summaryrefslogtreecommitdiffstats
path: root/xlators/mgmt/glusterd/src/glusterd-op-sm.c
Commit message (Collapse)AuthorAgeFilesLines
* glusterd: Prevent rebalance starting with old clientsKaushal M2014-09-031-38/+0
| | | | | | | | | | | | | | | | | Glusterd will prevent rebalance from starting when clients older than glusterfs-v3.6.0 are connected to a volume. This is needed as running rebalance with old clients connected could lead to data loss in some cases. The DHT xlator on newer clients (>= 3.6.0) has been fixed to prevent the data loss issues. Change-Id: If58640236382a2fc13f73f6b43777f01713859f7 BUG: 1136201 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/8583 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* glusterd: Avoid spurious WARNING 'op_ctx modification failed'Harshavardhana2014-07-241-2/+35
| | | | | | | | | | | | | | This patch fixes by wrapping this whole scenario and skips op_ctx modification for necessary commands. Change-Id: I3ecec19caefdc699d9a2dabfb456a89758ae4aa4 BUG: 1066529 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/8337 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* glusterd: Improvements to peer identificationKaushal M2014-07-151-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch improves the peer identification mechanism in glusterd and lays down the framework for further improvements, including better multi network support in glusterd. This patch mainly does two things, 1. Extend the peerinfo object to store a list of addresses instead of a single hostname as it does now. This also includes changes to make the peer update behaviour of 'peer probe' to add to the list. 2. Improve glusterd_friend_find_by_hostname() to perform better matching of hostnames. glusterd_friend_find_by_hostname() now does and initial quick string compare against all the peer addresses known to glusterd, after which it tries a more thorough search using address resolution and matching the struc sockaddr's. The above two changes together improve the peer identification situation in glusterd a lot. More information regarding the problem this patch attempts to resolve and the approach chosen can be found at http://www.gluster.org/community/documentation/index.php/Features/Better_peer_identification This commit is a squashed commit of the following changes, the development branch of which can be viewed at, https://github.com/kshlm/glusterfs/tree/better-peer-identification or, https://forge.gluster.org/~kshlm/glusterfs-core/kshlms-glusterfs/commits/better-peer-identification commit 198f86e60fab74faf082eaa02657a4d8f60b92f0 Author: Kaushal M <kaushal@redhat.com> Date: Tue Jul 15 14:34:06 2014 +0530 Update gluster.8 commit 35d597f3a6b3248373e727f7b7e889c92554d56c Author: Kaushal M <kaushal@redhat.com> Date: Tue Jul 15 09:01:01 2014 +0530 Address review comments https://review.gluster.org/#/c/8238/3 commit 47b5331e17304477322bd2daed5bbed503c34ca1 Merge: c71b12c 78128af Author: Kaushal M <kaushal@redhat.com> Date: Tue Jul 15 08:41:39 2014 +0530 Merge branch 'master' into better-peer-identification commit c71b12c164330e8d19d1df4734ab34ef9a8caad2 Merge: 57bc9de 0f5719a Author: Kaushal M <kaushal@redhat.com> Date: Thu Jul 10 19:50:19 2014 +0530 Merge branch 'master' into better-peer-identification commit 57bc9de9e4f49ff2b1620df9906cda50a3527a25 Author: Kaushal M <kaushal@redhat.com> Date: Thu Jul 10 19:49:08 2014 +0530 More fixes to review comments commit 5482cc363a687a9e246a0780ec88acd53e218501 Author: Kaushal M <kaushal@redhat.com> Date: Thu Jul 10 18:36:40 2014 +0530 Code refactoring in peer-utils based on review comments https://review.gluster.org/#/c/8238/2/xlators/mgmt/glusterd/src/glusterd-peer-utils.c commit 89b22c34757178f64d5fbaffa31e6302f841c060 Author: Kaushal M <kaushal@redhat.com> Date: Thu Jul 10 12:30:00 2014 +0530 Hostnames in peer status commit 63ebf9485cf50d736cf640238a1ab241671fcaf1 Merge: c8c8fdd f5f9721 Author: Kaushal M <kaushal@redhat.com> Date: Thu Jul 10 12:06:33 2014 +0530 Merge remote-tracking branch 'origin/master' into better-peer-identification commit c8c8fdd2104b5b6b8a1af739b1dd952b74e6dd66 Author: Kaushal M <kaushal@redhat.com> Date: Wed Jul 9 18:35:27 2014 +0530 Hostnames in xml output commit 732a92a0167ad7b1d70edbc35ebd8307c2766ae1 Author: Kaushal M <kaushal@redhat.com> Date: Wed Jul 9 15:12:10 2014 +0530 Add hostnames to cli rsp dict during list-friends commit fcf43e3e317508f0c225024738a988a4af8e9205 Merge: c0e2624 72d96e2 Author: Kaushal M <kaushal@redhat.com> Date: Wed Jul 9 12:53:03 2014 +0530 Merge branch 'master' into better-peer-identification commit c0e262416728a3c536a8347a216e471eb2251535 Author: Kaushal M <kaushal@redhat.com> Date: Mon Jul 7 16:11:19 2014 +0530 Use list_for_each_entry_safe when cleaning peer hostnames commit 6132e60224eb592f3657e535a12a3e72c772da42 Author: Kaushal M <kaushal@redhat.com> Date: Mon Jul 7 15:52:19 2014 +0530 Fix crash in gd_add_friend_to_dict commit 88ffa9a508fd5aac0b2a76e6e76487ce0cab786a Author: Kaushal M <kaushal@redhat.com> Date: Mon Jul 7 13:19:44 2014 +0530 gd_peerinfo_destroy -> glusterd_peerinfo_destroy commit 4b36930a715b1e13cd1a77d136ef1cf78a06d574 Author: Kaushal M <kaushal@redhat.com> Date: Mon Jul 7 12:50:12 2014 +0530 More refactoring commit ee559b081d608c6501c10ae22166f26eeb65690e Author: Kaushal M <kaushal@redhat.com> Date: Mon Jul 7 12:14:40 2014 +0530 Major refactoring of code based on review comments at https://review.gluster.org/#/c/8238/1/xlators/mgmt/glusterd/src/glusterd-peer-utils.h commit e96dbc7bbb05fad2a9c424de41a394b8023fe48d Merge: 2613d1d 83c09b7 Author: Kaushal M <kaushal@redhat.com> Date: Mon Jul 7 09:47:05 2014 +0530 Merge remote-tracking branch 'origin/master' into better-peer-identification commit 2613d1daebff0c56812de821c06ed4c16bb9d447 Merge: b242cf6 9a50211 Author: Kaushal M <kaushal@redhat.com> Date: Fri Jul 4 15:28:57 2014 +0530 Merge remote-tracking branch 'origin/master' into better-peer-identification commit b242cf66d95dd3dd5e3975aa430baa6bd74b8a29 Author: Kaushal M <kaushal@redhat.com> Date: Fri Jul 4 15:08:18 2014 +0530 Fix a silly mistake, if (ctx->req) => if (ctx->req == NULL) commit c835ed26433830ceed57289143f596cf60421558 Author: Kaushal M <kaushal@redhat.com> Date: Fri Jul 4 14:58:23 2014 +0530 Fix reverse probe. commit 9ede17f9329b854b02e8ad159f173244789fd08c Author: Kaushal M <kaushal@redhat.com> Date: Fri Jul 4 13:31:32 2014 +0530 Fix