summaryrefslogtreecommitdiffstats
path: root/xlators/mgmt/glusterd/src/glusterd-volgen.c
Commit message (Collapse)AuthorAgeFilesLines
...
* gfproxyd: Let glusterd manage gfproxy daemonPoornima G2017-10-181-51/+40
| | | | | | | Updates: #242 BUG: 1428063 Change-Id: Iaaf2edf99b2ecc75f6d30762c752a6d445c1c826 Signed-off-by: Poornima G <pgurusid@redhat.com>
* gfproxy: Introduce new server-side daemon called GFProxyShreyas Siravara2017-10-101-20/+257
| | | | | | | | | | | | | | Summmary: Adds a new server-side daemon called gfproxyd & a new FUSE client called gfproxy-client Updates: #242 BUG: 1428063 Change-Id: I83210098d3a381922bc64fed1110ae1b76e6519f Tested-by: Shreyas Siravara <sshreyas@fb.com> Reviewed-by: Kevin Vigor <kvigor@fb.com> Signed-off-by: Shreyas Siravara <sshreyas@fb.com> Signed-off-by: Poornima G <pgurusid@redhat.com>
* glusterd : fix client io-threads option for replicate volumesRavishankar N2017-10-091-10/+18
| | | | | | | | | | | | | | | | | | | Problem: Commit ff075a3d6f9b142911d25c27fd209838782bfff0 disabled loading client-io-threads for replicate volumes (it was set to on by default in commit e068c1997314046658dd502e9118dab32decf879) due to performance issues but in doing so, inadvertently failed to load the xlator even if the user explicitly enabled the option using the volume set command. This was despite returning returning sucess for the volume set. Fix: Modify the check in perfxl_option_handler() and add checks in volume create/add-brick/remove-brick code paths, tying it all to GD_OP_VERSION_3_12_2. Change-Id: Ib612973a999a7da818cc926f5c2601b1f0794fcf BUG: 1498570 Signed-off-by: Ravishankar N <ravishankar@redhat.com>
* debug/delay-gen: Implement delay-generation featurePranith Kumar K2017-08-311-24/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Background: I was working on a customer issue where the disks were responding some times after seconds. It was becoming very difficult to recreate the issues in our labs, so had to come up with this feature. Requirements: We need an xlator which can delay x% of ops for y micro seconds. We should be able to enable delays for specific fops. This feature is modeled after error-gen. Most of the logic is borrowed from that xlator. This is a minimum implementation of the feature which satisfied the requirements I had. May be in future with more requirements and understanding of the problem further we can improve upon this implementation. Here are the commands and what they do: Enable delay-gen: (This is similar to how err-gen is enabled on the brick side) - gluster volume set <volname> delay-gen posix Set the percentage of fops that need to be delayed - gluster volume set <volname> delay-gen.delay-percentage 50 Default is 10% Set the delay in micro seconds - gluster volume set <volname> delay-gen.delay-duration 500000 Default is 100000 Set comma separated fops to be delayed - gluster v set r2 delay-gen.enable read,write Default is all fops. Fixes #257 Change-Id: Ib547bd39cc024c9cdb63754d21e3aa62fc9d6473 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: https://review.gluster.org/17591 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us>
* libglusterfs: Add new fields to volume_options structKaushal M2017-08-291-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The new fields are required to enable equivalent volume set and volgen features, and some more additional features in GD2. GD2 does not use a hard-coded volume options map like GD1, but builds such by reading the options tables directly from the xlators. The new fields being introduced into the volume options struct include the following, - op-version - version(s) the option was introduced in - deprecated - version(s) the option was deprecated in - flags - flags for the option (settable, client, global, force, doc etc.) - tags - descriptive tags that apply to this option, can be used to group options - validate_fn - custom option validation function Enums for currently available flags have also been defined. To avoid a naming clashes, the flag enums in GD1 have been renamed. Updates #302 Change-Id: Ic7e08aef9e051beb47e8dc17d7f7be211aed308a Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: https://review.gluster.org/18059 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Amar Tumballi <amarts@redhat.com>
* glusterd: do not create .glusterfs/indicesPrashanth Pai2017-08-231-2/+2
| | | | | | | | | | | | | | | | | | | | | glusterd shouldn't concern itself with creating directories specific to certain xlators. The index xlator will now proceed creating './glusterfs/indices' dir only if the parent '.glusterfs' directory exists, which still fixes the original problem reported i.e 'volume start force' command shouldn't create brick path if it doesn't exist (BUG 1457202) This reverts most of the changes done by the commit b58a15948fb3fc37b6c0b70171482f50ed957f42 Change-Id: I7fc52ad64dce220e336c218fb4d85933ca2e61c0 Signed-off-by: Prashanth Pai <ppai@redhat.com> Reviewed-on: https://review.gluster.org/18003 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* glusterd: disallow volume specific options to be set with all as volume nameAtin Mukherjee2017-08-181-0/+8
| | | | | | | | | | | | | | | | All the .validate_fn defined in volume map entry table refers to volinfo object. And if we end up in trying to set a volume level option cluster wide glusterd results into a crash. Change-Id: I7c877aee0ff5c8c1d8c95662fdc8c8923355ae7b BUG: 1482344 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: https://review.gluster.org/18052 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Prashanth Pai <ppai@redhat.com> Reviewed-by: mohammed rafi kc <rkavunga@redhat.com> Reviewed-by: Gaurav Yadav <gyadav@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* glusterd: Fix the debug and error-gen turned on issueRyan Ding2017-08-161-0/+2
