summaryrefslogtreecommitdiffstats
path: root/xlators/cluster/dht/src/dht-selfheal.c
Commit message (Collapse)AuthorAgeFilesLines
* dht: lock on subvols to prevent lookup vs rmdir raceSakshi2016-04-051-55/+231
| | | | | | | | | | | | | | | | | | | | | | There is a possibility that while an rmdir is completed on some non-hashed subvol and proceeding to others, a lookup selfheal can recreate the same directory on those subvols for which the rmdir had succeeded. Now the deletion of the parent directory will fail with an ENOTEMPTY. To fix this take blocking inodelk on the subvols before starting rmdir. Selfheal must also take blocking inodelk before creating the entry. Change-Id: I168a195c35ac1230ba7124d3b0ca157755b3df96 BUG: 1245065 Signed-off-by: Sakshi <sabansal@redhat.com> Reviewed-on: http://review.gluster.org/13528 CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com>
* dht: update attr information in refresh layout to avoidSakshi Bansal2016-03-231-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | stale timestamp Consider the scenario where an mkdir has just created the directory but has not healed it yet. A parallel lookup on this entry will find anomalies and trigger a selfheal which will sample the ctime of the directory after the mkdir phase. Meanwhile the mkdir has completed setting the layout and updated the ctime. The selfheal then sees the layout to be healed and returns with the ctime it got after the mkdir phase which has now become stale. However if the lookup happens to unwind before the mkdir then the inode associated with lookup will get linked in the inode table which has the stale ctime. To avoid this selfheal must do an iatt_merge in refresh layout to get the latest timestamp irrespective of whether it needs to heal the layout or not. Change-Id: I3634c3978bcc1710705f44b48f3876601682d33e BUG: 1302948 Signed-off-by: Sakshi Bansal <sabansal@redhat.com> Reviewed-on: http://review.gluster.org/13781 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* dht: mkdir must unwind with latest ctimeSakshi Bansal2016-02-261-0/+18
| | | | | | | | | | | | | | | | | | Currently fops like mkdir used the the ctime it gets after creating the directory entry. But setting layout also updates the ctime of a directory. Hence DHT must get the ctime after the setxattr call and unwind with the latest ctime to avoid mismatch in time seen by applications like tar. Change-Id: Iecbbe3aac5244af5da9788b48ccf299ca56b4bae BUG: 1302948 Signed-off-by: Sakshi Bansal <sabansal@redhat.com> Reviewed-on: http://review.gluster.org/13352 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* all: fixes for clang compile warningsKaleb S KEITHLEY2016-02-151-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | cli/src/cli-cmd-parser.c (chenk) cli/src/cli-xml-output.c (spandit) cli/src/cli.c (chenk) libglusterfs/src/common-utils.c (vmallika) libglusterfs/src/gfdb/gfdb_sqlite3.c (jfernand +1) rpc/rpc-transport/socket/src/socket.c (?) xlators/cluster/afr/src/afr-transaction.c (?) xlators/cluster/dht/src/dht-common.h (srangana +2) xlators/cluster/dht/src/dht-selfheal.c (srangana +2) xlators/debug/io-stats/src/io-stats.c (R. Wareing) xlators/features/barrier/src/barrier.c (vshastry) xlators/features/bit-rot/src/bitd/bit-rot-scrub.h (vshankar +1) xlators/features/shard/src/shard.c (kdhananj +1) xlators/mgmt/glusterd/src/glusterd-ganesha.c (skoduri) xlators/mgmt/glusterd/src/glusterd-handler.c (atinmu) xlators/mgmt/glusterd/src/glusterd-op-sm.h (atinmu) xlators/mgmt/glusterd/src/glusterd-snapshot.c (spandit) xlators/mgmt/glusterd/src/glusterd-syncop.c (atinmu) xlators/mgmt/glusterd/src/glusterd-volgen.c (atinmu) xlators/protocol/client/src/client-messages.h (mselvaga +1) xlators/storage/bd/src/bd-helper.c (M. Mohan Kumar) xlators/storage/bd/src/bd.c (M. Mohan Kumar) xlators/storage/posix/src/posix.c (nbalacha +1) Change-Id: I85934fbcaf485932136ef3acd206f6ebecde61dd BUG: 1293133 Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/13031 CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* dht/quota : heal the limit_objects_key xattr needed for inode-quotaManikandan Selvaganesh2016-02-101-0/+11
| | | | | | | | | | | | | | | | | | Whenever a new brick is added, quota related xattr's should be healed but currently, the xattr "quota.limit-objects.<suffix>" needed for inode-quota is not being healed. The patch fixes this issue. Change-Id: I1e7b229126f7b058642bbc3fb5c109bfd8925325 BUG: 1302257 Signed-off-by: Manikandan Selvaganesh <mselvaga@redhat.com> Reviewed-on: http://review.gluster.org/13299 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijaikumar Mallikarjuna <vmallika@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* quota: limit xattr for subdir not healed on newly added bricksvmallika2015-12-291-1/+19
| | | | | | | | | | | | | | DHT after creating missing directory, tries to heal the xattrs. This xattrs operation fails as INTERNAL FOP key was not set Change-Id: I819d373cf7073da014143d9ada908228ddcd140c BUG: 1294479 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/13100 Reviewed-by: Susant Palai <spalai@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org>
* dht : changing variable type to avoid overflowSakshi Bansal2015-11-261-7/+9
