| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
GlusterD as of now was blindly assuming that the brick port which was already
allocated would be available to be reused and that assumption is absolutely
wrong.
Solution : On first attempt, we thought GlusterD should check if the already
allocated brick ports are free, if not allocate new port and pass it to the
daemon. But with that approach there is a possibility that if PMAP_SIGNOUT is
missed out, the stale port will be given back to the clients where connection
will keep on failing. Now given the port allocation always start from base_port,
if everytime a new port has to be allocated for the daemons, the port range will
still be under control. So this fix tries to clean up old port using
pmap_registry_remove () if any and then goes for pmap_registry_alloc ()
Change-Id: If54a055d01ab0cbc06589dc1191d8fc52eb2c84f
BUG: 1221623
Signed-off-by: Atin Mukherjee <amukherj@redhat.com>
Reviewed-on: http://review.gluster.org/15005
Smoke: Gluster Build System <jenkins@build.gluster.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Avra Sengupta <asengupt@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When a volume is deleted, the freed up ports are never considered for further
allocation since pmap_registry_alloc () always starts scanning from last_alloc.
So in use cases where gluster volumes are frequently created and deleted
managing ports become nightmare as for every new volume creation ports need to
be opened up by the admin based on the volume topology.
Solution: Instead of scanning from last_alloc, pmap_registry_alloc () always
starts from base_port now. What that means is glusterd will always try to find
out the ports which have been freed from earlier volumes and reallocate them for
the newer ones. There could be possibilities that when a volume is stopped and
started back their brick ports are changed which is completely acceptible IMHO.
Change-Id: I99ccc11732b6a75527fcb6abafaf249ed02b3b78
BUG: 1221623
Signed-off-by: Atin Mukherjee <amukherj@redhat.com>
Reviewed-on: http://review.gluster.org/14939
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
Smoke: Gluster Build System <jenkins@build.gluster.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We use signin, but not signup. Having both just introduces confusion.
The proc number has been retained to avoid changes to the numbering of
other procs, and the mapping to a name has similarly been retained as a
placeholder, but the code and structure definitions have been removed.
Change-Id: I60f64f3b5d71ba6ed6862b36a38f90a9c8271c9f
Signed-off-by: Jeff Darcy <jdarcy@redhat.com>
Reviewed-on: http://review.gluster.org/14792
Smoke: Gluster Build System <jenkins@build.gluster.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If a brick process is killed ungracefully then GlusterD wouldn't receive a
PMAP_SIGNOUT event and hence the stale port details wouldn't be removed out.
Now consider the following case:
1. Create a volume with 1 birck
2. Start the volume (say brick port allocated is 49152)
3. Kill the brick process by 'kill -9'
4. Stop & delete the volume
5. Recreate the volume and start it. (Now the brick port gets 49153)
6. Mount the volume
Now in step 6 mount will fail as GlusterD will provide back the stale port
number given the query starts searching from the base_port.
Solution:
To avoid this, searching for port from last_alloc and coming down to base_port
should solve the issue.
Change-Id: I9afafd722a7fda0caac4cc892605f4e7c0e48e73
BUG: 1334270
Signed-off-by: Atin Mukherjee <amukherj@redhat.com>
Reviewed-on: http://review.gluster.org/14268
Smoke: Gluster Build System <jenkins@build.gluster.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Samikshan Bairagya <samikshan@gmail.com>
Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In glusterd_get_brickinfo () brick's hostname is address resolved. This adds an
unnecessary latency since it uses calls like getaddrinfo (). Instead given the
local brick's uuid is already known a comparison of MY_UUID and brickinfo->uuid
is much more light weight than the previous approach.
On a scale testing where cluster hosting ~400 volumes spanning across 4 nodes,
if a node goes for a reboot, few of the bricks don't come up. After few days of
analysis its found that glusterd_pmap_sigin () was taking signficant amount of
latency and further code walthrough revealed this unnecessary address
resolution. Applying this fix solves the issue and now all the brick processes
come up on a node reboot.
