summaryrefslogtreecommitdiffstats
path: root/xlators/features/changelog/src
Commit message (Collapse)AuthorAgeFilesLines
* features/changelog: Avoid setattr fop logging during renameSaravanakumar Arumugam2015-06-111-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: When a file is renamed and the (renamed)file's Hashing falls into a different brick, DHT creates a special file(linkto file) in the brick(Hashed subvolume) and carries out setattr operation on that file. Currently, Changelog records this(setattr) operation in Hashed subvolume. glusterfind in turn records this operation as MODIFY operation. So, there is a NEW entry in Cached subvolume and MODIFY entry in Hashed subvolume for the same file. Solution: Avoid logging setattr operation carried out, by marking the operation as internal fop using xdata. In changelog translator, check whether setattr is set as internal fop and skip accordingly. Change-Id: I21b09afb5a638b88a4ccb822442216680b7b74fd BUG: 1230687 Signed-off-by: Saravanakumar Arumugam <sarumuga@redhat.com> Reviewed-on: http://review.gluster.org/11183 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com>
* features/changelog: Remove inline keyword to avoid warnings (gcc v5.1.1)v3.7.1Anoop C S2015-06-013-13/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/11004 When compiled with gcc5, following warnings were displayed and volume start failed: changelog-helpers.h:499:1: warning: inline function 'changelog_dispatch_event' declared but never defined changelog_dispatch_event (xlator_t *, changelog_priv_t *, changelog_event_t *); gf-changelog-journal-handler.c:692:17: warning: 'list_add_tail' is static but used in inline function 'gf_changelog_queue_journal' which is not static list_add_tail (&entry->list, &jnl_proc->entries); Fix is to remove the keyword from function prototype and definitions. Change-Id: I188b35b7ca087a94d7a48a052b05a6d845e3b74b BUG: 1226853 Signed-off-by: Anoop C S <achiraya@redhat.com> Reviewed-on: http://review.gluster.org/11030 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* featuress/changelog: On snapshot, notify irrespective of failuresKotresh HR2015-05-313-23/+33
| | | | | | | | | | | | | | | | | | | | During snapshot, changelog barrier is enabled and a explicit rollover of changelog is initiated. During rollover of changelog, if any error or changelog is empty, the notification was not sent to reconfigure and hence snapshot was failing because of timeout. This patch addresses it by sending notification irrespective of failures and sends error if any back to barrier. BUG: 1225543 Change-Id: I971ef3bdc63bb50bda0b655e55cd814e44254ba9 Reviewed-On: http://review.gluster.org/10951 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/10988 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* geo-rep: rename handling in dht volume(changelog changes)Saravanakumar Arumugam2015-05-091-38/+77
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Background: Glusterfs changelogs are stored in each brick, which records the changes happened in that brick. Georep will run in all the nodes of master and processes changelogs "independently". Processing changelogs is in brick level, but all the fops will be replayed on "slave mount" point. Problem: With a DHT volume, in changelog "internal fops" are NOT recorded. For Rename case, Rename is recorded in "hashed" brick changelog. (DHT's internal fops like creating linkto file, unlink is NOT recorded). This lead us to inconsistent rename operations. For example, Distribute volume created with Two bricks B1, B2. //Consider master volume mounted @ /mnt/master and following operations executed: cd /mnt/master touch f1 // f1 falls on B1 Hash mv f1 f2 // f2 falls on B2 Hash // Here, Changelogs are recorded as below: @B1 CREATE f1 @B2 RENAME f1 f2 Here, race exists between Brick B1 and B2, say B2 will get executed first. Source file f1 itself is "NOT PRESENT", so it will go ahead and create f2 (Current implementation). We have this problem When rename falls in another brick and file is unlinked in Master. Similar kind of issue exists in following case too(multiple rename): CREATE f1 RENAME f1 f2 RENAME f2 f1 Solution: Instead of carrying out "changelogging" at "HASHED volume", carry out at the "CACHED volume". This way we have rename operations carried out where actual files are present. So,Changelog recorded as : @B1 CREATE f1 RENAME f1 f2 Note: This patch is dependent on dht changes from this patch. http://review.gluster.org/10410/ changelog related changes are separated out for review. In changelog, xdata passed from DHT is considered as: 1. In case of unlink (internal operation as part of rename), xdata value is set , it is considered as RENAME and recorded accordingly. 2. In case of rename (Hash and Cache different), xdata value is NOT set, recording rename operation is SKIPPED. BUG: 1219412 Change-Id: I7691166c84991482b2cfe073df64e2317c935b13 Reviewed-On: http://review.gluster.org/#/c/10220/ Signed-off-by: Saravanakumar Arumugam <sarumuga@redhat.com> Reviewed-on: http://review.gluster.org/10633 Reviewed-by: Aravinda VK <avishwan@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* features/changelog: Fix buffer overflow in snprintfKotresh HR2015-05-081-8/+8
| | | | | | | | | | BUG: 1219823 Change-Id: I3a1c7b7742671847ed3fec13e06d861c3d09f7a9 Reviewed-On: http://review.gluster.org/#/c/10687/ Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/10688 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Aravinda VK <avishwan@redhat.com>
* features/changelog: Fixing compilation issueAravinda VK2015-05-082-2/+5
