summaryrefslogtreecommitdiffstats
path: root/xlators/cluster/dht/src/dht-common.h
Commit message (Collapse)AuthorAgeFilesLines
* cluster/dht: make rebalance use truncate incaseSusant Palai2017-11-221-2/+1
| | | | | | | | | .. the brick file system does not support fallocate. Change-Id: Id76cda2d8bb3b223b779e5e7a34f17c8bfa6283c BUG: 1488103 Signed-off-by: Susant Palai <spalai@redhat.com>
* core: make gf_boolean_t a C99 bool instead of an enumJeff Darcy2017-11-031-0/+1
| | | | | | | | | | | | This reduces the space used from four bytes to one, and allows new code to use familiar C99 types/values interoperably with our old cruft. It does *not* change current declarations or code; that will be left for a separate - much larger - patch. Updates: #80 Change-Id: I5baedd17d3fb05b38f0d8b8bb9dd62824475842e Signed-off-by: Jeff Darcy <jdarcy@fb.com>
* cluster/dht: Don't store the entire uuid for subvolsN Balachandran2017-10-101-6/+12
| | | | | | | | | | | | Comparing the uuid string of the local node against that stored in the local_subvol information is inefficient, especially as it is done for every file to be migrated. The code has now been changed to set the value of info to 1 if the nodeuuid is that of the node making the comparison so this becomes an integer comparison. Change-Id: I7491d59caad3b71dbf5facc94dcde0cd53962775 BUG: 1451434 Signed-off-by: N Balachandran <nbalacha@redhat.com>
* cluster/dht : User xattrs are not healed after brick stop/startMohit Agrawal2017-10-041-11/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: In a distributed volume custom extended attribute value for a directory does not display correct value after stop/start or added newly brick. If any extended(acl) attribute value is set for a directory after stop/added the brick the attribute(user|acl|quota) value is not updated on brick after start the brick. Solution: First store hashed subvol or subvol(has internal xattr) on inode ctx and consider it as a MDS subvol.At the time of update custom xattr (user,quota,acl, selinux) on directory first check the mds from inode ctx, if mds is not present on inode ctx then throw EINVAL error to application otherwise set xattr on MDS subvol with internal xattr value of -1 and then try to update the attribute on other non MDS volumes also.If mds subvol is down in that case throw an error "Transport endpoint is not connected". In dht_dir_lookup_cbk| dht_revalidate_cbk|dht_discover_complete call dht_call_dir_xattr_heal to heal custom extended attribute. In case of gnfs server if hashed subvol has not found based on loc then wind a call on all subvol to update xattr. Fix: 1) Save MDS subvol on inode ctx 2) Check if mds subvol is present on inode ctx 3) If mds subvol is down then call unwind with error ENOTCONN and if it is up then set new xattr "GF_DHT_XATTR_MDS" to -1 and wind a call on other subvol. 4) If setxattr fop is successful on non-mds subvol then increment the value of internal xattr to +1 5) At the time of directory_lookup check the value of new xattr GF_DHT_XATTR_MDS 6) If value is not 0 in dht_lookup_dir_cbk(other cbk) functions then call heal function to heal user xattr 7) syncop_setxattr on hashed_subvol to reset the value of xattr to 0 if heal is successful on all subvol. Test : To reproduce the issue followed below steps 1) Create a distributed volume and create mount point 2) Create some directory from mount point mkdir tmp{1..5} 3) Kill any one brick from the volume 4) Set extended attribute from mount point on directory setfattr -n user.foo -v "abc" ./tmp{1..5} It will throw error " Transport End point is not connected " for those hashed subvol is down 5) Start volume with force option to start brick process 6) Execute getfattr command on mount point for directory 7) Check extended attribute on brick getfattr -n user.foo <volume-location>/tmp{1..5} It shows correct value for directories for those xattr fop were executed successfully. Note: The patch will resolve xattr healing problem only for fuse mount not for nfs mount. BUG: 1371806 Signed-off-by: Mohit Agrawal <moagrawa@redhat.com> Change-Id: I4eb137eace24a8cb796712b742f1d177a65343d5
* cluster/dht: EBADF handling for fremovexattr and fsetxattrN Balachandran2017-08-091-0/+6
| | | | | | | | | | | | | Add EBADF handling for dht_fremovexattr and dht_fsetxattr. Change-Id: Ide0d5812dae79655d2565157e5baabcd753b4309 BUG: 1476665 Signed-off-by: N Balachandran <nbalacha@redhat.com> Reviewed-on: https://review.gluster.org/17999 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* cluster/dht: Check for open fd only on EBADFN Balachandran2017-08-081-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | DHT fd based fops used to check if the fd was open on the cached subvol before winding the call. However, this introduced a performance regression of about 30% for reads. This check was introduced to handle cases where files were migrated while IOs were happening. As this is not the common case, dht will now check if the fd is open on the cached subvol only if the call fails with EBADF. This will prevent a performance hit where a rebalance is not running. Change-Id: I2035a858d63c3fcd22bb634055bbb0ad01686808 BUG: 1476665 Signed-off-by: N Balachandran <nbalacha@redhat.com> Reviewed-on: https://review.gluster.org/17976 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Susant Palai <spalai@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* cluster/rebalance: Fix hardlink migration failuresSusant Palai2017-07-131-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A brief about how hardlink migration works: - Different hardlinks (to the same file) may hash to different bricks, but their cached subvol will be same. Rebalance picks up the first hardlink, calculates it's hash(call it TARGET) and set the hashed subvolume as an xattr on the data file. - Now all the hardlinks those come after this will fetch that xattr and will create linkto files on TARGET (all linkto files for the hardlinks will be hardlink to each other on TARGET). - When number of hardlinks on source is equal to the number of hardlinks on TARGET, the data migration will happen. RACE:1 Since rebalance is multi-threaded, the first lookup (which decides where the TARGET subvol should be), can be called by two hardlink migration parallely and they may end up creating linkto files on two different TARGET subvols. Hence, hardlinks won't be migrated. Fix: Rely on the xattr response of lookup inside gf_defrag_handle_hardlink since it is executed under synclock. RACE:2 The linkto files on TARGET can be created by other clients also if they are doing lookup on the hardlinks. Consider a scenario where you have 100 hardlinks. When rebalance is migrating 99th hardlink, as a result of continuous lookups from other client, linkcount on TARGET is equal to source linkcount. Rebalance will migrate data on the 99th hardlink itself. On 100th hardlink migration, hardlink will have TARGET as cached subvolume. If it's hash is also the same, then a migration will be triggered from TARGET to TARGET leading to data loss. Fix: Make sure before the final data migration, source is not same as destination. RACE:3 Since a hardlink can be migrating to a non-hashed subvolume, a lookup from other client or even the rebalance it self, might delete the linkto file on TARGET leading to hardlinks never getting migrated. This will be addressed in a different patch in future. Change-Id: If0f6852f0e662384ee3875a2ac9d19ac4a6cea98 BUG: 1469964 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: https://review.gluster.org/17755 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: N Balachandran <nbalacha@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* cluster/dht: Use size to calculate estimatesN Balachandran2017-07-101-0/+5
