| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Problem:
Locking schemes in afr-v1 were locking the directory/file completely during
self-heal. Newer schemes of locking don't require Full directory, file locking.
But afr-v2 still has compatibility code to work-well with older clients, where
in entry-self-heal it takes a lock on a special 256 character name which can't
be created on the fs. Similarly for data self-heal there used to be a lock on
(LLONG_MAX-2, 1). Old locking scheme requires heal info to take sh-domain locks
before examining heal-state. If it doesn't take sh-domain locks, then there is
a possibility of heal-info hanging till self-heal completes because of
compatibility locks. But the problem with heal-info taking sh-domain locks is
that if two heal-info or shd, heal-info try to inspect heal state in parallel
using trylocks on sh-domain, there is a possibility that both of them assuming
a heal is in progress. This was leading to spurious entries being shown in
heal-info.
Fix:
As long as there is afr-v1 way of locking, we can't fix this problem with
simple solutions. If we know that the cluster is running newer versions of
locking schemes, in those cases we can give accurate information in heal-info.
So introduce a new option called 'locking-scheme' which if it is 'granular'
will give correct information in heal-info. Not only that, Extra network hops
for taking compatibility locks, sh-domain locks in heal info will not be
necessary anymore. Thus it improves performance.
BUG: 1322850
Change-Id: Ia563c5f096b5922009ff0ec1c42d969d55d827a3
Signed-off-by: Pranith Kumar K <pkarampu@redhat.com>
Reviewed-on: http://review.gluster.org/13873
Smoke: Gluster Build System <jenkins@build.gluster.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Ashish Pandey <aspandey@redhat.com>
Reviewed-by: Anuradha Talur <atalur@redhat.com>
Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When quota is enabled the quota enforcer tries to get the size of the
source directory by sending nameless lookup to quotad. But if the rename
is successful even on one subvol or the source layout has anomalies then
this nameless lookup in quotad tries to heal the directory which requires
a lock on as many subvols as it can. But src is already locked as part of
rename. For rename to proceed in brick it needs to complete a cluster-wide
lookup. But cluster-wide lookup in quotad is blocked on locks held by rename,
hence a deadlock. To avoid this quota sends an option in xdata which instructs
DHT not to heal.
Change-Id: I792f9322331def0b1f4e16e88deef55d0c9f17f0
BUG: 1252244
Signed-off-by: Sakshi Bansal <sabansal@redhat.com>
Reviewed-on: http://review.gluster.org/13988
Smoke: Gluster Build System <jenkins@build.gluster.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Problem:
When there are 2 sources and one sink and if two self-heal daemons
try to acquire locks at the same time, there is a chance that it
gets a lock on one source and sink leading partial to heal. This will
need one more heal from the remaining source to sink for the complete
self-heal. This is not optimal.
Fix:
Upgrade non-blocking locks to blocking lock on all the subvolumes, if
the number of locks acquired is majority and there were eagains.
BUG: 1318751
Change-Id: Iae10b8d3402756c4164b98cc49876056ff7a61e5
Signed-off-by: Pranith Kumar K <pkarampu@redhat.com>
Reviewed-on: http://review.gluster.org/13766
Smoke: Gluster Build System <jenkins@build.gluster.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Ravishankar N <ravishankar@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Problem:
In afr-v1 pre-op, xattrop increments self xattr first then it increments the
value on rest. In post-op, xattr value is decreased first on rest and at last
it gets decremented on self. So for a possible operation to be witnessed i.e.
a fop is seen by the brick it is important to have at least 1 pending op
because without completing pre-op fop won't come. The other possibility is when
fop completes but at the time of post-op after decrementing pending counts on
others just before decrementing its own pending count, the brick dies.
Fix:
Fix witness detection code in afr_self_heal_find_direction()
BUG: 1322253
Change-Id: Ia7e76482c0a46e775e269bb96ec1b9490a3ac18f
Signed-off-by: Pranith Kumar K <pkarampu@redhat.com>
Reviewed-on: http://review.gluster.org/13811
Smoke: Gluster Build System <jenkins@build.gluster.com>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
Reviewed-by: Ravishankar N <ravishankar@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Problem: The throughput for a 'dd' workload was much less for arbiter
configuration when compared to normal replica-3 volume. There were 2
issues:
i)arbiter_writev was using the request dict as response dict while
unwinding, leading to incorect GLUSTERFS_WRITE_IS_APPEND and
GLUSTERFS_OPEN_FD_COUNT values (=4), leading to immediate post-ops
because is_afr_delayed_changelog_post_op_needed() failed due to
afr_are_multiple_fds_opened() check.
ii) The arbiter code in afr was setting local->transaction.{start and len} =0
to take full file locks. What this meant was even for simultaenous but
non-overlapping writevs, afr_transaction_eager_lock_init() was not
happening because afr_locals_overlap() always stays true. Consequently
is_afr_delayed_changelog_post_op_needed() failed due to
local->delayed_post_op not being set.
