summaryrefslogtreecommitdiffstats
path: root/xlators/features/bit-rot
Commit message (Collapse)AuthorAgeFilesLines
* glusterfsd: Memleak in glusterfsd process while brick mux is onMohit Agrawal2018-02-271-13/+9
| | | | | | | | | | | | | | | | | | Problem: At the time of stopping the volume while brick multiplex is enabled memory is not cleanup from all server side xlators. Solution: To cleanup memory for all server side xlators call fini in glusterfs_handle_terminate after send GF_EVENT_CLEANUP notification to top xlator. BUG: 1544090 Signed-off-by: Mohit Agrawal <moagrawa@redhat.com> Note: Run all test-cases in separate build (https://review.gluster.org/19574) with same patch after enable brick mux forcefully, all test cases are passed. Change-Id: Ia10dc7f2605aa50f2b90b3fe4eb380ba9299e2fc
* Revert "glusterfsd: Memleak in glusterfsd process while brick mux is on"Mohit Agrawal2018-02-191-9/+13
| | | | | | | | | | | There are still remain some code paths where cleanup is required while brick mux is on.I will upload a new patch after resolve all code paths. This reverts commit b313d97faa766443a7f8128b6e19f3d2f1b267dd. BUG: 1544090 Change-Id: I26ef1d29061092bd9a409c8933d5488e968ed90e Signed-off-by: Mohit Agrawal <moagrawa@redhat.com>
* build: add --without-server optionNiels de Vos2018-02-192-0/+4
| | | | | | | | | | | | | | | | With Gluster 4.0 we will not provide the server components for EL6 and older. At one point Gluster 4.x will get GlusterD2, which requires Golang tools in the distribution. EL6 does not contain these at the moment. With this change, it is possible to `./configure --without-server` which prevents building glusterd and the xlators for the bricks. Building RPMs can pass `--without server` and the glusterfs-server sub-package will not be created. Change-Id: I97f5ccf9f2c76e60d9af83915fc59fae57ad6d25 BUG: 1074947 Signed-off-by: Niels de Vos <ndevos@redhat.com>
* glusterfsd: Memleak in glusterfsd process while brick mux is onMohit Agrawal2018-02-151-13/+9
| | | | | | | | | | | | | Problem: At the time of stopping the volume while brick multiplex is enabled memory is not cleanup from all server side xlators. Solution: To cleanup memory for all server side xlators call fini in glusterfs_handle_terminate after send GF_EVENT_CLEANUP notification to top xlator. BUG: 1544090 Change-Id: Ifa1525e25b697371276158705026b421b4f81140 Signed-off-by: Mohit Agrawal <moagrawa@redhat.com>
* gfapi: return pre/post attributes from glfs_pread/pwriteKinglong Mee2018-02-121-1/+1
| | | | | | | | | | | | | | | As nfs-ganesha, a wcc data contains pre/post attributes is return in read/write rpc reply. nfs-ganesha get those attributes by two getattr between the real read/write right now. But, gluster has return pre/post attributes from glusterfsd, those attributes are skipped in syncop/gfapi, if gfapi return them, the upper user (nfs-ganesha) can use them directly without any duplicate getattr. Updates: #389 Change-Id: I7b643ae4241cfe2aeb17063de00192d81674024a Signed-off-by: Kinglong Mee <mijinlong@open-fs.com>
* features/bit-rot: Fix default value for scrub-throttleKotresh HR2018-01-181-0/+1
| | | | | | Updates #302 Change-Id: Ifc23d5f8b5bc78b95f7c9d92d6df37a9168102f7 Signed-off-by: Kotresh HR <khiremat@redhat.com>
* features/bit-rot: fix volume options for GD2Atin Mukherjee2018-01-171-1/+11
| | | | | | | Updates #302 Change-Id: I8809f269b93253bce049fdbf28a7f44e85a2b9e7 Signed-off-by: Atin Mukherjee <amukherj@redhat.com>
* feature/bitrot: remove internal xattrs from lookup cbkRavishankar N2017-12-192-7/+21
| | | | | | | | | | | | | | | | | | | | | Problem: afr requests all xattrs in lookup via the list-xattr key. If bitrot is enabled and later disabled, or if the bitrot xattrs were present due to an older version of bitrot which used to create the xattrs without enabling the feature, the xattrs (trusted.bit-rot.version in particular) was not getting filtered and ended up reaching the client stack. AFR, on noticing different values of the xattr across bricks of the replica, started triggering spurious metadata heals. Fix: Filter all internal xattrs in bitrot xlator before unwinding lookup, (f)getxattr. Thanks to Kotresh for the help in RCA'ing. Change-Id: I5bc70e4b901359c3daefc67b8e4fa6ddb47f046c BUG: 1524365 Signed-off-by: Ravishankar N <ravishankar@redhat.com>
* all: Simplify component message id's definitionXavier Hernandez2017-12-142-681/+106
| | | | | | | | | This patch creates a new way of defining message id's that is easier and less error prone because it doesn't require so many manual changes each time a new component is defined or a new message created. Change-Id: I71ba8af9ac068f5add7e74f316a2478bc991c67b Signed-off-by: Xavier Hernandez <jahernan@redhat.com>
* features/bitrot: Add default value for stub export optionKaushal M2017-11-291-1/+2
| | | | | | | Updates #302 Change-Id: Ife78e15ad6300f09a820cbc25f43f214dc5e611d Signed-off-by: Amar Tumballi <amarts@redhat.com>
* feature/bitrot: stub xlators opts for GD2Kotresh HR2017-11-171-0/+5
