summaryrefslogtreecommitdiffstats
path: root/xlators/mgmt/glusterd/src/glusterd-op-sm.c
Commit message (Collapse)AuthorAgeFilesLines
* glusterd: fix brick restart parallelismAtin Mukherjee2017-11-011-12/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | glusterd's brick restart logic is not always sequential as there is atleast three different ways how the bricks are restarted. 1. through friend-sm and glusterd_spawn_daemons () 2. through friend-sm and handling volume quorum action 3. through friend handshaking when there is a mimatch on quorum on friend import. In a brick multiplexing setup, glusterd ended up trying to spawn the same brick process couple of times as almost in fraction of milliseconds two threads hit glusterd_brick_start () because of which glusterd didn't have any choice of rejecting any one of them as for both the case brick start criteria met. As a solution, it'd be better to control this madness by two different flags, one is a boolean called start_triggered which indicates a brick start has been triggered and it continues to be true till a brick dies or killed, the second is a mutex lock to ensure for a particular brick we don't end up getting into glusterd_brick_start () more than once at same point of time. Change-Id: I292f1e58d6971e111725e1baea1fe98b890b43e2 BUG: 1506513 Signed-off-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd: persist brickinfo's port change into glusterd's storeGaurav Yadav2017-10-311-1/+8
| | | | | | | | | | | | | | | | | | Problem: Consider a case where node reboot is performed and prior to reboot brick was listening to 49153. Post reboot glusterd assigned 49152 to brick and started the brick process but the new port was never persisted. Now when glusterd restarts glusterd always read the port from its persisted store i.e 49153 however pmap signin happens with the correct port i.e 49152. Fix: Make sure when glusterd_brick_start is called, glusterd_store_volinfo is eventually invoked. Change-Id: Ic0efbd48c51d39729ed951a42922d0e59f7115a1 BUG: 1506589 Signed-off-by: Gaurav Yadav <gyadav@redhat.com>
* gfproxyd: Let glusterd manage gfproxy daemonPoornima G2017-10-181-0/+20
| | | | | | | Updates: #242 BUG: 1428063 Change-Id: Iaaf2edf99b2ecc75f6d30762c752a6d445c1c826 Signed-off-by: Poornima G <pgurusid@redhat.com>
* Command to identify client processhari gowtham2017-09-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | command: gluster volume status <volname/all> client-list output: Client connections for volume v1 Name count ----- ------ fuse 2 tierd 1 total clients for volume v1 : 3 ----------------------------------------------------------------- Client connections for volume v2 Name count ----- ------ tierd 1 fuse.gsync 1 total clients for volume v2 : 2 ----------------------------------------------------------------- Updates: #178 Change-Id: I0ff2579d6adf57cc0d3bd0161a2ec6ac6c4747c0 Signed-off-by: hari gowtham <hgowtham@redhat.com> Reviewed-on: https://review.gluster.org/18095 Smoke: Gluster Build System <jenkins@build.gluster.org> Tested-by: hari gowtham <hari.gowtham005@gmail.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* libglusterfs: Add new fields to volume_options structKaushal M2017-08-291-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The new fields are required to enable equivalent volume set and volgen features, and some more additional features in GD2. GD2 does not use a hard-coded volume options map like GD1, but builds such by reading the options tables directly from the xlators. The new fields being introduced into the volume options struct include the following, - op-version - version(s) the option was introduced in - deprecated - version(s) the option was deprecated in - flags - flags for the option (settable, client, global, force, doc etc.) - tags - descriptive tags that apply to this option, can be used to group options - validate_fn - custom option validation function Enums for currently available flags have also been defined. To avoid a naming clashes, the flag enums in GD1 have been renamed. Updates #302 Change-Id: Ic7e08aef9e051beb47e8dc17d7f7be211aed308a Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: https://review.gluster.org/18059 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Amar Tumballi <amarts@redhat.com>
* glusterd: improve op-version error messageAtin Mukherjee2017-08-161-2/+6
| | | | | | | | | | | | | | | | | In case of a heterogeneous cluster if an admin sets a volume option which is higher than the current op-version the current error message only displays the version number of the new tunable. Better use experience is to dump the supported op-version in the error message as well. Change-Id: Ib42dadc574a401f79364178cb41ad21fb0b4432b BUG: 1328994 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: https://review.gluster.org/18020 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Joe Julian <me@joejulian.name> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Prashanth Pai <ppai@redhat.com>
* logging: localtime logging, cmdline, volume set optionKaleb S. KEITHLEY2017-08-031-1/+65
| | | | | | | | | | | | | | | | | Despite the fact that appliances generally use UTC, some users really want log entries in localtime. fixes gluster/glusterfs#272 feature page: https://review.gluster.org/17807 Change-Id: I5fbf2c3eedd9eb128fb3f851dd67b2f4081c8bba Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: https://review.gluster.org/16911 CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Samikshan Bairagya <samikshan@gmail.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* glusterd: Set default value for cluster.max-bricks-per-process to 0Samikshan Bairagya2017-07-191-2/+4