Fix:
i) Send appropriate response dict values in arbiter_writev.
ii) Modify flock params instead of local->transaction.{start and len} to
take full file locks in the transaction.
Also changed _fill_writev_xdata() in posix to fill rsp_xdata for
whatever key is requested for.
Change-Id: I1c5fc5e98aba49ade540bb441a022e65b753432a
BUG: 1324004
Signed-off-by: Ravishankar N <ravishankar@redhat.com>
Reported-by: Robert Rauch <robert.rauch@gns-systems.de>
Reported-by: Russel Purinton <russell.purinton@gmail.com>
Reviewed-on: http://review.gluster.org/13906
Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
Smoke: Gluster Build System <jenkins@build.gluster.com>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This turns a special xattr into an rmdir with flags set. When that hits
the posix translator on the server side, that causes the file/directory
to be moved into the special "landfill" directory. From there, the
posix janitor thread will take care of deleting it entirely on the
server side - traversing it recursively if necessary. A couple of
secondary issues were fixed to make this effective.
* FUSE now ensures that setxattr values are NUL terminated.
* The janitor thread now gets woken up immediately when something is
placed in 'landfill' instead of only when file descriptors need to be
closed.
* The default landfill-emptying interval was reduced to 10s.
To use the feature, issue a setxattr something like this:
setfattr -n glusterfs.dht.nuke -v "" /mnt/glusterfs/vol/some_dir
The value doesn't actually matter; the mere receipt of a request with
this key is sufficient. Some day it might be useful to allow setting a
required value as a sort of password, so that only those who know it can
access the underlying special functionality.
Change-Id: I8a343c2cdb40a76d5a06c707191fb67babb8514f
Signed-off-by: Jeff Darcy <jdarcy@redhat.com>
Reviewed-on: http://review.gluster.org/13878
Smoke: Gluster Build System <jenkins@build.gluster.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch addresses two races while renaming directories:
1) While renaming src to dst, if a lookup selfheal is triggered
it can recreate src on those subvols where rename was successful.
This leads to multiple directories (src and dst) having same gfid.
To avoid this we must take locks on all subvols with src.
2) While renaming if the dst exists and a lookup selfheal is
triggered it will find anomalies in the dst layout and try to
heal the stale layout. To avoid this we must take lock on any
one subvol with dst.
Change-Id: I637f637d3241d9065cd5be59a671c7e7ca3eed53
BUG: 1252244
Signed-off-by: Sakshi <sabansal@redhat.com>
Reviewed-on: http://review.gluster.org/11880
Smoke: Gluster Build System <jenkins@build.gluster.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There is a possibility that while an rmdir is completed on
some non-hashed subvol and proceeding to others, a lookup
selfheal can recreate the same directory on those subvols
for which the rmdir had succeeded. Now the deletion of the
parent directory will fail with an ENOTEMPTY.
To fix this take blocking inodelk on the subvols before
starting rmdir. Selfheal must also take blocking inodelk
before creating the entry.
Change-Id: I168a195c35ac1230ba7124d3b0ca157755b3df96
BUG: 1245065
Signed-off-by: Sakshi <sabansal@redhat.com>
Reviewed-on: http://review.gluster.org/13528
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
Smoke: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
Tested-by: Raghavendra G <rgowdapp@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
| |
BUG: 1221737
Change-Id: I0ed71a72f0e33bd733723e00a01cf28378c5534e
Signed-off-by: Pranith Kumar K <pkarampu@redhat.com>
Reviewed-on: http://review.gluster.org/13755
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
Smoke: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Problem:
All inodes that are looked-up are always forgotten without fail in
afr removing the benefits of them being in lru. This same code can
cause crashes if between inode_lookup, inode_forget in afr if the
top xlator does inode_forget(0).
Fix:
Don't use lookup/forget in afr. No benefits are there at the moment
for keeping this code. It is impossible to prevent top xlators to
do inode_forget(0). Found similar instances in ec
and removed them even though those code paths are not going to
be executed in any place other than heal-daemon.
