summaryrefslogtreecommitdiffstats
path: root/xlators/mgmt/glusterd/src/glusterd-snapshot.c
Commit message (Collapse)AuthorAgeFilesLines
* glusterd: Make reset-brick work correctly if brick-mux is onSamikshan Bairagya2017-05-101-2/+0
| | | | | | | | | | | | | | | | | | | Reset brick currently kills of the corresponding brick process. However, with brick multiplexing enabled, stopping the brick process would render all bricks attached to it unavailable. To handle this correctly, we need to make sure that the brick process is terminated only if brick-multiplexing is disabled. Otherwise, we should send the GLUSTERD_BRICK_TERMINATE rpc to the respective brick process to detach the brick that is to be reset. Change-Id: I69002d66ffe6ec36ef48af09b66c522c6d35ac58 BUG: 1446172 Signed-off-by: Samikshan Bairagya <samikshan@gmail.com> Reviewed-on: https://review.gluster.org/17128 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd: (storhaug) remove ganeshaKaleb S. KEITHLEY2017-03-211-96/+0
| | | | | | | | | | | | | | | | remove all vestiges of ganesha The storhaug CLI is used to manage ganesha and Samba. Also any setup and teardown of the ganesha HA is initiated using storhaug to preserve the proper layering. Change-Id: I0eec0016a1b7802a36e7b2d92896b86fdf8607d5 BUG: 1420713 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: https://review.gluster.org/16504 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* glusterd: use sys_lstat instead of lstatJeff Darcy2017-03-021-1/+1
| | | | | | | | | | | | | Showed up in 0symbol-check.t while testing something else. Might as well fix it now. Change-Id: Ic6b8214de6f486187afc4987c5ffbbca02c8997f Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: https://review.gluster.org/16820 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Prashanth Pai <ppai@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* Remove deadcode, found by covertyMichael Scherer2017-02-261-2/+0
| | | | | | | | | | | | | | | Since ret value is unchanged since last goto out, this code is unreachable. Change-Id: Iff8618739900b44bad6c4e663a4201d9e14cb457 BUG: 789278 Signed-off-by: Michael Scherer <misc@redhat.com> Reviewed-on: https://review.gluster.org/16713 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> Tested-by: Michael Scherer <misc@fedoraproject.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* core: run many bricks within one glusterfsd processJeff Darcy2017-01-301-33/+35
| | | | | | | | | | | | | | | | | | | | | | | This patch adds support for multiple brick translator stacks running in a single brick server process. This reduces our per-brick memory usage by approximately 3x, and our appetite for TCP ports even more. It also creates potential to avoid process/thread thrashing, and to improve QoS by scheduling more carefully across the bricks, but realizing that potential will require further work. Multiplexing is controlled by the "cluster.brick-multiplex" global option. By default it's off, and bricks are started in separate processes as before. If multiplexing is enabled, then *compatible* bricks (mostly those with the same transport options) will be started in the same process. Change-Id: I45059454e51d6f4cbb29a4953359c09a408695cb BUG: 1385758 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: https://review.gluster.org/14763 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* snapshot: Fix restore rollback to reassign snap volume ids to bricksAvra Sengupta2016-12-161-0/+112
| | | | | | | | | | | | | | | | | | | | Added further checks to ensure we do not go beyond prevalidate when trying to restore a snapshot which has a nfs-gansha conf file, in a cluster when nfs-ganesha is not enabled The error message for the particular scenario is: "Snapshot(<snapname>) has a nfs-ganesha export conf file. cluster.enable-shared-storage and nfs-ganesha should be enabled before restoring this snapshot." Change-Id: I1b87e9907e0a5e162f26ef1ca89fe76e8da8610f BUG: 1404118 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/16116 Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* snapshot: Fix the failure to recreate clones with same nameAvra Sengupta2016-11-011-14/+40
| | | | | | | | | | | | | | | | | | | The brick path of snapshot clones contained the clonename, thereby failing to create newer clones with the same name after the original clone had been deleted. This fix creates the brick path with the clone's vol id instead of the clones name. Hence future clones with the same name will not have the namespace clash. Change-Id: I262712adc576122f051b5d1ce171d020efaefd1a BUG: 1387160 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/15683 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* snapshot: Fix for memory leaks in snapshot code pathAvra Sengupta2016-10-251-10/+28
