summaryrefslogtreecommitdiffstats
path: root/tests/basic
Commit message (Collapse)AuthorAgeFilesLines
* cluster/dht: Make rebalance throttle option tuned by numberSusant Palai2017-04-291-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current rebalance throttle options: lazy/normal/aggressive may not always be sufficient for the purpose of throttling. In our recent test, we observed for certain setups, normal and aggressive modes behaved similarly consuming full disk bandwidth. So in cases like this admin should be able to tune it down(or vice versa) depending on the need. Along with old throttle configurations, thread counts are tuned based on number. e.g. gluster v set vol-name cluster-rebal.throttle 5. Admin can tune up/down between 0 and the number of cores available. Note: For heterogenous servers, validation will fail on the old server if "number" is given for throttle configuration. The message looks something like this: "volume set: failed: Staging failed on vm2. Error: cluster.rebal-throttle should be {lazy|normal|aggressive}" Test: Manual test by logging active thread number after reconfiguring throttle option. testcase: tests/basic/distribute/throttle-rebal.t Change-Id: I46e3cde546900307831028b344ecf601fd9b02c3 BUG: 1438370 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: https://review.gluster.org/16980 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* libglusterfs: accept random volname in glusterfs_graph_prepare()Niels de Vos2017-04-264-1/+108
| | | | | | | | | | | | | | | | | | When the call to glfs_new("volname") passes a name for the volume and it does not match the name of the subvolume in the graph, glfs_init() will fail. This is easily reproducible by a gfapi program that loads the volume from a .vol file, and not from a GlusterD server. Change-Id: I33e77fbee7d12eaefe7c384fad6aecfa3582ea5a BUG: 1425623 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: https://review.gluster.org/16796 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Prashanth Pai <ppai@redhat.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* debug/sink: add xlator to aid in resource leak debuggingNiels de Vos2017-04-252-0/+37
| | | | | | | | | | | | | | | | | | | | | | This new xlator does not allocate any resources on init(). This makes it a good option to use for debugging xlator releated resources leaks on fini(). By putting the sink xlator as single xlator in a .vol file, and loading it through gfapi, we can investigate the resource leaks that are happening through gfapi (and the Gluster core). By extending the .vol file with additional xlators, it is possible to analyze resource leaks of single xlators. Change-Id: Idb5faa861b623dd5b2a988b181e669b0d52c2a0e BUG: 1425623 Fixes: #176 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: https://review.gluster.org/16806 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* cluster/afr: GFID split brain resolution with favorite-child-policykarthik-us2017-04-201-0/+228
| | | | | | | | | | | | | | | | | | | | | | | | | Problem: Currently the automatic split brain resolution with favorite child policy is not resolving the GFID split brains. Fix: When there is a GFID split brain and the favorite child policy is set to size/mtime/ctime/majority, based on the policy decide on the source and sinks. Delete the entry from the sinks and recreate it from the source. Mark the appropriate pending attributes and resolve the GFID split brain. When the heal takes place it will complete the pending heals and reset the attributes. Change-Id: Ie30e5373f94ca6f276745d9c3ad662b8acca6946 BUG: 1430719 Signed-off-by: karthik-us <ksubrahm@redhat.com> Reviewed-on: https://review.gluster.org/16878 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Ravishankar N <ravishankar@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* Implement negative lookup cachePoornima G2017-04-201-0/+64
| | | | | | | | | | | | | | | | | | | | | Before creating any file negative lookups(1 in Fuse, 4 in SMB etc.) are sent to verify if the file already exists. By serving these lookups from the cache when possible, increases the create performance by multiple folds in SMB access and some percentage in Fuse/NFS access. Feature page: https://review.gluster.org/#/c/16436 Updates #82 Change-Id: Ib1c0e7ac7a386f943d84f6398c27f9a03665b2a4 BUG: 1442569 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: https://review.gluster.org/16952 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* geo-rep: filter out xtime attribute during getxattrSaravanakumar Arumugam2017-04-111-10/+7
| | | | | | | | | | | | | | | | | | | | | | georep gsyncd's xtime needs to filtered irrespective of any process access. This way, we can avoid (unnecessarily)syncing xtime attribute to slave, which may raise permission denied errors. test case modified to check for xtime xattr only in backend. Change-Id: I2390b703048d5cc747d91fa2ae884dc55de58669 BUG: 1353952 Signed-off-by: Saravanakumar Arumugam <sarumuga@redhat.com> Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: https://review.gluster.org/14880 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kotresh HR <khiremat@redhat.com> Tested-by: Kotresh HR <khiremat@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* TIER/TESTS: improving regression test for tierhari gowtham2017-04-106-78/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The test files that were marked as bad test were checked and updated for centos. The tests that had issue were fixed. Tests that aren't needed anymore are removed. REASON: tests/basic/tier/tier-file-create.t This test checks one line after creating a tiered volume (which is done in every tier test). So this line is moved along with other test in tier and the file is deleted. tests/bugs/tier/bug-1286974.t This bug checks for the tier as a task and tier has been moved from a task to service as a part of the tier as a service patch https://review.gluster.org/#/c/13365/ So it is removed from bad tests. tests/basic/tier/record-metadata-heat.t This test had a bug and has been fixed. tests/basic/tier/bug-1214222-directories_missing_after_attach_tier.t tests/basic/tier/fops-during-migration.t tests/basic/tier/tier-snapshot.t tests/basic/tier/tier_lookup_heal.t These test seem to work fine on centos now. Change-Id: I05537f4bbb91584410177ce43543897eff8761a1 BUG: 1421600 Signed-off-by: hari gowtham <hgowtham@redhat.com> Reviewed-on: https://review.gluster.org/16605 Smoke: Gluster Build System <jenkins@build.gluster.org> Tested-by: hari gowtham <hari.gowtham005@gmail.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra Talur <rtalur@redhat.com>
