summaryrefslogtreecommitdiffstats
path: root/tests/bugs
Commit message (Collapse)AuthorAgeFilesLines
* glusterd: quorum calculation should happen on global peer_listAtin Mukherjee2015-01-121-0/+40
| | | | | | | | | | | | | | | Apart from snapshot, for all other transactions quorum should be calculated on global peer list. Change-Id: I30bacdb6521b0c6fd762be84d3b7aa40d00aacc4 BUG: 1177132 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/9422 Reviewed-by: Kaushal M <kaushal@redhat.com> Reviewed-by: Gaurav Kumar Garg <ggarg@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* ec: Remove O_APPEND from flags on create and open.Xavier Hernandez2015-01-091-0/+43
| | | | | | | | | | | | | | | | | | | Allowing O_APPEND flag to pass through to the brick files corrupts fragment contents because writes are not stored on the desired place. Write fop has been modified so that it uses current file size as its write offset. This guarantees that all writes, even those comming from different file descriptors and clients, will write to the end of the file. Change-Id: I9f721f12217a98231fe52e344166d1c94172c272 BUG: 1161621 Signed-off-by: Xavier Hernandez <xhernandez@datalab.es> Reviewed-on: http://review.gluster.org/9079 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* tests: move all test-cases into component subdirectoriesNiels de Vos2015-01-06267-596/+600
| | | | | | | | | | | | | | | | | | | | | | | | | | | | There are around 300 regression tests, 250 being in tests/bugs. Running partial set of tests/bugs is not easy because this is a flat directory with almost all tests inside. It would be valuable to make partial test/bugs easier, and allow the use of mulitple build hosts for a single commit, each running a subset of the tests for a quicker result. Additional changes made: - correct the include path for *.rc shell libraries and *.py utils - make the testcases pass checkpatch - arequal-checksum in afr/self-heal.t was never executed, now it is - include.rc now complains loudly if it fails to find env.rc Change-Id: I26ffd067e9853d3be1fd63b2f37d8aa0fd1b4fea BUG: 1178685 Reported-by: Emmanuel Dreyfus <manu@netbsd.org> Reported-by: Atin Mukherjee <amukherj@redhat.com> URL: http://www.gluster.org/pipermail/gluster-devel/2014-December/043414.html Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9353 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Emmanuel Dreyfus <manu@netbsd.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* features/uss: Perform NULL check on @name in svc_getxattrKrutika Dhananjay2015-01-021-0/+24
| | | | | | | | | | | | | | | | | | | LISTXATTR fop is internally converted into a GETXATTR with the "name" parameter set to NULL. In svc_getxattr(), a listxattr was causing a crash because of a NULL pointer dereference on @name. FIX: Add the necessary NULL check. Change-Id: I70024d40dc0695648c6d41b423c2665d030e1232 BUG: 1178079 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/9378 Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-by: Vijaikumar Mallikarjuna <vmallika@redhat.com> Reviewed-by: Sachin Pandit <spandit@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* test: Make gfid-access.py more generic.Kotresh HR2014-12-311-2/+2
| | | | | | | | | | | | | | | Few of the hard coded values, uid, gid and file permissions are made as arguments to make the script more generic. Also fixes the permission issue which was hard coded as integer instead of octal. Change-Id: Icec700770de2b7cae00e02f783d072860e6d5e2b BUG: 1176934 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/9366 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Aravinda VK <avishwan@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* quota: For a rename operation, do quota_check_limit only till thevmallika2014-12-271-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | common ancestor of src and dst file Example: set quota limit set to 1GB on / create a file /a1/b1/file1 of 600MB mv /a1/b1/file1 /a1/b1/file2 This rename fails as it takes delta into account which sums up to 1.2BG. Though we are not creating new file, we still get quota exceeded error. So quota enforce should happen only till b1. Similarly: mv /a/b/c/file /a/b/x/y/file quota enforce should happen only till dir 'b' Change-Id: Ia1e5363da876c3d71bd424e67a8bb28b7ac1c7c1 BUG: 1153964 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/8940 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com>