| | | | | | | | | | | Change-Id: Idc2cb16574d166e3c0ee1f7c3a485f1acb19fc8c BUG: 1386088 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/15668 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* glusterd (snapshot): fix unused variable warnings/errorsKaleb S. KEITHLEY2016-09-121-22/+0
| | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a/the "leak" - via the generated rpc/xdr headers - of pragmas that mask these warnings. However 14085 won't pass the smoke test until all the warnings are fixed. Change-Id: I359145d9e726b0fae78cac8003b57c216780cbba BUG: 1369124 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15278 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* snapshot/eventsapi: Integrate snapshot events with eventsapiAvra Sengupta2016-09-011-7/+98
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. EVENT_SNAPSHOT_CREATED : snapshot_name=snap1 volume_name=test_vol snapshot_uuid=26dd6c52-6021-40b1-a507-001a80401d70 2. EVENT_SNAPSHOT_CREATE_FAILED : snapshot_name=snap1 volume_name=test_vol error=Snapshot snap1 already exists 3. EVENT_SNAPSHOT_ACTIVATED : snapshot_name=snap1 snapshot_uuid=26dd6c52-6021-40b1-a507-001a80401d70 4. EVENT_SNAPSHOT_ACTIVATE_FAILED: snapshot_name=snap1 error=Snapshot snap1 is already activated. 5. EVENT_SNAPSHOT_DEACTIVATED : snapshot_name=snap1 snapshot_uuid=26dd6c52-6021-40b1-a507-001a80401d70 6. EVENT_SNAPSHOT_DEACTIVATE_FAILED : snapshot_name=snap3 error=Snapshot (snap3) does not exist. 7. EVENT_SNAPSHOT_SOFT_LIMIT_REACHED : volume_name=test_vol volume_id=2ace2616-5591-4b9b-be2a-38592dda5758 8. EVENT_SNAPSHOT_HARD_LIMIT_REACHED : volume_name=test_vol volume_id=2ace2616-5591-4b9b-be2a-38592dda5758 9. EVENT_SNAPSHOT_RESTORED : snapshot_name=snap1 volume_name=test_vol snapshot_uuid=3a840ec5-08da-4f2b-850d-1d5539a5d14d 10. EVENT_SNAPSHOT_RESTORE_FAILED : snapshot_name=snap10 error=Snapshot (snap10) does not exist 11. EVENT_SNAPSHOT_DELETED : snapshot_name=snap1 snapshot_uuid=d9ff3d4f-f579-4345-a4da-4f9353f0950c 12. EVENT_SNAPSHOT_DELETE_FAILED : snapshot_name=snap2 error=Snapshot (snap2) does not exist 13. EVENT_SNAPSHOT_CLONED : clone_uuid=93ba9f06-cb9c-4ace-aa52-2616e7f31022 snapshot_name=snap1 clone_name=clone2 14. EVENT_SNAPSHOT_CLONE_FAILED : snapshot_name=snap1 clone_name=clone2 error=Volume with name:clone2 already exists 15. EVENT_SNAPSHOT_CONFIG_UPDATED : auto-delete=enable config_type=system_config config_type=volume_config hard_limit=100 16. EVENT_SNAPSHOT_CONFIG_UPDATE_FAILED : error=Invalid snap-max-soft-limit 110. Expected range 1 - 100 17. EVENT_SNAPSHOT_SCHEDULER_INITIALISED : status=Success 18. EVENT_SNAPSHOT_SCHEDULER_INIT_FAILED 19. EVENT_SNAPSHOT_SCHEDULER_ENABLED : status=Successfuly Enabled 20. EVENT_SNAPSHOT_SCHEDULER_ENABLE_FAILED : error=Snapshot scheduler is already enabled. 21. EVENT_SNAPSHOT_SCHEDULER_SCHEDULE_ADDED : status=Successfuly added job job1 22. EVENT_SNAPSHOT_SCHEDULER_SCHEDULE_ADD_FAILED : status=Failed to add job job1 error=The job already exists. 23. EVENT_SNAPSHOT_SCHEDULER_SCHEDULE_EDITED : status=Successfuly edited job job1 24. EVENT_SNAPSHOT_SCHEDULER_SCHEDULE_EDIT_FAILED : status=Failed to edit job job2 error=The job cannot be found. 25. EVENT_SNAPSHOT_SCHEDULER_SCHEDULE_DELETED : status=Successfuly deleted job job1 26. EVENT_SNAPSHOT_SCHEDULER_SCHEDULE_DELETE_FAILED : status=Failed to delete job job1 error=The job cannot be found. 27. EVENT_SNAPSHOT_SCHEDULER_DISABLED : status=Successfuly Disabled 28. EVENT_SNAPSHOT_SCHEDULER_DISABLE_FAILED : error=Snapshot scheduler is already disabled. Change-Id: I3479cc3fb7af3c76ded67cf289f99547d0a55d21 BUG: 1370567 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/15329 Tested-by: Aravinda VK <avishwan@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* snapshot/cli: Fix snapshot status xml outputAvra Sengupta2016-08-231-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | snap status --xml errors out if a brick is down and doesn't have pid. It is handled in the cli of the snap status where "N/A" is displayed in such a scenario. Handled the same in xml snap status <snapname> --xml fails as the writer is not initialised for the same. Using GF_SNAP_STATUS_TYPE_ITER instead of GF_SNAP_STATUS_TYPE_SNAP for all snap's status to differentiate between the two scenarios. Added testcase volume-snapshot-xml.t to check all snapshot commands xml outputs Change-Id: I99563e8f3e84f1aaeabd865326bb825c44f5c745 BUG: 1325831 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/14018 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* Snapshot/xml:xml output for snapshot cloneMohammed Rafi KC2016-07-291-1/+1
