summaryrefslogtreecommitdiffstats
path: root/tests/bugs
Commit message (Collapse)AuthorAgeFilesLines
* quota: reduce latency for testcase ./tests/bugs/quota/bug-1293601.tvmallika2016-03-041-5/+3
| | | | | | | | | | | | | | | | Currently test-case './tests/bugs/quota/bug-1293601.t' runs quota enable and disable 10 times each, which take a long time. This is not a real use-case and it is enough to test once. Change-Id: Ic282d66438f89721f3c392929047ba42b85ad155 BUG: 1313300 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/13556 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* tests/quota : improving tests for quotaManikandan Selvaganesh2016-03-0321-486/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | tests/basic/quota.t includes all the basic test that needs to be tested for quota. In most of the other tests specific to bugs(tests/bugs/quota/*), tests such as creating and starting volume, enabling quota, setting limit, writing data, doing list have been done which is essential to write a individual quota test file, but, if the specific bug just needs to test *few* particular cases, I have moved those tests under tests/basic itself to speedup the regressions. Basics of inode-quota and it's enforcing, renaming with quota are basic tests and is hence moved under tests/basic folder. In other files, I have removed tests which are not needed, such as 'pidof glusterd' or checking for 'gluster volume info' or if there are any test which is already being tested under tests/basic and is being written again. Change-Id: Iefd6d9529246d59829cc5bf02687a1861d8462a8 BUG: 1294826 Signed-off-by: Manikandan Selvaganesh <mselvaga@redhat.com> Reviewed-on: http://review.gluster.org/13216 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijaikumar Mallikarjuna <vmallika@redhat.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* mgmt/glusterd: Show features.shard option in volume-set-help outputKrutika Dhananjay2016-03-021-0/+14
| | | | | | | | | | | | Change-Id: If9004c4374b92d058cf56add50a91ecad43a2840 BUG: 1261773 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/13565 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* afr: Add throttled background client-side healsRavishankar N2016-03-014-34/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | If a heal is needed after inode refresh (lookup, read_txn), launch it in the background instead of blocking the fop (that triggered refresh) until the heal happens. afr_replies_interpret() is modified such that the heal is launched only if atleast one sink brick is up. Max. no of heals that can happen in parallel is configurable via the 'background-self-heal-count' volume option. Any number greater than that is put in a wait queue whose length is configurable via 'heal-wait-queue-leng' volume option. If the wait queue is also full, further heals will be ignored. Default values: background-self-heal-count=8, heal-wait-queue-leng=128 Change-Id: I1d4a52814cdfd43d90591b6d2ad7b6219937ce70 BUG: 1297172 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/13207 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* tests: fix bug-860663.tJeff Darcy2016-02-291-6/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | Three changes: * Removed the second round of file creation, which wasn't really testing anything useful and was causing spurious failures. Under the conditions we've set up, the rational expectation would be for the file-creation helper program to succeed, but the test expected it to fail. * Removed Yet Another Unnecessary Sleep. * Reduced the number of files from 10K to 1K. That's more than sufficient to test what we're trying to test, and saves significant time. Change-Id: If1c623853745ab42ce7d058d1009bbe1dcc1e985 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/13544 Reviewed-by: Joseph Fernandes Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: N Balachandran <nbalacha@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* glusterd: check if glusterd is started on all nodes and allSakshi2016-02-281-2/+7
| | | | | | | | | | | | | bricks are started before performing rebalance Change-Id: I458ea9cd86cf35bdb7d758be55f951ae9f3e66f0 BUG: 1224857 Signed-off-by: Sakshi <sabansal@redhat.com> Reviewed-on: http://review.gluster.org/10906 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* geo-rep: Mask xtime and stime xattrsKotresh HR2016-02-261-0/+43
| | | | | | | | | | | | | | | | | | | | | Allow access to xtime and stime xattrs only to gsyncd client and mask them for the rest. This is to prevent afr from performing self healing on marker xtime and geo-rep stime xattr which is not expected as each of which gets updated them from backend brick and should not be healed. Change-Id: I24c30f3cfac636a55fd55be989f8db9f8ca10856 BUG: 1296496 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/13242 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Vijaikumar Mallikarjuna <vmallika@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* tests/glusterd: Parse the new time formatMohammed Rafi KC2016-02-251-2/+2