* TIER: watermark check during low watermark resethari gowtham2017-03-181-0/+6
| | | | | | | | | | | | | | | | | | | PROBLEM: during a low watermark reset, checking of whether the low watermark is lower than hi watermark is not done. FIX: This patch checks if the hi watermark value is higher the default low watermark. Else throws an failure of the reset command Change-Id: I8b49090c6bccce6d45c2e8076ab766047a2a6162 BUG: 1328342 Signed-off-by: hari gowtham <hgowtham@redhat.com> Reviewed-on: https://review.gluster.org/14028 Smoke: Gluster Build System <jenkins@build.gluster.org> Tested-by: hari gowtham <hari.gowtham005@gmail.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd: disallow increasing replica count for arbiter volumesRavishankar N2017-03-061-0/+6
| | | | | | | | | | | | | | | | | | | | | Problem: add-brick command to increase replica count in an arbiter volume succeeds, causing undesirable effects like the 4th brick being loaded with the arbiter xlator, the 3rd one losing the arbiter xlator (when the brick process is restarted), arbitration logic in afr going for a toss etc. Fix: Arbiter configuration should always be a replica 3 volume (of which 3rd brick is arbiter). Hence disallow increasing replica count for arbiter volume configurations. Change-Id: I9fe4edac880d0f711e6d44324ad5562974e53e51 BUG: 1429200 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: https://review.gluster.org/16845 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* cluster/ec: Introduce optimistic changelog in ECPranith Kumar K2017-03-041-0/+152
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: Fix to https://bugzilla.redhat.com/show_bug.cgi?id=1316873 has made changes to set dirty flag before every update fop, data or metadata, and unset it after successful operation. That makes some of the fops very slow such as entry operations or metadata operations. Solution: File data operations are the only operation which take some time and setting dirty flag before a fop and unsetting it after serves the purpose as probability of failure of a fop is high when the time duration is more. For all the other operations, set dirty flag at the end of the fop, if any brick is down and need heal. Providing following option to choose between high performance or better heal marking for metadata and entry fops. Set/Unset dirty flag for every update fop at the start of the fop. If ON, this option impacts performance of entry operations or metadata operations as it will set dirty flag at the start and unset it at the end of ALL update fop. If OFF and all the bricks are good, dirty flag will be set at the start only for file fops For metadata and entry fops dirty flag will not be set at the start, if all the bricks are good. This does not impact performance for metadata operations and entry operation but has a very small window to miss marking entry as dirty in case it is required to be healed. Thanks to Xavi and Ashish for the design Picked the .t file from Ashish' patch https://review.gluster.org/16298 BUG: 1408809 Change-Id: I3ce860063f0e2901e50754dcfc3e4ed22daf819f Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: https://review.gluster.org/16821 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Xavier Hernandez <xhernandez@datalab.es> Tested-by: Xavier Hernandez <xhernandez@datalab.es> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* tests: Fix and enable split-brain-healing mtime checkNiklas Hambüchen2017-03-011-6/+36
| | | | | | | | | | | | | | | | | | | | | This test was commented out with the belief that it depended on utimensat() support, but in fact it was not necessary because `stat -c %Y` only outputs second resolution. Simply commenting in the test made it fail because it checked the values *before* the heal, while intended was to check them *after* the heal. This commit fixes that. Change-Id: I4194ac645b365a1f906a3ac9bcbbdb1f05000e27 BUG: 1422074 Signed-off-by: Niklas Hambüchen <mail@nh2.me> Reviewed-on: https://review.gluster.org/16789 Reviewed-by: Ravishankar N <ravishankar@redhat.com> Tested-by: Ravishankar N <ravishankar@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niklas Hambüchen
* cluster/ec: Don't trigger data/metadata heal on LookupsPranith Kumar K2017-02-263-10/+86
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem-1 If Lookup which doesn't take any locks observes version mismatch it can't be trusted. If we launch a heal based on this information it will lead to self-heals which will affect I/O performance in the cases where Lookup is wrong. Considering self-heal-daemon and operations on the inode from client which take locks can still trigger heal we can choose to not attempt a heal on Lookup. Problem-2: Fixed spurious failure of tests/bitrot/bug-1373520.t For the issues above, what was happening was that ec_heal_inspect() is preventing 'name' heal to happen Problem-3: tests/basic/ec/ec-background-heals.t To be honest I don't know what the problem was, while fixing the 2 problems above, I made some changes to ec_heal_inspect() and ec_need_heal() after which when I tried to recreate the spurious failure it just didn't happen even after a long time. BUG: 1414287 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Change-Id: Ife2535e1d0b267712973673f6d474e288f3c6834 Reviewed-on: https://review.gluster.org/16468 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Xavier Hernandez <xhernandez@datalab.es> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Ashish Pandey <aspandey@redhat.com>