| | | | | | Updates #302 Change-Id: I320eabf0c83295e90a312316a8373ccf5bf91dc4 Signed-off-by: Kotresh HR <khiremat@redhat.com>
* features/bitrot: Fix coverity issuesKotresh HR2017-11-096-22/+40
| | | | | | | | | | | | | 1. br_update_scrub_finish_time: BUFFER_SIZE_WARNING 2. br_read_bad_object_dir : DEADCODE 3. bit-rot.c: init : RESOURCE_LEAK 4. br_stub_fsetxattr : STACK_USE 5. br_stub_setxattr : STACK_USE 6. bit-rot-stub.c: init : BUFFER_SIZE_WARNING Change-Id: Ie620f431bd7548fedae2152aa756ccdcd89ddf89 Signed-off-by: Kotresh HR <khiremat@redhat.com> BUG: 789278
* xlator/bitrot: flood of -Wformat-truncation warnings with gcc-7.1Kaleb S. KEITHLEY2017-10-043-70/+26
| | | | | | | | | | | | | | | | Starting in Fedora 26 which has gcc-7.1.x, -Wformat-trunction is enabled with -Wformat, resulting in a flood of new warnings. This many warnings is a concern because it makes it hard(er) to see other warnings that should be addressed. An example is at https://kojipkgs.fedoraproject.org//packages/glusterfs/3.12.0/1.fc28/data/logs/x86_64/build.log For more info see https://review.gluster.org/#/c/18267/ Change-Id: I7792d94da1e8109f3aaa857a94be40f2d2402684 BUG: 1492851 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com>
* gfapi: Duplicate the buffer sent in setxattr callsPoornima G2017-08-071-1/+1
| | | | | | | | | | | | | | | | | | | | | Issue: The caller of glfs_setxattr sends a buffer to set as the value. We create a dict in which the pointer to the value is set. Underlying layers like md-cache take a ref on this dict to store the value for a longer time. But the moment setxattr is complete, the caller of glfs_setxattr can free the value memory. Solution: memcpy the setxattr value to the gluster buffer. Change-Id: I58753fe702e8b7d0f6c4f058714c65d0ad5d7a0a BUG: 1477488 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: https://review.gluster.org/17967 Reviewed-by: soumya k <skoduri@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us>
* libglusterfs: Name threads on creationRaghavendra Talur2017-07-193-8/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Set names to threads on creation for easier debugging. Output of top -H -p <PID-OF-GLUSTERFSD> Before: 19773 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19774 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19775 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19776 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19777 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19778 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19779 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19780 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19781 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19782 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19783 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19784 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19785 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.01 glusterfsd 19786 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.01 glusterfsd 19787 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.01 glusterfsd 19789 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19790 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 25178 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 5398 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 7881 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd After: 19773 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19774 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glustertimer 19775 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterfsd 19776 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glustermemsweep 19777 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glustersproc0 19778 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glustersproc1 19779 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterepoll0 19780 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusteridxwrker 19781 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusteriotwr0 19782 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterbrssign 19783 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterbrswrker 19784 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterclogecon 19785 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.01 glusterclogd0 19786 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.01 glusterclogd1 19787 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.01 glusterclogd2 19789 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterposixjan 19790 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterposixfsy 25178 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterepoll1 5398 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterepoll2 7881 root 20 0 1301.3m 12.6m 8.4m S 0.0 0.1 0:00.00 glusterposixhc Change-Id: Id5f333755c1ba168a2ffaa4fce6e71c375e10703 BUG: 1254002 Updates: #271 