friend import for existing peers commit 891bf74c7350064dfb008d1b7294bcec28d680fd Author: Kaushal M <kaushal@redhat.com> Date: Fri Jul 4 13:08:36 2014 +0530 Set first hostname in peerinfo->hostnames to peerinfo->hostname commit 9421d6a217381a7427a7d84f369280883ca4297a Author: Kaushal M <kaushal@redhat.com> Date: Fri Jul 4 12:21:40 2014 +0530 Fix gf_asprintf return val check in glusterd_store_peer_write commit defac978c1d94011ce8195e311839b9ffce057e7 Author: Kaushal M <kaushal@redhat.com> Date: Fri Jul 4 11:16:13 2014 +0530 Fix store_retrieve_peers to correctly cleanup. commit 00a799f5de1121b0cb7421da8285f9407063e1bd Author: Kaushal M <kaushal@redhat.com> Date: Fri Jul 4 10:52:11 2014 +0530 Update address list in glusterd_probe_cbk only when needed. commit 7a628e8a9c562d85709c69cfa13fb1774c521b75 Merge: d191985 dc46d5e Author: Kaushal M <kaushal@redhat.com> Date: Fri Jul 4 09:24:12 2014 +0530 Merge remote-tracking branch 'origin/master' into better-peer-identification commit d1919858e6639d2b54d716a61f662d9752ec5ff1 Author: Kaushal M <kaushal@redhat.com> Date: Tue Jul 1 18:59:49 2014 +0530 gf_compare_addrinfo -> gf_compare_sockaddr commit 31d8ef730d408f8d9ba8f504fa648f7dcd59da87 Merge: 93bbede 86ee233 Author: Kaushal M <kaushal@redhat.com> Date: Tue Jul 1 18:16:13 2014 +0530 Merge remote-tracking branch 'origin/master' into better-peer-identification commit 93bbedeac5181e29f59b2acd08f638146812ec41 Author: Kaushal M <kaushal@redhat.com> Date: Tue Jul 1 18:15:16 2014 +0530 Improve glusterd_friend_find_by_hostname glusterd_friend_find_by_hostname will now do an initial quick search for the peerinfo performing string comparisions on the given host string. It follows it with a more thorough match, by resolving the addresses and comparing addrinfos instead of strings. commit 2542cdbc45aa9cfcaf1f174686158d5565cdd07b Author: Kaushal M <kaushal@redhat.com> Date: Tue Jul 1 17:21:10 2014 +0530 New utility gf_compare_addrinfo commit 338676e8389a44bd91136eebd110197429c2566c Author: Kaushal M <kaushal@redhat.com> Date: Tue Jul 1 14:55:56 2014 +0530 Use gd_peer_has_address instead of strcmp commit 28d45be51f594328741c44455bd80ac9d64ca501 Merge: 728266e 991dd5e Author: Kaushal M <kaushal@redhat.com> Date: Tue Jul 1 14:54:40 2014 +0530 Merge branch 'master' into better-peer-identification commit 728266eb16d5f5a4bf36266044425ae164337f99 Merge: 7d9b87b 2417de9 Author: Kaushal M <kaushal@redhat.com> Date: Tue Jul 1 09:55:13 2014 +0530 Merge remote-tracking branch 'origin/master' into better-peer-identification commit 7d9b87b84955ec17daeaf88a3e7462914039430f Merge: b890625 e02275c Author: Kaushal M <kshlmster@gmail.com> Date: Tue Jul 1 08:41:40 2014 +0530 Merge pull request #4 from vpshastry/better-peer-identification Better peer identification commit e02275c52fb83c72ad082c098fd3e432c2b9c526 Merge: 75ee90d b890625 Author: Varun Shastry <vshastry@redhat.com> Date: Mon Jun 30 16:44:29 2014 +0530 Merge branch 'better-peer-identification' of https://github.com/kshlm/glusterfs into better-peer-identification-kaushal-github commit 75ee90d2f272e49b94d24c9ca4571e89a83055ff Author: Varun Shastry <vshastry@redhat.com> Date: Mon Jun 30 15:36:10 2014 +0530 glusterd: add to the list if the probed uuid pre-exists Signed-off-by: Varun Shastry <vshastry@redhat.com> commit b890625d8164c660695daef3285c67979eef723e Merge: 04c5d60 187a7a9 Author: Kaushal M <kaushal@redhat.com> Date: Mon Jun 30 11:44:13 2014 +0530 Merge remote-tracking branch 'origin/master' into better-peer-identification commit 04c5d60cb938c8d94b214689580b40abb1b0ffcd Merge: 3a5bfa1 e01edb6 Author: Kaushal M <kshlmster@gmail.com> Date: Sat Jun 28 19:23:33 2014 +0530 Merge pull request #3 from vpshastry/better-peer-identification glusterd: search through the list of hostnames in the peerinfo commit 0c64f3346a977f9165ac55a84a1e03c40a7573a7 Merge: e01edb6 3a5bfa1 Author: Varun Shastry <vshastry@redhat.com> Date: Sat Jun 28 10:43:29 2014 +0530 Merge branch 'better-peer-identification' of https://github.com/kshlm/glusterfs into better-peer-identification-kaushal-github commit e01edb63153a1008db70b8fa76ae5b535e099326 Author: Varun Shastry <vshastry@redhat.com> Date: Fri Jun 27 12:29:36 2014 +0530 glusterd: search through the list of hostnames in the peerinfo Signed-off-by: Varun Shastry <vshastry@redhat.com> commit 3a5bfa15855e660db2bfde644727371dd2d618cc Merge: cda6d31 371ea35 Author: Kaushal M <kshlmster@gmail.com> Date: Fri Jun 27 11:31:17 2014 +0530 Merge pull request #1 from vpshastry/better-peer-identification glusterd: Add hostname to list instead of replaceing upon update commit 371ea354f198b4182382d5403c5960c0b2add6b6 Author: Varun Shastry <vshastry@redhat.com> Date: Fri Jun 27 11:24:54 2014 +0530 glusterd: Add hostname to list instead of replaceing upon update Signed-off-by: Varun Shastry <vshastry@redhat.com> commit cda6d3152886623ecbf46baf0048ebe0119b30b6 Author: Kaushal M <kaushal@redhat.com> Date: Thu Jun 26 19:52:52 2014 +0530 Import address lists commit 6649b54aa0440130c08e827e0a1d1bbfb840eca9 Author: Kaushal M <kaushal@redhat.com> Date: Thu Jun 26 19:15:37 2014 +0530 Implement export address list commit 55990034eead92bc9b936240029e460a4bf152d5 Author: Kaushal M <kaushal@redhat.com> Date: Thu Jun 26 18:11:59 2014 +0530 Use first address in list to when setting up the peer RPC. commit a35fde8d19b9988eb04c652fb3a5e4f84d90ad00 Author: Kaushal M <kaushal@redhat.com> Date: Thu Jun 26 18:03:04 2014 +0530 Properly free addresses on glusterd_peer_destroy commit 1988081db09ac9205f3dc7268cef8be267f3ce8b Author: Kaushal M <kaushal@redhat.com> Date: Thu Jun 26 17:52:35 2014 +0530 Restore peerinfo with address list implemented. commit 66f524d5749a12f4910dd6b06c9d91f37e1d831e Author: Kaushal M <kaushal@redhat.com> Date: Mon Jun 23 13:02:23 2014 +0530 Move out all peer related utilities from glusterd-utils to glusterd-peer-utils commit 14a2a326a4dff11b55490dca2a14f39320931340 Author: Kaushal M <kaushal@redhat.com> Date: Tue May 27 12:16:41 2014 +0530 Compilation fix commit c59cd351d0a102d0d5f3ea9001fd33c4edcb262f Author: Kaushal M <kaushal@redhat.com> Date: Mon May 5 12:51:11 2014 +0530 Add store support for hostname list commit b70325f0beb884ad12645ef40185f0bf6cedd741 Author: Kaushal M <kaushal@redhat.com> Date: Fri May 2 15:58:07 2014 +0530 Add a hostnames list to glusterd_peerinfo_t glusterd_peerinfo_new will now init this list and add the given hostname as the lists first member. Signed-off-by: Kaushal M <kaushal@redhat.com> Signed-off-by: Varun Shastry <vshastry@redhat.com> Change-Id: Ief3c5d6d6f16571ee2fab0a45e638b9d6506a06e BUG: 1119547 Reviewed-on: http://review.gluster.org/8238 Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* glusterd/snapshot: fixing glusterd quorum during snap operationJoseph Fernandes2014-07-041-1/+1