| | | | | | | | | | | | | | | | | For layout computation we find total size of the cluster and store it in an unsigned 32 bit variable. For large clusters this value may overflow which leads to wrong computations and for some bricks the layout may overflow. Hence using unsigned 64 bit to handle large values. Change-Id: I7c3ba26ea2c4158065ea9e74705a7ede1b6759c7 BUG: 1282751 Signed-off-by: Sakshi Bansal <sabansal@redhat.com> Reviewed-on: http://review.gluster.org/12597 Reviewed-by: Susant Palai <spalai@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* dht: reverting changes that takes lock on all subvols to prevent rmdir vs ↵Sakshi2015-09-141-130/+51
| | | | | | | | | | | | | | | lookup selfheal race Locking on all subvols before an rmdir is unable to remove all directory entries. Hence reverting the patch for now. Change-Id: I31baf2b2fa2f62c57429cd44f3f229c35eff1939 BUG: 1245065 Signed-off-by: Sakshi <sabansal@redhat.com> Reviewed-on: http://review.gluster.org/12125 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* cluster/dht : Propagate op_errno on failureNithya Balachandran2015-09-131-0/+1
| | | | | | | | | | | | | Fixed issue where dht_selfheal_layout_lock_cbk does not propagate the op_errno. Change-Id: I0b968339db65d2969e36e64407eeb724cc6516bd BUG: 1262438 Signed-off-by: Nithya Balachandran <nbalacha@redhat.com> Reviewed-on: http://review.gluster.org/12165 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* all: reduce "inline" usageJeff Darcy2015-09-011-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | There are three kinds of inline functions: plain inline, extern inline, and static inline. All three have been removed from .c files, except those in "contrib" which aren't our problem. Inlines in .h files, which are overwhelmingly "static inline" already, have generally been left alone. Over time we should be able to "lower" these into .c files, but that has to be done in a case-by-case fashion requiring more manual effort. This part was easy to do automatically without (as far as I can tell) any ill effect. In the process, several pieces of dead code were flagged by the compiler, and were removed. Change-Id: I56a5e614735c9e0a6ee420dab949eac22e25c155 BUG: 1245331 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/11769 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* dht : lock on subvols to prevent lookup vs rmdir raceSakshi2015-08-271-51/+130
| | | | | | | | | | | | | | | | | There is a possibility that while an rmdir is completed on some non-hashed subvol and proceeding to others. A lookup selfheal can recreate the same directory on those subvols for which the rmdir had succeeded. The fix is to take a blocking inodelk on the subvols before starting rmdir. Since selfheal requires lock on all subvols, if an rmdir is in progess acquiring locks will fail and vice versa. Change-Id: I841a44758c3b88f5e04d1cb73ad36e0cac9fdabb BUG: 1245065 Signed-off-by: Sakshi <sabansal@redhat.com> Reviewed-on: http://review.gluster.org/11725 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* dht: block/handle create op falling to decommissioned brickSusant Palai2015-08-231-3/+15
| | | | | | | | | | | | | | | | | | | | | | | Problem: Post remove-brick start till commit phase, the client layout may not be in sync with disk layout because of lack of lookup. Hence,a create call may fall on the decommissioned brick. Solution: Will acquire a lock on hashed subvol. So that a fix-layout or selfheal can not step on layout while reading the layout. Even if we read a layout before remove-brick fix-layout and the file falls on the decommissioned brick, the file should be migrated to a new brick as per the fix-layout. Change-Id: If84a12ec34f981adb2b9b224e80f535cfe5bf9f2 BUG: 1232378 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: http://review.gluster.org/11260 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* dict: dict_set_bin() should never free the pointer on errorNiels de Vos2015-07-241-0/+3
| | | | | | | | | | | | | | | | | | | | | | dict_set_bin() is handling the pointer that it passed inconsistently. Depending on the errors that can occur, the pointer passed to the dict can be free'd, but there is no guarantee. It is cleaner to have the caller free the pointer that allocated it and dict_set_bin() returned an error. When dict_set_bin() returned success, the given pointer will be free'd when dict_unref() calls data_destroy(). Many callers of dict_set_bin() already take care of free'ing the pointer on error. The ones that did not, are corrected with this change too. Change-Id: I39a4f7ebc0cae6d403baba99307d7ce408f25966 BUG: 1242280 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/11638 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: jiffin tony Thottan <jthottan@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org>
* dht: Adding log messages to the new logging frameworkarao2015-06-231-20/+27
| | | | | | | | | | | | | Change-Id: Ib3bb61c5223f409c23c68100f3fe884918d2dc3f BUG: 1194640 Signed-off-by: arao <arao@redhat.com> Reviewed-on: http://review.gluster.org/10021 Reviewed-by: N Balachandran <nbalacha@redhat.com> Reviewed-by: Joseph Fernandes Tested-by: Joseph Fernandes Reviewed-by: Dan Lambright <dlambrig@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com>
* DHT/permissoin: Let setattr consume stat built from lookup in heal pathSusant Palai2015-06-011-2/+0
