summaryrefslogtreecommitdiffstats
path: root/tests
Commit message (Collapse)AuthorAgeFilesLines
* Fixes quota aux mount failureSanoj Unnikrishnan2017-05-0815-19/+71
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The aux mount is created on the first limit/remove_limit/list command and it remains until volume is stopped / deleted / (quota is disabled) , where we do a lazy unmount. If the process is uncleanly terminated, then the mount entry remains and we get (Transport disconnected) error on subsequent attempts to run quota list/limit-usage/remove commands. Second issue, There is also a risk of inadvertent rm -rf on the /var/run/gluster causing data loss for the user. Ideally, /var/run is a temp path for application use and should not cause any data loss to persistent storage. Solution: 1) unmount the aux mount after each use. 2) clean stale mount before mounting, if any. One caveat with doing mount/unmount on each command is that we cannot use same mount point for both list and limit commands. The reason for this is that list command needs mount to be accessible in cli after response from glusterd, So it could be unmounted by a limit command if executed in parallel (had we used same mount point) Hence we use separate mount points for list and limit commands. Change-Id: I4f9e39da2ac2b65941399bffb6440db8a6ba59d0 BUG: 1433906 Signed-off-by: Sanoj Unnikrishnan <sunnikri@redhat.com> Reviewed-on: https://review.gluster.org/16938 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Manikandan Selvaganesh <manikandancs333@gmail.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* Tier: Watermark check for hi and low value being equalhari gowtham2017-05-081-0/+1
| | | | | | | | | | | | | | | | | | | Problem: Both low and hi watermark can be set to same value as the check missed the case for being equal. Fix: Add the check to both the hi and low values being equal along with the low value being higher than hi value. Change-Id: Ia235163aeefdcb2a059e2e58a5cfd8fb7f1a4c64 BUG: 1447960 Signed-off-by: hari gowtham <hgowtham@redhat.com> Reviewed-on: https://review.gluster.org/17175 Smoke: Gluster Build System <jenkins@build.gluster.org> Tested-by: hari gowtham <hari.gowtham005@gmail.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Milind Changire <mchangir@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* gfapi/handleops: Introducing glfs_xreaddirplus_r() fop for handleopsSoumya Koduri2017-05-022-0/+134
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Its known that readdirplus operation fetches stat as well for each of the dirents. But often applications may need extra information, like for eg., NFS-Ganesha which operates on handles needs handles for each of those dirents returned. So this would require extra calls to the backend, in this case LOOKUP (which is very expensive operation) resulting in very low readdir performance. To address that introducing this new API using which applications can make request for any extra information to be returned as part of readdirplus response. Currently this new api returns stat and handles as demanded by application. The synopsis of the API is noted in glfs.h. @todo: * Enhance test script using this new API Below were the perf results on single brick volume with and without these changes - Dataset used - 10*100 directories and each directory containing 100 empty files. I used NFS-Ganesha application to test these changes - >for i in {1..5}; do systemctl restart nfs-ganesha; sleep 10; mount -t nfs -o vers=4 localhost:/brick_vol /mnt; cd /mnt; echo "ITERATION$i"; date; find . > tmp-nfs.log; date; cd /; umount /mnt; sleep 2; done; Without these changes - ITERATION1 Mon Mar 20 17:22:26 IST 2017 Mon Mar 20 17:23:18 IST 2017 ITERATION2 Mon Mar 20 17:23:39 IST 2017 Mon Mar 20 17:24:28 IST 2017 ITERATION3 Mon Mar 20 17:24:49 IST 2017 Mon Mar 20 17:25:36 IST 2017 ITERATION4 Mon Mar 20 17:30:57 IST 2017 Mon Mar 20 17:31:37 IST 2017 ITERATION5 Mon Mar 20 17:31:57 IST 2017 Mon Mar 20 17:32:40 IST 2017 [root@dhcp35-197 /]# On an average ~46.2 sec With these changes applied - ITERATION1 Mon Mar 20 17:35:03 IST 2017 Mon Mar 20 17:35:15 IST 2017 ITERATION2 Mon Mar 20 17:35:36 IST 2017 Mon Mar 20 17:35:46 IST 2017 ITERATION3 Mon Mar 20 17:36:06 IST 2017 Mon Mar 20 17:36:17 IST 2017 ITERATION4 Mon Mar 20 17:41:38 IST 2017 Mon Mar 20 17:41:49 IST 2017 ITERATION5 Mon Mar 20 17:42:10 IST 2017 Mon Mar 20 17:42:20 IST 2017 On an average ~10.8 sec Updates #174 BUG: 1442950 Change-Id: I0f74f74dc62085ca4c4a23c38e3edc84bd850876 Signed-off-by: Soumya Koduri <skoduri@redhat.com> Reviewed-on: https://review.gluster.org/15663 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* Halo Replication feature for AFR translatorKevin Vigor2017-05-023-1/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Summary: Halo Geo-replication is a feature which allows Gluster or NFS clients to write locally to their region (as defined by a latency "halo" or threshold if you like), and have their writes asynchronously propagate from their origin to the rest of the cluster. Clients can also write synchronously to the cluster simply by specifying a halo-latency which is very large (e.g. 10seconds) which will include all bricks. In other words, it allows clients to decide at mount time if they desire synchronous or asynchronous IO into a cluster and the cluster can support both of these modes to any number of clients simultaneously. There are a few new volume options due to this feature: halo-shd-latency: The threshold below which self-heal daemons will consider children (bricks) connected. halo-nfsd-latency: The threshold below which NFS daemons will consider children (bricks) connected. halo-latency: The threshold below which all other clients will consider children (bricks) connected. halo-min-replicas: The minimum number of replicas which are to be enforced regardless of latency specified in the above 3 options. If