| | | | | | | | | | | | | | | | | | | | | Problem: When enabling one of the debug or the error-gen xlator, both of them will be turned on together. The problem is that when adding debug xlators into the graph, its on/off status is ignored to be checked. Fix: When adding a debug xlator, check its status and skip those with a value of "off". Change-Id: Ifa79314ff337b60ee941cfb0308c1ccbe42d027f BUG: 1395492 Signed-off-by: Zhang Huan <zhanghuan@open-fs.com> Reviewed-on: https://review.gluster.org/15849 Tested-by: Atin Mukherjee <amukherj@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* logging: localtime logging, cmdline, volume set optionKaleb S. KEITHLEY2017-08-031-0/+30
| | | | | | | | | | | | | | | | | Despite the fact that appliances generally use UTC, some users really want log entries in localtime. fixes gluster/glusterfs#272 feature page: https://review.gluster.org/17807 Change-Id: I5fbf2c3eedd9eb128fb3f851dd67b2f4081c8bba Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: https://review.gluster.org/16911 CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Samikshan Bairagya <samikshan@gmail.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* posix: option to handle the shared bricks for statvfs()Amar Tumballi2017-07-241-0/+4
| | | | | | | | | | | | | | | | | | | | Currently 'storage/posix' xlator has an option called option `export-statfs-size no`, which exports zero as values for few fields in `struct statvfs`. In a case of backend brick shared between multiple brick processes, the values of these variables should be `field_value / number-of-bricks-at-node`. This way, even the issue of 'min-free-disk' etc at different layers would also be handled properly when the statfs() sys call is made. Fixes #241 Change-Id: I2e320e1fdcc819ab9173277ef3498201432c275f Signed-off-by: Amar Tumballi <amarts@redhat.com> Reviewed-on: https://review.gluster.org/17618 CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* index: Do not proceed with init if brick is not mountedRavishankar N2017-06-191-2/+3
| | | | | | | | | | | | | | | | | | | | | ..or else when a volume start force is given, we end up creating /brick-path/.glusterfs/indices folder and various subdirs under it and eventually starting the brick process. As a part of this patch, glusterd_get_index_basepath() is added in glusterd, who will then use it to create the basepath during volume-create, add-brick, replace-brick and reset-brick. It also uses this function to set the 'index-base' xlator option for the index translator. Change-Id: Id018cf3cb6f1e2e35b5c4cf438d1e939025cb0fc BUG: 1457202 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: https://review.gluster.org/17426 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* SELinux : implementation of SELinux translatorManikandan Selvaganesh2017-05-031-5/+25
| | | | | | | | | | | | | | | | | | | | The patch implement a part of SELinux translator to support setting SELinux contexts on files in a glusterfs volume. URL: https://github.com/gluster/glusterfs-specs/blob/master/accepted/SELinux-client-support.md Change-Id: Id8916bd8e064ccf74ba86225ead95f86dc5a1a25 BUG: 1318100 Fixes : #55 Signed-off-by: Manikandan Selvaganesh <mselvaga@redhat.com> Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: https://review.gluster.org/13762 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Manikandan Selvaganesh <manikandancs333@gmail.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* Halo Replication feature for AFR translatorKevin Vigor2017-05-021-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Summary: Halo Geo-replication is a feature which allows Gluster or NFS clients to write locally to their region (as defined by a latency "halo" or threshold if you like), and have their writes asynchronously propagate from their origin to the rest of the cluster. Clients can also write synchronously to the cluster simply by specifying a halo-latency which is very large (e.g. 10seconds) which will include all bricks. In other words, it allows clients to decide at mount time if they desire synchronous or asynchronous IO into a cluster and the cluster can support both of these modes to any number of clients simultaneously. There are a few new volume options due to this feature: halo-shd-latency: The threshold below which self-heal daemons will consider children (bricks) connected. halo-nfsd-latency: The threshold below which NFS daemons will consider children (bricks) connected. halo-latency: The threshold below which all other clients will consider children (bricks) connected. halo-min-replicas: The minimum number of replicas which are to be enforced regardless of latency specified in the above 3 options. If the number of children falls below this threshold the next best (chosen by latency) shall be swapped in. New FUSE mount options: halo-latency & halo-min-replicas: As descripted above. This feature combined with multi-threaded SHD support (D1271745) results in some pretty cool geo-replication possibilities. Operational Notes: - Global consistency is gaurenteed for synchronous clients, this is provided by the existing entry-locking mechanism. - Asynchronous clients on the other hand and merely consistent to their region. Writes & deletes will be protected via entry-locks as usual preventing concurrent writes into files which are undergoing replication. Read operations on the other hand should never block. - Writes are allowed from _any_ region and propagated from the origin to all other regions. The take away from this is care should be taken to ensure multiple writers do not write the same files resulting in a gfid split-brain which will require resolution via split-brain policies (majority, mtime & size). Recommended method for preventing this is using the