* tests: Added check for NFS export availability to quota-anon-fd-nfs.tShyam2017-02-221-0/+1
| | | | | | | | | | | Change-Id: I15a9441267c18bb1073d14db325c98fa497f2fb7 BUG: 1425515 Signed-off-by: Shyam <srangana@redhat.com> Reviewed-on: https://review.gluster.org/16701 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: sanoj-unnikrishnan <sunnikri@redhat.com>
* trash: fix problem with trash feature under multiplexingJeff Darcy2017-02-091-1/+3
| | | | | | | | | | | | | | | | | | With multiplexing, the trash translator gets a reconfigure call before a notify(CHILD_UP). In this case, priv->trash_itable was not yet initialized, so the reconfigure would get a SEGV. Moving the itable allocation to init seems to fix it, so trash can be reenabled. Change-Id: I21ac2d7fc66bac1bc4ec70fbc8bae306d73ac565 BUG: 1420434 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: https://review.gluster.org/16567 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Anoop C S <anoopcs@redhat.com> Reviewed-by: jiffin tony Thottan <jthottan@redhat.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* tests: fix online_brick_count for multiplexingJeff Darcy2017-02-071-7/+11
| | | | | | | | | | | | | | | | | | The number of brick processes no longer matches the number of bricks, therefore counting processes doesn't work. Counting *pidfiles* does. Ironically, the fix broke multiplex.t which used this function, so it now uses a different function with the old process-counting behavior. Also had to fix online_brick_count and kill_node in cluster.rc to be consistent with the new reality. Change-Id: I4e81a6633b93227e10604f53e18a0b802c75cbcc BUG: 1385758 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: https://review.gluster.org/16527 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* CLI/TIER: removing old tier commands under rebalancehari gowtham2017-02-071-1/+16
| | | | | | | | | | | | | | | | | | | | PROBLEM: gluster v rebalance <volname> tier start works even after the switch of tier to service framework. This lets the user have two tierd for the same volume. FIX: checking for each process will make the new code hard to maintain. So we are removing the support for old commands. Change-Id: I5b0974b2dbb74f0bee8344b61c7f924300ad73f2 BUG: 1415590 Signed-off-by: hari gowtham <hgowtham@redhat.com> Reviewed-on: https://review.gluster.org/16463 Smoke: Gluster Build System <jenkins@build.gluster.org> Tested-by: hari gowtham <hari.gowtham005@gmail.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: N Balachandran <nbalacha@redhat.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* extras: Provide group set for md-cache and invalidation optionsPoornima G2017-02-031-0/+20
| | | | | | | | | | | | | | | | | | To enable the integration of md-cache and invalidation features we need to perform 3 volume set options in a specific order. In order to ease this for user provide a group volume set option. Usage: gluster vol set <VOLNAME> group metadata-cache Change-Id: I9bf0fd4217aa2a1c7ffbdc93e879b10f87addeac BUG: 1418249 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: https://review.gluster.org/16503 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* libglusterfs: make memory pools more thread-friendlyJeff Darcy2017-02-021-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Early multiplexing tests revealed *massive* contention on certain pools' global locks - especially for dictionaries and secondarily for call stubs. For the thread counts that multiplexing can create, a more lock-free solution is clearly needed. Also, the current mem-pool implementation does a poor job releasing memory back to the system, artificially inflating memory usage to match whatever the worst case was since the process started. This is bad in general, but especially so for multiplexing where there are more pools and a major point of the whole exercise is to reduce memory consumption. The basic ideas for the new design are these There is one pool, globally, for each power-of-two size range. Every attempt to create a new pool within this range will instead add a reference to the existing pool. Instead of adding pools for each translator within each multiplexed brick (potentially infinite and quite possibly thousands), we allocate one set of size-based pools per *thread* (hundreds at worst). Each per-thread pool is divided into hot and cold lists. Every allocation first attempts to use the hot list, then the cold list. When objects are freed, they always go on the hot list. There is one global "pool sweeper" thread, which periodically reclaims everything in each pool's cold list and then "demotes" the current hot list to be the new cold list. For normal allocation activity, only a per-thread lock need be taken, and even that only to guard against very rare contention from the pool sweeper. When threads start and stop, a global lock must be taken to add them to the pool sweeper's list. Lock contention is therefore extremely low, and the hot/cold lists also provide good locality. A more complete explanation (of a similar earlier design) can be found here: http://www.gluster.org/pipermail/gluster-devel/2016-October/051160.html Change-Id: I5bc8a1ba57cfb553998f979a498886e0d006e665 BUG: 1385758 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: https://review.gluster.org/15645 Reviewed-by: Xavier Hernandez <xhernandez@datalab.es> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* core: run many bricks within one glusterfsd processJeff Darcy2017-01-3031-38/+218