the number of children falls below this threshold the next best (chosen by latency) shall be swapped in. New FUSE mount options: halo-latency & halo-min-replicas: As descripted above. This feature combined with multi-threaded SHD support (D1271745) results in some pretty cool geo-replication possibilities. Operational Notes: - Global consistency is gaurenteed for synchronous clients, this is provided by the existing entry-locking mechanism. - Asynchronous clients on the other hand and merely consistent to their region. Writes & deletes will be protected via entry-locks as usual preventing concurrent writes into files which are undergoing replication. Read operations on the other hand should never block. - Writes are allowed from _any_ region and propagated from the origin to all other regions. The take away from this is care should be taken to ensure multiple writers do not write the same files resulting in a gfid split-brain which will require resolution via split-brain policies (majority, mtime & size). Recommended method for preventing this is using the nfs-auth feature to define which region for each share has RW permissions, tiers not in the origin region should have RO perms. TODO: - Synchronous clients (including the SHD) should choose clients from their own region as preferred sources for reads. Most of the plumbing is in place for this via the child_latency array. - Better GFID split brain handling & better dent type split brain handling (i.e. create a trash can and move the offending files into it). - Tagging in addition to latency as a means of defining which children you wish to synchronously write to Test Plan: - The usual suspects, clang, gcc w/ address sanitizer & valgrind - Prove tests Reviewers: jackl, dph, cjh, meyering Reviewed By: meyering Subscribers: ethanr Differential Revision: https://phabricator.fb.com/D1272053 Tasks: 4117827 Change-Id: I694a9ab429722da538da171ec528406e77b5e6d1 BUG: 1428061 Signed-off-by: Kevin Vigor <kvigor@fb.com> Reviewed-on: http://review.gluster.org/16099 Reviewed-on: https://review.gluster.org/16177 Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* cluster/dht: Make rebalance throttle option tuned by numberSusant Palai2017-04-291-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current rebalance throttle options: lazy/normal/aggressive may not always be sufficient for the purpose of throttling. In our recent test, we observed for certain setups, normal and aggressive modes behaved similarly consuming full disk bandwidth. So in cases like this admin should be able to tune it down(or vice versa) depending on the need. Along with old throttle configurations, thread counts are tuned based on number. e.g. gluster v set vol-name cluster-rebal.throttle 5. Admin can tune up/down between 0 and the number of cores available. Note: For heterogenous servers, validation will fail on the old server if "number" is given for throttle configuration. The message looks something like this: "volume set: failed: Staging failed on vm2. Error: cluster.rebal-throttle should be {lazy|normal|aggressive}" Test: Manual test by logging active thread number after reconfiguring throttle option. testcase: tests/basic/distribute/throttle-rebal.t Change-Id: I46e3cde546900307831028b344ecf601fd9b02c3 BUG: 1438370 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: https://review.gluster.org/16980 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* libglusterfs: accept random volname in glusterfs_graph_prepare()Niels de Vos2017-04-264-1/+108
| | | | | | | | | | | | | | | | | | When the call to glfs_new("volname") passes a name for the volume and it does not match the name of the subvolume in the graph, glfs_init() will fail. This is easily reproducible by a gfapi program that loads the volume from a .vol file, and not from a GlusterD server. Change-Id: I33e77fbee7d12eaefe7c384fad6aecfa3582ea5a BUG: 1425623 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: https://review.gluster.org/16796 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Prashanth Pai <ppai@redhat.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* debug/sink: add xlator to aid in resource leak debuggingNiels de Vos2017-04-252-0/+37
| | | | | | | | | | | | | | | | | | | | | | This new xlator does not allocate any resources on init(). This makes it a good option to use for debugging xlator releated resources leaks on fini(). By putting the sink xlator as single xlator in a .vol file, and loading it through gfapi, we can investigate the resource leaks that are happening through gfapi (and the Gluster core). By extending the .vol file with additional xlators, it is possible to analyze resource leaks of single xlators. Change-Id: Idb5faa861b623dd5b2a988b181e669b0d52c2a0e BUG: 1425623 Fixes: #176 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: https://review.gluster.org/16806 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* cluster/afr: GFID split brain resolution with favorite-child-policykarthik-us2017-04-201-0/+228
| | | | | | | | | | | | | | | | | | | | | | | | | Problem: Currently the automatic split brain resolution with favorite child policy is not resolving the GFID split brains. Fix: When there is a GFID split brain and the favorite child policy is set to size/mtime/ctime/majority, based on the policy decide on the source and sinks. Delete the entry from the sinks and recreate it from the source. Mark the appropriate pending attributes and resolve the GFID split brain. When the heal takes place it will complete the pending heals and reset the attributes. Change-Id: Ie30e5373f94ca6f276745d9c3ad662b8acca6946 BUG: 1430719 Signed-off-by: karthik-us <ksubrahm@redhat.com> Reviewed-on: https://review.gluster.org/16878 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Ravishankar N <ravishankar@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* Implement negative lookup cachePoornima G2017-04-201-0/+64
