summaryrefslogtreecommitdiffstats
path: root/xlators/features/changelog/lib/src
Commit message (Collapse)AuthorAgeFilesLines
* libglusterfs: specify ctx in gf_log_set_loglevelZhang Huan2017-12-061-1/+1
| | | | | | | | | specify ctx in gf_log_set_loglevel, instead of getting it from a thread specific variable. Change-Id: I498f826e8e32231235a6b0005026a27c327727fd BUG: 1521213 Signed-off-by: Zhang Huan <zhanghuan@open-fs.com>
* features/libgfchangelog: Fix coverity issuesAravinda VK2017-11-132-35/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Error: DEADCODE: xlators/features/changelog/lib/src/gf-changelog-journal-handler.c:524: dead_error_begin: Execution cannot reach this statement: "default:". Error: DEADCODE: xlators/features/changelog/lib/src/gf-history-changelog.c:984: dead_error_line: Execution cannot reach the expression "to" inside this statement: "if (!from || !to) ret = -1;". Error: REVERSE_INULL: xlators/features/changelog/lib/src/gf-changelog-journal-handler.c:678: check_after_deref: Null-checking "entry" suggests that it may be null, but it has already been dereferenced on all paths leading to the check. Error: STACK_USE: xlators/features/changelog/lib/src/gf-changelog-journal-handler.c:275: stack_use_local_overflow: Local variable "ascii" uses 12288 bytes of stack space, which exceeds the maximum single use of 10000 bytes. Error: STACK_USE: xlators/features/changelog/lib/src/gf-changelog-journal-handler.c:167: stack_use_local_overflow: Local variable "ascii" uses 12288 bytes of stack space, which exceeds the maximum single use of 10000 bytes. Error: STRING_NULL: xlators/features/changelog/lib/src/gf-changelog-journal-handler.c:589:9: string_null_sink_parm_call: Passing parameter "from_path" to "open" which expects a null-terminated string. Error: UNUSED_VALUE: xlators/features/changelog/lib/src/gf-history-changelog.c:628: assigned_value: Assigning value "-1" to "ret" here, but that stored value is overwritten before it can be used. Error: STRING_NULL: xlators/features/changelog/lib/src/gf-history-changelog.c:518: string_null_argument: Function "sys_pread" does not terminate string "*ccd->changelog". BUG: 789278 Change-Id: I1414ec6d4a118ce0c14df4dbe50995c85fe3ecf7 Signed-off-by: Aravinda VK <avishwan@redhat.com>
* features/libgfchangelog: Structured logging supportAravinda VK2017-11-095-104/+150
| | | | | | | | | | | Structured logging infra is available in logging library with issue #240. Log messages with dynamic content are identified and converted to structured logging format(`gf_msg` to `gf_smsg` and `gf_log` to `gf_slog`) BUG: 1501054 Change-Id: I99b35396455a634f5267eb1379d481ea981e5494 Signed-off-by: Aravinda VK <avishwan@redhat.com>
* features/changelog: Coverity Error Check ReturnVishal Pandey2017-11-081-3/+4
| | | | | | | | If condition to check error in lseek wrapper sys_lseek. Change-Id: Ic96ddbb0898146bbfae11acc86818d6604e5eb98 BUG: 789278 Signed-off-by: Vishal Pandey <vishpandey2014@gmail.com>
* libgfchangelog: Fix possible null pointer dereferenceKotresh HR2017-10-231-6/+6
| | | | | | | | | | If pthread_attr_init fails, gf_msg uses this->name where 'this' is not initialized yet. This patch fixes the same. Change-Id: Ie004cbe1015a0d62fc3b5512e8954c5606eeeb5f Signed-off-by: Kotresh HR <khiremat@redhat.com> BUG: 1505325
* changelog: add mem-pool initializationNiels de Vos2017-07-291-1/+9
| | | | | | | | | | | | | | | | | | | With recent changes to the mem-pool initialization, mem_pools_init_early() and mem_pools_init_late() need to be called before mem_get() is usable. This change has been tested manually with the included test from xlators/features/changelog/lib/examples/c/get-changes.c. Change-Id: I139563c4ff78a566cef2ff7e3da2ee10306def92 BUG: 1475255 Reported-by: Kotresh HR <khiremat@redhat.com> Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: https://review.gluster.org/17900 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kotresh HR <khiremat@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us>
* features/libgfchangelog: Fix encoding to encode only space and newlineAravinda VK2017-07-214-11/+11
| | | | | | | | | | | | | | | | | | libgfchangelog was encoding path using spec rfc3986, but encoding only required for SPACE and NEWLINE chars since the NEWLINE char is used as record separator and SPACE as field separator in the parsed changelogs output. Changed the encoding function to encode only SPACE and NEWLINE. BUG: 1451724 Change-Id: I4305459aab9e710517dd3eb065f0024503064b77 Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: https://review.gluster.org/17674 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Prashanth Pai <ppai@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kotresh HR <khiremat@redhat.com>