| | | | | | | | | | | | | | | | | | | The earlier approach of using the number of files to determine when the rebalance would complete did not work well when file sizes differed widely. The new approach now gets the total data size and uses that information to determine how long the rebalance is expected to take. Change-Id: I84e80a0893efab72ff06130e4596fa71c9c8c868 BUG: 1467209 Signed-off-by: N Balachandran <nbalacha@redhat.com> Reviewed-on: https://review.gluster.org/17668 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: MOHIT AGRAWAL <moagrawa@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* cluster/dht: Check if fd is opened on dst subvolN Balachandran2017-06-281-0/+67
| | | | | | | | | | | | | | | | | | | | If an fd is opened on a file, the file is migrated and the cached subvol is updated in the inode_ctx before an fd based fop is sent, the fop is sent to the dst subvol on which the fd is not opened. This causes the FOP to fail with EBADF. Now, every fd based fop will check to see that the fd has been opened on the dst subvol before winding it down. Change-Id: Id92ef5eb7a5b5226688e2d2868b15e383f5f240e BUG: 1465075 Signed-off-by: N Balachandran <nbalacha@redhat.com> Reviewed-on: https://review.gluster.org/17630 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-by: Susant Palai <spalai@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* cluster/dht: rebalance gets file count periodicallyN Balachandran2017-06-231-0/+3
| | | | | | | | | | | | | | | | The rebalance used to get the file count in the beginning and not update it. This caused estimates to fail if the number changed during the rebalance. The rebalance now updates the file count periodically. Change-Id: I1667ee69e8a1d7d6bc6bc2f060fad7f989d19ed4 BUG: 1464110 Signed-off-by: N Balachandran <nbalacha@redhat.com> Reviewed-on: https://review.gluster.org/17607 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* dht/hardlink : Remove stale linkto file incase of failureJiffin Tony Thottan2017-06-221-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a similar issue fixed for rename in https://review.gluster.org/#/c/16016/ For hardlinks, if cached and hashed subvolumes are different, then it will first create linkto file in hashed using root permission, but actually hardlink creation fails with EACESS and stale linkto file is never removed.All the followup hardlink calls with file name will result ESTALE because linktofile creation fails with EEXIST and follow up lookup on linkto file returns gfid-mismatching(old linkto file) and finally fails with ESTALE Steps to produce : (From link/00.t test from posix-testsuite) Steps executed in script * create a file "abc" using root * change the ownership of file to a non root user * create hardlink "link" for "abc" using a non root user, it fails with EACESS * delete "abc" * create directory "abc" using root * again try to create hadrlink "link" for "abc" using non root user, fails with ESTALE Also tried to fix other bugs in dht_linkfile_create_cbk() and posix_lookup. Thanks Susant for the help in debugging the issue and suggestion for this patch. Change-Id: I7a5a1899d3fd1fdb13578b37f9d52a084492e35d BUG: 1452084 Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> Reviewed-on: https://review.gluster.org/17331 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: N Balachandran <nbalacha@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* cluster/dht: Include dirs in rebalance estimatesN Balachandran2017-06-071-2/+3
| | | | | | | | | | | | | | | | | Empty directories were not being considered while calculating rebalance estimates leading to negative time-left values being displayed as part of the rebalance status. Change-Id: I48d41d702e72db30af10e6b87b628baa605afa98 BUG: 1457985 Signed-off-by: N Balachandran <nbalacha@redhat.com> Reviewed-on: https://review.gluster.org/17448 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* cluster/dht: Make optimal usage of buffer provided with readdir(p)Sakshi2017-05-311-0/+4
| | | | | | | | | | | | | | | | | | | dht_readdirp must unwind with list of entries only after the entire buffer requested by kernel is filled to avoid extra syscalls occuring when returning partially filled buffer. Also wind readdir call to next subvol on reaching EOD for directory on that subvol to avoid extra network call. Change-Id: If2e1a2722f813d95457c7542bff25fef56c7a041 BUG: 1356453 Signed-off-by: Sakshi <sabansal@redhat.com> Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: https://review.gluster.org/12271 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Susant Palai <spalai@redhat.com>
* cluster/dht: fix on demand migration files from clientSusant Palai2017-05-301-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On demand migration of files i.e. migration done by clients triggered by a setfattr was broken. Dependency on defrag led to crash when migration was triggered from client. Note: This functionality is not available for tiered volumes. Migration from tier served client will fail with ENOTSUP. usage (But refer to the steps mentioned below to avoid any issues) : setfattr -n "trusted.distribute.migrate-data" -v "1" <filename> The purpose of fixing the on-demand client migration was to give a workaround where the user has lots of empty directories compared to files and want to do a remove-brick process. Here are the steps to trigger file migration for remove-brick process from client. (This is highly recommended to follow below steps as is) Let's say it is a replica volume and user want to remove a replica pair named brick1 and brick2. (Make sure healing is completed before you run these steps) Step-1: Start remove-brick process - gluster v remove-brick <volname> brick1 brick2 start Step-2: Kill the rebalance daemon - ps aux | grep glusterfs | grep rebalance\/ | awk '{print $2}' | xargs kill Step-3: Do a fresh mount as mentioned here - glusterfs -s ${localhostname} --volfile-id rebalance/$volume-name /tmp/mount/point Step-4: Go to one of the bricks (among brick1 and brick2) - cd <brick1 path> Step-5: Run the following command. - find . -not \( -path ./.glusterfs -prune \) -type f -not -perm 01000 -exec bash -c 'setfattr -n "distribute.fix.layout" -v "1" ${mountpoint}/$(dirname '{}')' \; -exec setfattr -n "trusted.distribute.migrate-data" -v "1" ${mountpoint}/'{}' \; This command will ignore the linkto files and empty directories. Do a fix-layout of the parent directory. And trigger a migration operation on the files. Step-6: Once this process is completed