nfs-auth feature to define which region for each share has RW permissions, tiers not in the origin region should have RO perms. TODO: - Synchronous clients (including the SHD) should choose clients from their own region as preferred sources for reads. Most of the plumbing is in place for this via the child_latency array. - Better GFID split brain handling & better dent type split brain handling (i.e. create a trash can and move the offending files into it). - Tagging in addition to latency as a means of defining which children you wish to synchronously write to Test Plan: - The usual suspects, clang, gcc w/ address sanitizer & valgrind - Prove tests Reviewers: jackl, dph, cjh, meyering Reviewed By: meyering Subscribers: ethanr Differential Revision: https://phabricator.fb.com/D1272053 Tasks: 4117827 Change-Id: I694a9ab429722da538da171ec528406e77b5e6d1 BUG: 1428061 Signed-off-by: Kevin Vigor <kvigor@fb.com> Reviewed-on: http://review.gluster.org/16099 Reviewed-on: https://review.gluster.org/16177 Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* features/bit-rot-stub: bring in optional versioningRaghavendra Bhat2017-04-181-2/+15
| | | | | | | | | | | | | | | | * As of now bit-rot-stub does versioning always. This leads lots of getxattr calls being made in lookups. So make object versioning optional. Change-Id: I83713e45ae59fb28004bb3cfa008f2d69edebbfa BUG: 1359599 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: https://review.gluster.org/14442 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* dht: Add readdir-ahead in rebalance graph if parallel-readdir is onPoornima G2017-04-181-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Issue: The value of linkto xattr is generally the name of the dht's next subvol, this requires that the next subvol of dht is not changed for the life time of the volume. But with parallel readdir enabled, the readdir-ahead loaded below dht, is optional. The linkto xattr for first subvol, when: - parallel readdir is enabled : "<volname>-readdir-head-0" - plain distribute volume : "<volname>-client-0" - distribute replicate volume : "<volname>-afr-0" The value of linkto xattr is "<volname>-readdir-head-0" when parallel readdir is enabled, and is "<volname>-client-0" if its disabled. But the dht_lookup takes care of healing if it cannot identify which linkto subvol, the xattr points to. In dht_lookup_cbk, if linkto xattr is found to be "<volname>-client-0" and parallel readdir is enabled, then it cannot understand the value "<volname>-client-0" as it expects "<volname>-readdir-head-0". In that case, dht_lookup_everywhere is issued and then the linkto file is unlinked and recreated with the right linkto xattr. The issue is when parallel readdir is enabled, mount point accesses the file that is currently being migrated. Since rebalance process doesn't have parallel-readdir feature, it expects "<volname>-client-0" where as mount expects "<volname>-readdir-head-0". Thus at some point either the mount or rebalance will fail. Solution: Enable parallel-readdir for rebalance as well and then do not allow enabling/disabling parallel-readdir if rebalance is in progress. Change-Id: I241ab966bdd850e667f7768840540546f5289483 BUG: 1436090 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: https://review.gluster.org/17056 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* glusterd: Add validation for options rda-cache-limit rda-request-sizePoornima G2017-04-111-7/+34
| | | | | | | | | | | | | | | | | Currently when prarallel readdir is enabled, setting any junk value to rda-cache-limit and rda-request-size succeeds. This is because of bug in the special handling of these options. Fixing the same in this patch Change-Id: I902cd9ac9134c158ab6f8aea4b001254a03547bd BUG: 1439640 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: https://review.gluster.org/17008 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* Free brick_hint at the end of the functionNigel Babu2017-03-011-0/+2
| | | | | | | | | | | | | | Not freeing brick_hint causes a memory leak. This error was reported by Coverity. Change-Id: Ic923f892ea5207848cdd3fa6332a1e52e6c996b8 BUG: 789278 Signed-off-by: Nigel Babu <nigelb@redhat.com> Reviewed-on: https://review.gluster.org/16782 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* libglusterfs, dht, locks, glusterd: Coverity fixesNigel Babu2017-02-231-22/+0
| | | | | | | | | | | | | | Fix up use after free bugs and dead code Change-Id: I8f79ed6b5108926c1fac31c147b5ecba79d10785 BUG: 1424905 Signed-off-by: Nigel Babu <nigelb@redhat.com> Reviewed-on: https://review.gluster.org/16666 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* glusterd: put null check for mod_dict in build_shd_graphAtin Mukherjee2017-02-091-1/+2
| | | | | | | | | | | | Change-Id: I849f5f7eb5932d2dc2a76f8abc61e41231f9883e BUG: 1420614 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: https://review.gluster.org/16573 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Ravishankar N <ravishankar@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Prashanth Pai <ppai@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org>
* trash: fix problem with trash feature under multiplexingJeff Darcy2017-02-091-6/+0
| | | | | | | | | | | | | | | | | | With multiplexing, the trash translator gets a reconfigure call before a notify(CHILD_UP). In this case, priv->trash_itable was not yet initialized, so the reconfigure would get a SEGV. Moving the itable allocation to init seems to fix it, so trash can be reenabled. Change-Id: I21ac2d7fc66bac1bc4ec70fbc8bae306d73ac565 BUG: 1420434 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: https://review.gluster.org/16567 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Anoop C S <anoopcs@redhat.com> Reviewed-by: jiffin tony Thottan <jthottan@redhat.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* glusterd : do not load io-threads in client graph for replicate volumesAtin Mukherjee2017-02-031-0/+8