| | | | | | | | | | | | | | | | | | | When brick-multiplexing is enabled, and "cluster.max-bricks-per-process" isn't explicitly set, multiplexing happens without any limit set. But the default value set for that tunable is 1, which is confusing. This commit sets the default value to 0, and prevents the user from being able to set this value to 1 when brick-multiplexing is enbaled. The default value of 0 denotes that brick-multiplexing can happen without any limit on the number of bricks per process. Change-Id: I4647f7bf5837d520075dc5c19a6e75bc1bba258b BUG: 1472417 Signed-off-by: Samikshan Bairagya <samikshan@gmail.com> Reviewed-on: https://review.gluster.org/17819 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* core: miscellaneous cleanupKaleb S. KEITHLEY2017-07-141-6/+4
| | | | | | | | | | | | | | | | | | | | | | | clean up things that I tripped over doing other changes. 1) fix mishmash of random spacing in struct decls in glusterfs.h. Not technically a problem, just ugly to look at. 2) replace open-coded strings constants with existing #define constants. A disaster waiting to happen. 3) Use sys_access() instead of sys_stat() or sys_lstat() to test simple existence of file. Why copy dozens of bytes from kernel to user space that aren't going to be used by anything? There are probably more instances like these. Change-Id: I28089bef4cc93d5e4e4213045fb1a2649d110f82 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: https://review.gluster.org/17769 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Prashanth Pai <ppai@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us>
* glusterd: Introduce option to limit no. of muxed bricks per processSamikshan Bairagya2017-07-101-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit introduces a new global option that can be set to limit the number of multiplexed bricks in one process. Usage: `# gluster volume set all cluster.max-bricks-per-process <value>` If this option is not set then multiplexing will happen for now with no limitations set; i.e. a brick process will have as many bricks multiplexed to it as possible. In other words the current multiplexing behaviour won't change if this option isn't set to any value. This commit also introduces a brick process instance that contains information about brick processes, like the number of bricks handled by the process (which is 1 in non-multiplexing cases), list of bricks, and port number which also serves as an unique identifier for each brick process instance. The brick process list is maintained in 'glusterd_conf_t'. Updates: #151 Change-Id: Ib987d14ab0a4f6034dac01b73a4b2839f7b0b695 Signed-off-by: Samikshan Bairagya <samikshan@gmail.com> Reviewed-on: https://review.gluster.org/17469 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd: fix glusterd crash from glusterd_op_ac_rcvd_brick_op_accAtin Mukherjee2017-06-071-1/+1
| | | | | | | | | | | | | | | In out label, before checking ev_ctx->rsp_dict we should first check if ev_ctx is not NULL Change-Id: I28f4f1ee9070617a0e6a23a43af8c5756f96a47e BUG: 1452956 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: https://review.gluster.org/17478 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Gaurav Yadav <gyadav@redhat.com> Reviewed-by: Samikshan Bairagya <samikshan@gmail.com>
* glusterd: fix brick start raceAtin Mukherjee2017-06-061-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit tries to handle a race where we might end up trying to spawn the brick process twice with two different set of ports resulting into glusterd portmapper having the same brick entry in two different ports which will result into clients to fail connect to bricks because of incorrect ports been communicated back by glusterd. In glusterd_brick_start () checking brickinfo->status flag to identify whether a brick has been started by glusterd or not is not sufficient as there might be cases where while glusterd restarts glusterd_restart_bricks () will be called through glusterd_spawn_daemons () in synctask and immediately glusterd_do_volume_quorum_action () with server-side-quorum set to on will again try to start the brick and in case if the RPC_CLNT_CONNECT event for the same brick hasn't been processed by glusterd by that time, brickinfo->status will still be marked as GF_BRICK_STOPPED resulting into a reattempt to start the brick with a different port and that would result portmap go for a toss and resulting clients to fetch incorrect port. Fix would be to introduce another enum value called GF_BRICK_STARTING in brickinfo->status which will be set when a brick start is attempted by glusterd and will be set to started through RPC_CLNT_CONNECT event. For brick multiplexing, on attach brick request given the brickinfo->status flag is marked to started directly this value will not have any effect. Also this patch removes started_here flag as it looks to be redundant as brickinfo->status. Change-Id: I9dda1a9a531b67734a6e8c7619677867b520dcb2 BUG: 1457981 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: https://review.gluster.org/17447 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us>
* glusterd : volume profile command on one of the node crashes glusterdGaurav Yadav2017-05-231-5/+6