do "remove-brick force" - gluster v remove-brick <volname> brick1 brick2 force Note: Use the above script only when there are large number of empty directories. Since the script does a crawl on the brick side directly and avoids directories those are empty, the time spent on fixing layout on those directories are eliminated(even if the script does not do fix-layout on empty directories, post remove-brick a fresh layout will be built for the directory, hence not affecting application continuity). Detailing the expectation for hardlink migartion with this patch: Hardlink is migrated only for remove-brick process. It is highly essential to have a new mount(step-3) for the hardlink migration to happen. Why?: setfattr operation is an inode based operation. Since, we are doing setfattr from fuse mount here, inode_path will try to build path from the linked dentries to the inode. For a file without hardlinks the path construction will be correct. But for hardlinks, the inode will have multiple dentries linked. Without fresh mount, inode_path will always get the most recently linked dentry. e.g. if there are three hardlinks named dir1/link1, dir2/link2, dir3/link3, on a client where these hardlinks are looked up, inode_path will always return the path dir3/link3 if dir3/link3 was looked up most recently. Hence, we won't be able to create linkto files for all other hardlinks on destination (read gf_defrag_handle_hardlink for more details on hardlink migration). With a fresh mount, the lookup and setfattr become serialized. e.g. link2 won't be looked up until link1 is looked up and migrated. Hence, inode_path will always have the correct path, in this case link1 dentry is picked up(as this is the most recently looked up inode) and the path is built right. Note: If you run the above script on an existing mount(all entries looked up), hard links may not be migrated, but there should not be any other issue. Please raise a bug, if you find any issue. Tests: Manual Change-Id: I9854cdd4955d9e24494f348fb29ba856ea7ac50a BUG: 1450975 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: https://review.gluster.org/17115 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* cluster/dht: Rebalance on all nodes should migrate filesN Balachandran2017-05-161-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: Rebalance compares the node-uuid of a file against its own to and migrates a file only if they match. However, the current behaviour in both AFR and EC is to return the node-uuid of the first brick in a replica set for all files. This means a single node ends up migrating all the files if the first brick of every replica set is on the same node. Fix: AFR and EC will return all node-uuids for the replica set. The rebalance process will divide the files to be migrated among all the nodes by hashing the gfid of the file and using that value to select a node to perform the migration. This patch makes the required DHT and tiering changes. Some tests in rebal-all-nodes-migrate.t will need to be uncommented once the AFR and EC changes are merged. Change-Id: I5ce41600f5ba0e244ddfd986e2ba8fa23329ff0c BUG: 1366817 Signed-off-by: N Balachandran <nbalacha@redhat.com> Reviewed-on: https://review.gluster.org/17239 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* cluster/dht: Make rebalance throttle option tuned by numberSusant Palai2017-04-291-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current rebalance throttle options: lazy/normal/aggressive may not always be sufficient for the purpose of throttling. In our recent test, we observed for certain setups, normal and aggressive modes behaved similarly consuming full disk bandwidth. So in cases like this admin should be able to tune it down(or vice versa) depending on the need. Along with old throttle configurations, thread counts are tuned based on number. e.g. gluster v set vol-name cluster-rebal.throttle 5. Admin can tune up/down between 0 and the number of cores available. Note: For heterogenous servers, validation will fail on the old server if "number" is given for throttle configuration. The message looks something like this: "volume set: failed: Staging failed on vm2. Error: cluster.rebal-throttle should be {lazy|normal|aggressive}" Test: Manual test by logging active thread number after reconfiguring throttle option. testcase: tests/basic/distribute/throttle-rebal.t Change-Id: I46e3cde546900307831028b344ecf601fd9b02c3 BUG: 1438370 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: https://review.gluster.org/16980 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* cluster/dht: rebalance perf enhancementSusant Palai2017-04-291-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: Throttle settings "normal" and "aggressive" for rebalance did not have performance difference. normal mode spawns $(no. of cores - 4)/2 threads and aggressive spawns $(no. of cores - 4) threads. Though aggressive mode has twice the number of threads compared to that of normal mode, there was no performance gain when switched to aggressive mode from normal mode. RCA: During the course of debugging the above problem, we tried assigning migration job to migration threads spawned by rebalance, rather than synctasks(as there is more overhead associated to manage the task queue and threads). This gave us a significant improvement over rebalance under synctasks. This patch does not really gurantee that there will be a clear performance difference between normal and aggressive mode, but this patch certainly maximized the disk utilization for 1GBfiles run. Results: Test enviroment: Gluster Config: Number of Bricks: 2 (one brick per disk(RAID-6 12 disk)) Bricks: Brick1: server1:/brick/test1/1 Brick2: server2:/brick/test1/1 Options Reconfigured: performance.readdir-ahead: on server.event-threads: 4 client.event-threads: 4 1000 files with 1GB each were created/renamed such that all files will have server1 as cached and server2 as hashed, so that all files will be migrated. Test machines had 24 cores each. Results with/without synctask based migration: ----------------------------------------------- mode normal(10threads) aggressive(20threads) timetaken 0:55:30 (h:m:s) 0:56:3 (h:m:s) withsynctask timetaken with migrator 0:38:3 (h:m:s) 0:23:41 (h:m:s) threads From above table it can be seen that, there is a clear 2x perf gain between rebalance with synctask vs rebalance with migrator threads. Additionally this patch modifies the code so that caller will have the exact error number returned by dht_migrate_file(earlier the errno meaning was overloaded). This will help avoiding scenarios where migration failure due to ENOENT, can result in rebalance abort/failure. Change-Id: I8904e2fb147419d4a51c1267be11a08ffd52168e BUG: 1420166 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: https://review.gluster.org/16427 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: N Balachandran <nbalacha@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* feature/dht: Directory synchronizationKotresh HR2017-04-261-52/+51
