summaryrefslogtreecommitdiffstats
path: root/xlators/features
Commit message (Collapse)AuthorAgeFilesLines
* features/shard: Make o-direct writes work with shardingKrutika Dhananjay2016-04-161-0/+6
| | | | | | | | | | | | | | | | | | | | | Backport of: http://review.gluster.org/#/c/13846/ With files opened with o-direct, the expectation is that the IO performed on the fds is byte aligned wrt the sector size of the underlying device. With files getting sharded, a single write from the application could be broken into more than one write falling on different shards which _might_ cause the original byte alignment property to be lost. To get around this, shard translator will send fsync on odirect writes to emulate o-direct-like behavior in the backend. Change-Id: I992e10162afcca17a19d9cba3bcb187a31c618ae BUG: 1325843 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/13966 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* arbiter: write performance improvementRavishankar N2016-04-111-8/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Backport of: http://review.gluster.org/#/c/13906 Problem: The throughput for a 'dd' workload was much less for arbiter configuration when compared to normal replica-3 volume. There were 2 issues: i)arbiter_writev was using the request dict as response dict while unwinding, leading to incorect GLUSTERFS_WRITE_IS_APPEND and GLUSTERFS_OPEN_FD_COUNT values (=4), leading to immediate post-ops because is_afr_delayed_changelog_post_op_needed() failed due to afr_are_multiple_fds_opened() check. ii) The arbiter code in afr was setting local->transaction.{start and len} =0 to take full file locks. What this meant was even for simultaenous but non-overlapping writevs, afr_transaction_eager_lock_init() was not happening because afr_locals_overlap() always stays true. Consequently is_afr_delayed_changelog_post_op_needed() failed due to local->delayed_post_op not being set. Fix: i) Send appropriate response dict values in arbiter_writev. ii) Modify flock params instead of local->transaction.{start and len} to take full file locks in the transaction. Also changed _fill_writev_xdata() in posix to fill rsp_xdata for whatever key is requested for. Change-Id: I1c5fc5e98aba49ade540bb441a022e65b753432a BUG: 1324809 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reported-by: Robert Rauch <robert.rauch@gns-systems.de> Reported-by: Russel Purinton <russell.purinton@gmail.com> Reviewed-on: http://review.gluster.org/13925 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* marker: do mq_reduce_parent_size_txn in FG for unlink & rmdirvmallika2016-04-063-32/+90
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a backport of http://review.gluster.org/#/c/13874/ * If a "rm -rf" is performed by a client, we initiate a marker background operation mq_reduce_parent_size_txn for rmdir and unlink. mq_reduce_parent_size_txn can fail when updating size on the ancestor directories, if these directories are removed during the txn as the child-parent association removed in the dentry list. So execute mq_reduce_parent_size_txn in foreground and then do the UNWIND for rmdir and unlink FOP > Change-Id: Iefcdced4c6ae0dbd43f92814d0ddcd1e33825864 > BUG: 1322489 > Signed-off-by: vmallika <vmallika@redhat.com> Change-Id: I79e4b53e4bacd39d23dad5278a7d02a338e59195 BUG: 1324040 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/13910 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* marker: optimize mq_update_dirty_inode_taskvmallika2016-04-061-50/+44
| | | | | | | | | | | | | | | | | | | | | This is a backport of http://review.gluster.org/#/c/13892/ In function mq_update_dirty_inode_task we do readdirp on a dirty directory and for entry we again do lookup to fecth the contribution xattr. We can fetch this contribution as part of readdirp > Change-Id: I766593c0dba793f1ab3b43625acce1c7d9af8d7f > BUG: 1320818 > Signed-off-by: vmallika <vmallika@redhat.com> Change-Id: Id826a09a72529f7435372ea7f04068dd10da5fcb BUG: 1324040 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/13908 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* quota: check inode limits only when new file/dir is createdvmallika2016-04-062-10/+27
| | | | | | | | | | | | | | | | | | | | This is a backport of http://review.gluster.org/#/c/13911/ When a inode limit is full, writes to any existing file fails with disk quota exceed even if usage limit is not set or usage limit is not full. > BUG: 1323486 > Change-Id: I9679fe26a2839ade0b1541fa7f0a2b71ac6dcc31 > Signed-off-by: vmallika <vmallika@redhat.com> Change-Id: I55ec86ebecbb8490e557c61090f6fb8c6c449ec7 BUG: 1324058 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/13912 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* marker: build_ancestry in markervmallika2016-04-063-19/+162