| | | | | | | | | | | | | | | | | | | | | | | This patch adds support for multiple brick translator stacks running in a single brick server process. This reduces our per-brick memory usage by approximately 3x, and our appetite for TCP ports even more. It also creates potential to avoid process/thread thrashing, and to improve QoS by scheduling more carefully across the bricks, but realizing that potential will require further work. Multiplexing is controlled by the "cluster.brick-multiplex" global option. By default it's off, and bricks are started in separate processes as before. If multiplexing is enabled, then *compatible* bricks (mostly those with the same transport options) will be started in the same process. Change-Id: I45059454e51d6f4cbb29a4953359c09a408695cb BUG: 1385758 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: https://review.gluster.org/14763 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/ec: mark ec-background-heal.t as badXavier Hernandez2017-01-261-0/+2
| | | | | | | | | | | Change-Id: I0c54c62cdeb40b983da2392296762471a5474652 BUG: 1416689 Signed-off-by: Xavier Hernandez <xhernandez@datalab.es> Reviewed-on: https://review.gluster.org/16470 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* md-cache: Cache security.ima xattrsPoornima G2017-01-201-0/+34
| | | | | | | | | | | | | | | | From kernel version 3.X or greater, creating of a file results in removexattr call on security.ima xattr. But this xattr is not set on the file unless IMA feature is active. With this patch, removxattr call returns ENODATA if it is not found in the cache. Change-Id: I8136096598a983aebc09901945eba1db1b2f93c9 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/16296 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* gfapi: add API to trigger events for debugging and troubleshootingNiels de Vos2017-01-192-0/+100
| | | | | | | | | | | | | | | | | | | | | | | | | | Introduce glfs_sysrq() as a generic API for triggering debug and troubleshoot events. This interface will be used by the feature to get statedumps for applications using libgfapi. The current events that can be requested through this API are: - 'h'elp: log a mesage with all supported events - 's'tatedump: trigger a statedump for the passed glfs_t In future, this API can be used by a CLI to trigger statedumps from storage servers. At the moment it is limited to take statedumps, but it is extensible to set the log-level, clear caches, force reconnects and much more. BUG: 1169302 Change-Id: I18858359a3957870cea5139c79efe1365a15a992 Original-author: Poornima G <pgurusid@redhat.com> Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/16414 Reviewed-by: Prashanth Pai <ppai@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* tier : Tier as a servicehari gowtham2017-01-164-5/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | tierd is implemented by separating from rebalance process. The commands affected: 1) Attach tier will trigger this process instead of old one 2) tier start and tier start force will also trigger this process. 3) volume status [tier] will show tier daemon as a process instead of task and normal tier status and tier detach status works. 4) tier stop implemented. 5) detach tier implemented separately along with new detach tier status 6) volume tier volname status will work using the changes. 7) volume set works This patch has separated the tier translator from the legacy DHT rebalance code. It now sends the RPCs from the CLI to glusterd separate to the DHT rebalance code. The daemon is now a service, similar to the snapshot daemon, and can be viewed using the volume status command. The code for the validation and commit phase are the same as the earlier tier validation code in DHT rebalance. The “brickop” phase has been changed so that the status command can use this framework. The service management framework is now used. DHT rebalance does not use this framework. This service framework takes care of : *) spawning the daemon, killing it and other such processes. *) volume set options , which are written on the volfile. *) restart and reconfigure functions. Restart is to restart the daemon at two points 1)after gluster goes down and comes up. 2) to stop detach tier. *) reconfigure is used to make immediate volfile changes. By doing this, we don’t restart the daemon. it has the code to rewrite the volfile for topological changes too (which comes into place during add and remove brick). With this patch the log, pid, and volfile are separated and put into respective directories. Change-Id: I3681d0d66894714b55aa02ca2a30ac000362a399 BUG: 1313838 Signed-off-by: hari gowtham <hgowtham@redhat.com> Reviewed-on: http://review.gluster.org/13365 Smoke: Gluster Build System <jenkins@build.gluster.org> Tested-by: hari gowtham <hari.gowtham005@gmail.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* readdir-ahead : Perform STACK_UNWIND outside of mutex locksPoornima G2017-01-091-0/+0
| | | | | | | | | | | | | | | | | | Currently STACK_UNWIND is performnd within ctx->lock. If readdir-ahead is loaded as a child of dht, then there can be scenarios where the function calling STACK_UNWIND becomes re-entrant. Its a good practice to not call STACK_WIND/UNWIND within local mutex's Change-Id: If4e869849d99ce233014a8aad7c4d5eef8dc2e98 BUG: 1401812 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/16068 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* tests: Remove rpm testNigel Babu2017-01-061-145/+0
