summaryrefslogtreecommitdiffstats
path: root/xlators/mgmt/glusterd/src/glusterd.c
Commit message (Collapse)AuthorAgeFilesLines
* glusterd : introduce timer in mgmt_v3_lockGaurav Yadav2017-10-171-5/+23
| | | | | | | | | | | | | | | | Problem: In a multinode environment, if two of the op-sm transactions are initiated on one of the receiver nodes at the same time, there might be a possibility that glusterd may end up in stale lock. Solution: During mgmt_v3_lock a registration is made to gf_timer_call_after which release the lock after certain period of time Change-Id: I16cc2e5186a2e8a5e35eca2468b031811e093843 BUG: 1499004 Signed-off-by: Gaurav Yadav <gyadav@redhat.com>
* glusterd: introduce max-port rangeAtin Mukherjee2017-08-171-2/+15
| | | | | | | | | | | | | | | | | glusterd.vol file always had an option (commented out) to indicate the base-port to start the portmapper allocation. This patch brings in the max-port configuration where one can limit the range of ports which gluster can be allowed to bind. Fixes: #305 Change-Id: Id7a864f818227b9530a07e13d605138edacd9aa9 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: https://review.gluster.org/18016 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Prashanth Pai <ppai@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Gaurav Yadav <gyadav@redhat.com>
* glusterd: Gluster should keep PID file in correct locationGaurav Kumar Garg2017-08-111-0/+77
| | | | | | | | | | | | | | | | | | | | | | | Currently Gluster keeps process pid information of all the daemons and brick processes in Gluster configuration file directory (ie., /var/lib/glusterd/*). These pid files should be seperate from configuration files. Deletion of the configuration file directory might result into serious problems. Also, /var/run/gluster is the default placeholder directory for pid files. So, with this fix Gluster will keep all process pid information of all processes in /var/run/gluster/* directory. Change-Id: Idb09e3fccb6a7355fbac1df31082637c8d7ab5b4 BUG: 1258561 Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> Signed-off-by: Saravanakumar Arumugam <sarumuga@redhat.com> Reviewed-on: https://review.gluster.org/13580 Tested-by: MOHIT AGRAWAL <moagrawa@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* logging: localtime logging, cmdline, volume set optionKaleb S. KEITHLEY2017-08-031-0/+20
| | | | | | | | | | | | | | | | | Despite the fact that appliances generally use UTC, some users really want log entries in localtime. fixes gluster/glusterfs#272 feature page: https://review.gluster.org/17807 Change-Id: I5fbf2c3eedd9eb128fb3f851dd67b2f4081c8bba Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: https://review.gluster.org/16911 CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Samikshan Bairagya <samikshan@gmail.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* glusterd: Introduce option to limit no. of muxed bricks per processSamikshan Bairagya2017-07-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit introduces a new global option that can be set to limit the number of multiplexed bricks in one process. Usage: `# gluster volume set all cluster.max-bricks-per-process <value>` If this option is not set then multiplexing will happen for now with no limitations set; i.e. a brick process will have as many bricks multiplexed to it as possible. In other words the current multiplexing behaviour won't change if this option isn't set to any value. This commit also introduces a brick process instance that contains information about brick processes, like the number of bricks handled by the process (which is 1 in non-multiplexing cases), list of bricks, and port number which also serves as an unique identifier for each brick process instance. The brick process list is maintained in 'glusterd_conf_t'. Updates: #151 Change-Id: Ib987d14ab0a4f6034dac01b73a4b2839f7b0b695 Signed-off-by: Samikshan Bairagya <samikshan@gmail.com> Reviewed-on: https://review.gluster.org/17469 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* protocol/server: make listen backlog value as configurableMohammed Rafi KC2017-06-081-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | problem: When we call listen from protocol/server, we are giving a hard coded valie of 10 if it is not manually given. With multiplexing, especially when glusterd restarts all clients may try to connect to the server at a time. Which will result in overflowing the queue, and kernel will complain about the errors. Solution: This patch will introduce a volume set command to make backlog value as a configurable. This patch also changes the default values for backlog from 10 to 128. This changes is only applicable for sockets listening from protocol. Example: gluster volume set <volname> transport.listen-backlog 1024 Note: 1 Brick has to be restarted to get this value in effect 2 This changes won't be reflected in glusterd, or other xlators which calls listen. If you need, you have to add this option to the volfile. Change-Id: I0c5a2bbf28b5db612f9979e7560e05dd82b41477 BUG: 1456405 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: https://review.gluster.org/17411 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us>