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a backport of http://review.gluster.org/#/c/13857/ * quota-enforcer doesn't execute build_ancestry in the below code path 1) Special client (PID < 0) 2) unlink 3) rename within the same directory 4) link within the same directory In these cases, marker accounting can fail as parent not found. We need to build_ancestry in marker if it doesn't find parent during update txn > Change-Id: Idb7a2906500647baa6d183ba859b15e34769029c > BUG: 1320818 > Signed-off-by: vmallika <vmallika@redhat.com> Change-Id: Ib56a556bdeebcc498d59599baf4655be05d765e5 BUG: 1324040 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/13907 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* storage/posix: send proper iatt attributes for the root inodevmallika2016-04-042-43/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a backport of http://review.gluster.org/13730 * changes in posix to send proper iatt attributes for the root directory when ancestry is built. Before posix was filling only the gfid and the inode type in the iatt structure keeping rest of the fields zeros. This was cached by posix-acl and used to send EACCES when some fops came on that object if the uid of the caller is same as the uid of the object on the disk. * getting and setting inode_ctx in function 'posix_acl_ctx_get' is not atomic and can lead to memory leak when there are multiple lookups for an inode at same time. This patch fixes this problem * Linking an inode in posix_build_ancestry, can cause a race in posix_acl. When parent inode is linked in posix_build_ancestry, and before it reaches posix_acl_readdirp_cbk, create/lookup can come on a leaf-inode, as parent-inode-ctx not yet updated in posix_acl_readdirp_cbk, create/lookup can fail with EACCESS. So do the inode linking in the quota xlator > Change-Id: I3101eefb65551cc4162c4ff2963be1b73deacd6d > BUG: 1320818 > Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> > Reviewed-on: http://review.gluster.org/13730 > Tested-by: Vijaikumar Mallikarjuna <vmallika@redhat.com> > Smoke: Gluster Build System <jenkins@build.gluster.com> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > CentOS-regression: Gluster Build System <jenkins@build.gluster.com> > Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Change-Id: I65b0bbf83e563b519db07f2bcddcc6465743b6ea BUG: 1320892 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/13825 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* Revert "cluster/ec: Rebalance hangs during rename"Kaushal M2016-04-015-177/+50
| | | | | | | This reverts commit 3d34c495d547866a533bc0614b14163381830095, which broke building rpms and possibly other packages as well. Change-Id: I2c10a613599e63bc0cbdb1b405cd87be9efa4a99
* features/changelog: Don't modify 'pargfid' in 'resolve_pargfid_to_path'Kotresh HR2016-03-312-2/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/#/c/13845/ If 'changelog' is enabled and 'changelog.capture-del-path' option is on it calls 'resolve_pargfid_to_path' which modifies 'pargfid' sent by caller. 'changelog_unlink' calls this routine directly with 'loc->pargfid' resulting it being modified and point to root instead of actual pargfid. This is a nasty bug and could cause the deletion of entry on root directory instead on actual parent when 'loc->path' is not present. Hence this fix to make 'pargfid' a const pointer and 'resolve_pargfid' to work on copy of pargfid. Glusterfind session creation enables these options by default to capture deleted entry path in changelog. Thanks Pranith for root causing this. BUG: 1322552 Change-Id: I9f2bc44b5604b224462594c12b7d79e68198d693 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/13861 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* cluster/ec: Rebalance hangs during renameAshish Pandey2016-03-315-50/+177
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: During the rename of a particular file (ec is holding blocking inodelk on the parent directory), if the rename of another file under the same directory comes. EC does not release the lock and goes ahead and renames the "new" file with the "already held lock". That causes rebalance process to be blocked on a lock which has been acquired by rename. Solution: While rename fop comes, ec takes blocking inodelk on old and new parent of the file. Before releasing, every lock held by ec, it waits for some "time" to see if that lock can be reused by the next fop. If within this "time" some other request comes, it releases this lock based on condition "lock count > 1" To get this "lock count" for rename fop, we have implemented "pl_rename" in feature/lock. Also, on ec side, changed the condition to release the lock based on the type of fop and old and new parent directories. master- http://review.gluster.org/#/c/13460/ Change-Id: I979dbab1185df962e8f305a6074ae1186ffe7db0 Bug: 1322299 Signed-off-by: Ashish Pandey <aspandey@redhat.com> Reviewed-on: http://review.gluster.org/13849 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* features/index: Get gfid type in readdirPranith Kumar K2016-03-311-1/+46
| | | | | | | | | | | | | | | | | | | | | | >Change-Id: I2a6174e1af70a94a52b0b735fd8504800a7ea173 >BUG: 1313135 >Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> >Reviewed-on: http://review.gluster.org/13553 >Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> >Smoke: Gluster Build System <jenkins@build.gluster.com> >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> >Reviewed-by: Anuradha Talur <atalur@redhat.com> >CentOS-regression: Gluster Build System <jenkins@build.gluster.com> >(cherry picked from commit 459d0a5e173f9d9f597aec89f81e5377425eb8fb) Change-Id: I3384906201129d3e03a56bc4b071302028f6953b BUG: 1322516 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/13858 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Anuradha Talur <atalur@redhat.com>