| | | | | | | | | | | | | | | | | | Snapshot clone is used to create a regular volume from snapshot. Currently snapshot clone is not supporting xml outout. This change introduce a xml output for snapshot clone command Change-Id: I417b480d36f9d84ee088004999b041c9619edd50 BUG: 1207604 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/10065 Reviewed-by: Avra Sengupta <asengupt@redhat.com> Tested-by: Avra Sengupta <asengupt@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* glusterd/snapshot: free resource from the owner of memoryMohammed Rafi KC2016-06-141-22/+7
| | | | | | | | | | | | | | | | We are freeing memory from a function which is not the owner of the memory. Free should happen from the owner of resources. Change-Id: If8772ba27f9eb65881dcdddde8d7dc431c1c0ee8 BUG: 1341796 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/14634 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* glusterd/snapshot: remove quota related options from snap volfileMohammed Rafi KC2016-06-021-16/+137
| | | | | | | | | | | | | | | | | | | | enabling inode-quota on a snapshot volume is unnecessary, because snapshot is a read-only volume. So we don't need to enforce quota on a snapshot volume. This patch will remove the quota related options from snapshot volfile. Change-Id: Iddabcb83820dac2384924a01d45abe1ef1e95600 BUG: 1341796 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/14608 Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: N Balachandran <nbalacha@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* clone/snapshot: Save restored_from_snap for clonesAvra Sengupta2016-04-251-0/+3
| | | | | | | | | | | | | | | | | Bricks of cloned volumes are lvm bricks mounted in /run/gluster, which on reboot of the node gets cleared. Hence, these brick paths need to be recreated on glusterd restart and the appropriate lvms are mounted. Change-Id: I6da086288c0dbdcedf3a20fd53f25e3728bea473 BUG: 1328010 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/14021 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* snapshot/quota: Copy quota.cksum during snapshot operationsAvra Sengupta2016-04-211-21/+3
| | | | | | | | | | | | | | | | | | | | A volume having a quota.conf file, should always have a quota.cksum file too. Based on this above assumption modifying glusterd_copy_quota_files() to always copy quota.cksum, if quota.conf is present. This change will be reflected when a snapshot is created, restored and cloned. Change-Id: Ia49dc26eacef32eeb8f7d7d9553c80e304b08779 BUG: 1316848 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/13760 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Vijaikumar Mallikarjuna <vmallika@redhat.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* glusterd: remove unused large memory/buffer allocationsPrasanna Kumar Kalever2016-03-241-2/+0
| | | | | | | | | | | | | | This patch cleans dead buffer allocations which are never used in the code. Change-Id: I8c55837434fd5bf9dde9fb7b070fdefbf64cf4a3 BUG: 1253828 Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com> Reviewed-on: http://review.gluster.org/11928 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* snapshot/cli: Keep the dict keys uniformAvra Sengupta2016-03-131-1/+1
| | | | | | | | | | | | | | | snapshot info was using a different dictionary key as compared to other snapshot commands. This was throwing a recurring error log in cli.log Change-Id: I9eb9a4541c10a45ec7673a23c89c85a7dce9f3ec BUG: 1316819 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/13677 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* glusterd: use string comparison for realpath checks in ↵Atin Mukherjee2016-02-291-0/+16
| | | | | | | | | | | | | | | | | | | | | | glusterd_is_brickpath_available glusterd_is_brickpath_available () used to call realpath() for checking the whether the new brick path matches with the existing ones. The problem with this is if the underlying file system is bad for any one of the existing bricks then realpath() would fail and we wouldn't allow to create the new brick even if it should be allowed. Fix is to use string comparison with having a new field real_path in brickinfo to store the absolute path Change-Id: I1250ea5345f00fca0f6128056ebd08750d604f0a BUG: 1299710 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/13258 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* snapshot: Fix parent volinfo corruption in snapshot restoreAvra Sengupta2016-02-281-19/+83