* glusterfs: Not able to mount running volume after enable brick mux and ↵Mohit Agrawal2017-05-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | stopped any volume Problem: After enabled brick mux if any volume has down and then try ot run mount with running volume , mount command is hung. Solution: After enable brick mux server has shared one data structure server_conf for all associated subvolumes.After down any subvolume in some ungraceful manner (remove brick directory) posix xlator sends GF_EVENT_CHILD_DOWN event to parent xlatros and server notify updates the child_up to false in server_conf.When client is trying to communicate with server through mount it checks conf->child_up and it is FALSE so it throws message "translator are not yet ready". From this patch updated structure server_conf to save child_up status for xlator wise. Another improtant correction from this patch is cleanup threads from server side xlators after stop the volume. BUG: 1453977 Change-Id: Ic54da3f01881b7c9429ce92cc569236eb1d43e0d Signed-off-by: Mohit Agrawal <moagrawa@redhat.com> Reviewed-on: https://review.gluster.org/17356 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra Talur <rtalur@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us>
* glusterd: socketfile & pidfile related fixes for brick multiplexing featureMohit Agrawal2017-05-091-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: While brick-muliplexing is on after restarting glusterd, CLI is not showing pid of all brick processes in all volumes. Solution: While brick-mux is on all local brick process communicated through one UNIX socket but as per current code (glusterd_brick_start) it is trying to communicate with separate UNIX socket for each volume which is populated based on brick-name and vol-name.Because of multiplexing design only one UNIX socket is opened so it is throwing poller error and not able to fetch correct status of brick process through cli process. To resolve the problem write a new function glusterd_set_socket_filepath_for_mux that will call by glusterd_brick_start to validate about the existence of socketpath. To avoid the continuous EPOLLERR erros in logs update socket_connect code. Test: To reproduce the issue followed below steps 1) Create two distributed volumes(dist1 and dist2) 2) Set cluster.brick-multiplex is on 3) kill glusterd 4) run command gluster v status After apply the patch it shows correct pid for all volumes BUG: 1444596 Change-Id: I5d10af69dea0d0ca19511f43870f34295a54a4d2 Signed-off-by: Mohit Agrawal <moagrawa@redhat.com> Reviewed-on: https://review.gluster.org/17101 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Prashanth Pai <ppai@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd: Fix removing pmap entry on rpc disconnectPrashanth Pai2017-04-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Problem: The following line of code intended to remove pmap entry for the connection during disconnects: pmap_registry_remove (this, 0, NULL, GF_PMAP_PORT_NONE, xprt); However, no pmap entry will have it's type set to GF_PMAP_PORT_NONE at any point in time. So a call to pmap_registry_search_by_xprt() in pmap_registry_remove() will always fail to find a match. Fix: Optionally ignore pmap entry's type in pmap_registry_search_by_xprt(). BUG: 1193929 Change-Id: I705f101739ab1647ff52a92820d478354407264a Signed-off-by: Prashanth Pai <ppai@redhat.com> Reviewed-on: https://review.gluster.org/17129 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us>
* build: conditionally build legacy gNFS server and associated sub-packagingKaleb S. KEITHLEY2017-04-281-29/+6
| | | | | | | | | | | | | | | | | | | Plus some additional logic in glusterd to ensure gnfs (glusterfs) daemons are never started if server/nfs xlator is not installed. As a service, nfs is still initialized. The glusterfs-gnfs RPM may be installed or uninstalled independent of anything else, including on a system where gluster is actively running, so the existence of the xlator is always tested before trying to start gnfs. Change-Id: I56743ad1cb36a84917226d7d26cb9d015d441e66 BUG: 1326219 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: https://review.gluster.org/16958 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* xlator: do not call dlclose() when debuggingNiels de Vos2017-04-071-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Valgrind can not show the symbols if a .so after calling dlclose(). The unhelpful ??? in the output gets resolved properly with this change: ==25170== 344 bytes in 1 blocks are definitely lost in loss record 233 of 324 ==25170== at 0x4C29975: calloc (vg_replace_malloc.c:711) ==25170== by 0x52C7C0B: __gf_calloc (mem-pool.c:117) ==25170== by 0x12B0638A: ??? ==25170== by 0x528FCE6: __xlator_init (xlator.c:472) ==25170== by 0x528FE16: xlator_init (xlator.c:498) ==25170== by 0x52DA8D6: glusterfs_graph_init (graph.c:321) ==25170== by 0x52DB587: glusterfs_graph_activate (graph.c:695) ==25170== by 0x5046407: glfs_process_volfp (glfs-mgmt.c:79) ==25170== by 0x5043B9E: glfs_volumes_init (glfs.c:281) ==25170== by 0x5044FEC: glfs_init_common (glfs.c:986) ==25170== by 0x50451A7: glfs_init@@GFAPI_3.4.0 (glfs.c:1031) By not calling dlclose(), the dynamically loaded .so is still available upon program exit, and Valgrind is able to resolve the symbols. This will add an additional leak, so dlclose() is called for normal builds, but skipped when configuring with "./configure --enable-valgrind" or passing the "run-with-valgrind" xlator option. URL: http://valgrind.org/docs/manual/faq.html#faq.unhelpful Change-Id: I2044e21b1b8fcce32ad1a817fdd795218f967731 BUG: 1425623 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: https://review.gluster.org/16809 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Samikshan Bairagya <samikshan@gmail.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* glusterd: hold off volume deletes while still restarting bricksJeff Darcy2017-03-301-0/+1