* features/shard: Implement discard fopKrutika Dhananjay2016-03-241-5/+22
| | | | | | | | | | | | | | Backport of: http://review.gluster.org/13657 Change-Id: I1b5163ca1ceee846963f6b7d8df62dbb348afbbc BUG: 1299712 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/13774 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Ravishankar N <ravishankar@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* uss/gluster: generate gfid for snapshot files from snapname and gfidvmallika2016-03-233-33/+122
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a backport of http://review.gluster.org/#/c/9255/ If 'a' and 'b' are hardlinks, we need to generate a virtual gfid for these files so that the inode number for 'a' and 'b' are same. Generate gfid as below: gfid_of_a = MD5(snapname + back_end_gfid(a)) if '/dir1/a' and '/dir2/b' are hardlinks, then inode number should be same for all below files: /mnt/.snaps/snap1/dir1/a /mnt/.snaps/snap1/dir2/b /mnt/dir1/.snaps/snap1/a /mnt/dir2/.snaps/snap1/b > Change-Id: Ifda793455610e554f3f1e4cbb90d44c02cda4b0f > BUG: 1171703 > Signed-off-by: vmallika <vmallika@redhat.com> Change-Id: I917b2fe2915d88f69700bc8c3283e9c613e13bb8 BUG: 1316099 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/13656 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* marker: set inode ctx before lookup unwindvmallika2016-03-223-39/+99
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a backport of http://review.gluster.org/13748 When a file is unlinked before it was accounted by the marker, then we may see error "ctx for the node ... is NULL" at many places. This is actually not an error and can be ignored. It is better to set the inode ctx before lookup/create is unwind back to protocol server > Change-Id: I462b5542951f2fc2964f59af7a31978979dab1de > BUG: 1318158 > Signed-off-by: vmallika <vmallika@redhat.com> > Reviewed-on: http://review.gluster.org/13748 > Smoke: Gluster Build System <jenkins@build.gluster.com> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > CentOS-regression: Gluster Build System <jenkins@build.gluster.com> > Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Change-Id: I04b03e3caefc7fbd5e79b3f73980e2ccb0cb57f5 BUG: 1320024 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/13804 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* features/bit-rot-stub: get frame->local before unwindingRaghavendra Bhat2016-03-091-3/+5
| | | | | | | | | | | | | | | | | In bit-rot-stub, if unlink fails, then it was unwinding directly. Then it was trying to cleanup local. But local would be NULL, since it was unwinding directly without getting the value of frame->local. The NULL cleanup of local was causing the brick process to crash. Change-Id: I8544ba73b2e8dc0c50b1a53ff8027d85588d087b BUG: 1315552 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/13630 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* features/shard: Return ENOTSUP for unsupported fallocate flagsKrutika Dhananjay2016-03-091-0/+8
| | | | | | | | | | | | | | | | Backport of: http://review.gluster.org/13523 Basis: http://lists.gnu.org/archive/html/qemu-devel/2016-02/msg05101.html Change-Id: I681eb4d0c43c635cf96a2deab0996dec7a255fe5 BUG: 1299712 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/13652 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Ravishankar N <ravishankar@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* afr: misc performance improvementsRavishankar N2016-03-081-0/+18
| | | | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/#/c/13595/ 1. In afr_getxattr_cbk, consider the errno value before blindly launching an inode refresh and a subsequent retry on other children. 2. We want to accuse small files only when we know for sure that there is no IO happening on that inode. Otherwise, the ia_sizes obtained in the post-inode-refresh replies may mismatch due to a race between inode-refresh and ongoing writes, causing spurious heal launches. Change-Id: I9858485d1061db67353ccf99c59530731649c847 BUG: 1309462 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/13644 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* features/trash: Handle unlink unwind properlyAnoop C S2016-03-081-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When enabled, trash translator does a rename internally for every unlink request and unwinds the original unlink call. But this was unwinded back with prerparent and postparent as NULL which resulted in changing the parent directory permissions to 000. This issue is consistently seen as a failure when a non-root user executes vim commands which internally tries to perform stat operations (as part of swap/backup file creation) on a file whose parent directory's permission was modified to 000 due to recent unlink for another file inside the same directory. >Change-Id: I161a036b37fb815866d50d2d6260ff0ad22d7223 >BUG: 1302307 >Signed-off-by: Anoop C S <anoopcs@redhat.com> >Reviewed-on: http://review.gluster.org/13346 >Smoke: Gluster Build System <jenkins@build.gluster.com> >Tested-by: jiffin tony Thottan <jthottan@redhat.com> >Reviewed-by: jiffin tony Thottan <jthottan@redhat.com> >CentOS-regression: Gluster Build System <jenkins@build.gluster.com> >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> (cherry picked from commit b609a55be4119c44b19252bd951780a78deb21c9) Signed-off-by: Anoop C S <anoopcs@redhat.com> Change-Id: I88950b7d2e42bda65272bc359e8dc60a2ce04d89 BUG: 1305749 Reviewed-on: http://review.gluster.org/13401 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: jiffin tony Thottan <jthottan@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com>