| | | | | | | | | | | | | | | | | | | | | Before creating any file negative lookups(1 in Fuse, 4 in SMB etc.) are sent to verify if the file already exists. By serving these lookups from the cache when possible, increases the create performance by multiple folds in SMB access and some percentage in Fuse/NFS access. Feature page: https://review.gluster.org/#/c/16436 Updates #82 Change-Id: Ib1c0e7ac7a386f943d84f6398c27f9a03665b2a4 BUG: 1442569 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: https://review.gluster.org/16952 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* features/bit-rot-stub: bring in optional versioningRaghavendra Bhat2017-04-183-0/+9
| | | | | | | | | | | | | | | | * As of now bit-rot-stub does versioning always. This leads lots of getxattr calls being made in lookups. So make object versioning optional. Change-Id: I83713e45ae59fb28004bb3cfa008f2d69edebbfa BUG: 1359599 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: https://review.gluster.org/14442 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* afr: don't do a post-op on a brick if op failedRavishankar N2017-04-181-0/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | Problem: In afr-v2, self-blaming xattrs are not there by design. But if the FOP failed on a brick due to an error other than ENOTCONN (or even due to ENOTCONN, but we regained connection before postop was wound), we wind the post-op also on the failed brick, leading to setting self-blaming xattrs on that brick. This can lead to undesired results like healing of files in split-brain etc. Fix: If a fop failed on a brick on which pre-op was successful, do not perform post-op on it. This also produces the desired effect of not resetting the dirty xattr on the brick, which is how it should be because if the fop failed on a brick, there is no reason to clear the dirty bit which actually serves as an indication of the failure. Change-Id: I5f1caf4d1b39f36cf8093ccef940118638caa9c4 BUG: 1438255 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: https://review.gluster.org/16976 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* worm: add check for internal processes in ftruncate()Amar Tumballi2017-04-181-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch fixes the recently seen issues with worm_sh.t test. RCA: - $ git log --oneline xlators/features/read-only/src/worm.c 1b01bdc worm: allow Self-heal-Daemon to perform some operations c5a4a77 features/worm: Adding implementation for ftruncate - These two patches were merged in reverse order of their submission, and hence the check added for internal processes got missed in new fop 'ftruncate()'. The worm_sh.t passed the tests as while that patch got submitted there was no ftruncate() in worm xlator. Change-Id: I81a8a45fa2679917a2c859c4f5224a2c3edbc784 BUG: 1423413 Signed-off-by: Amar Tumballi <amarts@redhat.com> Reviewed-on: https://review.gluster.org/17048 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Zhou Zhengping <johnzzpcrystal@gmail.com> Reviewed-by: David Spisla <david.spisla@iternity.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* dht: Add readdir-ahead in rebalance graph if parallel-readdir is onPoornima G2017-04-182-0/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Issue: The value of linkto xattr is generally the name of the dht's next subvol, this requires that the next subvol of dht is not changed for the life time of the volume. But with parallel readdir enabled, the readdir-ahead loaded below dht, is optional. The linkto xattr for first subvol, when: - parallel readdir is enabled : "<volname>-readdir-head-0" - plain distribute volume : "<volname>-client-0" - distribute replicate volume : "<volname>-afr-0" The value of linkto xattr is "<volname>-readdir-head-0" when parallel readdir is enabled, and is "<volname>-client-0" if its disabled. But the dht_lookup takes care of healing if it cannot identify which linkto subvol, the xattr points to. In dht_lookup_cbk, if linkto xattr is found to be "<volname>-client-0" and parallel readdir is enabled, then it cannot understand the value "<volname>-client-0" as it expects "<volname>-readdir-head-0". In that case, dht_lookup_everywhere is issued and then the linkto file is unlinked and recreated with the right linkto xattr. The issue is when parallel readdir is enabled, mount point accesses the file that is currently being migrated. Since rebalance process doesn't have parallel-readdir feature, it expects "<volname>-client-0" where as mount expects "<volname>-readdir-head-0". Thus at some point either the mount or rebalance will fail. Solution: Enable parallel-readdir for rebalance as well and then do not allow enabling/disabling parallel-readdir if rebalance is in progress. Change-Id: I241ab966bdd850e667f7768840540546f5289483 BUG: 1436090 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: https://review.gluster.org/17056 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* cluster/dht: Make rebalance honor min-free-diskSusant Palai2017-04-132-2/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | test: Manual created files of size 1K on 2 brick(of size 1GB) setup . added a brick of size 16GB. set min-free-disk to 12GB(so that first two bricks won't receive any files). removed one of the 1st brick of size 1GB. Logs from test: [2017-04-12 08:52:08.196484] W [MSGID: 0] [dht-rebalance.c:895:__dht_check_free_space] 0-test1-dht: Write will cross min-free-disk for file - /tile32 on subvol - test1-client-1. Looking for new subvol. [2017-04-12 08:52:08.196904] I [MSGID: 0] [dht-rebalance.c:925:__dht_check_free_space] 0-test1-dht: new target found - test1-client-2 for file - /tile32 - Post migration we have two files. The new destination (/brick/1) has the data file [root@vm1 ~]# ll /brick/1/tile32 -rw-r--r--. 2 root root 0 Apr 12 14:22 /brick/1/tile32 - On the old target the linkto file is there with linkto xattr pointing to /brick/1 [root@vm1 ~]# ll /tmp/2/tile32 ---------T. 2 root root 1000 Apr 12 14:22 /tmp/2/tile32 [root@vm1 ~]# getfattr -m . -de text /tmp/2/tile32 getfattr: Removing leading '/' from absolute path names security.selinux="unconfined_u:object_r:user_tmp_t:s0" trusted.gfid="����:Aс�#�/'b2" trusted.glusterfs.dht.linkto="test1-client-2" Marking ./tests/features/worm_sh.t as bad test. Reason being, this patch failed on master branch as well and it has nothing to do with rebalance/remove-brick. BUG: 1441508 Change-Id: I90bae251cda3d957a49cdceda90cd08311a392fb Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: https://review.gluster.org/17034 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* glusterd: Add client details to get-state outputSamikshan Bairagya2017-04-121-16/+17