| | | | | | | | | | | | | | | | | | A recent change in cli changed elapsed time format that broke a test. This patch will fix the issue with parsing. Change-Id: I9a4a4b28f654cf2ac223e25abfc9df6570607d74 BUG: 1312036 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/13524 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Ravishankar N <ravishankar@redhat.com> Reviewed-by: Raghavendra Talur <rtalur@redhat.com>
* tests: remove-brick commit getting executed before migration has completedSakshi Bansal2016-02-241-0/+2
| | | | | | | | | | | | | | | | Remove brick commit will fail when it is executed while rebalance is in progress. Hence added a rebalance timeout check before remove-brick commit to enusre that rebalance has completed. Change-Id: Ic12f97cbba417ce8cddb35ae973f2bc9bde0fc80 BUG: 1225716 Signed-off-by: Sakshi Bansal <sabansal@redhat.com> Reviewed-on: http://review.gluster.org/13191 Reviewed-by: Gaurav Kumar Garg <ggarg@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra Talur <rtalur@redhat.com>
* glusterd/rebalance: initialize defrag variable after glusterd restartMohammed Rafi KC2016-02-221-0/+61
| | | | | | | | | | | | | | | | | During reblance restart after glusterd restarted, we are not connecting to rebalance process from glusterd, because the defrag variable in volinfo will be null. Initializing the variable will connect the rpc Change-Id: Id820cad6a3634a9fc976427fbe1c45844d3d4b9b BUG: 1303028 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/13319 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Dan Lambright <dlambrig@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* glusterd: volume should not start when server quorum is not metGaurav Kumar Garg2016-02-221-0/+18
| | | | | | | | | | | | | | | | | Currently when server quorum is not met then upon executing # gluster volume start [force] command its starting the volume. With this patch if server side quorum is not met then it will prevent starting of the volume. Change-Id: I39734b2dcf8e90c3c68bf2762d8350aecc82cc38 BUG: 1308402 Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> Reviewed-on: http://review.gluster.org/13442 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* heal: Remove sleep()Pranith Kumar K2016-02-111-4/+4
| | | | | | | | | | | | | | | | | | I wrote this program from a sample gfapi program which had sleep. I am not sure why this sleep was needed. So removing it now. Changed tests/bugs/replicate/bug-1190069-afr-stale-index-entries.t to execute count_sh_entries every second, instead of comparing same value over and over. Change-Id: I7b89d6cab3e50bb7bf4d40a6064f2d8734155bea BUG: 1306199 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/13421 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com>
* uss: validate USS option features.snapshot-directoryvmallika2016-02-091-35/+0
| | | | | | | | | | | | | | | | | | | USS option features.snapshot-directory contains only 'alphanum, -, _, .' starts with dot (.) value cannot exceed 255 characters and throws error for any other argument. Change-Id: Iad64635206ddf5599351020d99aafb3dd9d17bc1 BUG: 1168819 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/9209 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Avra Sengupta <asengupt@redhat.com> Reviewed-by: Manikandan Selvaganesh <mselvaga@redhat.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* cluster/afr: Fix heal-info slow response while IO is in progressKrutika Dhananjay2016-02-031-0/+43
| | | | | | | | | | | | | | | | | | Now heal-info does an open() on the file being examined so that the client at some point sees open-fd count being > 1 and releases the eager-lock so that heal-info doesn't remain blocked forever until IO completes. Change-Id: Icc478098e2bc7234408728b54d8185102b3540dc BUG: 1297695 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/13326 Reviewed-by: Ravishankar N <ravishankar@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* tests : Modifying crypt xlators unit testsJiffin Tony Thottan2016-01-241-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The "encryption.master-key" should be set before enabling crypt xlators. Otherwise glusterfs client process(like gluster-NFS) will crash due to the failure in intialising crypt xlator. You can see the following messages in client log file [2016-01-14 08:13:15.740835] E [crypt.c:4298:master_set_master_vol_key] 0-test1-crypt: FATAL: missing master key [2016-01-14 08:13:15.740859] E [MSGID: 101019] [xlator.c:429lator_init] 0-test1-crypt: Initialization of volume 'test1-crypt' failed, review your volfile again [2016-01-14 08:13:15.740890] E [MSGID: 101066] [graph.c:324:glusterfs_graph_init] 0-test1-crypt: initializing translator failed [2016-01-14 08:13:15.740904] E [MSGID: 101176] [graph.c:670:glusterfs_graph_activate] 0-graph: init failed [2016-01-14 08:13:15.741676] W [glusterfsd.c:1231:cleanup_and_exit] (-->/usr/sbin/glusterfs(mgmt_getspec_cbk+0x307) [0x40d287] -->/usr/sbin/glusterfs(glusterfs_process_volfp+0x117) [0x4086c7] -->/usr/sbin/glusterfs(cleanup_and_exit+0x4d) [0x407e1d] ) 0-: received signum (0), shutting down Change-Id: I124deda505d128eacb15ca20fbdcd1593cb8eba3 BUG: 1298520 Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> Reviewed-on: http://review.gluster.org/13240 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* features/shard: Implement zerofill FOPKrutika Dhananjay2016-01-222-0/+109