| | | | | | | | | | | | | | | This is already tested by our smoke test. Testing it again is redundant. Change-Id: Icae4e8650002cd847dcb7ea76fd0447df7e72816 BUG: 1408755 Signed-off-by: Nigel Babu <nigelb@redhat.com> Reviewed-on: http://review.gluster.org/16287 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Anoop C S <anoopcs@redhat.com> Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* glusterd: Fail add-brick on replica count change, if brick is downkarthik-us2017-01-061-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: 1. Have a replica 2 volume with bricks b1 and b2 2. Before setting the layout, b1 goes down 3. Set the layout write some data, which gets populated on b2 4. b2 goes down then b1 comes up 5. Add another brick b3, and heal will take place from b1 to b3, which basically have no data 6. Write some data. Both b1 and b3 will mark b2 for pending writes 7. b1 goes down, and b2 comes up 8. b2 gets heald from b1. During heal it removes the data which is already in b2, considering that as stale data. This leads to data loss. Solution: 1. In glusterd stage-op, while adding bricks, check whether the replica count is being increased 2. If yes, then check whether any of the bricks are down at that time 3. If yes, then fail the add-brick to avoid such data loss 4. Else continue the normal operation. This check will work enen when we convert plain distribute volume to replicate Test: 1. Create a replica 2 volume 2. Kill one brick from the volume 3. Try adding a brick to the volume 4. It should fail with all bricks are not up error 5. Cretae a distribute volume and kill one of the brick 6. Try to convert it to replicate volume, by adding bricks. 7. This should also fail. Change-Id: I9c8d2ab104263e4206814c94c19212ab914ed07c BUG: 1406411 Signed-off-by: karthik-us <ksubrahm@redhat.com> Reviewed-on: http://review.gluster.org/16330 Tested-by: Ravishankar N <ravishankar@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: N Balachandran <nbalacha@redhat.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* tests: Fix split-brain-favorite-child-policy.t failuresRavishankar N2017-01-021-4/+14
| | | | | | | | | | | | | | | | | | | | | | | | | Problem: In CentOS-7, the file was receving an extra removexattr(security.ima) FOP which changed its ctime, breaking the assumption that a particular brick had the latest ctime based on the writevs done in the .t Fix: 1. Compare the ctime of both files in the backend and pick the one with the latest ctime for the fav-child policy. Also unmount the volume before comparing, to avoid any further FOPS on the file that can possibly modify the timestamps. 2. Added floating point handling in stat function. Thanks to Pranith for the helping debugging the regex. Change-Id: I06041a0f39a29d2593b867af8685d65c7cd99150 BUG: 1408757 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/16288 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* Repair EC tests for FB environment (/mnt/gvfs is teh sux00r)Kevin Vigor2016-12-292-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Summary: Don't blindly 'df', target the volume in question. (this is because FB build environment has a /mnt/gvfs which fails df). Test Plan: runtests.sh Reviewers: Subscribers: Tasks: Blame Revision: Change-Id: Ic2c5883dd102835db64be9594657257e20711ba0 BUG: 1406878 Signed-off-by: Kevin Vigor <kvigor@fb.com> Reviewed-on-3.8-fb: http://review.gluster.org/16182 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Tested-by: Shreyas Siravara <sshreyas@fb.com> Reviewed-by: Shreyas Siravara <sshreyas@fb.com> Reviewed-on: http://review.gluster.org/16226 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* tests: Move tests/basic/gfapi/bug1291259.t to bad tests listKrutika Dhananjay2016-12-191-0/+2
| | | | | | | | | | | | | | | See thread http://www.gluster.org/pipermail/gluster-devel/2016-December/051714.html for more information. Change-Id: I9abe4b0e40499e53c1276a10a6bc192fd0f2cef7 BUG: 1405301 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/16159 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra Talur <rtalur@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* glfsheal: Explicitly enable self-heal xlator optionsRavishankar N2016-12-151-0/+3
| | | | | | | | | | | | | | | | Enable data, metadata and entry self-heal as xlator-options so that glfs-heal.c can heal split-brain files even if they are disabled on the volume via volume set commands. Change-Id: Ic191a1017131db1ded94d97c932079d7bfd79457 BUG: 1234054 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/11333 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* cluster/afr: CLI for granular entry heal enablement/disablementKrutika Dhananjay2016-11-286-7/+149
| | | | | | | | | | | | | | | | | | | | | | | | | | | | When there are already existing non-granular indices created that are yet to be healed, if granular-entry-heal option is toggled from 'off' to 'on', AFR self-heal whenever it kicks in, will try to look for granular indices in 'entry-changes'. Because of the absence of name indices, granular entry healing logic will fail to heal these directories, and worse yet unset pending extended attributes with the assumption that are no entries that need heal. To get around this, a new CLI is introduced which will invoke glfsheal program to figure whether at the time an attempt is made to enable granular entry heal, there are pending heals on the volume OR there are one or more bricks that are down. If either of them is true, the command will be failed with the appropriate error. New CLI: gluster volume heal <VOL> granular-entry-heal {enable,disable} Change-Id: I1f4fe8162813b9068e198965d94169fee4adc099 BUG: 1370410 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/15747 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* cluster/afr: Fix bugs in [f]inodelk/[f]entrylkPranith Kumar K2016-11-261-0/+87