BUG: 1321554
Change-Id: Ia4cb236178f7f129cc898d53f0bbd26f494a2a8d
Signed-off-by: Pranith Kumar K <pkarampu@redhat.com>
Reviewed-on: http://review.gluster.org/13834
Smoke: Gluster Build System <jenkins@build.gluster.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Anuradha Talur <atalur@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Extended the CLI to include support for split-brain resolution based on
mtime. The command syntax is:
$:gluster volume heal <VOLNAME> split-brain latest-mtime <FILE>
where <FILE> can be either the full file name as seen from the root of the
volume (or) the gfid-string representation of the file.
Change-Id: I7a16f72ff1a4495aa69f43f22758a9404e958b4f
BUG: 1321322
Signed-off-by: Ravishankar N <ravishankar@redhat.com>
Reviewed-on: http://review.gluster.org/13828
Smoke: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
1. Spawn a thread for background fix-layout for tier process.
2. Once the fix-layout is completed a marker xttr is set on the root of
volume to mark the completion of the background fixlayout, so that
even if the tier process is spawned again, fixlayout will not be
issued, if it was completed last time.
3. Please note that promotion of legacy files will happen eventually as
the ctr lookup heal in the fixlayout slowly heals the ctr db for legacy
files OR the ctr lookup heal happend due to a name lookup.
4. When a detach tier is successful in evacuation data from hot tier, we remove
the marker xattr is removed. So that next attach tier runs the background
tier fixlayout.
what is remaining ?
1. Instead of clearing the marker xattr of tiering fix layout at the end of detach start
clear it during detach commit. But the issue is detach commit is a glusterd operation
and the volume is not mounted in glusterd.
The reason we want to do it in detach commit is that if the admin wants to attach the
same tier again, then a background fixlayout will be triggered, which would not be needed.
2. Clearing the CTR DB of the cold bricks when there is a detach commit, as it will be having
entries which will be stale when the volume is used, with ctr off (ctr is switched off only when
we have detach commit.)
Change-Id: Ibe343572e95865325cd0eef4d0b976b626a3c0c5
BUG: 1313228
Signed-off-by: Joseph Fernandes <josferna@redhat.com>
Reviewed-on: http://review.gluster.org/13491
Smoke: Gluster Build System <jenkins@build.gluster.com>
Tested-by: Joseph Fernandes
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Dan Lambright <dlambrig@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When an entry is being created the inode is yet to be linked
so args must be filled with gfid and ia_type for it to give
consistent iatt.
Also handle Dht sending fops on inode not yet linked.
BUG: 1302948
Change-Id: I6969cacb437cad02f66716f3bf8ec004ffe7c691
Signed-off-by: Pranith Kumar K <pkarampu@redhat.com>
Reviewed-on: http://review.gluster.org/13827
Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com>
Smoke: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Anuradha Talur <atalur@redhat.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
stale timestamp
Consider the scenario where an mkdir has just created the
directory but has not healed it yet. A parallel lookup on
this entry will find anomalies and trigger a selfheal which
will sample the ctime of the directory after the mkdir phase.
Meanwhile the mkdir has completed setting the layout and
updated the ctime. The selfheal then sees the layout to be
healed and returns with the ctime it got after the mkdir phase
which has now become stale. However if the lookup happens
to unwind before the mkdir then the inode associated with
lookup will get linked in the inode table which has the
stale ctime. To avoid this selfheal must do an iatt_merge in
refresh layout to get the latest timestamp irrespective of
whether it needs to heal the layout or not.
Change-Id: I3634c3978bcc1710705f44b48f3876601682d33e
BUG: 1302948
Signed-off-by: Sakshi Bansal <sabansal@redhat.com>
Reviewed-on: http://review.gluster.org/13781
Smoke: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch is part two change to prevent data loss
in a replicate volume on doing a add-brick operation.
Problem: After doing add-brick, there is a chance
that self heal might happen from the newly added
brick rather than the source brick, leading to data loss.
Solution: Mark pending changelogs on afr children for
the new afr-child so that heal is performed in the
correct direction.
Change-Id: I11871e55eef3593aec874f92214a2d97da229b17
BUG: 1276203
Signed-off-by: Anuradha Talur <atalur@redhat.com>
Reviewed-on: http://review.gluster.org/12454
Smoke: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Directory size is meaningless. Every filesystem has its own
unpredictable way of increasing or decreasing it, based on internal data
structures and even transient conditions. Some filesystems (e.g. ext4)
never decrease it at all. Others (e.g. btrfs) don't even report it.
Very few programs look at it, and those that do are broken.
Unfortunately, one such program is GNU tar, which will complain when it
sees different values because at different times we got the value from
different DHT subvolumes. To avoid such problems, just report a
constant value.