| | | | | | | | | | | | | This issue introduced due to manual rebase. Change-Id: I0589f4a0a1270190340f419b8022d6483bcf853d Signed-off-by: Aravinda VK <avishwan@redhat.com> BUG: 1219479 Reviewed-on: http://review.gluster.org/10685 Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/10686
* features/changelog: Avoid creation of empty changelogsSaravanakumar Arumugam2015-05-082-16/+116
| | | | | | | | | | | | | | | | | An empty changelog when rolled over gets unlinked and indexed with a modified path-name in htime file. The modification is "changelog" not "CHANGELOG" in basename of the empty changelog file. BUG: 1219479 Change-Id: Ib5b825ab563fa34d8dcf4368cf6cbf4b25d78a6d Original-Author: Ajeet Jha <ajha@redhat.com> Original-Author: Saravanakumar Arumugam <sarumuga@redhat.com> Reviewed-On: http://review.gluster.org/#/c/9572/ Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/10642 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Aravinda VK <avishwan@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* features/changelog: Version support for Changelog ParserAravinda VK2015-05-081-2/+4
| | | | | | | | | | | | | | | | | | As optional feature, during unlink, full path will be recorded. Changelog Version number to be bumped up to 1.2. With this patch, parser checks the version number before parsing and handles accordingly. Change-Id: Ic1ad98259c39e417029a08e26a1d4b467817e65a BUG: 1218383 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/10166 Reviewed-on: http://review.gluster.org/10620 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Saravanakumar Arumugam <sarumuga@redhat.com> Tested-by: NetBSD Build System Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* changelog: Fixing buffer overrun coverity issues.Nandaja Varma2015-05-072-7/+7
| | | | | | | | | | | | | | | | | | | | | | Coverity IDs: 1214630 1214631 1214633 1234643 Backport of: http://review.gluster.org/9557 Change-Id: I172c4f49bf651b2324522f9e661023f73ca05339 BUG: 789278 Signed-off-by: Nandaja Varma <nvarma@redhat.com> Reviewed-on: http://review.gluster.org/9557 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Sakshi Bansal Reviewed-by: Venky Shankar <vshankar@redhat.com> (cherry picked from commit 7d7b80efe8c745f3ff7de76fc31c4977098cae01) Reviewed-on: http://review.gluster.org/10595 Tested-by: NetBSD Build System Tested-by: Venky Shankar <vshankar@redhat.com>
* rpc: Maintain separate xlator pointer in 'rpcsvc_state'Kotresh HR2015-05-052-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The structure 'rpcsvc_state', which maintains rpc server state had no separate pointer to track the translator. It was using the mydata pointer itself. So callers were forced to send xlator pointer as mydata which is opaque (void pointer) by function prototype. 'rpcsvc_register_init' is setting svc->mydata with xlator pointer. 'rpcsvc_register_notify' is overwriting svc->mydata with mydata pointer. And rpc interprets svc->mydata as xlator pointer internally. If someone passes non xlator structure pointer to rpcsvc_register_notify as libgfchangelog currently does, it might corrupt mydata. So interpreting opaque mydata as xlator pointer is incorrect as it is caller's choice to send mydata as any type of data to 'rpcsvc_register_notify'. Maintaining two different pointers in 'rpcsvc_state' for xlator and mydata solves the issue. BUG: 1218381 Change-Id: I4c28937a30845e3f41b6fc7a09036149c816659b Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/10366 Reviewed-on: http://review.gluster.org/10534 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System Reviewed-by: Aravinda VK <avishwan@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* feature/changelog: Capture path for deletesKotresh HR2015-05-056-5/+188
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PROBLEM: There is no way to get the path of deleted file if we have gfid from changelog since the file is already deleted. SOLUTION: Do a recursive readlink on parent gfid in backend .glusterfs path to get the complete path in I/O callpath in changelog translator and capture it in callback. The path captured is relative from the brick root. The field separator used is '\0'. e.g., ......\0<pgfid>/bname\0<relative-path>\0<next-record> ADDITIONAL REQUIRED CHANGES: 1. The changelog translator option called "changelog.capture-del-path" is introduced to enable or disable the capturing of deleted entry path. e.g., gluster vol set <vol-name> changelog.capture-del-path on/off If capture-del-path is disabled, '\0' is captured instead of relative path. e.g., ......\0<pgfid>/bname\0\0\0<next-record> 2. The minor number in the version of changelog is bumped up from v1.1 to v1.2. 3. If recursive readlink is failed for some reason, it will capture \0 in place of <relative path>. e.g., ......\0<pgfid>/bname\0\0\0<next-record> (same as when caputre-del-path option is disabled) 4. If bname argument passed to "resolve_pargfid_to_path" function is NULL and pargfid is ROOT, "." is returned. This is not the case with changelog, where bname is always passed. This is applicable to other consumers of "resolve_pargfid_to_path" routine. NOTE: Changelog parser should consider the above new changes and should parse accordingly. BUG: 1218383 Change-Id: I5d89cf4157befd207771f6c0248d2493fbf85832 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/10288 Reviewed-on: http://review.gluster.org/10535 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System Reviewed-by: Aravinda VK <avishwan@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* features/changelog: Consider only changelog on/off as changelog breakageKotresh HR2015-05-054-11/+211