| | | | | | | | | | | | | | | | During a snapshot operation, glusterd quorum will be checked only on transaction peers, which are selected in the begin of the operation, and not on the entire peer list which is susceptible for change for any peer attach operation. Change-Id: I089e3262cb45bc1ea4a3cef48408a9039d3fbdb9 BUG: 1114403 Signed-off-by: Joseph Fernandes <josferna@redhat.com> Reviewed-on: http://review.gluster.org/8200 Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-by: Kaushal M <kaushal@redhat.com> Tested-by: Kaushal M <kaushal@redhat.com>
* mgmt/glusterd: display snapd status as part of volume statusRaghavendra Bhat2014-06-301-1/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | * Made changes to save the port used by snapd in the info file for the volume i.e. <glusterd-working-directory>/vols/<volname>/info This is how the gluster volume status of a volume would look like for which the uss feature is enabled. [root@tatooine ~]# gluster volume status vol Status of volume: vol Gluster process Port Online Pid ------------------------------------------------------------------------------ Brick tatooine:/export1/vol 49155 Y 5041 Snapshot Daemon on localhost 49156 Y 5080 NFS Server on localhost 2049 Y 5087 Task Status of Volume vol ------------------------------------------------------------------------------ There are no active volume tasks Change-Id: I8f3e5d7d764a728497c2a5279a07486317bd7c6d BUG: 1111041 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/8114 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* glusterd: Better op-version values and rangesKaushal M2014-06-091-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | Till now, the op-version was an incrementing integer that was incremented by 1 for every Y release (when using the X.Y.Z release numbering). This is not flexible enough to handle backports of features into Z releases. Going forward, from the upcoming 3.6.0 release, the op-versions will be multi-digit integer values composed of the version numbers, instead of a simple incrementing integer. An X.Y.Z release will have XYZ as its op-version. Y and Z will always be 2 digits wide and will be padded with 0 if required. This way of bumping op-versions allows for gaps in between the subsequent Y releases. These gaps will allow backporting features from new Y releases into old Z releases. Change-Id: I463f82902d997ec07e76dae58ac935f33e6393c2 BUG: 1104997 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/7963 Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* glusterd: Changes to provide interface for USSVarun Shastry2014-06-031-0/+10
| | | | | | | | | | | | | | | The changes which consists of the translators for the USS (User Servicable Snapshots) is submitted as a separate patch. Current patch provides the CLI access to the feature. Change-Id: I6b98a42fcfa82f0870d8048fe0bb53141565e9c6 BUG: 1094815 Signed-off-by: Varun Shastry <vshastry@redhat.com> Reviewed-on: http://review.gluster.org/7705 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* glusterd: Fetching the txn_id before performing glusterd_op_bricks_select in ↵Avra Sengupta2014-06-021-1/+1
| | | | | | | | | | | | | | | | | | | | glusterd_brick_op() In glusterd_brick_op(), the txn_id mut be fetched before failing the transaction for any other reason. Moving the fetching of txn_id to the beginning of the function. Also initializing txn_id to priv->global_txn_id where it wasn't initialized. Change-Id: I44d7daa444f00a626f24670c92324725f6c5fb35 BUG: 1102656 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/7926 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* glusterd: Allow setting volume options by default based on op-versionKaushal M2014-05-141-2/+18
| | | | | | | | | | | | | | | | | | A new function glusterd_enable_default_options is introduced, which will set some volume options on a volume based on op-version. This function is called near the end of the volume create and will allow some options to be enabled based on op-version on newly created volumes. This will also be called during volume reset, to reset the options to their default values if they had changed. Change-Id: I91057d9e42409b17a884728b43ae3721328d4831 BUG: 1096616 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/7734 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* glusterd: Use a calloc-ed copy of txn_id for glusterd_do_replace_brickAvra Sengupta2014-05-081-3/+8
| | | | | | | | | | | | | | | As glusterd_do_replace_brick() is spawned through gf_timer_call_after(), by the time it's called the event is freed, and the txn_id is lost. Hence using a calloc-ed copy, which will be freed as a part of rb_ctx dict. Change-Id: I3e309fe1a7ba96ad1d1ce01f4d2aa18178f59244 BUG: 1095097 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/7686 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* glusterd: Port server quorum messages to the gf_msg APIKaushal M2014-05-061-1/+4
| | | | | | | | | | Change-Id: I84716cc07f3cbd8c1b2825a5676d6693fed6fade BUG: 1075611 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/7578 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* glusterd: Allow bumping up the cluster op-versionKaushal M2014-05-061-0/+73
| | | | | | | | | | | | | | | | | | | | | | | | | This patch allows a user to bump up the cluster op-version by doing # gluster volume set all cluster.op-version <OP-VERSION> The op-version will be bumped only if - all the peers in the cluster support it, and - the new op-version is greater than the current cluster op-version This set operation will not do any other change other than changing and saving the cluster op-version in the glusterd.info file. It will NOT, - change any existing volume - add the option to the global options list - fix the cluster op-version to the given version, it can be bumped up by other volume set commands. Change-Id: I084b4fcc45e79dc2ca7b7680d7bb371bb175af39 BUG: 1092592 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/7603 Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* glusterd: Fetch brick mount_dirs during brick create.Avra Sengupta2014-05-061-5/+21