Signed-off-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-on: https://review.gluster.org/11926 Reviewed-by: Prashanth Pai <ppai@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* feature/bitrot: Fix ondemand scrubKotresh HR2017-06-162-6/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | The flag which keeps tracks of whether the scrub frequency is changed from previous value should not be considered for on-demand scrubbing. It should be considered only for 'scrub-frequency' where it should not be re-scheduled if it is set to same value again. But in case ondemand scrub, it should start the scrub immediately no matter what the scrub-frequency. Reproducer: 1. Enable bitrot 2. Set scrub-throttle 3. Set ondemand scrub Make sure glusterd is not restarted while doing below steps Change-Id: Ice5feaece7fff1579fb009d1a59d2b8292e23e0b BUG: 1461845 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: https://review.gluster.org/17552 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* glusterfs: Not able to mount running volume after enable brick mux and ↵Mohit Agrawal2017-05-311-0/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | stopped any volume Problem: After enabled brick mux if any volume has down and then try ot run mount with running volume , mount command is hung. Solution: After enable brick mux server has shared one data structure server_conf for all associated subvolumes.After down any subvolume in some ungraceful manner (remove brick directory) posix xlator sends GF_EVENT_CHILD_DOWN event to parent xlatros and server notify updates the child_up to false in server_conf.When client is trying to communicate with server through mount it checks conf->child_up and it is FALSE so it throws message "translator are not yet ready". From this patch updated structure server_conf to save child_up status for xlator wise. Another improtant correction from this patch is cleanup threads from server side xlators after stop the volume. BUG: 1453977 Change-Id: Ic54da3f01881b7c9429ce92cc569236eb1d43e0d Signed-off-by: Mohit Agrawal <moagrawa@redhat.com> Reviewed-on: https://review.gluster.org/17356 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra Talur <rtalur@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us>
* features/bitrot: Fix glusterfsd crashKotresh HR2017-05-291-8/+15
| | | | | | | | | | | | | | | | | | With object versioning being optional, it can so happen the bitrot stub context is not always set. When it's not found, it's initialized. But was not being assigned to use in the local function. This was leading for brick crash. Fixed the same. Change-Id: I0dab6435cdfe16a8c7f6a31ffec1a370822597a8 BUG: 1454317 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: https://review.gluster.org/17357 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com>
* core: make the per glusterfs_ctx_t timer-wheel refcountedNiels de Vos2017-05-011-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | xlators can use a 'global' timer-wheel for scheduling events. This timer-wheel is managed per glusterfs_ctx_t, but does not need to be allocated for every graph. When an xlator wants to use the timer-wheel, it will be instanciated on demand, and provided to xlators that request it later on. By adding a reference counter to the glusterfs_ctx_t for the timer-wheel, the threads and structures can be cleaned up when the last xlator does not have a need for it anymore. In general, the xlators request the timer-wheel in init(), and they should return it in fini(). Because the timer-wheel is managed per glusterfs_ctx_t, the functions can be added to ctx.c and do not need to live in their very minimal tw.[ch] files. Change-Id: I19d225b39aaa272d9005ba7adc3104c3764f1572 BUG: 1442788 Reported-by: Poornima G <pgurusid@redhat.com> Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: https://review.gluster.org/17068 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Zhou Zhengping <johnzzpcrystal@gmail.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* libglusterfs/stack.h: reduce duplication of codeAmar Tumballi2017-04-271-5/+5
| | | | | | | | | | | | | | | | * Use STACK_UNWIND_STRICT everywhere. * Provide STACK_WIND_COMMON as both STACK_WIND_COOKIE and STACK_WIND differ by just 1 line and 1 option. Updates gluster/glusterfs#137 Change-Id: Ifbb6b9c4702b02f4a02834824f509fd10c78f0ce Signed-off-by: Amar Tumballi <amarts@redhat.com> Reviewed-on: https://review.gluster.org/16915 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us>
* features/bit-rot-stub: bring in optional versioningRaghavendra Bhat2017-04-183-57/+290
| | | | | | | | | | | | | | | | * As of now bit-rot-stub does versioning always. This leads lots of getxattr calls being made in lookups. So make object versioning optional. Change-Id: I83713e45ae59fb28004bb3cfa008f2d69edebbfa BUG: 1359599 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: https://review.gluster.org/14442 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* features/bit-rot-stub: use the correct spelling of quarantine for bad objectsRaghavendra Bhat2017-01-303-5/+20
