summaryrefslogtreecommitdiffstats
path: root/tests/basic
Commit message (Collapse)AuthorAgeFilesLines
* core: implement a global thread poolXavi Hernandez2019-02-181-0/+104
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements a thread pool that is wait-free for adding jobs to the queue and uses a very small locked region to get jobs. This makes it possible to decrease contention drastically. It's based on wfcqueue structure provided by urcu library. It automatically enables more threads when load demands it, and stops them when not needed. There's a maximum number of threads that can be used. This value can be configured. Depending on the workload, the maximum number of threads plays an important role. So it needs to be configured for optimal performance. Currently the thread pool doesn't self adjust the maximum for the workload, so this configuration needs to be changed manually. For this reason, the global thread pool has been made optional, so that volumes can still use the thread pool provided by io-threads. To enable it for bricks, the following option needs to be set: config.global-threading = on This option has no effect if bricks are already running. A restart is required to activate it. It's recommended to also enable the following option when running bricks with the global thread pool: performance.iot-pass-through = on To enable it for a FUSE mount point, the option '--global-threading' must be added to the mount command. To change it, an umount and remount is needed. It's recommended to disable the following option when using global threading on a mount point: performance.client-io-threads = off To enable it for services managed by glusterd, glusterd needs to be started with option '--global-threading'. In this case all daemons, like self-heal, will be using the global thread pool. Currently it can only be enabled for bricks, FUSE mounts and glusterd services. The maximum number of threads for clients and bricks can be configured using the following options: config.client-threads config.brick-threads These options can be applied online and its effect is immediate most of the times. If one of them is set to 0, the maximum number of threads will be calcutated as #cores * 2. Some distributions use a very old userspace-rcu library (version 0.7) for this reason, some header files from version 0.10 have been copied into contrib/userspace-rcu and are used if the detected version is 0.7 or older. An additional change has been made to io-threads to prevent that threads are started when iot-pass-through is set. Change-Id: I09d19e246b9e6d53c6247b29dfca6af6ee00a24b updates: #532 Signed-off-by: Xavi Hernandez <xhernandez@redhat.com>
* Fix compilation for fops-sanity.cPranith Kumar K2019-02-141-0/+1
| | | | | | | | | | | | | | | | Without this patch the following error is seen: .... warning: implicit declaration of function ‘makedev’ [-Wimplicit-function-declaration] ret = mknod("cspecial", S_IFCHR | S_IRWXU | S_IRWXG, makedev(2, 3)); ^~~~~~~ /usr/bin/ld: /tmp/ccIVwT46.o: in function `path_based_fops': /home/pk/workspace/gerrit-repo/tests/basic/fops-sanity.c:478: undefined reference to `makedev' .... updates bz#1676797 Change-Id: I8a17c38fdfd458dd2dc75f4c7e2bf20ce555a042 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com>
* mount/fuse: expose auto-invalidation as a mount optionRaghavendra Gowdappa2019-02-021-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Auto invalidation is necessary when same (meta)data is shared/access across multiple mounts. However, if (meta)data is not shared, all relevant I/O goes through the cache of single mount and hence is coherent with (meta)data on bricks always. So, fuse-auto-invalidation can be disabled for this case which gives a huge performance boost for workloads that write data and then immediately read the data they just wrote. From glusterfs --help, <snip> --auto-invalidation[=BOOL] controls whether fuse-kernel can auto-invalidate attribute, dentry and page-cache. Disable this only if same files/directories are not accessed across two different mounts concurrently [default: "on"] </snip> Details on how disabling auto-invalidation helped to reduce pgbench init times can be found at [1]. Time taken for pgbench init of scale 8000 was 8340s. That will be an improvement of 86% (59280s vs 8340s) with auto-invalidations turned off along with other optimizations. Just disabling auto-invalidation contributed 56% improvement by reducing the total time taken by 33260s. [1] https://www.spinics.net/lists/gluster-devel/msg25907.html Change-Id: I0ed730dba9064bd9c576ad1800170a21e100e1ce Signed-off-by: Raghavendra Gowdappa <rgowdapp@redhat.com> updates: bz#1664934