| | | | | | | | | | | | | | | | | | | | | | | | | | Remove parent_volinfo irrespective of success or failure of glusterd_lvm_snapshot_remove(). This prevents the duplication of the volinfo after the execution of glusterd_snapshot_restore(). When commit fails on originator node, we don't perform commit on the other nodes, as a result we don't have a backup of /var/lib/glusterd/vols/<volname> in the GLUSTERD_TRASH in other nodes. But in the postvalidate we try to restore from GLUSTED_TRASH and end up cleaning up /var/lib/glusterd/vols/<volname>. Hence moved glusterd_snapshot_backup_vol() from commit to prevalidate, so that the backup is always available when a cleanup is needed. Change-Id: Icd471b23faf02bad680b9a1aadc4a0175f7cce8b BUG: 1300979 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/13282 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* Snapshot:wrong logging is usedMohammed Rafi KC2016-02-221-4/+4
| | | | | | | | | | | | Change-Id: I56e5f5696fbbb4290f95adb9b68f9e43ed037ed3 BUG: 1189473 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/9861 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* all: fixes for clang compile warningsKaleb S KEITHLEY2016-02-151-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | cli/src/cli-cmd-parser.c (chenk) cli/src/cli-xml-output.c (spandit) cli/src/cli.c (chenk) libglusterfs/src/common-utils.c (vmallika) libglusterfs/src/gfdb/gfdb_sqlite3.c (jfernand +1) rpc/rpc-transport/socket/src/socket.c (?) xlators/cluster/afr/src/afr-transaction.c (?) xlators/cluster/dht/src/dht-common.h (srangana +2) xlators/cluster/dht/src/dht-selfheal.c (srangana +2) xlators/debug/io-stats/src/io-stats.c (R. Wareing) xlators/features/barrier/src/barrier.c (vshastry) xlators/features/bit-rot/src/bitd/bit-rot-scrub.h (vshankar +1) xlators/features/shard/src/shard.c (kdhananj +1) xlators/mgmt/glusterd/src/glusterd-ganesha.c (skoduri) xlators/mgmt/glusterd/src/glusterd-handler.c (atinmu) xlators/mgmt/glusterd/src/glusterd-op-sm.h (atinmu) xlators/mgmt/glusterd/src/glusterd-snapshot.c (spandit) xlators/mgmt/glusterd/src/glusterd-syncop.c (atinmu) xlators/mgmt/glusterd/src/glusterd-volgen.c (atinmu) xlators/protocol/client/src/client-messages.h (mselvaga +1) xlators/storage/bd/src/bd-helper.c (M. Mohan Kumar) xlators/storage/bd/src/bd.c (M. Mohan Kumar) xlators/storage/posix/src/posix.c (nbalacha +1) Change-Id: I85934fbcaf485932136ef3acd206f6ebecde61dd BUG: 1293133 Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/13031 CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* all: fix various cppcheck warningsKaleb S KEITHLEY2016-02-151-2/+10
| | | | | | | | | | | | | | | fixes for various warnings reported by cppcheck N.B. cppcheck output is in the bugzilla Change-Id: I33acec127bc4536935fdd8d52a0c490ec54d50b2 BUG: 1292954 Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/13006 Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* snapshot/clone : Fix tier pause failure for snapshot cloneAvra Sengupta2015-12-021-13/+0
| | | | | | | | | | | | | | | | | | | | On a tiered volume, snapshot clone fails while trying to pause tier, as we pass volname(snap) to the brick_op_phase module, which tries to look for the snap volume amongst regular volumes, and obviously doesn't find it and fail. Well as snapshot volumes are read only volume, and will not have tiering daemon acting upon them, there is really no need to pause tiereing while taking clone of snapshot volumes. Hence removing the code to pause and resume tiering during clone create. Change-Id: I2266aba589a830a13a806c0d8a56fd8855143ccd BUG: 1279327 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/12548 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* snapshot: Fix quorum check for cloneAvra Sengupta2015-12-021-2/+11
| | | | | | | | | | | | | | | | | | | snapshot clone was not performing quorum check and was just relying on glusterd server quorum. Wrote glusterd_snap_quorum_check_for_clone(), to perform the same. Also moved common quorum check code from glusterd_snap_quorum_check_for_create(), to glusterd_snap_common_quorum_chk_clone_create() to be shared by both Change-Id: Ib78c709186841780876de8ef7d7c9243b7f67995 BUG: 1276023 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/12490 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* snapshot: Inherit snap-max-hard-limit from original volumeAvra Sengupta2015-11-021-1/+0