Change-Id: Id64ce917c75b5f7ff50cb55b6e997f3b3556e7e3
BUG: 1302948
Original-author: Shyam <srangana@redhat.com>
Signed-off-by: Jeff Darcy <jdarcy@redhat.com>
Signed-off-by: N Balachandran <nbalacha@redhat.com>
Reviewed-on: http://review.gluster.org/13770
Smoke: Gluster Build System <jenkins@build.gluster.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This fix adds a paramater "tier-max_promote_size" to control wether
a file is migrated or not based on its size. By default the value
is 0, meaning all files are migrated. If set to a non-zero
value, files larger than the parameter won't be moved
in tiered volumes.
Change-Id: Ia6b88e9b2508935bef500d956f9192e59670fe00
BUG: 1313495
Signed-off-by: Dan Lambright <dlambrig@redhat.com>
Reviewed-on: http://review.gluster.org/13570
Smoke: Gluster Build System <jenkins@build.gluster.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Joseph Fernandes
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Problem: If a fop takes lock, and completes its operation,
it waits for 1 second before releasing the lock. However,
If ec find any lock contention within this time period,
it release the lock immediately before time expires. As we
take lock on first brick, for few operations, like read, it
might happen that discovery of lock contention might take
long time and can degrades the performance.
Solution: Provide an option to enable/disable eager lock.
If eager lock is disabled, lock will be released as soon
as fop completes.
gluster v set <VOLUME NAME> disperse.eager-lock on
gluster v set <VOLUME NAME> disperse.eager-lock off
Change-Id: I000985a787eba3c190fdcd5981dfbf04e64af166
BUG: 1314649
Signed-off-by: Ashish Pandey <aspandey@redhat.com>
Reviewed-on: http://review.gluster.org/13605
Smoke: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If there are large number of files to be migrated
and by this time if the volume goes down, then the tierd
has to be stopped. But on a huge query file list it keeps
checking for each file before stopping. If the volume comes
up before the old tierd dies then due to the
presence of old tierd new one won't be created. After
the old one completes the task, it dies and the status
ends up as failed.
This patch will check if the status is still running and then let
it continue its work. Else it will stop running the tierd.
Change-Id: I6522a4e2919e84bf502b99b13873795b9274f3cd
BUG: 1315659
Signed-off-by: hari gowtham <hgowtham@redhat.com>
Reviewed-on: http://review.gluster.org/13646
Tested-by: Dan Lambright <dlambrig@redhat.com>
Smoke: Gluster Build System <jenkins@build.gluster.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Dan Lambright <dlambrig@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Problem:
1) dict_for_each loops over the elements without any locks, so the members of
the dictionary can be ref/unrefed while dict_for_each is executed by another
thread leading to crashes.
Basically with distributed ec + disctributed replicate as cold, hot tiers. tier
sends a lookup which fails on ec. (By this time dict already contains ec
xattrs) After this lookup_everywhere code path is hit in tier which triggers
lookup on each of distribute's hash lookup but fails which leads to the cold,
hot dht's lookup_everywhere in two parallel epoll threads where in ec when it
tries to set trusted.ec.version/dirty/size as keys in the dictionary, the older
values against the same key get erased. While this erasing is going on if the
thread that is doing lookup on afr's subvolume accesses these keys either in
dict_copy_with_ref or client xlator trying to serialize, that can either lead
to crash or hang based on if the spin/mutex lock is called on invalid memory.
2) EC deletes GF_CONTENT_KEY from the dictionary, this may lead to extra reads
in case of lookup-everwhere for tiered volumes.
Fix:
Do dict_copy_with_ref() for the lookup-dictionary.
This is avoiding the problem and is not actually fixing the 1st problem.
2nd problem will be fixed.
Change-Id: I5427aa14c48cb7572977d4de9a28c5ffff2b4b95
BUG: 1315560
Signed-off-by: Pranith Kumar K <pkarampu@redhat.com>
Reviewed-on: http://review.gluster.org/13680
Smoke: Gluster Build System <jenkins@build.gluster.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Xavier Hernandez <xhernandez@datalab.es>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When the parent GFID is a stale entry, the lookup on this parent
fails and this in turn fails the demotion process.
This patch will make the stale entry error to be skipped.
Situation for pargfid to be stale:
Consider a folder from a tar file. Once the tar file is untared
the files in the tar-file will start to demote.
when the demotion is under progress, if we tend to delete
the actual folder, then the files under it which are
undergoing demotion will do a lookup on the parent which was
deleted and become stale entry. This stale entry fails the
Lookup and this will fail the demotion of the other files(not from
tar) that are supposed to be demoted.