* cluster/thin-arbiter: Consider thin-arbiter before marking new entry changelogAshish Pandey2019-02-011-6/+16
| | | | | | | | | | | | | | | | If a fop to create an entry fails on one of the data brick, we mark the pending changelog on the entry on brick for which it was successful. This is done as part of post op phase to make sure that entry gets healed even if it gets renamed to some other path where its parent was not marked as bad. As it happens as part of post op, we should consider thin-arbiter to check if the brick, which was successful, is the good brick or not. This will avoide split brain and other issues. Change-Id: I12686675be98f02f70a5186b3ed748c541514d53 updates: bz#1662264 Signed-off-by: Ashish Pandey <aspandey@redhat.com>
* tests: run nfs tests only if --enable-gnfs is providedAmar Tumballi2019-01-2414-1/+29
| | | | | | Fixes: bz#1665358 Change-Id: Idbf88ec3ac683733b32c313377eeb72f2819bf0d Signed-off-by: Amar Tumballi <amarts@redhat.com>
* locks/fencing: Add a security knob for fencingSusant Palai2019-01-223-0/+40
| | | | | | | | | | | | | There is a low level security issue with fencing since one client can preempt another client's lock. This patch does not completely eliminate the issue of a client misbehaving, but certainly it adds a security layer for default use cases that does not need fencing. Change-Id: I55cd15f2ed1ae0f2556e3d27a2ef4bc10fdada1c updates: #466 Signed-off-by: Susant Palai <spalai@redhat.com>
* lock: Add fencing supportSusant Palai2019-01-173-0/+319
| | | | | | | | | | | | | | | | | design reference: https://review.gluster.org/#/c/glusterfs-specs/+/21925/ This patch adds the lock preempt support. Note: The current model stores lock enforcement information as separate xattr on disk. There is another effort going in parallel to store this in stat(x) of the file. This patch is self sufficient to add fencing support. Based on the availability of the stat(x) support either I will rebase this patch or we can modify the necessary bits post merging this patch. Change-Id: If4a42f3e0afaee1f66cdb0360ad4e0c005b5b017 updates: #466 Signed-off-by: Susant Palai <spalai@redhat.com>
* cluster/afr: Disable client side heals in AFR by default.Sunil Kumar Acharya2019-01-104-1/+10
| | | | | | | | | With this changeset, default value for the AFR client side heal volume option is set to "off" fixes: bz#1663102 Change-Id: Ie4016932339c4896487e3e7cb5caca68739b7ba2 Signed-off-by: Sunil Kumar Acharya <sheggodu@redhat.com>
* gfapi: update returned/callback pre/post attributes to glfs_statShyamsundarR2019-01-071-3/+6
| | | | | | | Change-Id: Ie0fe971e694101aa011d66aa496d0644669c2c5a Updates: #389 Signed-off-by: Kinglong Mee <mijinlong@open-fs.com> Signed-off-by: ShyamsundarR <srangana@redhat.com>
* gfapi: new api glfs_statx as linux's statxShyamsundarR2019-01-072-0/+214
| | | | | | | Change-Id: I44dd6ceef0954ae7fc13f920e84d81bbd3f6a774 Updates: #389 Signed-off-by: Kinglong Mee <mijinlong@open-fs.com> Signed-off-by: ShyamsundarR <srangana@redhat.com>
* cluster/ta: Check number/type of locks held on ta fileAshish Pandey2018-12-271-0/+68
| | | | | | Change-Id: Iec47856ce2819e7d7d38a60279602e53ba45858d updates: bz#1624332 Signed-off-by: Ashish Pandey <aspandey@redhat.com>
* copy_file_range support in GlusterFSRaghavendra Bhat2018-12-122-0/+257
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * libglusterfs changes to add new fop * Fuse changes: - Changes in fuse bridge xlator to receive and send responses * posix changes to perform the op on the backend filesystem * protocol and rpc changes for sending and receiving the fop * gfapi changes for performing the fop * tools: glfs-copy-file-range tool for testing copy_file_range fop - Although, copy_file_range support has been added to the upstream fuse kernel module, no release has been made yet of a kernel which contains the support. It is expected to come in the upcoming release of linux-4.20 So, as of now, executing copy_file_range fop on a fused based filesystem results in fuse kernel module sending read on the source fd and write on the destination fd. Therefore a