| | | | | | | | | | | | | | | | | | | | | When volume profile command is issued on one of the node glusterd crashes. Its a race condition which may hit when profile command and status command is being executed from node A and node B respectively. While doing so event GD_OP_STATE_BRICK_OP_SENT/GD_OP_STATE_BRICK_COMMITTED is being triggered. As handling of event is not thread safe, hence context got modify and glusterd crashes. With the fix now we are validating the context before using it. Change-Id: Ic07c3cdc5644677b0e40ff0fac6fcca834158913 BUG: 1452956 Signed-off-by: Gaurav Yadav <gyadav@redhat.com> Reviewed-on: https://review.gluster.org/17350 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Samikshan Bairagya <samikshan@gmail.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd: Make reset-brick work correctly if brick-mux is onSamikshan Bairagya2017-05-101-14/+0
| | | | | | | | | | | | | | | | | | | Reset brick currently kills of the corresponding brick process. However, with brick multiplexing enabled, stopping the brick process would render all bricks attached to it unavailable. To handle this correctly, we need to make sure that the brick process is terminated only if brick-multiplexing is disabled. Otherwise, we should send the GLUSTERD_BRICK_TERMINATE rpc to the respective brick process to detach the brick that is to be reset. Change-Id: I69002d66ffe6ec36ef48af09b66c522c6d35ac58 BUG: 1446172 Signed-off-by: Samikshan Bairagya <samikshan@gmail.com> Reviewed-on: https://review.gluster.org/17128 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd: hold off volume deletes while still restarting bricksJeff Darcy2017-03-301-0/+15
| | | | | | | | | | | | | | | | We need to do this because modifying the volume/brick tree while glusterd_restart_bricks is still walking it can lead to segfaults. Without waiting we could accidentally "slip in" while attach_brick has released big_lock between retries and make such a modification. Change-Id: I30ccc4efa8d286aae847250f5d4fb28956a74b03 BUG: 1432542 Signed-off-by: Jeff Darcy <jeff@pl.atyp.us> Reviewed-on: https://review.gluster.org/16927 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd: (storhaug) remove ganeshaKaleb S. KEITHLEY2017-03-211-47/+0
| | | | | | | | | | | | | | | | remove all vestiges of ganesha The storhaug CLI is used to manage ganesha and Samba. Also any setup and teardown of the ganesha HA is initiated using storhaug to preserve the proper layering. Change-Id: I0eec0016a1b7802a36e7b2d92896b86fdf8607d5 BUG: 1420713 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: https://review.gluster.org/16504 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* TIER: watermark check during low watermark resethari gowtham2017-03-181-0/+86
| | | | | | | | | | | | | | | | | | | PROBLEM: during a low watermark reset, checking of whether the low watermark is lower than hi watermark is not done. FIX: This patch checks if the hi watermark value is higher the default low watermark. Else throws an failure of the reset command Change-Id: I8b49090c6bccce6d45c2e8076ab766047a2a6162 BUG: 1328342 Signed-off-by: hari gowtham <hgowtham@redhat.com> Reviewed-on: https://review.gluster.org/14028 Smoke: Gluster Build System <jenkins@build.gluster.org> Tested-by: hari gowtham <hari.gowtham005@gmail.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd: set default GLUSTERD_QUORUM_RATIO_KEY value to 51Atin Mukherjee2017-02-091-1/+1
| | | | | | | | | | | | | | | | | | The default value of GLUSTERD_QUORUM_RATIO_KEY is set to 0, while this doesn't harm any functionality as the actual quorum calculation logic always take the factor that if the key is not set in the dictionary the value is considered to be 51 but from an user perspective it gives an incorrect output through volume get where quorum-ratio is always shown as 0 until reconfigured. Change-Id: I087712fa4736055859f29cc3bdbb3b111cbe7224 BUG: 1420611 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: https://review.gluster.org/16572 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* glusterd: glusterd is crashed at the time of stop volumeMohit Agrawal2017-02-081-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: glusterd is crashed at the time of stop volume due to overflow of pidfile array after build rpm with default options. Solution: To avoid the crash update the pidfile array size. Test: To test the patch followed below procedure 1) Setup 1*2 environment and start the volume 2) Stop the volume Before apply the patch glusterd is crashed. Note: The crash is happened only after build rpm with rpmbuild -ba <spec> because _FORTIFY_SOURCE is enabled. This option tries to figure out possible overflow scenarios like the bug here and crash the process. BUG: 1420202 Change-Id: I58a006bc0727843a7ed02a10b4ebd5dca39eae67 Signed-off-by: Mohit Agrawal <moagrawa@redhat.com> Reviewed-on: https://review.gluster.org/16560 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: N Balachandran <nbalacha@redhat.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* glusterd: double-check whether brick is alive for statsJeff Darcy2017-02-021-3/+14
| | | | | | | | | | | | | | | | | | | | | With multiplexing, our tests detach bricks from their host processes without glusterd being involved. Thus, when we ask glusterd to fetch profile info, it will try to fetch from a brick that's actually not present any more. While it can handle the process being dead and its RPC connection being closed, it barfs if it gets a negative response from a live brick process. This is not a problem in normal use, because the brick can't disappear without glusterd seeing it. The fix is to double check that the brick is actually running, by looking for its pidfile which the tests *do* clean up as part of killing a brick. Change-Id: I098465b175ecf23538bd7207357c752a2bba8f4e BUG: 1385758 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: https://review.gluster.org/16509 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* core: run many bricks within one glusterfsd processJeff Darcy2017-01-301-26/+101