Change-Id: I3d47c32c4077526d477a25912b0135bab98b23fc
BUG: 1311178
Signed-off-by: hari gowtham <hgowtham@redhat.com>
Reviewed-on: http://review.gluster.org/13501
Tested-by: hari gowtham <hari.gowtham005@gmail.com>
Smoke: Gluster Build System <jenkins@build.gluster.com>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Dan Lambright <dlambrig@redhat.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
It is better to choose local brick as source if possible to prevent
over the wire read thus saving on bandwidth. Also changed code to not
attempt data-heal if 'source' is selected as arbiter.
Change-Id: I9a328d0198422280b13a30ab99545370a301dfea
BUG: 1314150
Signed-off-by: Pranith Kumar K <pkarampu@redhat.com>
Reviewed-on: http://review.gluster.org/13585
Smoke: Gluster Build System <jenkins@build.gluster.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com>
Tested-by: Krutika Dhananjay <kdhananj@redhat.com>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
1. In afr_getxattr_cbk, consider the errno value before blindly
launching an inode refresh and a subsequent retry on other children.
2. We want to accuse small files only when we know for sure that there is no
IO happening on that inode. Otherwise, the ia_sizes obtained in the
post-inode-refresh replies may mismatch due to a race between
inode-refresh and ongoing writes, causing spurious heal launches.
Change-Id: Ife180f4fa5e584808c1077aacdc2423897675d33
BUG: 1309462
Signed-off-by: Ravishankar N <ravishankar@redhat.com>
Reviewed-on: http://review.gluster.org/13595
Smoke: Gluster Build System <jenkins@build.gluster.com>
Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com>
Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Problem:
If afr_lookup_done() or afr_read_subvol_select_by_policy() chooses the
arbiter brick to serve the stat() data, file size will be reported as
zero from the mount, despite other data bricks being available. This can
break programs like tar which use the stat info to decide how much to read.
Fix:
In the inode-context, mark arbiter as a non-readable subvol for both
data and metadata.
It it to be noted that by making this fix, we are *not* going to serve
metadata FOPS anymore from the arbiter brick despite the brick storing
the metadata. It makes sense to do this because the ever increasing
over-loaded FOPs (getxattr returning stat data etc.) and compound FOPS
in gluster will otherwise make it difficult to add checks in code to
handle corner cases.
Change-Id: Ic60b25d77fd05e0897481b7fcb3716d4f2101001
BUG: 1310171
Signed-off-by: Ravishankar N <ravishankar@redhat.com>
Reported-by: Mat Clayton <mat@mixcloud.com>
Reviewed-on: http://review.gluster.org/13539
Reviewed-by: Anuradha Talur <atalur@redhat.com>
Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com>
Smoke: Gluster Build System <jenkins@build.gluster.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: Ie5eaf1075b1c9c29dd7d85bf7b61b22e1fbce422
BUG: 1314291
Signed-off-by: Raghavendra Talur <rtalur@redhat.com>
Reviewed-on: http://review.gluster.org/13591
Reviewed-by: hari gowtham <hari.gowtham005@gmail.com>
Smoke: Gluster Build System <jenkins@build.gluster.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Problem:
Afr does dict_ref of the xattr_req that comes to it and deletes "gfid-req" key.
Dht uses same dict to send lookup to other subvolumes. So in case of
directories and more than 1 dht subvolumes, second subvolume till the last
subvolume won't get a lookup request with "gfid-req". So gfid reset never
happens on the directories in distributed replicate subvolume for 2nd till last
subvolumes.
Fix:
Make a copy of lookup xattr request.
Also fixed replies_wipe possibly resetting gfid to NULL gfid
BUG: 1312816
Change-Id: Ic16260e5a4664837d069c1dc05b9e96ca05bda88
Signed-off-by: Pranith Kumar K <pkarampu@redhat.com>
Reviewed-on: http://review.gluster.org/13545
Smoke: Gluster Build System <jenkins@build.gluster.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If a heal is needed after inode refresh (lookup, read_txn), launch it in
the background instead of blocking the fop (that triggered refresh) until the
heal happens.
afr_replies_interpret() is modified such that the heal is
launched only if atleast one sink brick is up.
Max. no of heals that can happen in parallel is configurable via the
'background-self-heal-count' volume option. Any number greater than that
is put in a wait queue whose length is configurable via
'heal-wait-queue-leng' volume option. If the wait queue is also full,
further heals will be ignored.