| | | | | | | | | | | | Change-Id: Iabb89a502cc560edd7fe3755623c74a2ccb853d5 BUG: 1261841 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/13234 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* tests: Fix spurious failure in bug-1221481-allow-fops-on-dir-split-brain.t.Krutika Dhananjay2016-01-221-4/+1
| | | | | | | | | | | | | | | | | | | | Occasionally, when ls is executed, prior to READDIRP, a STAT is wound on the operand directory. And AFR fails STAT with EIO if it is in metadata split-brain which "dir" is in the test case in question. As a result, ls also fails with EIO, causing test 20 to return negative exit status. The fix is in the test script where the parts that cause the dir to go into metadata split-brain have been removed. Now "dir" will only have entry split-brain. Change-Id: I4e4e6ba0a2401c7168719cd44e5f4f4bcb8fdd89 BUG: 1295702 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/13172 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* features/shard: Implement fallocate FOPKrutika Dhananjay2016-01-181-0/+47
| | | | | | | | | | | | Change-Id: I6f07074e94b115f6c6c2c59a8a1b58ba44b1c12a BUG: 1261841 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/13196 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* glusterd: import/export brickinfo->uuidAtin Mukherjee2016-01-101-0/+31
| | | | | | | | | | | | | | | | | | | | | | | | | Given a two node cluster with node N1 & N2, if a dummy node N3 is peer probed, the probed node N3 goes for importing volumes from the probing node (N1), but it still doesn't have information about the other node (N2) about its membership (since peer update happens post volume updates) and hence fail to update its brick's uuid. Post that even though N2 updates N3 about its membership the brick's uuid was never generated. Now as a consequence when N3 initiates a detach of N2, it checks whether the node to be detached has any bricks configured by its respective uuid which is NULL in this case and hence it goes ahead and removes the peer which ideally it shouldn't have (refer to glusterd_friend_contains_vol_bricks () for the logic) Fix is to export brick's uuid and import it at the probed node instead of resolving it. Change-Id: I2d88c72175347550a45ab12aff0ae248e56baa87 BUG: 1293414 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/13047 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Gaurav Kumar Garg <ggarg@redhat.com> Reviewed-by: Avra Sengupta <asengupt@redhat.com>
* features/bitrot: add check for corrupted object in f{stat}Venky Shankar2016-01-101-0/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | Check for corrupted objects is done bt bitrot stub component for data operations and such fops are denied processing by returning EIO. These checks were not done for operations such as get/set extended attribute, stat and the likes - IOW, stub only blocked pure data operations. However, its necessary to have these checks for certain other fops, most importantly stat (and fstat). This is due to the fact that clients could possibly get stale stat information (such as size, {a,c,m}time) resulting in incorrect operation of the application that rely on these fields. Note that, the data that replication would take care of fetching good (and correct) data, but the staleness of stat information could lead to data inconsistencies (e.g., rebalance, tier). Change-Id: I5a22780373b182a13f8d2c4ca6b7d9aa0ffbfca3 BUG: 1296399 Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/13120 Reviewed-by: Kotresh HR <khiremat@redhat.com> Reviewed-by: mohammed rafi kc <rkavunga@redhat.com> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* quota: handle quota xattr removal when quota is enabled againvmallika2016-01-071-0/+35
| | | | | | | | | | | | | | | | When a quota is disable and enabled again before completing the cleanup operation, this can remove the new xattrs and quota accounting can become wrong Remove removing the xattr, check if quota enabled again and the xattr is new Change-Id: Idda216f1e7346a9b843dbc112ea3e6faa9c47483 BUG: 1293601 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/13065 Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com>
* tests: handle bad objects during lookup/inode_refreshRavishankar N2015-12-281-0/+53