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Earlier, both chagelog on/off and brick restart were considered to be changelog breakage and treated as changelog not being continuous. As a result, new HTIME.TSTAMP file was created on both the above cases. Now the change is made such that only on changelog enable/disable, the changelog is considered to be discontinuous. New HTIME.TSTAMP file is not created on brick restart, the changelogs files are appended to last HTIME.TSTAMP file. Treating changelog as continuous in above scenario is important as changelog history API will fail otherwise. It can successfully get changes between start and end timestamps only when changelog is continuous (Changelogs in single HTIME.TSTAMP file are treated as continuous). Without this change, changelog history API would fail, and it would become necessary to fallback to other mechanisms like xsync FSCrawl in case geo-rep to detect changes in this time window. But Xsync FSCrawl would not be applicable to other consumers like glusterfind. Rationale: 1. In plain distributed volume, if brick goes down, no I/O can happen onto the brick. Hence changelog is intact with data on disk. 2. In distributed replicate volume, if brick goes down, since self-heal traffic is captured in changelog. Eventually, I/O happened whend brick down is captured in changelog. BUG: 1217944 Change-Id: Ifa6d932818fe1a3a914e87ac84f1d2ded01c1288 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/10222 Reviewed-on: http://review.gluster.org/10507 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Aravinda VK <avishwan@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* features/bit-rot: Mark versioning fsetxattr as internal fopKotresh HR2015-04-111-0/+1
| | | | | | | | | | | | | | | | | Changelog xlator was capturing bitrot-stub's fsetxattr sent for versioning. Since it was using the same frame as of the create fop, there was inconsistency in fop number and gfid of capturing metadata. So fix is to mark fsetxattr used for versioning as internal and add internal fop filter in changelog_fsetxattr. Change-Id: I51ff468995139838b22bf293a59a0713a92ee7a5 BUG: 1170075 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/10148 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* Avoid conflict between contrib/uuid and system uuidEmmanuel Dreyfus2015-04-043-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | glusterfs relies on Linux uuid implementation, which API is incompatible with most other systems's uuid. As a result, libglusterfs has to embed contrib/uuid, which is the Linux implementation, on non Linux systems. This implementation is incompatible with systtem's built in, but the symbols have the same names. Usually this is not a problem because when we link with -lglusterfs, libc's symbols are trumped. However there is a problem when a program not linked with -lglusterfs will dlopen() glusterfs component. In such a case, libc's uuid implementation is already loaded in the calling program, and it will be used instead of libglusterfs's implementation, causing crashes. A possible workaround is to use pre-load libglusterfs in the calling program (using LD_PRELOAD on NetBSD for instance), but such a mechanism is not portable, nor is it flexible. A much better approach is to rename libglusterfs's uuid_* functions to gf_uuid_* to avoid any possible conflict. This is what this change attempts. BUG: 1206587 Change-Id: I9ccd3e13afed1c7fc18508e92c7beb0f5d49f31a Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/10017 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* Xlators : Fixed typosManikandan Selvaganesh2015-04-021-0/+3
| | | | | | | | | | | Change-Id: I948f85cb369206ee8ce8b8cd5e48cae9adb971c9 BUG: 1075417 Signed-off-by: Manikandan Selvaganesh <mselvaga@redhat.com> Reviewed-on: http://review.gluster.org/9529 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com>
* features/changelog: Fixing Deference after null checkarao2015-03-311-1/+1
| | | | | | | | | | | | | | | CID: 1124481 The goto label 'out' was trying to dereference a pointer which might be null, hence a check on not null is made before the use of it. Change-Id: I813e523207b8218a7a28c2b3ac36a8e472e36c89 BUG: 789278 Signed-off-by: arao <arao@redhat.com> Reviewed-on: http://review.gluster.org/9617 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* changelog xlator: avoid unsupported threaded event-poll usageEmmanuel Dreyfus2015-03-301-10/+5
| | | | | | | | | | | | | | | | | | | | | The changelog xlator was modified to use a poller thread, which uses the same event pool as the xlator stack. Unfortunately, such threaded usage of event pool is not supported by event-poll code, only event-epoll supports it. As a result, platforms such as NetBSD that lack epoll support got broken. The fix is to remove the poller thread, which does not cause any functionnality loss because the xlator stack event poll is functionnal. That lets NetBSD pass AFR tests again. BUG: 1129939 Change-Id: I3d73cf58e2ed8d92d9e0191f7abda3c37dea4159 Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/10030 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* features/changelog: Make use of IPC fopVenky Shankar2015-03-241-0/+46
| | | | | | | | | | | | | Translators which wish to send event notifications can send "down" an IPC FOP with op_type as GF_IPC_TARGET_CHANGELOG and xdata carrying event structures (changelog_event_t). Change-Id: I0e5f8c9170161c186f0e58d07105813e34e18786 BUG: 1170075 Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/9775 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* features/changelog: RPC'fy {libgf}changelogVenky Shankar2015-03-1815-605/+1846