| | | | | | | | | | | | | | | | container The directory for containing the list of bad objects was named "quanrantine" instead of "quarantine" Change-Id: I8c20381ac637201d9d1a224f5223e8dfbed53f1e BUG: 1401571 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: https://review.gluster.org/16027 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kotresh HR <khiremat@redhat.com>
* trivial: correct some spelling mistakes in comments and logsNiels de Vos2016-10-181-1/+1
| | | | | | | | | | | | | | BUG: 1385593 Change-Id: Icfae9e557a284182c6c22e9606fdd641528906f0 Reported-by: Patrick Matthäi <pmatthaei@debian.org> Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/15656 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: jiffin tony Thottan <jthottan@redhat.com> Reviewed-by: Kotresh HR <khiremat@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org>
* build: out-of-tree builds generates files in the wrong directoryKaleb S KEITHLEY2016-09-182-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | And minor cleanup of a few of the Makefile.am files while we're at it. Rewrite the make rules to do what xdrgen does. Now we can get rid of xdrgen. Note 1. netbsd6's sed doesn't do -i. Why are we still running smoke tests on netbsd6 and not netbsd7? We barely support netbsd7 as it is. Note 2. Why is/was libgfxdr.so (.../rpc/xdr/src/...) linked with libglusterfs? A cut-and-paste mistake? It has no references to symbols in libglusterfs. Note3. "/#ifndef\|#define\|#endif/" (note the '\'s) is a _basic_ regex that matches the same lines as the _extended_ regex "/#(ifndef|define|endif)/". To match the extended regex sed needs to be run with -r on Linux; with -E on *BSD. However NetBSD's and FreeBSD's sed helpfully also provide -r for compatibility. Using a basic regex avoids having to use a kludge in order to run sed with the correct option on OS X. Note 4. Not copying the bit of xdrgen that inserts copyright/license boilerplate. AFAIK it's silly to pretend that machine generated files like these can be copyrighted or need license boilerplate. The XDR source files have their own copyright and license; and their copyrights are bound to be more up to date than old boilerplate inserted by a script. From what I've seen of other Open Source projects -- e.g. gcc and its C parser files generated by yacc and lex -- IIRC they don't bother to add copyright/license boilerplate to their generated files. It appears that it's a long-standing feature of make (SysV, BSD, gnu) for out-of-tree builds to helpfully pretend that the source files it can find in the VPATH "exist" as if they are in the $cwd. rpcgen doesn't work well in this situation and generates files with "bad" #include directives. E.g. if you `rpcgen ../../../../$srcdir/rpc/xdr/src/glusterfs3-xdr.x`, you get an #include directive in the generated .c file like this: ... #include "../../../../$srcdir/rpc/xdr/src/glusterfs3-xdr.h" ... which (obviously) results in compile errors on out-of-tree build because the (generated) header file doesn't exist at that location. Compared to `rpcgen ./glusterfs3-xdr.x` where you get: ... #include "glusterfs3-xdr.h" ... Which is what we need. We have to resort to some Stupid Make Tricks like the addition of various .PHONY targets to work around the VPATH "help". Warning: When doing an in-tree build, -I$(top_builddir)/rpc/xdr/... looks exactly like -I$(top_srcdir)/rpc/xdr/... Don't be fooled though. And don't delete the -I$(top_builddir)/rpc/xdr/... bits Change-Id: Iba6ab96b2d0a17c5a7e9f92233993b318858b62e BUG: 1330604 Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/14085 Tested-by: Niels de Vos <ndevos@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* feature/bitrot: Fix recovery of corrupted hardlinkKotresh HR2016-09-081-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: When a file with hardlink is corrupted in ec volume, the recovery steps mentioned was not working. Only name and metadata was healing but not the data. Cause: The bad file marker in the inode context is not removed. Hence when self heal tries to open the file for data healing, it fails with EIO. Background: The bitrot deletes inode context during forget. Briefly, the recovery steps involves following steps. 1. Delete the entry marked with bad file xattr from backend. Delete all the hardlinks including .glusters hardlink as well. 2. Access the each hardlink of the file including original from the mount. The step 2 will send lookup to the brick where the files are deleted from backend and returns with ENOENT. On ENOENT, server xlator forgets the inode if there are no dentries associated with it. But in case hardlinks, the forget won't be called as dentries (other hardlink files) are associated with the inode. Hence bitrot stube won't delete it's context failing the data self heal. Fix: Bitrot-stub should delete the inode context on getting ENOENT during lookup. Change-Id: Ice6adc18625799e7afd842ab33b3517c2be264c1 BUG: 1373520 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/15408 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com>