Change-Id: I299b8660ce0da6f3f739354f5c637bc356d82133
BUG: 1352279
Signed-off-by: Atin Mukherjee <amukherj@redhat.com>
Reviewed-on: http://review.gluster.org/14849
Smoke: Gluster Build System <jenkins@build.gluster.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Prashanth Pai <ppai@redhat.com>
Reviewed-by: Samikshan Bairagya <samikshan@gmail.com>
Reviewed-by: Kaushal M <kaushal@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch also mops the port max i.e 65535 hard coding
Change-Id: Ia93656d75ceb4c6c4849f9e0ad1b260d5952d4c6
BUG: 1331253
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Reviewed-on: http://review.gluster.org/14096
Tested-by: Prasanna Kumar Kalever <pkalever@redhat.com>
Smoke: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch fix couple of things mentioned below:
1. previously we use to try to connect on only GF_PMAP_PORT_FREE
in the pmap_registry_alloc(), it could happen that some foreign process
would have freed the port by this time ?, hence it is worth giving a try on
GF_PMAP_PORT_FOREIGN ports as well instead of wasting them all.
2. fix pmap_registry_remove() to mark the port asGF_PMAP_PORT_FREE
3. added useful comments on gf_pmap_port_type enum members
Change-Id: Id2aa7ad55e76ae3fdece21bed15792525ae33fe1
BUG: 1322805
Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com>
Reviewed-on: http://review.gluster.org/14080
Tested-by: Prasanna Kumar Kalever <pkalever@redhat.com>
Smoke: Gluster Build System <jenkins@build.gluster.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
It does not make sense to keep track of free ports from 0 to base_port
if we are not going to use them.
glusterd start times without this patch
2.622
2.478
2.455
2.590
2.400
glusterd start times with this patch
1.9
1.9
1.9
2.0
2.0
1.8
We save around half a second for every glusterd start.
BUG: 1322237
Change-Id: I0456689d0afad50dd068f2325ebfca9bdeffe01a
Signed-off-by: Raghavendra Talur <rtalur@redhat.com>
Reviewed-on: http://review.gluster.org/13841
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
Smoke: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
various xlators and other components are invoking system calls
directly instead of using the libglusterfs/syscall.[ch] wrappers.
If not using the system call wrappers there should be a comment
in the source explaining why the wrapper isn't used.
Change-Id: I28bf2a5f7730b35914e7ab57fed91e1966b30073
BUG: 1267967
Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com>
Reviewed-on: http://review.gluster.org/12379
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I56ced6fca0246c230cc389132c47a0f60472ed0c
BUG: 1194640
Signed-off-by: Nandaja Varma <nandaja.varma@gmail.com>
Reviewed-on: http://review.gluster.org/9836
Tested-by: NetBSD Build System <jenkins@build.gluster.org>
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Instead of including config.h in each file, and have the additional
config.h included from the compiler commandline (-include option).
When a .c file tests for a certain #define, and config.h was not
included, incorrect assumtions were made. With this change, it can not
happen again.
BUG: 1222319
Change-Id: I4f9097b8740b81ecfe8b218d52ca50361f74cb64
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Reviewed-on: http://review.gluster.org/10808
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Tested-by: NetBSD Build System
Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When we try to mount a tcp,rdma volume as rdma
transport using FUSE protocol, then mount will
hang if the brick is down. When we kill a process,
signal will be received in glusterfsd process and
it will call pmap_signout with port listening on tcp only.
In case of the tcp,rdma there will be two ports,
and port which is listening for rdma will not
called for sign out.
So the mount process will try to connect to a port
which is not open and it will keep trying to connect.
This patch will call pmap_signout for rdma port also,
So when mount tries to get the brick port,it will fail.
Change-Id: I23676f65f96eb90b69b76478f7a21412a6aba70f
BUG: 1143886
Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com>
Reviewed-on: http://review.gluster.org/8762
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com>
Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
Tested-by: Raghavendra G <rgowdapp@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
While accessing the procedures of given RPC program in,
rpcsvc_get_program_vector_sizer(), It was not checking boundary
conditions which would cause buffer overflow and subsequently SEGV.
Make sure rpcsvc_actor_t arrays have numactors number of actors.
FIX:
Validate the RPC procedure number before fetching the actor.