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Design doc: https://review.gluster.org/16876 Directory creation is now synchronized with blocking inodelk of the parent on the hashed subvolume followed by the entrylk on the hashed subvolume between dht_mkdir, dht_rmdir, dht_rename_dir and lookup selfheal mkdir. To maintain internal consistency of directories across all subvols of dht, we need locks. Specifically we are interested in: 1. Consistency of layout of a directory. Only one writer should modify the layout at a time. A writer (layout setting during directory heal as part of lookup) shouldn't modify the layout while there are readers (all other fops like create, mkdir etc., which consume layout) and readers shouldn't read the layout while a writer is in progress. Readers can read the layout simultaneously. Writer takes a WRITE inodelk on the directory (whose layout is being modified) across ALL subvols. Reader takes a READ inodelk on the directory (whose layout is being read) on ANY subvol. 2. Consistency of directory namespace across subvols. The path and associated gfid should be same on all subvols. A gfid should not be associated with more than one path on any subvol. All fops that can change directory names (mkdir, rmdir, renamedir, directory creation phase in lookup-heal) takes an entrylk on hashed subvol of the directory. NOTE1: In point 2 above, since dht takes entrylk on hashed subvol of a directory, the transaction itself is a consumer of layout on parent directory. So, the transaction is a reader of parent layout and does an inodelk on parent directory just like any other layout reader. So a mkdir (dir/subdir) would: > Acquire a READ inodelk on "dir" on any subvol. > Acquire an entrylk (dir, "subdir") on hashed subvol of "subdir". > creates directory on hashed subvol and possibly on non-hashed subvols. > UNLOCK (entrylk) > UNLOCK (inodelk) NOTE2: mkdir fop while setting the layout of the directory being created is considered as a reader, but NOT a writer. The reason is for a fop which can consume the layout of a directory to come either of the following conditions has to be true: > mkdir syscall from application has to complete. In this case no need of synchronization. > A lookup issued on the directory racing with mkdir has to complete. Since layout setting by a lookup is considered as a writer, only one of either mkdir or lookup will set the layout. Code re-organization: All the lock related routines are moved to "dht-lock.c" file. New wrapper function is introduced to take blocking inodelk followed by entrylk 'dht_protect_namespace' Updates #191 Change-Id: I01569094dfbe1852de6f586475be79c1ba965a31 Signed-off-by: Kotresh HR <khiremat@redhat.com> BUG: 1443373 Reviewed-on: https://review.gluster.org/15472 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org>
* cluster/dht: Skip file migration if the subvol that meets min-free-diskSusant Palai2017-04-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | criteria happens to be the same subvol containing data-file Rebalance need to figure out a new subvol in case the hashed subvol does not have enough space. In the process of figuring out the new subvol, we need to ignore the source subvol, otherwise it will lead to data loss. Test: Manual Ran the following sizeof /tmp/1: 1.5GB sizeof /brick/1: 16GB sizeof /tmp/2: 1.5GB <start> glusterd; gluster v create test1 vm1:/brick/1 vm1:/tmp/1; gluster v start test1; mount -t glusterfs vm1:test1 /mnt; for i in {1..2000} do dd if=/dev/zero of=/mnt/file$i bs=1KB count=1 &> /dev/null; done gluster v add-brick test1 vm1:/tmp/2 gluster v set test1 min-free-disk 12GB gluster v remove-brick test1 vm1:/tmp/1 star <end> file count and data were intact. Change-Id: Ib8fc8467a3d48a7c12958824c4f0b88e160b86c1 BUG: 1441508 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: https://review.gluster.org/17064 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* cluster/dht: Make rebalance honor min-free-diskSusant Palai2017-04-131-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | test: Manual created files of size 1K on 2 brick(of size 1GB) setup . added a brick of size 16GB. set min-free-disk to 12GB(so that first two bricks won't receive any files). removed one of the 1st brick of size 1GB. Logs from test: [2017-04-12 08:52:08.196484] W [MSGID: 0] [dht-rebalance.c:895:__dht_check_free_space] 0-test1-dht: Write will cross min-free-disk for file - /tile32 on subvol - test1-client-1. Looking for new subvol. [2017-04-12 08:52:08.196904] I [MSGID: 0] [dht-rebalance.c:925:__dht_check_free_space] 0-test1-dht: new target found - test1-client-2 for file - /tile32 - Post migration we have two files. The new destination (/brick/1) has the data file [root@vm1 ~]# ll /brick/1/tile32 -rw-r--r--. 2 root root 0 Apr 12 14:22 /brick/1/tile32 - On the old target the linkto file is there with linkto xattr pointing to /brick/1 [root@vm1 ~]# ll /tmp/2/tile32 ---------T. 2 root root 1000 Apr 12 14:22 /tmp/2/tile32 [root@vm1 ~]# getfattr -m . -de text /tmp/2/tile32 getfattr: Removing leading '/' from absolute path names security.selinux="unconfined_u:object_r:user_tmp_t:s0" trusted.gfid="����:Aс�#�/'b2" trusted.glusterfs.dht.linkto="test1-client-2" Marking ./tests/features/worm_sh.t as bad test. Reason being, this patch failed on master branch as well and it has nothing to do with rebalance/remove-brick. BUG: 1441508 Change-Id: I90bae251cda3d957a49cdceda90cd08311a392fb Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: https://review.gluster.org/17034 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* dnt: Add a GF_DEFRAG_CMD_NONE to gf_defrag_typeMichael Scherer2017-02-261-0/+1
| | | | | | | | | | | | | | | Coverity complain about enum mismatch since we assign GF_OP_CMD_NONE to a variable holding gf_defrag_type. Change-Id: I63e71f552b3cc752c26c1b8705420f38908e17e6 BUG: 789278 Signed-off-by: Michael Scherer <misc@redhat.com> Reviewed-on: https://review.gluster.org/16756 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> Tested-by: Michael Scherer <misc@fedoraproject.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* tier : Tier as a servicehari gowtham2017-01-161-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | tierd is implemented by separating from rebalance process. The commands affected: 1) Attach tier will trigger this process instead of old one 2) tier start and tier start force will also trigger this process. 3) volume status [tier] will show tier daemon as a process instead of task and normal tier status and tier detach status works. 4) tier stop implemented. 5) detach tier implemented separately along with new detach tier status 6) volume tier volname status will work using the changes. 