| | | | | | | | | | | | | | | | | | A snapshot should inherit snap-max-hard-limit from the original volume while being created and when being restored to, it should restore the same. Similarly a clone taken from a snapshot should inherit snap-max-hard-limit from the snapshot. Change-Id: If8e90e2ffc10e22086b803ac8e2638a16bcec968 BUG: 1275616 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/12437 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: mohammed rafi kc <rkavunga@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* snapshot : copying nfs-ganesha export fileJiffin Tony Thottan2015-10-301-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While taking snapshot, the export file used by the volume should copy to snap directory. So that when restore of snapshot happens, the volume can retain all its configuration for exporting via nfs-ganesha. The export file is stored at "/etc/ganesha/export" in the following format "export.<volname>.conf" The fix handles given cases in the following manner : case a: The nfs-ganesha(global) is ON during snapshot and restore. i.) Volume was exported during snapshot. When we restore snapshot, then volume should be exported back with old configuration file. ii.) Volume was unexported during snapshot. When we restore snapshot, then volume should unexported again. case b: The nfs-ganesha is ON during snapshot and OFF during restore Volume was exported during snapshot. When we restore snapshot, the conf will be copied to corresponding location and if nfs-ganesha enabled again, then volume will be exported. For the clones, export conf file will created in /etc/ganesha/export and then export it via ganesha. Change-Id: Ideecda15bd4db58e991cf6c8de7bb93f3db6cd20 BUG: 1257709 Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> Reviewed-on: http://review.gluster.org/12034 Reviewed-by: Avra Sengupta <asengupt@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* core: use syscall wrappers instead of direct syscalls -- glusterdKaleb S. KEITHLEY2015-10-281-12/+12
| | | | | | | | | | | | | | | various xlators and other components are invoking system calls directly instead of using the libglusterfs/syscall.[ch] wrappers. If not using the system call wrappers there should be a comment in the source explaining why the wrapper isn't used. Change-Id: I28bf2a5f7730b35914e7ab57fed91e1966b30073 BUG: 1267967 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/12379 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* cluster/tier: add pause tier for snapshotsDan Lambright2015-10-211-3/+164
| | | | | | | | | | | | | | | | | | | | Snaps of tiered volumes cannot handle files undergoing migration. We implement a helper mechanism to "pause" migration. Any files undergoing migration are aborted. Clean up is done to remove sticky bits and data at the destination. Migration is restarted after snap completes. For testing an internal switch is added. It is not exposed externally. gluster volume set vol1 tier-pause [true|false] Change-Id: Ia85bbf89ac142e9b7e73fcbef98bb9da86097799 BUG: 1267950 Signed-off-by: Dan Lambright <dlambrig@redhat.com> Reviewed-on: http://review.gluster.org/12304 Reviewed-by: N Balachandran <nbalacha@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* snapshot: Fix snapshot clone postvalidateAvra Sengupta2015-10-201-46/+52
| | | | | | | | | | | | | | | | | | | | | | | | | In glusterd_snapshot_clone_postvalidate(), we were deleting snap object and snap vol, by looking up snapname. Hence, it was deleting the orignal snapshot from which the clone was being created Instead it should fetch the clonename, the respective clone vol, and its corresponding snap object, and delete them. Also glusterd_snap_remove(), needs to differentiate a clone snap object from a snaphsot snap object, as in case of a clone snap object, we don't have any persisted data in /var/run/gluster/snaps/ and hence is shouldn't try to delete anything there. Change-Id: I02bb22a3898d5720e318a02d6cc32d25f75d317d BUG: 1272339 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/12364 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: mohammed rafi kc <rkavunga@redhat.