| | | | | | | | | | | | | | | | | | | | | | | This patch adds support for multiple brick translator stacks running in a single brick server process. This reduces our per-brick memory usage by approximately 3x, and our appetite for TCP ports even more. It also creates potential to avoid process/thread thrashing, and to improve QoS by scheduling more carefully across the bricks, but realizing that potential will require further work. Multiplexing is controlled by the "cluster.brick-multiplex" global option. By default it's off, and bricks are started in separate processes as before. If multiplexing is enabled, then *compatible* bricks (mostly those with the same transport options) will be started in the same process. Change-Id: I45059454e51d6f4cbb29a4953359c09a408695cb BUG: 1385758 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: https://review.gluster.org/14763 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: regenerate volfiles on op-version bump upAtin Mukherjee2017-01-271-28/+59
| | | | | | | | | | | | Change-Id: I2fe7a3ebea19492d52253ad5a1fdd67ac95c71c8 BUG: 1416251 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: https://review.gluster.org/16455 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Prashanth Pai <ppai@redhat.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* features/trash: Create trash directory only when it is enabledJiffin Tony Thottan2017-01-201-9/+10
| | | | | | | | | | | | | | | | | | | | | Previously trash directory was being created as part of volume start operation. And also the user/admin could not delete this directory from volume even if it is not needed. This patch will fix the same. From now onwards creation and enforcement on trash directory will come into pictrure only when trash translator is enabled. Similarly exact same behaviour is reflected on internal-op directory inside trash directory. Change-Id: I3e58316a7b299a691885e458c960438bec2220fb BUG: 1264849 Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> Reviewed-on: http://review.gluster.org/12256 Smoke: Gluster Build System <jenkins@build.gluster.org> Tested-by: Anoop C S <anoopcs@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Anoop C S <anoopcs@redhat.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* tier : Tier as a servicehari gowtham2017-01-161-10/+179
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | tierd is implemented by separating from rebalance process. The commands affected: 1) Attach tier will trigger this process instead of old one 2) tier start and tier start force will also trigger this process. 3) volume status [tier] will show tier daemon as a process instead of task and normal tier status and tier detach status works. 4) tier stop implemented. 5) detach tier implemented separately along with new detach tier status 6) volume tier volname status will work using the changes. 7) volume set works This patch has separated the tier translator from the legacy DHT rebalance code. It now sends the RPCs from the CLI to glusterd separate to the DHT rebalance code. The daemon is now a service, similar to the snapshot daemon, and can be viewed using the volume status command. The code for the validation and commit phase are the same as the earlier tier validation code in DHT rebalance. The “brickop” phase has been changed so that the status command can use this framework. The service management framework is now used. DHT rebalance does not use this framework. This service framework takes care of : *) spawning the daemon, killing it and other such processes. *) volume set options , which are written on the volfile. *) restart and reconfigure functions. Restart is to restart the daemon at two points 1)after gluster goes down and comes up. 2) to stop detach tier. *) reconfigure is used to make immediate volfile changes. By doing this, we don’t restart the daemon. it has the code to rewrite the volfile for topological changes too (which comes into place during add and remove brick). With this patch the log, pid, and volfile are separated and put into respective directories. Change-Id: I3681d0d66894714b55aa02ca2a30ac000362a399 BUG: 1313838 Signed-off-by: hari gowtham <hgowtham@redhat.com> Reviewed-on: http://review.gluster.org/13365 Smoke: Gluster Build System <jenkins@build.gluster.org> Tested-by: hari gowtham <hari.gowtham005@gmail.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd: Get maximum supported op-version in a clusterSamikshan Bairagya2017-01-081-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | gluster volume get <VOLNAME> cluster.opversion gives us the current op-version on which the cluster is operating. There is no command that lets the user know the maximum supported op-version that the cluster can run on. This patch adds a new global option cluster.max-op-version, that can be used to retrieve the maximum supported op-version in a cluster. Usage: # gluster volume get all cluster.max-op-version Example output: Option Value ------ ----- cluster.max-op-version 30900 NOTE: The only way to test this feature for now is to set the GD_OP_VERSION_MAX macro to different values (30800 for 3.8,30900 for 3.9, and so on) and rebuild glusterd. Since the regression test framework currently doesn't have support to simulate these tests, there are no accompanying regression tests for this feature. It should be possible to add tests once glusto comes in and makes it easier to run a heterogeneous cluster. Change-Id: I547480ee5e7912664784643e436feb198b6d16d0 BUG: 1365822 Signed-off-by: Samikshan Bairagya <samikshan@gmail.com> Reviewed-on: http://review.gluster.org/16283 