* libglusterfs: Name threads on creationRaghavendra Talur2017-07-193-9/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Set names to threads on creation for easier debugging. Output of top -H -p <PID-OF-GLUSTERFSD> Before: 19773 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19774 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19775 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19776 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19777 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19778 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19779 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19780 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19781 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19782 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19783 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19784 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19785 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.01 glusterfsd 19786 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.01 glusterfsd 19787 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.01 glusterfsd 19789 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19790 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 25178 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 5398 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 7881 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd After: 19773 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19774 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glustertimer 19775 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19776 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glustermemsweep 19777 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glustersproc0 19778 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glustersproc1 19779 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterepoll0 19780 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusteridxwrker 19781 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusteriotwr0 19782 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterbrssign 19783 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterbrswrker 19784 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterclogecon 19785 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.01 glusterclogd0 19786 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.01 glusterclogd1 19787 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.01 glusterclogd2 19789 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterposixjan 19790 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterposixfsy 25178 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterepoll1 5398 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterepoll2 7881 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterposixhc Change-Id: Id5f333755c1ba168a2ffaa4fce6e71c375e10703 BUG: 1254002 Updates: #271 Signed-off-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-on: https://review.gluster.org/11926 Reviewed-by: Prashanth Pai <ppai@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* Halo Replication feature for AFR translatorKevin Vigor2017-05-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Summary: Halo Geo-replication is a feature which allows Gluster or NFS clients to write locally to their region (as defined by a latency "halo" or threshold if you like), and have their writes asynchronously propagate from their origin to the rest of the cluster. Clients can also write synchronously to the cluster simply by specifying a halo-latency which is very large (e.g. 10seconds) which will include all bricks. In other words, it allows clients to decide at mount time if they desire synchronous or asynchronous IO into a cluster and the cluster can support both of these modes to any number of clients simultaneously. There are a few new volume options due to this feature: halo-shd-latency: The threshold below which self-heal daemons will consider children (bricks) connected. halo-nfsd-latency: The threshold below which NFS daemons will consider children (bricks) connected. halo-latency: The threshold below which all other clients will consider children (bricks) connected. halo-min-replicas: The minimum number of replicas which are to be enforced regardless of latency specified in the above 3 options. If the number of children falls below this threshold the next best (chosen by latency) shall be swapped in. New FUSE mount options: halo-latency & halo-min-replicas: As descripted above. This feature combined with multi-threaded SHD support (D1271745) results in some pretty cool geo-replication possibilities. Operational Notes: - Global consistency is gaurenteed for synchronous clients, this is provided by the existing entry-locking mechanism. - Asynchronous clients on the other hand and merely consistent to their region. Writes & deletes will be protected via entry-locks as usual preventing concurrent writes into files which are undergoing replication. Read operations on the other hand should never block. - Writes are allowed from _any_ region and propagated from the origin to all other regions. The take away from this is care should be taken to ensure multiple writers do not write the same files resulting in a gfid split-brain which will require resolution via split-brain policies (majority, mtime & size). Recommended method for preventing this is using the nfs-auth feature to define which region for each share has RW permissions, tiers not in the origin region should have RO perms. TODO: - Synchronous clients (including the SHD) should choose clients from their own region as preferred sources for reads. Most of the plumbing is in place for this via the child_latency array. - Better GFID split brain handling & better dent type split brain handling (i.e. create a trash can and move the offending files into it). - Tagging in addition to