summaryrefslogtreecommitdiffstats
path: root/tests
Commit message (Collapse)AuthorAgeFilesLines
* features/uss: Perform NULL check on @name in svc_getxattrKrutika Dhananjay2015-01-081-0/+24
| | | | | | | | | | | | | | | | | | Backport of: http://review.gluster.org/9378 LISTXATTR fop is internally converted into a GETXATTR with the "name" parameter set to NULL. In svc_getxattr(), a listxattr was causing a crash because of a NULL pointer dereference on @name. FIX: Add the necessary NULL check. Change-Id: Ifb4ca2a45ecc78c384e92822403eaf2f1b573798 BUG: 1180070 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/9417 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com>
* features/snapview-client: handle readdir requests differently for samba.Raghavendra Bhat2015-01-081-0/+96
| | | | | | | | | | | | | * For samba export, the entry point is also added to the readdir response. Change-Id: I825c017e0f16db1f1890bb56e086f36e6558a1c2 BUG: 1175742 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/9218 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com> Signed-off-by: Sachin Pandit <spandit@redhat.com> Reviewed-on: http://review.gluster.org/9344
* uss/gluster: Send success on parent lookup of entry-point.vmallika2015-01-081-0/+56
| | | | | | | | | | | | | | | | | | | | When a lookup sent to snapview-server for entry-point directory protocol server first tries to resolve gfid of a parent directory. looking up the parent gfid from a latest snapshot can fail if the volume is a restored volume. As this gfid is already looked-up by snapview-client, we can return success for the parent gfid. Change-Id: Ic9b20561ef79b93032f07c3a81eae54a94e1747b BUG: 1175744 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/9229 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com> Signed-off-by: Sachin Pandit <spandit@redhat.com> Reviewed-on: http://review.gluster.org/9342
* USS : fill proper uid and gid during a access call from nfs.Sachin Pandit2015-01-081-0/+201
| | | | | | | | | | | | | | | | | | | | | | | Problem : when an user tries to access a file/folder for which he does not have a proper permission required then fuse gives out a proper error "Permission denied", but nfs does not give out that error, rather he can access the file/folder. The reason being uid and gid of call frame stack takes a default value of uid and gid which point to root permission. Solution : Set a proper uid and gid during a access call from nfs Change-Id: Ib060706fde66ec7e60f242fab1f3e59122ed2245 BUG: 1175739 Signed-off-by: Sachin Pandit <spandit@redhat.com> Reviewed-on: http://review.gluster.org/9194 Reviewed-by: Vijaikumar Mallikarjuna <vmallika@redhat.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com> Signed-off-by: Sachin Pandit <spandit@redhat.com> Reviewed-on: http://review.gluster.org/9340 Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com>
* glusterd/uss: if snapd is not running, return success from ↵Atin Mukherjee2015-01-081-0/+30
| | | | | | | | | | | | | | | | | | | | | glusterd_handle_snapd_option. glusterd_handle_snapd_option was returning failure if snapd is not running because of which gluster commands were failing. Change-Id: I22286f4ecf28b57dfb6fb8ceb52ca8bdc66aec5d BUG: 1175765 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/9206 Reviewed-by: Kaushal M <kaushal@redhat.com> Reviewed-by: Avra Sengupta <asengupt@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijaikumar Mallikarjuna <vmallika@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com> Signed-off-by: Sachin Pandit <spandit@redhat.com> Reviewed-on: http://review.gluster.org/9311 Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com>
* afr : glfs-heal implementationAnuradha2015-01-063-46/+186
| | | | | | | | | | | | | Backport of http://review.gluster.org/6529 and http://review.gluster.org/9119 Change-Id: Ie420efcb399b5119c61f448b421979c228b27b15 BUG: 1173528 Signed-off-by: Anuradha <atalur@redhat.com> Reviewed-on: http://review.gluster.org/9335 Reviewed-by: Ravishankar N <ravishankar@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com>
* gNFS: Allow reading ACLs even without read permissions on the file.Meghana Madhusudhan2015-01-021-0/+36
| | | | | | | | | | | | | | | | | | | | When root-squash is enabled or when no permissions are given to a file, NFS threw permission errors. According to the kernel-nfs behaviour, no permissions are required to read ACLs. When no ACLs are set, the system call sys_lgetxattr fails and returns a ENODATA error. This translates to ESERVERFAULT error in NFS. Fuse makes an exception to this error and returns a success case. Similar changes are made here to achieve the expected behaviour. Change-Id: I46b8f5911114eb087a3f8ca4e921b6b41e83f3b3 BUG: 1177899 Signed-off-by: Meghana Madhusudhan <mmadhusu@redhat.com> Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9085 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-on: http://review.gluster.org/9369 Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com>
* gluster/uss: Don't send failure when accessing snap with name same as ↵vmallika2014-12-242-0/+40