| | | | | | | | | | | | | | | | We need to do this because modifying the volume/brick tree while glusterd_restart_bricks is still walking it can lead to segfaults. Without waiting we could accidentally "slip in" while attach_brick has released big_lock between retries and make such a modification. Change-Id: I30ccc4efa8d286aae847250f5d4fb28956a74b03 BUG: 1432542 Signed-off-by: Jeff Darcy <jeff@pl.atyp.us> Reviewed-on: https://review.gluster.org/16927 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* posix: Fix creation of files with S_ISVTX on FreeBSDXavier Hernandez2017-02-181-1/+1
| | | | | | | | | | | | | | | | | | | On FreeBSD the S_ISVTX flag is completely ignored when creating a regular file. Since gluster needs to create files with this flag set, specialy for DHT link files, it's necessary to force the flag. This fix does this by calling fchmod() after creating a file that must have this flag set. Change-Id: I51eecfe4642974df6106b9084a0b144835a4997a BUG: 1411228 Signed-off-by: Xavier Hernandez <xhernandez@datalab.es> Reviewed-on: https://review.gluster.org/16417 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* rpcsvc: Add rpchdr and proghdr to iobref before submitting to transportPoornima G2017-02-151-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Issue: When fio is run on multiple clients (each client writes to its own files), and meanwhile the clients does a readdirp, thus the client which did a readdirp will now recieve the upcalls. In this scenario the client disconnects with rpc decode failed error. RCA: Upcall calls rpcsvc_request_submit to submit the request to socket: rpcsvc_request_submit currently: rpcsvc_request_submit () { iobuf = iobuf_new iov = iobuf->ptr fill iobuf to contain xdrised upcall content - proghdr rpcsvc_callback_submit (..iov..) ... if (iobuf) iobuf_unref (iobuf) } rpcsvc_callback_submit (... iov...) { ... iobuf = iobuf_new iov1 = iobuf->ptr fill iobuf to contain xdrised rpc header - rpchdr msg.rpchdr = iov1 msg.proghdr = iov ... rpc_transport_submit_request (msg) ... if (iobuf) iobuf_unref (iobuf) } rpcsvc_callback_submit assumes that once rpc_transport_submit_request() returns the msg is written on to socket and thus the buffers(rpchdr, proghdr) can be freed, which is not the case. In especially high workload, rpc_transport_submit_request() may not be able to write to socket immediately and hence adds it to its own queue and returns as successful. Thus, we have use after free, for rpchdr and proghdr. Hence the clients gets garbage rpchdr and proghdr and thus fails to decode the rpc, resulting in disconnect. To prevent this, we need to add the rpchdr and proghdr to a iobref and send it in msg: iobref_add (iobref, iobufs) msg.iobref = iobref; The socket layer takes a ref on msg.iobref, if it cannot write to socket and is adding to the queue. Thus we do not have use after free. Thank You for discussing, debugging and fixing along: Prashanth Pai <ppai@redhat.com> Raghavendra G <rgowdapp@redhat.com> Rajesh Joseph <rjoseph@redhat.com> Kotresh HR <khiremat@redhat.com> Mohammed Rafi KC <rkavunga@redhat.com> Soumya Koduri <skoduri@redhat.com> Change-Id: Ifa6bf6f4879141f42b46830a37c1574b21b37275 BUG: 1421937 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: https://review.gluster.org/16613 Reviewed-by: Prashanth Pai <ppai@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: soumya k <skoduri@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* glusterd: add a cli command to trigger a statedump on a clientPoornima G2017-01-231-0/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With this, we will be able to trigger statedumps on remote Gluster clients, mainly targetted for applications using libgfapi. Design: SIGUSR signal is the most comman way of taking a statedump in Gluster. But it cannot be used for libgfapi based processes, as the process loading the library might have already consumed SIGUSR signal. Hence going by the command way. One has to issue a Gluster command to initiate a statedump on the libgfapi based client. The command takes hostname and PID as an argument. All the glusterds in the cluster, check if they are connected to the specified hostname, and send an RPC request to all the connected clients from that hostname (via the mgmt connection). URL: http://review.gluster.org/16357 Change-Id: Icbe4d2f026b32a2c7d5535e1bfb2cdaaff042e91 BUG: 1169302 Signed-off-by: Poornima G <pgurusid@redhat.com> [ndevos: minor fixes and split patch in smaller pieces] Reviewed-on: https://review.gluster.org/9228 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Niels de Vos <ndevos@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Samikshan Bairagya <samikshan@gmail.com>
* geo-rep: Separate slave mount logs for each connectionKotresh HR2017-01-181-3/+3
| | | | | | | | | | | | | | | | | | | | | Geo-rep worker mounts the slave volume on the slave node. If multiple worker connects to same slave node, all workers share the same mount log file. This is very difficult to debug as logs are cluttered from different mounts. Hence creating separate mount log file for each connection from worker. Each connection from worker is identified uniquely using 'mastervol uuid', 'master host', 'master brickpath', 'salve vol'. The log file name will be combination of the above. Change-Id: I67871dc8e8ea5864e2ad55e2a82063be0138bf0c BUG: 1412689 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/16384 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Aravinda VK <avishwan@redhat.com>