* bit-rot: fix unused variable warnings/errorsKaleb S. KEITHLEY2016-08-291-7/+2
| | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a/the "leak" - via the generated rpc/xdr headers - of pragmas that mask these warnings. However 14085 won't pass the smoke test until all the warnings are fixed. Change-Id: I566fcbcae5aec575bfca40975b941c53546d4d97 BUG: 1369124 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15245 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kotresh HR <khiremat@redhat.com>
* feature/bitrot: Ondemand scrub option for bitrotKotresh HR2016-08-256-13/+97
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The bitrot scrubber takes 'hourly/daily/biweekly/monthly' as the values for 'scrub-frequency'. There is no way to schedule the scrubbing when the admin wants it. Ondemand scrubbing brings in the new option 'ondemand' with which the admin can start scrubbing ondemand. It starts the scrubbing immediately. Ondemand scrubbing is successful only if the scrubber is in 'Active (Idle)' (waiting for it's next frequency cycle to start scrubbing). It is not entertained when the scrubber is in 'Paused' or already running. Here is the command line syntax. gluster volume bitrot <vol name> scrub ondemand Change-Id: I84c28904367eed827a7dae8d6a535c14b28e9f4d BUG: 1366195 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/15111 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* eventsapi: Fix disable-events issueAravinda VK2016-08-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | Events related sources are not loaded in libglusterfs when configure is run with --disable-events option. Due to this every call of gf_event should be guarded with USE_EVENTS macro. To prevent this, USE_EVENTS macro was included in events.c itself(Patch #15054) Instead of disabling building entire directory "events", selectively disabled the code. So that constants and empty function gf_event is exposed. Code will not fail even if gf_event is called when events is disabled. BUG: 1368042 Change-Id: Ia6abfe9c1e46a7640c4d8ff5ccf0e9c30c87f928 Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/15198 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* eventsapi: Bitrot eventsKotresh HR2016-08-191-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Following Bitrot Events are added BITROT_ENABLE/BITROT_DISABLE { "nodeid": NODEID, "ts": TIMESTAMP, "event": EVENT_TYPE, "message": { "name": VOLUME_NAME, } } BITROT_SCRUB_THROTTLE/BITROT_SCRUB_FREQ/BITROT_SCRUB { "nodeid": NODEID, "ts": TIMESTAMP, "event": EVENT_TYPE, "message": { "name": VOLUME_NAME, "value": OPTION_VALUE } } EVENT_BITROT_BAD_FILE { "nodeid": NODEID, "ts": TIMESTAMP, "event": EVENT_TYPE, "message": { "gfid": GFID_OF_FILE, "brick": BRICK_ROOT, "path": FILE_PATH_FROM_BRICK_ROOT (if available) } } Change-Id: I8c37b0e9db9f4f0f3d05d8f78b5521c7db0e2237 BUG: 1367815 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/15190 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Aravinda VK <avishwan@redhat.com>
* feature/bitrot: Ignore files with sticky bit setKotresh HR2016-07-211-0/+8
| | | | | | | | | | | | | | | | Scrubber scrubs entries in backend. It is scrubbing files with sticky bit as well. This might include linkfiles which should be skipped. This patch adds the check to ignore linkfiles during scrub. Change-Id: Ic21367b37770d391326c55c659491a1e5a82335b BUG: 1355706 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/14903 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: NetBSD Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* feature/bitrot: Fix scrub status with sharded volumeKotresh HR2016-07-191-12/+26
| | | | | | | | | | | | | | | | | Bitrot scrubs each shard entries separately. Scrub statistics was counting each shard entry which is incorrect. This patch skips the statistics count for sharded entries. Change-Id: I184c315a4bc7f2cccabc506eef083ee926ec26d3 BUG: 1356851 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/14927 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* features/bitrot: Move throttling code to libglusterfsKotresh HR2016-07-187-391/+29