small gfapi based tool has been written to be able test the copy_file_range fop. This tool is similar (in functionality) to the example program given in copy_file_range man page. So, running regular copy_file_range on a fuse mount point and running gfapi based glfs-copy-file-range tool gives some idea about how fast, the copy_file_range (or reflink) can be. On the local machine this was the result obtained. mount -t glusterfs workstation:new /mnt/glusterfs [root@workstation ~]# cd /mnt/glusterfs/ [root@workstation glusterfs]# ls file [root@workstation glusterfs]# cd [root@workstation ~]# time /tmp/a.out /mnt/glusterfs/file /mnt/glusterfs/new real 0m6.495s user 0m0.000s sys 0m1.439s [root@workstation ~]# time glfs-copy-file-range $(hostname) new /tmp/glfs.log /file /rrr OPEN_SRC: opening /file is success OPEN_DST: opening /rrr is success FSTAT_SRC: fstat on /rrr is success copy_file_range successful real 0m0.309s user 0m0.039s sys 0m0.017s This tool needs following arguments 1) hostname 2) volume name 3) log file path 4) source file path (relative to the gluster volume root) 5) destination file path (relative to the gluster volume root) "glfs-copy-file-range <hostname> <volume> <log file path> <source> <destination>" - Added a testcase as well to run glfs-copy-file-range tool * io-stats changes to capture the fop for profiling * NOTE: - Added conditional check to see whether the copy_file_range syscall is available or not. If not, then return ENOSYS. - Added conditional check for kernel minor version in fuse_kernel.h and fuse-bridge while referring to copy_file_range. And the kernel minor version is kept as it is. i.e. 24. Increment it in future when there is a kernel release which contains the support for copy_file_range fop in fuse kernel module. * The document which contains a writeup on this enhancement can be found at https://docs.google.com/document/d/1BSILbXr_knynNwxSyyu503JoTz5QFM_4suNIh2WwrSc/edit Change-Id: I280069c814dd21ce6ec3be00a884fc24ab692367 updates: #536 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com>
* libglusterfs: Move devel headers under glusterfs directoryShyamsundarR2018-12-052-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | libglusterfs devel package headers are referenced in code using include semantics for a program, this while it works can be better especially when dealing with out of tree xlator builds or in general out of tree devel package usage. Towards this, the following changes are done, - moved all devel headers under a glusterfs directory - Included these headers using system header notation <> in all code outside of libglusterfs - Included these headers using own program notation "" within libglusterfs This change although big, is just moving around the headers and making it correct when including these headers from other sources. This helps us correctly include libglusterfs includes without namespace conflicts. Change-Id: Id2a98854e671a7ee5d73be44da5ba1a74252423b Updates: bz#1193929 Signed-off-by: ShyamsundarR <srangana@redhat.com>
* protocol/server: support server.all-squashXie Changlong2018-12-051-0/+72
| | | | | | | | | | | | | | | | | | | | | | | | | | We still use gnfs on our side, so do a little work to support server.all-squash. Just like server.root-squash, it's also a volume wide option. Also see bz#1285126 $ gluster volume set <VOLNAME> server.all-squash on Note: If you enable server.root-squash and server.all-squash at the same time, only server.all-squash works. Please refer to following table +---------------+-----------------+---------------------------+ | |all_squash | no_all_squash | +-------------------------------------------------------------+ | | |anonuid/anongid for root | |root_squash |anonuid/anongid |useruid/usergid for no-root| +-------------------------------------------------------------+ |no_root_squash |anonuid/anongid |useruid/usergid | +-------------------------------------------------------------+ Updates bz#1285126 Signed-off-by: Xie Changlong <xiechanglong@cmss.chinamobile.com> Signed-off-by: Xue Chuanyu <xuechuanyu@cmss.chinamobile.com> Change-Id: Iea043318fe6e9a75fa92b396737985062a26b47e
* cluster/afr: Add test for thin-arbiter featureAshish Pandey2018-11-261-0/+51
| | | | | | | | | Test : Check success/failure of write fop while different bricks/ta process are down. Change-Id: I3c376935df93ebf1f794c964bd19bc1280d91c59 updates: bz#1624332 Signed-off-by: Ashish Pandey <aspandey@redhat.com>