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd, cli: Get global options through volume get functionalitySamikshan Bairagya2016-12-301-29/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | Currently it is not possible to retrieve values of global options by using the 'gluster volume get' functionality if there are no volumes present. In order to get the global options one has to use 'gluster volume get' with a specific volume name. This usage makes the illusion as though the option is set only on one volume, which is incorrect. When setting the global options, 'gluster volume set' provides a way to set them using the volume name as 'all'. Similarly, retrieving the global options should be made possible by using the volume name 'all' with the 'gluster volume get' functionality. This patch adds that functionality to 'volume get' Usage: # gluster volume get all <OPTION/all> Change-Id: Ic2fdb9eda69d4806d432dae26d117d9660fe6d4e BUG: 1378842 Signed-off-by: Samikshan Bairagya <samikshan@gmail.com> Reviewed-on: http://review.gluster.org/15563 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd/ganesha : handle volume reset properly for ganesha optionsJiffin Tony Thottan2016-12-061-30/+27
| | | | | | | | | | | | | | | | | The "gluster volume reset" should first unexport the volume and then delete export configuration file. Also reset option is not applicable for ganesha.enable if volume value is "all". This patch also changes the name of create_export_config into manange_export_config Change-Id: Ie81a49e7d3e39a88bca9fbae5002bfda5cab34af BUG: 1397795 Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> Reviewed-on: http://review.gluster.org/15914 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: soumya k <skoduri@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* cluster/afr: CLI for granular entry heal enablement/disablementKrutika Dhananjay2016-11-281-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | When there are already existing non-granular indices created that are yet to be healed, if granular-entry-heal option is toggled from 'off' to 'on', AFR self-heal whenever it kicks in, will try to look for granular indices in 'entry-changes'. Because of the absence of name indices, granular entry healing logic will fail to heal these directories, and worse yet unset pending extended attributes with the assumption that are no entries that need heal. To get around this, a new CLI is introduced which will invoke glfsheal program to figure whether at the time an attempt is made to enable granular entry heal, there are pending heals on the volume OR there are one or more bricks that are down. If either of them is true, the command will be failed with the appropriate error. New CLI: gluster volume heal <VOL> granular-entry-heal {enable,disable} Change-Id: I1f4fe8162813b9068e198965d94169fee4adc099 BUG: 1370410 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/15747 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd/quota: upgrade quota.conf file during an upgradeManikandan Selvaganesh2016-11-071-11/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem ======= When quota is enabled on 3.6, it will have quota conf version in quota.conf as v1.1. This node gets upgraded to 3.7 but it will still have quota conf version as v1.1 until a quota enable/disable/set limit is initiated. When this is not initiated and when this node tries to peer probe a node which is a fresh install of 3.7 (which will have quota conf version as v1.2), then this will result in "Peer rejected" state. This patch fixes the issue. Solution ======== When an upgrade happens from 3.6 to 3.7, quota.conf file needs to be modified as well. With 3.6, in quota.conf the version will be v1.1 and it needs to be changed to v1.2 from 3.7. This is because in 3.7, inode quota feature is introduced. So when an op-version bumpup happens quota.conf needs to be upgraded with quota conf version v1.2 and all the 16 byte uuid needs to be changed to 17 bytes uuid as well. Previously, when the cluster version is upgraded to 3.7, the quota.conf got upgraded as well. But, the upgradation was done only when quota enable/disable/set limit is done. With this patch, the upgradation is done during a cluster op version bump up as well. Change-Id: Idb5ba29d3e1ea0e45c85d87c952c75da9e0f99f0 BUG: 1371539 Signed-off-by: Manikandan Selvaganesh <mselvaga@redhat.com> Reviewed-on: http://review.gluster.org/15352 Tested-by: Atin Mukherjee <amukherj@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd/shared storage: Check for hook-script at stagingAvra Sengupta2016-10-271-6/+23
| | | | | | | | | | | | | | | | | Check if S32gluster_enable_shared_storage.sh is present at /var/lib/glusterd/hooks/1/set/post/ at staging before proceeding with the command. Fail the command with the appropriate error message in case it is not present. Change-Id: I84e3912f1cdffb927f8a40d74d52be43ee69388b BUG: 1388348 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/15718 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd: use GF_BRICK_STOPPING as intermediate brickinfo->status stateAtin Mukherjee2016-10-251-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | On a volume stop trigger glusterd issues a brick-op to terminate the brick process during brick-op phase , however in the commit-op glusterd once again tries to kill the same process if it exists and then mark the brickinfo->status flag to GF_BRICK_STOPPED. In the former case, if brick is successfully killed there is a possibility that GlusterD will receive RPC_CLNT_DISCONNECT from the said brick process before even the commit op phase is executed and hence by that time brickinfo->status will still be set to GF_BRICK_STARTED. BRICK_DISCONNECT event should be only sent if a brick has been killed and not through a volume stop/remove brick trigger, however due to this trace, this event is also sent out on a volume stop. Fix is to introduce an intermediate state GF_BRICK_STOPPING which can be used to mark the brick status at brick op phase of volume stop/remove brick to avoid sending spurious BRICK_DISCONNECT events on a volume stop trigger. Change-Id: Ieed4450e1c988715e0f9958be44faa6b14be81e1 BUG: 1387652 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/15699 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kaushal M <kaushal@redhat.com>