| | | | | | | | | | | | | | | | | | | | | | Problems: 1) Inodelk is not taking quorum into account 2) finodelk, [f]entrylk are not implemented correctly 3) By default afr doesn't go for non-blocking parallel locks. Fix: Implemented a common framework which can be used by [f]inodelk/[f]entrylk. Used quorum for the same. Change-Id: I239f13875a065298630d266941df10cfa3addc85 BUG: 1369077 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/15802 Tested-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Ravishankar N <ravishankar@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* features/index: Delete granular entry indices of already healed directories ↵Krutika Dhananjay2016-11-241-0/+76
| | | | | | | | | | | | | | | | | | | | | | during crawl If granular name indices are already in existence for a volume, and before they are healed, granular entry heal be disabled, a crawl on indices/xattrop will clear the changelogs on these directories. When their corresponding entry-changes indices are crawled subsequently, if it is found that the directories don't need heal anymore, the granular indices are not cleaned up. This patch fixes that problem by ensuring that the zero-xattrop also deletes the stale indices at the level of index translator. Change-Id: Ifbaa6bec2a14e3041addfee4054131babbf4d35e BUG: 1370410 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/15880 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* jbr: Sending rollback from failed fop to fdlAvra Sengupta2016-11-081-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In case of a failed fop, the failure is detected by the leader in the jbr-server in two places. First during a quorum check of +ve responses when it receives responses from all the followers. At this point if the fop hasn't been successfully journaled at a quorum of followers (as in there is no merit in trying the fop in the leader as the quorum will never be met), then we fail the fop. Also if this quorum is met, then the fop is tried on the leader, and after the leader completes the fop a quorum check similar to the previous one is done again, this time including the leaders outcome. If quorum is not met, then we fail the fop. In both these cases, when the fop fails we send a -ve ack to the client. With this patch, now we will also send a rollback through a GF_FOP_IPC to all the followers(and also to the leader in the second case of failure). This rollback will contain the index and term number of the fop which failed. This will be recorded in the respective journals of the bricks and will be used to rollback the fop on that brick later. A subsequent write, and it's respective rollback would look something like the following in the journal. The trusted.jbr.term and trusted.jbr.index present in the dict of both the logs, relate them, and the presence of "rollback-fop" in the dict of IPC indicates that it is a rollback fop, and the value 13(stands for GF_FOP_WRITE) indicates what kind of rollback operation it is. === GF_FOP_WRITE fd = <gfid 77f12ea2-ca56-40e3-a46e-ba2308baa035> vector = <158 bytes> offset = 0 (0x0) flags = 32769 (0x8001) xdata = dict { trusted.jbr.term = 0 <2 bytes> trusted.jbr.index = 4 <2 bytes> } === GF_FOP_IPC xdata = dict { trusted.jbr.term = 0 <2 bytes> trusted.jbr.index = 4 <2 bytes> rollback-fop = 13 <3 bytes> } Change-Id: I70b6a143d20697153d58e2f719e34ecd1ed160a5 BUG: 1349385 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/14783 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org>
* gfapi: async fops should unref in callbacksRaghavendra Talur2016-11-052-0/+203
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If fd is unref'd at the end of async call then the unref in cbks would lead to double unref and possible crash. Removing duplicate unrefs. Added unref only in failure cases. A simple test case has been added to test async write case. Need to extend the same for other async APIs too. Details: All glfd based calls in libgfapi, except for glfs_open and glfs_close, behave in the same way. At the start of the operation, they take a ref on glfd and fd. At the end of the operation, they unref it. Async calls are a little different as they unref in the cbk function. A successfull open call does not unref either the glfd or fd, thereby functioning as a reference for a OPEN file object. glfs_close makes a syncop_flush call sandwiched between a fd ref and unref(this can be removed, more on this below), followed by a call to glfs_mark_glfd_for_deletion which unrefs glfd and also calls glfs_fd_destroy as a release function thereby doing a unref on fd too. Functionally, there is no problem with how everything works when as described above. However, it is a little non-intuitive that we need to perform a fd_unref as a consequence of a implicit fd_ref that happens within glfs_resolve_fd. As we perform a GF_REF_GET(glfd) at the start of every operation, it would be worthwhile to remove the fd_ref that glfs_resovle_fd takes and do away with explicit fd_unref()s at the end of every operation. This is the same reason why we don't need the fd_ref in glfs_close. This is however not in the scope of this patch. Change-Id: I86b1d3b2ad846b16ea527d541dc82b5e90b0ba85 BUG: 1391086 Signed-off-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-on: http://review.gluster.org/15768 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Xavier Hernandez <xhernandez@datalab.es> Reviewed-by: soumya k <skoduri@redhat.com> Reviewed-by: Prasanna Kumar Kalever <pkalever@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* snapshot: Fix the failure to recreate clones with same nameAvra Sengupta2016-11-011-0/+13