| | | | | | | | | | | | | | | | | | | client.io-threads has been turned on by default from release-3.9 onwards, however this has an adverse effects on replicate volumes due to the design limitations on replications, till that gets addressed through server side replication as a preventive measure it is wiser not to load io-threads in the client graph for replicate volumes. Change-Id: Ibc576d4517da23fcdf55c6f4d17b90152a8817d7 BUG: 1418014 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: https://review.gluster.org/16502 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Prashanth Pai <ppai@redhat.com> Reviewed-by: Ravishankar N <ravishankar@redhat.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* core: run many bricks within one glusterfsd processJeff Darcy2017-01-301-0/+7
| | | | | | | | | | | | | | | | | | | | | | | This patch adds support for multiple brick translator stacks running in a single brick server process. This reduces our per-brick memory usage by approximately 3x, and our appetite for TCP ports even more. It also creates potential to avoid process/thread thrashing, and to improve QoS by scheduling more carefully across the bricks, but realizing that potential will require further work. Multiplexing is controlled by the "cluster.brick-multiplex" global option. By default it's off, and bricks are started in separate processes as before. If multiplexing is enabled, then *compatible* bricks (mostly those with the same transport options) will be started in the same process. Change-Id: I45059454e51d6f4cbb29a4953359c09a408695cb BUG: 1385758 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: https://review.gluster.org/14763 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd, rda: If parallel readdir is enabled, split the cache limitPoornima G2017-01-231-2/+74
| | | | | | | | | | | | | | | | | | | With patch http://review.gluster.org/#/c/16072/ readdir-ahead can be loaded as a child of dht. i.e. there can be more than one instance of readdir-ahead in client process. In this case the rda-cache-size should be split among all the readdir-ahead instances. Also the value of rda-request-size is considered as the minimum cache size of any readdir-ahead instance. Change-Id: Iea2fe6d4c46adc09dd2e9a252332a0fe3005f2b9 BUG: 1401812 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: https://review.gluster.org/16424 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kaushal M <kaushal@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* glusterd: Change the volfile to have readdir-ahead as a childPoornima G2017-01-171-0/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | of dht As mentioned in feature page http://review.gluster.org/#/c/16090/ readdir-ahead will be optionally placed below dht. There are two options: 1. performance.readdir-ahead 2. performance.parallel-readdir If only option is enabled, then readdir ahead is placed at its original place as an ancestor of dht. If both the options 1 and 2 are enabled then readdir ahead is placed as a child of dht. Also changes have been made to retain the rebalance, quotad, snapd vol files to remain unchanged. Change-Id: I0adf0b476fcbf91251f5a2fee2241786a3d8255a BUG: 1401812 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/16072 Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* tier : Tier as a servicehari gowtham2017-01-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | tierd is implemented by separating from rebalance process. The commands affected: 1) Attach tier will trigger this process instead of old one 2) tier start and tier start force will also trigger this process. 3) volume status [tier] will show tier daemon as a process instead of task and normal tier status and tier detach status works. 4) tier stop implemented. 5) detach tier implemented separately along with new detach tier status 6) volume tier volname status will work using the changes. 7) volume set works This patch has separated the tier translator from the legacy DHT rebalance code. It now sends the RPCs from the CLI to glusterd separate to the DHT rebalance code. The daemon is now a service, similar to the snapshot daemon, and can be viewed using the volume status command. The code for the validation and commit phase are the same as the earlier tier validation code in DHT rebalance. The “brickop” phase has been changed so that the status command can use this framework. The service management framework is now used. DHT rebalance does not use this framework. This service framework takes care of : *) spawning the daemon, killing it and other such processes. *) volume set options , which are written on the volfile. *) restart and reconfigure functions. Restart is to restart the daemon at two points 1)after gluster goes down and comes up. 2) to stop detach tier. *) reconfigure is used to make immediate volfile changes. By doing this, we don’t restart the daemon. it has the code to rewrite the volfile for topological changes too (which comes into place during add and remove brick). With this patch the log, pid, and volfile are separated and put into respective directories. Change-Id: I3681d0d66894714b55aa02ca2a30ac000362a399 BUG: 1313838 Signed-off-by: hari gowtham <hgowtham@redhat.com> Reviewed-on: http://review.gluster.org/13365 Smoke: Gluster Build System <jenkins@build.gluster.org> Tested-by: hari gowtham <hari.gowtham005@gmail.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* uss: snapd should enable SSL if SSL is enabled on volumeRajesh Joseph2016-12-011-0/+15