| | | | | | | | | | | | | | | | setattr call post mkdir(selfheal) ends up using the mode bits returned by mkdir,which miss the required suid, sgid and sticky bit. Hence, the fix is to use the mode bits from local->stbuf which was used to create the missing directories. Change-Id: I478708c80e28edc6509b784b0ad83952fc074a5b BUG: 1110262 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: http://review.gluster.org/8208 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com>
* build: do not #include "config.h" in each fileNiels de Vos2015-05-291-5/+0
| | | | | | | | | | | | | | | | | | Instead of including config.h in each file, and have the additional config.h included from the compiler commandline (-include option). When a .c file tests for a certain #define, and config.h was not included, incorrect assumtions were made. With this change, it can not happen again. BUG: 1222319 Change-Id: I4f9097b8740b81ecfe8b218d52ca50361f74cb64 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/10808 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* dht: make lookup-unhashed=auto do something actually usefulJeff Darcy2015-05-101-1/+315
| | | | | | | | | | | | | | | | | | | | | | | | The key concept here is to determine whether a directory is "clean" by comparing its last-known-good topology to the current one for the volume. These are stored as "commit hashes" on the directory and the volume root respectively. The volume's commit hash changes whenever a brick is added or removed, and a fix-layout is done. A directory's commit hash changes only when a full rebalance (not just fix-layout) is done on it. If all bricks are present and have a directory commit hash that matches the volume commit hash, then we can assume that every file is in its "proper" place. Therefore, if we look for a file in that proper place and don't find it, we can assume it's not on any other subvolume and *safely* skip the global (broadcast to all) lookup. Change-Id: Id6ce4593ba1f7daffa74cfab591cb45960629ae3 BUG: 1219637 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Signed-off-by: Shyam <srangana@redhat.com> Reviewed-on: http://review.gluster.org/7702 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/dht: change log level of developer logs to DEBUGVijay Bellur2015-05-091-2/+2
| | | | | | | | | | | | | A few log messages in dht directory self heal at log level INFO are useful only for developers and these logs tend to casue excessive logs in our log files. Hence moving the log level of such logs to DEBUG. Change-Id: I8a543f4ddeb5c20b2978a0f7b18d8baccc935a54 BUG: 1217949 Signed-off-by: Vijay Bellur <vbellur@redhat.com> Reviewed-on: http://review.gluster.org/10281 Reviewed-by: N Balachandran <nbalacha@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* libglusterfs/syncop: Add xdata to all syncop callsRaghavendra Talur2015-04-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for xdata in both the request and response path of syncops. Few calls like lookup already had the support; have renamed variables in few places to maintain uniformity. xdata passed downwards is known as xdata_in and xdata passed upwards is known as xdata_out. There is an old patch by Jeff Darcy at http://review.gluster.org/#/c/8769/3 which does the same for some selected calls. It also brings in xdata support at gfapi level. xdata support at gfapi level would be introduced in subsequent patches. Change-Id: I340e94ebaf2a38e160e65bc30732e8fe1c532dcc BUG: 1158621 Signed-off-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-on: http://review.gluster.org/9859 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Avoid conflict between contrib/uuid and system uuidEmmanuel Dreyfus2015-04-041-9/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | glusterfs relies on Linux uuid implementation, which API is incompatible with most other systems's uuid. As a result, libglusterfs has to embed contrib/uuid, which is the Linux implementation, on non Linux systems. This implementation is incompatible with systtem's built in, but the symbols have the same names. Usually this is not a problem because when we link with -lglusterfs, libc's symbols are trumped. However there is a problem when a program not linked with -lglusterfs will dlopen() glusterfs component. In such a case, libc's uuid implementation is already loaded in the calling program, and it will be used instead of libglusterfs's implementation, causing crashes. A possible workaround is to use pre-load libglusterfs in the calling program (using LD_PRELOAD on NetBSD for instance), but such a mechanism is not portable, nor is it flexible. A much better approach is to rename libglusterfs's uuid_* functions to gf_uuid_* to avoid any possible conflict. This is what this change attempts. BUG: 1206587 Change-Id: I9ccd3e13afed1c7fc18508e92c7beb0f5d49f31a Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/10017 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* cluster/dht: create request dictionary if necessary during refreshRaghavendra G2015-03-061-10/+17
| | | | | | | | | layout. Change-Id: I5a5d793c86ee5de345608eede5618e4e6c02af9f BUG: 1195668 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/9733
* xlators/dht : divide by zero coverity fixManikandan Selvaganesh2015-03-051-1/+2
