summaryrefslogtreecommitdiffstats
path: root/xlators/features/Makefile.am
Commit message (Collapse)AuthorAgeFilesLines
* all: remove dead translatorsJeff Darcy2016-11-291-2/+2
| | | | | | | | | | | | | | | | | | | | | The following have been completely removed from the source tree, makefiles, configure script, and RPM specfile. cluster/afr/pump cluster/ha cluster/map features/filter features/mac-compat features/path-convertor features/protect Change-Id: I2f966999ac3c180296ff90c1799548fba504f88f Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/15906 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* xlators/ganesha : Remove the ganesha xlator code entirely from sourceJiffin Tony Thottan2016-08-041-1/+1
| | | | | | | | | | | | | | | | | ganesha xlator is dummy xlator which introduced as part of cli options. But all the ganesha related cli commands are handled from glusterd only. There is no point in keeping this xlator. Hence removing the same since it does not have any role in NFS-Ganesha intergration with gluster Change-Id: Id438d2fabd3afe7e91ae26522df8495c8e9e9308 BUG: 1361999 Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> Reviewed-on: http://review.gluster.org/15055 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: soumya k <skoduri@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* Leases: Add a server side xlator to handle lease requestsPoornima G2016-04-291-1/+1
| | | | | | | | | | | | | | | | | Before this patch, there was an effort to implement leases in upcall xlator, these patches by Soumya and me can be found @ http://review.gluster.org/#/c/10084/ Change-Id: I926728c7ec690727a8971039b240655882d02059 BUG: 1319992 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/11643 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* qemu-block: deprecated/defunct, remove from treeKaleb S KEITHLEY2016-03-071-2/+2
| | | | | | | | | | | | | | | | | qemu-block xlator is not used by anyone, or so I'm told. It's also substantially out of date. There's little reason to keep it in our sources. (And FedoraProject doesn't like bundled software either.) Change-Id: I4aeb2fdfd962ec6d93de6bae126874121272220a Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/13473 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* experimental: add fdl (Full Data Logging) translatorJeff Darcy2016-02-131-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | NSR needs logging that is different than our existing changelog in several ways: * Full data, not just metadata * Pre-op, not post-op * High performance * Supports the concept of time-bounded "terms" Others (for example EC) might need the same thing. This patch adds such a translator. It also adds code to dump the resulting journals, and to replay them using syncops, plus (very rudimentary) tests for all of the above. Change-Id: I29680a1b4e0a9e7d5a8497fef302c46434b86636 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/12450 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* Bitrot StubVenky Shankar2015-03-241-1/+1
| | | | | | | | | | | | | Bitrot stub implements object versioning required for identifying signature freshness. More details about versioning is explained as a part of the "bitrot feature documentation" patch. Change-Id: I2ad70d9eb109ba4a12148ab8d81336afda529ad9 BUG: 1170075 Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/9709 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* features/shard: Introducing sharding translatorKrutika Dhananjay2015-03-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Based on the high-level design by Anand V. Avati which can be found @ https://gist.github.com/avati/af04f1030dcf52e16535#sharding-xlator-stripe-20 Still to-do: * complete implementation of inode write fops - [f]truncate, zerofill, fallocate, discard * introduce transaction mechanism in inode write fops * complete readv * Handle open with O_TRUNC * Handle unlinking of all shards during unlink/rename * Compute total ia_size and ia_blocks in lookup, readdirp, etc * wind fsync/flush on all shards Note: Most of the items above are related. Once we come up with a clean way to determine the last shard/shard count for a file/file size and the mgmt of sparse regions of the file, implementing them becomes trivial. Change-Id: Id871379b53a4a916e4baa2e06f197dd8c0043b0f BUG: 1200082 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/9841 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* afr: arbiter xlatorRavishankar N2015-03-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds the arbiter translator into the tree. This is a server side xlator used for replica 3 volumes. It sits above posix and will be loaded on the 3rd (last) brick of every afr subvolume in a replica 3 configuration. It intercepts inode read/write operations: reads are unwound with ENOTCONN, inode writes are unwound with success without actually passing them down to posix. Metadata operations are allowed to pass through. The CLI for creating a 3 way replica with arbiter is also added but kept disabled (A 'normal' 3 way replica is created instead). This patch is a part of the arbiter logic implementation for 3 way AFR, details of which can be found at http://review.gluster.org/#/c/9656/ Change-Id: I395b81f49d5da52c466daf5c8518f1bbad9c16fa BUG: 