| | | | | | | | | | | | | | | | | | | | | | | | This commit optionally adds client details corresponding to the locally running bricks to the get-state output. Since getting the client details involves sending RPC requests to the respective local bricks, this is a relatively more costly operation. These client details would be added to the get-state output only if the get-state command is invoked with the 'detail' option. This commit therefore also changes the get-state CLI usage. The modified usage is as follows: # gluster get-state [<daemon>] [[odir </path/to/output/dir/>] \ [file <filename>]] [detail] Change-Id: I42cd4ef160f9e96d55a08a10d32c8ba44e4cd3d8 BUG: 1431183 Signed-off-by: Samikshan Bairagya <samikshan@gmail.com> Reviewed-on: https://review.gluster.org/17003 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* worm: allow Self-heal-Daemon to perform some operationsDavid Spisla2017-04-121-0/+75
| | | | | | | | | | | | | | | | | | The Self-Heal-Daemon should be allowed to trigger unlink, link, trauncate, rename and write operation. The value of frame->root->pid can be used to detect internal (by SHD) operations. Change-Id: I7526148100bef1e2837d69df5c119dc97d91fffd BUG: 1423413 Signed-off-by: David Spisla <david.spisla@iternity.com> Reviewed-on: https://review.gluster.org/16661 Tested-by: jiffin tony Thottan <jthottan@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: jiffin tony Thottan <jthottan@redhat.com> Reviewed-by: Amar Tumballi <amarts@redhat.com>
* tests: remove tests/bugs/core/bug-1421590-brick-mux-reuse-ports.tAtin Mukherjee2017-04-121-60/+0
| | | | | | | | | | | | | | | | | | | | | | | | | bug-1421590-brick-mux-reuse-ports.t seems to be a bad test to me and here is my reasoning: This test tries to check if the ports are reused or not. When a volume is restarted, by the time glusterd tries to allocate a new port to the one of the brick processes of the volume there is no guarantee that the older port will be allocated given the kernel might take some extra time to free up the port between this time frame. From https://build.gluster.org/job/regression-test-burn-in/2932/console we can clearly see that post restart of the volume, glusterd allocated port 49153 & 49155 for brick1 & brick2 respectively but the test was expecting the ports to be matched with 49155 & 49156 which were allocated before the volume was restarted. Change-Id: Id887bf28445261d4de04fc7502e58057659c9512 BUG: 1441035 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: https://review.gluster.org/17033 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Amar Tumballi <amarts@redhat.com>
* geo-rep: filter out xtime attribute during getxattrSaravanakumar Arumugam2017-04-113-13/+11
| | | | | | | | | | | | | | | | | | | | | | georep gsyncd's xtime needs to filtered irrespective of any process access. This way, we can avoid (unnecessarily)syncing xtime attribute to slave, which may raise permission denied errors. test case modified to check for xtime xattr only in backend. Change-Id: I2390b703048d5cc747d91fa2ae884dc55de58669 BUG: 1353952 Signed-off-by: Saravanakumar Arumugam <sarumuga@redhat.com> Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: https://review.gluster.org/14880 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kotresh HR <khiremat@redhat.com> Tested-by: Kotresh HR <khiremat@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* glusterd: Add validation for options rda-cache-limit rda-request-sizePoornima G2017-04-111-0/+30
| | | | | | | | | | | | | | | | | Currently when prarallel readdir is enabled, setting any junk value to rda-cache-limit and rda-request-size succeeds. This is because of bug in the special handling of these options. Fixing the same in this patch Change-Id: I902cd9ac9134c158ab6f8aea4b001254a03547bd BUG: 1439640 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: https://review.gluster.org/17008 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* TIER/TESTS: improving regression test for tierhari gowtham2017-04-107-151/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The test files that were marked as bad test were checked and updated for centos. The tests that had issue were fixed. Tests that aren't needed anymore are removed. REASON: tests/basic/tier/tier-file-create.t This test checks one line after creating a tiered volume (which is done in every tier test). So this line is moved along with other test in tier and the file is deleted. tests/bugs/tier/bug-1286974.t This bug checks for the tier as a task and tier has been moved from a task to service as a part of the tier as a service patch https://review.gluster.org/#/c/13365/ So it is removed from bad tests. tests/basic/tier/record-metadata-heat.t This test had a bug and has been fixed. tests/basic/tier/bug-1214222-directories_missing_after_attach_tier.t tests/basic/tier/fops-during-migration.t tests/basic/tier/tier-snapshot.t tests/basic/tier/tier_lookup_heal.t These test seem to work fine on centos now. Change-Id: I05537f4bbb91584410177ce43543897eff8761a1 BUG: 1421600 Signed-off-by: hari gowtham <hgowtham@redhat.com> Reviewed-on: https://review.gluster.org/16605 Smoke: Gluster Build System <jenkins@build.gluster.org> Tested-by: hari gowtham <hari.gowtham005@gmail.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra Talur <rtalur@redhat.com>