| | | | | | | | | | | | | | | | | Fetch the mount directory path for a brick, during volume create, add-brick, and replace-brick. When a snap-create is missed, use this mount directory information to create the brick path for the missed snap brick. Change-Id: Iad3eec96a32cf340f26bdf3f28e2f529e4b77e31 BUG: 1061685 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/7550 Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* glusterd/snapshot : Barrier code integration with snapshot codebase.Sachin Pandit2014-05-011-3/+2
| | | | | | | | | | | | | | | | | As we have new barrier translator in place, we are making use of that during snapshot phase. During snapshot create (pre-commit), we enable the barrier feature and after the commit we disable it. Change-Id: I94212b1c06b0d9b12255ee98313e2d8549b34b17 BUG: 1061685 Signed-off-by: Sachin Pandit <spandit@redhat.com> Reviewed-on: http://review.gluster.org/7561 Reviewed-by: Kaushal M <kaushal@redhat.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cli: Add a cli command to enable/disable barrierKaushal M2014-04-291-0/+9
| | | | | | | | | | | | | | | This patch adds a new 'gluster volume barrier <VOLNAME> {enable|disable}' cli command. This helps in testing the brick op code path when testing the barrier xlator. This patch can be reverted later if not required for end users. Change-Id: Icd86a2d13e7f276dda1ecbb2593d60638ece7dcd BUG: 1060002 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/6958 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: Add a barrier brick-opKaushal M2014-04-291-0/+66
| | | | | | | | | | | | | | | | This patch introduces a new 'barrier' brick-op which will be used to activate/deactivate the barriering on the bricks. This includes barriering in the barrier xlator and in the changelog xlator. All the required code has been including a bricks select function, a payload builder and a brick-op handler. Change-Id: I91d9d77f691c2e89823f7dc4e84900ec40dc4dd2 BUG: 1060002 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/6943 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd/snapshot: Compare and update snapshots during peer handshakeAvra Sengupta2014-04-281-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | During a peer-handshake, after the volumes have synced, and the list of missed snapshots have synced, the node will perform the pending deletes and restores on this list. At this point, the current snapshot list in the node will be updated, and hence in case of conflicts arising during snapshot handshake, the peer hosting the bricks will be given precedence Likewise, if there will be a conflict, and both peers will be in the same state, i.e either both would be hosting bricks or both would not be hosting bricks, then a decision can't be taken and a peer-reject will happen. glusterd_compare_and_update_snap() implements the following algorithm to perform the above task: Step 1: Start. Step 2: Check if the peer is missing a delete on the said snap. If yes, goto step 6. Step 3: Check if there is a conflict between the peer's data and the local snap. If no, goto step 5. Step 4: As there is a conflict, check if both the peer and the local nodes are hosting bricks. Based on the results perform the following: Peer Hosts Bricks Local Node Hosts Bricks Action Yes Yes Goto Step 7 No No Goto Step 7 Yes No Goto Step 8 No Yes Goto Step 6 Step 5: Check if the local node is missing the peer's data. If yes, goto step 9. Step 6: It's a no-op. Goto step 10 Step 7: Peer Reject. Goto step 10 Step 8: Delete local node's data. Step 9: Accept Peer Data. Step 10: Stop Change-Id: I79be0f0f5f2a4f5c72277a4e77c2be732af432e1 BUG: 1061685 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/7525 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* build: MacOSX Porting fixesHarshavardhana2014-04-241-3/+4
| | | | | | | | | | | | | | | | | | | | | git@forge.gluster.org:~schafdog/glusterfs-core/osx-glusterfs Working functionality on MacOSX - GlusterD (management daemon) - GlusterCLI (management cli) - GlusterFS FUSE (using OSXFUSE) - GlusterNFS (without NLM - issues with rpc.statd) Change-Id: I20193d3f8904388e47344e523b3787dbeab044ac BUG: 1089172 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Signed-off-by: Dennis Schafroth <dennis@schafroth.com> Tested-by: Harshavardhana <harsha@harshavardhana.net> Tested-by: Dennis Schafroth <dennis@schafroth.com> Reviewed-on: http://review.gluster.org/7503 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* gluster: GlusterFS Volume Snapshot FeatureAvra Sengupta2014-04-111-22/+106
| | | | | | | | | | | | | | | | | | | | | | | | | This is the initial patch for the Snapshot feature. Current patch includes following features: * Snapshot create * Snapshot delete * Snapshot restore * Snapshot list * Snapshot info * Snapshot status * Snapshot config Change-Id: I2f46920c0d61c515f6a60e0f8b46fff886d9f6a9 BUG: 1061685 Signed-off-by: shishir gowda <sgowda@redhat.com> Signed-off-by: Sachin Pandit <spandit@redhat.com> Signed-off-by: Vijaikumar M <vmallika@redhat.com> Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Signed-off-by: Rajesh Joseph <rjoseph@redhat.com> Signed-off-by: Joseph Fernandes <josferna@redhat.com> Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/7128 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: Free dup_value when error path is taken.Ira Cooper2014-02-141-4/+8
| | | | | | | | | | | | | | | | | When the error path is taken here, the data that was allocated for dup_value is never freed. This patch frees it. Thanks to Kaleb Keithley <kkeithle@redhat.com> for his suggestions on how to fix this. Change-Id: Iad88b9ab035602d15961b46c4954d54d54e0d65e CID: 1124705 BUG: 789278 Signed-off-by: Ira Cooper <ira@samba.org> Reviewed-on: http://review.gluster.org/6780 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* glusterd/Vol-Locks : Moving globals into glusterd priv and code refactoringAvra Sengupta2014-02-141-26/+84