| | | | | | | | | | | | | | | Since throttling is a separate feature by itself, move throttling code to libglusterfs. Change-Id: If9b99885ceb46e5b1865a4af18b2a2caecf59972 BUG: 1352019 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/14846 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Ravishankar N <ravishankar@redhat.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* core: use readdir(3) with glibc, and associated cleanupKaleb S. KEITHLEY2016-07-181-14/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Starting with glibc-2.23 (i.e. what's in Fedora 25), readdir_r(3) is marked as deprecated. Specifically the function decl in <dirent.h> has the deprecated attribute, and now warnings are thrown during the compile on Fedora 25 builds. The readdir(_r)(3) man page (on Fedora 25 at least) and World+Dog say that glibc's readdir(3) is, and always has been, MT-SAFE as long as only one thread is accessing the directory object returned by opendir(). World+Dog also says there is a potential buffer overflow in readdir_r(). World+Dog suggests that it is preferable to simply use readdir(). There's an implication that eventually readdir_r(3) will be removed from glibc. POSIX has, apparently deprecated it in the standard, or even removed it entirely. Over and above that, our source near the various uses of readdir(_r)(3) has a few unsafe uses of strcpy()+strcat(). (AFAIK nobody has looked at the readdir(3) implemenation in *BSD to see if the same is true on those platforms, and we can't be sure of MacOS even though we know it's based on *BSD.) Change-Id: I5481f18ba1eebe7ee177895eecc9a80a71b60568 BUG: 1356998 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/14838 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Kotresh HR <khiremat@redhat.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* feature/bitrot: Show whether scrub is in progress/idleKotresh HR2016-07-113-13/+18
| | | | | | | | | | | | | | | | | Bitrot scrub status shows whether the scrub is paused or active. It doesn't show whether the scrubber is actually scrubbing or waiting in the timer wheel for the next schedule. This patch shows this status with "In Progress" and "Idle" respectively. Change-Id: I995d8553d1ff166503ae1e7b46282fc3ba961f0b BUG: 1352871 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/14864 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* features/bitrot: Option to set scrub interval to a minuteKotresh HR2016-07-052-0/+8
| | | | | | | | | | | | | | | | | | | | Bitrot scrub-frequency supports "hourly|daily|weekly|biweekly|monthly". But it is painful for testing as minimum scrub-interval is an hour Hence introducing a scrub interval of minute to ease testing. It is intentionally not exposed in bitrot command help as it is only for testing. e.g., gluster vol bitrot <volname> scrub-frequency minute Change-Id: I155a65298d3fad5ae9e529d9c7d4b0d25fa297c0 BUG: 1351537 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/14836 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* features/bitrot: Fix Compilation Warning!!!Kotresh HR2016-05-023-13/+13
| | | | | | | | | | | | | | | | | | | | Earlier the lock was using glusterfs macros LOCK/UNLOCK/LOCK_INIT/LOCK_DESTROY. The patch http://review.gluster.org/#/c/14140/ used 'pthread_cleanup_push' interface for the same lock which was giving "initialization discards qualifiers from pointer target type". It's strange that the build succeeded in master branch with no warnings but fails for the backport http://review.gluster.org/#/c/14140/ in 3.7 branch treating this warning as error. Change-Id: I75c8a65a2bfb1147fe9a84cfd8f09a97c089ae70 BUG: 1332134 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/14146 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* features/bitrot: Introduce scrubber monitor threadKotresh HR2016-05-0110-317/+690
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch does following changes. 1. Introduce scrubber monitor thread. 2. Move scrub status related APIs to separate file and make part of libbitrot library. Problem: Earlier, each child of the scrubber was maintaining the state machine and hence there was no way to track the start and end time of scrubbing as each brick has it's own start and end time. Also each brick was maintaining it's own timer wheel instance. It was also not possible to get scrubbed files count per session as we could not get last child which finishes scrubbing to reset it to zero. Solution: Introduce scrubber monitor thread. It does following. 1. Maintains the scrubber state machine. Earlier each child had it's own state machine. Now, only monitor maintains on behalf of all it's children. 2. Maintains the timer wheel instance. Earlier each child had it's own timer wheel instance. Now, only monitor maintains on behalf of all it's children. As a result, we can track the scrub statistics easily and correctly. Change-Id: Ic6e34ffa57984bd7a5ee81f4e263342bc1d9b302 BUG: 1329211 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/14044 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* features/bit-rot-stub: get frame->local before unwindingRaghavendra Bhat2016-03-091-3/+5
| | | | | | | | | | | | | | | | | | In bit-rot-stub, if unlink fails, then it was unwinding directly. Then it was trying to cleanup local. But local would be NULL, since it was unwinding directly without getting the value of frame->local. The NULL cleanup of local was causing the brick process to crash. Change-Id: I8544ba73b2e8dc0c50b1a53ff8027d85588d087b BUG: 1315465 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/13628 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kotresh HR <khiremat@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* features/bitrot: do not remove the quarantine handle in forgetRaghavendra Bhat2016-02-291-8/+96