7) volume set works This patch has separated the tier translator from the legacy DHT rebalance code. It now sends the RPCs from the CLI to glusterd separate to the DHT rebalance code. The daemon is now a service, similar to the snapshot daemon, and can be viewed using the volume status command. The code for the validation and commit phase are the same as the earlier tier validation code in DHT rebalance. The “brickop” phase has been changed so that the status command can use this framework. The service management framework is now used. DHT rebalance does not use this framework. This service framework takes care of : *) spawning the daemon, killing it and other such processes. *) volume set options , which are written on the volfile. *) restart and reconfigure functions. Restart is to restart the daemon at two points 1)after gluster goes down and comes up. 2) to stop detach tier. *) reconfigure is used to make immediate volfile changes. By doing this, we don’t restart the daemon. it has the code to rewrite the volfile for topological changes too (which comes into place during add and remove brick). With this patch the log, pid, and volfile are separated and put into respective directories. Change-Id: I3681d0d66894714b55aa02ca2a30ac000362a399 BUG: 1313838 Signed-off-by: hari gowtham <hgowtham@redhat.com> Reviewed-on: http://review.gluster.org/13365 Smoke: Gluster Build System <jenkins@build.gluster.org> Tested-by: hari gowtham <hari.gowtham005@gmail.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* feature/dht: undo partially successful dir renameCsaba Henk2017-01-111-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As with dht, dirs are present on all subvolumes, renaming them is a compound operation and thus a partial success + partial failure scenario is possible, resulting in an inconsistent state. For purposes of reproduction, such a scenario can easily be produced by stopping the volume, edit the volfile of a certain subvolume to get at an "option read-only on" setting, and then restart the volume. Thus those operations that are to make change on the affected subvolume will fail with EROFS. To handle such scenarios, we introduce an in-memory cache where we record the return values obtained from the subvolumes. At the final stage of the dir rename operation we check if it's a partial success/fail situation. If yes, then we perform a reverse rename op on those subvolumes where the operation succeeded. Change-Id: I3d05f74f53932cb984a918d252a7309c1009a51d BUG: 1412069 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/15739 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: N Balachandran <nbalacha@redhat.com>
* cluster/dht: Fix memory corruption while accessing regex stored inRaghavendra G2016-12-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | private If reconfigure is executed parallely (or concurrently with dht_init), there are races that can corrupt memory. One such race is modification of regexes stored in conf (conf->rsync_regex_valid and conf->extra_regex_valid) through dht_init_regex. With change [1], reconfigure codepath can get executed parallely (with itself or with dht_init) and this fix is needed. Also, a reconfigure can race with any thread doing dht_layout_search, resulting in dht_layout_search accessing regex freed up by reconfigure (like in bz 1399134). [1] http://review.gluster.org/15046 Change-Id: I039422a65374cf0ccbe0073441f0e8c442ebf830 BUG: 1399134 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/15945 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: N Balachandran <nbalacha@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* cluster/tier: handle fast demotionsMilind Changire2016-10-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Demote files on priority if hi-watermark has been breached and continue to demote until the watermark drops below hi-watermark. Monitor watermark more frequently. Trigger demotion as soon as hi-watermark is breached. Add cluster.tier-emergency-demote-query-limit option to limit number of files returned from the database query for every iteration of tier_migrate_using_query_file(). If watermark hasn't dropped below hi-watermark during the first iteration, the next iteration will be triggered approximately 1 second after tier_demote() returns to the main tiering loop. Update changetimerecorder xlator to handle query for emergency demote mode. Add tier-ctr-interface.h: Move tier and ctr interface specific macros and struct definition from libglusterfs/src/gfdb/gfdb_data_store.h to new header libglusterfs/src/tier-ctr-interface.h Change-Id: If56af78c6c81d37529b9b6e65ae606ba5c99a811 BUG: 1366648 Signed-off-by: Milind Changire <mchangir@redhat.com> Reviewed-on: http://review.gluster.org/15158 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Dan Lambright <dlambrig@redhat.com>
* cluster/dht: remove unnecessary struct memberN Balachandran2016-09-221-2/+0
| | | | | | | | | | | | | | | | Removed a structure member that was not used from dht_local_t. Skipped some unnecessary checks in dht_filter_loc_subvol_key. Change-Id: I81740b6528e063fb9cf5817e05865ff4d77aa748 BUG: 1378305 Signed-off-by: N Balachandran <nbalacha@redhat.com> Reviewed-on: http://review.gluster.org/15542 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* dht: "replica.split-brain-status" attribute value is not correctMohit Agrawal2016-09-121-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: In a distributed-replicate volume attribute "replica.split-brain-status" value does not display split-brain condition though directory is in split-brain. If directory is in split brain on mutiple replica-pairs it does not show full list of replica pairs. Solution: Update the dht_aggregate code to aggregate the xattr value in this specific condition. Fix: 1) function getChoices returns the choices from split-brain status string. 2) function add_opt adding the choices to local buffer to store in dictionary 3) For the key "replica.split-brain-status" function dht_aggregate call dht_aggregate_split_brain_xattr to prepare the list. Test: To verify the patch followed below steps 1) Create a distributed replica volume and create mount point 2) Stop heal daemon 3) Touch file and directories on mount point mkdir test{1..5};touch tmp{1..5} 4) Down brick process on one of the replica set pkill -9 glusterfsd 5) Change permission of dir on mount point chmod 755 test{1..5} 6) Restart brick process on node with force option 7) kill brick process on other node in same replica set 8) Change permission of dir again on mount point chmod 766 test{1..5} 9) Reexecute same step from 4-9 on other replica set also 10) After check heal status on server it will show dir's are in split brain on all replica sets 11) After check the replica.split-brain-status attr on mount point it will show wrong status of split brain. 12) After apply the patch the attribute shows correct value. BUG: 1368312 Change-Id: Icdfd72005a4aa82337c342762775a3d1761bbe4a Signed-off-by: Mohit Agrawal <moagrawa@redhat.com> Reviewed-on: http://review.gluster.org/15201 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* cluster/tier: add tiering eventsMilind Changire2016-09-081-0/+2
| | | | | | | | | | | | | | | | | | | | | | Add events for: * tier attach and detach * tier pause and resume * tier rising and dropping hi and lo watermarks Update eventskeygen.py with tiering events. Update cli help with: * attach: add optional force argument * detach: make force available as non-optional argument on its own Change-Id: I43990d3a8742151a4a7889bafa19cb572fe661bd BUG: 1368336 Signed-off-by: Milind Changire <mchangir@redhat.com> Reviewed-on: http://review.gluster.org/15232 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Tested-by: Dan Lambright <dlambrig@redhat.com>