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces RPC based communication between the changelog translator and libgfchangelog. It replaces the old pathetic stream based interaction that existed earlier (due to time constraints :-/). Changelog, upon initialization starts a RPC server (rpcsvc) allowing clients to invoke a probe API as a bootup mechanism to request for event notifications. During probe, clients can choose an event filter specifying the type(s) of events they are interested in. As of now there is no way to change the event notification set once the probe RPC call is made, but that is easier to implement. The actual event notifications is done on a separate RPC session. The client (libgfchangelog) itself starts and RPC server which the changelog translator "connects back" during probe. Notifications are dispatched by a bunch of threads from the server (translator) and the client optionally orders them if ordered notifications are requried. FOPs fill in their respective event details in a buffer (rot-buffs to be particular) and a bunch of threads (consumers) swap the buffers out of roatation and dispatch them via RPC. To avoid writer starvation, then number of dispatcher threads is one less than the number of buffer list in rot-buffs.x libgfchangelog becomes purely callback based -- upon event notification from the server (and re-ordering them if required) invoke a callback routine specified by consumer(s). A major part of the patch is also aimed at providing backward compatibility for geo-replication, which was one of the main consumer of the stream based API. Also, this patch does not\ "turn on" event notifications for all fops, just a bunch which is currently in requirement. Another pain point is that the server does not filter events before dispatching it to the clients. That load is taken up by the client itself (although it's done at the library layer rather than making it hard on the callback implementor). This needs improvement and care needs to be taken to not load the server up with expensive filtering mechanisms. Change-Id: Ibf60a432b68f2dfa60c6f9add2bcfd37a9c41395 BUG: 1170075 Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/9708 Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* feature/changelog: Logging entry as well for explicit sync virtual xattr.Kotresh HR2015-01-093-7/+135
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This is an improvement over the patch 'http://review.gluster.org/9337' to trigger explicit geo-rep sync on regular files even if entry is not present on the slave. An attempt is made to find the pargfid and if available captures CREATE along with DATA in changelog. CREATE is captured with default file permissions. Setting this virtual setxattr on directories captures MKDIR in changelog. The value of setxattr can be as follows. If value = "1" : Both CREATE and DATA is captured in changelog if pargfid is available, else on DATA is captured. value = "any other: ENOTSUP is returned. Usage: setfattr -n glusterfs.geo-rep.trigger-sync -v "1" <file-path> NOTE: This patch supports explicit record of entries only for directories and regular files. Change-Id: Iedde8b2c8bc3b78db524050d8c866ff664811d01 BUG: 1176934 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/9370 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* feature/changelog: Virtual xattr to trigger explicit sync in geo-rep.Kotresh HR2014-12-291-0/+11
| | | | | | | | | | | | | | | | | | | A virtual xattr "glusterfs.geo-rep.trigger-sync" is provided in glusterfs through changelog translator. Geo-rep triggers a explicit data sync on setting this xattr on a file. Changelog captures a DATA entry on file's gfid on setting this virtual xattr on a file. This is supported only for files. It doesn't support directories. Usage: setfattr -n glusterfs.geo-rep.trigger-sync <file-path> Change-Id: Ia689326ac2dcb31035ffbecad2c548eda4eb9245 BUG: 1176934 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/9337 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* build: FreeBSD 11-Current causes libtool to fail with '-shared'Harshavardhana2014-12-121-1/+1
| | | | | | | | | | | | Thanks for Markiyan Kushnir <markiyan.kushnir@gmail.com> for reporting this Change-Id: I7f637295c7c2d54c33a4c16e29daf0b518874911 BUG: 1111774 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/9251 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* feature/changelog: Fix changelog missing SETATTR entries.Kotresh HR2014-10-292-0/+25
| | | | | | | | | | | | | | | | | | | | | | | | | Problem: Valid SETATTR entries are missing in changelog when more than one metadata operation happen on same inode within changelog roll-over time. Cause: Metadata entries with fop num being GF_FOP_NULL are logged in changelog which is of no use. Since slice version checking is done for metadata entries to avoid logging of subsequent entries of same inode falling into same changelog, if the entry with GF_FOP_NULL is logged first, subsequent valid ones will be missed. Solution: Have a boundary condition to log only those fops whose fop number falls between GF_FOP_NULL and GF_FOP_MAXVALUE. Change-Id: Iff585ea573ac5e521a361541c6646225943f0b2d BUG: 1104954 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/8964 Reviewed-by: Aravinda VK <avishwan@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* features/changelog: Removal of redundant fop color count while draining.Ajeet Jha2014-08-261-5/+0
| | | | | | | | | Change-Id: Ie5581579df63513e636fa3dd92dd90699ea7d999 BUG: 1128093 Signed-off-by: Ajeet Jha <ajha@redhat.com> Reviewed-on: http://review.gluster.org/8542 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* features/changelog: Crash consistency of changelog wrt snapshotAjeet Jha2014-08-264-0/+232