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If an object is marked as bad, then an entry is corresponding to the bad object is created in the .glusterfs/quarantine directory to help scrub status. The entry name is the gfid of the corrupted object. The quarantine handle is removed in below 2 cases. 1) When protocol/server revceives the -ve lookup on an entry whose inode is there in the inode table (it can happen when the corrupted object is deleted directly from the backend for recovery purpose) it sends a forget on the inode and bit-rot-stub removes the quarantine handle in upon getting the forget. refer to the below commit f853ed9c61bf65cb39f859470a8ffe8973818868: http://review.gluster.org/12743) 2) When bit-rot-stub itself realizes that lookup on a corrupted object has failed with ENOENT. But with step1, there is a problem when the bit-rot-stub receives forget due to lru limit exceeding in the inode table. In such cases, though the corrupted object is not deleted (either from the mount point or from the backend), the handle in the quarantine directory is removed and that object is not shown in the bad objects list in the scrub status command. So it is better to follow only 2nd step (i.e. bit-rot-stub removing the handle from the quarantine directory in -ve lookups). Also the handle has to be removed when a corrupted object is unlinked from the mount point itself. Change-Id: Ibc3bbaf4bc8a5f8986085e87b729ab912cbf8cf9 BUG: 1308961 Original author: Raghavendra Bhat <raghavendra@redhat.com> Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/13472 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* all: fixes for clang compile warningsKaleb S KEITHLEY2016-02-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | cli/src/cli-cmd-parser.c (chenk) cli/src/cli-xml-output.c (spandit) cli/src/cli.c (chenk) libglusterfs/src/common-utils.c (vmallika) libglusterfs/src/gfdb/gfdb_sqlite3.c (jfernand +1) rpc/rpc-transport/socket/src/socket.c (?) xlators/cluster/afr/src/afr-transaction.c (?) xlators/cluster/dht/src/dht-common.h (srangana +2) xlators/cluster/dht/src/dht-selfheal.c (srangana +2) xlators/debug/io-stats/src/io-stats.c (R. Wareing) xlators/features/barrier/src/barrier.c (vshastry) xlators/features/bit-rot/src/bitd/bit-rot-scrub.h (vshankar +1) xlators/features/shard/src/shard.c (kdhananj +1) xlators/mgmt/glusterd/src/glusterd-ganesha.c (skoduri) xlators/mgmt/glusterd/src/glusterd-handler.c (atinmu) xlators/mgmt/glusterd/src/glusterd-op-sm.h (atinmu) xlators/mgmt/glusterd/src/glusterd-snapshot.c (spandit) xlators/mgmt/glusterd/src/glusterd-syncop.c (atinmu) xlators/mgmt/glusterd/src/glusterd-volgen.c (atinmu) xlators/protocol/client/src/client-messages.h (mselvaga +1) xlators/storage/bd/src/bd-helper.c (M. Mohan Kumar) xlators/storage/bd/src/bd.c (M. Mohan Kumar) xlators/storage/posix/src/posix.c (nbalacha +1) Change-Id: I85934fbcaf485932136ef3acd206f6ebecde61dd BUG: 1293133 Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/13031 CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* all: fix various cppcheck warningsKaleb S KEITHLEY2016-02-151-0/+1
| | | | | | | | | | | | | | | fixes for various warnings reported by cppcheck N.B. cppcheck output is in the bugzilla Change-Id: I33acec127bc4536935fdd8d52a0c490ec54d50b2 BUG: 1292954 Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/13006 Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* features / bitrot: Prevent spurious pthread_cond_wait() wakeupVenky Shankar2016-01-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | pthread_cond_wait() is prone to spurious wakeups and it's utmost necessarry to check a boolean predicate for thread continuation. See man(3) pthread_cond_wait() for details. The following is done in bitrot scrubber: if (list_empty (&fsscrub->scrublist)) pthread_cond_wait (&fsscrub->cond, &fsscrub->mutex); followed by: list_first_entry (&fsscrub->scrublist, ...) A spurious wakeup from pthread_cond_wait() with the absence of list_empty() check causes list_first_entry() to return garbage. Change-Id: I08786b9686b5503fcad6127e4c2a2cfac4bb7849 BUG: 1302201 Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/13302 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* features/bitrot: add check for corrupted object in f{stat}Venky Shankar2016-01-101-32/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | Check for corrupted objects is done bt bitrot stub component for data operations and such fops are denied processing by returning EIO. These checks were not done for operations such as get/set extended attribute, stat and the likes - IOW, stub only blocked pure data operations. However, its necessary to have these checks for certain other fops, most importantly stat (and fstat). This is due to the fact that clients could possibly get stale stat information (such as size, {a,c,m}time) resulting in incorrect operation of the application that rely on these fields. Note that, the data that replication would take care of fetching good (and correct) data, but the staleness of stat information could lead to data inconsistencies (e.g., rebalance, tier). Change-Id: I5a22780373b182a13f8d2c4ca6b7d9aa0ffbfca3 BUG: 1296399 Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/13120 Reviewed-by: Kotresh HR <khiremat@redhat.com> Reviewed-by: mohammed rafi kc <rkavunga@redhat.com> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* features/bitrot: Fail node-uuid getxattr if file is marked badKotresh HR2016-01-071-0/+22