* glusterd: enable default configurations post upgrade to >= 3.9.0 versionsAtin Mukherjee2016-10-161-2/+63
| | | | | | | | | | | | | | | | | | | With 3.8.0 onwards volume options like nfs.disable, transport.address-family have some default configuration value. If a volume was created pre upgrade to 3.8.0 or higher the default options are not set post upgrade. This patch takes care of putting the default values in the op-version bump up workflow. However these changes will only reflect from 3.9.0 onwards Change-Id: I9a8d848cd08d87ddcb80dbeac27eaae097d9cbeb BUG: 1379223 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/15568 Reviewed-by: jiffin tony Thottan <jthottan@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: soumya k <skoduri@redhat.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* glusterd: "gluster v heal test statistics heal-count replica" output is not ↵Mohit Agrawal2016-09-261-3/+2
| | | | | | | | | | | | | | | | | | | | correct Problem : "gluster v heal test statistcs heal-count replica" does not show correct output. Solution: After update condition (match brick name) in _select_hxlator_with_matching_brick, it shows correct output. BUG: 1325792 Change-Id: I60cc7c68ea70bce267a747570f91dcddbc1d9016 Signed-off-by: Mohit Agrawal <moagrawa@redhat.com> Reviewed-on: http://review.gluster.org/15494 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Ravishankar N <ravishankar@redhat.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd: fix return val in glusterd_op_volume_dict_uuid_to_hostname ()Atin Mukherjee2016-09-261-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | glusterd_op_volume_dict_uuid_to_hostname () ignores few dict_get_str failures but doesn't reset the ret value to 0. Reproducer steps: 1. Configure a volume and start it (gNFS has to be disabled) 2. gluster volume status An warning log is observed with: [MSGID: 106217] [glusterd-op-sm.c:4706:glusterd_op_modify_op_ctx] 0-management: Failed uuid to hostname conversion [2016-09-22 09:21:38.537533] W [MSGID: 106387] [glusterd-op-sm.c:4812:glusterd_op_modify_op_ctx] 0-management: op_ctx modification failed Change-Id: I1d3aa79304d83a9d5db1b7198773d8c2780e24a9 BUG: 1378492 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/15547 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Samikshan Bairagya <samikshan@gmail.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* xlators/glusterd: fix unused variable warnings/errorsKaleb S. KEITHLEY2016-09-131-1/+0
| | | | | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a "pragma leak" where the generated rpc/xdr headers have a pair of pragmas that disable these warnings. With the warnings disabled, many unused variables have crept into the code base. And 14085 won't pass its own smoke test until all these warnings are fixed. BUG: 1369124 Change-Id: I7ccaa4f1cc817fa81082cee83e99a2dc7e542e17 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15479 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kotresh HR <khiremat@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd (op-sm): fix unused variable warnings/errorsKaleb S. KEITHLEY2016-08-301-20/+0
| | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a/the "leak" - via the generated rpc/xdr headers - of pragmas that mask these warnings. However 14085 won't pass the smoke test until all the warnings are fixed. Change-Id: I6c1474547586b5e43f30545872ec512cdd32dac2 BUG: 1369124 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15269 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Prashanth Pai <ppai@redhat.com>
* glusterd : Introduce reset brickAnuradha Talur2016-08-291-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The command basically allows replace brick with src and dst bricks as same. Usage: gluster v reset-brick <volname> <hostname:brick-path> start This command kills the brick to be reset. Once this command is run, admin can do other manual operations that they need to do, like configuring some options for the brick. Once this is done, resetting the brick can be continued with the following options. gluster v reset-brick <vname> <hostname:brick> <hostname:brick> commit {force} Does the job of resetting the brick. 