* glusterd: Maintain per transaction xaction_peers list in syncop & mgmt_v3Atin Mukherjee2014-12-221-0/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In current implementation xaction_peers list is maintained in a global variable (glustrd_priv_t) for syncop/mgmt_v3. This means consistency and atomicity of peerinfo list across transactions is not guranteed when multiple syncop/mgmt_v3 transaction are going through. We had got into a problem in mgmt_v3-locks.t which was failing spuriously, the reason for that was two volume set operations (in two different volume) was going through simultaneouly and both of these transaction were manipulating the same xaction_peers structure which lead to a corrupted list. Because of which in some cases unlock request to peer was never triggered and we end up with having stale locks. Solution is to maintain a per transaction local xaction_peers list for every syncop. Please note I've identified this problem in op-sm area as well and a separate patch will be attempted to fix it. Finally thanks to Krishnan Parthasarathi and Kaushal M for your constant help to get to the root cause. Change-Id: Ib1eaac9e5c8fc319f4e7f8d2ad965bc1357a7c63 BUG: 1173414 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/9269 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* features/snapview-client: handle readdir requests differently for sambaRaghavendra Bhat2014-12-091-0/+96
| | | | | | | | | | | * For samba export, the entry point is also added to the readdir response. Change-Id: I825c017e0f16db1f1890bb56e086f36e6558a1c2 BUG: 1168875 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/9218 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* uss/gluster: Send success on parent lookup of entry-pointvmallika2014-12-051-0/+56
| | | | | | | | | | | | | | | | | | When a lookup sent to snapview-server for entry-point directory protocol server first tries to resolve gfid of a parent directory. looking up the parent gfid from a latest snapshot can fail if the volume is a restored volume. As this gfid is already looked-up by snapview-client, we can return success for the parent gfid. Change-Id: Ic9b20561ef79b93032f07c3a81eae54a94e1747b BUG: 1162498 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/9229 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* USS : fill proper uid and gid during a access call from nfsSachin Pandit2014-12-011-0/+201
| | | | | | | | | | | | | | | | | | | | Problem : when an user tries to access a file/folder for which he does not have a proper permission required then fuse gives out a proper error "Permission denied", but nfs does not give out that error, rather he can access the file/folder. The reason being uid and gid of call frame stack takes a default value of uid and gid which point to root permission. Solution : Set a proper uid and gid during a access call from nfs Change-Id: Ib060706fde66ec7e60f242fab1f3e59122ed2245 BUG: 1167580 Signed-off-by: Sachin Pandit <spandit@redhat.com> Reviewed-on: http://review.gluster.org/9194 Reviewed-by: Vijaikumar Mallikarjuna <vmallika@redhat.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd/uss: if snapd is not running, return success from ↵Atin Mukherjee2014-11-301-0/+30
| | | | | | | | | | | | | | | | | | glusterd_handle_snapd_option glusterd_handle_snapd_option was returning failure if snapd is not running because of which gluster commands were failing. Change-Id: I22286f4ecf28b57dfb6fb8ceb52ca8bdc66aec5d BUG: 1168803 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/9206 Reviewed-by: Kaushal M <kaushal@redhat.com> Reviewed-by: Avra Sengupta <asengupt@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijaikumar Mallikarjuna <vmallika@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* Regression test portability: batch of bugs (volume 2)Emmanuel Dreyfus2014-11-2612-14/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix various regression test portability in tests/bugs. bug-861542.t - Avoid syntax specific to GNU sed. bug-860663.t - Command argument length is system dependent, and specifying 1000 file path may overflow it. Use a C program to do the job in a portable and efficient way. - Add a test that we created the specified amount of files. bug-858242.c, bug-808400-fcntl.c, bug-808400-flock.c - fstat64() is Linux-specific. Define it as fstat for other systems. bug-823081.t - Use portable tail -n instead of tail --lines In many tests: - Do not assume python interpreter name. Use $PYTHON as defined in env.rc by configure. utils/libcxattr.py - If python version is 2.6 or higher, use a portable mechanism to recover errno. The original version is retained for python version 2.5 and earlier but it only works on Linux. BUG: 1129939 Change-Id: If2fea1ffec5cc6ab2de426fb200e884450afe61b Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/9097 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* gluster/uss: Handle ESTALE in snapview client when NFS server restartedvmallika2014-11-252-6/+49