| | | | | | | | | | | | | | | | | | | | | | Moved globals(vol_lock and txn_opinfo dicts and global_txn_id) into glusterd priv Moved glusterd_op_send_cli_response() out of gd_unlock_op_phase as gd_unlock_op_phase and glusterd_clear_txn_opinfo should only be called if the txn id has been successfully generated. The cli resp should be sent irrespective of that. Changed log levels from ERROR to WARNING for some volume lock logs where the logs are expected and is not an error Added logs for better transparency of transaction ids. Change-Id: Ifac9b23aa9f1648c9ae252cfd3ac50bb2ed46728 BUG: 1011470 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/6976 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: Volume locks and transaction specific opinfosAvra Sengupta2014-02-101-126/+507
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With this patch we are replacing the existing cluster-wide lock taken on glusterds across the cluster, with volume locks which are also taken on glusterds across the cluster, but are volume specific. So with the volume locks we are able to perform more than one gluster operation at the same time, as long as the operations are being performed on different volumes. We maintain a global list of volume-locks (using a dict for a list) where the key is the volume name, and which saves the uuid of the originator glusterd. These locks are held and released per volume transaction. In order to acheive multiple gluster operations occuring at the same time, we also separate opinfos in the op-state-machine, as a part of this patch. To do so, we generate a unique transaction-id (uuid) per gluster transaction. An opinfo is then associated with this transaction id, which is used throughout the transaction. We maintain a run-time global list(using a dict) of transaction-ids, and their respective opinfos to achieve this. Upstream Feature Page: http://www.gluster.org/community/documentation/index.php/Features/glusterd-volume-locks Change-Id: Iaad505a854bac8de8f83beec0357eb6cde3f7ea8 BUG: 1011470 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/5994 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: Fix the NULL dereference errors reported by coverity.Poornima2014-02-071-0/+4
| | | | | | | | | | Change-Id: I51c120dfe2db44a2b74f35e5cafb4f364ed6e66e BUG: 789278 Signed-off-by: Poornima <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/6901 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: Free leaked error message.Ira Cooper2014-01-241-3/+5
| | | | | | | | | | | | | | The way the previous code was written you couldn't tell if the string was from the data area, or allocated, so we switched how the error message is printed, and now free unconditionally. Change-Id: Ia83cf9893acdfb5d537a61cc0bbf4aa7689e483d CID: 1124704 BUG: 789278 Signed-off-by: Ira Cooper <ira@samba.org> Reviewed-on: http://review.gluster.org/6779 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cli: Add options to the CLI that let the user control the reset ofDawit Alemu2014-01-241-8/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | stats "volume profile info" automatically clears incremental stats. There isn't a command to: - fetch stats without clearing incremental stats and - clear cumulative and incremental stats This change introduces two arguments (i.e. peek and clear). 'clear' will wipe both incremental and cumulative stats. 'peek' fetches stats without wiping incremental stats. 'volume profile info peek' - fetches incremental and cumulative stats without wiping incremental stats 'volume profile info incremental peek' - fetches incremental stats without wiping incremental stats 'volume profile info clear' - clears both incremental and cumultiave stats Change-Id: I91834515ad672eca5f882809941147d7d997c4c9 BUG: 1047416 Signed-off-by: Dawit Alemu <dalemu@redhat.com> Reviewed-on: http://review.gluster.org/6620 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd : enable/disable quota using volume set cmd deprecated.Anuradha Talur2013-12-191-0/+38
| | | | | | | | | | | | | | | | | Using the command 'gluster volume set <volname> quota {on|off}' doesn't really enable/disable quota. So, a message to the user is provided. Message asks the user to use 'gluster volume quota <volname> {enable|disable}' instead. Improvement of the previous method to solve the issue. Change-Id: Ibeda35bb49ec7b541d53e592b48fd132380fce76 BUG: 1024626 Signed-off-by: Anuradha Talur <atalur@redhat.com> Reviewed-on: http://review.gluster.org/6512 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: Aggregate tasks status in 'volume status [tasks]'Kaushal M2013-12-041-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously, glusterd used to just send back the local status of a task in a 'volume status [tasks]' command. As the rebalance operation is distributed and asynchronus, this meant that different peers could give different status values for a rebalance or remove-brick task. With this patch, all the peers will send back the tasks status as a part of the 'volume status' commit op, and the origin peer will aggregate these to arrive at a final status for the task. The aggregation is only done for rebalance or remove-brick tasks. The replace-brick task will have the same status on all the peers (see comment in glusterd_volume_status_aggregate_tasks_status() for more information) and need not be aggregated. The rebalance process has 5 states, NOT_STARTED - rebalance process has not been started on this node STARTED - rebalance process has been started and is still running STOPPED - rebalance process was stopped by a 'rebalance/remove-brick stop' command COMPLETED - rebalance process completed successfully FAILED - rebalance process failed to complete successfully The aggregation is done using the following precedence, STARTED > FAILED > STOPPED > COMPLETED > NOT_STARTED The new changes make the 'volume status tasks' command a distributed command as we need to get the task status from all peers. The following tests were performed, - Start a remove-brick task and do a status command on a peer which doesn't have the brick being removed. The remove-brick status was given correctly as 'in progress' and 'completed', instead of 'not started' - Start a rebalance task, run the status command. The status moved to 'completed' only after rebalance completed on all nodes. Also, change the CLI xml output code for rebalance status to use the same algorithm for status aggregation. Change-Id: Ifd4aff705aa51609a612d5a9194acc73e10a82c0 BUG: 1027094 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/6230 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com>