| | | | | | | | | | | | | This patch introduces call-path fop details logging for data operations in CHANGELOG.SNAP. This feature is enabled with barrier-enable notification and disabled with barrier-disable notification. Change-Id: Ib548d34203eb99cea478a6baff402e82251c73a4 BUG: 1128093 Signed-off-by: Ajeet Jha <ajha@redhat.com> Reviewed-on: http://review.gluster.org/8533 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* features/changelog: barrier all entry creation fopsVijay Bellur2014-08-251-27/+308
| | | | | | | | | | | | | | | | | | | when a snapshot is taken, there are chances of entry creation fops not being recorded either in changelog or through the recursive ancestry xtime updation by marker. This causes consumers of changelog (primarily geo-replication as of today) to not be aware of these entries after a snapshot is restored. This can lead to inconsistencies. This patch is an interim workaround to barrier creates till changelog becomes completely crash consistent. BUG: 1128093 Change-Id: Ie0dbfd74beecb88df5c2ddf9fc680af91547c3f3 Signed-off-by: Vijay Bellur <vbellur@redhat.com> Reviewed-on: http://review.gluster.org/8517 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: ajeet jha <ajha@redhat.com> Reviewed-by: Aravinda VK <avishwan@redhat.com> Reviewed-by: Kotresh HR <khiremat@redhat.com>
* build: make GLUSTERD_WORKDIR rely on localstatedirHarshavardhana2014-08-071-2/+2
| | | | | | | | | | | | | | | | | | | | | | - Break-way from '/var/lib/glusterd' hard-coded previously, instead rely on 'configure' value from 'localstatedir' - Provide 's/lib/db' as default working directory for gluster management daemon for BSD and Darwin based installations - loff_t is really off_t on Darwin - fix-off the warnings generated by clang on FreeBSD/Darwin - Now 'tests/*' use GLUSTERD_WORKDIR a common variable for all platforms. - Define proper environment for running tests, define correct PATH and LD_LIBRARY_PATH when running tests, so that the desired version of glusterfs is used, regardless where it is installed. (Thanks to manu@netbsd.org for this additional work) Change-Id: I2339a0d9275de5939ccad3e52b535598064a35e7 BUG: 1111774 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/8246 Tested-by: Gluster Build System <jenkins@build.gluster.com>
* features/changelog: Capture "correct" internal FOPsVenky Shankar2014-07-231-5/+8
| | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes changelog capturing internal FOPs in a cascaded setup, where the intermediate master would record internal FOPs (generated by DHT on link()/rename()). This is due to I/O happening on the intermediate slave on geo-replication's auxillary mount with client-pid -1. Currently, the internal FOP capturing logic depends on client pid being non-negative and the presence of a special key in dictionary. Due to this, internal FOPs on an inter-mediate master would be recorded in the changelog. Checking client-pid being non-negative was introduced to capture AFR self-heal traffic in changelog, thereby breaking cascading setups. By coincidence, AFR self-heal daemon uses -1 as frame->root->pid thereby making is hard to differentiate b/w geo-rep's auxillary mount and self-heal daemon. Change-Id: Ib7bd71e80dd1856770391edb621ba9819cab7056 BUG: 1122037 Original-Author: Venky Shankar <vshankar@redhat.com> Signed-off-by: Kotresh H R <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/8347 Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* changelog: variable 'writen' is changedHumble Chirammal2014-07-141-5/+5
| | | | | | | | | | | | | This patch change the variable name to 'written' in changelog, along with few other typo fixing. Change-Id: I1d3cbea5c89fc0a15233bb6e61b4fbd4bfdd3a67 BUG: 1075417 Signed-off-by: Humble Chirammal <hchiramm@redhat.com> Reviewed-on: http://review.gluster.org/8267 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* features/changelog: prevent deadlock on thread cancellationVenky Shankar2014-07-111-0/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | helper threads (fsync, rollover) wake up periodically and perform their respective operation under a lock (crt->lock). These threads are also subjected to cancellation under some circumstance such as disabling changelog. This is inherently dangerous when funtions which are cancellation points for pthread_cancel(3) are used in the locked region. Consider this pthread_mutex_lock(&mutex); { /* ... */ ret = fsync (fd); <-- cancellation point /* ... */ } pthread_mutex_unlock(&mutex); A pthread_cancel(3) by another thread just before fsync(3) but after pthread_mutex_lock(3) would result in the thread getting cancelled when fsync(3) is invoked, thereby never unlocking the mutex. Moreover, in case of changelog translator, the locked region (under crt->lock in changelog-rt.c) is also the code path for fop changelog updation. Therefore, unlocking the mutex in thread cleanup handler (pthread_cleanup_pop(3)) might prematurely release the mutex during fop updation path. This patch fixes such problems existing in fsync and rollover threads. Fix is to enter the locked region with cancellation disabled and enable it after mutex unlock. Also, test for a cancellation request early on in case none of the functions are cancellation points. Change-Id: I1795627a12827609c1da659d07fc1457ffa033de BUG: 1110917 Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/8106 Reviewed-by: Kotresh HR <khiremat@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* feature/changelog: Fix for missing changelogs at backend.Kotresh H R2014-06-302-4/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: A few changelog files are missing at the backend during snapshot with changelog enabled. Cause: Race between actual rollover and explicit rollover. Changelog rollover can happen either due to actual or the explict rollover due to snapshot. Actual rollover is controlled by tuneable called rollover-time. The minimum granularity for rollover-time is 1 second Explicit rollover is asynchronous in nature and happens during snapshot. Basically, rollover renames the current CHANGELOG file to CHANGELOG.TIMESTAMP after rollover-time. Let's assume, at time 't1', actual and explicit rollover raced against each other and actual rollover won the race renaming the CHANGELOG file to CHANGELOG.t1 and opens a new CHANGELOG file. An immediate explicit rollover at time 't1' happened with in the same second to rename CHANGELOG file to CHANGELOG.t1 resulting in purging the earlier CHANGELOG.t1 file created by actual rollover. Solution: Adding a delay of 1 sec guarantees unique CHANGELOG.TIMESTAMP during explicit rollover. Thanks Venky, for the all the help in root causing the issue. Change-Id: I8958824e107e16f61be9f09a11d95f8645ecf34d BUG: 1109692 Signed-off-by: Kotresh H R <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/8196 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* features/changelog: Do not ignore self-heal fops in changelogKotresh H R2014-06-162-5/+7
| | | | | | | | | | | | | | | | | | Problem: Geo-rep fails to sync some files to slave as the changelog entries are missing for those files. Cause: Fops happened when the active brick is down and self- healed later when it came up. Solution: Capture self-heal fops as well in changelog so those entries are not missed. Change-Id: Ibc288779421b5156dd1695e529aba0b602a530e0 BUG: 1109692 Signed-off-by: Kotresh H R <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/8070 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* feature/changelog: Fix compilation warning 'set but not used'Kotresh H R2014-06-121-2/+1
| | | | | | | | | | Change-Id: I37de39aec341fbde9516aa8f8c963b70bd808bac BUG: 1108034 Signed-off-by: Kotresh H R <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/8035 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* Core: Fix issues reported by CppcheckLalatendu Mohanty2014-06-121-11/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixed in this patch: [glusterfs/extras/geo-rep/gsync-sync-gfid.c:105]: (error) Resource leak: fp [glusterfs/libglusterfs/src/xlator.c:651]: (error) Uninitialized variable: gfid [glusterfs/libglusterfs/src/xlator.c:652]: (error) Uninitialized variable: gfid [glusterfs/xlators/cluster/ha/src/ha.c:2699]: (error) Possible null pointer dereference: priv [glusterfs/xlators/features/changelog/src/changelog.c:1464]: (error) Possible null pointer dereference: priv [glusterfs/xlators/mgmt/glusterd/src/glusterd-mgmt-handler.c:865]: (error) Possible null pointer dereference: ctx [glusterfs/xlators/mgmt/glusterd/src/glusterd-mgmt-handler.c:194]: (error) Possible null pointer dereference: ctx [glusterfs/xlators/mgmt/glusterd/src/glusterd-syncop.c:1408]: (error) Possible null pointer dereference: this [glusterfs/xlators/mgmt/glusterd/src/glusterd-utils.c:7002]: (error) Possible null pointer dereference: path_tokens Fixed in 3.4 and 3.5 branch (http://review.gluster.org/#/c/7583/ , http://review.gluster.org/#/c/7605/ will be backported in a separate patch) [glusterfs/xlators/mount/fuse/src/fuse-bridge.c:4688]: (error) Uninitialized variable: finh [glusterfs/xlators/mount/fuse/src/fuse-bridge.c:3081]: (error) Possible null pointer dereference: state [glusterfs/xlators/cluster/dht/src/dht-rebalance.c:1719]: (error) Possible null pointer dereference: ctx [glusterfs/xlators/cluster/stripe/src/stripe.c:4940]: (error) Possible null pointer dereference: local [glusterfs/xlators/mgmt/glusterd/src/glusterd-replace-brick.c:915]: (error) Resource leak: file [glusterfs/xlators/mgmt/glusterd/src/glusterd-replace-brick.c:999]: (error) Resource leak: file [glusterfs/xlators/mgmt/glusterd/src/glusterd-sm.c:248]: (error) Possible null pointer dereference: new_ev_ctx [glusterfs/xlators/mgmt/glusterd/src/glusterd-utils.c:5297]: (error) Possible null pointer dereference: this [glusterfs/xlators/mgmt/glusterd/src/glusterd-utils.c:6273]: (error) Possible null pointer dereference: this [glusterfs/xlators/performance/quick-read/src/quick-read.c:586]: (error) Possible null pointer dereference: iobuf [glusterfs/xlators/nfs/server/src/nfs-common.c:89]: (error) Dangerous usage of 'volname' (strncpy doesn't always null-terminate it). False positives [glusterfs/geo-replication/src/gsyncd.c:99]: (error) Memory leak: str [glusterfs/geo-replication/src/gsyncd.c:395]: (error) Memory leak: argv [glusterfs/xlators/nfs/server/src/nlm4.c:1199]: (error) Possible null pointer dereference: fde [glusterfs/xlators/mgmt/glusterd/src/glusterd-geo-rep.c:1659]: (error) Possible null pointer dereference: command [glusterfs/xlators/mgmt/glusterd/src/glusterd-utils.c:7001]: (error) Possible null pointer dereference: path_tokens Insignificant/Don't care [glusterfs/contrib/uuid/gen_uuid.c:369]: (warning) %ld in format string (no. 2) requires 'long *' but the argument type is 'unsigned long *'. [glusterfs/contrib/uuid/gen_uuid.c:369]: (warning) %ld in format string (no. 3) requires 'long *' but the argument type is 'unsigned long *'. [glusterfs/extras/test/test-ffop.c:27]: (error) Buffer overrun possible for long command line arguments. [glusterfs/xlators/cluster/afr/src/afr-self-heal-common.c:138]: (error) Possible null pointer dereference: __ptr [glusterfs/xlators/cluster/afr/src/afr-self-heal-common.c:140]: (error) Possible null pointer dereference: __ptr [glusterfs/xlators/cluster/afr/src/afr-self-heal-common.c:331]: (error) Possible null pointer dereference: __ptr Change-Id: I7696ed1a2a9553b79f9714e10210a8d563a5abd8 BUG: 1091677 Signed-off-by: Lalatendu Mohanty <lmohanty@redhat.com> Reviewed-on: http://review.gluster.org/7693 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* features/changelog: skipping empty changelogs in historyAjeet Jha2014-06-101-1/+3