| | | | | | | | | | | | | | | When NFS server is restarted inode-context is lost. Nameless lookup will be sent to regular volume. If the gfid is from virtual graph, lookup will fail with ESTALE. We need to send a lookup to snapview server Change-Id: I22920614f0d14cb90b53653fce95b6b70023eba6 BUG: 1166197 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/9153 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Sachin Pandit <spandit@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cli: .cmd_log_history should not be hiddenAtin Mukherjee2014-11-241-4/+5
| | | | | | | | | Change-Id: I4513a2c260530855e09be64083e9344108c7a6c0 BUG: 1165996 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/9150 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* tests: spurious failure fix for bug-1164613.tvmallika2014-11-201-5/+8
| | | | | | | | | | | | | Snapshot bricks are started asynchronously. It might take sometime before accessing the file. Change-Id: I62633974eca21f86632f7005ce6fd5c856b8be90 BUG: 1163543 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/9142 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* gluster/uss: Don't send failure when accessing snap with namevmallika2014-11-171-0/+36
| | | | | | | | | | | | | | | | | | same as entry-point name In a scenario, if the snap name is same as the snap-directory than cd to snaps/snaps fails. Send a lookup to snap-view server instead of failing Change-Id: Ie7b811815ff30961500592bbc8cdb514a9d76ef5 BUG: 1164613 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/9135 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Avra Sengupta <asengupt@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* cluster/dht: Fix subvol check, to correctly determine cached file renameShyam2014-11-171-0/+48
| | | | | | | | | | | | | | | | | | | | | | | | | The check to treat rename as a critical failure ignored when the cached file is being renamed to new name, as the new name falls on the same subvol as the cached file. This is in addition to when the target of the rename does not exist. The current change is simpler, as the rename logic, renames the cached file in case the target exists and falls on the same subvol as source name, OR the target does not exist and the hash of target falls on the same subvol as source cached. These conditions mean we are renaming the source, other conditions mean we are renaming the source linkto file which we do not want to treat as a critical failure (and we also instruct marker that it is an internal FOP and to not account for the same). Change-Id: I4414e61a0d2b28a429fa747e545ef953e48cfb5b BUG: 1161156 Signed-off-by: Shyam <srangana@redhat.com> Reviewed-on: http://review.gluster.org/9063 Reviewed-by: N Balachandran <nbalacha@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: susant palai <spalai@redhat.com> Reviewed-by: venkatesh somyajulu <vsomyaju@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* gNFS : make it possible to mount a subdir that actually is a symlinkjiffin2014-11-141-0/+124
| | | | | | | | | | | | | | | | | We are using the function to export all sub-directories in a gluster volume via nfs. For real directories it works fine but if we have a symbolic link which points to the directory, it is not possible to mount that directory via nfs and the nameof the link. Kernel nfs resolves symlink handle to directoryhandle , similar gluster nfs should resolve the symbolic link handle into directory handle. Change-Id: I8bd07534ba9474f0b863f2335b2fd222ab625dba BUG: 1157223 Signed-off-by: jiffin tony thottan <jthottan@redhat.com> Reviewed-on: http://review.gluster.org/9052 Reviewed-by: soumya k <skoduri@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* uss/snapd: Handle readlink fops on snap view serverAvra Sengupta2014-11-141-0/+38