* cluster/tier: Adding compaction option for metadata databasesDiogenes Nunez2016-09-041-7/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: As metadata in the database fills up, querying the database take a long time. As a result, tier migration slows down. To counteract this, we added a way to enable the compaction methods of the underlying database. The goal is to reduce the size of the underlying file by eliminating database fragmentation. NOTE: There is currently a bug where sometimes a brick will attempt to activate compaction. This happens even compaction is already turned on. The cause is narrowed down to the compact_mode_switch flipping its value. Changes: libglusterfs/src/gfdb - Added a gfdb function to compact the underlying database, compact_db() This is a no-op if the database has no such option. - Added a compaction function for SQLite3 that does the following 1) Changes the auto_vacuum pragma of the database 2) Compacts the database according to the type of compaction requested - Compaction type can be changed by changing the macro GF_SQL_COMPACT_DEF to one of the 4 compaction types in gfdb_sqlite3.h It is currently set to GF_SQL_COMPACT_INCR, or incremental vacuuming. xlators/cluster/dht/src - Added the following command-line option to enable SQLite3 compaction. gluster volume set <vol-name> tier-compact <off|on> - Added the following command-line option to change the frequency the hot and cold tier are ordered to compact. gluster volume set <vol-name> tier-hot-compact-frequency <int> gluster volume set <vol-name> tier-cold-compact-frequency <int> - tier daemon periodically sends the (new) GFDB_IPC_CTR_SET_COMPACT_PRAGMA IPC to the CTR xlator. The IPC triggers compaction of the database. The inputs are both gf_boolean_t. IPC Input: compact_active: Is compaction currently on for the db. compact_mode_switched: Did we flip the compaction switch recently? IPC Output: 0 if the compaction succeeds. Non-zero otherwise. xlators/features/changetimerecorder/src/ - When the CTR gets the compaction IPC, it launches a thread that will perform the compaction. The IPC ends after the thread is launched. To avoid extra allocations, the parameters are passed using static variables. Change-Id: I5e1433becb9eeff2afe8dcb4a5798977bf5ba0dd Signed-off-by: Diogenes Nunez <dnunez@redhat.com> Reviewed-on: http://review.gluster.org/15031 Reviewed-by: Milind Changire <mchangir@redhat.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Tested-by: Dan Lambright <dlambrig@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org>
* dht: Implement ipc fopPoornima G2016-08-271-0/+2
| | | | | | | | | | | | | | | | | | ipc is used by md-cache to communicate the list of xattrs that it is caching, to the upcall xlator. Hence implement this in dht, such that it winds to all the bricks if the ipc op is GF_IPC_MDC_TARGET_UPCALL. The ips should not fail if any of the bricks is down, as md-cache will replay the ipc late when the brick comes back up. Change-Id: Ica551a550c04cbb1240c0d211fe831c2e5eb6017 BUG: 1211863 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/15225 CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* cluster/tier: dont promote if estimated block consumption > hi watermarkMilind Changire2016-07-291-0/+1
| | | | | | | | | | | | | | | | | | Add test to fail promotion if estimated block consumption grows beyond hi watermark. Skip file migrations until next cycle if tier_get_fs_stat() fails in tier_migrate_using_query_file() Change-Id: Ice04572fa739c09109c4433e65965197482a7beb BUG: 1349284 Signed-off-by: Milind Changire <mchangir@redhat.com> Reviewed-on: http://review.gluster.org/14780 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: mohammed rafi kc <rkavunga@redhat.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com>
* cluster/tier: fix statfs for dht/tiered volumesDan Lambright2016-07-271-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | Return the correct size of the tiered volume in statfs. It should be the size of the cold tier, not the sum of the hot and cold tier, because the hot tier is a cache and not an extension of the volume's capacity. The number of free blocks, etc is the cold tier's capacity subtracted by the sum of utilization on the hot and cold tiers. Note if both tiers are part of the same file system this must be accounted for as well. The patch also fixes a pre-existing bug in the DHT/tier translators. If statfs was taken on a file, the code only calculated free space on the cached subvolume, not all subvolumes in the replica group. With the fix, this is corrected, except in the case where quota is used with the deem-statfs option set to "on". Change-Id: I2b8bcb4511edf83f12130960aad0a609fcf8f513 BUG: 1339689 Signed-off-by: Dan Lambright <dlambrig@redhat.com> Reviewed-on: http://review.gluster.org/14536 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* dht:remember locked subvol and send unlock to the sameMohammed Rafi KC2016-05-061-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | During locking we send lock request to cached subvol, and normally we unlock to the cached subvol But with parallel fresh lookup on a directory, there is a race window where the cached subvol can change and the unlock can go into a different subvol from which we took lock. This will result in a stale lock held on one of the subvol. So we will store the details of subvol which we took the lock and will unlock from the same subvol Change-Id: I47df99491671b10624eb37d1d17e40bacf0b15eb BUG: 1311002 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/13492 Reviewed-by: N Balachandran <nbalacha@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* cluster/dht: handle EREMOTE in dht lk/flushSusant Palai2016-05-011-0/+2
| | | | | | | | | | | | | | | | With lock-migration, we need to send requests to destination brick post migration. Once, the source brick marks the lock structure to be already migrated, the requests will be redirected to destination brick by dht_lk2/flush2. Change-Id: I50b14011c5ab68c34826fb7ba7f8c8d42a68ad97 BUG: 1326085 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: http://review.gluster.org/13493 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* glusterd: volume set changes for lock migrationSusant Palai2016-05-011-0/+7
| | | | | | | | | | | Change-Id: I48c6f9cdda47503615ba65882acd5eedf0a70c89 BUG: 1326085 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: http://review.gluster.org/14024 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* tier/migrator: Fetch the next query file for the next cycleJoseph Fernandes2016-04-301-0/+4
