide whether the volume is read-only or not and based on that either reject the fop or proceed. Change-Id: Ic79328698f6a72c50433cff15ecadb1a92acc643 BUG: 1134822 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/8571 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Bitrot StubVenky Shankar2015-03-242-0/+27
| | | | | | | | | | | | | Bitrot stub implements object versioning required for identifying signature freshness. More details about versioning is explained as a part of the "bitrot feature documentation" patch. Change-Id: I2ad70d9eb109ba4a12148ab8d81336afda529ad9 BUG: 1170075 Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/9709 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: Do not use global opinfo in syncopAtin Mukherjee2015-03-231-2/+0
| | | | | | | | | | | | | | | | Global opinfo should not be referred by syncop framework as it uses local txn_opinfo for every transaction. There is one place in the codebase where the global opinfo is set with the local txn_opinfo which can lead to an incorrect opinfo for an on-going op-sm transaction which refers to the same global opinfo. Change-Id: Ida63a8871b8d03fe646146eddfd3f2473f1b1d7c BUG: 1202745 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/9908 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Nekkunti <anekkunt@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* features/shard: Introducing sharding translatorKrutika Dhananjay2015-03-192-1/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | Based on the high-level design by Anand V. Avati which can be found @ https://gist.github.com/avati/af04f1030dcf52e16535#sharding-xlator-stripe-20 Still to-do: * complete implementation of inode write fops - [f]truncate, zerofill, fallocate, discard * introduce transaction mechanism in inode write fops * complete readv * Handle open with O_TRUNC * Handle unlinking of all shards during unlink/rename * Compute total ia_size and ia_blocks in lookup, readdirp, etc * wind fsync/flush on all shards Note: Most of the items above are related. Once we come up with a clean way to determine the last shard/shard count for a file/file size and the mgmt of sparse regions of the file, implementing them becomes trivial. Change-Id: Id871379b53a4a916e4baa2e06f197dd8c0043b0f BUG: 1200082 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/9841 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* afr: arbiter xlatorRavishankar N2015-03-192-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds the arbiter translator into the tree. This is a server side xlator used for replica 3 volumes. It sits above posix and will be loaded on the 3rd (last) brick of every afr subvolume in a replica 3 configuration. It intercepts inode read/write operations: reads are unwound with ENOTCONN, inode writes are unwound with success without actually passing them down to posix. Metadata operations are allowed to pass through. The CLI for creating a 3 way replica with arbiter is also added but kept disabled (A 'normal' 3 way replica is created instead). This patch is a part of the arbiter logic implementation for 3 way AFR, details of which can be found at http://review.gluster.org/#/c/9656/ Change-Id: I395b81f49d5da52c466daf5c8518f1bbad9c16fa BUG: 1199985 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/9840 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: CLI commands to create and manage tiered volumes.Dan Lambright2015-03-1910-32/+438
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A tiered volume is a normal volume with some number of new bricks representing "hot" storage. The "hot" bricks can be attached or detached dynamically to a normal volume. When this happens, a new graph is constructed. The root of the new graph is an instance of the tier translator. One subvolume of the tier translator leads to the old volume, and another leads to the new hot bricks. attach-tier <VOLNAME> [<replica> <COUNT>] <NEW-BRICK> ... [force] volume detach-tier <VOLNAME> [replica <COUNT>] <BRICK> ... <start|stop|status|commit|force> gluster volume rebalance <volume> tier start gluster volume rebalance <volume> tier stop gluster volume rebalance <volume> tier status The "tier start" CLI command starts a server side daemon. The daemon initiates file level migration based on caching policies. The daemon's status can be monitored and stopped. Note development on the "tier status" command is incomplete. It will be added in a subsequent patch. When the "hot" storage is detached, the tier translator is removed from the graph and the tiered volume reverts to its original state as described in the volume's info file. For more background and design see the feature page [1]. [1] http://www.gluster.org/community/documentation/index.php/Features/data-classification Change-Id: Ic8042ce37327b850b9e199236e5be3dae95d2472 BUG: 1194753 Signed-off-by: Dan Lambright <dlambrig@redhat.com> Reviewed-on: http://review.gluster.org/9753 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* Adding ChangeTimeRecorder(CTR) Xlator to GlusterFSJoseph Fernandes2015-03-193-5/+98