| | | | | | | | | | | | | Handle readlink fops in case of symlinks on snap view server BUG: 1162462 Change-Id: Ia08e9e9c1c61e06132732aa580c5a9fd5e7c449b Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/9102 Reviewed-by: Vijaikumar Mallikarjuna <vmallika@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* posix: Changed order of chown and chmodVenkatesh Somyajulu2014-11-141-0/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: Rebalance process runs in the root mode. If a normal user create a file and if it requires migration then because the migrated file is created by root, its owner and mode should be changed to the source normal user and permission should be changed the previous mode. If the suid bit is also set, then at the destination suid bit should also be set. Two operations are performed in the given order: 1. chmod 2. chown But chown resets the suid bit. So changed the order of these two operations so that first chown will be performed and then chmod will be performd so that suid bit will be preserved. Change-Id: Ib63b5cf528f8336b69bf090ad43bb02eec1d1602 BUG: 1086228 Signed-off-by: Venkatesh Somyajulu <vsomyaju@redhat.com> Reviewed-on: http://review.gluster.org/7435 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* gNFS: Allow reading ACLs even without read permissions on the file.Meghana Madhusudhan2014-11-131-0/+36
| | | | | | | | | | | | | | | | | | When root-squash is enabled or when no permissions are given to a file, NFS threw permission errors. According to the kernel-nfs behaviour, no permissions are required to read ACLs. When no ACLs are set, the system call sys_lgetxattr fails and returns a ENODATA error. This translates to ESERVERFAULT error in NFS. Fuse makes an exception to this error and returns a success case. Similar changes are made here to achieve the expected behaviour. Change-Id: I46b8f5911114eb087a3f8ca4e921b6b41e83f3b3 BUG: 1161092 Signed-off-by: Meghana Madhusudhan <mmadhusu@redhat.com> Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9085 Tested-by: Gluster Build System <jenkins@build.gluster.com>
* test/uss : activate the snapshot after creating.Sachin Pandit2014-11-131-0/+1
| | | | | | | | | | | | | | | | | | Till now we were activating the snapshot along with the snapshot create. But one of the recent patches has changed that behavior. Now we have to explicitly issue activate-on-create using snapshot config if we want snapshot to be activated during snapshot create. Till patch fixes the regression failure which is seen lately. Change-Id: Ic53b16e22569e521bd70dd3bfa7154a0424151ce BUG: 1155042 Signed-off-by: Sachin Pandit <spandit@redhat.com> Reviewed-on: http://review.gluster.org/9113 Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Meghana M <mmadhusu@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* glusterd/snapshot: Snapshot should be deactivated when it is createdvmallika2014-11-122-0/+32
| | | | | | | | | | | | | | | | | By default snapshot should be deactivated and this should be a configurable option. This behaviour can be configured by the command below: gluster snapshot config activate-on-create <enable|disable> Change-Id: I1911595c32beed43bb2fca4bf99f0d264b422513 BUG: 1157991 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/8985 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Avra Sengupta <asengupt@redhat.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* USS : Display only the activated snapshotsSachin Pandit2014-11-121-0/+35
| | | | | | | | | | | | | | | Instead of displaying all the snapshots in the uss world, it is better if we display only the activated snapshots. Change-Id: I70d3ec212b62ec15956ae3e826bc4201d8dedd17 BUG: 1155042 Signed-off-by: Sachin Pandit <spandit@redhat.com> Reviewed-on: http://review.gluster.org/8958 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Avra Sengupta <asengupt@redhat.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* features/marker: Filter internal xattrs in lookupPranith Kumar K2014-11-111-0/+138
| | | | | | | | | | | | | Afr should ignore quota-size-key as part of self-heal but should heal quota-limit key. Change-Id: Ic0b06bd20a563a00d6bfdc2dc5a76c661e533ecb BUG: 1161106 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/9061 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Regression test portability: batch of bugs (volume 1)Emmanuel Dreyfus2014-11-089-11/+93