| | | | | | | | | | | Change-Id: I1848f0e9243c9376e0deba6738757350fe8b704a BUG: 1290965 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/13044 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* performance/write-behind: retry "failed syncs to backend"Raghavendra G2015-12-223-35/+162
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. When sync fails, the cached-write is still preserved unless there is a flush/fsync waiting on it. 2. When a sync fails and there is a flush/fsync waiting on the cached-write, the cache is thrown away and no further retries will be made. In other words flush/fsync act as barriers for all the previous writes. The behaviour of fsync acting as a barrier is controlled by an option (see below for details). All previous writes are either successfully synced to backend or forgotten in case of an error. Without such barrier fop (especially flush which is issued prior to a close), we end up retrying for ever even after fd is closed. 3. If a fop is waiting on cached-write and syncing to backend fails, the waiting fop is failed. 4. sync failures when no fop is waiting are ignored and are not propagated to application. For eg., a. first attempt of sync of a cached-write w1 fails b. second attempt of sync of w1 succeeds If there are no fops dependent on w1 are issued b/w a and b, application won't know about failure encountered in a. 5. The effect of repeated sync failures is that, there will be no cache for future writes and they cannot be written behind. fsync as a barrier and resync of cached writes post fsync failure: ================================================================== Whether to keep retrying failed syncs post fsync is controlled by an option "resync-failed-syncs-after-fsync". By default, this option is set to "off". If sync of "cached-writes issued before fsync" (to backend) fails, this option configures whether to retry syncing them after fsync or forget them. If set to on, cached-writes are retried till a "flush" fop (or a successful sync) on sync failures. fsync itself is failed irrespective of the value of this option, when there is a sync failure of any cached-writes issued before fsync. Change-Id: I6097c9257bfb9ee5b15616fbe6a0576ae9af369a Signed-off-by: Raghavendra G <rgowdapp@redhat.com> BUG: 1279730 Reviewed-on: http://review.gluster.org/12594
* cluster/afr: Fix data loss due to race between sh and ongoing writeKrutika Dhananjay2015-12-221-0/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: When IO is happening on a file and a brick goes down comes back up during this time, protocol/client translator attempts reopening of the fd on the gfid handle of the file. But if another client renames this file while a brick was down && writes were in progress on it, once this brick is back up, there can be a race between reopening of the fd and entry self-heal replaying the effect of the rename() on the sink brick. If the reopening of the fd happens first, the application's writes continue to go into the data blocks associated with the gfid. Now entry-self-heal deletes 'src' and creates 'dst' file on the sink, marking dst as a 'newentry'. Data self-heal is also completed on 'dst' as a result and self-heal terminates. If at this point the application is still writing to this fd, all writes on the file after self-heal would go into the data blocks associated with this fd, which would be lost once the fd is closed. The result - the 'dst' file on the source and sink are not the same and there is no pending heal on the file, leading to silent corruption on the sink. Fix: Leverage http://review.gluster.org/#/c/12816/ to ensure the gfid handle path gets saved in .glusterfs/unlink until the fd is closed on the file. During this time, when self-heal sends mknod() with gfid of the file, do the following: link() the gfid handle under .glusterfs/unlink to the new path to be created in mknod() and rename() the gfid handle to go back under .glusterfs/ab/cd/. Change-Id: I86ef1f97a76ffe11f32653bb995f575f7648f798 BUG: 1292379 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/13001 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* glusterd/afr: store afr pending xattrs as a volume optionRavishankar N2015-12-152-0/+2
| | | | | | | | | | | | | | | | | | | | | | | Problem: When AFR xlator initialises, it uses the name of the client xlators below it for storing the pending changelogs (xattrs). This can be problem when some other xlator is loaded in between AFR and the client. Though that is a trivial 'traverse-graph-till-the-client-and-use-the-name' fix in AFR's init(), there are other issues like when there's no client xlator at all when, say, AFR is moved to the server side. Fix: The client xlator names are currenly unique and stored as brickinfo->brick_ids. So persist these ids as comma separated values in AFR's volume_options and use them as xattr values during init(). Change-Id: Ie761ffeb3373a4c4d85ad05c84a768c4188aa90d BUG: 1285152 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/12738 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* tests:bugs:fuse: add setup.sh and teardown.sh to facilitate manual testingMichael Adam2015-12-112-0/+25