* features/bitrot: do not remove the quarantine handle in forgetRaghavendra Bhat2016-03-071-8/+96
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If an object is marked as bad, then an entry is corresponding to the bad object is created in the .glusterfs/quarantine directory to help scrub status. The entry name is the gfid of the corrupted object. The quarantine handle is removed in below 2 cases. 1) When protocol/server revceives the -ve lookup on an entry whose inode is there in the inode table (it can happen when the corrupted object is deleted directly from the backend for recovery purpose) it sends a forget on the inode and bit-rot-stub removes the quarantine handle in upon getting the forget. refer to the below commit f853ed9c61bf65cb39f859470a8ffe8973818868: http://review.gluster.org/12743) 2) When bit-rot-stub itself realizes that lookup on a corrupted object has failed with ENOENT. But with step1, there is a problem when the bit-rot-stub receives forget due to lru limit exceeding in the inode table. In such cases, though the corrupted object is not deleted (either from the mount point or from the backend), the handle in the quarantine directory is removed and that object is not shown in the bad objects list in the scrub status command. So it is better to follow only 2nd step (i.e. bit-rot-stub removing the handle from the quarantine directory in -ve lookups). Also the handle has to be removed when a corrupted object is unlinked from the mount point itself. Change-Id: Ibc3bbaf4bc8a5f8986085e87b729ab912cbf8cf9 BUG: 1313131 Original author: Raghavendra Bhat <raghavendra@redhat.com> Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/13472 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> (cherry picked from commit 2102010edab355ac9882eea41a46edaca8b9d02c) Reviewed-on: http://review.gluster.org/13552 Tested-by: Venky Shankar <vshankar@redhat.com>
* geo-rep: Mask xtime and stime xattrsKotresh HR2016-03-071-1/+18
| | | | | | | | | | | | | | | | | | | | | | | Allow access to xtime and stime xattrs only to gsyncd client and mask them for the rest. This is to prevent afr from performing self healing on marker xtime and geo-rep stime xattr which is not expected as each of which gets updated them from backend brick and should not be healed. BUG: 1313623 Change-Id: I9b4b3ce30bbc09d300e6d5c6782e2446f2411c6f Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/13242 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Vijaikumar Mallikarjuna <vmallika@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/13572 Reviewed-by: Aravinda VK <avishwan@redhat.com>
* features/trash: Retain file permissions during truncateAnoop C S2016-03-051-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Consider the situation where directory path for a truncated file does not exists under trash directory. In this scenario after creating the required path we failed to create the orginal file with proper permissions. Eventhough we try to fetch permissions from local->origpath, it was never filled with required value in truncate and ftruncate call paths. This change will copy original location to local->origpath inside both fop handling functions. >Change-Id: If5930b6d368d08e58f04db999f3f9edb9250bcb9 >BUG: 1309342 >Signed-off-by: Anoop C S <anoopcs@redhat.com> >Reviewed-on: http://review.gluster.org/13461 >Smoke: Gluster Build System <jenkins@build.gluster.com> >CentOS-regression: Gluster Build System <jenkins@build.gluster.com> >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> >Reviewed-by: jiffin tony Thottan <jthottan@redhat.com> >Reviewed-by: Jeff Darcy <jdarcy@redhat.com> (cherry picked from commit b1cb581424305592fac5394a578b307117b22fe7) Change-Id: I5d964b4d802551bb04a7011f88edb59a1231238e BUG: 1313233 Signed-off-by: Anoop C S <anoopcs@redhat.com> Reviewed-on: http://review.gluster.org/13555 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: jiffin tony Thottan <jthottan@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* features/shard: Fix NULL-dereference when fsync failsKrutika Dhananjay2016-03-041-0/+4
| | | | | | | | | | | | | Backport of: http://review.gluster.org/#/c/13562/ Change-Id: I6a642203949227452e0f64bcffae23ade1a34fd0 BUG: 1313315 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/13563 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* cluster/ec: Mark self-heal fops as internalPranith Kumar K2016-03-043-3/+3