| | | | | | | | | | | | | | | | | | | | | | | Problem: When we spawn promote and demote thread, query files are build. And only query file with index 0 is picked for migration as the first query file. This may not be suitable for scenarios, where the file in the query are too big to move in the first cycle, as a result file in the other query files always get missed. We need to shuffle so that other query files also get a chance. Fix: Remember the previous first query file and shift it by one index, before the migration starts. Change-Id: I704947bcf4bab6b20b1179a6d9ae4a15a3d51bd9 BUG: 1330353 Signed-off-by: Joseph Fernandes <josferna@redhat.com> Reviewed-on: http://review.gluster.org/14068 Tested-by: Joseph Fernandes Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Tested-by: Dan Lambright <dlambrig@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* tier/dht: check for rebalance completion for EIO errorMohammed Rafi KC2016-04-251-1/+3
| | | | | | | | | | | | | | | | | When an ongoing rebalance completion check task been triggered by dht, there is a possibility of a race between afr setting subvol as non-readable and dht updates the cached subvol. In this window a write can fail with EIO. Change-Id: I42638e6d4104c0dbe893d1bc73e1366188458c5d BUG: 1329503 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/14049 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: N Balachandran <nbalacha@redhat.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* dht: Add lease() fopPoornima G2016-04-251-0/+5
| | | | | | | | | | | | | Change-Id: I0bbc2c2ef115c78393f6570815a5b80316e7e4be BUG: 1319992 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/11720 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* cluster/distribute: detect stale layouts in entry fopsRaghavendra G2016-04-221-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | dht_mkdir () { first-hashed-subvol = hashed-subvol for "bname" in in-memory layout of "parent"; inodelk (SETLKW, parent, "LAYOUT_HEAL_DOMAIN", "can be any subvol, but we choose first-hashed-subvol randomly"); { begin: hashed-subvol = hashed-subvol for "bname" in in-memory layout of "parent"; hash-range = extract hashe-range from layout of "parent"; ret = mkdir (parent/bname, hashed-subvol, hash-range); if (ret == "hash-value doesn't fall into layout stored on the brick (this error is returned by posix-mkdir)") { refresh_parent_layout (); goto begin; } } inodelk (UNLCK, parent, "LAYOUT_HEAL_DOMAIN", "first-hashed-subvol"); proceed with other parts of dht_mkdir; } posix_mkdir (parent/bname, client-hash-range) { disk-hash-range = getxattr (parent, "dht-layout-key"); if (disk-hash-range != client-hash-range) { fail-with-error ("hash-value doesn't fall into layout stored on the brick"); return 0; } continue-with-posix-mkdir; } Similar changes need to be done for dentry operations like create, symlink, link, unlink, rmdir, rename. These will be addressed in subsequent patches. This patch addresses only mkdir codepath. This change breaks stripe tests, as on some striped subvols dht layout xattrs are not set for some reason. This results in failure of mkdir. Since striped volumes are always created with dht, some tests associated with stripe also fail. So, I am making following tests changes (since stripe is out of maintainance): * modify ./tests/basic/rpc-coverage.t to not to use striped volumes * mark all (2) tests in tests/bugs/stripe/ as bad tests Change-Id: Idd1ae879f24a48303dc743c1bb4d91f89a629e25 BUG: 1323040 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/13885 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: N Balachandran <nbalacha@redhat.com>
* dht: lock on subvols to prevent lookup vs rmdir raceSakshi2016-04-051-2/+9
| | | | | | | | | | | | | | | | | | | | | | There is a possibility that while an rmdir is completed on some non-hashed subvol and proceeding to others, a lookup selfheal can recreate the same directory on those subvols for which the rmdir had succeeded. Now the deletion of the parent directory will fail with an ENOTEMPTY. To fix this take blocking inodelk on the subvols before starting rmdir. Selfheal must also take blocking inodelk before creating the entry. Change-Id: I168a195c35ac1230ba7124d3b0ca157755b3df96 BUG: 1245065 Signed-off-by: Sakshi <sabansal@redhat.com> Reviewed-on: http://review.gluster.org/13528 CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com>
* tier/dht : Attach tier fix layout to run in backgroundJoseph Fernandes2016-03-281-9/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. Spawn a thread for background fix-layout for tier process. 2. Once the fix-layout is completed a marker xttr is set on the root of volume to mark the completion of the background fixlayout, so that even if the tier process is spawned again, fixlayout will not be issued, if it was completed last time. 3. Please note that promotion of legacy files will happen eventually as the ctr lookup heal in the fixlayout slowly heals the ctr db for legacy files OR the ctr lookup heal happend due to a name lookup. 4. When a detach tier is successful in evacuation data from hot tier, we remove the marker xattr is removed. So that next attach tier runs the background tier fixlayout. what is remaining ? 1. Instead of clearing the marker xattr of tiering fix layout at the end of detach start clear it during detach commit. But the issue is detach commit is a glusterd operation and the volume is not mounted in glusterd. The reason we want to do it in detach commit is that if the admin wants to attach the same tier again, then a background fixlayout will be triggered, which would not be needed. 2. Clearing the CTR DB of the cold bricks when there is a detach commit, as it will be having entries which will be stale when the volume is used, with ctr off (ctr is switched off only when we have detach commit.) Change-Id: Ibe343572e95865325cd0eef4d0b976b626a3c0c5 BUG: 1313228 Signed-off-by: Joseph Fernandes <josferna@redhat.com> Reviewed-on: http://review.gluster.org/13491 Smoke: Gluster Build System <jenkins@build.gluster.com> Tested-by: Joseph Fernandes NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com>
* dht: report constant directory sizeJeff Darcy2016-03-201-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | Directory size is meaningless. Every filesystem has its own unpredictable way of increasing or decreasing it, based on internal data structures and even transient conditions. Some filesystems (e.g. ext4) never decrease it at all. Others (e.g. btrfs) don't even report it. Very few programs look at it, and those that do are broken. Unfortunately, one such program is GNU tar, which will complain when it sees different values because at different times we got the value from different DHT subvolumes. To avoid such problems, just report a constant value. Change-Id: Id64ce917c75b5f7ff50cb55b6e997f3b3556e7e3 BUG: 1302948 Original-author: Shyam <srangana@redhat.com> Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Signed-off-by: N Balachandran <nbalacha@redhat.com> Reviewed-on: http://review.gluster.org/13770 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/tier: add tunable to migrate files based on sizeDan Lambright2016-03-161-0/+1
| | | | | | | | | | | | | | | | | This fix adds a paramater "tier-max_promote_size" to control wether a file is migrated or not based on its size. By default the value is 0, meaning all files are migrated. If set to a non-zero value, files larger than the parameter won't be moved in tiered volumes. Change-Id: Ia6b88e9b2508935bef500d956f9192e59670fe00 BUG: 1313495 Signed-off-by: Dan Lambright <dlambrig@redhat.com> Reviewed-on: http://review.gluster.org/13570 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Joseph Fernandes