Default values: background-self-heal-count=8, heal-wait-queue-leng=128
Change-Id: I1d4a52814cdfd43d90591b6d2ad7b6219937ce70
BUG: 1297172
Signed-off-by: Ravishankar N <ravishankar@redhat.com>
Reviewed-on: http://review.gluster.org/13207
Smoke: Gluster Build System <jenkins@build.gluster.com>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The trusted.ec.config xattr is not defined for directories. However
sometimes it could be requested because the inode type of a directory
can temporarily be IA_INVAL.
Requesting such xattr using the xattrop fop when it doesn't exist,
returns a config value full of 0's, which is invalid and caused some
fops to fail.
This patch filters out this case by ignoring config xattr == 0.
Change-Id: Ied51c35b313ea8c3eeae27812f9bae61d3808e92
BUG: 1293223
Signed-off-by: Xavier Hernandez <xhernandez@datalab.es>
Reviewed-on: http://review.gluster.org/13446
Smoke: Gluster Build System <jenkins@build.gluster.com>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Ashish Pandey <aspandey@redhat.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently a main loop in tiering spawns promotion and demotion threads,
and does a join to wait for them to complete. When one of the two
threads takes a long time, the main thread waits for it
before exiting the join. It may wait so long the scheduled time
for the other thread is skipped. In the case of demotion, it may be
a long time before another attempt. This patch fixes that by
making the promotion and demotion activities independant. A side
effect of this change is the logic is significantly simplified.
Change-Id: I1196bd4bbfc95e8aa326a9bd4ebf395032369d1c
BUG: 1306852
Signed-off-by: Dan Lambright <dlambrig@redhat.com>
Reviewed-on: http://review.gluster.org/13433
Smoke: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Joseph Fernandes
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently fops like mkdir used the the ctime it gets
after creating the directory entry. But setting layout
also updates the ctime of a directory. Hence DHT must
get the ctime after the setxattr call and unwind with
the latest ctime to avoid mismatch in time seen by
applications like tar.
Change-Id: Iecbbe3aac5244af5da9788b48ccf299ca56b4bae
BUG: 1302948
Signed-off-by: Sakshi Bansal <sabansal@redhat.com>
Reviewed-on: http://review.gluster.org/13352
Smoke: Gluster Build System <jenkins@build.gluster.com>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I2458e18197bdf7565563a85e9021b5b2850c1825
BUG: 1303945
Signed-off-by: Sakshi Bansal <sabansal@redhat.com>
Reviewed-on: http://review.gluster.org/13392
Smoke: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Xavier Hernandez <xhernandez@datalab.es>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently DHT takes non-blocking locks for file rename.
Due to this during parallel renames some clients fail
with EBUSY or ESTALE errors. Hence to avoid application
discontinuity file rename must take blocking inode locks.
Change-Id: I986e9d08b3be359f20b1a3e1564e049b0f3dffd3
BUG: 1304966
Signed-off-by: Sakshi Bansal <sabansal@redhat.com>
Reviewed-on: http://review.gluster.org/13366
Smoke: Gluster Build System <jenkins@build.gluster.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
cli/src/cli-cmd-parser.c (chenk)
cli/src/cli-xml-output.c (spandit)
cli/src/cli.c (chenk)
libglusterfs/src/common-utils.c (vmallika)
libglusterfs/src/gfdb/gfdb_sqlite3.c (jfernand +1)
rpc/rpc-transport/socket/src/socket.c (?)
xlators/cluster/afr/src/afr-transaction.c (?)
xlators/cluster/dht/src/dht-common.h (srangana +2)
xlators/cluster/dht/src/dht-selfheal.c (srangana +2)
xlators/debug/io-stats/src/io-stats.c (R. Wareing)
xlators/features/barrier/src/barrier.c (vshastry)
xlators/features/bit-rot/src/bitd/bit-rot-scrub.h (vshankar +1)
xlators/features/shard/src/shard.c (kdhananj +1)
xlators/mgmt/glusterd/src/glusterd-ganesha.c (skoduri)
xlators/mgmt/glusterd/src/glusterd-handler.c (atinmu)
xlators/mgmt/glusterd/src/glusterd-op-sm.h (atinmu)
xlators/mgmt/glusterd/src/glusterd-snapshot.c (spandit)
xlators/mgmt/glusterd/src/glusterd-syncop.c (atinmu)
xlators/mgmt/glusterd/src/glusterd-volgen.c (atinmu)
xlators/protocol/client/src/client-messages.h (mselvaga +1)
xlators/storage/bd/src/bd-helper.c (M. Mohan Kumar)
xlators/storage/bd/src/bd.c (M. Mohan Kumar)
xlators/storage/posix/src/posix.c (nbalacha +1)
Change-Id: I85934fbcaf485932136ef3acd206f6ebecde61dd
BUG: 1293133
Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com>
Reviewed-on: http://review.gluster.org/13031
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
Smoke: Gluster Build System <jenkins@build.gluster.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
fixes for various warnings reported by cppcheck
N.B. cppcheck output is in the bugzilla
Change-Id: I33acec127bc4536935fdd8d52a0c490ec54d50b2
BUG: 1292954
Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com>
Reviewed-on: http://review.gluster.org/13006
Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
Smoke: Gluster Build System <jenkins@build.gluster.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Running "rm -rf" on a tiered volume sometimes caused
the client to crash because dht_readdirp_cbk referenced
a NULL layout for the hot tier subvol.