| | | | | | | | | | | | | | | | | | | | | entry-point name. In a scenario, if the snap name is same as the snap-directory than cd to snaps/snaps fails. Send a lookup to snap-view server instead of failing Change-Id: Ie7b811815ff30961500592bbc8cdb514a9d76ef5 BUG: 1175733 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/9135 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Avra Sengupta <asengupt@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com> Signed-off-by: Sachin Pandit <spandit@redhat.com> Reviewed-on: http://review.gluster.org/9306 Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com>
* uss/snapd: Handle readlink fops on snap view serverAvra Sengupta2014-12-241-0/+38
| | | | | | | | | | | | | | | | Handle readlink fops in case of symlinks on snap view server BUG: 1175756 Change-Id: Ia08e9e9c1c61e06132732aa580c5a9fd5e7c449b Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/9102 Reviewed-by: Vijaikumar Mallikarjuna <vmallika@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com> Signed-off-by: Sachin Pandit <spandit@redhat.com> Reviewed-on: http://review.gluster.org/9305 Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com>
* mgmt/glusterd: Validate the options of ussvmallika2014-12-241-0/+8
| | | | | | | | | | | | | | Change-Id: Id13dc4cd3f5246446a9dfeabc9caa52f91477524 BUG: 1175755 Signed-off-by: Varun Shastry <vshastry@redhat.com> Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/8133 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com> Signed-off-by: Sachin Pandit <spandit@redhat.com> Reviewed-on: http://review.gluster.org/9304 Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com>
* uss/gluster: creating file/directories inside .snaps should fail with EROFS.vmallika2014-12-221-8/+14
| | | | | | | | | | | | | | | | When an attempt is made to create file/directories inside .snaps, it fails with wrong error message as "Stale file handle". It should fail with "Read-only file system" Change-Id: I3a812a0afc4762cbb71ab180b9394c866e576a66 BUG: 1175730 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/9039 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com> Signed-off-by: Sachin Pandit <spandit@redhat.com> Reviewed-on: http://review.gluster.org/9300 Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com>
* USS : Display only the activated snapshots.Sachin Pandit2014-12-183-1/+52
| | | | | | | | | | | | | | | | | | | Instead of displaying all the snapshots in the uss world, it is better if we display only the activated snapshots. Change-Id: I70d3ec212b62ec15956ae3e826bc4201d8dedd17 BUG: 1170548 Signed-off-by: Sachin Pandit <spandit@redhat.com> Reviewed-on: http://review.gluster.org/8958 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Avra Sengupta <asengupt@redhat.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com> Signed-off-by: Sachin Pandit <spandit@redhat.com> Reviewed-on: http://review.gluster.org/9242 Reviewed-by: Vijaikumar Mallikarjuna <vmallika@redhat.com> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com>
* glusterd/snapshot: Snapshot should be deactivated when it is created.vmallika2014-12-186-2/+42
| | | | | | | | | | | | | | | | | | | | By default snapshot should be deactivated and this should be a configurable option. This behaviour can be configured by the command below: gluster snapshot config activate-on-create <enable|disable> Change-Id: I1911595c32beed43bb2fca4bf99f0d264b422513 BUG: 1170921 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/8985 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Avra Sengupta <asengupt@redhat.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Kaushal M <kaushal@redhat.com> Signed-off-by: Sachin Pandit <spandit@redhat.com> Reviewed-on: http://review.gluster.org/9241 Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com>
* ec: Remove O_APPEND from flags on create and open.Xavier Hernandez2014-12-181-0/+43
| | | | | | | | | | | | | | | | | | | | | | Allowing O_APPEND flag to pass through to the brick files corrupts fragment contents because writes are not stored on the desired place. Write fop has been modified so that it uses current file size as its write offset. This guarantees that all writes, even those comming from different file descriptors and clients, will write to the end of the file. This is backport of http://review.gluster.org/9079/ Change-Id: I9f721f12217a98231fe52e344166d1c94172c272 BUG: 1161885 Signed-off-by: Xavier Hernandez <xhernandez@datalab.es> Reviewed-on: http://review.gluster.org/9080 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> Tested-by: Raghavendra Bhat <raghavendra@redhat.com>
* tests: spurious failures fix for quota-anon-fd-nfs.tAtin Mukherjee2014-12-104-2/+59
| | | | | | | | | | | | Change-Id: I4f7ee68c514d8d322e25cf74167f288a8b6f8164 BUG: 1165938 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/9108 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9148 Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> Tested-by: Raghavendra Bhat <raghavendra@redhat.com>
* tests: regression test portability - quota-anon-fd-nfs.tEmmanuel Dreyfus2014-12-092-12/+36