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ********************************************************************** ChangeTimeRecorder(CTR) Xlator | ********************************************************************** ChangeTimeRecorder(CTR) is server side xlator(translator) which sits just above posix xlator. The main role of this xlator is to record the access/write patterns on a file residing the brick. It records the read(only data) and write(data and metadata) times and also count on how many times a file is read or written. This xlator also captures the hard links to a file(as its required by data tiering to move files). CTR Xlator is the consumer of libgfdb. To Enable/Disable CTR Xlator: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ gluster volume set <volume-name> features.ctr-enabled {on/off} To Enable/Disable Frequency Counter Recording in CTR Xlator: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ gluster volume set <volume-name> features.record-counters {on/off} Change-Id: I5d3cf056af61ac8e3f8250321a27cb240a214ac2 BUG: 1194753 Signed-off-by: Joseph Fernandes <josferna@redhat.com> Reviewed-on: http://review.gluster.org/9935 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cli/glusterd: cli command implementation for bitrot featuresGaurav Kumar Garg2015-03-1811-2/+431
| | | | | | | | | | | | | | | | | CLI command for bitrot features. volume bitrot <volname> enable|disable Above command will enable/disable bitrot feature for particular volume. BUG: 1170075 Change-Id: Ie84002ef7f479a285688fdae99c7afa3e91b8b99 Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> Signed-off-by: Anand nekkunti <anekkunt@redhat.com> Signed-off-by: Dominic P Geevarghese <dgeevarg@redhat.com> Reviewed-on: http://review.gluster.org/9866 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* features/quota : Introducing inode quotavmallika2015-03-183-79/+114
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ========================================================================== Inode quota ========================================================================== = Currently, the only way to retrieve the number of files/objects in a = = directory or volume is to do a crawl of the entire directory/volume. = = This is expensive and is not scalable. = = = = The proposed mechanism will provide an easier alternative to determine = = the count of files/objects in a directory or volume. = = = = The new mechanism proposes to store count of objects/files as part of = = an extended attribute of a directory. Each directory's extended = = attribute value will indicate the number of files/objects present = = in a tree with the directory being considered as the root of the tree. = = = = The count value can be accessed by performing a getxattr(). = = Cluster translators like afr, dht and stripe will perform aggregation = = of count values from various bricks when getxattr() happens on the key = = associated with file/object count. = A new interface is introduced: ------------------------------ limit-objects : limit the number of inodes at directory level list-objects : list the directories where the limit is set remove-objects : remove the limit from the directory ========================================================================== CLI COMMAND: gluster volume quota <volname> limit-objects <path> <number> [<percent>] * <number> is a hard-limit for number of objects limitation for path "<path>" If hard-limit is exceeded, creation of file/directory is no longer permitted. * <percent> is a soft-limit for number of objects creation for path "<path>" If soft-limit is exceeded, a warning is issued for each creation. CLI COMMAND: gluster volume quota <volname> remove-objects [path] ========================================================================== CLI COMMAND: gluster volume quota <volname> list-objects [path] ... Sample output: ------------------ Path Hard-limit Soft-limit Used Available Soft-limit exceeded? Hard-limit exceeded? ------------------------------------------------------------------------ -------------------------------------- /dir 10 80% 10 0 Yes Yes ========================================================================== [root@snapshot-28 dir]# ls a b file11 file12 file13 file14 file15 file16 file17 [root@snapshot-28 dir]# touch a1 touch: cannot touch `a1': Disk quota exceeded * Nine files are created in directory "dir" and directory is included in * the count too. Hence the limit "10" is reached and further file creation fails ========================================================================== Note: We have also done some re-factoring in cli for volume name validation. New function cli_validate_volname is created ========================================================================== Change-Id: I1823497de4f790a2a20ebb1770293472ea33ee2b BUG: 1190108 Signed-off-by: Sachin Pandit <spandit@redhat.com> Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/9769 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Adding Libgfdb to GlusterFSJoseph