| | | | | | | | | | | | | | | | During snapd graph generation we should check if SSL is enabled on main volume or not. This is because clients will communicate with snapd as if it is communicating to a brick. Change-Id: I0d7fe86c567b297a8528a48faf06161d4c3cb415 Signed-off-by: Rajesh Joseph <rjoseph@redhat.com> BUG: 1400013 Reviewed-on: http://review.gluster.org/15979 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kaushal M <kaushal@redhat.com>
* glusterd: fix unused variable warnings/errorsKaleb S. KEITHLEY2016-09-121-29/+0
| | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a/the "leak" - via the generated rpc/xdr headers - of pragmas that mask these warnings. However 14085 won't pass the smoke test until all the warnings are fixed. Change-Id: Ibf069935a630cf10a9a829f5a3194621a891b616 BUG: 1369124 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15282 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Ravishankar N <ravishankar@redhat.com>
* glusterd: Convert volume to replica after adding brick self heal is not ↵Mohit Agrawal2016-08-111-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | triggered Problem: After add brick to a distribute volume to convert to replica is not triggering self heal. Solution: Modify the condition in brick_graph_add_index to set trusted.afr.dirty attribute in xlator. Test : To verify the patch followd below steps 1) Create a single node volume gluster volume create <DIS> <IP:/dist1/brick1> 2) Start volume and create mount point mount -t glusterfs <IP>:/DIS /mnt 3) Touch some file and write some data on file 4) Add another brick along with replica 2 gluster volume add-brick DIS replica 2 <IP>:/dist2/brick2 5) Before apply the patch file size is 0 bytes in mount point. BUG: 1365455 Change-Id: Ief0ccbf98ea21b53d0e27edef177db6cabb3397f Signed-off-by: Mohit Agrawal <moagrawa@redhat.com> Reviewed-on: http://review.gluster.org/15118 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Ravishankar N <ravishankar@redhat.com> Reviewed-by: Anuradha Talur <atalur@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* features/ganesha : remove ganesha xlator from client graphJiffin Tony Thottan2016-07-311-22/+0
| | | | | | | | | | | | | | | | | | The ganesha introduced in dummy xlator in the client graph, which is used for introducing the cli options. When the volume set command "ganesha.enable" ran, this xlator will add into client graph but never removed from it. In my opinion there is no point in adding the ganesha xlator in the client graph Change-Id: I926c4b4adf991361aa459679e275cb58246c5294 BUG: 1349270 Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> Reviewed-on: http://review.gluster.org/14871 CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* io-stats: fix translator namesJeff Darcy2016-07-291-2/+7
| | | | | | | | | | | Change-Id: Icf5afaee8b7c704aecab7f8a8a1df9f1bc9288ce BUG: 1360401 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/15016 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* dict: Don't expose get_new_dict/dict_destroyPranith Kumar K2016-07-251-6/+6
| | | | | | | | | | | | | | | get_new_dict/dict_destroy is causing confusion where, dict_new/dict_destroy or get_new_dict/dict_unref are used instead of dict_new/dict_unref. Change-Id: I4cc69f5b6711d720823395e20fd624a0c6c1168c BUG: 1296043 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/13183 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com>
* core: use readdir(3) with glibc, and associated cleanupKaleb S. KEITHLEY2016-07-181-33/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Starting with glibc-2.23 (i.e. what's in Fedora 25), readdir_r(3) is marked as deprecated. Specifically the function decl in <dirent.h> has the deprecated attribute, and now warnings are thrown during the compile on Fedora 25 builds. The readdir(_r)(3) man page (on Fedora 25 at least) and World+Dog say that glibc's readdir(3) is, and always has been, MT-SAFE as long as only one thread is accessing the directory object returned by opendir(). World+Dog also says there is a potential buffer overflow in readdir_r(). World+Dog suggests that it is preferable to simply use readdir(). There's an implication that eventually readdir_r(3) will be removed from glibc. POSIX has, apparently deprecated it in the standard, or even removed it entirely. Over and above that, our source near the various uses of readdir(_r)(3) has a few unsafe uses of strcpy()+strcat(). (AFAIK nobody has looked at the readdir(3) implemenation in *BSD to see if the same is true on those platforms, and we can't be sure of MacOS even though we know it's based on *BSD.) Change-Id: I5481f18ba1eebe7ee177895eecc9a80a71b60568 BUG: 1356998 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/14838 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Kotresh HR <khiremat@redhat.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* glusterd/cli: coverity fixesAtin Mukherjee2016-06-281-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A downstream coverity run has revealed few of the following coverity defects. Since the downstream code is a clone of a specific upstream branch the defects hold true for the upstream as well. Defect type: NEGATIVE_RETURNS xlators/mgmt/glusterd/src/glusterd-rpc-ops.c:641: negative_returns: "op_errno" is passed to a parameter that cannot be negative. Defect type: BUFFER_SIZE_WARNING xlators/mgmt/glusterd/src/glusterd-volume-ops.c:2124: buffer_size_warning: Calling strncpy with a maximum size argument of 261 bytes on destination array "volinfo->volname" of size 261 bytes might leave the destination string unterminated. Defect type: BUFFER_SIZE_WARNING xlators/mgmt/glusterd/src/glusterd-volgen.c:4888: buffer_size_warning: Calling strncpy with a maximum size argument of 261 bytes on destination array "volinfo->volname" of size 261 bytes might leave the destination string unterminated. Defect type: STRING_OVERFLOW xlators/mgmt/glusterd/src/glusterd-volgen.c:3449: string_overflow: You might overrun the 256 byte destination string "tmp_volname" by writing 261 bytes from "volinfo->volname". Defect type: BUFFER_SIZE_WARNING xlators/mgmt/glusterd/src/glusterd-utils.c:3392: buffer_size_warning: Calling strncpy with a maximum size argument of 261 bytes on destination array "new_volinfo->volname" of size 261 bytes might leave the destination string unterminated. Defect type: NO_EFFECT xlators/mgmt/glusterd/src/glusterd-utils.c:7359: remediation: Was "rebal->rebalance_id" formerly declared as a pointer? Defect type: USE_AFTER_FREE xlators/mgmt/glusterd/src/glusterd-utils.c:7115: pass_freed_arg: Passing freed pointer "volinfo" as an argument to "glusterd_friend_contains_vol_bricks". Defect type: DEADCODE cli/src/cli-cmd-parser.c:1767: dead_error_begin: Execution cannot reach this statement: "ret = -1;". Change-Id: Ie941bdf31923e2f39618dd94bfae16fdb3ad65f1 BUG: 789278 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/14818 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* performance/decompounder: Add graph for decompounder xlatorAshish Pandey2016-06-141-9/+50
| | | | | | | | | | | | | | | | | | | | | This xlator will fall below protocol/server. This is mandatory xlator without any options. Observed that the callback for decompounder translator was not added which was causing volume start to fail. Added cbks for decompounder. Change-Id: I3e16a566376338d9c6d36d6fbc7bf295fda9f3a6 BUG: 1335019 Signed-off-by: Ashish Pandey <aspandey@redhat.com> Reviewed-on: http://review.gluster.org/13968 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Ravishankar N <ravishankar@redhat.com> Reviewed-by: Anuradha Talur <atalur@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* afr: afr-pending-xattr fallback checkRavishankar N2016-06-091-1/+1
| | | | | | | | | | | | | | | | | | | | Commit 6e635284a4411b816d4d860a28262c9e6dc4bd6a introduced a comma separated list of values to be used as AFR's pending changelogs. If this xlator option is missing in the volfile, fall back to using client xlator names for constructing the pending changelog names. Also, since the aforementioned commit was reverted from 3.7 and 3.8 branches, introduce GD_OP_VERSION_3_9_0 and change the op-version for this feature to GD_OP_VERSION_3_9_0. Change-Id: I3639b9ab475bd8d9929cc7527d9f4584dee1ad1b BUG: 1285152 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/14642 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* glusterd: volgen and volume set changes for leasesPoornima G2016-06-021-0/+25
| | | | | | | | | | | | | Add leases xlator in volgen and also add corresponding volume set options Change-Id: Ic5de50cdb87eaf6a833e739bc7e08fecbeca3de3 BUG: 1319992 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/11722 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* cli/glusterd: add/remove brick fixes for arbiter volumesRavishankar N2016-05-191-35/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1.Provide a command to convert replica 2 volumes to arbiter volumes. Existing self-heal logic will automatically heal the file hierarchy into the arbiter brick, the progress of which can be monitored using the heal info command. Syntax: gluster volume add-brick <VOLNAME> replica 3 arbiter 1 <HOST:arbiter-brick-path> 2. Add checks when removing bricks from arbiter volumes: - When converting from arbiter to replica 2 volume, allow only arbiter brick to be removed. - When converting from arbiter to plain distribute volume, allow only if arbiter is one of the bricks that is removed. 3. Some clean-up: - Use GD_MSG_DICT_GET_SUCCESS instead of GD_MSG_DICT_GET_FAILED to log messages that are not failures. - Remove unused variable `brick_list` - Move 'brickinfo->group' related functions to glusted-utils. Change-Id: Ic87b8c7e4d7d3ab03f93e7b9f372b314d80947ce BUG: 1318289 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/14126 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd: copy real_path from older brickinfo during brick importAtin Mukherjee2016-05-181-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | In glusterd_import_new_brick () new_brickinfo->real_path will not be populated for the first time and hence if the underlying file system is bad for the same brick, import will fail resulting in inconsistent configuration data. Fix is to populate real_path from old brickinfo object. Also there were many cases where we were unnecessarily calling realpath() and that may cause in failure. For eg - if a remove brick is executed with a brick whoose underlying file system has crashed, remove-brick fails since realpath() call fails. We'd need to call realpath() here as the value is of no use.Hence passing construct_realpath as _gf_false in glusterd_volume_brickinfo_get_by_brick () is a must in such cases. Change-Id: I7ec93871dc9e616f5d565ad5e540b2f1cacaf9dc BUG: 1335531 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/14306 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* WORM/Retention Translator: Implementation of file level WORMkarthik-us2016-05-011-4/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To activate the file level worm feature, the features.read-only and features.worm options should be switched "off" on the volume and the features.worm-file-level should be switched "on". Both read-only and worm or worm-file-level cannot be switched "on" together. The files which are created when the worm-file-level option is set on the volume will have their own retention profile. If both worm and worm-file-level are "on" at that time the worm which is the volume level worm will have priority over file level worm. If worm-file level is switched "off" after some time and the read-only option is switched "on" then read-only will have priority. The current implementation allows