latency as a means of defining which children you wish to synchronously write to Test Plan: - The usual suspects, clang, gcc w/ address sanitizer & valgrind - Prove tests Reviewers: jackl, dph, cjh, meyering Reviewed By: meyering Subscribers: ethanr Differential Revision: https://phabricator.fb.com/D1272053 Tasks: 4117827 Change-Id: I694a9ab429722da538da171ec528406e77b5e6d1 BUG: 1428061 Signed-off-by: Kevin Vigor <kvigor@fb.com> Reviewed-on: http://review.gluster.org/16099 Reviewed-on: https://review.gluster.org/16177 Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* build: out-of-tree builds generates files in the wrong directoryKaleb S KEITHLEY2016-09-181-13/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | And minor cleanup of a few of the Makefile.am files while we're at it. Rewrite the make rules to do what xdrgen does. Now we can get rid of xdrgen. Note 1. netbsd6's sed doesn't do -i. Why are we still running smoke tests on netbsd6 and not netbsd7? We barely support netbsd7 as it is. Note 2. Why is/was libgfxdr.so (.../rpc/xdr/src/...) linked with libglusterfs? A cut-and-paste mistake? It has no references to symbols in libglusterfs. Note3. "/#ifndef\|#define\|#endif/" (note the '\'s) is a _basic_ regex that matches the same lines as the _extended_ regex "/#(ifndef|define|endif)/". To match the extended regex sed needs to be run with -r on Linux; with -E on *BSD. However NetBSD's and FreeBSD's sed helpfully also provide -r for compatibility. Using a basic regex avoids having to use a kludge in order to run sed with the correct option on OS X. Note 4. Not copying the bit of xdrgen that inserts copyright/license boilerplate. AFAIK it's silly to pretend that machine generated files like these can be copyrighted or need license boilerplate. The XDR source files have their own copyright and license; and their copyrights are bound to be more up to date than old boilerplate inserted by a script. From what I've seen of other Open Source projects -- e.g. gcc and its C parser files generated by yacc and lex -- IIRC they don't bother to add copyright/license boilerplate to their generated files. It appears that it's a long-standing feature of make (SysV, BSD, gnu) for out-of-tree builds to helpfully pretend that the source files it can find in the VPATH "exist" as if they are in the $cwd. rpcgen doesn't work well in this situation and generates files with "bad" #include directives. E.g. if you `rpcgen ../../../../$srcdir/rpc/xdr/src/glusterfs3-xdr.x`, you get an #include directive in the generated .c file like this: ... #include "../../../../$srcdir/rpc/xdr/src/glusterfs3-xdr.h" ... which (obviously) results in compile errors on out-of-tree build because the (generated) header file doesn't exist at that location. Compared to `rpcgen ./glusterfs3-xdr.x` where you get: ... #include "glusterfs3-xdr.h" ... Which is what we need. We have to resort to some Stupid Make Tricks like the addition of various .PHONY targets to work around the VPATH "help". Warning: When doing an in-tree build, -I$(top_builddir)/rpc/xdr/... looks exactly like -I$(top_srcdir)/rpc/xdr/... Don't be fooled though. And don't delete the -I$(top_builddir)/rpc/xdr/... bits Change-Id: Iba6ab96b2d0a17c5a7e9f92233993b318858b62e BUG: 1330604 Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/14085 Tested-by: Niels de Vos <ndevos@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* core: fix unused variable warnings/errorsKaleb S. KEITHLEY2016-08-295-21/+2
| | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a/the "leak" - via the generated rpc/xdr headers - of pragmas that mask these warnings. However 14085 won't pass the smoke test until all the warnings are fixed. Change-Id: I3d8a7a3de35058aa97eab59d3f59208396298b03 BUG: 1369124 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15246 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kotresh HR <khiremat@redhat.com>
* features/libgfchangelog: Log failure in gf_histroy_changelogKotresh HR2016-08-092-4/+24
| | | | | | | | | | | | | | | | | Add error logs if gf_history_changelog fails. If requested changelog range is not available, log the error and exit instead of continuing the loop and exiting in readdir without logging. Also fixed the duplicate MSGID number in 'changelog-lib-messages.h' Change-Id: Icd71b89ae23b48a71380657ba5649029c32fabfd BUG: 1362151 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/15064 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Aravinda VK <avishwan@redhat.com>
* core: use readdir(3) with glibc, and associated cleanupKaleb S. KEITHLEY2016-07-182-50/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Starting with glibc-2.23 (i.e. what's in Fedora 25), readdir_r(3) is marked as deprecated. Specifically the function decl in <dirent.h> has the deprecated attribute, and now warnings are thrown during the compile on Fedora 25 builds. The readdir(_r)(3) man page (on Fedora 25 at least) and World+Dog say that glibc's readdir(3) is, and always has been, MT-SAFE as long as only one thread is accessing the directory object returned by opendir(). World+Dog also says there is a potential buffer overflow in readdir_r(). World+Dog suggests that it is preferable to simply use readdir(). There's an implication that eventually readdir_r(3) will be removed from glibc. POSIX has, apparently deprecated it in the standard, or even removed it entirely. Over and above that, our source near the various uses of readdir(_r)(3) has a few unsafe uses of strcpy()+strcat(). (AFAIK nobody has looked at the readdir(3) implemenation in *BSD to see if the same is true on those platforms, and we can't be sure of MacOS even though we know it's based on *BSD.) Change-Id: I5481f18ba1eebe7ee177895eecc9a80a71b60568 BUG: 1356998 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/14838 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Kotresh HR <khiremat@redhat.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* build: correctly format some (s)size_t messagesNiels de Vos2016-07-171-1/+1