Fernandes2015-03-181-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ************************************************************************* Libgfdb | ************************************************************************* Libgfdb provides abstract mechanism to record extra/rich metadata required for data maintenance, such as data tiering/classification. It provides consumer with API for recording and querying, keeping the consumer abstracted from the data store used beneath for storing data. It works in a plug-and-play model, where data stores can be plugged-in. Presently we have plugin for Sqlite3. In the future will provide recording and querying performance optimizer. In the current implementation the schema of metadata is fixed. Schema: ~~~~~~ GF_FILE_TB Table: ~~~~~~~~~~~~~~~~~ This table has one entry per file inode. It holds the metadata required to make decisions in data maintenance. GF_ID (Primary key) : File GFID (Universal Unique IDentifier in the namespace) W_SEC, W_MSEC : Write wind time in sec & micro-sec UW_SEC, UW_MSEC : Write un-wind time in sec & micro-sec W_READ_SEC, W_READ_MSEC : Read wind time in sec & micro-sec UW_READ_SEC, UW_READ_MSEC : Read un-wind time in sec & micro-sec WRITE_FREQ_CNTR INTEGER : Write Frequency Counter READ_FREQ_CNTR INTEGER : Read Frequency Counter GF_FLINK_TABLE: ~~~~~~~~~~~~~~ This table has all the hardlinks to a file inode. GF_ID : File GFID (Composite Primary Key)``| GF_PID : Parent Directory GFID (Composite Primary Key) |-> Primary Key FNAME : File Base Name (Composite Primary Key)__| FPATH : File Full Path (Its redundant for now, this will go) W_DEL_FLAG : This Flag is used for crash consistancy, when a link is unlinked. i.e Set to 1 during unlink wind and during unwind this record is deleted LINK_UPDATE : This Flag is used when a link is changed i.e rename. Set to 1 when rename wind and set to 0 in rename unwind Libgfdb API: ~~~~~~~~~~~ Refer libglusterfs/src/gfdb/gfdb_data_store.h Change-Id: I2e9fbab3878ce630a7f41221ef61017dc43db11f BUG: 1194753 Signed-off-by: Joseph Fernandes <josferna@redhat.com> Signed-off-by: Dan Lambright <dlambrig@redhat.com> Signed-off-by: Joseph Fernandes <josferna@redhat.com> Reviewed-on: http://review.gluster.org/9683 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* CLI : GLobal option for NFS-GaneshaMeghana Madhusudhan2015-03-186-17/+272
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A new global CLI option has been introduced for NFS-Ganesha. gluster features.ganesha enable/disable. This option is persistent and shall be inherited by new volumes created after this option is set. gluster features.ganesha enable It carries out the following functions: 1. Disables gluster-nfs across the cluster 2. Starts NFS-Ganesha server on a subset of nodes and exports '/'. 3. Creates the HA cluster for NFS-Ganesha. 4. Writes the option into the global config file. gluster features.ganesha disable 1. Stops NFS-Ganesha server. 2. Tears down the HA cluster for NFS-Ganesha With this change the older volume set options with keys "nfs-ganesha.host" and "nfs-ganesha.enable" will no longer be supported. This commit has only has the CLI related changes. Another patch will be submitted to support this feature entirely. Change-Id: Ie4b66a16c23b33b795738654b9a68f8e2c34efe3 BUG: 1188184 Signed-off-by: Meghana Madhusudhan <mmadhusu@redhat.com> Reviewed-on: http://review.gluster.org/9538 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* glusterd: add new NFS options for exports/netgroups and related cachingNiels de Vos2015-03-181-0/+20
| | | | | | | | | | | | | | | | | The following options for the Gluster/NFS server are added : - nfs.exports-auth-enable - nfs.auth-refresh-interval-sec - nfs.auth-cache-ttl-sec BUG: 1143880 Change-Id: I37a73966c4ed27cd0f8c77200ef68a0d12b385b8 Original-author: Shreyas Siravara <shreyas.siravara@gmail.com> CC: Richard Wareing <rwareing@fb.com> CC: Jiffin Tony Thottan <jthottan@redhat.com> Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9364 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: Remove compilation warningKaushal M2015-03-182-8/+6
| | | | | | | | | | | | | | | | | | | | | | | | In glusterd_peerinfo_destroy, cast the passed 'strcut rcu_head *' pointer to 'gd_rcu_head *' before use in caa_container_of() to prevent the incompatible-pointer compilation warning. Also, refactor peerinfo->head to peerinfo->rcu_head to reduce confusion when reading code. This change was developed on the git branch at [1]. This commit is a combination of the following commits on the development branch. aa4a0bc Rename peerinfo->head to peerinfo->rcu_head c79144b Cast struct rcu_head * to gd_rcu_head * to prevent warning 1d222c3 More head -> rcu_head renames [1]: https://github.com/kshlm/glusterfs/tree/urcu BUG: 1191030 Change-Id: I7ede02090413839563ce44fdf6289697b28777e7 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/9922 Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* cluster/afr: Make read child match check in afr optionalKrutika Dhananjay2015-03-181-0/+6