* cli: Add an option to fetch just incremental or cumulative I/0Dawit Alemu2013-12-031-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | information 'volume profile info' fetches both cumulative and incremental I/O statistics. There isn't a way to fetch just cumulative or incremental statistics. This change introduces two optional arguments, namely "incremental" and "cumulative", that can be tacked on to 'volume profile info'. In other words, the new command format is volume profile <VOLNAME> {start | info [incremental | cumulative] | stop} [nfs] 'volume profile info incremental' - fetches incremental stats 'volume profile info cumulative' - fetches cumulative stats 'volume profile info' - fetches incremental and cumulative stats Change-Id: I5ddb45d990542ea611d23d251efebfec46f472d0 BUG: 1030580 Signed-off-by: Dawit Alemu <dalemu@redhat.com> Reviewed-on: http://review.gluster.org/6264 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com>
* cli: use proper copy to set node-nameBala.FA2013-11-261-2/+19
| | | | | | | | | | | | Previously node-name is set to point to node-uuid which could cause memory leak. This is fixed by having memory copy of node-uuid. BUG: 1012296 Change-Id: I3b638ec289d5b167c6e752ef1ba41f41efacb9da Signed-off-by: Bala.FA <barumuga@redhat.com> Reviewed-on: http://review.gluster.org/6330 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cli/glusterd: Changes to quota command Quota featureRaghavendra G2013-11-261-17/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | re-work. Following are the cli commands that are new/re-worked: ====================================================== volume quota <VOLNAME> {enable|disable|list [<path> ...]|remove <path>| default-soft-limit <percent>} | volume quota <VOLNAME> {limit-usage <path> <size> [<percent>]} | volume quota <VOLNAME> {alert-time|soft-timeout|hard-timeout} {<time>} volume status [all | <VOLNAME> [nfs|shd|<BRICK>|quotad]] [detail|clients|mem|inode|fd|callpool] volume statedump <VOLNAME> [nfs|quotad] [all|mem|iobuf|callpool|priv|fd|inode|history] glusterd changes: ================= * Quota limits are now set as extended attributes by glusterd from the aux mount created by the cli. * The gfids of the directories on which quota limits are set for a given volume are stored in /var/lib/glusterd/vols/<volname>/quota.conf file in binary format, and whose cksum and version is stored in /var/lib/glusterd/vols/<volname>/quota.cksum. Original-author: Krutika Dhananjay <kdhananj@redhat.com> Original-author: Krishnan Parthasarathi <kparthas@redhat.com> BUG: 969461 Change-Id: If32bba36c67f9c2a30417af9c6389045b2b7c13b Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/6003 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cli: fix possible memory leaksBala.FA2013-11-211-0/+3
| | | | | | | | | BUG: 955548 Change-Id: Iae410712e7e6d7a76cd537c77f1919e3b4cdf6bb Signed-off-by: Bala.FA <barumuga@redhat.com> Reviewed-on: http://review.gluster.org/6328 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* cli: add peerid to volume status xml outputBala.FA2013-11-141-0/+23
| | | | | | | | | | | | This patch adds <peerid> tag to bricks and nfs/shd like services to volume status xml output. BUG: 955548 Change-Id: I9aaa9266e4d56f632235eaeef565e92d757c0694 Signed-off-by: Bala.FA <barumuga@redhat.com> Reviewed-on: http://review.gluster.org/6162 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* bd_map: Remove bd_map xlatorM. Mohan Kumar2013-11-131-89/+1
| | | | | | | | | | | Remove bd_map xlator and CLI related changes. Change-Id: If7086205df1907127c1a1fa4ba603f1c48421d09 BUG: 1028672 Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Reviewed-on: http://review.gluster.org/5747 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* glusterd : Improved quota volume reset commandAnuradha2013-10-281-10/+21
| | | | | | | | | | | | | | | | | | | | | | | Quota volume reset command without "force" option fixed, doesn't fail anymore. It resets unprotected fields and not the protected ones. Also, an appropriate message is provided to the user for the following cases : 1. only unprotected fields are reset, "force" option should be used to reset protected fields. 2. Both protected and unprotected fields are reset. 3. No field was reset, "force" option required. Test case for the same also added. Change-Id: I24e8f1be87b79ccd81bf6f933e00608b861c7a16 BUG: 1022905 Signed-off-by: Anuradha <atalur@redhat.com> Reviewed-on: http://review.gluster.org/6135 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* libglusterfs: Add monotonic clocking counter for timer threadHarshavardhana2013-10-151-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | gettimeofday() returns the current wall clock time and timezone. Using these functions in order to measure the passage of time (how long an operation took) therefore seems like a no-brainer. This time suffer's from some limitations: a. They have a low resolution: “High-performance” timing by definition, requires clock resolutions into the microseconds or better. b. They can jump forwards and backwards in time: Computer clocks all tick at slightly different rates, which causes the time to drift. Most systems have NTP enabled which periodically adjusts the system clock to keep them in sync with “actual” time. The adjustment can cause the clock to suddenly jump forward (artificially inflating your timing numbers) or jump backwards (causing your timing calculations to go negative or hugely positive). In such cases timer thread could go into an infinite loop. From 'man gettimeofday': ---------- .. .. The time returned by gettimeofday() is affected by discontinuous jumps in the system time (e.g., if the system administrator manually changes the system time). If you need a monotonically increasing clock, see clock_gettime(2). .. .. ---------- Rationale: For calculating interval timing for Timer thread, all that’s needed should be clock as a simple counter that increments at a stable rate. This is necessary to avoid the jumps which are caused by using "wall time", this counter must be monotonic that can never “tick” backwards, ever. Change-Id: I701d31e71a85a73d21a6c5cd15583e7a5a645eeb BUG: 1017993 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/6070 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cluster/afr: [Feature] Command implementation to get heal-countVenkatesh Somyajulu2013-10-141-17/+155