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix various regression test portability in tests/bugs. bug-1004744.t: - Slower systems really requires an increased REBALANCE_TIMEOUT in include.rc bug-1023974.t: - use the -p option to mkdir before the path for portability sake. bug-1051896.t and bug-847622.t: - skip ACL test for NetBSD as it has no POSIX 1e ACL support. bugs-1053579.t: - Override the amount of secondary groups depending of the maximum the system supports. - Specify seq(1) format to avoid having trailing .00 - Use more portable su -m USER -c COMMAND (also in bug-884597.t) - NetBSD does not fail high GID with NFS bug-1058663.c: - Depending on architecture, NetBSD can have SIGSEGV instead of SIGBUS bug-762989.t and bug-867253.t: - For non Linux systems, skip tests on features that are Linux-specific bug-765473.t; - Fix a {1} that bash is supposed to expand in 1 but does not, replace by 1. - Sync volume to make sure it imediatly knows a fd got bad BUG: 1129939 Change-Id: I5405f94ccb8f20d35b3095096b0602c43719a1ae Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/9009 Reviewed-by: Xavier Hernandez <xhernandez@datalab.es> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Regression test portability: loopback devicesEmmanuel Dreyfus2014-10-305-49/+99
| | | | | | | | | | | | | | | | | | Introduce functions to deal with loopback devices setup, mount and umount. Remove test for xfsprogs for non Linux systems, as loopback devices can be populated with other filesystems (e.g.: FFS for NetBSD) While there, remove mount.nfs test for non Linux systems. At least NetBSD has it in base system as mount_nfs. BUG: 1129939 Change-Id: I816b36e1d3e6933f92acf19d9be8eeaaa333356e Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/8914 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: statedump supportAtin Mukherjee2014-10-151-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Although glusterd currently has statedump support but it doesn't dump its context information. Implementing glusterd_dump_priv function to export per-node glusterd information would be useful for debugging bugs. Once implemented, we could enhance sos-report to fetch this information. This would potentially reduce our time to root cause and data needed for debugability can be dumped gradually. Following is the main items of the dump list targeted in this patch : * Supported max/min op-version and current op-version * Information about peer list * Information about peer list involved while a transaction is going on (xaction_peers) * option dictionary in glusterd_conf_t * mgmt_v3_lock in glusterd_conf_t * List of connected clients * uuid of glusterd * A section of rpc related information like live connections and their statistics There are couple of issues which were found during implementation and testing phase: - xaction_peers of glusterd_conf_t was not initialized in init because of which traversing through this list head was crashing when there was no active transaction - gf_free was not setting the typestr to NULL if the the alloc count becomes 0 for a mem-type earlier allocated. Change-Id: Ic9bce2d57682fc1771cd2bc6af0b7316ecbc761f BUG: 1139682 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/8665 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* heal: glfs-heal implementationPranith Kumar K2014-10-151-2/+2
| | | | | | | | | | | Thanks a lot to Niels for helping me to get build stuff right. Change-Id: I634f24d90cd856ceab3cc0c6e9a91003f443403e BUG: 1147462 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/6529 Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* gNFS: Subdir mount does not work on UDP protoSantosh Kumar Pradhan2014-10-071-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After enabling nfs.mount-udp, mounting a subdir on a volume over NFS fails. Because mountudpproc3_mnt_3_svc() invokes nfs3_rootfh() which internally calls mnt3_mntpath_to_export() to resolve the mount path. mnt3_mntpath_to_export() just works if the mount path requested is volume itself. It is not able to resolve, if the path is a subdir inside the volume. MOUNT over TCP uses mnt3_find_export() to resolve subdir path but UDP can't use this routine because mnt3_find_export() needs the req data (of type rpcsvc_request_t) and it's available only for TCP version of RPC. FIX: (1) Use syncop_lookup() framework to resolve the MOUNT PATH by breaking it into components and resolve component-by-component. i.e. glfs_resolve_at () API from libgfapi shared object. (2) If MOUNT PATH is subdir, then make sure subdir export is not disabled. (3) Add auth mechanism to respect nfs.rpc-auth-allow/reject and subdir auth i.e. nfs.export-dir (4) Enhanced error handling for MOUNT over UDP Change-Id: I42ee69415d064b98af4f49773026562824f684d1 BUG: 1118311 Signed-off-by: Santosh Kumar Pradhan <spradhan@redhat.com> Reviewed-on: http://review.gluster.org/8346 Reviewed-by: soumya k <skoduri@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* Regression test portability: truncateEmmanuel Dreyfus2014-10-012-2/+2