| | | | | | | | | | | | | | | | | | On 32-bit builds the are are warnings like these: posix.c:6438: warning: format '%ld' expects type 'long int', but argument 11 has type 'ssize_t' Instead of using "%l" for (signed) size_t variables, "%z" should be used. BUG: 1198849 Change-Id: I6f57b5e8ea174dd9e3056aff5da685e497894ccf Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/14933 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org>
* libglusterfs (timer): race conditions, illegal mem access, mem leakKaleb S KEITHLEY2016-06-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | While investigating gfapi memory consumption with valgrind, valgrind reported several memory access issues. Also see the timer 'registry' being recreated (shortly) after being freed during teardown due to the way it's currently written. Passing ctx as data to gf_timer_proc() is prone to memory access issues if ctx is freed before gf_timer_proc() terminates. (And in fact this does happen, at least in valgrind.) gf_timer_proc() doesn't need ctx for anything, it only needs ctx->timer, so just pass that. Nothing ever calls gf_timer_registry_init(). Nothing outside of timer.c that is. Making it and gf_timer_proc() static. Change-Id: Ia28454dda0cf0de2fec94d76441d98c3927a906a BUG: 1333925 Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/14247 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Poornima G <pgurusid@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* remove unused variablesPrasanna Kumar Kalever2016-05-061-1/+0
| | | | | | | | | | | | | | Cleaning dead initializations. Change-Id: I53ae506593cd10441d61df3b2c9249544a7871f7 BUG: 1254067 Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com> Reviewed-on: http://review.gluster.org/11932 Tested-by: Prasanna Kumar Kalever <pkalever@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra Talur <rtalur@redhat.com>
* core: add preadv, pwritev, pread, pwrite syscall wrappersKaleb S KEITHLEY2015-12-221-2/+2
| | | | | | | | | | | | | add additional system calls plus pick up a couple missed unwrapped system calls that seem to have slipped into the master branch. Change-Id: If268ccd5e9a139ac3ffd38293c67cd2f62ea5b58 BUG: 1289258 Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/12895 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* libgfchangelog: Allocate logbuf_pool in master xlatorKotresh HR2015-12-221-0/+4
| | | | | | | | | | | | | The master xlator needs to allocate 'logbuf_pool' else 'gf_msg' fails with EINVAL. Change-Id: I6b2d3450250de7e77126d12b75b0dbc4db414bfb BUG: 1292463 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/12997 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* core: use syscall wrappers instead of direct syscallsKaleb S. KEITHLEY2015-10-285-30/+37
| | | | | | | | | | | | | | | various xlators and other components are invoking system calls directly instead of using the libglusterfs/syscall.[ch] wrappers. If not using the system call wrappers there should be a comment in the source explaining why the wrapper isn't used. Change-Id: I8ef94c48728666465abf126c778b70c9e5c00e47 BUG: 1267967 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/12273 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* all: reduce "inline" usageJeff Darcy2015-09-011-52/+1
| | | | | | | | | | | | | | | | | | | | | | | | | There are three kinds of inline functions: plain inline, extern inline, and static inline. All three have been removed from .c files, except those in "contrib" which aren't our problem. Inlines in .h files, which are overwhelmingly "static inline" already, have generally been left alone. Over time we should be able to "lower" these into .c files, but that has to be done in a case-by-case fashion requiring more manual effort. This part was easy to do automatically without (as far as I can tell) any ill effect. In the process, several pieces of dead code were flagged by the compiler, and were removed. Change-Id: I56a5e614735c9e0a6ee420dab949eac22e25c155 BUG: 1245331 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/11769 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* features/changelog: Porting log messages to new logging frameworkAnusha Rao2015-08-118-117/+462
| | | | | | | | | | | Change-Id: Ic7f842acca52908fd88e0796dc90b82650405b25 BUG: 1194640 Signed-off-by: Anusha Rao <anusha91rao@gmail.com> Reviewed-on: http://review.gluster.org/10532 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Reviewed-by: Kotresh HR <khiremat@redhat.com>
* build: Mac OS X build issues, no spinlock, need sys_lgetxattrKaleb S. KEITHLEY2015-07-051-1/+1