| | | | | | | | | | | | | | | | | | | The brick path of snapshot clones contained the clonename, thereby failing to create newer clones with the same name after the original clone had been deleted. This fix creates the brick path with the clone's vol id instead of the clones name. Hence future clones with the same name will not have the namespace clash. Change-Id: I262712adc576122f051b5d1ce171d020efaefd1a BUG: 1387160 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/15683 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* afr,ec: Heal device files with correct major, minor numbersPranith Kumar K2016-10-262-11/+23
| | | | | | | | | | | | | | Thanks a lot to xiaoping.wu@nokia.com from Nokia for the bug and the fix. BUG: 1384297 Change-Id: Ie443237e85d34633b5dd30f85eaa2ac34e45754c Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/15728 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Xavier Hernandez <xhernandez@datalab.es> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* compound fops: Fix file corruption issueKrutika Dhananjay2016-10-241-0/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. Address of a local variable @args is copied into state->req in server3_3_compound (). But even after the function has gone out of scope, in server_compound_resume () this pointer is accessed and dereferenced. This patch fixes that. 2. Compound fops, by virtue of NOT having a vector sizer (like the one writev has), ends up having both the header and the data (in case one of its member fops is WRITEV) in the same hdr_iobuf. This buffer was not being preserved through the lifetime of the compound fop, causing it to be overwritten by a parallel write fop, even when the writev associated with the currently executing compound fop is yet to hit the desk, thereby corrupting the file's data. This is fixed by associating the hdr_iobuf with the iobref so its memory remains valid through the lifetime of the fop. 3. Also fixed a use-after-free bug in protocol/client in compound fops cbk, missed by Linux but caught by NetBSD. Finally, big thanks to Pranith Kumar K and Raghavendra Gowdappa for their help in debugging this file corruption issue. Change-Id: I6d5c04f400ecb687c9403a17a12683a96c2bf122 BUG: 1378778 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/15654 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* tests: gfapi/bug1291259.c should only call glfs_free() on successNiels de Vos2016-10-202-4/+4
| | | | | | | | | | | | | | | | | In case glfs_h_poll_upcall() does not return success, the 'struct glfs_upcall' would not have been allocated. A retry will be done and glfs_free() is called on the unallocated structure. In case the pointer does not point to NULL, glfs_free() will try to free up some random area. Change-Id: I38788d3bf22bbac3924f25edf45cd4a2637fa777 BUG: 1371540 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/15603 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: jiffin tony Thottan <jthottan@redhat.com>
* cluster/ec: Implement heal info with lockAshish Pandey2016-10-111-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | Problem: Currently heal info command prints all the files/directories if the index for the file/directory is present in .glusterfs/indices folder. After implementing patch http://review.gluster.org/#/c/13733/ indices of the file which is going through update fop will also be present in .glusterfs/indices even if the fop is successful on all the brick. At this time if heal info command is being used, it will also display this file which is actually healthy and does not require any heal. Solution: Take lock on a file corresponding to the indices and inspect xattrs to decide if the file needs heal or not. Change-Id: I6361e2813ece369be12d02e74816df4eddb81cfa BUG: 1366815 Signed-off-by: Ashish Pandey <aspandey@redhat.com> Reviewed-on: http://review.gluster.org/15543 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Reviewed-by: Xavier Hernandez <xhernandez@datalab.es> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org>
* gfapi: redesign the public interface for upcall consumersNiels de Vos2016-09-285-80/+96
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The glfs_callback_arg and glfs_callback_inode_arg were allocated by gfapi, and expected to be free()'d by the application. However it is not reasonable to expect that applications use the same memory allocator to as the compiled libgfapi.so. For instance, it is possible that gfapi uses glibc malloc/free, and an application like NFS-Ganesha the versions from jemalloc. Mismatching of the malloc() and free() functions causes segmentation faults at best. In order to prevent problems like this in the future, the API for applications that consume upcalls has been remodeled. Any of the structures that gfapi allocates, should be free'd with glfs_free(). The members of the structures can not be accessed directly anymore, each has its own function to access now. Correcting the naming of the functions, structures and constants is a continuation of commit 2775dc64101ed37c8d9809bf9852dbf0746ee2b6. These new improvements not only have correct prefixes for the functions and structures, the naming also reflects more to the upcall framework and does not use "callback" anymore. Change-Id: I2b8bd5a0a82036d2abea1a217f5e5975a1d4fe93 BUG: 1344714 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/14701 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: soumya k <skoduri@redhat.com> Reviewed-by: jiffin tony Thottan <jthottan@redhat.com>
* cluster/ec: set/unset dirty flag for data/metadata updateAshish Pandey2016-09-152-0/+15