| | | | | | | | | | | | | | | | | | >Change-Id: I8ae7af266d3e00460f0cfdc9389a926e5f2fee36 >BUG: 1282761 >Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> >Reviewed-on: http://review.gluster.org/12598 >Tested-by: Gluster Build System <jenkins@build.gluster.com> >Tested-by: NetBSD Build System <jenkins@build.gluster.org> >Reviewed-by: Xavier Hernandez <xhernandez@datalab.es> BUG: 1283757 Change-Id: Ic20d4ee031265305db1a6ed2cf591ce94b7d0749 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/12668 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* locks: Handle negative values for flock->l_lenSoumya Koduri2016-02-281-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | As per 'man 3 fcntl', "If l_len is positive, the area affected shall start at l_start and end at l_start+l_len−1. If l_len is negative, the area affected shall start at l_start+l_len and end at l_start−1. Locks may start and extend beyond the current end of a file, but shall not extend before the beginning of the file." Currently we return EINVAL if l_len is found to be negative. Fixed the same as mentioned in the man page. This is backport of the below patch - http://review.gluster.org/11613 Change-Id: I493ce202c543185fc4ae7266d1aaf9d7e2a66991 BUG: 1312200 Signed-off-by: Soumya Koduri <skoduri@redhat.com> Reviewed-on: http://review.gluster.org/11613 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/13526 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* snapview-client: remove check for parent inode typeMohammed Rafi KC2016-02-221-26/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | In lookup call back path, we are checking for parent inode type to make sure parent inode was set properly, so that next op on the inode can be successfuly completed. More info can be found at bugid 1297311 Back port of> >Change-Id: Ifb1b17f472f855f9b12088c3dd8328389d895e77 >BUG: 1297311 >Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> >Reviewed-on: http://review.gluster.org/13227 >Reviewed-by: Avra Sengupta <asengupt@redhat.com> >Tested-by: NetBSD Build System <jenkins@build.gluster.org> >Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Change-Id: I347aa0e42ae35491246747dee50724fc91964611 BUG: 1306131 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/13412 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* USS: pre-existing .snaps should not be listed with 'ls -a' with USSvmallika2016-02-151-13/+66
| | | | | | | | | | | | | | | | | | | | | | enabled This is a backport of http://review.gluster.org/#/c/13330/ If there is a .snaps directory pre-exists and when USS is enabled, it should not be listed with 'ls -a' > Change-Id: I1c43e2decc0bbbd3213b190b675e3a32d04b22d3 > BUG: 1303828 > Signed-off-by: vmallika <vmallika@redhat.com> Change-Id: I76c632239b45f7eb7296cbfe3b73bc68e5bd1655 BUG: 1306163 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/13419 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* quota: Fix incorrect disk usage shown on a tiered volumeManikandan Selvaganesh2016-02-101-4/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | When quota is enabled on a tiered volume, incorrect data usage is shown, it is because, during the process of migrating files in tiering, we are accounting both for the src file and dst file at some point. By the time we make the srcfile as a T file, marker has already accounted the contri and has updated it's parent and also we are not accounting for the truncate operation done, which accounts to incorrect data usage even after unlinking the file. The size can increase drastically with multiple promotes and demotes since the contri keeps changing and the parent is being updated. Backport of http://review.gluster.org/#/c/13363/ > Change-Id: Ie567228786713d7dc257ff374a69ad3be40f9e82 > BUG: 1304970 > Signed-off-by: Manikandan Selvaganesh <mselvaga@redhat.com> Change-Id: I72138aa3bb9ad180287e9bed916b845ec028f259 BUG: 1305029 Signed-off-by: Manikandan Selvaganesh <mselvaga@redhat.com> Reviewed-on: http://review.gluster.org/13388 Reviewed-by: Vijaikumar Mallikarjuna <vmallika@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* features/shard: Implement zerofill FOPKrutika Dhananjay2016-02-101-18/+35
| | | | | | | | | | | | | | Backport of: http://review.gluster.org/13234 Change-Id: I5ef61285dbe3ff218e50b8a272c88227c30c35c6 BUG: 1299712 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/13287 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* marker : handle variable `ret` properly in marker_unlink_cbkjiffin tony thottan2016-02-021-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/#/c/12584/ While compiling new source, the following issue got hit : marker.c: In function 'marker_unlink_cbk': marker.c:994:29: warning: variable 'ret' set but not used int32_t ret = 0; This patch will fix the same. Upstream reference : cherry picked from commit eada31c88f929768df5fa337137b2ffcd57f2e73 >Change-Id: I0de60bed3351b3aa1cc80f52d178e447826210e7 >BUG: 1257694 >Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> >Reviewed-on: http://review.gluster.org/12584 >Reviewed-by: Vijaikumar Mallikarjuna <vmallika@redhat.com> >Tested-by: NetBSD Build System <jenkins@build.gluster.org> >Tested-by: Gluster Build System <jenkins@build.gluster.com> >Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Change-Id: Ia8f87131e90599cad018cd31269de68049a2ade9 BUG: 1279331 Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> Reviewed-on: http://review.gluster.org/12596 Reviewed-by: Manikandan Selvaganesh <mselvaga@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* features / bitrot: Prevent spurious pthread_cond_wait() wakeupVenky Shankar2016-01-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/13302 pthread_cond_wait() is prone to spurious wakeups and it's utmost necessarry to check a boolean predicate for thread continuation. See man(3) pthread_cond_wait() for details. The following is done in bitrot scrubber: if (list_empty (&fsscrub->scrublist)) pthread_cond_wait (&fsscrub->cond, &fsscrub->mutex); followed by: list_first_entry (&fsscrub->scrublist, ...) A spurious wakeup from pthread_cond_wait() with the absence of list_empty() check causes list_first_entry() to return garbage. BUG: 1302199 Change-Id: I60151eabb8af257a35acd8e7c117876388166a0e Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/13307 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* features/bitrot: Fail node-uuid getxattr if file is marked badKotresh HR2016-01-271-0/+22