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently to know the number of files to be healed, either user has to go to backend and check the number of entries present in indices/xattrop directory. But if a volume consists of large number of bricks, going to each backend and counting the number of entries is a time-taking task. Otherwise user can give gluster volume heal vol-name info command but with this approach if no. of entries are very hugh in the indices/ xattrop directory, it will comsume time. So as a feature, new command is implemented. Command 1: gluster volume heal vn statistics heal-count This command will get the number of entries present in every brick of a volume. The output displays only entries count. Command 2: gluster volume heal vn statistics heal-count replica 192.168.122.1:/home/user/brickname Here if we are concerned with just one replica. So providing any one of the brick of a replica will get the number of entries to be healed for that replica only. Example: Replicate volume with replica count 2. Backend status: -------------- [root@dhcp-0-17 xattrop]# ls -lia | wc -l 1918 NOTE: Out of 1918, 2 entries are <xattrop-gfid> dummy entries so actual no. of entries to be healed are 1916. [root@dhcp-0-17 xattrop]# pwd /home/user/2ty/.glusterfs/indices/xattrop Command output: -------------- Gathering count of entries to be healed on volume volume3 has been successful Brick 192.168.122.1:/home/user/22iu Status: Brick is Not connected Entries count is not available Brick 192.168.122.1:/home/user/2ty Number of entries: 1916 Change-Id: I72452f3de50502dc898076ec74d434d9e77fd290 BUG: 1015990 Signed-off-by: Venkatesh Somyajulu <vsomyaju@redhat.com> Reviewed-on: http://review.gluster.org/6044 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cluster/afr : Implementation of command "gluster volume heal vn statistics"Venkatesh Somyajulu2013-10-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | "gluster volume heal volumename statistics" command gives the summary of the afr crawl done based on the entries present in the xattrop directory. Whenever afr crawls are attempted, the beginning time of crawl, end time of crawl, no of files healed, heal-failed count and number of files in split brain are shown along with the type of the crawl. If crawl is already in progress then it will give the number of files healed, heal failed count and number of files in split-brain from the beginning of the crawl and instead of telling the end time of the crawl, "CRAWL IN PROGRESS" message will be shown. Output format: command: "gluster volume heal volume-name statistics" Output: Gathering afr crawl statistics crawl statistics on volume volume-name has been successful ------------------------------------------------ Crawl statistics for brick no 0 Hostname of brick 192.168.122.248 Starting time of crawl: Wed Jul 10 15:52:38 2013 Ending time of crawl: Wed Jul 10 15:52:38 2013 Type of crawl: INDEX No. of entries healed: 0 No. of entries in split-brain: 0 No. of heal failed entries: 0 Starting time of crawl: Wed Jul 10 15:52:38 2013 Ending time of crawl: Wed Jul 10 15:52:38 2013 Type of crawl: INDEX No. of entries healed: 0 No. of entries in split-brain: 0 No. of heal failed entries: 0 ------------------------------------------------ Crawl statistics for brick no 1 Hostname of brick 192.168.122.1 Starting time of crawl: Wed Jul 10 15:52:42 2013 Ending time of crawl: Wed Jul 10 15:52:42 2013 Type of crawl: INDEX No. of entries healed: 0 No. of entries in split-brain: 0 No. of heal failed entries: 0 Starting time of crawl: Wed Jul 10 15:52:42 2013 Ending time of crawl: Wed Jul 10 15:52:42 2013 Type of crawl: INDEX No. of entries healed: 0 No. of entries in split-brain: 0 No. of heal failed entries: 0 -------------------------------------------------- Change-Id: I10bf9d10b005741db9973fb1352e0dd59ed99aa9 BUG: 949400 Signed-off-by: Venkatesh Somyajulu <vsomyaju@redhat.com> Reviewed-on: http://review.gluster.org/4790 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cli,glusterd: Implement 'volume status tasks'Krutika Dhananjay2013-10-081-25/+51
| | | | | | | | | | | | | | | | | | | oVirt's Gluster Integration needs an inexpensive command that can be executed every 10 seconds to monitor async tasks and their parameters, for all volumes. The solution involves adding a 'tasks' sub-command to 'volume status' to fetch only the async task IDs, type and other relevant parameters. Only the originator glusterd participates in this command as all the information needed is available on all the nodes. This is to make the command suitable for being executed every 10 seconds. Change-Id: I1edc607baf29b001a5585079dec681d7c641b3d1 BUG: 1012346 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/6006 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* cli: add node uuid in rebalance and remove brick status xml outputBala.FA2013-10-031-1/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds node uuid in rebalance/remove-brick status xml output. Output XML will look like <?xml version="1.0" encoding="UTF-8" standalone="yes"?> <cliOutput> <opRet>0</opRet> <opErrno>0</opErrno> <opErrstr/> <volRebalance> <op>3</op> <nodeCount>1</nodeCount> <node> <nodeName>localhost</nodeName> ==>> <id>883626f8-4d29-4d02-8c5d-c9f48c5b2445</id> <files>0</files> <size>0</size> <lookups>0</lookups> <failures>0</failures> <status>3</status> <statusStr>completed</statusStr> </node> <aggregate> <files>0</files> <size>0</size> <lookups>0</lookups> <failures>0</failures> <status>3</status> <statusStr>completed</statusStr> </aggregate> </volRebalance> </cliOutput> Change-Id: I5a1d4f9043b33b9e88150647a243ddb16154e843 BUG: 1012296 Signed-off-by: Bala.FA <barumuga@redhat.com> Reviewed-on: http://review.gluster.org/6005 Reviewed-by: Kaushal M <kaushal@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* glusterd: Fix storing volumes on setting global optsKaushal M2013-09-291-3/+6
| | | | | | | | | | | | | | | | | | Glusterd would not store all the volumes when a global options were set. When setting a global option, like 'nfs.*' options, glusterd used to modify the volinfo for all the volumes, but would store only the volinfo for the named volume. This lead to mismatch in the persisted and the in-memory representation of those volumes, which lead to problems like peers being rejected because of volume mismatches. Change-Id: I8bca10585e34b7135cb32af0055dbd462b3fb9b5 BUG: 1012400 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/6007 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cli/glusterd: improve rebalance fix-layout status reportingRavishankar N2013-09-191-0/+96