1199985 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/9840 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Adding ChangeTimeRecorder(CTR) Xlator to GlusterFSJoseph Fernandes2015-03-191-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ********************************************************************** ChangeTimeRecorder(CTR) Xlator | ********************************************************************** ChangeTimeRecorder(CTR) is server side xlator(translator) which sits just above posix xlator. The main role of this xlator is to record the access/write patterns on a file residing the brick. It records the read(only data) and write(data and metadata) times and also count on how many times a file is read or written. This xlator also captures the hard links to a file(as its required by data tiering to move files). CTR Xlator is the consumer of libgfdb. To Enable/Disable CTR Xlator: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ gluster volume set <volume-name> features.ctr-enabled {on/off} To Enable/Disable Frequency Counter Recording in CTR Xlator: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ gluster volume set <volume-name> features.record-counters {on/off} Change-Id: I5d3cf056af61ac8e3f8250321a27cb240a214ac2 BUG: 1194753 Signed-off-by: Joseph Fernandes <josferna@redhat.com> Reviewed-on: http://review.gluster.org/9935 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* NFS-Ganesha: Volume set option for managing NFS-Ganesha exports.Meghana Madhusudhan2015-03-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | A dummy translator has been introduced as a place holder for functions related to managing NFS-Ganesha exports. A volume set option is introduced to manage volume level exports. gluster vol set <volname> ganesha.enable ON/OFF 1. gluster volume set <volname> ganesha.enable ON It creates the export config file with a unique export ID. Sends a DBus signal to export this volume dynamically. 2. gluster vol set <volname> ganesha.enable OFF Unexports the specific volume. Deletes the specfic config file related to the volume. This change also removes the handling of the older keys "nfs-ganesha.enable" and "nfs-ganesha.host" Change-Id: I8d4a0b542326a6a0c8e4711600b106274d666587 BUG: 1188184 Signed-off-by: Meghana Madhusudhan <mmadhusu@redhat.com> Reviewed-on: http://review.gluster.org/9585 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* Upcall: New xlator to store various states and send cbk eventsSoumya Koduri2015-03-171-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Framework on the server-side, to handle certain state of the files accessed and send notifications to the clients connected. A generic and extensible framework, used to maintain states in the glusterfsd process for each of the files accessed (including the clients info doing the fops) and send notifications to the respective glusterfs clients incase of any change in that state. This patch handles "Inode Update/Invalidation" upcall event. Feature page: URL: http://www.gluster.org/community/documentation/index.php/Features/Upcall-infrastructure Below link has a writeup which explains the code changes done - URL: https://soumyakoduri.wordpress.com/2015/02/25/glusterfs-understanding-upcall-infrastructure-and-cache-invalidation-support/ Change-Id: Ie3d724be9a3419fcf18901a753e8ec2df2ac802f BUG: 1200262 Signed-off-by: Soumya Koduri <skoduri@redhat.com> Reviewed-on: http://review.gluster.org/9535 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* Features/trash : Combined patches for trash translatorAnoop C S2015-03-161-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | This is the combined patch set for supporting trash feature. http://www.gluster.org/community/documentation/index.php/Features/Trash Current patch includes the following features: * volume set options for enabling trash globally and exclusively for internal operations like self-heal and re-balance * volume set options for setting the eliminate path, trash directory path and maximum trashable file size. * test script for checking the functionality of the feature * brief documentation on different aspects of trash feature. Change-Id: Ic7486982dcd6e295d1eba0f4d5ee6d33bf1b4cb3 BUG: 1132465 Signed-off-by: Anoop C S <achiraya@redhat.com> Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> Reviewed-on: http://review.gluster.org/8312 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* user servicable snapshotsRaghavendra Bhat2014-05-291-1/+1
| | | | | | | | | | Change-Id: Idbf27dbe088e646a8ab81cedc5818413795895ea Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Signed-off-by: Anand Subramanian <anands@redhat.com> Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/7700 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* features/barrier: add barrier translatorVarun Shastry2014-04-071-1/+1