| | | | | | | | | | | | | Empty changelgs are unlinked and htime-update is bypassed while publishing partially written changelog. Change-Id: I1533ad431e4fbf592d2f38837fce782932d01e9c BUG: 1105466 Signed-off-by: Ajeet Jha <ajha@redhat.com> Reviewed-on: http://review.gluster.org/7949 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* feature/changelog: Add timeout to changelog barrier.Kotresh H R2014-06-103-5/+98
| | | | | | | | | | | | | | | | | | | This patch introduces configurable 'changelog-barrier-timeout' in changelog. The default changelog-barrier-timeout is set to 120 sec which is same as barrier-timeout of barrier translator. On this timeout, all the barriered fops are unbarriered. It is safe to have this internal timeout for changelog barrier to prevent it from indefinite barrierring of fops if barrier disable notification does not come from snapshot for some reason. Change-Id: Iad07807935f88222cdefcd46312b4b6579186dce BUG: 1094226 Signed-off-by: Kotresh H R <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/7669 Reviewed-by: Kaushal M <kaushal@redhat.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* features/changelog : historical journal consumption.Venky Shankar2014-05-145-6/+159
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Facilitates Glusterfs with the ability to detect file-operations happened in past by scanning the back-end(brick-level) glusterfs journal (changelog). Design: * List of changelogs produces in one perfectly running session are stored in htime file which also holds necessary information about the session start and end time. * Involves fixed sized seeks to identify N'th changelog in the list. * Requires O(log n), (where n is number of changelogs in the list), time to identify the end changelog for the given start-end time interval. Currently the background processing of changelogs is sub optimal. BZ 1097041 tracks the development effort. For complete design, refer the below link: http://lists.nongnu.org/archive/html/gluster-devel/2014-02/msg00206.html Change-Id: I27e49f75e492e843084d0ecaf9130224d08462a0 BUG: 1091961 Signed-off-by: Ajeet Jha <ajha@redhat.com> Signed-off-by: Venky Shankar <vshankar@redhat.com> Signed-off-by: Ajeet Jha <ajha@redhat.com> Reviewed-on: http://review.gluster.org/6930 Reviewed-by: Kotresh HR <khiremat@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* changelog: in C99 `inline` shouldn't be part of function definitionHarshavardhana2014-05-032-5/+6
| | | | | | | | | | | | | | | | | - C99 standard dictates that `inline` should be used only to hint function implementation not as a definition - http://clang.llvm.org/compatibility.html#inline This also leads to run time issues as 'undefined symbols' - Remember to use adding explicit headers when using an external function Change-Id: I66a9030da7ac38ded6e0b6a977182be977382fa2 BUG: 1089172 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/7655 Reviewed-by: Anand Avati <avati@redhat.com> Tested-by: Anand Avati <avati@redhat.com>
* features/changelog: Fix to remove Warning message.Kotresh H R2014-05-021-2/+0
| | | | | | | | | | | | | | | Fix warning message introduced in changelog draining patch. It is not caught in gcc 4.4, caught in gcc 4.8!! Signed-off-by: Kotresh H R <khiremat@redhat.com> Change-Id: I01a8fda2102a409dd6e935805d4d48b41b615fe8 BUG: 1091817 Signed-off-by: Kotresh H R <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/7636 Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* features/changelog: Barrier in changelog during snapshot.Kotresh H R2014-05-015-28/+318
| | | | | | | | | | | | | | | | | | Changelog barriers unlink, rename, rmdir fops on barrier 'on' notification from glusterfsd mgmt layer and unbarriers the same on barrier 'off' notification during snapshot. Please see the following link for more details. http://www.gluster.org/community/documentation/index.php/Changelog_Design_changes_for_snapshot Signed-off-by: Kotresh H R <khiremat@redhat.com> Change-Id: Iea9c62fafc86242f9404e03679b1941aa9c88c9a Signed-off-by: Kotresh H R <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/7415 Reviewed-by: Venky Shankar <vshankar@redhat.com> Reviewed-by: Varun Shastry <vshastry@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* feature/changelog: Draining of in-transit fops in changelog.Kotresh H R2014-05-013-12/+800
| | | | | | | | | | | | | | | | | | | | This is required for Geo-rep to work with snapshots. Following things are done in this patch. 1. Draining of in-transit fops during changelog rollover. 2. Explicit rollover of changelog when snapshot barrier notification comes. During this, intransit fops are drained and changelog is rolled over. For more details on the purpose of the patch. Please visit following link. http://www.gluster.org/community/documentation/index.php/Changelog_Design_changes_for_snapshot Change-Id: I22690131e19d3027f6d8957178bdc3431b9062f6 Signed-off-by: Kotresh H R <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/7216 Reviewed-by: Venky Shankar <vshankar@redhat.com> Reviewed-by: Varun Shastry <vshastry@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* feature/changelog: Change default rollover and fsync-interval timeKotresh H R2014-04-251-2/+2