'force' option should be used when the brick already contains volinfo id. Problem: On doing a disk-replacement of a brick in a replicate volume the following 2 scenarios may occur : a) there is a chance that reads are served from this replaced-disk brick, which leads to empty reads. b) potential data loss if next writes succeed only on replaced brick, and heal is done to other bricks from this one. Solution: After disk-replacement, make sure that reset-brick command is run for that brick so that pending markers are set for the brick and it is not chosen as source for reads and heal. But, as of now replace-brick for the same brick-path is not allowed. In order to fix the above mentioned problem, same brick-path replace-brick is needed. With this patch reset-brick commit {force} will be allowed even when source and destination <hostname:brickpath> are identical as long as 1) destination brick is not alive 2) source and destination brick have the same brick uuid and path. Also, the destination brick after replace-brick will use the same port as the source brick. Change-Id: I440b9e892ffb781ea4b8563688c3f85c7a7c89de BUG: 1266876 Signed-off-by: Anuradha Talur <atalur@redhat.com> Reviewed-on: http://review.gluster.org/12250 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Ashish Pandey <aspandey@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* glusterd/ganesha : create export configuration file in shared storageJiffin Tony Thottan2016-08-261-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the second patch which moves export related configuration for a volume into shared storage. The main change includes in scripts create-export-ganesha.sh, dbus-send.sh and the handling of volume set command "ganesha.enable". The manipulation of EXPORT_ID move from dbus-send.sh to create-export-ganesha.sh. In volume set handling following has performed stage | commit ---------------------------------------------------------- 1.) gluster v set <volname> ganesha.enable on None | create export file | in node where cli executed, | thne export volume via dbus 2.) gluster v set <volname> ganesha.enable off unexport volume via dbus | remove export file from the | shared storage ----------------------------------------------------------- More details can be found at http://review.gluster.org/#/c/15105/ Change-Id: Ia8b0e89bc8fff24b0bc5d20a538a89212894a8e4 BUG: 1355956 Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> Reviewed-on: http://review.gluster.org/14908 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: soumya k <skoduri@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* Revert "glusterd-ganesha : copy ganesha export configuration files during ↵Jiffin Tony Thottan2016-08-261-1/+1
| | | | | | | | | | | | | | | | | | | | | reboot" This reverts commit f71e2fa49af185779b9f43e146effd122d4e9da0. Reason: As part of sync up node reboot this patch copies ganesha export conf file from a source node. This change is no more require if the export files are available in shared storage. Change-Id: Id9c1ae78377bbd7d5d80aa1c14f534e30feaae97 BUG: 1355956 Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> Reviewed-on: http://review.gluster.org/14907 Reviewed-by: soumya k <skoduri@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* ganesha/scripts : remove 'HA_VOL_SERVER' from the codeJiffin Tony Thottan2016-08-251-1/+1
| | | | | | | | | | | | | | | | | | | | The parameter HA_VOL_SERVER introduced intially ganesha-ha.conf to specify gluster server from which to mount the shared data volume. But after introducing new cli for the same purpose, it become unnecessary. The existence of that parameter can lead confussion to the users. This patch will remove/replace all the instance of HA_VOL_SERVER from the code Change-Id: I638c61dcd2c21ebdb279bbb141d35bb806bd3ef0 BUG: 1350371 Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> Reviewed-on: http://review.gluster.org/14812 Tested-by: Kaleb KEITHLEY <kkeithle@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: soumya k <skoduri@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* feature/bitrot: Ondemand scrub option for bitrotKotresh HR2016-08-251-4/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The bitrot scrubber takes 'hourly/daily/biweekly/monthly' as the values for 'scrub-frequency'. There is no way to schedule the scrubbing when the admin wants it. Ondemand scrubbing brings in the new option 'ondemand' with which the admin can start scrubbing ondemand. It starts the scrubbing immediately. Ondemand scrubbing is successful only if the scrubber is in 'Active (Idle)' (waiting for it's next frequency cycle to start scrubbing). It is not entertained when the scrubber is in 'Paused' or already running. Here is the command line syntax. gluster volume bitrot <vol name> scrub ondemand Change-Id: I84c28904367eed827a7dae8d6a535c14b28e9f4d BUG: 1366195 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/15111 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* glusterd/ganesha : Move ganesha-ha.conf and ganesha.conf to shared storageJiffin Tony Thottan2016-08-251-5/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently all the ganesha related configuration files(ganesha.conf, ganesha-ha.conf, export files, etc) is stored locally at /etc/ganesha on a every node in ganesha cluster. Usually we end up in two issues by doing so : * difficult in modifiying ganesha related conf file * diffciult to maintain consistency of conf file across ganesha cluster To tackle this, we plan to move all the ganesha configuration to shared storage. As a first step in this patch ganesha.conf and ganesha-ha.conf move to shared storage. Here actual ganesha.conf will resides in shared stoarge and symlinks will be created in /etc/ganesha when the option "gluster nfs-ganesha enable" is executed and remove those during the "disable" part. Modified prerequisites to done before running globaloption: * enable shared storage * create nfs-ganesha folder in shared storage * create ganesha.conf and ganesha-ha.conf in it More details can be found at http://review.gluster.org/#/c/15105/ Change-Id: Ifabb6c5db50061f077a03932940190af74e2ca7f BUG: 1355956 Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> Reviewed-on: http://review.gluster.org/14906 Reviewed-by: soumya k <skoduri@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* glusterd: Add async eventsAtin Mukherjee2016-08-221-1/+10