| | | | | | | | | | | | | CID:1226163. BUG: 789278 Change-Id: Ie31d65da236d7029784defad963672b2ded2676a BUG:1192435 Signed-off-by: Manikandan Selvaganesh <mselvaga@redhat.com> Signed-off-by: Humble Devassy Chirammal <hchiramm@redhat.com> Reviewed-on: http://review.gluster.org/9563 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: N Balachandran <nbalacha@redhat.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* cluster/dht: fixes to should_layout_fix logicRaghavendra G2015-03-051-12/+48
| | | | | | | | | | | | | | * Don't consider "dir-spread-count" option. This option is not supported. * Consider transition to weighted to equal distribution or vice-versa a valid case for fixing the layout. Change-Id: I0dcfe555dae9269ce20a41611cfdaa4f96c9e98b BUG: 1196615 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/9809 Reviewed-by: N Balachandran <nbalacha@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* cluster/dht: Fixes to should_fix_layout logicRaghavendra G2015-03-031-6/+38
| | | | | | | | | | | | | | | | | * With recent introduction of locking in self-heal codepath, fix layout was not allowed to progress during remove-brick. This patch fixes the issue. * dht_should_fix_layout also considers "dir-spread-count" option if set, to determine whether we should proceed with fix-layout or not. Change-Id: Icd96986f7af705744131d62e7f1456114ac1ee53 BUG: 1196615 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/9764 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> Reviewed-by: N Balachandran <nbalacha@redhat.com>
* cluster/dht: synchronize with other concurrent healers while healing layout.Raghavendra G2015-02-201-17/+483
| | | | | | | | | | | | | | | | | | | | | | | | | | Current layout heal code assumes layout setting is idempotent. This allowed multiple concurrent healers to set the layout without any synchronization. However, this is not the case as different healers can come up with different layout for same directory and making layout setting non-idempotent. So, we bring in synchronization among healers to 1. Not to overwrite an ondisk well-formed layout. 2. Refresh the in-memory layout with the ondisk layout if in-memory layout needs healing and ondisk layout is well formed. This patch can synchronize 1. among multiple healers. 2. among multiple fix-layouts (which extends layout to consider added or removed brick) 3. (but) not between healers and fix-layouts. So, the problem of in-memory stale layouts (not matching with layout ondisk), is not _completely_ fixed by this patch. Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Change-Id: Ia285f25e8d043bb3175c61468d0d11090acee539 BUG: 1176008 Reviewed-on: http://review.gluster.org/9302 Reviewed-by: N Balachandran <nbalacha@redhat.com>
* cluster/dht: Modified the calculation of brick_countVenkatesh Somyajulu2014-09-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Whenever new_layout is calculated for a directory, we calculate the number of childs of dht, who will get the actual(Non-zero) layout-range, and assign range to only those subvolume and other will get 0 as their layout->start and layout->stop value. This calculation is based on either a) weight_by_size or b) number of brick who will be assigned the non-zero range So if in case we are not assigning the layout based on weight_by_size, we should choose the "bricks_to_use" instead of "bricks_used". In regression test, we found that priv->du_stat[0].chunks was zero. In this case "bricks_used" variable will be zero, which will cause crash for chunk = ((unsigned long) 0xffffffff) / bricks__used; calculation. Change-Id: I6f1b21eff972a80d9eb22771087c1e2f53e7e724 BUG: 1143835 Signed-off-by: Venkatesh Somyajulu <vsomyaju@redhat.com> Reviewed-on: http://review.gluster.org/8792 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* dht: support heterogeneous brick sizesJeff Darcy2014-07-121-25/+111
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Calculation of layouts now considers the size of each brick, so that smaller bricks don't get an "unfair" share of allocations and start returning ENOSPC while the larger bricks still have plenty of space. The observation has been made that some clients might get ENOTCONN when trying to fetch disk-size information, and end up calculating layouts differently. The following meta-observations can be made. (1) This scenario is extremely unlikely in configurations with AFR. (2) The most likely consequence of this scenario is that some files will be placed sub-optimally by the client with the obsolete (non-weighted) layout. They'll still be found anyway, so this isn't a show stopper. (3) Without this patch it's *guaranteed* that some files will be placed sub-optimally, because any layout that fails to account for brick sizes is sub-optimal. (4) We shouldn't be doing fix-layout from two nodes simultaneously anyway. That's inefficient at best. Any instances of such behavior are separate bugs, which should be fixed separately. (5) In the most extreme edge case, two nodes doing weighted and non-weighted layout fixes could race and end up creating an internally inconsistent layout. This condition is still transient; it will be detected and repaired automatically the next time anyone fetches the layout. (If it's not that's also a preexisting bug that can show up in other contexts.) In conclusion, it's not the purpose of this patch to fix bugs elsewhere in DHT. Its purpose is to make life incrementally better for users who add new hardware with larger disks etc. than the older equipment. It's only one part of an ongoing process to improve layout management and repair, all the way up to support for multiple hash rings or tiering. Change-Id: I05eb6f9eface9cdaf8622e0260c8c7f29020447f BUG: 1114680 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/8093 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* DHT/LoggingNithya Balachandran2014-07-121-1/+1