| | | | | | | | | | | | This will change the following default configurables. 1. rollover-time: from 60 to 15. 2. fsync-interval: from 0 to 5. Change-Id: I9c8db01376967c4f19547ec87f54833f8b139d29 Signed-off-by: Kotresh H R <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/7545 Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* build: MacOSX Porting fixesHarshavardhana2014-04-242-7/+9
| | | | | | | | | | | | | | | | | | | | | git@forge.gluster.org:~schafdog/glusterfs-core/osx-glusterfs Working functionality on MacOSX - GlusterD (management daemon) - GlusterCLI (management cli) - GlusterFS FUSE (using OSXFUSE) - GlusterNFS (without NLM - issues with rpc.statd) Change-Id: I20193d3f8904388e47344e523b3787dbeab044ac BUG: 1089172 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Signed-off-by: Dennis Schafroth <dennis@schafroth.com> Tested-by: Harshavardhana <harsha@harshavardhana.net> Tested-by: Dennis Schafroth <dennis@schafroth.com> Reviewed-on: http://review.gluster.org/7503 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* build: do not create versioned <xlator>.so filesNiels de Vos2014-03-211-1/+1
| | | | | | | | | | | | | | | | | | There has been a misspelled option in the Makefile.am files. The option is called -avoid-version, and not -avoidversion. It is not trivial to provide a test-case for this. One way would be to check generated RPMs with a command like this (output should be empty): $ rpm -qlp *.rpm | grep -E '/xlator/.+.so.0' Change-Id: I2a6cc557eada4d098b73af5a254f8c75707543da BUG: 1078365 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/7299 Reviewed-by: Lalatendu Mohanty <lmohanty@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* changelog: Restrict length of unix socket files to UNIX_PATH_MAX.Raghavendra Talur2014-02-052-2/+2
| | | | | | | | | | | | Bug fix for Coverity-CID 1124847. Change-Id: I410ef8e06cbc491b1f72535298fae5e9bc77220d BUG: 789278 Signed-off-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-on: http://review.gluster.org/6870 Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* features/changelog: more changelog fixes.Ajeet Jha2013-12-126-21/+148
| | | | | | | | | | | | | | -> log additional records. -> include FOP number for metadata. -> prevent crash if inode is not found in a fop. Change-Id: I9edd4b71819ebd68c6a2b4150ae279c471d129da BUG: 1036536 Signed-off-by: Ajeet Jha <ajha@redhat.com> Reviewed-on: http://review.gluster.org/6403 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@gmail.com> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* features/changelog : Improvement in changelog "encoding-change".ajha2013-09-294-17/+26
| | | | | | | | | | | | | | | | | change in encoding method of changelog was critical section for "fop dispatch thread", "roll-over thread" and "reconfigure dispatch thread". In this patch the "encoding-method" is changed by the reconfigure dispatch thread lazily during handle_change, which solves the concurrency among the racing threads. BUG: 1002940 Change-Id: I78c3e8887efa46d0fcc60755cdf4243031cfa3eb Signed-off-by: Ajeet Jha <ajha@redhat.com> Reviewed-on: http://review.gluster.org/5844 Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Harshavardhana <harsha@harshavardhana.net>
* core: block unused signals in created threadsAnand Avati2013-09-251-6/+6
| | | | | | | | | | | | | | | Block all signal except those which are set for explicit handling in glusterfs_signals_setup(). Since thread spawning code in libglusterfs and xlators can get called from application threads when used through libgfapi, it is necessary to do this blocking. Change-Id: Ia320f80521a83d2edcda50b9ad414583a0175281 BUG: 1011662 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/5995 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* gsyncd / geo-rep: Introduce basic crawl instrumentationVenky Shankar2013-09-041-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch extends the persistent instrumentation work done by Aravinda (@avishwa), by introducing a handfull of instrumentation variables for crawl. These variables are "pulled up" by glusterd in the event of a geo-replication status cli command and looks something like below: "Uptime=00:21:10;FilesSyned=2982;FilesPending=0;BytesPending=0;DeletesPending=0;" "FilesPending", "BytesPending" and "DeletesPending" are short-lived variables that are non-zero when a changelog is being processes (ie. when an active sync in ongoing). After a successfull changelog process "FilesPending" is summed up into "FilesSynced". The three short-lived variabled are then reset to zero and the data is persisted Additionally this patch also reverts some of the changes made for BZ #986929 (those were not needed). Change-Id: I948f1a0884ca71bc5e5bcfdc017d16c8c54fc30b BUG: 990420 Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/5441 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* glusterd: Try to start all bricks on 'start force'Kaushal M2013-08-181-4/+6
| | | | | | | | | | | | | | | | | | | A volume would fail to start if any one of the bricks fails staging or fails to start, even with the 'force' option. With this patch, when the 'force' option is given for a volume start, glusterd will continue and start other bricks even if one fails staging or starting. Also did a small fix in changelog, to prevent it crashing when it fails to init. Change-Id: I7efbd9ab13d12d69b0335ae54143fa17586f8f98 BUG: 994375 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/5510 Reviewed-by: Venky Shankar <vshankar@redhat.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
generated by cgit (git 2.34.1) at 2024-05-02 00:51:20 +0000