| | | | | | | | | | Change-Id: Ia8fe402663bbdabdc10c18ab42a2063466eb42b6 BUG: 1286735 Signed-off-by: Michael Adam <obnox@samba.org> Reviewed-on: http://review.gluster.org/12830 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* tests:bugs:fuse: add test for bug #1283103 - selinux mount vs security xattrsMichael Adam2015-12-111-0/+59
| | | | | | | | | | BUG: 1283103 Change-Id: Ic4485d650275f67eb6b0b8382a92eb829c06e27c Signed-off-by: Michael Adam <obnox@samba.org> Reviewed-on: http://review.gluster.org/12827 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* tests, shard: Remove dependency on strict-write-orderingKrutika Dhananjay2015-12-105-10/+9
| | | | | | | | | | Change-Id: I00171a77bdefb1c2e7e4610cb0ade5679bdb761f BUG: 1289840 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/12915 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* tests/tier: spurious failure in rename testN Balachandran2015-12-101-4/+8
| | | | | | | | | | | | | | | bug-1279376-rename-demoted-file.t fails sometimes The fix is based on the assumption that the test failed because the demotion happened too quickly. Change-Id: Ieccc736f387fcf6afaa72fa9918adb6dd34f2c8a BUG: 1289845 Signed-off-by: N Balachandran <nbalacha@redhat.com> Reviewed-on: http://review.gluster.org/12926 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Tested-by: Dan Lambright <dlambrig@redhat.com>
* tests/bug-924726.t: fix grep pattern to get correct glusterfs pidRaghavendra G2015-12-091-1/+1
| | | | | | | | | Change-Id: Ia2444b1b3e45e3e224bcd59e780a0f38c492f133 BUG: 1289428 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/12906 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* tests: fix brick_up_statusKaushal M2015-12-093-3/+3
| | | | | | | | | | | | | | | The brick_up_status function wasn't correct after the introduction of the RDMA port into the `volume status` output. It has been fixed to use the XML brick status of a specific brick instead of normal CLI output. Change-Id: I5327e1a32b1c6f326bc3def735d0daa9ea320074 BUG: 1289584 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/12913 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* quota: copy quota_version value in func glusterd_volinfo_dupvmallika2015-12-081-0/+48
| | | | | | | | | | | | | | | | | | | | | quota_version is a new variable introduced for quota xattr versioning feature. quota_version was not copied when creating duplicate volinfo in function 'glusterd_volinfo_dup' so any feature like snapshot/tiering using glusterd_volinfo_dup will get the default value of quota_version instead of the correct number and can cause a problem Change-Id: I7b0f418002d49aa7210e2e741e65ee5b2593e6a6 BUG: 1288474 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/12881 Reviewed-by: Manikandan Selvaganesh <mselvaga@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd/quota: quota-version conflict in export/import volinfovmallika2015-12-081-0/+24
| | | | | | | | | | | | | | | When exporting/importing voinfo during handshake, quota conf and quota xattr version were using same key 'quota-version' and updated wrong values when importing quota version values. Change-Id: If939d6f5bc4851d4114963877be72dda21834f0f BUG: 1287996 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/12865 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* tier/glusterd: Check before starting tier daemon during volume startMohammed Rafi KC2015-12-081-0/+72
| | | | | | | | | | | | | | | | | We start tier daemon when volume is started without looking into the previous status. The problem with that if detach-tier is started and then volume force start is actually starting tier daemon. This is also fixes a problem where tier daemon is not starting after detach stop. Change-Id: I15b56a711e12f0e24f5ab123561258bd448621f7 BUG: 1286974 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/12833 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* snapshot/clone : Fix tier pause failure for snapshot cloneAvra Sengupta2015-12-022-8/+30
| | | | | | | | | | | | | | | | | | | | On a tiered volume, snapshot clone fails while trying to pause tier, as we pass volname(snap) to the brick_op_phase module, which tries to look for the snap volume amongst regular volumes, and obviously doesn't find it and fail. Well as snapshot volumes are read only volume, and will not have tiering daemon acting upon them, there is really no need to pause tiereing while taking clone of snapshot volumes. Hence removing the code to pause and resume tiering during clone create. Change-Id: I2266aba589a830a13a806c0d8a56fd8855143ccd BUG: 1279327 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/12548 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* cluster/tier: Do not delete linkto file on demotionN Balachandran2015-11-181-0/+88