| | | | | | | | | | | | | Changed the log level of a message from none to debug as none does not print a log level in the log file. Change-Id: I463d1095d69bbd0036958282da13cb8e0226f34f BUG: 1116797 Signed-off-by: Nithya Balachandran <nbalacha@redhat.com> Reviewed-on: http://review.gluster.org/8253 Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/dht: Added logging of new layout for dir-selfhealVenkatesh Somyajulu2014-07-031-0/+8
| | | | | | | | | | | | | | | | | | | | | Added a log which logs the new layout which will be used for the directory self healing It prints: a) Subvolume name b) Error --> Is needed because layout healing depends on the error and having it in log will help in debugging c) Start Starting of the layout range d) Stop Ending of the layout range Change-Id: I48c9c697716a899165ed29b737362a75c62e09b3 BUG: 1113066 Signed-off-by: Venkatesh Somyajulu <vsomyaju@redhat.com> Reviewed-on: http://review.gluster.org/8173 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/dht: Do layout self healing of directory for nameless lookupVenkatesh Somyajulu2014-06-171-0/+197
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: Currently in the nameless lookup code path, if at the end of the lookup, even if it detects that layout anamolies are there, layout healing will not be done as there is no code to heal it. So there can be race between mkdir and lookup. Assume mkdir is going on from some other mount point, Say, M1. Directories are created on some nodes but layout is not set yet. Now from M2, nameless lookup goes, lookup will be success full as the directory is present on some of the nodes, but it won't heal layout. Now if create goes after lookup fop, because layout is absent, file creation will fail. Fix: Included the code of layout self-heal in the nameless lookup path. At the end of lookup, layout will be computed as it would have been in the named lookup, but it will be set to those node only, where directory is present. So after that if create fop goes, the probabiliy to get the subvolume with proper hash-range is high now, so reduces the race window. Other: Whenever a directory is created, we have to choose a brick from which we start allocating layout in a circular fashion. To calculate this starting brick, I have changed the candidate from name of the directory to gfid of the directory But to compute where a given file belongs, we will still use the name of the file. Hash computed from the name of the file should belong to any one of the directory-hash-range Calculation of hash for a file is acting as a consumer and the setting of directory layout based on gfid is acting as a producer, which are independent from each other. Change-Id: I3808c55082cd1b5c72d2c77cbbc063f55aa38bee BUG: 1095888 Signed-off-by: Venkatesh Somyajulu <vsomyaju@redhat.com> Reviewed-on: http://review.gluster.org/7493 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/dht: Bring option to choose gfid or name based hashingVenkatesh Somyajulu2014-06-171-5/+15
| | | | | | | | | Change-Id: I11794eb2adceb88e75864aede450e904431a6273 BUG: 1095888 Signed-off-by: Venkatesh Somyajulu <vsomyaju@redhat.com> Reviewed-on: http://review.gluster.org/8049 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Cluster/DHT: New logging frameworkNithya Balachandran2014-06-161-53/+98
| | | | | | | | | | | | Moved all relevant DHT gf_log calls to the new logging framework. Change-Id: I3af3cfe0416e332774a6c4ff6a091d006c400af2 BUG: 1075611 Signed-off-by: Nithya Balachandran <nbalacha@redhat.com> Reviewed-on: http://review.gluster.org/7929 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/dht: Set quota limit key in dht_selfheal of dirs.Varun Shastry2014-01-221-4/+22
| | | | | | | | | | | | | | Also fixed check in dht_is_subvol_in_layout to check if the layouts are zero'ed out. Change-Id: I4bf8ebf66d3ef1946309b6c9aac9e79bf8a6d495 BUG: 969461 Signed-off-by: shishir gowda <sgowda@redhat.com> Signed-off-by: Varun Shastry <vshastry@redhat.com> Reviewed-on: http://review.gluster.org/6392 Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* syncop: Change return value of syncopPranith Kumar K2014-01-191-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: We found a day-1 bug when syncop_xxx() infra is used inside a synctask with compilation optimization (CFLAGS -O2). Detailed explanation of the Root cause: We found the bug in 'gf_defrag_migrate_data' in rebalance operation: Lets look at interesting parts of the function: int gf_defrag_migrate_data (xlator_t *this, gf_defrag_info_t *defrag, loc_t *loc, dict_t *migrate_data) { ..... code section - [ Loop ] while ((ret = syncop_readdirp (this, fd, 131072, offset, NULL, &entries)) != 0) { ..... code section - [ ERRNO-1 ] (errno of readdirp is stored in readdir_operrno