| | | | | | | | | | | | | | | | | | | | | If xattr is node-uuid and the inode is marked bad, fail getxattr and fgetxattr with EIO. Returning EIO would result in AFR to choose correct node-uuid coresponding to the subvolume where the good copy of the file resides. BUG: 1296795 Change-Id: I3f8dc807794f9a82867807e7c4c73ded6c64fd8a Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/13116 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/13194 Tested-by: Venky Shankar <vshankar@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* features/bitrot: add check for corrupted object in f{stat}Venky Shankar2016-01-261-32/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/13120 Check for corrupted objects is done bt bitrot stub component for data operations and such fops are denied processing by returning EIO. These checks were not done for operations such as get/set extended attribute, stat and the likes - IOW, stub only blocked pure data operations. However, its necessary to have these checks for certain other fops, most importantly stat (and fstat). This is due to the fact that clients could possibly get stale stat information (such as size, {a,c,m}time) resulting in incorrect operation of the application that rely on these fields. Note that, the data that replication would take care of fetching good (and correct) data, but the staleness of stat information could lead to data inconsistencies (e.g., rebalance, tier). Change-Id: I5a22780373b182a13f8d2c4ca6b7d9aa0ffbfca3 BUG: 1297213 Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/13276 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* quota: limit xattr for subdir not healed on newly added bricksvmallika2016-01-251-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | This is a backport of http://review.gluster.org/#/c/13100/ DHT after creating missing directory, tries to heal the xattrs. This xattrs operation fails as INTERNAL FOP key was not set > Change-Id: I819d373cf7073da014143d9ada908228ddcd140c > BUG: 1294479 > Signed-off-by: vmallika <vmallika@redhat.com> Change-Id: I30345e919bc9ae882fd0e159c7b03ffc50ed5ef7 BUG: 1294608 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/13108 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* features/shard: Implement fallocate FOPKrutika Dhananjay2016-01-212-179/+329
| | | | | | | | | | | | | | | Backport of: http://review.gluster.org/13196 Change-Id: Iab0c41319af42210c871a3ed6cf52a987c5d88d7 BUG: 1299712 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/13259 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* afr: handle bad objects during lookup/inode_refreshRavishankar N2016-01-211-0/+57
| | | | | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/12955, http://review.gluster.org/#/c/13077/ and http://review.gluster.org/#/c/13185/ If an object (file) is marked bad by bitrot, do not consider the brick on which the object is present as a potential read subvolume for AFR irrespective of the pending xattr values. Also do not consider the brick containing the bad object while performing afr_accuse_smallfiles(). Otherwise if the bad object's size is bigger,we may end up considering that as the source. Change-Id: I4abc68e51e5c43c5adfa56e1c00b46db22c88cf7 BUG: 1293300 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/13041 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* all: reduce "inline" usageKaleb S KEITHLEY2016-01-1819-152/+91
| | | | | | | | | | | | | | | | | | | | | | | | | | There are three kinds of inline functions: plain inline, extern inline, and static inline. All three have been removed from .c files, except those in "contrib" which aren't our problem. Inlines in .h files, which are overwhelmingly "static inline" already, have generally been left alone. Over time we should be able to "lower" these into .c files, but that has to be done in a case-by-case fashion requiring more manual effort. This part was easy to do automatically without (as far as I can tell) any ill effect. In the process, several pieces of dead code were flagged by the compiler, and were removed. backport of Change-Id: I56a5e614735c9e0a6ee420dab949eac22e25c155, http://review.gluster.org/11769, BUG: 1245331 Change-Id: Iba1efb0bc578ea4a5e9bf76b7bd93dc1be9eba44 BUG: 1283302 Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/12646 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* features/bit-rot-stub: delete the link for bad object in quarantine directoryRaghavendra Bhat2016-01-094-2/+95