| | | | | | | | | | | | | | | If xattr is node-uuid and the inode is marked bad, fail getxattr and fgetxattr with EIO. Returning EIO would result in AFR to choose correct node-uuid coresponding to the subvolume where the good copy of the file resides. Change-Id: I45a42ca38f8322d2b10f3c4c48dc504521162b42 BUG: 1294786 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/13116 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* build: export minimum symbols from xlators for correct resolutionKaleb S KEITHLEY2015-12-222-2/+2
| | | | | | | | | | | | | | | | | | | | | | Revisiting http://review.gluster.org/#/c/11814/, which unintentionally introduced warnings from libtool about the xlator .so names. According to [1], the -module option must appear in the Makefile.am file(s); if -module is defined in a macro, e.g. in configure(.ac), then libtool will not recognize that this is a module and will emit a warning. [1] http://www.gnu.org/software/automake/manual/automake.html#Libtool-Modules Change-Id: Ifa5f9327d18d139597791c305aa10cc4410fb078 BUG: 1248669 Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/13003 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: soumya k <skoduri@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* core: add preadv, pwritev, pread, pwrite syscall wrappersKaleb S KEITHLEY2015-12-221-2/+2
| | | | | | | | | | | | | add additional system calls plus pick up a couple missed unwrapped system calls that seem to have slipped into the master branch. Change-Id: If268ccd5e9a139ac3ffd38293c67cd2f62ea5b58 BUG: 1289258 Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/12895 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* afr: handle bad objects during lookup/inode_refreshRavishankar N2015-12-201-0/+57
| | | | | | | | | | | | | | | | | If an object (file) is marked bad by bitrot, do not consider the brick on which the object is present as a potential read subvolume for AFR irrespective of the pending xattr values. Also do not consider the brick containing the bad object while performing afr_accuse_smallfiles(). Otherwise if the bad object's size is bigger, we may end up considering that as the source. Change-Id: I4abc68e51e5c43c5adfa56e1c00b46db22c88cf7 BUG: 1290965 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/12955 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* features/bit-rot-stub: delete the link for bad object in quarantine directoryRaghavendra Bhat2015-12-164-2/+95
| | | | | | | | | | | | | | | | | | When the bad object is deleted (as of now manually from the backend itself), along with its gfid handle, the entry for the bad object in the quarantne directory is left as it is (it also can be removed manually though). But the next lookup of the object upon not finding it in the backend, sends forget on the in-memory inode. If the stale link for the gfid still exists in the quarantine directory, bir-rot-stub will unlink the entry in its forget or in the next failed lookup on that object with errno being ENOENT. Change-Id: If84292d3e44707dfa11fa29023b3d9f691b8f0f3 BUG: 1285241 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/12743 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* bitrot: getting correct value of scrub stat'sGaurav Kumar Garg2015-12-143-20/+187
| | | | | | | | | | | | | | | | | | | When user execute bitrot scrub status command then gluster is not giving correct value of Number of Scrubbed files, Number of Unsigned files, Last completed scrub time, Duration of last scrub. With this patch scrub status will give correct value for all the above fields. Change-Id: Ic966f76d22db5b0c889e6386a1c2219afbda1f49 BUG: 1285989 Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/12776 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* features/bit-rot: Fix NULL dereferencePranith Kumar K2015-11-261-4/+10
| | | | | | | | | | | | | | | | | | Problem: By the time br_stub_worker is accessing this->private in it's thread, 'init' may not have set 'this->private = priv'. This leads to NULL dereference leading to brick crash. Fix: Set this->private before launching these threads. Change-Id: Ic797eb195fdd0c70d19f28d0b97bc0181fd3dd2f BUG: 1285616 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/12754 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Venky Shankar <vshankar@redhat.com>
generated by cgit (git 2.34.1) at 2024-05-08 04:13:58 +0000