| | | | | | | | | | | | | | gluster feature page: http://www.gluster.org/community/documentation/index.php/Features/Server-side_Barrier_feature Change-Id: Ia9f8802a54d1ffbd1cf789b80f5d30819bf65f64 BUG: 1060002 Signed-off-by: Varun Shastry <vshastry@redhat.com> Reviewed-on: http://review.gluster.org/6928 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* features/compress: Compression/DeCompression translatorPrashanth Pai2013-11-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * When a writev call occurs, the client compresses the data before sending it to server. On the server, compressed data is decompressed. Similarly, when a readv call occurs, the server compresses the data before sending it to client. On the client, the compressed data is decompressed. Thus the amount of data sent over the wire is minimized. * Compression/Decompression is done using Zlib library. * During normal operation, this is the format of data sent over wire : <compressed-data> + trailer(8) The trailer contains the CRC32 checksum and length of original uncompressed data. This is used for validation. HOW TO USE ---------- Turning on compression xlator: gluster volume set <vol_name> compress on Configurable options: gluster volume set <vol_name> compress.compression-level 8 gluster volume set <vol_name> compress.min-size 50 Change-Id: Ib7a66b6f1f70fe002b7c513588cdf75c69370805 BUG: 923540 Original-author : Venky Shankar <vshankar@redhat.com> Signed-off-by: Venky Shankar <vshankar@redhat.com> Signed-off-by: Prashanth Pai <nullpai@gmail.com> Signed-off-by: Prashanth Pai <ppai@redhat.com> Reviewed-on: http://review.gluster.org/3251 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* features/qemu-block: support for QCOW2 and QED formatsAnand Avati2013-09-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for internals snapshots using QCOW2 and general framework for external snapshots (next patch) with QCOW2 and QED. For internal snapshots, the file must be "initialized" or "formatted" into QCOW2 format, and specify a file size. Snapshots can be created, deleted, and applied ("goto"). e.g: // Format and Initialize sh# setfattr -n trusted.glusterfs.block-format -v qcow2:10GB /mnt/imgfile sh# ls -l /mnt/imgfile -rw-r--r-- 1 root root 10G Jul 18 21:20 imgfile // Create a snapshot sh# setfattr -n trusted.glusterfs.block-snapshot-create -v name1 imgfile // Apply a snapshot sh# setfattr -n trusted.gluterfs.block-snapshot-goto -v name1 imgfile Change-Id: If993e057a9455967ba3fa9dcabb7f74b8b2cf4c3 BUG: 986775 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/5367 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
* gfid-access: virtual access to filesystem through gfid pathAmar Tumballi2013-08-211-1/+1
| | | | | | | | | BUG: 952029 Change-Id: I7405d473d369a4a951836eceda4faccbad19ce0e Signed-off-by: Amar Tumballi <amarts@redhat.com> Reviewed-on: http://review.gluster.org/5497 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* features/changelog: changelog translatorAvra Sengupta2013-07-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the initial version of the Changelog Translator. What is it ----------- Goal is to capture changes performed on a GlusterFS volume. The translator needs to be loaded on the server (bricks) and captures changes in a plain text file inside a configured directory path (controlled by "changelog-dir", should be somewhere in <export>/.glusterfs/changelog by default). Changes are classified into 3 types: - Data: : TYPE-I - Metadata : TYPE-II - Entry : TYPE-III Changelog file is rolled over after a certain time interval (defauls to 60 seconds) after which a changelog is started. The thing to be noted here is that for a time interval (time slice) multiple changes for an inode are recorded only once (ie. say for 100+ writes on an inode that happens within the time slice has only a single corresponding entry in the changelog file). That way we do not bloat up the changelog and also save lots of writes. Changelog Format ----------------- TYPE-I and TYPE-II changes have the gfid on the entity on which the operation happened. TYPE-III being a entry op requires the parent gfid and the basename. Changelog format has been kept to a minimal and it's upto the consumers to do the heavy loading of figuring out deletes, renames etc.. A single changelog file records all three types of changes, with each change starting with an identifier ("D": DATA, "M": METADATA and "E": ENTRY). Option is provided for the encoding type (See TUNABLES). Consumers ---------- The only consumer as of today would be geo-replication, although backup utilities, self-heal, bit-rot detection could be possible consumers in the future. CLI ---- By default, change-logging is disabled (the translator is present in the server graph but does nothing). When enabled (via cli) each brick starts to log the changes. There are a set of tunable that can be used to change the translators behaviour: - enable/disable changelog (disabled by default) gluster volume set <volume> changelog {on|off} - set the logging directory (<brick>/.glusterfs/changelogs is the default) gluster volume set <volume> changelog-dir /path/to/dir - select encoding type (binary (default) or ascii) gluster volume set <volume> encoding {binary|ascii} - change the rollover time for the logs (60 secs by default) gluster volume set <volume> rollover-time <secs> - when secs > 0, changelog file is not open()'d with O_SYNC flag - and fsync is trigerred periodically every <secs> seconds. gluster volume set <volume> fsync-interval <secs> features/changelog: changelog consumer library (libgfchangelog) A shared library is provided for the consumer of the changelogs for easy acess via APIs. Application can link against this library and request for changelog updates. Conversion of binary logs to human-readable ascii format is also taken care by the library which keeps a copy of the changelog in application provided working directory. Change-Id: I75575fb7f1c53d2bec3dba1a329ea7bb3c628497 BUG: 847839 Original Author: Venky Shankar <vshankar@redhat.com> Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/5127 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glupy: Importing Jeff's glupy project into glusterfsRam Raja2013-05-101-1/+1