* ctime: Enable ctime feature by defaultKotresh HR2018-11-113-8/+0
| | | | | | | | | | | | | | | | | | | | This patch does following. 1. Enable ctime feature by default. 2. Earlier, to enable the ctime feature, two options needed to be enabled a. gluster vol set <volname> utime on b. gluster vol set <volname> ctime on This is inconvenient from the usability point of view. Hence changed it to following single option a. gluster vol set <volname> ctime on fixes: bz#1624724 Change-Id: I04af0e5de1ea6126c58a06ba8a26e22f9f06344e Signed-off-by: Kotresh HR <khiremat@redhat.com>
* bd: remove from the buildAmar Tumballi2018-11-081-142/+0
| | | | | | | | | | | | Based on the proposal to remove few features as they are not actively maintained [1], removed BD (block device) translator from the build. [1] - https://lists.gluster.org/pipermail/gluster-users/2018-July/034400.html Updates: bz#1635688 Change-Id: Ia96db406c58a7aef355dde6bc33523bb2492b1a9 Signed-off-by: Amar Tumballi <amarts@redhat.com>
* tiering: remove the translator from build and glusterdAmar Tumballi2018-11-0220-1731/+1
| | | | | | | | | | | | | Based on the proposal to remove few features as they are not actively maintained [1], removing tier translator from the build. Also make sure there are no regression tests involving tiering feature are present. [1] https://lists.gluster.org/pipermail/gluster-users/2018-July/034400.html Change-Id: I2c177f711f9b54b7b24e1a13525ff3132bd9a9c5 updates: bz#1642807 Signed-off-by: Amar Tumballi <amarts@redhat.com>
* stripe: remove the translator from build and glusterdAmar Tumballi2018-10-3110-72/+15
| | | | | | | | | | | | | | | | Based on the proposal to remove few features as they are not actively maintained [1], removing stripe translator from the build. Also make sure there are no regression tests involving stripe translator. [1] https://lists.gluster.org/pipermail/gluster-users/2018-July/034400.html Note that this patch aims at removing the translator from build, and a followup patch is needed to remove the code from repository. Updates: bz#1364707 Change-Id: I235b305338f138e29e9f30cba65bc0dadbebbbd5 Signed-off-by: Amar Tumballi <amarts@redhat.com>
* afr: thin-arbiter 2 domain locking and in-memory stateRavishankar N2018-10-251-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 2 domain locking + xattrop for write-txn failures: -------------------------------------------------- - A post-op wound on TA takes AFR_TA_DOM_NOTIFY range lock and AFR_TA_DOM_MODIFY full lock, does xattrop on TA and releases AFR_TA_DOM_MODIFY lock and stores in-memory which brick is bad. - All further write txn failures are handled based on this in-memory value without querying the TA. - When shd heals the files, it does so by requesting full lock on AFR_TA_DOM_NOTIFY domain. Client uses this as a cue (via upcall), releases AFR_TA_DOM_NOTIFY range lock and invalidates its in-memory notion of which brick is bad. The next write txn failure is wound on TA to again update the in-memory state. - Any incomplete write txns before the AFR_TA_DOM_NOTIFY upcall release request is got is completed before the lock is released. - Any write txns got after the release request are maintained in a ta_waitq. - After the release is complete, the ta_waitq elements are spliced to a separate queue which is then processed one by one. - For fops that come in parallel when the in-memory bad brick is still unknown, only one is wound to TA on wire. The other ones are maintained in a ta_onwireq which is then processed after we get the response from TA. Change-Id: I32c7b61a61776663601ab0040e2f0767eca1fd64 updates: bz#1579788 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Signed-off-by: Ashish Pandey <aspandey@redhat.com>
* cluster/ec : Prevent volume create without redundant brickSunil Kumar Acharya2018-10-241-0/+1
| | | | | | | | | | | | | Problem: EC volumes can be created without any redundant brick. Solution: Updated the conditional check to avoid volume create without redundant brick. fixes: bz#1642448 Change-Id: I0cb334b1b9378d67fcb8abf793dbe312c3179c0b Signed-off-by: Sunil Kumar Acharya <sheggodu@redhat.com>
* gfapi: Bug fixes in leases processing code-pathSoumya Koduri2018-10-161-2/+2