| | | | | | | | | | | | | | Use truncate -s 1M instead of truncate --size=1m for portability sake BUG: 1129939 Change-Id: I5bf6ca1f9bb4fa3c91796a659a06bf368776b3e5 Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/8894 Reviewed-by: Xavier Hernandez <xhernandez@datalab.es> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Harshavardhana <harsha@harshavardhana.net> Tested-by: Harshavardhana <harsha@harshavardhana.net>
* glusterfs: allow setxattr of keys with null values.Ravishankar N2014-09-291-0/+18
| | | | | | | | | | | | | | | Disk based file systems allow to get/set extended attribute key-value pairs where value can be null. Fuse/libgfapi clients must be able to do the same on a gluster volume. Change-Id: Ifc11134cc07f1a3ede43f9d027554dcd10b5c930 BUG: 1135514 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/8567 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: file-snapshot and features-encryption options should be validate ↵Gaurav Kumar Garg2014-09-251-0/+33
| | | | | | | | | | | | | | | | | | | | | | correctly By giving non-boolean value to volume set command for features.file-snapshot and features.encryption option the command failed after that subsequent volume set request with valid value of the existing any volume set option fail. Previously when user supplies a non-boolean value in volume set command for features.file-snapshot and features.encryption option's then validation of that value was done by volinfo->dict but actual value of that option store in input dictonary. Now with this change it will refer correct dictonary for validation of supplies value. Change-Id: I4a93d8be848cd33fdf4b4eb9b1a8d15ec9d1e66a BUG: 1140162 Reviewed-on: http://review.gluster.org/8688 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* glusterd: Move brick order check from cli to glusterd.ggarg2014-09-241-0/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | Previously the brick order check for replicate volumes on volume create and add-brick was done by the cli. This check would fail when a hostname wasn't resolvable and would question the user if it was ok to continue. If the user continued, glusterd would fail the command again as the hostname wouldn't be resolvable. This was unnecessary. This change, moves the check from cli into glusterd. The check is now performed during staging of volume create after the bricks have been resolved. This prevents the above condition from occurring. As a result of this change, the user will no longer be questioned and given an option to continue the operation when a bad brick order is given or the brick order check fails. In such a case, the user can use 'force' to bypass the check and allow the command to succeed. Change-Id: I009861efaf3fb7f553a9b00116a992f031f652cb BUG: 1091935 Signed-off-by: ggarg <ggarg@redhat.com> Reviewed-on: http://review.gluster.org/7589 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* test : Fix for spurious failureSachin Pandit2014-09-231-6/+2
| | | | | | | | | | | | | | | | | | Problem : Once the features.uss is enabled it does not wait for the process to be created. And if we try to check for the pid of the snapd then it will not be present which causes a failure. Solution : Adding a EXPECT_WITHIN which waits to get the pid until certain time period. Change-Id: If075860173a996f9eee13b346e939686b94ec3f6 BUG: 1145450 Signed-off-by: Sachin Pandit <spandit@redhat.com> Reviewed-on: http://review.gluster.org/8814 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: Authenticate management handshake requestsKaushal M2014-09-231-0/+50
| | | | | | | | | | | | | | | | | | | Management handshake requests, which are used to validate op-version supported by the peers, are now only allowed if, - the glusterd doesn't have any other peer, or - the request was sent by another peer. This prevents the op-version of a peer being changed because of a connection attempt by an invalid peer. Change-Id: I248c386ed5ec4f8360e7b5e7f9ab74b7e8a7fc65 BUG: 1109741 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/8126 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* cluster/afr: Set all the xattrs needed by index xlatorAnuradha2014-09-161-0/+58