| | | | | | | | | | | | | | | | | | | | When the bad object is deleted (as of now manually from the backend itself), along with its gfid handle, the entry for the bad object in the quarantne directory is left as it is (it also can be removed manually though). But the next lookup of the object upon not finding it in the backend, sends forget on the in-memory inode. If the stale link for the gfid still exists in the quarantine directory, bir-rot-stub will unlink the entry in its forget or in the next failed lookup on that object with errno being ENOENT. Change-Id: If84292d3e44707dfa11fa29023b3d9f691b8f0f3 BUG: 1293584 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/12743 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> (cherry picked from commit f853ed9c61bf65cb39f859470a8ffe8973818868) Reviewed-on: http://review.gluster.org/13032
* quota: handle quota xattr removal when quota is enabled againvmallika2016-01-071-4/+23
| | | | | | | | | | | | | | | | | | | | | | | This is a backport of http://review.gluster.org/#/c/13065/ When a quota is disable and enabled again before completing the cleanup operation, this can remove the new xattrs and quota accounting can become wrong Remove removing the xattr, check if quota enabled again and the xattr is new > Change-Id: Idda216f1e7346a9b843dbc112ea3e6faa9c47483 > BUG: 1293601 > Signed-off-by: vmallika <vmallika@redhat.com> Change-Id: Ia9e3002229427f811d6a35eabf21541f4fa057af BUG: 1294609 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/13109 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* libgfchangelog: Allocate logbuf_pool in master xlatorKotresh HR2015-12-301-0/+4
| | | | | | | | | | | | | | | The master xlator needs to allocate 'logbuf_pool' else 'gf_msg' fails with EINVAL. BUG: 1293595 Change-Id: I51a1895b5ff9c8eaf6cc15a9cacc415fa8cd7bdd Reviewed-on: http://review.gluster.org/12997 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/13064 Reviewed-by: Aravinda VK <avishwan@redhat.com>
* afr: refresh inode using fstatRavishankar N2015-12-281-12/+53
| | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/12894 For fd based operations (fgetxattr, readv etc.) if an inode refresh is required, do so using fstat instead of lookup. This is because the file might have been deleted by another client before refresh but posix mandates that FOPS using already open fds must still succeed. Change-Id: Id5f71c3af4892b648eb747f363dffe6208e7ac09 BUG: 1290363 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/13040 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* ctr/sql: Providing for vol set for sqlcachesize and sqlWALsize and skip ↵Joseph Fernandes2015-12-223-29/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | recording path 1. Providing vol set option for cache size and wal autocheck point so that performance can be tuned. 2. Removed recording of file path in the db. Trimming database columns. Path need not be stored in the db, as PARGFID, GFID, Basename is suffice to derive the path during migration. Backport of http://review.gluster.org/12972 > Change-Id: I2cb590451a6d244bc91fe66c6dbffe2c2059dfb8 > BUG: 1293034 > Signed-off-by: Joseph Fernandes <josferna@redhat.com> > Reviewed-on: http://review.gluster.org/12972 > Reviewed-by: N Balachandran <nbalacha@redhat.com> > Tested-by: Gluster Build System <jenkins@build.gluster.com> > Tested-by: NetBSD Build System <jenkins@build.gluster.org> > Reviewed-by: Dan Lambright <dlambrig@redhat.com> > Tested-by: Dan Lambright <dlambrig@redhat.com> Signed-off-by: Joseph Fernandes <josferna@redhat.com> Change-Id: Ia1c109983ec6ce75ed27b8c08f454f5b6283c31d BUG: 1293659 Reviewed-on: http://review.gluster.org/13067 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Tested-by: Dan Lambright <dlambrig@redhat.com>
* features/index : Prevent logging due to NULL dictAnuradha Talur2015-12-211-4/+4
| | | | | | | | | | | | | | | | Backport of http://review.gluster.org/12910 Added a check for non-NULLness of dict before performing dict_foreach_match on it. Change-Id: I77d83559934006425ed33745b8a244b2f5d90cb1 BUG: 1287531 Signed-off-by: Anuradha Talur <atalur@redhat.com> Reviewed-on: http://review.gluster.org/12910 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/12971
* heal : Changed heal info to process all indices directoriesAnuradha Talur2015-12-211-4/+1
| | | | | | | | | | | | Backport of http://review.gluster.org/#/c/12658/ Change-Id: Ida863844e14309b6526c1b8434273fbf05c410d2 BUG: 1287531 Signed-off-by: Anuradha Talur <atalur@redhat.com> Reviewed-on: http://review.gluster.org/12854 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* features/index : Readdirp performance improvementAnuradha Talur2015-12-212-96/+504
| | | | | | | | | | | | | | | | | | | | | | | | | Backport of: http://review.gluster.org/#/c/12468 Things done : Index now maintains two different directories : 1) for pending xattrs (trusted.afr.volname-client-n, trusted.ec.dirty) 2) for on going xattrs (trusted.afr.dirty) Based on the xattr, index decides the directory to add/del entry in/from. Change-Id: Ie04c02ea2d862cf80426a871a9a1e80b0773d9fd BUG: 1287531 Signed-off-by: Anuradha Talur <atalur@redhat.com> Reviewed-on: http://review.gluster.org/12468 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Signed-off-by: Anuradha Talur <atalur@redhat.com> Reviewed-on: http://review.gluster.org/12852 Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com>
* bitrot: getting correct value of scrub stat'sGaurav Kumar Garg2015-12-173-20/+187