| | | | | | | | | | | | use regular locks, use our syscall wrappers in libglusterfs Change-Id: I7e0d00956366806af041b69b65d1f169aa0d2ae2 BUG: 1238793 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/11515 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org>
* libgfchangelog: Fix crash in gf_changelog_processKotresh HR2015-06-172-8/+14
| | | | | | | | | | | | | | | | | | | | | | | Problem: Crash observed in gf_changelog_process and gf_changelog_callback_invoker. Cause: Assignments to arguments passed to thread is done post thread creation. If the thread created gets scheduled before the assignment and access these variables, it would crash with segmentation fault. Solution: Assignments to arguments are done prior to the thread creation. Change-Id: I6afc8ccedd050cf4b50b967fef8287a0c834177b BUG: 1232666 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/11273 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* features/changelog: Remove inline keyword to avoid warnings (gcc v5.1.1)Anoop C S2015-06-012-3/+3
| | | | | | | | | | | | | | | | | | | | | | | When compiled with gcc5, following warnings were displayed and volume start failed: changelog-helpers.h:499:1: warning: inline function 'changelog_dispatch_event' declared but never defined changelog_dispatch_event (xlator_t *, changelog_priv_t *, changelog_event_t *); gf-changelog-journal-handler.c:692:17: warning: 'list_add_tail' is static but used in inline function 'gf_changelog_queue_journal' which is not static list_add_tail (&entry->list, &jnl_proc->entries); Fix is to remove the keyword from function prototype and definitions. Change-Id: I188b35b7ca087a94d7a48a052b05a6d845e3b74b BUG: 1226307 Signed-off-by: Anoop C S <achiraya@redhat.com> Reviewed-on: http://review.gluster.org/11004 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* features/changelog: Avoid creation of empty changelogsSaravanakumar Arumugam2015-05-081-7/+38
| | | | | | | | | | | | | | | | | | An empty changelog when rolled over gets unlinked and indexed with a modified path-name in htime file. The modification is "changelog" not "CHANGELOG" in basename of the empty changelog file. Change-Id: I77fd0b48b5c33c245418f5ac7a9756f08ece24d9 BUG: 1208470 Signed-off-by: Ajeet Jha <ajha@redhat.com> Signed-off-by: Saravanakumar Arumugam <sarumuga@redhat.com> Reviewed-on: http://review.gluster.org/9572 Tested-by: NetBSD Build System Reviewed-by: Aravinda VK <avishwan@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kotresh HR <khiremat@redhat.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* features/changelog: Version support for Changelog ParserAravinda VK2015-05-061-9/+66
| | | | | | | | | | | | | | | | | | As optional feature, during unlink, full path will be recorded. Changelog Version number to be bumped up to 1.2. With this patch, parser checks the version number before parsing and handles accordingly. Change-Id: Ic1ad98259c39e417029a08e26a1d4b467817e65a BUG: 1214561 Signed-off-by: Aravinda VK <avishwan@redhat.com> Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/10166 Reviewed-by: Saravanakumar Arumugam <sarumuga@redhat.com> Tested-by: NetBSD Build System Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* build: make contrib/uuid dependency optionalNiels de Vos2015-04-103-12/+4
| | | | | | | | | | | | | | | | | | | On Linux systems we should use the libuuid from the distribution and not bundle and statically link the contrib/uuid/ bits. libglusterfs/src/compat-uuid.h has been introduced and should become an abstraction layer for different UUID APIs. Non-Linux operating systems should implement their compatibility layer there. Once all operating systems have an implementation in compat-uuid.h, we can remove contrib/uuid/ from the repository completely. Change-Id: I345e5357644be2521685e00358bb8c83c4ea0577 BUG: 1206587 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/10129 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* features/changelog: fix possible illegal memory access (CID 1288819)Michael Adam2015-04-081-1/+2
| | | | | | | | | | | | | | | | Coverity CID 1288819 strncpy executed with a limit equal to the target array size potentially leaves the target string not null terminated. Make sure the copied string is a valid 0 terminated string. Change-Id: Ie2d2970f37840146aa18724be3b89e93194c8160 BUG: 789278 Signed-off-by: Michael Adam <obnox@samba.org> Reviewed-on: http://review.gluster.org/10062 Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* features/changelog: fix possible illegal memory access (CID 1288821)Michael Adam2015-04-051-1/+2
| | | | | | | | | | | | | | | | | Coverity CID 1288821 strncpy executed with a limit equal to the target array size potentially leaves the target string not null terminated. Make sure the copied string is a valid 0 terminated string. Change-Id: I5ecc60549864cf50e3facbb8a2d9228cd67b57b5 BUG: 789278 Signed-off-by: Michael Adam <obnox@samba.org> Reviewed-on: http://review.gluster.org/10061 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* libgfchangelog: Use correct 'this' pointer on new thread creationKotresh HR2015-04-034-4/+12