the users to manually transmit a file to a WORM-Retained state by removing all the write bits of the file using the chmod command. The file will have a retention profile which contains the state of the file, mode of retention, and the default retention time. The file will be made WORM-Retained for a default of 120 seconds during which it will be immutable and undeletable and it sets the atime of the file to the time till which it is retained. After that period if any fop request comes for that file, will make the transition from WORM-Retained state to WORM state, where the file will be immutable but deletable and, it will reset the atime to the actual atime of the file. If a WORM file needs to be made undeletable again, it can be done by using the chmod command with all the write bits removed. There are two modes of retention: 1. Relax: where the retention time of a WORM-Retained file can be increased or decreased. 2. Enterprise: where the retention time of a WORM-Retained file can be increased but not be decreased. Whenever a utime change(touch -a, -t, ...)request comes for a file it checks the mode of retention before setting the utimes. This is done only if the file is WORM-Retained but for a WORM file it will change the utimes. Lazy auto commit: Whenever a file gets created it will store the creation time of the file or if a file already exists then any of the next unlink, link, truncate or rename fops will set the current time as the start time in an xattr. The next rename/unlink/truncate/link call will check for the auto commit period and if is is expired, then it will automatically do the state transition. If it is a normal file then it gets converted to WORM-Retained state. If it is a WORM-Retained file and its retention period is expired, then it gets converted to WORM state. Added the volume set options for the WORM translator. It allows the users to change the default values of auto-commit-period, default-retention-period, retention-mode. To make use of the file-level WORM first we have to set the 'worm-file' option to 'on'. The files which are created when the worm-file option is set on the volume will get WORM-Retained. Other files will work as usual and will not be WORMed. The auto-commit-period, retention-mode, and the default-retention-period values for the file will be set to the values which are set on the volume when the file is created. Added the tests to check the basic functionalities of the WORM/Retention feature. Change-Id: I77bd9777f9395a944d76b5cc35a5b48a3c14d148 BUG: 1326308 Signed-off-by: karthik-us <ksubrahm@redhat.com> Reviewed-on: http://review.gluster.org/13429 Reviewed-by: Niels de Vos <ndevos@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* quota/glusterd: enhance quota enable and disable processvmallika2016-04-291-8/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously quota crawl was done from the single mount point, this is very slow process if there are huge number of files exists in the volume This RFE will now spawn crawl process for each brick in the volume, and files are looked in parallel independently for each brick. This improves the speed of crawling process for entire files-system This patch also fixes below problem * Previously, mountdir was created under '/tmp'. If someone tries to cleanup '/tmp'/ directory then it is very dangerous that we loose volume data So create a mount point under /var/run/gluster/tmp instead * Previously, file-system crawl is performed from all the nodes, which is a redundant operation and performance will degrade The problem is fixed with this patch Change-Id: Icabedeb44182139ace9c8106793803122388cab8 BUG: 1290766 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/12952 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Manikandan Selvaganesh <mselvaga@redhat.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd: default value of nfs.disable, change from false to trueKaleb S KEITHLEY2016-04-271-1/+1
| | | | | | | | | | | | | | | | | | Next step in eventual deprecation of glusterfs nfs server in favor of ganesha.nfsd. Also replace several open-coded strings with constant. Change-Id: If52f5e880191a14fd38e69b70a32b0300dd93a50 BUG: 1092414 Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/13738 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Tested-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* glusterd: SSL certificate depth volume option is incorrectKaleb S KEITHLEY2016-04-251-6/+6
| | | | | | | | | | | | | | | | | | | Between 3.7.1 and 3.7.2 a typo was introduced changing the string ssl-cert-depth to ssl-cetificate-depth. [sic] rpc/rpc-transport/socket/src/socket.c still expects the string ssl-cert-depth. Also replace a couple errant tabs with spaces. Change-Id: I0621258470bd831c97008b56123a9dc7029d73f1 BUG: 1330248 Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/14066 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* nsr/jbr: Renaming nsr to jbrAvra Sengupta2016-04-251-10/+10
| | | | | | | | | | | | | | | As per community consensus, we have decided to rename nsr to jbr(Journal-Based-Replication). This is the patch to rename the "nsr" code to "jbr" Change-Id: Id2a9837f2ec4da89afc32438b91a1c302bb4104f BUG: 1328043 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/13899 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* qemu-block: mop leftover codePrasanna Kumar Kalever2016-04-241-14/+0
| | | | | | | | | | | | | | | | | | | | This patch cleans off the code that was leftover by '6860968' which basically remove qemu-block from gluster code repo Also update 'bug-1168803-snapd-option-validation-fix.t' which previously used 'features.file-snapshot' for checking 'volume set' for some reason. Change-Id: I2c4f28e186b74a4ce55d48c0fa7f3f79ca1901b5 BUG: 1198849 Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com> Reviewed-on: http://review.gluster.org/13964 Tested-by: Prasanna Kumar Kalever <pkalever@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* glusterd: populate brickinfo->real_path conditionallyAtin Mukherjee2016-04-111-1/+1