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is backport of: http://review.gluster.org/#/c/12776/ When user execute bitrot scrub status command then gluster is not giving correct value of Number of Scrubbed files, Number of Unsigned files, Last completed scrub time, Duration of last scrub. With this patch scrub status will give correct value for all the above fields. >> Change-Id: Ic966f76d22db5b0c889e6386a1c2219afbda1f49 >> BUG: 1285989 >> Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> >> Signed-off-by: Kotresh HR <khiremat@redhat.com> >> Reviewed-on: http://review.gluster.org/12776 >> Tested-by: NetBSD Build System <jenkins@build.gluster.org> >> Tested-by: Gluster Build System <jenkins@build.gluster.com> >> Reviewed-by: Venky Shankar <vshankar@redhat.com> Change-Id: Ic966f76d22db5b0c889e6386a1c2219afbda1f49 BUG: 1291546 Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> (cherry picked from commit 22827d51c232c44a8f5ac003529d907d93baf7b0) Change-Id: Icef24cce35c8d54ffdfa5282491338318e78780b Reviewed-on: http://review.gluster.org/12966 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* tier/ctr: Check filename in ctr_lookup for nameless lookupJoseph Fernandes2015-12-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | Check filename in ctr_lookup for nameless lookup Backport of http://review.gluster.org/12760 > Change-Id: I1ab3f658e3b9fee708f6986d1990f16db920d2fb > BUG: 1285663 > Signed-off-by: Joseph Fernandes <josferna@redhat.com> > Reviewed-on: http://review.gluster.org/12760 > Tested-by: Gluster Build System <jenkins@build.gluster.com> > Reviewed-by: Dan Lambright <dlambrig@redhat.com> > Tested-by: Dan Lambright <dlambrig@redhat.com> Signed-off-by: Joseph Fernandes <josferna@redhat.com> Change-Id: I2dccf8fe556c42623dc0aa89459dd2aa2a038380 BUG: 1290295 Reviewed-on: http://review.gluster.org/12935 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Tested-by: Dan Lambright <dlambrig@redhat.com>
* features/shard: Do not update inode-ctx size (again) after xattropKrutika Dhananjay2015-12-081-2/+4
| | | | | | | | | | | | | | | | | Backport of: http://review.gluster.org/#/c/12907/ This is to fix race between parallel writevs that could mess up the file size value in inode ctx. Thanks to Pranith for helping with RCA'ing the issue. Change-Id: I8e26d92568434bc6c60b0c23089532bf3bdac509 BUG: 1289570 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/12911 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* quota: add 'quota-version' to xlator volume_options structurevmallika2015-12-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | This is a backport of http://review.gluster.org/#/c/12878/ Below error is seen in brick log: 0-vol1-quota: option 'quota-version' is not recognized So add this option to the volume_options structure of marker xlator > Change-Id: I1bd68a537936ee0f9af85dac74f1377f84edb8f4 > BUG: 1283178 > Signed-off-by: vmallika <vmallika@redhat.com> Change-Id: I108cfa2cb829daad9aca80cbd630b9afab0b05a7 BUG: 1283187 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/12879 Reviewed-by: Manikandan Selvaganesh <mselvaga@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* Upcall: Read gfid from iatt in case of invalid inodeSoumya Koduri2015-12-033-22/+38
| | | | | | | | | | | | | | | | | | | | When any file/dir is looked upon for the first time, inode created shall be invalid till it gets linked to the inode table. In such cases, read the gfid from the iatt structure returned as part of such fops for UPCALL processing. This is backport of the below patch - http://review.gluster.org/12773 Change-Id: Ie5eb2f3be18c34cf7ef172e126c9db5ef7a8512b BUG: 1287079 Signed-off-by: Soumya Koduri <skoduri@redhat.com> Reviewed-on: http://review.gluster.org/12773 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/12839 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* tier/glusterd : Validation for frequency thresholds and record-countersJoseph Fernandes2015-12-023-18/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1) if record-counters is set to off check if both the frequency thresholds are non-zero, then pop an error message, with volume set failed. 2) if record-counters is set to on check if both the frequency thresholds are zero, then pop an note, but volume set is not failed. 3) If any of the frequency thresholds are set to a non-zero value, switch record-counters on, if not already on 4) If both the frequency thresholds are set to zero, switch record-counters off, if not already off NOTE: In this fix we have 1) removed unnecessary ctr vol set options. 2) changed ctr_hardlink_heal_expire_period to ctr_lookupheal_link_timeout Backport of http://review.gluster.org/12780 > Change-Id: Ie7ccfd3f6e021056905a79de5a3d8f199312f315 > BUG: 1286346 > Signed-off-by: Joseph Fernandes <josferna@redhat.com> > Signed-off-by: Dan Lambright <dlambrig@redhat.com> > Reviewed-on: http://review.gluster.org/12780 > Tested-by: Gluster Build System <jenkins@build.gluster.com> > Tested-by: NetBSD Build System <jenkins@build.gluster.org> > Signed-off-by: Joseph Fernandes <josferna@redhat.com> Change-Id: I35621ed3cc1ad20a75ef16e0b95453b8c6120852 BUG: 1287560 Signed-off-by: Joseph Fernandes <josferna@redhat.com> Reviewed-on: http://review.gluster.org/12849 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Tested-by: Dan Lambright <dlambrig@redhat.com>
generated by cgit (git 2.34.1) at 2024-06-03 10:24:23 +0000