| | | | | | | | | | | | | | | Having this particular check which was introduced by commit c78998c39f0857ea7aacba360632c148afc54a55 causes a drop in performance in readdirp. So the behavior is made configurable with this patch. Change-Id: I2858fc18b3539df7aa6d3f489e0d5cfaeb8a9b3c BUG: 1202669 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/9917 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* NFS-Ganesha: Volume set option for managing NFS-Ganesha exports.Meghana Madhusudhan2015-03-184-30/+390
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | A dummy translator has been introduced as a place holder for functions related to managing NFS-Ganesha exports. A volume set option is introduced to manage volume level exports. gluster vol set <volname> ganesha.enable ON/OFF 1. gluster volume set <volname> ganesha.enable ON It creates the export config file with a unique export ID. Sends a DBus signal to export this volume dynamically. 2. gluster vol set <volname> ganesha.enable OFF Unexports the specific volume. Deletes the specfic config file related to the volume. This change also removes the handling of the older keys "nfs-ganesha.enable" and "nfs-ganesha.host" Change-Id: I8d4a0b542326a6a0c8e4711600b106274d666587 BUG: 1188184 Signed-off-by: Meghana Madhusudhan <mmadhusu@redhat.com> Reviewed-on: http://review.gluster.org/9585 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* Snapshot/clone: clone of a snapshot that will act as a regular volumeMohammed Rafi KC2015-03-182-183/+800
| | | | | | | | | | | | | | | | | snapshot clone will allow us to take a snpahot of a snapshot. Newly created clone volume will be a regular volume with read/write permissions. CLI command snapshot clone <clonename> <snapname> Change-Id: Icadb993fa42fff787a330f8f49452da54e9db7de BUG: 1199894 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/9750 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* socket: use TCP_USER_TIMEOUT to detect client failures quickerNiels de Vos2015-03-172-3/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the network.ping-timeout to set the TCP_USER_TIMEOUT socket option (see 'man 7 tcp'). The option sets the transport.tcp-user-timeout option that is handled in the rpc/socket layer on the protocol/server side. This socket option makes detecting unclean disconnected clients more reliable. When the socket gets closed, any locks that the client held are been released. This makes it possible to reduce the fail-over time for applications that run on systems that became unreachable due to a network partition or general system error client-side (kernel panic, hang, ...). It is not trivial to create a test-case for this at the moment. We need a client that unclean disconnects and an other client that tries to take over the lock from the disconnected client. URL: http://supercolony.gluster.org/pipermail/gluster-devel/2014-May/040755.html Change-Id: I5e5f540a49abfb5f398291f1818583a63a5f4bb4 BUG: 1129787 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/8065 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: soumya k <skoduri@redhat.com> Reviewed-by: Santosh Pradhan <santosh.pradhan@gmail.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* Upcall: New xlator to store various states and send cbk eventsSoumya Koduri2015-03-172-1/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | Framework on the server-side, to handle certain state of the files accessed and send notifications to the clients connected. A generic and extensible framework, used to maintain states in the glusterfsd process for each of the files accessed (including the clients info doing the fops) and send notifications to the respective glusterfs clients incase of any change in that state. This patch handles "Inode Update/Invalidation" upcall event. Feature page: URL: http://www.gluster.org/community/documentation/index.php/Features/Upcall-infrastructure Below link has a writeup which explains the code changes done - URL: https://soumyakoduri.wordpress.com/2015/02/25/glusterfs-understanding-upcall-infrastructure-and-cache-invalidation-support/ Change-Id: Ie3d724be9a3419fcf18901a753e8ec2df2ac802f BUG: 1200262 Signed-off-by: Soumya Koduri <skoduri@redhat.com> Reviewed-on: http://review.gluster.org/9535 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* Features/trash : Combined patches for trash translatorAnoop C S2015-03-164-1/+134
| | | | | | | | | | | | | | | | | | | | | | | | | This is the combined patch set for supporting trash feature. http://www.gluster.org/community/documentation/index.php/Features/Trash Current patch includes the following features: * volume set options for enabling trash globally and exclusively for internal operations like self-heal and re-balance * volume set options for setting the eliminate path, trash directory path and maximum trashable file size. * test script for checking the functionality of the feature * brief documentation on different aspects of trash feature. Change-Id: Ic7486982dcd6e295d1eba0f4d5ee6d33bf1b4cb3 BUG: 1132465 Signed-off-by: Anoop C S <achiraya@redhat.com> Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> Reviewed-on: http://review.gluster.org/8312 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: Protect the peer list and peerinfos with RCU.Kaushal M2015-03-1618-290/+801