| | | | | | | | | | | | | | | | | | | | | | | | | Fix portability problems in quota-anon-fd-nfs.t - Use mount_nfs wrapper and include nfs.rc to get it defined. - umount NFS before cleanup to avvoid deadlocks. - umount -l is Linux-specific, use umount -f on BSD. - wait for 1s for portmap registration before mouting NFS. - mount from $H0 instead of localhost: the later fails on NetBSD. - Test quota without filling GB of data, 20MB is enough and it will be gentle with smaller setups. - wait for write behind to complete before testing quota overflow BUG: 1165938 Change-Id: I097d5faed2fa7b6438aaa56def85172f23bbe7dc Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/8969 Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Kiran Patil <kiran@fractalio.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com> Reviewed-on: http://review.gluster.org/8997 Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> Tested-by: Raghavendra Bhat <raghavendra@redhat.com>
* protocol/server: No root-squash checks for self-heal pidPranith Kumar K2014-12-091-0/+26
| | | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/9231 Problem: Self-heal pid used to be -1 which was colliding with gsyncd. Gsyncd was not checked for root-squash authentication. Recently self-heal pid changed to -6, but root-squash authentication is not disabled for this. Fix: disable root-squash authentication for self-heal Change-Id: I594a732d800902ce805f849813631da36d8d3dc7 BUG: 1170514 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/9234 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> Tested-by: Raghavendra Bhat <raghavendra@redhat.com>
* tests: spurious failure fix in mgmt_v3_locks.tAtin Mukherjee2014-11-291-5/+4
| | | | | | | | | | | | Change-Id: I7c4599648b5d47d93a447e58c063fab21e8f9ef7 BUG: 1165938 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/9114 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com> Tested-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/9149 Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com>
* features/marker: Filter internal xattrs in lookupPranith Kumar K2014-11-161-0/+138
| | | | | | | | | | | | | | Backport of http://review.gluster.org/9061 Afr should ignore quota-size-key as part of self-heal but should heal quota-limit key. BUG: 1163569 Change-Id: I93d203002eac4fe20b70730c27c852d783c16d7f Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/9110 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glupy: portability fixesEmmanuel Dreyfus2014-11-162-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes portability problems so that NetBSD passes tests/features/glupy.t - Use python-config to detect python build environment on all systems, not just Linux and Darwin. - Get the site-package directory from python and make sure we install glupy.py there, Previously we installed within glusterfs prefix, which caused a problem if it was different that python's prefix. - Set PYTHONPATH for tests so that the detected site-packages is used in python's search path. This should be useless, but let us have it just in case. - Pass glupy.so path from glusterfsd to glupy.py through an environment variable and use it in CDLL instead of "", as the later seems not portable (at least it fails on NetBSD). - Use gil_init_key pthread_getspecific to avoid deadlocks (that code was #ifdef out, perhaps because it was not needed on Linux, but it seems to be required for NetBSD. - Recover the error message from Python and send it to the logs to help debugging problems. Backport of: http://review.gluster.org/8978 This is the same patchset as previously submitted to retrigger regression tests after a spurious failure. BUG: 1138897 Change-Id: I1e23ba5cc18f129ee1032f905cb053953b683a81 Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/8980 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Use C-locale for numeric/string conversion routinesNiels de Vos2014-11-161-0/+24
| | | | | | | | | | | | | | | | | | | | | (strtod, ...) or config file parsing might fail. Cherry picked from commit 5b8de971a4b81bc2bd6de0ffc6386587226295c6: > Change-Id: I649f29bbf87222399a0c2d1ed5a3bf136c613b9b > BUG: 1117951 > Signed-off-by: Anders Blomdell <anders.blomdell@control.lth.se> > Reviewed-on: http://review.gluster.org/8299 > Tested-by: Gluster Build System <jenkins@build.gluster.com> > Reviewed-by: Prashanth Pai <ppai@redhat.com> > Reviewed-by: Vijay Bellur <vbellur@redhat.com> Change-Id: I649f29bbf87222399a0c2d1ed5a3bf136c613b9b BUG: 1157107 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9132 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* ec: Correctly handle quota xattrsXavier Hernandez2014-11-151-0/+58
| | | | | | | | | | | This is a backport of http://review.gluster.org/8990/ Change-Id: I35e11d83c318210d44b918e847cf13db35b01510 BUG: 1158088 Signed-off-by: Xavier Hernandez <xhernandez@datalab.es> Reviewed-on: http://review.gluster.org/8992 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com>