Special Thanks to: Murray Ketchion, Grant Byers
Change-Id: I8b5abd406d47fab8fca65b3beb73cdfe8cd85b72
BUG: 1096020
Signed-off-by: Santosh Kumar Pradhan <spradhan@redhat.com>
Reviewed-on: http://review.gluster.org/7726
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
Reviewed-by: Anand Avati <avati@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is (arguably) a hack to work around a bug in libvirt which is not
well behaved wrt to using TCP ports in the unreserved space between
49152-65535. (See RFC 6335)
Normally glusterd starts and binds to the first available port in range,
usually 49152. libvirt's live migration also tries to use ports in this
range, but has no fallback to use (an)other port(s) when the one it wants
is already in use.
Change-Id: Id8fe35c08b6ce4f268d46804bbb6dddab7a6b7bb
BUG: 1018178
Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com>
Reviewed-on: http://review.gluster.org/6210
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Anand Avati <avati@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Duplicate request cache provides a mechanism for detecting
duplicate rpc requests from clients. DRC caches replies
and on duplicate requests, sends the cached reply instead of
re-processing the request.
Change-Id: I3d62a6c4aa86c92bf61f1038ca62a1a46bf1c303
BUG: 847624
Signed-off-by: Rajesh Amaravathi <rajesh@redhat.com>
Reviewed-on: http://review.gluster.org/4049
Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Anand Avati <avati@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There are primarily three lists that are part of glusterd process,
that are concurrently accessed. Namely, priv->volumes, priv->peers
and volinfo->bricks_list.
Big-lock approach
-----------------
WHAT IS IT?
Big lock is a coarse-grained lock which protects all three
lists, mentioned above, from racy access.
HOW DOES IT WORK?
At any given point in time, glusterd's thread(s) are in execution
_iff_ there is a preceding, inbound network event. Of course, the
sigwaiter thread and timer thread are exceptions.
A network event is an external trigger to glusterd, via the epoll
thread, in the form of POLLIN and POLLERR.
As long as we take the big-lock at all such entry points and yield
it when we are done, we are guaranteed that all the network events,
accessing the global lists, are serialised.
This amounts to holding the big lock at
- all the handlers of all the actors in glusterd. (POLLIN)
- all the cbks in glusterd. (POLLIN)
- rpc_notify (DISCONNECT event), if we access/modify
one of the three lists. (POLLERR)
In the case of synctask'ized volume operations, we must remember that,
if we held the big lock for the entire duration of the handler,
we may block other non-synctask rpc actors from executing.
For eg, volume-start would block in PMAP SIGNIN, if done incorrectly.
To prevent this, we need to yield the big lock, when we yield the
synctask, and reacquire on waking up of the synctask.
Change-Id: Ib929f9905b55fb6c3fc27fefb497a26dba058e4f
BUG: 948686
Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com>
Reviewed-on: http://review.gluster.org/4784
Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
Tested-by: Gluster Build System <jenkins@build.gluster.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch fixes the success check for xdr_to_generic function across the
codebase.
Also, cleans up the brick_op actors table in glusterfsd-mgmt.c to make sure that
the actors are called directly by rpcsvc.
Change-Id: I3086585f30c44f69f1bc83665f89e30025f76d3a
BUG: 884452
Signed-off-by: Kaushal M <kaushal@redhat.com>
Reviewed-on: http://review.gluster.org/4278
Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Anand Avati <avati@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
License message changed for server-side, dual license GPLV2 and LGPLv3+.
Change-Id: Ia9e53061b9d2df3b3ef3bc9778dceff77db46a09
BUG: 852318
Signed-off-by: Varun Shastry <vshastry@redhat.com>
Reviewed-on: http://review.gluster.org/3940
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
Reviewed-by: Anand Avati <avati@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The license message is changed to
Copyright (c) 2008-2012 Red Hat, Inc. <http://www.redhat.com>
This file is part of GlusterFS.
This file is licensed to you under your choice of the GNU Lesser
General Public License, version 3 or any later version (LGPLv3 or
later), or the GNU General Public License, version 2 (GPLv2), in all
cases as published by the Free Software Foundation.
Change-Id: I07d2b63ed5fbbbd1884f1e74f2dd56013d15b0f4
BUG: 852318
Signed-off-by: Varun Shastry <vshastry@redhat.com>
Reviewed-on: http://review.gluster.org/3858
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The .vector_actor method of rpcsvc_actor_desc is defunct now after
rpc unification. Remove the field and all related usage of it.