| | | | | | | | | | | | | | | | | | | | | | Index xlator removes the index file from indices xattrop directory in case the value for keys sent are zero. If all the required keys are not set by afr then index file might be removed in an invalid way. With this change all the keys required by index xlator are set by afr such that invalid removal of files does not occur. Change-Id: Idbed0764a95157fd5cab8d6685057a43788fc7df BUG: 1139230 Signed-off-by: Anuradha <atalur@redhat.com> Reviewed-on: http://review.gluster.org/8652 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* cluster/afr: Handle EAGAIN properly in inodelkPranith Kumar K2014-09-151-1/+0
| | | | | | | | | | | | | | | | | | Problem: When one of the brick is taken down and brough back up in a replica pair, locks on that brick will be allowed. Afr returns inodelk success even when one of the bricks already has the lock taken. Fix: If any brick returns EAGAIN return failure to parent xlator. Change-Id: I5b842d0fc094359cc4231494053d2bfeb606bbbe BUG: 1141539 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/8710 Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/afr: perform list-xattr during lookupRavishankar N2014-09-052-1/+51
| | | | | | | | | | | | | Detect and heal mismatching user extended attributes during lookup. 'Forward' port of http://review.gluster.org/#/c/7444/ Change-Id: Id03c9746f083ffd3014711d0b3a2e5a71a45eed4 BUG: 1134691 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/8558 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* porting: Provide setfattr/getfattr implementationHarshavardhana2014-09-057-18/+18
| | | | | | | | | | | | | | | | - Use 'getfattr' properly avoid redundant options during xattr query - Untabify certain parts of tests (remove tabs) - Avoid backtick evaluation for certain values to make code more portable. - Use awk on FreeBSD/Darwin, since 'wc' implementation is broken and adds spurious spaces in its output. Change-Id: I7dcc0b70874e43b4cda8c306ed18a31b7a3f990a BUG: 1131713 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/8520 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Emmanuel Dreyfus <manu@netbsd.org> Tested-by: Emmanuel Dreyfus <manu@netbsd.org>
* cluster/afr : Mark pending changelog xattrs for new creationsAnuradha2014-09-031-0/+60
| | | | | | | | | | | | | Based on type of file, set appropriate pending changelogs for new entries. Change-Id: Ifd124bf9bc54b996ce83ab9f39d03b3ccca7eb3c BUG: 1130892 Signed-off-by: Anuradha <atalur@redhat.com> Reviewed-on: http://review.gluster.org/8555 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* cluster/dht: Modified test case to note rename failures as errorsShyam2014-09-021-13/+7
| | | | | | | | | | | | | | | | | | | | | | | | | The bug referenced in this change, had an race condition that is now fixed by the following commits that are posted for review. http://review.gluster.org/#/c/8563/ http://review.gluster.org/#/c/8570/ These changes would now make the winning client not fail a rename, in case it failed to rename the linkto file. Hence when one client wins the link race, and the other still deletes the linkto file, the rename failure by the winning client is not a critical failure, hence it resolves the issue posted in the bug. As a result modifying the test case to treat the rename failures as errors, to catch any future issues. Change-Id: Ibe9caac7ee87dcbc4f581cfbd36173b734859ccb BUG: 1123950 Signed-off-by: Shyam <srangana@redhat.com> Reviewed-on: http://review.gluster.org/8579 Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* storage/posix: Prefer gfid links for inode-handlePranith Kumar K2014-09-022-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: File path could change by other entry operations in-flight so if renames are in progress at the time of other operations like open, it may lead to failures. We observed that this issue can also happen while renames and readdirps/lookups are in progress because dentry-table is going stale sometimes. Fix: Prefer gfid-handles over paths for files. For directory handles prefering gfid-handles hits performance issues because it needs to resolve paths traversing up the symlinks. Tests which test if files are opened should check on gfid path after this change. So changed couple of tests to reflect the same. Note: This patch doesn't fix the issue for directories. I think a complete fix is to come up with an entry operation serialization xlator. Until then lets live with this. Change-Id: I10bda1083036d013f3a12588db7a71039d9da6c3 BUG: 1136159 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/8575 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* porting: `pidof` portability for OSX/FreeBSDHarshavardhana2014-08-263-4/+4