| | | | | | | | | | | | | | | | When libgfchangelog is linked with non xlator application, it should point to 'master' xlator which is initiated separately. When ever a new thread is created, 'THIS' points to the global xlator. 'THIS' should point to corresponding xlator even then. This patch adjusts the pointer accordingly. Change-Id: I2a199bb3c73146a0329540aedcbae697a00f6f0a BUG: 1207643 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/10074 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* features/changelog: fix possible illegal mem access (CID 1288822)Michael Adam2015-04-021-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | Coverity CID 1288822 (#1 of 2) strncpy executed with a limit equal to the target array size potentially leaves the target string not null terminated. In this case the strncpy is not needed due to the snprintf with the same target buffer which follows immediately. This patch also removes the now unneeded scratch_dir argument to gf_changelog_init_history(), which is semantically correct, since scratch_dir has previously been filled into jnl->jnl_working_dir by the caller, and this is now used to fill hist_scratch_dir. Change-Id: Ib1ed3a1058e80e34191758921b49c29030d6c9db BUG: 789278 Signed-off-by: Michael Adam <obnox@samba.org> Reviewed-on: http://review.gluster.org/10058 Reviewed-by: Kotresh HR <khiremat@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Xlators : Fixed typosManikandan Selvaganesh2015-04-021-2/+2
| | | | | | | | | | | Change-Id: I948f85cb369206ee8ce8b8cd5e48cae9adb971c9 BUG: 1075417 Signed-off-by: Manikandan Selvaganesh <mselvaga@redhat.com> Reviewed-on: http://review.gluster.org/9529 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com>
* features/changelog: fix possible memory illegal access (2 of 2, coverity)Michael Adam2015-04-011-1/+2
| | | | | | | | | | | | | | | | | | Coverity CID 1288822 (#2 of 2) strncpy executed with a limit equal to the target array size potentially leaves the target string not null terminated. Make sure the copied string is a valid 0 terminated string. Change-Id: If283dd6f716912f65729edf6ea26a4331a697151 BUG: 789278 Signed-off-by: Michael Adam <obnox@samba.org> Reviewed-on: http://review.gluster.org/10059 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Poornima G <pgurusid@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* features/bit-rot: Implementation of bit-rot xlatorVenky Shankar2015-03-242-118/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the "Signer" -- responsible for signing files with their checksums upon last file descriptor close (last release()). The event notification facility provided by the changelog xlator is made use of. Moreover, checksums are as of now SHA256 hash of the object data and is the only available hash at this point of time. Therefore, there is no special "what hash to use" type check, although it's does not take much to add various hashing algorithms to sign objects with. Signatures are stored in extended attributes of the objects along with the the type of hashing used to calculate the signature. This makes thing future proof when other hash types are added. The signature infrastructure is provided by bitrot stub: a little piece of code that sits over the POSIX xlator providing interfaces to "get or set" objects signature and it's staleness. Since objects are signed upon receiving release() notification, pre-existing data which are "never" modified would never be signed. To counter this, an initial crawler thread is spawned The crawler scans the entire brick for objects that are unsigned or "missed" signing due to the server going offline (node reboots, crashes, etc..) and triggers an explicit sign. This would also sign objects when bit-rot is enabled for a volume and/or after upgrade. Change-Id: I1d9a98bee6cad1c39c35c53c8fb0fc4bad2bf67b BUG: 1170075 Original-Author: Raghavendra Bhat <raghavendra@redhat.com> Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/9711 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Bitrot StubVenky Shankar2015-03-241-6/+16
| | | | | | | | | | | | | Bitrot stub implements object versioning required for identifying signature freshness. More details about versioning is explained as a part of the "bitrot feature documentation" patch. Change-Id: I2ad70d9eb109ba4a12148ab8d81336afda529ad9 BUG: 1170075 Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/9709 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* libgfchangelog: cleanups on disconnectionVenky Shankar2015-03-244-138/+278
| | | | | | | | | | | | | | | | | | | | | | | [WIP patch as of now, just needs a little tweak] A pending TODO in the code caused regressions to fail as bitrot daemons are spawned during volume start (equivalent to enabling bitrot by default). The problematic part that casued such failures is during brick disconnections with unsafe handling of event data structured in the code. With this patch, data structures are properly cleaned up with care taken to cleanup all accessors first. This also fixes potential memory leaks which was bluntly ignored before. Change-Id: I70ed82cb1a0fb56c85ef390007e321a97a35c5ce BUG: 1170075 Signed-off-by: Venky Shankar <vshankar@redhat.com> original-author: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/9959 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* libgfchangelog: Fix faulty reference to xlator contextVenky Shankar2015-03-243-55/+94