* features/snapview-server: check if the reference to the snapshot world is ↵Raghavendra Bhat2014-10-301-0/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | correct before doing any fop The following operations might lead to problems: * Create a file on the glusterfs mount point * Create a snapshot (say "snap1") * Access the contents of the snapshot * Delete the file from the mount point * Delete the snapshot "snap1" * Create a new snapshot "snap1" Now accessing the new snapshot "snap1" gives problems. Because the inode and dentry created for snap1 would not be deleted upon the deletion of the snapshot (as deletion of snapshot is a gluster cli operation, not a fop). So next time upon creation of a new snap with same name, the previous inode and dentry itself will be used. But the inode context contains old information about the glfs_t instance and the handle in the gfapi world. Directly accessing them without proper check leads to ENOTCONN errors. Thus the glfs_t instance should be checked before accessing. If its wrong, then right instance should be obtained by doing the lookup. Change-Id: I975245b8f6b7fea0a90eb5e36e8149d12457ac10 BUG: 1158791 Reviewed-on: http://review.gluster.org/9007 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* socket: disallow CBC cipher modesJeff Darcy2014-10-291-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | This is related to CVE-2014-3566 a.k.a. POODLE. http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2014-3566 POODLE is specific to CBC cipher modes in SSLv3. Because there is no way to prevent SSLv3 fallback on a system with an unpatched version of OpenSSL, users of such systems can only be protected by disallowing CBC modes. The default cipher-mode specification in our code has been changed accordingly. Users can still set their own cipher modes if they wish. To support them, the ssl-authz.t test script provides an example of how to combine the CBC exclusion with other criteria in a script. Change-Id: Ib1fa547082fbb7de9df94ffd182b1800d6e354e5 BUG: 1157659 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/8962 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com> Reviewed-on: http://review.gluster.org/8987 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Niels de Vos <ndevos@redhat.com>
* ec: Fix rebalance issuesXavier Hernandez2014-10-273-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some issues in ec xlator made that rebalance didn't complete successfully and generated some warnings and errors in the log. The most critical error was a race condition that caused false corruption detection when two specific operations were executed sequentially and they shared the same lock. This explains the problem: 1. A setxattr is issued. 2. setxattr: ec locks the inode before updating the xattr. 3. setxattr: The xattr is updated. 4. setxattr: Upper xlator is notified that the operation completed. 5. setxattr: A background task is initiated to update the version of the file. 6. A stat is issued on the same file. 7. stat: Since the lock is already acquired, it's reused. 8. stat: A lookup is issued to determine version and size information of the file. At this point, operations 5 and 8 can interfere. This can make that lookup sees different information on each brick, determining that some bricks are corrupted and incorrectly excluding them from the operation and initiating a self-heal. In some cases this false detection combined with self-heal could lead to invalid updates of the trusted.ec.size xattr, leaving the file smaller than it should be. This only happens if the first operation does not perform a lookup, because chained operations reuse the information returned by the previous one, avoiding this kind of problems. To solve this, now the background update is executed atomically with the posterior unlock. This avoids some reuses of the lock while updating. However this reduces performance because the window in which new requests can reuse the lock is much smaller now. This has been alleviated by using the same technique implemented in AFR (i.e. waiting some time before releasing the lock). Some minor changes also introduced in this patch: * Bug in management of 'trusted.glusterfs.pathinfo' that was writing beyond the allocated space. * Uninitialized variable. * trusted.ec.config was not created for regular files created with mknod. * An invalid state was used in access fop. This is a backport of http://review.gluster.org/8947/ Change-Id: Idfaf69578ed04dbac97a62710326729715b9b395 BUG: 1152903 Signed-off-by: Xavier Hernandez <xhernandez@datalab.es> Reviewed-on: http://review.gluster.org/8948 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com>
* ec: Fix self-heal issuesXavier Hernandez2014-10-222-47/+169
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: Doing an 'ls' of a directory that has been modified while one of the bricks was down, sometimes returns the old directory contents. Cause: Directories are not marked when they are modified as files are. The ec xlator balances requests amongst available and healthy bricks. Since there is no way to detect that a directory is out of date in one of the bricks, it is used from time to time to return the directory contents. Solution: Basically the solution consists in use versioning information also for directories, however some additional changes have been necessary. Changes: * Use directory versioning: This required to lock full directory instead of a single entry for all requests that add or remove entries from it. This is needed to allow atomic version update. This affects the following fops: create, mkdir, mknod, link, symlink, rename, unlink, rmdir Another side effect is that opendir requires to do a previous lookup to get versioning information and discard out of date bricks for subsequent readdir(p) calls. * Restrict directory self-heal: Till now, when one discrepancy was found in lookup, a self-heal was automatically started. This caused the versioning information of a bad directory to be healed instantly, making the original problem to reapear again. To solve this, when a