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The peer list and the peerinfo objects are now protected using RCU. Design patterns described in the Paul McKenney's RCU dissertation [1] (sections 5 and 6) have been used to convert existing non-RCU protected code to RCU protected code. Currently, we are only targetting guaranteeing the existence of the peerinfo objects, ie., we are only looking to protect deletes, not all updaters. We chose this, as protecting all updates is a much more complex task. The steps used to accomplish this are, 1. Remove all long lived direct references to peerinfo objects (apart from the peerinfo list). This includes references in glusterd_peerctx_t (RPC), glusterd_friend_sm_event_t (friend state machine) and others. This way no one has a reference to deleted peerinfo object. 2. Replace the direct references with indirect references, ie., use peer uuid and peer hostname as indirect references to the peerinfo object. Any reader or updater now uses the indirect references to get to the actual peerinfo object, using glusterd_peerinfo_find. Cases where a peerinfo cannot be found are handled gracefully. 3. The readers get and use the peerinfo object only within a RCU read critical section. This prevents the object from being deleted/freed when in actual use. 4. The deletion of a peerinfo object is done in a ordered manner (glusterd_peerinfo_destroy). The object is first removed from the peerinfo list using an atomic list remove, but the list head is not reset to allow existing list readers to complete correctly. We wait for readers to complete, before resetting the list head. This removes the object from the list completely. After this no new readers can get a reference to the object, and it can be freed. This change was developed on the git branch at [2]. This commit is a combination of the following commits on the development branch. d7999b9 Protect the glusterd_conf_t->peers_list with RCU. 0da85c4 Synchronize before INITing peerinfo list head after removing from list. 32ec28a Add missing rcu_read_unlock 8fed0b8 Correctly exit read critical section once peer is found. 63db857 Free peerctx only on rpc destruction 56eff26 Cleanup style issues e5f38b0 Indirection for events and friend_sm 3c84ac4 In __glusterd_probe_cbk goto unlock only if peer already exists 141d855 Address review comments on 9695/1 aaeefed Protection during peer updates 6eda33d Revert "Synchronize before INITing peerinfo list head after removing from list." f69db96 Remove unneeded line b43d2ec Address review comments on 9695/4 7781921 Address review comments on 9695/5 eb6467b Add some missing semi-colons 328a47f Remove synchronize_rcu from glusterd_friend_sm_transition_state 186e429 Run part of glusterd_friend_remove in critical section 55c0a2e Fix gluster (peer status/ pool list) with no peers 93f8dcf Use call_rcu to free peerinfo c36178c Introduce composite struct, gd_rcu_head [1]: http://www.rdrop.com/~paulmck/RCU/RCUdissertation.2004.07.14e1.pdf [2]: https://github.com/kshlm/glusterfs/tree/urcu Change-Id: Ic1480e59c86d41d25a6a3d159aa3e11fbb3cbc7b BUG: 1191030 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/9695 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Anand Nekkunti <anekkunt@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* geo-rep-cli: added a new option "no-verify" to geo-rep create.darshan n2015-03-121-17/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a new option called as "no-verify" to geo-rep create command. With no-verify option, following checks does not take place before session creation: * if ssh port 22 is open in slave * has proper passwordless ssh login setup * slave volume is created and is empty * if slave has enough memory This option is needed by ovirt-engine as the tasks done by push-pem is taken care by ovirt-engine and also the above checks are done. Thus creation of password-less ssh can be avoided when geo-replication is managed through ovirt. Usage: volume geo-replication [<VOLNAME>] [<SLAVE-URL>] { create [[no-verify]|[push-pem]] [force]| start [force]|stop [force]|pause [force]| resume [force]|config|status [detail]| delete } [options...] Change-Id: I975265f27d6434be5409438257d09cd4190c9159 BUG: 1198615 Signed-off-by: darshan n <dnarayan@redhat.com> Reviewed-on: http://review.gluster.org/9799 Reviewed-by: Aravinda VK <avishwan@redhat.com> Reviewed-by: Kotresh HR <khiremat@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* glusterd: create nfs volfile even when NFS is disabled on all volumesKrishnan Parthasarathi2015-03-111-1/+1