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: libgfchangelog initializes global xlator on library load (via constructor: _ctor) and mangles it's xlator context thereby messing with certain important members of the command structure. On receiving an RPC disconnection event, if the point-of-execution was in libgfchangelogs context, accessing ->cmd_args during RPC notify resulted in a segfault. Fix: Since the libarary needs to be able to work with processes that have a notion of an xlator (THIS in particular) and without it, care needs to be taken to allocate the global xlator when needed. Moreover, the actual fix is to use the correct xlator context in both cases. A new API is introduces when needs to be invoked by the conusmer (although this could have been done during register() call, keeping it a separate API makes thing flexible and easy). Test: The issue is observed when a brick process goes offline. This is triggered when test cases (.t's) are run in bulk, since each test essestially spawns bricks processes (on volume start) and terminates them (volume stop). Since bitrot daemon, as of now, spawns upon volume start, the issue is much observed when the volume is taken offline at the end of each test case. With this fix, running the basic and core test cases along with building the linux kernel has passed without daemon segfaults. Thanks to Johnny (rabhat@) for helping in debugging the issue (and with the fix :)). Change-Id: I8d3022bf749590b2ee816504ed9b1dfccc65559a BUG: 1170075 Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/9953 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* features/changelog: RPC'fy {libgf}changelogVenky Shankar2015-03-1812-706/+2015
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces RPC based communication between the changelog translator and libgfchangelog. It replaces the old pathetic stream based interaction that existed earlier (due to time constraints :-/). Changelog, upon initialization starts a RPC server (rpcsvc) allowing clients to invoke a probe API as a bootup mechanism to request for event notifications. During probe, clients can choose an event filter specifying the type(s) of events they are interested in. As of now there is no way to change the event notification set once the probe RPC call is made, but that is easier to implement. The actual event notifications is done on a separate RPC session. The client (libgfchangelog) itself starts and RPC server which the changelog translator "connects back" during probe. Notifications are dispatched by a bunch of threads from the server (translator) and the client optionally orders them if ordered notifications are requried. FOPs fill in their respective event details in a buffer (rot-buffs to be particular) and a bunch of threads (consumers) swap the buffers out of roatation and dispatch them via RPC. To avoid writer starvation, then number of dispatcher threads is one less than the number of buffer list in rot-buffs.x libgfchangelog becomes purely callback based -- upon event notification from the server (and re-ordering them if required) invoke a callback routine specified by consumer(s). A major part of the patch is also aimed at providing backward compatibility for geo-replication, which was one of the main consumer of the stream based API. Also, this patch does not\ "turn on" event notifications for all fops, just a bunch which is currently in requirement. Another pain point is that the server does not filter events before dispatching it to the clients. That load is taken up by the client itself (although it's done at the library layer rather than making it hard on the callback implementor). This needs improvement and care needs to be taken to not load the server up with expensive filtering mechanisms. Change-Id: Ibf60a432b68f2dfa60c6f9add2bcfd37a9c41395 BUG: 1170075 Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/9708 Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* changelog: Unchecked buffer fill in gf_history_changelog_next_changeNiels de Vos2015-03-041-0/+5
| | | | | | | | | | | | | | | | | | | A gf_history_changelog_next_change() calls gf_readline() to fill a buffer without checking buffer size. The size of maxlen is not verified to be less than the lenght of buffer. This could result in the over filling of buffer of maxlen is greater than PATH_MAX. Check the size of maxlen to be less than PATH_MAX and return a fail code as needed. BUG: 1174017 Change-Id: Ic53b1a6e25af69a339bc15fb2d233dc1e457910f Reported-by: Keith Schincke <kschinck@redhat.com> Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9275 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* feature/changelog: Fix changelog and history scan failure.Kotresh HR2015-01-271-2/+4
| | | | | | | | | | | | | Fixes bad file descriptor issue while cleaning up scratch directory during gf_changelog_register. Change-Id: Ia6aa8d55dcc2209144b48b6583681a155d919c42 BUG: 1162057 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/9495 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* features/changelog: Cleanup .processing and .current directoryAravinda VK2015-01-181-0/+21
| | | | | | | | | | | | | | | | | On changelog_register cleanup .processing, .history/.processing, .current and .history/.current from the working directory. Moved glusterd_recursive_rmdir and glusterd_for_each_entry to common place(libglusterfs) and renamed as recursive_rmdir and GF_FOR_EACH_ENTRY_IN_DIR respectively BUG: 1162057 Change-Id: I1f98468a344cead039026762a805437b2f9e507b Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/9082 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* changelog: correct mmap() error checkingNiels de Vos2014-11-171-8/+6