Now, entries are skipped if the layout is NULL. This
can cause "rm -rf" to fail with ENOTEMPTY rmdir failures.
Change-Id: Idd71a9d0f7ee712899cc7113bbf2cd3dcb25808b
BUG: 1307208
Signed-off-by: N Balachandran <nbalacha@redhat.com>
Reviewed-on: http://review.gluster.org/13440
Smoke: Gluster Build System <jenkins@build.gluster.com>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
Reviewed-by: Dan Lambright <dlambrig@redhat.com>
Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Problem:
If index heal is launched when some of the bricks are down, glustershd of that
node sends a -1 op_ret to glusterd which eventually propagates it to the CLI.
Also, glusterd sometimes sends an err_str and sometimes not (depending on the
failure happening in the brick-op phase or commit-op phase). So the message that
gets displayed varies in each case:
"Launching heal operation to perform index self heal on volume testvol has been
unsuccessful"
(OR)
"Commit failed on <host>. Please check log file for details."
Fix:
1. Modify afr_xl_op() to return -1 even if index healing of atleast one brick
fails.
2. Ignore glusterd's error string in gf_cli_heal_volume_cbk and print a more
meaningful message.
The patch also fixes a bug in glusterfs_handle_translator_op() where if we
encounter an error in notify of one xlator, we break out of the loop instead of
sending the notify to other xlators.
Change-Id: I957f6c4b4d0a45453ffd5488e425cab5a3e0acca
BUG: 1302291
Signed-off-by: Ravishankar N <ravishankar@redhat.com>
Reviewed-on: http://review.gluster.org/13303
Reviewed-by: Anuradha Talur <atalur@redhat.com>
Smoke: Gluster Build System <jenkins@build.gluster.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The wrong variable was being checked to determine
the watermark value.
Change-Id: If4c97fa70b772187f1fcbdf5193e077cb356a8b1
BUG: 1303895
Signed-off-by: N Balachandran <nbalacha@redhat.com>
Reviewed-on: http://review.gluster.org/13357
Smoke: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Dan Lambright <dlambrig@redhat.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Whenever a new brick is added, quota related xattr's
should be healed but currently, the xattr
"quota.limit-objects.<suffix>" needed for inode-quota is
not being healed.
The patch fixes this issue.
Change-Id: I1e7b229126f7b058642bbc3fb5c109bfd8925325
BUG: 1302257
Signed-off-by: Manikandan Selvaganesh <mselvaga@redhat.com>
Reviewed-on: http://review.gluster.org/13299
Smoke: Gluster Build System <jenkins@build.gluster.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Vijaikumar Mallikarjuna <vmallika@redhat.com>
Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Problem:
After a replace brick command, newly added
brick does not contain data which existed
on old brick.
Solution:
Do getxattr after initialization of all the
bricks. This will trigger heal for brick root
as soon as it finds the version mismatch on
newly added brick.
Removing tests from ec-new-entry.t which were
required to simulate automation of heal after
replace brick.
Change-Id: I08e3dfa565374097f6c08856325ea77727437e11
BUG: 1304686
Signed-off-by: Ashish Pandey <aspandey@redhat.com>
Reviewed-on: http://review.gluster.org/13353
Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
Smoke: Gluster Build System <jenkins@build.gluster.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Ec manager shouldn't return -ve states, but it is, fixed that.
Change-Id: I3f97c6ba2dbf9da724e8e1ee9b2c9da73f40013d
BUG: 1300929
Signed-off-by: Pranith Kumar K <pkarampu@redhat.com>
Reviewed-on: http://review.gluster.org/13278
Tested-by: Xavier Hernandez <xhernandez@datalab.es>
Smoke: Gluster Build System <jenkins@build.gluster.com>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There is a bug in the way hardlinks are handled in tiered volumes. Ideally, the tier linkto files on the cold tier to files that are hardlinks to each other on the hot tier, should themselves be hardlinks of each other. As they are not, they end up being files with the same gfid but different names for the cold tier dht, and end up overwriting the cached-subvol information stored in the dht inode-ctx.