| | | | | | | | | | | | | | | | | | | | glusterd_brickinfo_new_from_brick () is called from multiple places and one of them is glusterd_brick_rpc_notify where its very well possible that an underlying brick's file system has crashed and a disconnect event has been received. In this case glusterd tries to build the brickinfo from the brickid in the RPC request, however the same fails as glusterd_brickinfo_new_from_brick () fails from realpath. Fix is to skip populating real_path if its a disconnect event. Change-Id: I9d9149c64a9cf2247abb731f219c1b1eef037960 BUG: 1325841 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/13965 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* glusterd: remove unused large memory/buffer allocationsPrasanna Kumar Kalever2016-03-241-2/+0
| | | | | | | | | | | | | | This patch cleans dead buffer allocations which are never used in the code. Change-Id: I8c55837434fd5bf9dde9fb7b070fdefbf64cf4a3 BUG: 1253828 Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com> Reviewed-on: http://review.gluster.org/11928 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd / afr : Enable auto heal when replica count increasesAnuradha Talur2016-03-211-0/+52
| | | | | | | | | | | | | | | | | | | | | In replicate volumes, when a brick is added to a replicate group, heal to the new brick should be triggered. Also, the new brick should not be considered as source for healing till it is up to date. Previously, extended attributes had to be set manually on the bricks for this to happen. This patch is part 1 patch to automate this process. Change-Id: I29958448618372bfde23bf1dac5dd23dba1ad98f BUG: 1276203 Signed-off-by: Anuradha Talur <atalur@redhat.com> Reviewed-on: http://review.gluster.org/12451 Reviewed-by: Atin Mukherjee <amukherj@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Ravishankar N <ravishankar@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com>
* glusterd: Bug fixes for IPv6 supportNithin D2016-02-201-0/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: Glusterd not working using ipv6 transport. The idea is with proper glusterd.vol configuration, 1. glusterd needs to listen on default port (240007) as IPv6 TCP listner. 2. Volume creation/deletion/mounting/add-bricks/delete-bricks/peer-probe needs to work using ipv6 addresses. 3. Bricks needs to listen on ipv6 addresses. All the above functionality is needed to say that glusterd supports ipv6 transport and this is broken. Fix: When "option transport.address-family inet6" option is present in glusterd.vol file, it is made sure that glusterd creates listeners using ipv6 sockets only and also the same information is saved inside brick volume files used by glusterfsd brick process when they are starting. Tests Run: Regression tests using ./run-tests.sh IPv4: Ran manually till tests/basic/rpm.t . IPv6: (Need to add the above mentioned config and also add an entry for "hostname ::1" in /etc/hosts) Started failing at ./tests/basic/glusterd/arbiter-volume-probe.t and ran successfully till here Unit Tests using Ipv6 peer probe add-bricks remove-bricks create volume replace-bricks start volume stop volume delete volume Change-Id: Iebc96e6cce748b5924ce5da17b0114600ec70a6e BUG: 1117886 Signed-off-by: Nithin D <nithind1988@yahoo.in> Reviewed-on: http://review.gluster.org/11988 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* all: fixes for clang compile warningsKaleb S KEITHLEY2016-02-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | cli/src/cli-cmd-parser.c (chenk) cli/src/cli-xml-output.c (spandit) cli/src/cli.c (chenk) libglusterfs/src/common-utils.c (vmallika) libglusterfs/src/gfdb/gfdb_sqlite3.c (jfernand +1) rpc/rpc-transport/socket/src/socket.c (?) xlators/cluster/afr/src/afr-transaction.c (?) xlators/cluster/dht/src/dht-common.h (srangana +2) xlators/cluster/dht/src/dht-selfheal.c (srangana +2) xlators/debug/io-stats/src/io-stats.c (R. Wareing) xlators/features/barrier/src/barrier.c (vshastry) xlators/features/bit-rot/src/bitd/bit-rot-scrub.h (vshankar +1) xlators/features/shard/src/shard.c (kdhananj +1) xlators/mgmt/glusterd/src/glusterd-ganesha.c (skoduri) xlators/mgmt/glusterd/src/glusterd-handler.c (atinmu) xlators/mgmt/glusterd/src/glusterd-op-sm.h (atinmu) xlators/mgmt/glusterd/src/glusterd-snapshot.c (spandit) xlators/mgmt/glusterd/src/glusterd-syncop.c (atinmu) xlators/mgmt/glusterd/src/glusterd-volgen.c (atinmu) xlators/protocol/client/src/client-messages.h (mselvaga +1) xlators/storage/bd/src/bd-helper.c (M. Mohan Kumar) xlators/storage/bd/src/bd.c (M. Mohan Kumar) xlators/storage/posix/src/posix.c (nbalacha +1) Change-Id: I85934fbcaf485932136ef3acd206f6ebecde61dd BUG: 1293133 Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/13031 CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* experimental: add fdl (Full Data Logging) translatorJeff Darcy2016-02-131-0/+25
| | | | | | | | | | | | | | | | | | | | | | | | NSR needs logging that is different than our existing changelog in several ways: * Full data, not just metadata * Pre-op, not post-op * High performance * Supports the concept of time-bounded "terms" Others (for example EC) might need the same thing. This patch adds such a translator. It also adds code to dump the resulting journals, and to replay them using syncops, plus (very rudimentary) tests for all of the above. Change-Id: I29680a1b4e0a9e7d5a8497fef302c46434b86636 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/12450 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
generated by cgit (git 2.34.1) at 2024-06-23 21:46:22 +0000