by a thread) /* Need to keep track of ENOENT errno, that means, there is no need to send more readdirp() */ readdir_operrno = errno; ..... code section - [ SYNCOP-1 ] (syncop_getxattr is called by a thread) ret = syncop_getxattr (this, &entry_loc, &dict, GF_XATTR_LINKINFO_KEY); code section - [ ERRNO-2] (checking for failures of syncop_getxattr(). This may not always be executed in same thread which executed [SYNCOP-1]) if (ret < 0) { if (errno != ENODATA) { loglevel = GF_LOG_ERROR; defrag->total_failures += 1; ..... } the function above could be executed by thread(t1) till [SYNCOP-1] and code from [ERRNO-2] can be executed by a different thread(t2) because of the way syncop-infra schedules the tasks. when the code is compiled with -O2 optimization this is the assembly code that is generated: [ERRNO-1] 1165 readdir_operrno = errno; <<---- errno gets expanded as *(__errno_location()) 0x00007fd149d48b60 <+496>: callq 0x7fd149d410c0 <address@hidden> 0x00007fd149d48b72 <+514>: mov %rax,0x50(%rsp) <<------ Address returned by __errno_location() is stored in a special location in stack for later use. 0x00007fd149d48b77 <+519>: mov (%rax),%eax 0x00007fd149d48b79 <+521>: mov %eax,0x78(%rsp) .... [ERRNO-2] 1281 if (errno != ENODATA) { 0x00007fd149d492ae <+2366>: mov 0x50(%rsp),%rax <<----- Because it already stored the address returned by __errno_location(), it just dereferences the address to get the errno value. BUT THIS CODE NEED NOT BE EXECUTED BY SAME THREAD!!! 0x00007fd149d492b3 <+2371>: mov $0x9,%ebp 0x00007fd149d492b8 <+2376>: mov (%rax),%edi 0x00007fd149d492ba <+2378>: cmp $0x3d,%edi The problem is that __errno_location() value of t1 and t2 are different. So [ERRNO-2] ends up reading errno of t1 instead of errno of t2 even though t2 is executing [ERRNO-2] code section. When code is compiled without any optimization for [ERRNO-2]: 1281 if (errno != ENODATA) { 0x00007fd58e7a326f <+2237>: callq 0x7fd58e797300 <address@hidden><<--- As it is calling __errno_location() again it gets the location from t2 so it works as intended. 0x00007fd58e7a3274 <+2242>: mov (%rax),%eax 0x00007fd58e7a3276 <+2244>: cmp $0x3d,%eax 0x00007fd58e7a3279 <+2247>: je 0x7fd58e7a32a1 <gf_defrag_migrate_data+2287> Fix: Make syncop_xxx() return (-errno) value as the return value in case of errors and all the functions which make syncop_xxx() will need to use (-ret) to figure out the reason for failure in case of syncop_xxx() failures. Change-Id: I314d20dabe55d3e62ff66f3b4adb1cac2eaebb57 BUG: 1040356 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/6475 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* gNFS: Incorrect NFS ACL encoding for XFSSantosh Kumar Pradhan2013-09-291-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Problem: Incorrect NFS ACL encoding causes "system.posix_acl_default" setxattr failure on bricks on XFS file system. XFS (potentially others?) doesn't understand when the 0x10 prefix is added to the ACL type field for default ACLs (which the Linux NFS client adds) which causes setfacl()->setxattr() to fail silently. NFS client adds NFS_ACL_DEFAULT(0x1000) for default ACL. FIX: Mask the prefix (added by NFS client) OFF, so the setfacl is not rejected when it hits the FS. Original patch by: "Richard Wareing" Change-Id: I17ad27d84f030cdea8396eb667ee031f0d41b396 BUG: 1009210 Signed-off-by: Santosh Kumar Pradhan <spradhan@redhat.com> Reviewed-on: http://review.gluster.org/5980 Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cluster/dht: assign layout onto missing directories tooAnand Avati2013-09-091-4/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | The current self-healing algorithm is ignoring missing directories for assigning new layout. When lookup() is racing against mkdir() or when self-healing a half-done mkdir(), the layout assignment split must happen based on the final number of directories, and not the currently existing number of directories (because we finish mkdir() of missing directories before hash layout assignment). Without this fix, concurrent mkdir() and lookup() will step on each others feet, create a messed up layout on disk, and end up with different in-memory layouts. Once two clients have different in-memory layouts, creation of subdirectory will not arbitrate on the same hashed subvolume and will result in GFID mismatch of the sub-directory. Change-Id: Ia47acad67c265060405984c822b4d37512b9dbb3 BUG: 907072 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/5849 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Peter Portante <pportant@redhat.com> Tested-by: Peter Portante <pportant@redhat.com>
* cluster/dht: Ignore decommissioned subvol in overlap optimizationshishir gowda2013-05-241-0/+7
| | | | | | | | | | Change-Id: Ib727948c6e21b19fd509f258ff0aea1c5d1a84d1 BUG: 966845 Signed-off-by: shishir gowda <sgowda@redhat.com> Reviewed-on: http://review.gluster.org/5056 Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* cluster/distribute: Ignore non-participating subvols for layout checksshishir gowda2013-04-091-3/+65