* cli/auth : auth.allow and auth.reject does not accept FQDN/host nameMohit Agrawal2017-04-101-0/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | Problem : At the time of set FQDN name to "auth.allow/auth.reject" through gluster cli,it does not accept FQDN/host name. Solution: Condition needs to be update in verify_host_name and gf_auth to accept FQDN/host name. Fix : Change the condition to accept FQDN/host Name. To verify the patch followed below procedure 1) Try to set FQDN name for auth.allow or auth.reject parameter gluster v set myvol auth.reject <fqdn name> It gives error "fqdn-name" is not a valid internet-address-list 2) After apply the patch it does not give any error. 3) To verify auth.allow/reject try to mount volume on some client. Change-Id: Ieb76cbb93d43323fd29c7ca04efe3790edb4281b BUG: 1321578 Signed-off-by: Mohit Agrawal <moagrawa@redhat.com> Reviewed-on: https://review.gluster.org/15086 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* tests: track EW_RETRIES for debuggingJeff Darcy2017-04-091-0/+4
| | | | | | | | | | | | | | | | | It can often be useful while debugging to know how many times EXPECT_WITHIN had to retry a command before it got the result we were looking for. This patch just adds a variable EW_RETRIES that can be inspected to find this info for the last EXPECT_WITHIN. Change-Id: I1bcb09bb7eb118c3d76c60317ef99e02df6b6ee6 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: https://review.gluster.org/16451 Tested-by: Jeff Darcy <jeff@pl.atyp.us> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd : Disallow peer detach if snapshot bricks exist on itGaurav Yadav2017-03-311-0/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | Problem : - Deploy gluster on 2 nodes, one brick each, one volume replicated - Create a snapshot - Lose one server - Add a replacement peer and new brick with a new IP address - replace-brick the missing brick onto the new server (wait for replication to finish) - peer detach the old server - after doing above steps, glusterd fails to restart. Solution: With the fix detach peer will populate an error : "N2 is part of existing snapshots. Remove those snapshots before proceeding". While doing so we force user to stay with that peer or to delete all snapshots. Change-Id: I3699afb9b2a5f915768b77f885e783bd9b51818c BUG: 1322145 Signed-off-by: Gaurav Yadav <gyadav@redhat.com> Reviewed-on: https://review.gluster.org/16907 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* glusterd: hold off volume deletes while still restarting bricksJeff Darcy2017-03-302-0/+96
| | | | | | | | | | | | | | | | We need to do this because modifying the volume/brick tree while glusterd_restart_bricks is still walking it can lead to segfaults. Without waiting we could accidentally "slip in" while attach_brick has released big_lock between retries and make such a modification. Change-Id: I30ccc4efa8d286aae847250f5d4fb28956a74b03 BUG: 1432542 Signed-off-by: Jeff Darcy <jeff@pl.atyp.us> Reviewed-on: https://review.gluster.org/16927 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* protocol : fix auth-allow regressionAtin Mukherjee2017-03-301-0/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | One of the brick multiplexing patches (commit 1a95fc3) had some changes in gf_auth () & server_setvolume () functions which caused auth-allow feature to be broken. mount doesn't succeed even if it's part of the auth-allow list. This fix does the following: 1. Reintroduce the peer-info data back in gf_auth () so that fnmatch has valid input and it can decide on the result. 2. config-params dict should capture key values pairs for all the bricks in case brick multiplexing is on. In case brick multiplexing isn't enabled, then config-params should carry attributes from protocol/server such that all rpc auth related attributes stay in tact in the dictionary. Change-Id: I007c4c6d78620a896b8858a29459a77de8b52412 BUG: 1433815 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: https://review.gluster.org/16920 Tested-by: Jeff Darcy <jeff@pl.atyp.us> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us> Reviewed-by: MOHIT AGRAWAL <moagrawa@redhat.com>
* cluster/afr: Undo pending xattrs only on the up brickskarthik-us2017-03-271-0/+89
| | | | | | | | | | | | | | | | | | | | | Problem: While doing conservative merge, even if a brick is down, it will reset the pending xattr on that. When that brick comes up, as part of the heal, it will consider this brick as the source and removes the entries on the other bricks, which leads to data loss. Fix: Undo pending only for the bricks which are up. Change-Id: I18436fa0bb1faa5f60531b357dea3f6b20446303 BUG: 1433571 Signed-off-by: karthik-us <ksubrahm@redhat.com> Reviewed-on: https://review.gluster.org/16913 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Ravishankar N <ravishankar@redhat.com>
* rpc: bump up conn->cleanup_gen in rpc_clnt_reconnect_cleanupAtin Mukherjee2017-03-201-0/+14
| | | | | | | | | | | | | | | | | | | | | | | Commit 086436a introduced generation number (cleanup_gen) to ensure that rpc layer doesn't end up cleaning up the connection object if application layer has already destroyed it. Bumping up cleanup_gen was done only in rpc_clnt_connection_cleanup (). However the same is needed in rpc_clnt_reconnect_cleanup () too as with out it if the object gets destroyed through the reconnect event in the application layer, rpc layer will still end up in trying to delete the object resulting into double free and crash. Peer probing an invalid host/IP was the basic test to catch this issue. Change-Id: Id5332f3239cb324cead34eb51cf73d426733bd46 BUG: 1433578 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: https://review.gluster.org/16914 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Milind Changire <mchangir@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us>