* glusterd: Get maximum supported op-version in a clusterSamikshan Bairagya2017-01-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | gluster volume get <VOLNAME> cluster.opversion gives us the current op-version on which the cluster is operating. There is no command that lets the user know the maximum supported op-version that the cluster can run on. This patch adds a new global option cluster.max-op-version, that can be used to retrieve the maximum supported op-version in a cluster. Usage: # gluster volume get all cluster.max-op-version Example output: Option Value ------ ----- cluster.max-op-version 30900 NOTE: The only way to test this feature for now is to set the GD_OP_VERSION_MAX macro to different values (30800 for 3.8,30900 for 3.9, and so on) and rebuild glusterd. Since the regression test framework currently doesn't have support to simulate these tests, there are no accompanying regression tests for this feature. It should be possible to add tests once glusto comes in and makes it easier to run a heterogeneous cluster. Change-Id: I547480ee5e7912664784643e436feb198b6d16d0 BUG: 1365822 Signed-off-by: Samikshan Bairagya <samikshan@gmail.com> Reviewed-on: http://review.gluster.org/16283 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd : Introduce reset brickAnuradha Talur2016-08-291-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The command basically allows replace brick with src and dst bricks as same. Usage: gluster v reset-brick <volname> <hostname:brick-path> start This command kills the brick to be reset. Once this command is run, admin can do other manual operations that they need to do, like configuring some options for the brick. Once this is done, resetting the brick can be continued with the following options. gluster v reset-brick <vname> <hostname:brick> <hostname:brick> commit {force} Does the job of resetting the brick. 'force' option should be used when the brick already contains volinfo id. Problem: On doing a disk-replacement of a brick in a replicate volume the following 2 scenarios may occur : a) there is a chance that reads are served from this replaced-disk brick, which leads to empty reads. b) potential data loss if next writes succeed only on replaced brick, and heal is done to other bricks from this one. Solution: After disk-replacement, make sure that reset-brick command is run for that brick so that pending markers are set for the brick and it is not chosen as source for reads and heal. But, as of now replace-brick for the same brick-path is not allowed. In order to fix the above mentioned problem, same brick-path replace-brick is needed. With this patch reset-brick commit {force} will be allowed even when source and destination <hostname:brickpath> are identical as long as 1) destination brick is not alive 2) source and destination brick have the same brick uuid and path. Also, the destination brick after replace-brick will use the same port as the source brick. Change-Id: I440b9e892ffb781ea4b8563688c3f85c7a7c89de BUG: 1266876 Signed-off-by: Anuradha Talur <atalur@redhat.com> Reviewed-on: http://review.gluster.org/12250 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Ashish Pandey <aspandey@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* glusterd: fix unused variable warnings/errorsKaleb S. KEITHLEY2016-08-291-6/+0
| | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a/the "leak" - via the generated rpc/xdr headers - of pragmas that mask these warnings. However 14085 won't pass the smoke test until all the warnings are fixed. Change-Id: Id6f7555e35fd2bc37e8b9f81ac37d5384624501c BUG: 1369124 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15285 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Prashanth Pai <ppai@redhat.com>
* glusterd: Fix gsyncd upgrade issueKotresh HR2016-07-131-2/+59
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: gluster upgrade is not generating new volfiles Cause: During upgrade, "glusterd --xlator-option *.upgrade=on -N" is run to generate new volfiles. It is run post 'glusterfs' rpm installation. The above command fails during upgrade if geo-replication is installed. This is because on glusterd start 'gsyncd' binary is called to configure geo-replication related stuff. Since 'glusterfs' rpm is installed prior to 'geo-rep' rpm, the 'gsyncd' binary used to glusterd upgrade command is of old version and hence it fails before generating new volfiles. Solution: Don't call geo-replication configure during upgrade/downgrade. Geo-replication configuration happens during start of glusterd after upgrade. Change-Id: Id58ea44ead9f69982f86fb68dc5b9ee3f6cd11a1 BUG: 1355628 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/14898 Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* glusterd: spawn daemons from init() on a single or two node setupAtin Mukherjee2016-07-051-6/+5
| | | | | | | | | | | | | | | | | Allow glusterd to spawn the daemons at the time of initialization when peer count is less than 2. This is required if user wants to set up a two node cluster with out server side quorum and want the bricks to come up on a node where the other node is down, however the behaviour will be overriden when server side quorum is enabled. Change-Id: I21118e996655822467eaf329f638eb9a8bf8b7d5 BUG: 1352277 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/14848 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* glusterd/geo-rep: slave volume uuid to identify a geo-rep sessionSaravanakumar Arumugam2016-05-121-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: Currently, it is possible to create multiple geo-rep session from the Master host to Slave host(s), where Slave host(s) belonging to the same volume. For example: Consider Master Host M1 having volume tv1 and Slave volume tv2, which spans across two Slave hosts S1 and S2. Currently, it is possible to create geo-rep session from M1(tv1) to S1(tv2) as well as from M1(tv1) to S2(tv2). When the Slave Host is alone modified, it is identified as a new geo-rep session (as slave host and slave volume together are identifying Slave side). Also, it is possible to create both root and non-root geo-rep session between same Master volume and Slave volume. This should also be avoided. Solution: This multiple geo-rep session creation must be avoided and in order to avoid, use Slave volume uuid to identify a Slave. This way, we can identify whether a session is already created for the same Slave volume and avoid creating again (using different host). When the session creation is forced in the above scenario, rename the existing geo-rep session directory with new Slave Host mentioned. Change-Id: I9239759cbc0d15dad63c48b8cf62950bb687c7c8 BUG: 1294813 Signed-off-by: Saravanakumar Arumugam <sarumuga@redhat.com> Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/13111 Reviewed-by: Kotresh HR <khiremat@redhat.com> Tested-by: Kotresh HR <khiremat@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* glusterd: register rpc notification for unix socketsvmallika2016-01-281-15/+2