| | | | | | | | | | | | | | | | | | | | | This is required to determine if gluster-nfs daemon needs to be restarted. With http://review.gluster.org/9835 gluster-nfs volfile wouldn't be created if all volumes had nfs disabled before they were started even once. With the existing code, we wouldn't be able to determine if gluster-nfs needs to be restarted or reconfigured without the gluster-nfs volfile. This fix is ensure that we generate the gluster-nfs volfile even if it wouldn't be started, to honour the above requirement. Change-Id: I86c6707870d838b03dd4d14b91b984cb43c33006 BUG: 1199944 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/9851 Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Kaushal M <kaushal@redhat.com> Tested-by: Kaushal M <kaushal@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* snapshot: append timestamp with snapnameMohammed Rafi KC2015-03-101-19/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Appending GMT time stamp with snapname by default. If no-timestamp flag is given during snapshot creation, then time stamp will not append with snapname; Initial consumer of this feature is Samba's Shadow Copy feature. This feature allows Windows user to get previous revisions of a file. For this feature to work snapshot names under .snaps folder (USS) should have timestamp in following format appended: @GMT-YYYY.MM.DD-hh.mm.ss PS: https://www.samba.org/samba/docs/man/manpages/vfs_shadow_copy2.8.html This format is configurable by Samba conf file. Due to a limitation in Windows directory access the exact format cannot be used by USS. Therefore we have modified the file format to: _GMT-YYYY.MM.DD-hh.mm.ss Snapshot scheduling feature also required to append timestamp to the snapshot name therefore timestamp is appended in snapshot creation itself instead of doing the changes in snapview server. More info: https://www.mail-archive.com/gluster-users@gluster.org/msg18895.html Change-Id: Idac24670948cf4c0fbe916ea6690e49cbc832d07 BUG: 1189473 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/9597 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* mgmt/glusterd: Changes required for disperse volume heal commandsPranith Kumar K2015-03-105-153/+226
| | | | | | | | | | | | | - Include xattrop64-watchlist for index xlator for disperse volumes. - Change the functions that exist to consider disperse volumes also for sending commands to disperse xls in self-heal-daemon. Change-Id: Iae75a5d3dd5642454a2ebf5840feba35780d8adb BUG: 1177601 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/9793 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* cluster/ec: Add self-heal-daemon command handlersPranith Kumar K2015-03-093-22/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces the changes required in ec xlator to handle index/full heal. Index healer threads: Ec xlator start an index healer thread per local brick. This thread keeps waking up every minute to check if there are any files to be healed based on the indices kept in index directory. Whenever child_up event comes, then also this index healer thread wakes up and crawls the indices and triggers heal. When self-heal-daemon is disabled on this particular volume then the healer thread keeps waiting until it is enabled again to perform heals. Full healer threads: Ec xlator starts a full healer thread for the local subvolume provided by glusterd to perform full crawl on the directory hierarchy to perform heals. Once the crawl completes the thread exits if no more full heals are issued. Changed xl-op prefix GF_AFR_OP to GF_SHD_OP to make it more generic. Change-Id: Idf9b2735d779a6253717be064173dfde6f8f824b BUG: 1177601 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/9787 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Ravishankar N <ravishankar@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: don't start gluster-nfs when NFS is disabledKrishnan Parthasarathi2015-03-091-2/+28
| | | | | | | | | | Change-Id: Ic4da2a467a95af7108ed67954f44341131b41c7b BUG: 1199944 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/9835 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* mgmt/glusterd: Add bind-insecure optionPranith Kumar K2015-03-091-2/+8
| | | | | | | | | | | | Also deleted default values for disperse-self-heal-daemon and locks.trace Change-Id: Icc927d176aa10f06b40c114aa296b02dbad3a8ff BUG: 1187858 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/9516 Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* cluster/afr: Implementation of quorum-readsPranith Kumar K2015-03-051-0/+4
| | | | | | | | | | | Provide a way of disabling reads when quorum is not met. Change-Id: Ic4f57c2b87a0b8514600759de3a7a47e217fe3b5 BUG: 1187885 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/9543 Reviewed-by: Ravishankar N <ravishankar@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* glusterd: Start quotad before spawning bricks during glusterd restartAvra Sengupta2015-03-041-4/+8
| | | | | | | | | | | | Change-Id: I66edc1b98b70a494e069df95a6f347634c8f862d BUG: 1198076 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/9791 Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Vijaikumar Mallikarjuna <vmallika@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
generated by cgit (git 2.34.1) at 2024-05-27 02:41:45 +0000