* TIER: watermark check during low watermark resethari gowtham2017-03-181-0/+6
| | | | | | | | | | | | | | | | | | | PROBLEM: during a low watermark reset, checking of whether the low watermark is lower than hi watermark is not done. FIX: This patch checks if the hi watermark value is higher the default low watermark. Else throws an failure of the reset command Change-Id: I8b49090c6bccce6d45c2e8076ab766047a2a6162 BUG: 1328342 Signed-off-by: hari gowtham <hgowtham@redhat.com> Reviewed-on: https://review.gluster.org/14028 Smoke: Gluster Build System <jenkins@build.gluster.org> Tested-by: hari gowtham <hari.gowtham005@gmail.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* tests: Fix tests/bugs/distribute/bug-1161311.tShreyas Siravara2017-03-061-2/+8
| | | | | | | | | | | | | | | | | Summary: - Bigger buffer size made rebalance faster and broke the test. - We made the file bigger so rebalance takes longer. BUG: 1428058 Change-Id: I7acfec5611b28bdae0a9d9fc03eb104659a5563a Signed-off-by: Shreyas Siravara <sshreyas@fb.com> Author: Shreyas Siravara <sshreyas@fb.com> Reviewed-on: https://review.gluster.org/16802 Tested-by: Vijay Bellur <vbellur@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* glusterd: disallow increasing replica count for arbiter volumesRavishankar N2017-03-061-0/+6
| | | | | | | | | | | | | | | | | | | | | Problem: add-brick command to increase replica count in an arbiter volume succeeds, causing undesirable effects like the 4th brick being loaded with the arbiter xlator, the 3rd one losing the arbiter xlator (when the brick process is restarted), arbitration logic in afr going for a toss etc. Fix: Arbiter configuration should always be a replica 3 volume (of which 3rd brick is arbiter). Hence disallow increasing replica count for arbiter volume configurations. Change-Id: I9fe4edac880d0f711e6d44324ad5562974e53e51 BUG: 1429200 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: https://review.gluster.org/16845 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* cluster/ec: Introduce optimistic changelog in ECPranith Kumar K2017-03-041-0/+152
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: Fix to https://bugzilla.redhat.com/show_bug.cgi?id=1316873 has made changes to set dirty flag before every update fop, data or metadata, and unset it after successful operation. That makes some of the fops very slow such as entry operations or metadata operations. Solution: File data operations are the only operation which take some time and setting dirty flag before a fop and unsetting it after serves the purpose as probability of failure of a fop is high when the time duration is more. For all the other operations, set dirty flag at the end of the fop, if any brick is down and need heal. Providing following option to choose between high performance or better heal marking for metadata and entry fops. Set/Unset dirty flag for every update fop at the start of the fop. If ON, this option impacts performance of entry operations or metadata operations as it will set dirty flag at the start and unset it at the end of ALL update fop. If OFF and all the bricks are good, dirty flag will be set at the start only for file fops For metadata and entry fops dirty flag will not be set at the start, if all the bricks are good. This does not impact performance for metadata operations and entry operation but has a very small window to miss marking entry as dirty in case it is required to be healed. Thanks to Xavi and Ashish for the design Picked the .t file from Ashish' patch https://review.gluster.org/16298 BUG: 1408809 Change-Id: I3ce860063f0e2901e50754dcfc3e4ed22daf819f Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: https://review.gluster.org/16821 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Xavier Hernandez <xhernandez@datalab.es> Tested-by: Xavier Hernandez <xhernandez@datalab.es> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* storage/posix: Set ret value correctly before exitingKrutika Dhananjay2017-03-011-3/+0
| | | | | | | | | | | Change-Id: I07c3a21c1c0625a517964693351356eead962571 BUG: 1427404 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: https://review.gluster.org/16792 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* tests: Fix and enable split-brain-healing mtime checkNiklas Hambüchen2017-03-011-6/+36
| | | | | | | | | | | | | | | | | | | | | This test was commented out with the belief that it depended on utimensat() support, but in fact it was not necessary because `stat -c %Y` only outputs second resolution. Simply commenting in the test made it fail because it checked the values *before* the heal, while intended was to check them *after* the heal. This commit fixes that. Change-Id: I4194ac645b365a1f906a3ac9bcbbdb1f05000e27 BUG: 1422074 Signed-off-by: Niklas Hambüchen <mail@nh2.me> Reviewed-on: https://review.gluster.org/16789 Reviewed-by: Ravishankar N <ravishankar@redhat.com> Tested-by: Ravishankar N <ravishankar@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niklas Hambüchen
* tests: Mark tests/bitrot/bug-1373520.t bad until fixedKrutika Dhananjay2017-02-281-0/+3
| | | | | | | | | | | | Change-Id: Ic0b5c93c6365e26a5742184dd9445354c0a57295 BUG: 1427404 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: https://review.gluster.org/16780 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* core: Clean up pmap registry up correctly on volume/brick stopSamikshan Bairagya2017-02-271-0/+55