| | | | | | | | | | | | | | | | | | | | - Provide a portable `pidof` just to be used specifically with glusterfs regression tests on OSX and FreeBSD. This was written after countless hrs of effort to get a sane `pidof` working on either of the environments. `pidof` comes at the wake of lack of proper procfs support and also incompatible way of handling process names since glusterd/glusterfs are symbolic links to 'glusterfsd' - tests/utils/* directory should be part of 'PATH' to avoid abspath calculation using $(dirname) - cleanup() - rpcinfo command prints error on FreeBSD/OSX fix it Change-Id: I35f86273624cb279da1c8fae056ca27669e251d8 BUG: 1131713 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/8499 Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* cli/glusterd: Support of volume get for a specific volume optionAtin Mukherjee2014-08-261-0/+25
| | | | | | | | | | | | | | This patch introduces a cli command to display a specific volume option/all volume options of a specific volume with the following usage: Usage: volume get <VOLNAME> <key|all> Change-Id: Ic88edb33c5509d7a37cd5ade6341e45e3cdbf59d BUG: 983317 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/8305 Reviewed-by: Kaushal M <kaushal@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* tests: bug-1002207.t - should mount glusterfs before testsHarshavardhana2014-08-261-3/+2
| | | | | | | | | Change-Id: I9238ea8cf4e5ad9bab384ef08d873a5b0e578a33 BUG: 1133266 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/8519 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* cli: Fixing ambiguous message error for rebalance <volname> start commandggarg2014-08-252-3/+26
| | | | | | | | | | | | | | | | | | | Previously output message of command 'gluster volume rebalance <volname> start/start force/fix-layout start' was ambiguous and poorly formatted. Previously output message was: "volume rebalance: <volname>: success: Starting rebalance on volume <volname> has been successful." Now with this fix properly formatted output message is: "volume rebalance: <volname>: success: Rebalance on <volname> has been started Successfully. Use rebalance status command to check status of the rebalance process." Change-Id: I23268fc13b05d1b39ffe4c702d0e4f73085acd1c BUG: 1087487 Signed-off-by: ggarg <ggarg@redhat.com> Reviewed-on: http://review.gluster.org/7473 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* mount/fuse: Handle fd resolution failuresPranith Kumar K2014-08-252-0/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: Even when the fd resolution failed, the fop is continuing on the new graph which may not have valid inode. This lead to NULL layout subvols in dht which lead to crash in fsync after graph migration. Fix: - Remove resolution error handling in FUSE_FOP as it was only added to handle fd migration failures. - check in fuse_resolve_done for fd resolution failures and fail the fop right away. - loc resolution failures are already handled in the corresponding fops. - Return errno from state->resolve.op_errno in resume functions. - Send error to fuse on frame allocation failures. - Removed unused variable state->resolved - Removed unused macro FUSE_FOP_COOKIE Change-Id: I479d6e1ff2ca626ad8c8fcb6f293022149474992 BUG: 1126048 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/8402 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/afr: Set pending changelog based on filetype for new entriesPranith Kumar K2014-08-211-0/+28
| | | | | | | | | Change-Id: Ib6eea2dfe43aacf1f3446cc023adecbcf8645d48 BUG: 1132102 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/8506 Reviewed-by: Anuradha Talur <atalur@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* Regression test portability: mktempEmmanuel Dreyfus2014-08-201-1/+1
| | | | | | | | | | | | | | Linux mktemp accepts to run without a template, NetBSD mandates it. Since the template option has the same syntax, add it everywhere. While there, also do this in scripts outside of regression testing. BUG: 764655 Change-Id: I3ec140afbc9009257c81a56d77afcc21fef74cc4 Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/8432 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Harshavardhana <harsha@harshavardhana.net> Tested-by: Harshavardhana <harsha@harshavardhana.net>
generated by cgit (git 2.34.1) at 2024-05-21 22:46:57 +0000