| | | | | | | | | | | | | | | | | | | | | | | When subvols-per-directory is < available subvols, then there are layouts which are not populated. This leads to incorrect identification of holes or overlaps. We need to ignore layouts, which have err == 0, and start == stop. In the current scenario (start == stop == 0). Additionally, in layout-merge, treat missing xattrs as err = 0. In case of missing layouts, anomalies will reset them. For any other valid subvoles, err != 0 in case of layouts being zeroed out. Also reverted back dht_selfheal_dir_xattr, which does layout calculation only on subvols which have errors. Change-Id: I9f57062722c9e8a26285e10675c31a78921115a1 BUG: 921408 Signed-off-by: shishir gowda <sgowda@redhat.com> Reviewed-on: http://review.gluster.org/4668 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* dht: make DHT xattr names configurableJeff Darcy2013-03-211-3/+5
| | | | | | | | | | | | | | | | | | | | This is necessary to support "DHT over DHT" configurations, so that the upper and lower instances of DHT don't step all over each other. Why would we even consider such a thing? Because it gives us the ability to do data tiering and rack-aware placement, either by themselves or as complements to other functionality such as erasure codes or deduplication which save space but cost performance. By setting up the top-level DHT to place data into one of several lower-level DHT pools based on policy instead of pure elastic hashing, we get better performance for 90% of accesses and better storage efficiency for 90% of data, all for relatively low effort. Change-Id: I72e65c29edfc80babf39f7a2a00090f4588c4070 BUG: 924265 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/4694 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* dht: fix a typoJulesWang2013-03-181-1/+1
| | | | | | | | | Change-Id: Id6f156957e58aad06bf2602f880c7e4102b80fd1 BUG: 764890 Signed-off-by: JulesWang <w.jq0722@gmail.com> Reviewed-on: http://review.gluster.org/4679 Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* cluster/distribute: Fix layout overlaps due to spread-count in selfheal pathshishir gowda2013-03-071-50/+12
| | | | | | | | | | | | | | | | We needed to zero out the layout range, before we re-calculate the range. When spread-count is issued, we would end up with stale ranges in the layout. Replaced dht_selfheal_dir_xattr with dht_fix_dir_xattr, which correctly resets the un-used (after re-cal) layouts. Change-Id: I1a900d15df07335f59356bd23182ccec34381ab2 BUG: 884455 Signed-off-by: shishir gowda <sgowda@redhat.com> Reviewed-on: http://review.gluster.org/4647 Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* distribute: add hash-name-regex optionJeff Darcy2013-02-181-1/+1
| | | | | | | | | | | | | | | | | | | | | This is to support the common "write to temp file then rename" idiom. In our case this causes us to create a linkfile during the rename in (N-1)/N cases, with a significant impact on performance e.g. for UFO which uses this idiom. This patch allows the user to specify up to two regular expressions that separate the permanent and transient parts of a temp-file name: rsync-hash-regex reimplements the existing RSYNC_FRIENDLY_NAME pattern where the temporary name for EXAMPLE is .EXAMPLE.suffix extra-hash-regex can be used for a second pattern, active concurrently, and can include alternatives via the POSIX extended-regex syntax Change-Id: Ic1a6ed19324bc31fefe91ee34b8478877a9c5d2c BUG: 912564 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/4116 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* dht: better layout-optimization algorithmJeff Darcy2013-02-071-22/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This method deals with the case where swapping might gain a bigger overlap for the xlator currently under consideration, but sacrifices even more from the xlator we're swapping with. For example: A = 0x00000000 - 0x44444443 (new 0x00000000 - 0x55555554) B = 0x44444444 - 0x77777776 (new 0x55555555 - 0xaaaaaaa9) C = 0x77777777 - 0xffffffff (new 0xaaaaaaaa - 0xffffffff) Here, the new range for B has a bigger overlap with the old C than with the old B (0x33333333 vs. 0x22222222 to be precise) so looking only at that might lead us to swap. However, such a swap turns the new C's overlap from 0x55555556 (vs. old C) to *zero* (vs. old B). In other words, we've gained 0x11111111 for B but lost 0x55555556 for C, so it's a bad idea. The new algorithm accounts for all effects of the swap, so it not only avoids bad swaps but can make some good ones that would have been missed previously. For example, if swapping a range X with a later range Y would not increase the overlap for X we would previously have skipped it even if the swap would increase Y's overlap without affecting X's. This is the normal case when we're adding a new brick (which initially has zero overlap with any old range) so finding more good swaps is probably even more important than avoiding bad ones. Also, the logic in dht_overlap_calc was completely broken before, causing integer overflows instead of providing correct values, so no matter what higher-level algorithm was in place the GIGO effect would have resulted in bad decisions. Change-Id: If61ed513cfcb931916c6b51da293e3efbaaf385f BUG: 853258 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/3908 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cluster/distribute: get_layout should account only available subvolsv3.4.0qa7shishir gowda2013-01-231-4/+3
