summaryrefslogtreecommitdiffstats
path: root/xlators/mgmt/glusterd/src/glusterd-svc-helper.c
Commit message (Collapse)AuthorAgeFilesLines
* tier : Tier as a servicehari gowtham2017-01-161-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | tierd is implemented by separating from rebalance process. The commands affected: 1) Attach tier will trigger this process instead of old one 2) tier start and tier start force will also trigger this process. 3) volume status [tier] will show tier daemon as a process instead of task and normal tier status and tier detach status works. 4) tier stop implemented. 5) detach tier implemented separately along with new detach tier status 6) volume tier volname status will work using the changes. 7) volume set works This patch has separated the tier translator from the legacy DHT rebalance code. It now sends the RPCs from the CLI to glusterd separate to the DHT rebalance code. The daemon is now a service, similar to the snapshot daemon, and can be viewed using the volume status command. The code for the validation and commit phase are the same as the earlier tier validation code in DHT rebalance. The “brickop” phase has been changed so that the status command can use this framework. The service management framework is now used. DHT rebalance does not use this framework. This service framework takes care of : *) spawning the daemon, killing it and other such processes. *) volume set options , which are written on the volfile. *) restart and reconfigure functions. Restart is to restart the daemon at two points 1)after gluster goes down and comes up. 2) to stop detach tier. *) reconfigure is used to make immediate volfile changes. By doing this, we don’t restart the daemon. it has the code to rewrite the volfile for topological changes too (which comes into place during add and remove brick). With this patch the log, pid, and volfile are separated and put into respective directories. Change-Id: I3681d0d66894714b55aa02ca2a30ac000362a399 BUG: 1313838 Signed-off-by: hari gowtham <hgowtham@redhat.com> Reviewed-on: http://review.gluster.org/13365 Smoke: Gluster Build System <jenkins@build.gluster.org> Tested-by: hari gowtham <hari.gowtham005@gmail.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* events: Add FMT_WARN for gf_eventPranith Kumar K2016-11-181-3/+10
| | | | | | | | | | | | | | | | | Raghavendra G found that posix is trying to print %s but passing an int when HEALTH_CHECK fails in posix. These are the kind of bugs that should be caught at compilation itself. Also fixed the problematic gf_event() callers. BUG: 1386097 Change-Id: Id7bd6d9a9690237cec3ca1aefa2aac085e8a1270 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/15671 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* glusterd: Add async eventsAtin Mukherjee2016-08-221-1/+3
| | | | | | | | | | | | | | | | | | | As the eventing framework is already in the code, this patch targets to capture all the async glusterd events which are important to be notified to the higher layers which consume the eventing framework. I plan to break this work into two different patches where this patch set covers the first set of events. Change-Id: Ie1bd4f6fa84117b26ccb4c75bc4dc68e6ef19134 BUG: 1360809 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/15015 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Rohan Kanade <rkanade@redhat.com> Reviewed-by: Samikshan Bairagya <samikshan@gmail.com>
* glusterd: default value of nfs.disable, change from false to trueKaleb S KEITHLEY2016-04-271-6/+2
| | | | | | | | | | | | | | | | | | Next step in eventual deprecation of glusterfs nfs server in favor of ganesha.nfsd. Also replace several open-coded strings with constant. Change-Id: If52f5e880191a14fd38e69b70a32b0300dd93a50 BUG: 1092414 Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/13738 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Tested-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* core: use syscall wrappers instead of direct syscalls -- glusterdKaleb S. KEITHLEY2015-10-281-4/+5
| | | | | | | | | | | | | | | various xlators and other components are invoking system calls directly instead of using the libglusterfs/syscall.[ch] wrappers. If not using the system call wrappers there should be a comment in the source explaining why the wrapper isn't used. Change-Id: I28bf2a5f7730b35914e7ab57fed91e1966b30073 BUG: 1267967 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/12379 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* glusterd: Stop/restart/notify to daemons(svcs) during reset/set on a volumeanand2015-08-061-15/+114