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* all: reduce "inline" usageJeff Darcy2015-09-011-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | There are three kinds of inline functions: plain inline, extern inline, and static inline. All three have been removed from .c files, except those in "contrib" which aren't our problem. Inlines in .h files, which are overwhelmingly "static inline" already, have generally been left alone. Over time we should be able to "lower" these into .c files, but that has to be done in a case-by-case fashion requiring more manual effort. This part was easy to do automatically without (as far as I can tell) any ill effect. In the process, several pieces of dead code were flagged by the compiler, and were removed. Change-Id: I56a5e614735c9e0a6ee420dab949eac22e25c155 BUG: 1245331 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/11769 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* gluster/cli: snapshot delete all does not work with xmlRajesh Joseph2015-08-281-5/+6
| | | | | | | | | | | | | Problem: snapshot delete all command fails with --xml option Fix: Provided xml support for delete all command Change-Id: I77cad131473a9160e188c783f442b6a38a37f758 BUG: 1257533 Signed-off-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-on: http://review.gluster.org/12027 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Avra Sengupta <asengupt@redhat.com>
* snapshot:cleanup snaps during unprobeMohammed Rafi KC2015-08-261-22/+1
| | | | | | | | | | | | | | | When doing an unprobe, the volume that doesnot contain any brick of the particular node will be deleted. So the snaps associated with that volume should also delete Change-Id: I9f3d23bd11b254ebf7d7722cc1e12455d6b024ff BUG: 1203185 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/9930 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Avra Sengupta <asengupt@redhat.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* snapshot: Log deletion of snapshot, during auto-deleteAvra Sengupta2015-08-231-1/+7
| | | | | | | | | | | | | | | | | When auto-delete is enabled, and soft-limit is reached, on creation of a snapshot, the oldest snapshot for that volume is deleted. Displaying a warning log before deleting the oldest snapshot. Change-Id: I75f0366935966a223b63a4ec5ac13f9fe36c0e82 BUG: 1255310 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/11963 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: mohammed rafi kc <rkavunga@redhat.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* glusterd: initialize the daemon services on demandAtin Mukherjee2015-07-271-10/+0
| | | | | | | | | | | | | | | | | | | | | | As of now all the daemon services are initialized at glusterD init path. Since socket file path of per node daemon demands the uuid of the node, MY_UUID macro is invoked as part of the initialization. The above flow breaks the usecases where a gluster image is built following a template could be Dockerfile, Vagrantfile or any kind of virtualization environment. This means bringing instances of this image would have same UUIDs for the node resulting in peer probe failure. Solution is to lazily initialize the services on demand. Change-Id: If7caa533026c83e98c7c7678bded67085d0bbc1e BUG: 1238135 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/11488 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Gaurav Kumar Garg <ggarg@redhat.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* glusterd: Porting left out log messages to new frameworkNandaja Varma2015-06-261-1/+2
| | | | | | | | | | | Change-Id: I70d40ae3b5f49a21e1b93f82885cd58fa2723647 BUG: 1235538 Signed-off-by: Nandaja Varma <nandaja.varma@gmail.com> Reviewed-on: http://review.gluster.org/11388 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Anand Nekkunti <anekkunt@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* glusterd/uss/snapshot: Intialise snapdsvc after volfiles are createdAvra Sengupta2015-06-221-9/+9
| | | | | | | | | | | | | snapd svc should be initialised only after all relevant volfiles and directories are created. Change-Id: I96770cfc0b350599cd60ff74f5ecec08145c3105 BUG: 1231197 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/11227 Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* glusterd: coverity fix for string overflowSakshi Bansal2015-06-101-1/+2
| | | | | | | | | | | | | | | | | Coverity CID: 1222523 Coverity CID: 1210990 Coverity CID: 1229877 Coverity CID: 1229876 Coverity CID: 1124855 Change-Id: Iba615724909216f923074cb4585940b919d02166 BUG: 789278 Signed-off-by: Sakshi Bansal <sabansal@redhat.com> Reviewed-on: http://review.gluster.org/9555 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com>