| | | | | | | | | | | | | | | | | | | | Currently, for all the update operations, metadata or data, we set the dirty flag at the end of the operation only if a brick is down. This leads to delay in healing and in some cases not at all. In this patch we set (+1) the dirty flag at the start of the metadata or data update operations and after successfull completion of the fop, we unset (-1) it again. Change-Id: Ide5668bdec7b937a61c5c840cdc79a967598e1e9 BUG: 1316873 Signed-off-by: Ashish Pandey <aspandey@redhat.com> Reviewed-on: http://review.gluster.org/13733 Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Xavier Hernandez <xhernandez@datalab.es>
* cluster/ec: Add support for hardware accelerationXavier Hernandez2016-09-081-0/+61
| | | | | | | | | | | | | | | | | | | | | | | This patch implements functionalities for fast encoding/decoding using hardware support. Currently optimized x86_64, SSE and AVX is added. Additionally this patch implements a caching mecanism for inverse matrices to reduce computation time, as well as a new method for computing the inverse that takes quadratic time instead of cubic. Finally some unnecessary memory copies have been eliminated to further increase performance. Change-Id: I26c75f26fb4201bd22b51335448ea4357235065a BUG: 1289922 Signed-off-by: Xavier Hernandez <xhernandez@datalab.es> Reviewed-on: http://review.gluster.org/12837 Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* gfapi: Mark tests/basic/gfapi/bug1291259.t bad until it is fixedPoornima G2016-09-011-0/+2
| | | | | | | | | | | Change-Id: Ia0493ce7e71050b3e8a1a1fed2d861cc141a0f94 BUG: 1371540 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/15353 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra Talur <rtalur@redhat.com>
* tests: Fix spurious failures because of wrong shd up functionPranith Kumar K2016-08-311-1/+1
| | | | | | | | | | | | | | Fixed the way shd up check is done to prevent self-heal daemon not running error when heal full command is executed. Change-Id: I93c4a0da12316373d62cd4ea74432cd9bf2b090c BUG: 1370053 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/15341 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Anuradha Talur <atalur@redhat.com>
* gfapi: SSL connection for mgmt connection is not workingRajesh Joseph2016-08-283-1/+188
| | | | | | | | | | | | | | | | | Problem: libgfapi does not enable SSL on mgmt connection. Fix: Enable SSL when it is enabled on mgmt connection is enabled, i.e. presence of /var/lib/glusterd/secure-access file Change-Id: I1ce4935b04e6140aeab819e42076defd580b0727 BUG: 1362602 Signed-off-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-on: http://review.gluster.org/15073 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* tests: change EXPECT_WITHIN timeoutsAnuradha Talur2016-08-281-8/+8
| | | | | | | | | | | | | | | | | Use defined HEAL and PROCESS_UP timeouts rather than hard code them in self-heald.t. Change-Id: I21586811904c8417b7208bb643f14dff20dc4832 BUG: 1370074 Signed-off-by: Anuradha Talur <atalur@redhat.com> Reviewed-on: http://review.gluster.org/15316 Reviewed-by: Ravishankar N <ravishankar@redhat.com> Tested-by: Ravishankar N <ravishankar@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* gfapi: do not cache upcalls if the application is not interestedNiels de Vos2016-08-252-4/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the volume option 'features.cache-invalidation' is enabled, upcall events are sent from the brick process to the client. Even if the client is not interested in upcall events itself, md-cache or other xlators may benefit from them. By adding a new 'cache_upcalls' boolean in the 'struct glfs', we can enable the caching of upcalls when the application called glfs_h_poll_upcall(). NFS-Ganesha sets up a thread for handling upcalls in the initialization phase, and calls glfs_h_poll_upcall() before any NFS-client accesses the NFS-export. In the future there will be a more flexible registration API for enabling certain kind of upcall events. Until that is available, this should work just fine. Verificatio of this change is not trivial within our current regression test framework. The bug report contains a description on how to reliably reproduce the problem with the glusterfs-coreutils. Change-Id: I818595c92db50e6e48f7bfe287ee05103a4a30a2 BUG: 1368842 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/15191 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Poornima G <pgurusid@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: soumya k <skoduri@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* snapshot/cli: Fix snapshot status xml outputAvra Sengupta2016-08-231-0/+76
| | | | | | | | | | | | | | | | | | | | | | | | snap status --xml errors out if a brick is down and doesn't have pid. It is handled in the cli of the snap status where "N/A" is displayed in such a scenario. Handled the same in xml snap status <snapname> --xml fails as the writer is not initialised for the same. Using GF_SNAP_STATUS_TYPE_ITER instead of GF_SNAP_STATUS_TYPE_SNAP for all snap's status to differentiate between the two scenarios. Added testcase volume-snapshot-xml.t to check all snapshot commands xml outputs Change-Id: I99563e8f3e84f1aaeabd865326bb825c44f5c745 BUG: 1325831 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/14018 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* snapshot: Display number of snapshots in volume infoAvra Sengupta2016-08-231-0/+20
| | | | | | | | | | | | | | | Display number of snapshots in a volume in volume info output. This number gets modified, with create, delete, and restore operations. Change-Id: Ic9b7c2b6950980f8ce75ca362998c097ea7c863d BUG: 1360693 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/15029 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
generated by cgit (git 2.34.1) at 2024-05-21 23:11:01 +0000