missing directory is detected in one or more bricks on lookup or opendir fops, only a partial self-heal is performed on it. A partial self-heal basically creates the directory but does not restore any additional information. This avoids that an 'ls' could repair the directory and cause the problem to happen again. With this change, output of 'ls' is always consistent. However, since the directory has been created in the brick, this allows any other operation on it (create new files, for example) to succeed on all bricks and not add additional work to the self-heal process. To force a self-heal of a directory, any other operation must be done on it. For example a getxattr. With these changes, the correct healing procedure that would avoid inconsistent directory browsing consists on a post-order traversal of directoriesi being healed. This way, the directory contents will be healed before healing the directory itslef. * Additional changes to fix self-heal errors - Don't use fop->fd to decide between fd/loc. open, opendir and create have an fd, but the correct data is in loc. - Fix incorrect management of bad bricks per inode/fd. - Fix incorrect selection of fop's target bricks when there are bad bricks involved. - Improved ec_loc_parent() to always return a parent loc as complete as possible. This is a backport of http://review.gluster.org/8916/ Change-Id: Iaf3df174d7857da57d4a87b4a8740a7048b366ad BUG: 1149727 Signed-off-by: Xavier Hernandez <xhernandez@datalab.es> Reviewed-on: http://review.gluster.org/8946 Reviewed-by: Dan Lambright <dlambrig@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* test/ec: Fix spurious failures caused by self-healXavier Hernandez2014-10-2112-41/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | The sha1sum of a file may update the access time of that file. If this happens while a brick is down, as it is forced in the test, that brick doesn't get the update, getting out of sync. When the brick is restarted, self-heal repairs the file, but the test shouldn't access brick contents until self-heal finishes. If this is combined with a kill of another brick before self-heal has finished repairing the file, the volume could become inaccessible. Since the purpose of these tests is only to check ec functionality (there is another test that checks self-heal), the test that corrupts the file has been removed. Additional checks to validate the state of the volume have been added to avoid some timing issues. This is a backport of http://review.gluster.org/8892/ BUG: 1149118 Change-Id: I8a40b7f07fc8ecd2c721bad1bcdd351dd8504155 Signed-off-by: Xavier Hernandez <xhernandez@datalab.es> Reviewed-on: http://review.gluster.org/8902 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com>
* ec: Fix incorrect management of healed bricksXavier Hernandez2014-10-201-32/+31
| | | | | | | | | | | | | | | | | | | | The final lookup made to restore final file attributes after a self-heal did clear the mask of bad bricks, causing that the final setattr won't modify any brick at all. This caused that some attriutes, specially the modification time of the file didn't get updated properly. Now the mask of healed bricks is saved before doing the last lookup. It's also used to correctly report the repaired bricks. This is a backport of http://review.gluster.org/8905/ Change-Id: Ib94083c9e1b562515dfb54f9574120f1f031dccc BUG: 1149725 Signed-off-by: Xavier Hernandez <xhernandez@datalab.es> Reviewed-on: http://review.gluster.org/8906 Reviewed-by: Dan Lambright <dlambrig@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* ec: Add state dump supportXavier Hernandez2014-10-042-0/+50
| | | | | | | | | | | | This is a backport of http://review.gluster.org/8891/ Change-Id: I4504f3050674dde217e79af28cb4d2b5370fe2d5 BUG: 1148093 Signed-off-by: Xavier Hernandez <xhernandez@datalab.es> Reviewed-on: http://review.gluster.org/8899 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd/quota: Heal pgfid xattr on existing data when the quota is enablevmallika2014-09-301-0/+34
| | | | | | | | | | | | | | | | | | | | | This is a backport of http://review.gluster.org/#/c/8878/ The pgfid extended attributes are used to construct the ancestry path (from the file to the volume root) for nameless lookups on files. As NFS relies on nameless lookups heavily, quota enforcement through NFS would be inconsistent if quota were to be enabled on a volume with existing data. Solution is to heal the pgfid extended attributes as a part of lookup perfomed by quota-crawl process. In a posix lookup check for pgfid xattr and if it is missing set the xattr. BUG: 1147953 Change-Id: I707d91a056e07452bfd1e070af5eddaa752a84ac Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/8890 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Use sane OS-dependent defaults for SSL configurationEmmanuel Dreyfus2014-09-261-2/+8
| | | | | | | | | | | | | | Current code assumes /etc/ssl exists, which may not be the case. Attempt to guess sane default for a few OS. Backport of I0f3168f79b8f4275636581041740dfcaf25f3edd BUG: 1138897 Change-Id: I972c26236cbf070f15c3846add059bd33d60216d Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/8861 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: Authenticate management handshake requestsKaushal M2014-09-242-4/+58