* snapshot: Fix finding brick mount path logicAvra Sengupta2015-06-051-1/+0
| | | | | | | | | | | | | | | | | | | | | | Previously while finding brick mount paths of snap volume's bricks, we were taking brick order into consideration. This logic fails when a brick is removed or a tier is added. Hence modifying the logic to look for the first occurence of the word "brick" in the brick path. From there we iterate till we find a '/'. The string till the first '/' after we encounter the word brick is the brick mount path. Change-Id: Ic85983c4e975e701cdfd4e13f8e276ac391a3e49 BUG: 1227646 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/11060 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com>
* glusterd/shared_storage: Provide a volume set option to create and mount the ↵Avra Sengupta2015-06-041-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | shared storage Introducing a global volume set option(cluster.enable-shared-storage) which helps create and set-up the shared storage meta volume. gluster volume set all cluster.enable-shared-storage enable On enabling this option, the system analyzes the number of peers in the cluster, which are currently connected, and chooses three such peers(including the node the command is issued from). From these peers a volume(gluster_shared_storage) is created. Depending on the number of peers available the volume is either a replica 3 volume(if there are 3 connected peers), or a replica 2 volume(if there are 2 connected peers). "/var/run/gluster/ss_brick" serves as the brick path on each node for the shared storage volume. We also mount the shared storage at "/var/run/gluster/shared_storage" on all the nodes in the cluster as part of enabling this option. If there is only one node in the cluster, or only one node is up then the command will fail Once the volume is created, and mounted the maintainance of the volume like adding-bricks, removing bricks etc., is expected to be the onus of the user. On disabling the option, we provide the user a warning, and on affirmation from the user we stop the shared storage volume, and unmount it from all the nodes in the cluster. gluster volume set all cluster.enable-shared-storage disable Change-Id: Idd92d67b93f444244f99ede9f634ef18d2945dbc BUG: 1222013 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/10793 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com>
* glusterd/snapshot: Return correct errno in events of failure - PATCH 2Avra Sengupta2015-06-021-40/+136
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | ENUM RETCODE ERROR ------------------------------------------------------------- EG_INTRNL 30800 Internal Error EG_OPNOTSUP 30801 Gluster Op Not Supported EG_ANOTRANS 30802 Another Transaction in Progress EG_BRCKDWN 30803 One or more brick is down EG_NODEDWN 30804 One or more node is down EG_HRDLMT 30805 Hard Limit is reached EG_NOVOL 30806 Volume does not exist EG_NOSNAP 30807 Snap does not exist EG_RBALRUN 30808 Rebalance is running EG_VOLRUN 30809 Volume is running EG_VOLSTP 30810 Volume is not running EG_VOLEXST 30811 Volume exists EG_SNAPEXST 30812 Snapshot exists EG_ISSNAP 30813 Volume is a snap volume EG_GEOREPRUN 30814 Geo-Replication is running EG_NOTTHINP 30815 Bricks are not thinly provisioned Change-Id: I49a170cdfd77df11fe677e09f4e063d99b159275 BUG: 1212413 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/10588 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com>
* build: do not #include "config.h" in each fileNiels de Vos2015-05-291-5/+0
| | | | | | | | | | | | | | | | | | Instead of including config.h in each file, and have the additional config.h included from the compiler commandline (-include option). When a .c file tests for a certain #define, and config.h was not included, incorrect assumtions were made. With this change, it can not happen again. BUG: 1222319 Change-Id: I4f9097b8740b81ecfe8b218d52ca50361f74cb64 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/10808 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* Snapshot: New logging framework implementation of snapshot messages.Nandaja Varma2015-04-271-574/+1096
| | | | | | | | | | Change-Id: I3e8b5f6ae59d16752beb8053c2afddfb5c00be14 BUG: 1194640 Signed-off-by: Nandaja Varma <nandaja.varma@gmail.com> Reviewed-on: http://review.gluster.org/9796 Tested-by: NetBSD Build System Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Avra Sengupta <asengupt@redhat.com>