| | | | | | | | | | | | | | This patch fixes below issues in gfapi lease code-path * 'glfs_setfsleasid' should allow NULL input to be able to reset leaseid * Applications should be allowed to (un)register for upcall notifications of type GLFS_EVENT_LEASE_RECALL * APIs added to read contents of GLFS_EVENT_LEASE_RECALL argument which is of type "struct glfs_upcall_lease" Change-Id: I3320ddf235cc82fad561e13b9457ebd64db6c76b updates: #350 Signed-off-by: Soumya Koduri <skoduri@redhat.com>
* features/shard: Hold a ref on base inode when adding a shard to lru listKrutika Dhananjay2018-10-161-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | In __shard_update_shards_inode_list(), previously shard translator was not holding a ref on the base inode whenever a shard was added to the lru list. But if the base shard is forgotten and destroyed either by fuse due to memory pressure or due to the file being deleted at some point by a different client with this client still containing stale shards in its lru list, the client would crash at the time of locking lru_base_inode->lock owing to illegal memory access. So now the base shard is ref'd into the inode ctx of every shard that is added to lru list until it gets lru'd out. The patch also handles the case where none of the shards associated with a file that is about to be deleted are part of the LRU list and where an unlink at the beginning of the operation destroys the base inode (because there are no refkeepers) and hence all of the shards that are about to be deleted will be resolved without the existence of a base shard in-memory. This, if not handled properly, could lead to a crash. Change-Id: Ic15ca41444dd04684a9458bd4a526b1d3e160499 updates: bz#1605056 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com>
* cli: memory leak issues reported by asanAmar Tumballi2018-10-091-1/+1
| | | | | | | | | With this fix, a run on 'rpc-coverage.t' passes properly. This should help to get started with other fixes soon! Change-Id: I257ae4e28b9974998a451d3b490cc18c02650ba2 updates: bz#1633930 Signed-off-by: Amar Tumballi <amarts@redhat.com>
* rpc: make binding to port 0 as the default if no option is providedAmar Tumballi2018-10-021-2/+5
| | | | | | | | | | | | | | | | | | | | | | | Right now, if no option is provided, the default port is assumed, which is 24007. Ideally, for 'glusterfsd' processes, it is better to not assume there are any ports given, so it can start listening on any port which is available. This helps us to cleanup the dependencies on glusterd from glusterfsd at the moment. No changes would be done to glusterd code, but making the right defaults helps to make glusterfsd more independent process later. NOTE: This patch is a reduced version of below set of patches: * https://review.gluster.org/14613/ & * https://review.gluster.org/14670/ & * https://review.gluster.org/14671/ Credits: Prasanna Kumar Kalever <pkalever@redhat.com> updates: bz#1343926 Change-Id: Ib874e10505e7366dc56ba754458252b67052e653 Signed-off-by: Amar Tumballi <amarts@redhat.com>
* ctime: Provide noatime optionKotresh HR2018-09-251-0/+51
| | | | | | | | | | | | | | | | | Most of the applications are {c|m}time dependant and very few are atime dependant. So provide noatime option to not update atime when ctime feature is enabled. Also this option has to be enabled with ctime feature to avoid unnecessary self heal. Since AFR/EC reads data from single subvolume, atime is only updated in one subvolume triggering self heal. updates: bz#1593538 Change-Id: I085fb33c882296545345f5df194cde7b6cbc337e Signed-off-by: Kotresh HR <khiremat@redhat.com>
* cluster/ec: Fix failure of tests/basic/ec/ec-1468261.tAshish Pandey2018-09-251-0/+1
| | | | | | | | | | | | | | | | Problem: In this test we are relying on eager-lock time duration of 1 second to delay the post op + unlock phase of an entry fop so that in this 1 second we can kill 2 bricks and dirty on directory could be set. Solution: To fix this issue, we should set the others.eager-lock option to "ON" explicitly in the beginning of this test. Change-Id: I19bbb9c15d7bdf96a96b20587c618192d0b740ef fixes bz#1632161 Signed-off-by: Ashish Pandey <aspandey@redhat.com>
* cluster/afr: Use 2 domain locking in SHD for thin-arbiterkarthik-us2018-09-201-0/+49