| | | | | | | | | | | | | | | | | | | | | | | This commit changes the following: 1. In glusterfs_handle_terminate, send out individual pmap signout requests to glusterd for every brick. 2. Add another parameter to glusterfs_mgmt_pmap_signout function to pass the brickname that needs to be removed from the pmap registry. 3. Make sure pmap_registry_search doesn't break out from the loop iterating over the list of bricks per port if the first brick entry corresponding to a port is whitespaced out. 4. Make sure the pmap registry entries are removed for other daemons like snapd. Change-Id: I69949874435b02699e5708dab811777ccb297174 BUG: 1421590 Signed-off-by: Samikshan Bairagya <samikshan@gmail.com> Reviewed-on: https://review.gluster.org/16689 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Gaurav Yadav <gyadav@redhat.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* cluster/ec: Don't trigger data/metadata heal on LookupsPranith Kumar K2017-02-265-43/+95
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem-1 If Lookup which doesn't take any locks observes version mismatch it can't be trusted. If we launch a heal based on this information it will lead to self-heals which will affect I/O performance in the cases where Lookup is wrong. Considering self-heal-daemon and operations on the inode from client which take locks can still trigger heal we can choose to not attempt a heal on Lookup. Problem-2: Fixed spurious failure of tests/bitrot/bug-1373520.t For the issues above, what was happening was that ec_heal_inspect() is preventing 'name' heal to happen Problem-3: tests/basic/ec/ec-background-heals.t To be honest I don't know what the problem was, while fixing the 2 problems above, I made some changes to ec_heal_inspect() and ec_need_heal() after which when I tried to recreate the spurious failure it just didn't happen even after a long time. BUG: 1414287 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Change-Id: Ife2535e1d0b267712973673f6d474e288f3c6834 Reviewed-on: https://review.gluster.org/16468 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Xavier Hernandez <xhernandez@datalab.es> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Ashish Pandey <aspandey@redhat.com>
* TESTS/TIER: bug-1303028-Rebalance-glusterd-rpc-connection-issue.thari gowtham2017-02-231-1/+2
| | | | | | | | | | | | | | | | | | | | | | PROBLEM: spurious failure of the test. CAUSE: the function "rebalance_run_time" calculates the total time the tier has been running for. this being a test case, the run time of tier can be 0 and when the function adds up zero it results in zero. and thus it starts to fail. FIX: Give it some time for the function to add up the values. Signed-off-by: hari gowtham <hgowtham@redhat.com> Change-Id: Ie270f3f3c8942081cca85dc49ef8fec76f3a261a BUG: 1425743 Reviewed-on: https://review.gluster.org/16711 Smoke: Gluster Build System <jenkins@build.gluster.org> Tested-by: hari gowtham <hari.gowtham005@gmail.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* tests: Added check for NFS export availability to quota-anon-fd-nfs.tShyam2017-02-221-0/+1
| | | | | | | | | | | Change-Id: I15a9441267c18bb1073d14db325c98fa497f2fb7 BUG: 1425515 Signed-off-by: Shyam <srangana@redhat.com> Reviewed-on: https://review.gluster.org/16701 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: sanoj-unnikrishnan <sunnikri@redhat.com>
* marker: Fix inode value in loc, in setxattr fopPoornima G2017-02-201-0/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | On recieving a rename fop, marker_rename() stores the, oldloc and newloc in its 'local' struct, once the rename is done, the xtime marker(last updated time) is set on the file, but sending a setxattr fop. When upcall receives the setxattr fop, the loc->inode is NULL and it crashes. The loc->inode can be NULL only in one valid case, i.e. in rename case where the inode of new loc can be NULL. Hence, marker should have filled the inode of the new_loc before issuing a setxattr. marker_rename_cbk was already fixed in a previous commit. Fixing marker_rename_done to send valid inode in this commit. Also in upcall check for NULL inode so that there is no crash. Change-Id: I3ed2a05118fed3367dfe3251ce4477310cb480d0 BUG: 1422776 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: https://review.gluster.org/16633 Reviewed-by: Kotresh HR <khiremat@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: soumya k <skoduri@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* glusterd: take conn->lock around operations on conn->reconnectJeff Darcy2017-02-181-0/+25
| | | | | | | | | | | | | | | | Failure to do this could lead to a race in which a timer would be removed twice concurrently, corrupting the timer list (because gf_timer_call_cancel has no internal protection against this) and possibly causing a crash. Change-Id: Ic1a8b612d436daec88fd6cee935db0ae81a47d5c BUG: 1421721 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: https://review.gluster.org/16662 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* tests: reenable trash.tJeff Darcy2017-02-101-3/+0
| | | | | | | | | | | | | | | Now that the underlying bug has been fixed (by d97e63d0) we can allow the test to run again. Change-Id: If9736d142f414bf9af5481659c2b2673ec797a4b BUG: 1420434 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: https://review.gluster.org/16584 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Anoop C S <anoopcs@redhat.com> Reviewed-by: jiffin tony Thottan <jthottan@redhat.com>
* glusterd: keep snapshot bricks separate from regular onesJeff Darcy2017-02-102-13/+24
| | | | | | | | | | | | | | | | | | | | | | | The problem here is that a volume's transport options can change, but any snapshots' bricks don't follow along even though they're now incompatible (with respect to multiplexing). This was causing the USS+SSL test to fail. By keeping the snapshot bricks separate (though still potentially multiplexed with other snapshot bricks including those for other volumes) we can ensure that they remain unaffected by changes to their parent volumes. Also fixed various issues with how the test waits (or more precisely didn't) for various events to complete before it continues. Change-Id: Iab4a8a44fac5760373fac36956a3bcc27cf969da BUG: 1385758 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: https://review.gluster.org/16544 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Avra Sengupta <asengupt@redhat.com> Tested-by: Avra Sengupta <asengupt@redhat.com>