| | | | | | | | | | | | | | | | | | | Previously only CLI was using unix socket to connect to glusterd, and there was no need to register rpc callback notifications. Now auxiliary mount process is started with unix socket option. So we need to register register rpc notifications for unix sockets as well. Change-Id: I985839fc91c5c2674d85a7ec94ae24f47898c22d BUG: 1295763 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/13174 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* core: use syscall wrappers instead of direct syscalls -- glusterdKaleb S. KEITHLEY2015-10-281-23/+23
| | | | | | | | | | | | | | | various xlators and other components are invoking system calls directly instead of using the libglusterfs/syscall.[ch] wrappers. If not using the system call wrappers there should be a comment in the source explaining why the wrapper isn't used. Change-Id: I28bf2a5f7730b35914e7ab57fed91e1966b30073 BUG: 1267967 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/12379 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* Tiering: change in status for remove brick and rebalancehari gowtham2015-09-211-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | when we trigger a detach tier start on a tier vol, it shows in the volume status task as "remove brick" instead of "Detach tier" Status of volume: vol1 Gluster process TCP Port RDMA Port Online Pid ------------------------------------------------------------------------------ Hot Bricks: Brick 10.70.42.171:/data/gluster/hbr1 49154 0 Y 25098 Cold Bricks: Brick 10.70.42.171:/data/gluster/p1 49152 0 Y 25101 Brick 10.70.42.171:/data/gluster/p2 49153 0 Y 25112 NFS Server on localhost N/A N/A N N/A Task Status of Volume vol1 ------------------------------------------------------------------------------ Task : Tier migrate ID : e11d5a3d-b1ae-4c3f-8f95-b28993c60939 Status : in progress Status of volume: vol1 Gluster process TCP Port RDMA Port Online Pid ------------------------------------------------------------------------------ Hot Bricks: Brick 10.70.42.171:/data/gluster/hbr1 49154 0 Y 25098 Cold Bricks: Brick 10.70.42.171:/data/gluster/p1 49152 0 Y 25101 Brick 10.70.42.171:/data/gluster/p2 49153 0 Y 25112 NFS Server on localhost N/A N/A N N/A Task Status of Volume vol1 ------------------------------------------------------------------------------ Task : Detach tier ID : 76d700b1-5bbd-43ed-95fd-1640b2b4af31 Status : completed Change-Id: I4bd3b340d4e700e8afed00e1478b8a8b54dfe2e2 BUG: 1261837 Signed-off-by: hari gowtham <hgowtham@redhat.com> Signed-off-by: Hari Gowtham <hgowtham@redhat.com> Reviewed-on: http://review.gluster.org/12149 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Tested-by: Dan Lambright <dlambrig@redhat.com>
* all: reduce "inline" usageJeff Darcy2015-09-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | There are three kinds of inline functions: plain inline, extern inline, and static inline. All three have been removed from .c files, except those in "contrib" which aren't our problem. Inlines in .h files, which are overwhelmingly "static inline" already, have generally been left alone. Over time we should be able to "lower" these into .c files, but that has to be done in a case-by-case fashion requiring more manual effort. This part was easy to do automatically without (as far as I can tell) any ill effect. In the process, several pieces of dead code were flagged by the compiler, and were removed. Change-Id: I56a5e614735c9e0a6ee420dab949eac22e25c155 BUG: 1245331 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/11769 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* glusterd: initialize the daemon services on demandAtin Mukherjee2015-07-271-54/+13
| | | | | | | | | | | | | | | | | | | | | | As of now all the daemon services are initialized at glusterD init path. Since socket file path of per node daemon demands the uuid of the node, MY_UUID macro is invoked as part of the initialization. The above flow breaks the usecases where a gluster image is built following a template could be Dockerfile, Vagrantfile or any kind of virtualization environment. This means bringing instances of this image would have same UUIDs for the node resulting in peer probe failure. Solution is to lazily initialize the services on demand. Change-Id: If7caa533026c83e98c7c7678bded67085d0bbc1e BUG: 1238135 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/11488 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Gaurav Kumar Garg <ggarg@redhat.