| | | | | | | | | | | | | | | | | | | | | | Backport of 371bb42 glusterd: Authenticate management handshake requests from master. Management handshake requests, which are used to validate op-version supported by the peers, are now only allowed if, - the glusterd doesn't have any other peer, or - the request was sent by another peer. This prevents the op-version of a peer being changed because of a connection attempt by an invalid peer. BUG: 1144978 Change-Id: I5a909dad37e9873efe8b75dad41b7af71ce91c3d Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/8819 Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* test : Fix for spurious failureSachin Pandit2014-09-232-6/+8
| | | | | | | | | | | | | | | | | Problem : Once the features.uss is enabled it does not wait for the process to be created. And if we try to check for the pid of the snapd then it will not be present which causes a failure. Solution : Adding a EXPECT_WITHIN which waits to get the pid until certain time period. Change-Id: I5fdda9beecf867b7544f2e4b830f698ddf6e3bec BUG: 1145189 Signed-off-by: Sachin Pandit <spandit@redhat.com> Reviewed-on: http://review.gluster.org/8809 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* feature/snapshot : Interface to delete all snapshots belonging to a system ↵Sachin Pandit2014-09-233-48/+128
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | as-well-as to a particular volume Problem : With the current design we can only delete a single snapshot. And the deletion of volume which contains snapshot is not allowed. Because of that user might be forced to delete all the snapshots manually before he is allowed to delete a volume. Solution: Following is the interface with which user can delete all the snapshots of a system or belonging to a particular volume. Syntax : gluster snapshot delete all *To delete all the snapshots present in a system Syntax : gluster snapshot delete volume <volname> *To deletes all the snapshot present in a volume specified. ======================================================================== Sample Output: Case 1 : Deleting a single snapshot. [root@snapshot-24 glusterfs]# gluster snapshot delete snap1 Deleting snap will erase all the information about the snap. Do you still want to continue? (y/n) y snapshot delete: snap1: snap removed successfully ----------------------------------------------------------------- Case 2 : Deleting all the snapshots in a Volume. [root@snapshot-24 glusterfs]# gluster snapshot delete volume vol1 Volume (vol1) contains 9 snapshot(s). Do you still want to continue and delete them? (y/n) y snapshot delete: snap2: snap removed successfully snapshot delete: snap3: snap removed successfully snapshot delete: snap4: snap removed successfully snapshot delete: snap5: snap removed successfully . . . ----------------------------------------------------------------- Case 3 : Deleting all the snapshots in a system. [root@snapshot-24 glusterfs]# gluster snapshot delete all System contains 4 snapshot(s). Do you still want to continue and delete them? (y/n) y snapshot delete: snap7: snap removed successfully snapshot delete: snap8: snap removed successfully snapshot delete: snap9: snap removed successfully snapshot delete: snap10: snap removed successfully ======================================================================== Change-Id: Ifec8e128ab2011cbbba208376b9c92cfbe7d8d71 BUG: 1145083 Signed-off-by: Sachin Pandit <spandit@redhat.com> Reviewed-on: http://review.gluster.org/8162 Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Avra Sengupta <asengupt@redhat.com> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-by: Kaushal M <kaushal@redhat.com> Signed-off-by: Sachin Pandit <spandit@redhat.com> Reviewed-on: http://review.gluster.org/8798 Reviewed-by: Vijaikumar Mallikarjuna <vmallika@redhat.com>
* cli/snapshot : gluster volume info should not show the options which are not ↵Sachin Pandit2014-09-232-2/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | set explicitly. Problem : Even though snap-max-hard-limit, snap-max-soft-limit and auto-delete values were not set explicitly, It was getting showed in the output of gluster volume info. Solution : Check if the value is already present in dictionary (That means, it is set), If value is not present then consider the default value, NOTE : This patch doesn't solve the problem where the values which is set globally are being displayed in gluster volume info Change-Id: I61445b3d2a12eb68c38a19bea53b9051ad028050 BUG: 1145020 Signed-off-by: Sachin Pandit <spandit@redhat.com> Reviewed-on: http://review.gluster.org/8191 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Avra Sengupta <asengupt@redhat.com> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-by: Kaushal M <kaushal@redhat.com> Signed-off-by: Sachin Pandit <spandit@redhat.com> Reviewed-on: http://review.gluster.org/8793 Reviewed-by: Vijaikumar Mallikarjuna <vmallika@redhat.com>
* tests: regression, can't run `prove $t` in subdirsv3.6.0beta1Kaleb S. KEITHLEY2014-09-211-2/+7
| | | | | | | | | | | | | | | | | | | In various tests we already use the pattern: . $(dirname $0)/../include.rc to locate various .rc files. Use the same pattern we already use to also find the new env.rc Change-Id: Ib7878c3f7f6491fcec401e9adbaa696ace392fae BUG: 1142420 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/8753 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Harshavardhana <harsha@harshavardhana.net> Tested-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/afr: Set all the xattrs needed by index xlatorAnuradha2014-09-211-0/+58