| | | | | | | | | | | | | | | | | | | As the eventing framework is already in the code, this patch targets to capture all the async glusterd events which are important to be notified to the higher layers which consume the eventing framework. I plan to break this work into two different patches where this patch set covers the first set of events. Change-Id: Ie1bd4f6fa84117b26ccb4c75bc4dc68e6ef19134 BUG: 1360809 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/15015 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Rohan Kanade <rkanade@redhat.com> Reviewed-by: Samikshan Bairagya <samikshan@gmail.com>
* dict: Don't expose get_new_dict/dict_destroyPranith Kumar K2016-07-251-2/+2
| | | | | | | | | | | | | | | get_new_dict/dict_destroy is causing confusion where, dict_new/dict_destroy or get_new_dict/dict_unref are used instead of dict_new/dict_unref. Change-Id: I4cc69f5b6711d720823395e20fd624a0c6c1168c BUG: 1296043 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/13183 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com>
* glusterd: copy real_path from older brickinfo during brick importAtin Mukherjee2016-05-181-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | In glusterd_import_new_brick () new_brickinfo->real_path will not be populated for the first time and hence if the underlying file system is bad for the same brick, import will fail resulting in inconsistent configuration data. Fix is to populate real_path from old brickinfo object. Also there were many cases where we were unnecessarily calling realpath() and that may cause in failure. For eg - if a remove brick is executed with a brick whoose underlying file system has crashed, remove-brick fails since realpath() call fails. We'd need to call realpath() here as the value is of no use.Hence passing construct_realpath as _gf_false in glusterd_volume_brickinfo_get_by_brick () is a must in such cases. Change-Id: I7ec93871dc9e616f5d565ad5e540b2f1cacaf9dc BUG: 1335531 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/14306 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* glusterd-ganesha : copy ganesha export configuration files during rebootJiffin Tony Thottan2016-05-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | glusterd creates export conf file for ganesha using hook script during volume start and ganesha_manage_export() for volume set command. But this routine is not added in glusterd restart scenario. Consider the following case, in a three node cluster a volume got exported via ganesha while one of the node is offline(glusterd is not running). When the node comes back online, that volume is not exported on that node due to the above mentioned issue. Also I have removed unused variables from glusterd_handle_ganesha_op() For this patch to work pcs cluster should running on that be node. Change-Id: I5b2312c2f3cef962b1f795b9f16c8f0a27f08ee5 BUG: 1330097 Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> Reviewed-on: http://review.gluster.org/14063 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: soumya k <skoduri@redhat.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd: default value of nfs.disable, change from false to trueKaleb S KEITHLEY2016-04-271-4/+3
| | | | | | | | | | | | | | | | | | Next step in eventual deprecation of glusterfs nfs server in favor of ganesha.nfsd. Also replace several open-coded strings with constant. Change-Id: If52f5e880191a14fd38e69b70a32b0300dd93a50 BUG: 1092414 Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/13738 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Tested-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* glusterd: fix validation of lower op-version check in volume setAtin Mukherjee2016-04-261-2/+2
| | | | | | | | | | | | | | | | Commit 2d87a98 introduced a validation to fail lowering down the cluster.op-version. Commit 2eb8758 actually changed the variable value from cluster's op-version to volume's op-version which resulted the logic go for a toss. Change-Id: I70df32b75c3a3fe47dc840c4a655059e5b124bca BUG: 1315186 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/14069 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* glusterd: populate brickinfo->real_path conditionallyAtin Mukherjee2016-04-111-6/+11
| | | | | | | | | | | | | | | | | | | | glusterd_brickinfo_new_from_brick () is called from multiple places and one of them is glusterd_brick_rpc_notify where its very well possible that an underlying brick's file system has crashed and a disconnect event has been received. In this case glusterd tries to build the brickinfo from the brickid in the RPC request, however the same fails as glusterd_brickinfo_new_from_brick () fails from realpath. Fix is to skip populating real_path if its a disconnect event. Change-Id: I9d9149c64a9cf2247abb731f219c1b1eef037960 BUG: 1325841 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/13965 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* glusterd: Fix connected clients check during 'volume set'Kaushal M2016-03-221-35/+41
| | | | | | | | | | | | | | | | | | | Use the volume's newly calulatedclient-op-version for the connected clients check. This prevents rejection of server options of higher op-version when clients of lower op-version are connected. Also, initialize the variables of the newly calculated volume op-version and client-op-version with the current values, instead of the cluster op-version. Change-Id: Ieb36f97c677a5457feba54bef20e154c0456e70e BUG: 1004332 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/5786 Tested-by: Atin Mukherjee <amukherj@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>