| | | | | | | | | | Change-Id: I3891ef6eaf6ede7c8cbedc3298ce2501a69b2b05 BUG: 961856 Original-author: Jeff Darcy <jdarcy@redhat.com> Signed-off-by: Ram Raja <rraja@redhat.com> Reviewed-on: http://review.gluster.org/4906 Reviewed-by: Justin Clift <jclift@redhat.com> Tested-by: Justin Clift <jclift@redhat.com>
* features: add a directory-protection translatorJeff Darcy2013-02-171-1/+2
| | | | | | | | | | | | | | | | | | | | | | This is useful to find all calls that remove a file from the protected directory, including renames and internal calls. Such calls will cause a stack trace to be logged. There's a filter script to add the needed translators, and then the new functionality can be invoked with one of the following commands. setfattr -n trusted.glusterfs.protect -v log $dir setfattr -n trusted.glusterfs.protect -v reject $dir setfattr -n trusted.glusterfs.protect -v anything_else $dir The first logs calls, but still allows them. The second rejects them with EPERM. The third turns off protection for that directory. Change-Id: Iee4baaf8e837106be2b4099542cb7dcaae40428c BUG: 888072 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/4496 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* core: adding extra data for fopsAmar Tumballi2012-03-221-1/+1
| | | | | | | | | | | | | with this change, the xlator APIs will have a dictionary as extra argument, which is passed between all the layers. This can be utilized for overloading in some of the operations. Change-Id: I58a8186b3ef647650280e63f3e5e9b9de7827b40 Signed-off-by: Amar Tumballi <amarts@redhat.com> BUG: 782265 Reviewed-on: http://review.gluster.com/2960 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* features/index: Index translator implementationPranith Kumar K2012-02-201-1/+1
| | | | | | | | | | Change-Id: If8a11ecbdd010f64fb4409add5751080f4b59086 BUG: 763820 Signed-off-by: Pranith Kumar K <pranithk@gluster.com> Reviewed-on: http://review.gluster.com/2722 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-by: Vijay Bellur <vijay@gluster.com>
* access-control: superseded by posix-acl translatorAnand Avati2011-07-081-1/+1
| | | | | | | Signed-off-by: Anand Avati <avati@gluster.com> BUG: 2815 (Server-enforced ACLs) URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=2815
* adding marker translatorJunaid2011-01-271-2/+2
| | | | | | | | | Signed-off-by: Junaid <junaid@gluster.com> Signed-off-by: Csaba Henk <csaba@gluster.com> Signed-off-by: Anand V. Avati <avati@dev.gluster.com> BUG: 2310 (georeplication) URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=2310
* features/quiesce: new translatorAmar Tumballi2010-09-291-1/+1
| | | | | | | | | | | | | | | | | 'Quiesce' is used to describe pausing or altering the state of running processes on a computer In GlusterFS context, this translator looks for CHILD_DOWN/CHILD_UP events, and will hold the requests for some time if the child node is in disconnected state current timeout is 20seconds, will be made tunable soon Signed-off-by: Amar Tumballi <amar@gluster.com> Signed-off-by: Vijay Bellur <vijay@dev.gluster.com> BUG: 1500 (Mount point should not be in-accessible between reconnect to server) URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=1500
* added features/mac-compatCsaba Henk2010-05-131-1/+1
| | | | | | | | Signed-off-by: Csaba Henk <csaba@gluster.com> Signed-off-by: Anand V. Avati <avati@dev.gluster.com> BUG: 800 (Problem on OSX with NFS and CIFS exports) URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=800
* access-control: Introduce new translatorShehjar Tikoo2010-03-311-1/+1
| | | | | | | | | | | | | The access control translator is required for performing permission checks on files and directories in line with posix conformance. This is required to be kept separate from storage/posix so that ACL support can also be later integrated into this translator. Signed-off-by: Shehjar Tikoo <shehjart@gluster.com> Signed-off-by: Anand V. Avati <avati@dev.gluster.com> BUG: 400 (Support auxiliary gids in GlusterFS) URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=400
* new 'features/read-only' module addedAmar Tumballi2010-03-241-1/+1
| | | | | | | | Signed-off-by: Amar Tumballi <amar@gluster.com> Signed-off-by: Anand V. Avati <avati@dev.gluster.com> BUG: 712 (mount.glusterfs script doesn't handle 'ro' option) URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=712
* iatt: configure.ac not to build filterAnand V. Avati2010-03-161-1/+1
| | | | | | | | Signed-off-by: Anand V. Avati <avati@blackhole.gluster.com> Signed-off-by: Anand V. Avati <avati@dev.gluster.com> BUG: 361 (GlusterFS 3.0 should work on Mac OS/X) URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=361
* Added all filesVikas Gorur2009-02-181-0/+3