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* rpc,server,glusterd: Init transport list for accepted transportKaushal M2015-07-241-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | GlusterD or a brick would crash when encrypted transport was enabled and an unencrypted client tried to connect to them. The crash occured when GlusterD/server tried to remove the transport from their xprt_list due to a DISCONNECT event. But as the client transport's list head wasn't inited, the process would crash when list_del was performed. Initing the client transports list head during acceptence, prevents this crash. Also, an extra check has been added to the GlusterD and Server notification handlers for client DISCONNECT events. The handlers will now first check if the client transport is a member of any list. GlusterD and Server DISCONNECT event handlers could be called without the ACCEPT handler, which adds the transport to the list, being called. This situation also occurs when an unencrypted client tries to establish a connection with an encrypted server. Change-Id: Icc24a08d60e978aaa1d3322e0cbed680dcbda2b4 BUG: 1243774 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/11692 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* glusterd: use 2 epoll worker threads by defaultKrishnan Parthasarathi2015-07-161-0/+21
| | | | | | | | | | | | | | | The no. of epoll worker threads can be configured by adding the following option into glusterd.vol. option event-threads <NUM-OF-EPOLL_WORKERS> BUG: 1242421 Change-Id: I2a9e2d81c64beaf54872081f9ce45355cf4dfca7 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/11630 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* glusterd: Fix management encryption issues with GlusterDKaushal M2015-07-091-8/+5
| | | | | | | | | | | | | | | | | | | | | | | | | Management encryption was enabled incorrectly in GlusterD leading to issues of cluster deadlocks. This has been fixed with this commit. The fix is in two parts, 1. Correctly enable encrytion for the TCP listener in GlusterD and re-enable own-threads for encrypted connections. Without this, GlusterD could try to esatblish the blocking SSL connects in the epoll thread, for eg. when handling friend updates, which could lead to cluster deadlocks. 2. Explicitly enable encryption for outgoing peer connections. Without enabling encryption explicitly for outgoing connections was causing SSL socket events to be handled in the epoll thread. Some events, like disconnects during peer detach, could lead to connection attempts to happen in the epoll thread, leading to deadlocks again. Change-Id: I438c2b43f7b1965c0e04d95c000144118d36272c BUG: 1240564 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/11559 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com>
* glusterd/shared_storage: Use /var/lib/glusterd/ss_brick as shared storage's ↵Avra Sengupta2015-07-061-7/+3
| | | | | | | | | | | | | | | | | | | | | | | brick The brick path we use to create shared storage is /var/run/gluster/ss_brick. The problem with using this brick path is /var/run/gluster is a tmpfs and all the brick/shared storage data will be wiped off when the node restarts. Hence using /var/lib/glusterd/ss_brick as the brick path for shared storage volume as this brick and the shared storage volume is internally created by us (albeit on user's request), and contains only internal state data and no user data. Change-Id: I808d1aa3e204a5d2022086d23bdbfdd44a2cfb1c BUG: 1218573 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/11533 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* glusterd: Porting left out log messages to new frameworkNandaja Varma2015-06-261-29/+39
| | | | | | | | | | | Change-Id: I70d40ae3b5f49a21e1b93f82885cd58fa2723647 BUG: 1235538 Signed-off-by: Nandaja Varma <nandaja.varma@gmail.com> Reviewed-on: http://review.gluster.org/11388 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Anand Nekkunti <anekkunt@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* rebalance,store,glusterd/glusterd: porting to new logging frameworkNandaja Varma2015-06-151-72/+136
| | | | | | | | | | | Change-Id: I231b79e3414e60fe67cde577dd585cce83c8bfad BUG: 1194640 Signed-off-by: Nandaja Varma <nandaja.varma@gmail.com> Reviewed-on: http://review.gluster.org/9877 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Sachin Pandit <spandit@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd: Stop tcp/ip listeners during glusterd exitanand2015-06-071-3/+45
| | | | | | | | | | | | | | | | Problem : Because of race between exit thread and rpc thread causing the glusterd crash while glusterd exiting/stoping. Fix : Stop tcp/ip socket listeners in cleanup_and_exit to avoid new rpc events. Change-Id: Ie9280c8c9d7c350a176529375d861432f3de94ac BUG: 1209461 Signed-off-by: anand <anekkunt@redhat.com> Reviewed-on: http://review.gluster.org/10197 Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Kaushal M <kaushal@redhat.com>
* glusterd/shared_storage: Provide a volume set option to create and mount the ↵Avra Sengupta2015-06-041-33/+74
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | shared storage Introducing a global volume set option(cluster.enable-shared-storage) which helps create and set-up the shared storage meta volume. gluster volume set all cluster.enable-shared-storage enable On enabling this option, the system analyzes the number of peers in the cluster, which are currently connected, and chooses three such peers(including the node the command is issued from). From these peers a volume(gluster_shared_storage) is created. Depending on the number of peers available the volume is either a replica 3 volume(if there are 3 connected peers), or a replica 2 volume(if there are 2 connected peers). "/var/run/gluster/ss_brick" serves as the brick path on each node for the shared storage volume. We also mount the shared storage at "/var/run/gluster/shared_storage" on all the nodes in the cluster as part of enabling this option. If there is only one node in the cluster, or only one node is up then the command will fail Once the volume is created, and mounted the maintainance of the volume like adding-bricks, removing bricks etc., is expected to be the onus of the user. On disabling the option, we provide the user a warning, and on affirmation from the user we stop the shared storage volume, and unmount it from all the nodes in the cluster. gluster volume set all cluster.enable-shared-storage disable Change-Id: Idd92d67b93f444244f99ede9f634ef18d2945dbc BUG: 1222013 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/10793 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com>