| | | | | | | | | | | | | | | | | | | | | | | | Backport of: http://review.gluster.org/8652 Index xlator removes the index file from indices xattrop directory in case the value for keys sent are zero. If all the required keys are not set by afr then index file might be removed in an invalid way. With this change all the keys required by index xlator are set by afr such that invalid removal of files does not occur. Change-Id: I1b77904920c8566057415c52242179aec6a015e2 BUG: 1144744 Signed-off-by: Anuradha <atalur@redhat.com> Reviewed-on: http://review.gluster.org/8788 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/afr: perform list-xattr during lookupRavishankar N2014-09-192-1/+51
| | | | | | | | | | | | | Detect and heal mismatching user extended attributes during lookup. Backport of: http://review.gluster.org/8558 Change-Id: Id03c9746f083ffd3014711d0b3a2e5a71a45eed4 BUG: 1144274 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/8773 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/afr : Mark pending changelog xattrs for new creationsAnuradha2014-09-182-0/+128
| | | | | | | | | | | | | | | | | Backport of: http://review.gluster.org/8555 Based on type of file, set appropriate pending changelogs for new entries. Change-Id: Icf9af866fe9a9e511210e8ad097e968e2307d8ee BUG: 1141787 Reviewed-on: http://review.gluster.org/8555 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Signed-off-by: Anuradha <atalur@redhat.com> Reviewed-on: http://review.gluster.org/8748 Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* snapview-server: get the handle if its absent before doing any fopRaghavendra Bhat2014-09-181-5/+17
| | | | | | | | | | | | | | | | | | | | | | | | * Now that NFS server does inode linking in readdirp, it can resolve the gfid (i.e. find the right inode from its inode table) present in the filehandle sent by the NFS client on which a fop came. So instead of sending the lookup on that entry, it directly sends the fop. But snapview-server does not get the handle for the entries in readdirp (because doing a lookup on each entry via gfapi would be costly. So it waits till a lookup is done on that inode, to get the handle and the fs instance and fill it in the inode context). So when NFS resoves the gfid and directly sends the fop, snapview-server will not be able to perform the fop as the inode contet would not contain the fs instance and the handle. So fops should check for the handle before doing gfapi calls. If the handle and fs instance are not present in the inode context they should get them by doing an explicit lookup on the entry. rebase of the patch http://review.gluster.org/#/c/8324/ Change-Id: I70c9c8edb2e7ddad79cf6ade3e041b9d02241cd1 BUG: 1143961 Reviewed-on: http://review.gluster.org/8768 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* snapview-server: register a callback with glusterd to getRaghavendra Bhat2014-09-181-0/+16
| | | | | | | | | | | | | | | | | | | notifications * As of now snapview-server is polling (sending rpc requests to glusterd) to get the latest list of snapshots at some regular time intervals (non configurable). Instead of that register a callback with glusterd so that glusterd sends notifications to snapd whenever a snapshot is created/deleted and snapview-server can configure itself. rebase of the patch http://review.gluster.org/#/c/8150/ Change-Id: Iee2582b1a823d50c79233a41cf2106f458b40691 BUG: 1143961 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/8767 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/afr: Propagate EIO on inode's type mismatchKrutika Dhananjay2014-09-161-0/+129
| | | | | | | | | | | | | | | | Backport of: http://review.gluster.org/8574, and http://review.gluster.org/8586 Original author of the test script: Pranith Kumar K <pkarampu@redhat.com> Change-Id: I0c32bdd8e666f8175c0a8fbf940934e6ce469931 BUG: 1136830 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/8706 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/afr: Handle EAGAIN properly in inodelkPranith Kumar K2014-09-151-1/+0
| | | | | | | | | | | | | | | | | Problem: When one of the brick is taken down and brough back up in a replica pair, locks on that brick will be allowed. Afr returns inodelk success even when one of the bricks already has the lock taken. Fix: If any brick returns EAGAIN return failure to parent xlator. BUG: 1142020 Change-Id: Iee3f5990be75e10f8accec9bc3856e3f76d1593c Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/8744 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* test: cleanup should clean all left over (stale) mountsAtin Mukherjee2014-09-131-4/+7
| | | | | | | | | | | | | | | | | | | This is a temporary work around to fix the spurious failures seen in ec testcases. As per the initial analysis it looks like quota (glusterd_quota_initiate_fs_crawl) is causing a mount point in /tmp to be stale. Once the root cause is identified this fix can be reverted as well. Backport of http://review.gluster.org/#/c/8703/ Change-Id: I8686f144ed298124074f749e75c13028ec00be01 BUG: 1141187 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/8703 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Justin Clift <justin@gluster.org> Reviewed-by: Xavier Hernandez <xhernandez@datalab.es> Reviewed-by: Vijay Bellur <vbellur@redhat.com> Reviewed-on: http://review.gluster.org/8708