| | | | | | | | | | | | | | | | The earlier logic used to check if (layout-spread-count <= subvol_cnt - decommissioned bricks). With this if a subvol was down, and layout-spread was > upsubvols, a mkdir ended up creating holes in the layout. The fix is to consider only the combination of subvols which are usable (not down or not decommissioned). Change-Id: I61ad3bcaf4589f5a75f7887cfa595c98311ae3bb BUG: 902610 Signed-off-by: shishir gowda <sgowda@redhat.com> Reviewed-on: http://review.gluster.org/4412 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cluster/distribute: re-set layouts to prevent overlapsshishir gowda2012-12-111-8/+38
| | | | | | | | | | | | | | | | | When subvols-per-directory option is used, with bricks addition/removal the layouts might get distributed to other subvols, which were not part of the layout before. We need to clean up layouts on old subvolumes, to prevent overlaps. Also, we need to make sure if layout-cnt is never less than subvolume-cnt. Change-Id: I00994a092ca0c99aedcc41bd9412d43460f88a04 BUG: 884455 Signed-off-by: shishir gowda <sgowda@redhat.com> Reviewed-on: http://review.gluster.org/4281 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cluster/dht: fail fix-layout if any of the subvol is downshishir gowda2012-11-291-23/+20
| | | | | | | | | | | | | | | | If any subvolume is down, and a layout is re-written and hash values change, entry names in the downed subvol can be reused in the other subvol which got the same hash range. when the downed subvol is brought back up, duplicate entried might appear Also separated handling of ENOSPC and ENOTCONN error. Change-Id: I5ed93990425a4cee70df2dab7c7c119fdc87ad56 BUG: 860663 Signed-off-by: shishir gowda <sgowda@redhat.com> Reviewed-on: http://review.gluster.org/4000 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* cluster/dht: Heal dir uid/gidshishir gowda2012-11-291-0/+47
| | | | | | | | | | | | Identify mismatching uid/gid in lookup, and trigger a syncop heal. uid/gid of subvol with latest ctime is trusted (local->prebuf). Change-Id: Ib5c4bc438e7f4b1f33080e73593f40f400e997f0 BUG: 862967 Signed-off-by: shishir gowda <sgowda@redhat.com> Reviewed-on: http://review.gluster.org/3964 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* dht: improve dht_fix_layout_of_directory for better re-assignmentAnand Avati2012-09-121-145/+78
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Jeff Darcy wrote: > AFAICT, the fix-layout code doesn't do the same rotation that the > new-directory code does. Therefore, the new bricks always claim > completely predictable hash ranges for every directory, leading to > either a 0-1-2-3 pattern or a 1-0-2-3 pattern. In other words, a > file whose hash falls into the second quarter of the range will always > be assigned to brick 2, and a file whose hash falls into the fourth > quarter will always be assigned to brick 3. The rest will be split > according to the original pattern. Put still another way, instead of > same-named files in different directories being spread across N bricks, > they might be spread across only two bricks (bad) or totally > concentrated on one brick (worse) regardless of N. The current dht_fix_layout_of_directory() code, in an attempt to maximize overlap of new layout with existing layout (to minimize movement of data) fails to do a good job of randomizing new assignment even when it could do a better job. In an example where we expand from 2 nodes to 4 nodes, the current possibilities are limited in the following way - (theoretical hash range: 00 - 99) OLD 1 ----- server1: 00 - 49 server2: 50 - 99 NEW 1 ----- server1: 00 - 24 server2: 50 - 74 server3: 25 - 49 server4: 75 - 99 OLD 2 ----- server1: 50 - 99 server2: 00 - 49 NEW 2 ------ server1: 50 - 74 server2: 00 - 24 server3: 25 - 49 server4: 75 - 99 The above shows that when add-brick from 2 bricks to 4 bricks, server3 and server4 always get the _same_ hash range no matter what the original hash range assignment was. The fix in this patch is first do the standard new directory assignment to a directory (with rotation etc.) and then do the reassignment to maximize overlap. This way newly added servers still get random ranges and existing servers have a probability of getting either of the quarters which were part of its half previously. The same principles hold for all add-brick from M to M+N. Change-Id: I0cbbf3bfa334645728072d66aaaa80120d0b295f BUG: 853258 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/3883 Tested-by: Gluster Build System <jenkins@build.gluster.com>
* remove useless if-before-free (and free-like) functionsJim Meyering2012-07-131-4/+2
| | | | | | | | | | | | See comments in http://bugzilla.redhat.com/839925 for the code to perform this change. Signed-off-by: Jim Meyering <meyering@redhat.com> BUG: 839925 Change-Id: I10e4ecff16c3749fe17c2831c516737e08a3205a Reviewed-on: http://review.gluster.com/3661 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* distribute: support user-specified layouts.Jeff Darcy2012-05-311-1/+7
| | | | | | | | | | | | | The new type is DHT_HASH_TYPE_DM_USER=1 (on disk in network byte order) and we treat it the same as DHT_HASH_TYPE_DM except that we don't stomp on it during rebalance. Change-Id: I893571a9b89577acdea2fe868915b18d3663fd77 BUG: 807312 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.com/3004 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>