* build: do not #include "config.h" in each fileNiels de Vos2015-05-291-4/+0
| | | | | | | | | | | | | | | | | | Instead of including config.h in each file, and have the additional config.h included from the compiler commandline (-include option). When a .c file tests for a certain #define, and config.h was not included, incorrect assumtions were made. With this change, it can not happen again. BUG: 1222319 Change-Id: I4f9097b8740b81ecfe8b218d52ca50361f74cb64 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/10808 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* libglusterfs: Implementation of sync lock as recursive lock to avoid crash.anand2015-04-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | Problem : In glusterd,we are using big lock which is implemented based on sync task frame work for thread synchronization and rcu lock for data consistency. sync task frame work swap the threads if there is no worker poll threads available,due to this rcu lock and rcu unlock was happening in different threads (urcu-bp will not allow this),resulting into glusterd crash. fix : To avoid releasing the sync lock(big lock) in between rcu critical section,implemented sync lock as recursive lock. More details: link : http://www.spinics.net/lists/gluster-devel/msg14632.html Change-Id: I2b56c1caf3f0470f219b1adcaf62cce29cdc6b88 BUG: 1211640 Signed-off-by: anand <anekkunt@redhat.com> Reviewed-on: http://review.gluster.org/10285 Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: Store ping-timeout in glusterd conf in memoryAtin Mukherjee2015-04-141-0/+5
| | | | | | | | | | | | | As of now glusterd_conf_t's ping-timeout was of no use and hence statedump was not reflecting correct ping-timeout value configured in glusterd.vol Change-Id: I76ba7b721264565751538c7fcdcb801a28317581 BUG: 1210627 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/10191 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* build: make contrib/uuid dependency optionalNiels de Vos2015-04-101-1/+1
| | | | | | | | | | | | | | | | | | | On Linux systems we should use the libuuid from the distribution and not bundle and statically link the contrib/uuid/ bits. libglusterfs/src/compat-uuid.h has been introduced and should become an abstraction layer for different UUID APIs. Non-Linux operating systems should implement their compatibility layer there. Once all operating systems have an implementation in compat-uuid.h, we can remove contrib/uuid/ from the repository completely. Change-Id: I345e5357644be2521685e00358bb8c83c4ea0577 BUG: 1206587 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/10129 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Avoid conflict between contrib/uuid and system uuidEmmanuel Dreyfus2015-04-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | glusterfs relies on Linux uuid implementation, which API is incompatible with most other systems's uuid. As a result, libglusterfs has to embed contrib/uuid, which is the Linux implementation, on non Linux systems. This implementation is incompatible with systtem's built in, but the symbols have the same names. Usually this is not a problem because when we link with -lglusterfs, libc's symbols are trumped. However there is a problem when a program not linked with -lglusterfs will dlopen() glusterfs component. In such a case, libc's uuid implementation is already loaded in the calling program, and it will be used instead of libglusterfs's implementation, causing crashes. A possible workaround is to use pre-load libglusterfs in the calling program (using LD_PRELOAD on NetBSD for instance), but such a mechanism is not portable, nor is it flexible. A much better approach is to rename libglusterfs's uuid_* functions to gf_uuid_* to avoid any possible conflict. This is what this change attempts. BUG: 1206587 Change-Id: I9ccd3e13afed1c7fc18508e92c7beb0f5d49f31a Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/10017 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* geo-rep: Copy geo-rep hook-script during source installKotresh HR2015-04-021-9/+10
| | | | | | | | | | | | | | | | | The hook-script S56glusterd-geo-rep-create-post.sh was not copying to glusterd working directory when geo-rep is installed through source. Hence the geo-rep create fails unless the script is manually copied. This patch addresses the issue by copying the hook-script during make install. Change-Id: I185a877ed720e8300f0e888ab481d0c8c23bf815 BUG: 1207201 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/10051 Reviewed-by: Aravinda VK <avishwan@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* geo-rep: Add support for aclsKotresh HR2015-03-301-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for ACLS. When it sees SETXATTR in Changelog, it adds the file to data queue. rsync/tar+ssh will take care of syncing ACLS. User set ACLS will be synced to Slave. This requires "system.posix_acl_access" to go through when client-pid is equal GF_CLIENT_PID_GSYNCD in fuse layer. New config interface is introduced, sync-acls Which can be set using geo-rep config(Default is True) gluster volume geo-replication <VOLUME> <SLAVEHOST>::<SLAVEVOL> \ config sync-acls false Change-Id: I7eb3523fa72b8fed830efc98138891244e830d65 BUG: 1187021 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/10001 Reviewed-by: Aravinda VK <avishwan@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* glusterd: clean up global xaction_peer occurancesAtin Mukherjee2015-03-261-1/+0