Change-Id: I53048cebeae78f50259e8c4a7fec3497691fe388
BUG: 762935
Signed-off-by: Anand Avati <avati@redhat.com>
Reviewed-on: http://review.gluster.org/3832
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com>
Reviewed-by: Amar Tumballi <amarts@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
See comments in http://bugzilla.redhat.com/839925 for
the code to perform this change.
Signed-off-by: Jim Meyering <meyering@redhat.com>
BUG: 839925
Change-Id: I10e4ecff16c3749fe17c2831c516737e08a3205a
Reviewed-on: http://review.gluster.com/3661
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Anand Avati <avati@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
| |
RFC 6335
Change-Id: Iafbba70d24db95807ae73d27c96288d18d7232e5
Signed-off-by: Amar Tumballi <amar@gluster.com>
BUG: 824233
Reviewed-on: http://review.gluster.com/3339
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Anand Avati <avati@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently we allow the following RPC messages for unprivileged users:
GLUSTER_CLI_GETWD, GLUSTER_CLI_MOUNT, GLUSTER_CLI_UMOUNT
Change-Id: I05414f3ca7cbe47de45c5e5cfba1537efc774e6c
BUG: 781256
Signed-off-by: Csaba Henk <csaba@gluster.com>
Reviewed-on: http://review.gluster.com/2641
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Anand Avati <avati@gluster.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
GF_HNDSK_NULL is not suitable for gluster_pmap_actors, instead use
GF_PMAP_NULL. The actual value (0) is not different for these, so there
is no fuctional change.
Change-Id: Ibb998ebae88b457c57a42ce63dad095d2d4a22c5
BUG: 772468
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Reviewed-on: http://review.gluster.com/2603
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Amar Tumballi <amar@gluster.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Earlier:
step 1: copy the existing <xdr>.x files to /tmp
step 2: generate '.[ch]' files using 'rpcgen <xdr>.x'
step 3: check diff with the to the existing files, add only your part
of changes back to the original file. (ignore other changes).
step 4: there is another file to write wrapper functions to convert
structures to/from XDR buffers, update it with your new structure.
step 5: use these wrapper functions in the newly written procedures.
step 6: commit :-|
Now:
step 1: update (mostly adding only) the <xdr>.x file
step 2: run '<path-to-src>/extras/generate-xdr-files.sh <xdr>.x' command
step 3: implement rpc procedure to handle the request/response.
step 4: commit :-)
Change-Id: I219f9159fc980438c86e847c6b030be96e595ea2
BUG: 3488
Reviewed-on: http://review.gluster.com/341
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Anand Avati <avati@gluster.com>
|
|
|
|
|
|
|
|
| |
Change-Id: I2d10f2be44f518f496427f257988f1858e888084
BUG: 3348
Reviewed-on: http://review.gluster.com/200
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Anand Avati <avati@gluster.com>
|
|
|
|
|
|
|
|
| |
Change-Id: I3914467611e573cccee0d22df93920cf1b2eb79f
BUG: 3348
Reviewed-on: http://review.gluster.com/182
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Anand Avati <avati@gluster.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
By using variable iobufs, xfer data size is no more limited to
128K (default). This helps in scaling.
Change-Id: Iab453db9223d887306d150cd6fe0b1eae9c422cc
BUG: 2472
Reviewed-on: http://review.gluster.com/13
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Amar Tumballi <amar@gluster.com>
Reviewed-by: Anand Avati <avati@gluster.com>
|
|
|
|
|
|
|
|
| |
Signed-off-by: Pranith Kumar K <pranithk@gluster.com>
Signed-off-by: Vijay Bellur <vijay@dev.gluster.com>
BUG: 1965 (need a cmd to get io-stat details)
URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=1965
|
|
|
|
|
|
|
|
| |
Signed-off-by: Amar Tumballi <amar@gluster.com>
Signed-off-by: Vijay Bellur <vijay@dev.gluster.com>
BUG: 1870 (Change the port from 69* to some other ports.)
URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=1870
|
|
|
|
|
|
|
|
| |
Signed-off-by: Pranith Kumar K <pranithk@gluster.com>
Signed-off-by: Vijay Bellur <vijay@dev.gluster.com>
BUG: 1736 (implement volume start force)
URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=1736
|
|
|
|
|
|
|
|
|
|
| |
Patches from Vijay and Shishir have been pulled in into this one big patch.
Signed-off-by: Pavan Vilas Sondur <pavan@gluster.com>
Signed-off-by: Vijay Bellur <vijay@dev.gluster.com>
BUG: 1235 (Bug for all pump/migrate commits)
URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=1235
|
|
|
|
|
|
|
|
|
|
| |
This is only done is the volume is started.
Signed-off-by: shishir gowda <shishirng@gluster.com>
Signed-off-by: Vijay Bellur <vijay@dev.gluster.com>
BUG: 1562 (insufficient consistency check on start of glusterd)
URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=1562
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Rationale: if a brick serves multiple volumes, all of them need
to be registered for the port the brick server listens on.
Implementation: to register volumes "foo" and "bar" for port 6543,
you have to send a SIGNUP for brick: "foo bar", port: 6543.
Upon a pmap lookup, we match the search term to
whitespace tokenized bricknames on server side.
Signed-off-by: Csaba Henk <csaba@gluster.com>
Signed-off-by: Vijay Bellur <vijay@dev.gluster.com>
BUG: 1570 (geosync related changes)
URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=1570
|
|
|
|
|
|
|
|
| |
Signed-off-by: Csaba Henk <csaba@gluster.com>
Signed-off-by: Vijay Bellur <vijay@dev.gluster.com>
BUG: 1570 (geosync related changes)
URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=1570
|
|
|
|
|
|
|
|
| |
Signed-off-by: Pranith Kumar K <pranithk@gluster.com>
Signed-off-by: Vijay Bellur <vijay@dev.gluster.com>
BUG: 1186 ()
URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=1186
|
|
|
|
|
|
|
|
|
|
| |
removing
Signed-off-by: Raghavendra Bhat <raghavendrabhat@gluster.com>
Signed-off-by: Vijay Bellur <vijay@dev.gluster.com>
BUG: 1580 ()
URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=1580
|
|
|
|
|
|
|
|
|
|
|
| |
* if 'brickinfo->port' exists use it instead of pmap_registry_alloc(),
hence a brick after stop/start starts on same port
Signed-off-by: Amar Tumballi <amar@gluster.com>
Signed-off-by: Vijay Bellur <vijay@dev.gluster.com>
BUG: 1473 (reuse the ports while starting 'glusterfsd')
URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=1473
|
|
|
|
|
|
|
|
| |
Signed-off-by: Amar Tumballi <amar@gluster.com>
Signed-off-by: Anand V. Avati <avati@dev.gluster.com>
BUG: 1314 (portmapper functionality)
URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=1314
|
|
|
|
|
|
|
|
|
|
|
| |
* some bug fixes glusterd-pmap.c
* also renamed 'fetch-spec.c' -> 'glusterfsd-mgmt.c'
Signed-off-by: Amar Tumballi <amar@gluster.com>
Signed-off-by: Anand V. Avati <avati@dev.gluster.com>
BUG: 1314 (portmapper functionality)
URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=1314
|
|
|
|
|
|
|
|
| |
Signed-off-by: Pranith Kumar K <pranithk@gluster.com>
Signed-off-by: Anand V. Avati <avati@dev.gluster.com>
BUG: 1388 ()
URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=1388
|
|
|
|
|
|
|
|
|
|
|
| |
* in bind, initialize the array index to port
* in search, check if brickname is NULL
Signed-off-by: Amar Tumballi <amar@gluster.com>
Signed-off-by: Anand V. Avati <avati@dev.gluster.com>
BUG: 1363 (crash is pmap_registry_search())
URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=1363
|
|
|
|
|
|
|
|
| |
Signed-off-by: Anand V. Avati <avati@blackhole.gluster.com>
Signed-off-by: Anand V. Avati <avati@dev.gluster.com>
BUG: 1346 ()
URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=1346
|
|
Signed-off-by: Anand V. Avati <avati@blackhole.gluster.com>
Signed-off-by: Anand V. Avati <avati@dev.gluster.com>
BUG: 1314 (portmapper functionality)
URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=1314
|