| | | | | | | | | | | | | | | | | | | | problem : Reset/set commands were not working properly. reset command returns success but it not sending notification to svcs if corresponding graph modified. Fix: Whenever reset/set command issued, generate the temp graph and compare with original graph and do the fallowing actions 1.) If both graph are identical nothing to do with svcs. 2.) If any changes in graph topology restart/stop service by calling svc manager. 3) If changes in options send notify signal by calling glusterd_fetchspec_notify. Change-Id: I852c4602eafed1ae6e6a02424814fe3a83e3d4c7 BUG: 1209329 Signed-off-by: anand <anekkunt@redhat.com> Reviewed-on: http://review.gluster.org/10850 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd: Invoking daemon reconfigure functions correctlyanand2015-05-091-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | Problem : Scrub and bitd reconfigure functions were not invoking if quota is not enabled. Reason : In glusterd_svcs_reconfigure, if quota is not enabled then it is returning in the middle of the function without calling bitd and scrub reconfigure functions. Fix : If quota is not enable on volume, skip quota reconfigure and continue for other daemon reconfigure. This patch also address the state dump issue for bitd and quotad (logs the scrub and bitd info into state dump). Change-Id: I39ea004b70c95543c08496245be595b3ea044a29 BUG: 1219355 Signed-off-by: anand <anekkunt@redhat.com> Reviewed-on: http://review.gluster.org/10622 Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Tested-by: NetBSD Build System Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* glusterd: do not pass volinfo in glusterd_svc_manager functionGaurav Kumar Garg2015-04-301-1/+1
| | | | | | | | | | | | | | | | | On restarting of glusterd first it will start all the bricks present in the volume then it will start all the services. During starting of all the services it may pass volinfo as a NULL. It will cause Assert failure in glusterd_bitdsvc_manager function and will cause a glusterd crash. Change-Id: Ia14cf5022da88516cdd576eb2d1e0e7b17a3782b BUG: 1207029 Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> Reviewed-on: http://review.gluster.org/10241 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* glusterd: bitd daemon should not start on the node which dont have any brickGauravKumarGarg2015-04-101-1/+1
| | | | | | | | | | | | | | | | | | If user enable bitrot from node1 which have brick then glusterd starting bitd daemon on node1 as well as glusterd starting bitd deamon on another node2 which does not have any brick (node1 and node2 are part of cluster). With this fix glusterd will not start bitd daemon on the node which don't have brick. Change-Id: Ic1c68d204221d369d89d628487cdd5957964792e BUG: 1207029 Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> Reviewed-on: http://review.gluster.org/10071 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* cli/glusterd: CLI interface for BitRot detectionVenky Shankar2015-03-241-2/+16
| | | | | | | | | | | | | | | | * BitRot enable/disable CLI per volume * Volfile generation for Scrubber * Relevant glusterd infrastructure Change-Id: I1212af63f93ecc52b22ee6da920e1664f66a1e39 BUG: 1170075 Original-Author: Raghavendra Bhat <raghavendra@redhat.com> Original-Author: Venky Shankar <vshankar@redhat.com> Original-Author: Gaurav Kumar Garg <ggarg@redhat.com> Original-Author: Anand Nekkunti <anekkunt@redhat.com> Reviewed-on: http://review.gluster.org/9986 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* mgmt/glusterd: generate volfile for BitDVenky Shankar2015-03-241-0/+16
| | | | | | | | | | | | | | * Implement the skeleton of bit-rot xlator. Original-Author: Raghavendra Bhat <raghavendra@redhat.com> Signed-off-by: Venky Shankar <vshankar@redhat.com> Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> Signed-off-by: Anand Nekkunti <anekkunt@redhat.com> Change-Id: If33218bdc694f5f09cb7b8097c4fdb74d7a23b2d BUG: 1170075 Reviewed-on: http://review.gluster.org/9710 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: nfs,shd,quotad,snapd daemons refactoringAtin Mukherjee2015-02-201-0/+125
This patch ports nfs, shd, quotad & snapd with the approach suggested in http://www.gluster.org/pipermail/gluster-devel/2014-December/043180.html Change-Id: I4ea5b38793f87fc85cc9d2cf873727351dedffd2 BUG: 1191486 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/9428 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Nekkunti <anekkunt@redhat.com>
generated by cgit (git 2.34.1) at 2024-06-03 12:09:15 +0000