* all: fixes for clang compile warningsKaleb S KEITHLEY2016-02-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | cli/src/cli-cmd-parser.c (chenk) cli/src/cli-xml-output.c (spandit) cli/src/cli.c (chenk) libglusterfs/src/common-utils.c (vmallika) libglusterfs/src/gfdb/gfdb_sqlite3.c (jfernand +1) rpc/rpc-transport/socket/src/socket.c (?) xlators/cluster/afr/src/afr-transaction.c (?) xlators/cluster/dht/src/dht-common.h (srangana +2) xlators/cluster/dht/src/dht-selfheal.c (srangana +2) xlators/debug/io-stats/src/io-stats.c (R. Wareing) xlators/features/barrier/src/barrier.c (vshastry) xlators/features/bit-rot/src/bitd/bit-rot-scrub.h (vshankar +1) xlators/features/shard/src/shard.c (kdhananj +1) xlators/mgmt/glusterd/src/glusterd-ganesha.c (skoduri) xlators/mgmt/glusterd/src/glusterd-handler.c (atinmu) xlators/mgmt/glusterd/src/glusterd-op-sm.h (atinmu) xlators/mgmt/glusterd/src/glusterd-snapshot.c (spandit) xlators/mgmt/glusterd/src/glusterd-syncop.c (atinmu) xlators/mgmt/glusterd/src/glusterd-volgen.c (atinmu) xlators/protocol/client/src/client-messages.h (mselvaga +1) xlators/storage/bd/src/bd-helper.c (M. Mohan Kumar) xlators/storage/bd/src/bd.c (M. Mohan Kumar) xlators/storage/posix/src/posix.c (nbalacha +1) Change-Id: I85934fbcaf485932136ef3acd206f6ebecde61dd BUG: 1293133 Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/13031 CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* cluster/tier: allow db queries to be interruptableDan Lambright2016-01-071-4/+17
| | | | | | | | | | | | | | | | | | | | A query to the database may take a long time if the database has many entries. The tier daemon also sends IPC calls to the bricks which can run slowly, espcially in RHEL6. While it is possible to track down each such instance, the snapshot feature should not be affected by database operations. It requires no migration be underway. Therefore it is okay to pause tiering at any time except when DHT is moving a file. This fix implements this strategy by monitoring when control passes to DHT to migrate a file using the GF_XATTR_FILE_MIGRATE_KEY trigger. If it is not, the pause operation is successful. Change-Id: I21f168b1bd424077ad5f38cf82f794060a1fabf6 BUG: 1287842 Signed-off-by: Dan Lambright <dlambrig@redhat.com> Reviewed-on: http://review.gluster.org/13104 Reviewed-by: Joseph Fernandes Tested-by: Gluster Build System <jenkins@build.gluster.com>
* cluster/dht : Ftruncate on migrating file fails with EINVALN Balachandran2015-12-221-4/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | What: If dht_open is called on a migrating file after the inode_ctx is set, subsequent FOPs on that fd do not open the fd on the dst subvol. This is seen when the open-ftruncate-close sequence is repeatedly called on a migrating file. A second call to the sequence described above causes dht_truncate_cbk to call dht_truncate2 as the dht_inode_ctx was already set by the first call. As dht_rebalance_in_progress_check is not called, the fd is not opened on the dst subvol. On a distributed-replicate volume, this causes AFR to open the fd using afr_fix_open, but with the wrong flags, causing posix_ftruncate to fail with EINVAL. The fix: We require fd specific information to make a decision while handling migrating files. Set the fd_ctx to indicate the fd has been opened on the dst subvol and check if it has been set while processing Phase1/Phase2 checks in the FOP callback functions. Change-Id: I43cdcd8017b4a11e18afdd210469de7cd9a5ef14 BUG: 1284823 Signed-off-by: N Balachandran <nbalacha@redhat.com> Reviewed-on: http://review.gluster.org/12985 Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Tested-by: Dan Lambright <dlambrig@redhat.com>
* cluster/tier: do not block in synctask created from pause tierDan Lambright2015-12-211-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | We had run sleep() in the pause tier callback. Blocking within a synctask is dangerous. The sleep() call does not inform the synctask scheduler that a thread is no longer running. It therefore believes it is running. If a second synctask already exists, it may not be able to run. This occurs if the thread limit in the pool has been reached. Note the pool size only grows when a synctask is created, not when it is moved from wait state to run state, as is the case when an FOP completes. When the tier is paused during migration, synctasks already exist waiting for responses to FOPs to the server with high probability. The fix is to yield() in the RPC callback, which will place the synctask into the wait queue and free up a thread for the FOP callback. A timer wakes the callback after sufficient time has elapsed for the pause to occur. Change-Id: I6a947ee04c6e5649946cb6d8207ba17263a67fc6 BUG: 1267950 Signed-off-by: Dan Lambright <dlambrig@redhat.com> Reviewed-on: http://review.gluster.org/12987 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* tier:unlink during migrationMohammed Rafi KC2015-12-161-0/+3
| | | | | | | | | | | | | | | | | | | | | | files deleted during promotion were not deleting as the files are moving from hashed to non-hashed. On deleting a file that is undergoing promotion, the unlink call is not sent to the dst file as the hashed subvol == cached subvol. This causes the file to reappear once the migration is complete. This patch also fixes a problem with stale linkfile deleting. Change-Id: I4b02a498218c9d8eeaa4556fa4219e91e7fa71e5 BUG: 1282390 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/12829 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Tested-by: Dan Lambright <dlambrig@redhat.com>
* cluster/tier: fix loading tier.so into glusterdN Balachandran2015-12-031-1/+1
| | | | | | | | | | | | | | | | | glusterd occasionally loads shared libraries of translators. This failed for tiering due to a reference to dht_methods which is defined as a global variable which is not necessary. The global variable has been removed and this is now a member of dht_conf and is now initialised in the *_init calls. Change-Id: Ifa0a21e3962b5cd8d9b927ef1d087d3b25312953 BUG: 1287842 Signed-off-by: N Balachandran <nbalacha@redhat.com> Reviewed-on: http://review.gluster.org/12863 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Tested-by: Dan Lambright <dlambrig@redhat.com>
* dht: heal directory path if the directory is not presentMohammed Rafi KC2015-11-081-0/+6
| | | | | | | | | | | | | | | | | | | After a successful nameless lookup if the directory is not present on any of the subvol, then we will get the path of the directory and will recursively send a named lookp on each parent directory. This will help particularly for the scenarios like add brick and attach-tier. Change-Id: I64c2118a5ab03bbaa59b0dfc62babdf4472a92a3 BUG: 1272949 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/12376 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: N Balachandran <nbalacha@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
generated by cgit (git 2.34.1) at 2024-05-01 16:25:29 +0000