| | | | | | | | | | | | | | | Upon failure, mmap() returns MAP_FAILED, which is not equal to NULL. This small correction makes sure that the potential error gets caught and handled. BUG: 1138621 Change-Id: I0a88b5187afa7187dcaa8f7d2cb0f9bb775c929d Reported-by: Santosh Pradhan <santosh.pradhan@gmail.com> Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9130 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* changelog: replace MAKE_HTIME_FILE_PATH with snprintf()Niels de Vos2014-10-281-7/+1
| | | | | | | | | | | | | | | | The used once MAKE_HTIME_FILE_PATH macro uses strcpy and strcat into a fixed buffer without checking the input lengths. Recommend replacing with a snprintf. Change-Id: Ia0245096774dc84be1b937e1d5750f3634fff034 BUG: 1099645 Reported-by: Keith Schincke <kschinck@redhat.com> Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/8977 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* build: make GLUSTERD_WORKDIR rely on localstatedirHarshavardhana2014-08-071-2/+1
| | | | | | | | | | | | | | | | | | | | | | - Break-way from '/var/lib/glusterd' hard-coded previously, instead rely on 'configure' value from 'localstatedir' - Provide 's/lib/db' as default working directory for gluster management daemon for BSD and Darwin based installations - loff_t is really off_t on Darwin - fix-off the warnings generated by clang on FreeBSD/Darwin - Now 'tests/*' use GLUSTERD_WORKDIR a common variable for all platforms. - Define proper environment for running tests, define correct PATH and LD_LIBRARY_PATH when running tests, so that the desired version of glusterfs is used, regardless where it is installed. (Thanks to manu@netbsd.org for this additional work) Change-Id: I2339a0d9275de5939ccad3e52b535598064a35e7 BUG: 1111774 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/8246 Tested-by: Gluster Build System <jenkins@build.gluster.com>
* geo-rep/libgfchangelog: Support of symlinks while creation of working dir.Kotresh H R2014-08-041-1/+1
| | | | | | | | | | | | | In gf_changelog_register, enable symlink support while creating working directory if its not already created. Change-Id: I4b81762d04f5276a65087d2ff94f2a36dc504b58 BUG: 1125843 Signed-off-by: Kotresh H R <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/8409 Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* geo-rep/libgfchangelog: Create working dir during changelog_register if not ↵Kotresh H R2014-08-011-6/+15
| | | | | | | | | | | | | | | | | | | present. Earlier, xysnc's register was being called first, which was creating working directory before calling changelog_register. Now it is history crawl first. Hence working directory would not have been created. Create it in gf_changelog_register itself if it is not already created. Change-Id: Ief3f2b87deaf5da16c135b64be1be42e0a7647f3 BUG: 1125843 Signed-off-by: Kotresh H R <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/8399 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Aravinda VK <avishwan@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* changelog: variable 'writen' is changedHumble Chirammal2014-07-143-7/+7
| | | | | | | | | | | | | This patch change the variable name to 'written' in changelog, along with few other typo fixing. Change-Id: I1d3cbea5c89fc0a15233bb6e61b4fbd4bfdd3a67 BUG: 1075417 Signed-off-by: Humble Chirammal <hchiramm@redhat.com> Reviewed-on: http://review.gluster.org/8267 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* features/changelog: Fix for history api issue during upgradeAjeet Jha2014-06-221-27/+26
| | | | | | | | | | | | | | | On failure during history changelog availability check, there was an attempt to destory attribute (of consume thread) which was not initialised. Change-Id: Ica7a98ee70eb1303303884b01ef76ab71430a351 BUG: 1111169 Signed-off-by: Ajeet Jha <ajha@redhat.com> Reviewed-on: http://review.gluster.org/8118 Reviewed-by: Kotresh HR <khiremat@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* features/changelog: skipping empty changelogs in historyAjeet Jha2014-06-101-16/+6
| | | | | | | | | | | | | Empty changelgs are unlinked and htime-update is bypassed while publishing partially written changelog. Change-Id: I1533ad431e4fbf592d2f38837fce782932d01e9c BUG: 1105466 Signed-off-by: Ajeet Jha <ajha@redhat.com> Reviewed-on: http://review.gluster.org/7949 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* features/changelog: NULL termination after memcpy should be of dest pointerHarshavardhana2014-05-272-14/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | snippet code < ..memcpy (bufff, src, len - 1); ..*(src + len) = '\0'; ---> Wrong! > Source buffer lvalue() referencing with offset style NULL termination is wrong and unnecessary when we have a destination buffer, it is the destination buffer which should look to be NULL terminated Makes it more readable and also clearly logical. < ..memcpy (bufff, src, len - 1); ..bufff[len -1] = '\0'; ---> Correct! > Change-Id: I6d7f312aaa5c541f0345649ff1ef9f193892b674 BUG: 1099986 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/7836 Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
generated by cgit (git 2.34.1) at 2024-05-20 06:36:39 +0000