| | | | | | | | | | | | | | | | | The current DHT migration code will always delete the src linkto file after migration as dht always moves files to the hashed subvol. This is not the case in tiering. The lack of linkto files causes rename to fail leaving 2 files with the same name but different gfids on the volume. Modified to leave the linkto file behind if the source volume is the hashed subvolume. Change-Id: I2b99f7d34b4b719aee6232dc40c6a8f8ba88225d BUG: 1279376 Signed-off-by: N Balachandran <nbalacha@redhat.com> Reviewed-on: http://review.gluster.org/12551 Reviewed-by: Dan Lambright <dlambrig@redhat.com> Tested-by: Dan Lambright <dlambrig@redhat.com>
* quota: fix spurious failurevmallika2015-11-171-2/+1
| | | | | | | | | | Change-Id: I5d18533d66df3175752a73430f680dcdfdb3c12a BUG: 1278689 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/12546 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* features/gfid-access: Fix entry creation via setxattr for geo-repKotresh HR2015-11-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | GEO-REP INTEROP WITH SHARD FEATURE Problem: Geo-replication uses setxattr interface of gfid-access xlator to create entries and send explicit setattr after entry creation to set uid and gid. But between entry creation and setattr, the inode would not be linked. Hence operation which accesses inode structure during setattr by any the below xlator fails. Solution: Linking inode would seem the obvious solution but, gfid-access xlator cannot link inodes and maintain it as it would result in same inode pointing to two different paths one being virtual .gfid/<gfid> path and other being actual path. The solution is to set uid and gid in frame->root->uid and frame->root->gid respectively from which posix extracts and sets. Change-Id: Ic0749ee471432caeb8ded3152a07de6e64d8538d BUG: 1265148 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/12206 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Aravinda VK <avishwan@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* quota: fix for spurious failurevmallika2015-11-061-0/+3
| | | | | | | | | | | | | | Filed a bug# 1278689. For now marking the testcase tests/bugs/quota/bug-1235182.t' bad once the bug# 1278689, remove the testcase from bad list Change-Id: I224f907153d3e5f35834007a40b0050246d8787a BUG: 1278689 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/12526 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Tested-by: Dan Lambright <dlambrig@redhat.com>
* snapshot: Making bug-1275616.t more regression failure tolerantAvra Sengupta2015-11-061-0/+10
| | | | | | | | | | | | | | | | | | | snapshot clone creation fails 'spuriously' on the regression setup coz the brick rpc connect for snap3 in the testcase, happens way after the snap was created. So adding a EXPECT_WITHIN $PROCESS_UP_TIMEOUT check(read delay) to help the cause. But this isn't a 100% guaranteed fix, as on an even slower machine, even this check will fail followed by the subsequent failures that this patch is trying to fix in the first place Change-Id: I2f31558b717fd610111f14e451fe444c09f3f254 BUG: 1278418 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/12516 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: mohammed rafi kc <rkavunga@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* snapshot: Inherit snap-max-hard-limit from original volumeAvra Sengupta2015-11-021-0/+48
| | | | | | | | | | | | | | | | | | A snapshot should inherit snap-max-hard-limit from the original volume while being created and when being restored to, it should restore the same. Similarly a clone taken from a snapshot should inherit snap-max-hard-limit from the snapshot. Change-Id: If8e90e2ffc10e22086b803ac8e2638a16bcec968 BUG: 1275616 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/12437 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: mohammed rafi kc <rkavunga@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* snapshot: Don't display snapshot's hard-limit and soft-limit in vol infoAvra Sengupta2015-11-021-5/+6
| | | | | | | | | | | | | | | | | | | | | | | The snap-max-hard-limit being displayed in the volume info currently is propagated from system's snap-max-hard-limit as that is a global option common for all volumes, and hence ends up showing the system's snap-max-hard-limit. We should not be displaying snap-max-hard-limit and snap-max-soft-limit in the volume info at all, as these are snap config options and should be set and displayed via snap config command. Modified bug-1113476.t to test the same behaviour. Change-Id: I90891f0cf7fb39fd686787297c7f7cd8c1e7daa1 BUG: 1276018 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/12443 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: mohammed rafi kc <rkavunga@redhat.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org>
* quota: add version to quota xattrsvmallika2015-11-021-2/+2