| | | | | | | | | | | | | | | | | | | Problem: Currenly the CLI rebalance status command output does not indicate the 'type' of rebalance, i.e. whether a full rebalance or only a fix-layout was carried out. Fix: After the rebalance status of all peers is received by the originator glusterd, alter it to reflect the type of rebalance before passing it on to the CLI process. Change-Id: I1940ffda0d36e25e5b33c84a0ea210394cc9e1d3 BUG: 1004744 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/5826 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cli,glusterd: Task parameters in xml outputKaushal M2013-09-131-4/+122
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces task parameters for the asynchronus task shown in volume status. The parameters are only given for xml output. The parameters shown currently are, - source and destination bricks for replace-brick tasks ...... <tasks> <task> <type>Replace brick</type> <id>3d1a1005-9d2e-4ae0-bd62-577bc1d333a3</id> <status>1</status> <params> <srcBrick>archm:/export/test4</srcBrick> <dstBrick>archm:/export/test-replace1</dstBrick> </params> </task> </tasks> ...... - list of bricks being removed for remove-brick tasks ...... <tasks> <task> <type>Remove brick</type> <id>901c20ca-0da2-41de-8669-5f0caca6b846</id> <status>1</status> <params> <brick>archm:/export/test2</brick> <brick>archm:/export/test3</brick> </params> </task> </tasks> ...... The changes for non-xml output will be done in a subsequent patch. Change-Id: I322afe2f83ed8adeddb99f7962c25911204dc204 BUG: 916577 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/5771 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* cli,glusterd: Fix when tasks are shown in 'volume status'Kaushal M2013-08-031-0/+4
| | | | | | | | | | | | | Asynchronous tasks are shown in 'volume status' only for a normal volume status request for either all volumes or a single volume. Change-Id: I9d47101511776a179d213598782ca0bbdf32b8c2 BUG: 888752 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/5308 Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* glusterd: Use volume op-versions during volgenKaushal M2013-08-021-5/+4
| | | | | | | | | | | | | | Instead of using the cluster op-version, volume op-version is used to enable open-behind during volgen. For doing this, the volume op-versions are updated before regenerating the volfiles. Change-Id: I675bb549bf7c7c0279030dca698fb530781addc6 BUG: 990830 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/5385 Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd/cli changes for distributed geo-repAvra Sengupta2013-07-261-4/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commands: gluster system:: execute gsec_create gluster volume geo-rep <master> <slave-url> create [push-pem] [force] gluster volume geo-rep <master> <slave-url> start [force] gluster volume geo-rep <master> <slave-url> stop [force] gluster volume geo-rep <master> <slave-url> delete gluster volume geo-rep <master> <slave-url> config gluster volume geo-rep <master> <slave-url> status The geo-replication is distributed. The session will be created, and gsyncd will be spawned on all relevant nodes, instead of only one node. geo-rep: Collecting status detail related data Added persistent store for saving information about TotalFilesSynced, TotalSyncTime, TotalBytesSynced Changes in the status information in socket: Existing(Ex): FilesSynced=2;BytesSynced=2507;Uptime=00:26:01; New(Ex): FilesSynced=2;BytesSynced=2507;Uptime=00:26:01;SyncTime=0.69978; TotalSyncTime=2.890044;TotalFilesSynced=6;TotalBytesSynced=143640; Persistent details stored in /var/lib/glusterd/geo-replication/${mastervol}/${eSlave}-detail.status Change-Id: I1db7fc13ffca2e415c05200b0109b1254067f111 BUG: 847839 Original Author: Avra Sengupta <asengupt@redhat.com> Original Author: Venky Shankar <vshankar@redhat.com> Original Author: Aravinda VK <avishwan@redhat.com> Original Author: Amar Tumballi <amarts@redhat.com> Original Author: Csaba Henk <csaba@redhat.com> Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/5132 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* glusterd/common-utils: move hostname helper functions to common-utilsKrishnan Parthasarathi2013-07-041-2/+2
| | | | | | | | | Change-Id: If47e209cb61ea0eb74ee2d6ef9e9342b2d6ee13a BUG: 980838 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/5261 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd-volgen: Enable open-behind based on op-versionKaushal M2013-05-281-10/+13
| | | | | | | | | | | | | | | This patch enables the open-behind by default only when the op-version allows it. Also the volume op-version calculations take account of this enablement. Change-Id: Idf7a3c274ec4828aafc815cdd1df829ecb853354 BUG: 954256 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/4866 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: Introduce volume op-versionsKaushal M2013-04-261-0/+5
| | | | | | | | | | | | | | | | | | | | | | | Each volume is now associated with two op-versions, * op_version - the op-version of the highest op-versioned feature enabled * client_op_version - the op-version of the highest op-versioned feature enabled which affects the clients only. These two op-versions are generated dynamically and kept updated during runtime. Glusterd now uses the respective volumes' client-op-version during getspec requests. To achieve the above a new field in the vme table is introduced, client_option, this boolean field tells if the option is a client side option. Change-Id: I12c83b1dd29ab506026efd50d448cebbcee53c27 BUG: 907311 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/4584 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: use gf_strdup() in place of strdup()Krutika Dhananjay2013-02-211-1/+1
| | | | | | | | | Change-Id: Idee71019dbc6eeaa0a808d671b29d6f3038a1a89 BUG: 913487 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/4562 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: log changes in volume set and volume reset codepathKrutika Dhananjay2013-02-191-46/+56
| | | | | | | | | Change-Id: Ieed9194768e434e54ea7d3d42b705eb600445cf4 BUG: 812356 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/4543 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
generated by cgit (git 2.34.1) at 2024-05-14 07:09:44 +0000