* afr: all children of AFR must be up to resolve s-brainRavishankar N2017-02-091-0/+66
| | | | | | | | | | | | | | | | | | | | | | | | Problem: The various split-brain resolution policies (favorite-child-policy based, CLI based and mount (get/setfattr) based) attempt to resolve split-brain even when not all bricks of replica are up. This can be a problem when say in a replica 3, the only good copy is down and the other 2 bricks are up and blame each other (i.e. split-brain). We end up healing the file in such a case and allow I/O on it. Fix: A decision on whether the file is in split-brain or not must be taken only if we are able to examine the afr xattrs of *all* bricks of a given replica. Change-Id: Icddb1268b380005799990f5379ef957d84639ef9 BUG: 1417522 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: https://review.gluster.org/16476 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* glusterd: ignore return code of glusterd_restart_bricksAtin Mukherjee2017-02-091-0/+40
| | | | | | | | | | | | | | | | | | | | | When GlusterD is restarted on a multi node cluster, while syncing the global options from other GlusterD, it checks for quorum and based on which it decides whether to stop/start a brick. However we handle the return code of this function in which case if we don't want to start any bricks the ret will be non zero and we will end up failing the import which is incorrect. Fix is just to ignore the ret code of glusterd_restart_bricks () Change-Id: I37766b0bba138d2e61d3c6034bd00e93ba43e553 BUG: 1420637 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: https://review.gluster.org/16574 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Samikshan Bairagya <samikshan@gmail.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* trash: fix problem with trash feature under multiplexingJeff Darcy2017-02-091-1/+3
| | | | | | | | | | | | | | | | | | With multiplexing, the trash translator gets a reconfigure call before a notify(CHILD_UP). In this case, priv->trash_itable was not yet initialized, so the reconfigure would get a SEGV. Moving the itable allocation to init seems to fix it, so trash can be reenabled. Change-Id: I21ac2d7fc66bac1bc4ec70fbc8bae306d73ac565 BUG: 1420434 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: https://review.gluster.org/16567 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Anoop C S <anoopcs@redhat.com> Reviewed-by: jiffin tony Thottan <jthottan@redhat.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* tests: fix online_brick_count for multiplexingJeff Darcy2017-02-073-8/+24
| | | | | | | | | | | | | | | | | | The number of brick processes no longer matches the number of bricks, therefore counting processes doesn't work. Counting *pidfiles* does. Ironically, the fix broke multiplex.t which used this function, so it now uses a different function with the old process-counting behavior. Also had to fix online_brick_count and kill_node in cluster.rc to be consistent with the new reality. Change-Id: I4e81a6633b93227e10604f53e18a0b802c75cbcc BUG: 1385758 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: https://review.gluster.org/16527 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* tests : turn off nfs.disable in bug-1238706-daemons-stop-on-peer-cleanup.tAtin Mukherjee2017-02-071-0/+2
| | | | | | | | | | | | | | To validate this test and remove it from the list of bad tests, turn off nfs.disable option so that nfs daemon can come up. Change-Id: I8146c2d7f72ac53cac7e395dbb9e819d729eb6a9 BUG: 1257792 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: https://review.gluster.org/16514 CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* CLI/TIER: removing old tier commands under rebalancehari gowtham2017-02-071-1/+16
| | | | | | | | | | | | | | | | | | | | PROBLEM: gluster v rebalance <volname> tier start works even after the switch of tier to service framework. This lets the user have two tierd for the same volume. FIX: checking for each process will make the new code hard to maintain. So we are removing the support for old commands. Change-Id: I5b0974b2dbb74f0bee8344b61c7f924300ad73f2 BUG: 1415590 Signed-off-by: hari gowtham <hgowtham@redhat.com> Reviewed-on: https://review.gluster.org/16463 Smoke: Gluster Build System <jenkins@build.gluster.org> Tested-by: hari gowtham <hari.gowtham005@gmail.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: N Balachandran <nbalacha@redhat.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* extras: Provide group set for md-cache and invalidation optionsPoornima G2017-02-031-0/+20
| | | | | | | | | | | | | | | | | | To enable the integration of md-cache and invalidation features we need to perform 3 volume set options in a specific order. In order to ease this for user provide a group volume set option. Usage: gluster vol set <VOLNAME> group metadata-cache Change-Id: I9bf0fd4217aa2a1c7ffbdc93e879b10f87addeac BUG: 1418249 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: https://review.gluster.org/16503 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd: double-check brick liveness for remove-brick validationJeff Darcy2017-02-021-2/+4
| | | | | | | | | | | | | | | | Same problem as https://review.gluster.org/#/c/16509/ in a different place. Tests detach bricks without glusterd's knowledge, so glusterd's internal brick state is out of date and we have to re-check (via the brick's pidfile) as well. BUG: 1385758 Change-Id: I169538c1c62d72a685a49d57ef65fb6c3db6eab2 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: https://review.gluster.org/16529 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
generated by cgit (git 2.34.1) at 2024-05-05 05:25:43 +0000