| | | | | | | | | | | | | | | | | | | | | When a quota is disable and the clean-up process terminated without completely cleaning-up the quota xattrs. Now when quota is enabled again, this can mess-up the accounting A version number is suffixed for all quota xattrs and this version number is specific to marker xaltor, i.e when quota xattrs are requested by quotad/client marker will remove the version suffix in the key before sending the response Change-Id: I1ca2c11460645edba0f6b68db70d476d8d26e1eb BUG: 1272411 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/12386 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Manikandan Selvaganesh <mselvaga@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* features/shard: Force cache-refresh when lookup/readdirp/stat detect that ↵Krutika Dhananjay2015-10-281-0/+36
| | | | | | | | | | | xattr value has changed Change-Id: Ia3225a523287f6689b966ba4f893fc1b1fa54817 BUG: 1272986 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/12400 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* features/snap : cleanup the root loc in statfsAshish Pandey2015-10-201-0/+25
| | | | | | | | | | | | | | | | Problem : In svc_statfs function, wipe_loc is getting called on loc passed by nfs. This loc is being used by svc_stat which throws erro if loc->inode is NULL. Solution : wipe_loc should be called on local root_loc. Change-Id: I9cc5ee3b1bd9f352f2362a6d997b7b09051c0f68 BUG: 1260848 Signed-off-by: Ashish Pandey <aspandey@redhat.com> Reviewed-on: http://review.gluster.org/12123 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* glusterd: disabling enable-shared-storage option should not delete volumeGaurav Kumar Garg2015-10-131-0/+36
| | | | | | | | | | | | | | | | | | | Previously when you create volume with "glusterd_shared_storage" name and if user disable enable-shared-storage option then gluster will delete the "glusterd_shared_storage" volume. With this fix gluster will do appropriate validation of enable-shared-storage option and it will not delete volume with "glusterd_shared_storage" name if it is a user created volume. Change-Id: I2bd92f938fb3de6ef496a934933bdcea9f251491 BUG: 1266818 Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> Reviewed-on: http://review.gluster.org/12232 Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Anand Nekkunti <anekkunt@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* quota/marker: dir_count accounting is not atomicvmallika2015-10-121-0/+50
| | | | | | | | | | | | | | | | | | | | | | | Consider below scenario: Quota enabled on pre-existing data Now quota-crawl process will start healing xattrs Now if write is performed where healing is not complete, there is a possibility that 'update txn' is started before 'create xattr txn', in this case dir count can be missed on a dir where quota size xattr is not yet created. Solution is to get size xattr and if xattr is missing, add 1 for dir_count, this requires one additional fop if done in marker during each update iteration Better solution is to us xattrop GF_XATTROP_ADD_ARRAY64_WITH_DEFAULT Change-Id: Idc8978860a3914e70c98f96effeff52e9a24e6ba BUG: 1243798 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/11694 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* xlators: add JSON FOP statistics dumps every N secondsRichard Wareing2015-10-083-3/+13
| | | | | | | | | | | | | | | | | | | | | | | Summary: - Adds a thread to the io-stats translator which dumps out statistics every N seconds where N is configurable by an option called "diagnostics.stats-dump-interval" - Thread cleanly starts/stops when translator is unloaded - Updates macros to use "Atomic Builtins" (e.g. intel CPU extentions) to use memory barries to update counters vs using locks. This should reduce overhead and prevent any deadlock bugs due to lock contention. Test Plan: - Test on development machine - Run prove -v tests/basic/stats-dump.t Change-Id: If071239d8fdc185e4e8fd527363cc042447a245d BUG: 1266476 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/12209 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Avra Sengupta <asengupt@redhat.com>
* quota: use copy_frame when creating new frame during quota_check_limitvmallika2015-10-061-1/+2
| | | | | | | | | | | | | | | | | DHT re-balance, sets frame root PID < 0 and quota_check_limit skips enforcement if this PID is less than 0. When creating new frame for quota_check_limit we need to use copy_frame instead of create_frame, so that all auth information are copied from original frame. Change-Id: Ib3b4a3744f8b0d72a8bc32826f6edae836d6faed BUG: 1267812 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/12265 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* glusterd: validate function for replica volume optionsSakshi2015-10-011-0/+67
| | | | | | | | | | Change-Id: I5b4a28db101e9f7e07f4b388c7a2594051c9e8dd BUG: 1265479 Signed-off-by: Sakshi <sabansal@redhat.com> Reviewed-on: http://review.gluster.org/12215 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
generated by cgit (git 2.34.1) at 2024-05-26 10:49:03 +0000