* ec: Removed SSE2 dependencyXavier Hernandez2014-09-121-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements the Galois Field multiplications using pure C code without any assembler support. This makes the ec xlator portable to other architectures. In the future it will be possible to use an optimized implementation of the multiplications using architecture dependent facilities (it will be automatically detected and configured). To allow bricks with different machine word sizes to be able to work seamlessly in the same volume, the minimum fragment length to be stored in any brick has been fixed to 512 bytes. Otherwise, different implementations will corrupt the data (SSE2 used 128 bytes, while new implementation would have used 64). This patch also removes the '-msse2' option added on patch http://review.gluster.org/8396/ This is a backport of http://review.gluster.org/8413/ Change-Id: Iaf6e4ef3dcfda6c68f48f16ca46fc4fb61a215f4 BUG: 1140845 Signed-off-by: Xavier Hernandez <xhernandez@datalab.es> Reviewed-on: http://review.gluster.org/8701 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* storage/posix: Prefer gfid links for inode-handlePranith Kumar K2014-09-122-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/8575 Problem: File path could change by other entry operations in-flight so if renames are in progress at the time of other operations like open, it may lead to failures. We observed that this issue can also happen while renames and readdirps/lookups are in progress because dentry-table is going stale sometimes. Fix: Prefer gfid-handles over paths for files. For directory handles prefering gfid-handles hits performance issues because it needs to resolve paths traversing up the symlinks. Tests which test if files are opened should check on gfid path after this change. So changed couple of tests to reflect the same. Note: This patch doesn't fix the issue for directories. I think a complete fix is to come up with an entry operation serialization xlator. Until then lets live with this. BUG: 1136821 Change-Id: If93e46d542a4e96a81a0639b5210330f7dbe8be0 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/8594 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* mount/fuse: Handle fd resolution failuresPranith Kumar K2014-09-122-0/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/8402 Problem: Even when the fd resolution failed, the fop is continuing on the new graph which may not have valid inode. This lead to NULL layout subvols in dht which lead to crash in fsync after graph migration. Fix: - Remove resolution error handling in FUSE_FOP as it was only added to handle fd migration failures. - check in fuse_resolve_done for fd resolution failures and fail the fop right away. - loc resolution failures are already handled in the corresponding fops. - Return errno from state->resolve.op_errno in resume functions. - Send error to fuse on frame allocation failures. - Removed unused variable state->resolved - Removed unused macro FUSE_FOP_COOKIE BUG: 1136827 Change-Id: I4010b7fccd7d8caf0ce4e7629e81b605102d8fb4 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/8592 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* tests: metadata self-heal testsPranith Kumar K2014-09-121-0/+133
| | | | | | | | | | | | Backport of http://review.gluster.org/8515 BUG: 1136826 Change-Id: Iebbf5ac58e7bf884221638ad10b19dee60b6ea56 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/8591 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Ravishankar N <ravishankar@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/dht: Fix dht_access treating directory like filesShyam2014-09-091-0/+100
| | | | | | | | | | | | | | | | | | | | | | | | | When the cluster topology changes due to add-brick, all sub volumes of DHT will not contain the directories till a rebalance is completed. Till the rebalance is run, if a caller bypasses lookup and calls access due to saved/cached inode information (like NFS server does) then, dht_access misreads the error (ESTALE/ENOENT) from the new subvolumes and incorrectly tries to handle the inode as a file. This results in the directories in memory state in DHT to be corrupted and not heal even post a rebalance. This commit fixes the problem in dht_access thereby preventing DHT from misrepresenting a directory as a file in the case presented above. Change-Id: Idcdaa3837db71c8fe0a40ec0084a6c3dbe27e772 BUG: 1138393 Signed-off-by: Shyam <srangana@redhat.com> Reviewed-on-master: http://review.gluster.org/8462 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com> Reviewed-on: http://review.gluster.org/8608 Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* cluster/afr: Set pending changelog based on filetype for new entriesPranith Kumar K2014-09-071-0/+28
| | | | | | | | | | | Backport of http://review.gluster.org/8506 BUG: 1136822 Change-Id: Ia864040306405acf9ebddabf63e87dc2016372dd Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/8588 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
generated by cgit (git 2.34.1) at 2024-05-14 20:46:20 +0000