Change-Id: Ic658a316836e6a1729cfea848b7d212674b0edd2
BUG: 1305277
Signed-off-by: N Balachandran <nbalacha@redhat.com>
Reviewed-on: http://review.gluster.org/13391
Smoke: Gluster Build System <jenkins@build.gluster.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Dan Lambright <dlambrig@redhat.com>
Tested-by: Dan Lambright <dlambrig@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since we now try to get the 'trusted.ec.config' xattr for inodes of
type IA_INVAL (these inodes will be set to some valid type later),
if that inode corresponds to a non regular file, the xattr won't
exist and we will handle this as an error when it's not.
This patch solves the problem by only considering errors for inodes
that are already known to be regular files.
Change-Id: Id72f314e209459236d75cf087fc51e09943756b4
BUG: 1293223
Signed-off-by: Xavier Hernandez <xhernandez@datalab.es>
Reviewed-on: http://review.gluster.org/13238
Smoke: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Ashish Pandey <aspandey@redhat.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
seek() is like a read(), copied the same semantics.
Change-Id: I100b741d9bfacb799df318bb081f2497c0664927
BUG: 1220173
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Reviewed-on: http://review.gluster.org/11483
Smoke: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
BUG: 1220173
Change-Id: Iaa23ba81df4ee78ddaab1f96b3d926a563b4bb3d
Signed-off-by: Xavier Hernandez <xhernandez@datalab.es>
Reviewed-on: http://review.gluster.org/11494
Smoke: Gluster Build System <jenkins@build.gluster.com>
Tested-by: Niels de Vos <ndevos@redhat.com>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
For getting basic support for SEEK_DATA/SEEK_HOLE, striping has not been
implemented. Bug 1302149 has been filed to get this new feature in
stripe as well.
Change-Id: I9cfed795737609120eafe86f9287d79057b14fe2
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Reviewed-on: http://review.gluster.org/13294
Smoke: Gluster Build System <jenkins@build.gluster.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: Ib4b3a843e78eccf5b8e0e7776cd0128013a59a3e
BUG: 1303945
Signed-off-by: Vijay Bellur <vbellur@redhat.com>
Reviewed-on: http://review.gluster.org/13322
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
Smoke: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Now heal-info does an open() on the file being examined so that
the client at some point sees open-fd count being > 1 and releases
the eager-lock so that heal-info doesn't remain blocked forever
until IO completes.
Change-Id: Icc478098e2bc7234408728b54d8185102b3540dc
BUG: 1297695
Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com>
Reviewed-on: http://review.gluster.org/13326
Reviewed-by: Ravishankar N <ravishankar@redhat.com>
Smoke: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
1. Each brick on a host will get a separate query file.
2. While reading query record from these query files we
read them in a Round-Robin manner.
3. When an error occurs during migration we rename it to
query file with an time stamp and .err extension for
better debugging.
Change-Id: I27c4285d24fd695d2d5cbd9fd7db3879d277ecc8
BUG: 1302772
Signed-off-by: Joseph Fernandes <josferna@redhat.com>
Reviewed-on: http://review.gluster.org/13293
Smoke: Gluster Build System <jenkins@build.gluster.com>
Tested-by: N Balachandran <nbalacha@redhat.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
Reviewed-by: Dan Lambright <dlambrig@redhat.com>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A node which contains only cold bricks and has detected that
the high watermark value has been breached on the hot tier will
never reset the watermark to the correct value. The promotion check
will thus always fail and no promotions will occur from that node.
Change-Id: I0f0804744cd184c263acbea1ee50cd6010a49ec5
BUG: 1303895
Signed-off-by: N Balachandran <nbalacha@redhat.com>
Reviewed-on: http://review.gluster.org/13341
Smoke: Gluster Build System <jenkins@build.gluster.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Dan Lambright <dlambrig@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When iterating the query file during migration, tiering should
break out of the loop once cycle time completes. Otherwise it
may be possible to stay in the loop for a long time. If that
happens updates to files will become stale and have not impact
migration.
Change-Id: Ib60cf74bc84e8646e6a0da21ff04954b1b83c414
BUG: 1301227
Signed-off-by: Dan Lambright <dlambrig@redhat.com>
Reviewed-on: http://review.gluster.org/13284
Smoke: Gluster Build System <jenkins@build.gluster.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
|