* glusterd: initialize snapd svc at volume restore pathAtin Mukherjee2015-04-261-0/+1
| | | | | | | | | | | | | | | | In restore path snapd svc was not initialized because of which any glusterd instance which went down and came back may have uninitialized snapd svc. The reason I used 'may' is because depending on the nodes in the cluster. In a single node cluster this wouldn't be a problem since glusterd_spawn_daemon takes care of initializing it. Change-Id: I2da1e419a0506d3b2742c1cf39a3b9416eb3c305 BUG: 1213295 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/10304 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System Reviewed-by: Kaushal M <kaushal@redhat.com>
* glusterd/snapshot: Fix memory leak while using scandirSaravanakumar Arumugam2015-04-161-0/+8
| | | | | | | | | | | | | | | | scandir allocates memory for dirent entries. Ensure to free them up once they are used. Noticed this while looking for a sample scandir implementation. Change-Id: Iff5f76e93e698d3f454f273d9dd7d9a15cf63953 BUG: 1196027 Signed-off-by: Saravanakumar Arumugam <sarumuga@redhat.com> Reviewed-on: http://review.gluster.org/9739 Reviewed-by: Sachin Pandit <spandit@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd/snapshot : While snapshot restore, compute quota checksum.Sachin Pandit2015-04-101-3/+24
| | | | | | | | | | | | | | | | | | Problem : During snapshot restore we anyways copy the quota conf file after that we need to compute the checksum for that. If not, there might be a checksum mismatch during glusterd handshake. Solution : Compute a checksum file for quota conf file if its present. Change-Id: Ic4a6567c6ede9923443abf4ca59380679be88094 BUG: 1202436 Signed-off-by: Sachin Pandit <spandit@redhat.com> Reviewed-on: http://review.gluster.org/9901 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Avra Sengupta <asengupt@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* Snapshot: Remove brick details on snapshot create errorMohammed Rafi KC2015-04-091-6/+8
| | | | | | | | | | | | | | Since we are not providing complete details of stopped bricks on snapshot create error, it is better to remove the incomplete brick details. BUG: 1205596 Change-Id: I73386059c0d29a6cbe7f2bb6834d8b8fb393db0a Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/9999 Reviewed-by: Avra Sengupta <asengupt@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Avoid conflict between contrib/uuid and system uuidEmmanuel Dreyfus2015-04-041-29/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | glusterfs relies on Linux uuid implementation, which API is incompatible with most other systems's uuid. As a result, libglusterfs has to embed contrib/uuid, which is the Linux implementation, on non Linux systems. This implementation is incompatible with systtem's built in, but the symbols have the same names. Usually this is not a problem because when we link with -lglusterfs, libc's symbols are trumped. However there is a problem when a program not linked with -lglusterfs will dlopen() glusterfs component. In such a case, libc's uuid implementation is already loaded in the calling program, and it will be used instead of libglusterfs's implementation, causing crashes. A possible workaround is to use pre-load libglusterfs in the calling program (using LD_PRELOAD on NetBSD for instance), but such a mechanism is not portable, nor is it flexible. A much better approach is to rename libglusterfs's uuid_* functions to gf_uuid_* to avoid any possible conflict. This is what this change attempts. BUG: 1206587 Change-Id: I9ccd3e13afed1c7fc18508e92c7beb0f5d49f31a Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/10017 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* Xlators : Fixed typosManikandan Selvaganesh2015-04-021-2/+2
| | | | | | | | | | | Change-Id: I948f85cb369206ee8ce8b8cd5e48cae9adb971c9 BUG: 1075417 Signed-off-by: Manikandan Selvaganesh <mselvaga@redhat.com> Reviewed-on: http://review.gluster.org/9529 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com>
* glusterd: replace glusterd_volinfo_delete calls with glusterd_volinfo_unrefAtin Mukherjee2015-03-301-15/+3
| | | | | | | | | | | | | volinfo has its own ref counting mechanism. While deleting a volinfo object its always wiser to check there is 0 reference to it and then delete it. Change-Id: I446bd83432bd94aa19e29c6026367dfc1231786f BUG: 1183463 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/9462 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
generated by cgit (git 2.34.1) at 2024-05-20 07:11:17 +0000