| | | | | | | | | | | | | | With http://review.gluster.org/#/c/9972/ there is no more need to maintain xaction_peers in glusterd_conf_t. This patch cleans up code for all the occurances of xaction_peers. Change-Id: I4fbf2df0fa9b8a8751029be36be7f76f6464cc76 BUG: 1204727 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/9980 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* cli/glusterd: CLI interface for BitRot detectionVenky Shankar2015-03-241-0/+17
| | | | | | | | | | | | | | | | * BitRot enable/disable CLI per volume * Volfile generation for Scrubber * Relevant glusterd infrastructure Change-Id: I1212af63f93ecc52b22ee6da920e1664f66a1e39 BUG: 1170075 Original-Author: Raghavendra Bhat <raghavendra@redhat.com> Original-Author: Venky Shankar <vshankar@redhat.com> Original-Author: Gaurav Kumar Garg <ggarg@redhat.com> Original-Author: Anand Nekkunti <anekkunt@redhat.com> Reviewed-on: http://review.gluster.org/9986 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* mgmt/glusterd: generate volfile for BitDVenky Shankar2015-03-241-0/+20
| | | | | | | | | | | | | | * Implement the skeleton of bit-rot xlator. Original-Author: Raghavendra Bhat <raghavendra@redhat.com> Signed-off-by: Venky Shankar <vshankar@redhat.com> Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> Signed-off-by: Anand Nekkunti <anekkunt@redhat.com> Change-Id: If33218bdc694f5f09cb7b8097c4fdb74d7a23b2d BUG: 1170075 Reviewed-on: http://review.gluster.org/9710 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: Replace libglusterfs lists with liburcu listsKaushal M2015-03-031-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch replaces usage of the libglusterfs lists data structures and API in glusterd with the lists data structures and API from liburcu. The liburcu data structes and APIs are a drop-in replacement for libglusterfs lists. All usages have been changed to keep the code consistent, and free from confusion. NOTE: glusterd_conf_t->xprt_list still uses the libglusterfs data structures and API, as it holds rpc_transport_t objects, which is not a part of glusterd and is not being changed in this patch. This change was developed on the git branch at [1]. This commit is a combination of the following commits on the development branch. 6dac576 Replace libglusterfs lists with liburcu lists a51b5ab Fix compilation issues d98a06f Fix merge issues a5d918e Remove merge remnant 1cca113 More style cleanup 1917be3 Address review comments on 9624/1 8d10f13 Use cds_lists for glusterd_svc_t 524ad5d Add rculist header in glusterd-conn-helper.c 646f294 glusterd: add list_add_order API honouring rcu [1]: https://github.com/kshlm/glusterfs/tree/urcu Change-Id: Ic613c5b6e496a677b9d3de15fc042a0492109fb0 BUG: 1191030 Signed-off-by: Kaushal M <kaushal@redhat.com> Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/9624 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Gaurav Kumar Garg <ggarg@redhat.com> Reviewed-by: Anand Nekkunti <anekkunt@redhat.com>
* glusterd: nfs,shd,quotad,snapd daemons refactoringAtin Mukherjee2015-02-201-9/+66
| | | | | | | | | | | | | This patch ports nfs, shd, quotad & snapd with the approach suggested in http://www.gluster.org/pipermail/gluster-devel/2014-December/043180.html Change-Id: I4ea5b38793f87fc85cc9d2cf873727351dedffd2 BUG: 1191486 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/9428 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Nekkunti <anekkunt@redhat.com>
* rdma: reduce log level from E to WMohammed Rafi KC2015-02-171-0/+22
| | | | | | | | | | | | | | glusterd process, when try to initialize default vol file, will always through an error if there is no rdma device. Changing the log levels and log messages to more appropriately. Change-Id: I75b919581c6738446dd2d5bddb7b7658a91efcf4 BUG: 1188232 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/9559 Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com>
* glusterd/geo-rep: Allow replace/remove brick if geo-rep is stopped.Kotresh HR2015-02-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Replace brick: If geo-replication was configured on a volume, replace brick used to fail. This patch allows replace brick to go through if all geo-rep sessions corresponding to that volume is stopped. Remove brick: There was no check for geo-replication for remove brick. Enforce 'remove brick commit' to fail if geo-rep session corresponding to volume is running. Allow 'remove brick commit' only if all of the geo-rep sessions corresponding to that volume is stopped. Code is re-organized for better readability. Change-Id: I02282c2764d8b81e319489c977847e6e437511a4 BUG: 1179638 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/9402 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Aravinda VK <avishwan@redhat.com> Reviewed-by: ajeet jha <ajha@redhat.com> Reviewed-by: Avra Sengupta <asengupt@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* rpc: initialise transport's list on creationKrishnan Parthasarathi2015-01-151-1/+0
| | | | | | | | | | | | | | Initialising the transport's list, meant to hold clients connected to it, on the first connection event is prone to race, especially with the introduction of multi-threaded event layer. BUG: 1181203 Change-Id: I6a20686a2012c1f49a279cc9cd55a03b8c7615fc Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/9413 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com>
generated by cgit (git 2.34.1) at 2024-05-27 15:16:37 +0000