| | | | | | | | | | | | | | | | | | | | With this change when SHD starts the index crawl it requests all the clients to release the AFR_TA_DOM_NOTIFY lock so that clients will know the in memory state is no more valid and any new operations needs to query the thin-arbiter if required. When SHD completes healing all the files without any failure, it will again take the AFR_TA_DOM_NOTIFY lock and gets the xattrs on TA to see whether there are any new failures happened by that time. If there are new failures marked on TA, SHD will start the crawl immediately to heal those failures as well. If there are no new failures, then SHD will take the AFR_TA_DOM_MODIFY lock and unsets the xattrs on TA, so that both the data bricks will be considered as good there after. Change-Id: I037b89a0823648f314580ba0716d877bd5ddb1f1 fixes: bz#1579788 Signed-off-by: karthik-us <ksubrahm@redhat.com>
* dht: utilize the framework to pass-through xlator tasksAmar Tumballi2018-09-191-2/+1
| | | | | | | | | | | | | | | | | | | | | Also fixes the issue caused due to not converting back the fn function to after getting its address. We wanted the value of the field, not the address of the pt_fop field. With this patch, DHT will always be started in pass-through mode if the number of subvols is just 1. Fixes some tests to make sure DHT is in full config (ie, subvols > 1). - increased timeout of brick-mux test as it was bordering on 300 seconds. - Also change the volume type to supported 'replica 3' from 'replica 2'. - also no DHT tests should assume presence of DHT when there is just 1 brick in volume Credits: Nithya B <nbalacha@redhat.com> fixes: #405 Change-Id: I8e55239ce58d6ac6ae1901e2e384be1ecbd33d6e Signed-off-by: Amar Tumballi <amarts@redhat.com>
* tests/dht: Uncomment cleanup stepsN Balachandran2018-09-181-5/+5
| | | | | | | | | I had forgotten to uncomment the cleanup steps for file-create.t. Fixed. Change-Id: Id702b99b8e09f56b7333491a477828b4a37b2687 updates: bz#1628194 Signed-off-by: N Balachandran <nbalacha@redhat.com>
* tests/dht: Add tests for file createN Balachandran2018-09-171-0/+120
| | | | | | | | Test dht file creates Change-Id: I7aba710f4911432bd3b86834efecae8f01e4052f updates: bz#1628194 Signed-off-by: N Balachandran <nbalacha@redhat.com>
* Land part 2 of clang-format changesGluster Ant2018-09-1227-3732/+3806
| | | | | Change-Id: Ia84cc24c8924e6d22d02ac15f611c10e26db99b4 Signed-off-by: Nigel Babu <nigelb@redhat.com>
* Land clang-format changesGluster Ant2018-09-121-29/+55
| | | | Change-Id: I6f5d8140a06f3c1b2d196849299f8d483028d33b
* cluster/dht: Rework the debug xattr to get hashed subvolN Balachandran2018-09-071-0/+54
| | | | | | | | | | | | | | | | | | | The earlier implementation required the file to already exist when trying to get the hashed subvol. The reworked implementation allows a user to get the hashed subvol for any filename, whether it exists or not. Usage: getfattr -n "dht.file.hashed-subvol.<filename>" <parent dir> Eg:To get the hashed subvol for file-1 inside dir-1 getfattr -n "dht.file.hashed-subvol.file-1" /mnt/gluster/dir1 credit: rgowdapp@redhat.com Change-Id: Iae20bd5f56d387ef48c1c0a4ffa9f692866bf739 fixes: bz#1624244 Signed-off-by: N Balachandran <nbalacha@redhat.com>
* afr: thin-arbiter read txn changesRavishankar N2018-09-051-0/+60
| | | | | | | | | | | | | | | | If both data bricks are up, read subvol will be based on read_subvols. If only one data brick is up: - First qeury the data-brick that is up. If it blames the other brick, allow the reads. - If if doesn't, query the TA to obtain the source of truth. TODO: See if in-memory state can be maintained for read txns (BZ 1624358). updates: bz#1579788 Change-Id: I61eec35592af3a1aaf9f90846d9a358b2e4b2fcc Signed-off-by: Ravishankar N <ravishankar@redhat.com>
* New flag to glusterfsd binary to print libexec dirAravinda VK2018-09-051-0/+5
| | | | | | | | | | | | New CLI option for `glusterfsd` binary to get the path of libexec directory. This helps glusterd2 to detect the installed path of `gsyncd` and other binaries. Usage: `glusterfsd --print-libexecdir` Updates: bz#1193929 Change-Id: I8c1a74afd9acec7ee7bd3deabed9d9f20fe3fb5f Signed-off-by: Aravinda VK <avishwan@redhat.com>
* multiple files: calloc -> mallocYaniv Kaul2018-09-042-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | xlators/cluster/stripe/src/stripe-helpers.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible xlators/cluster/dht/src/tier.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible xlators/cluster/dht/src/dht-layout.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible xlators/cluster/dht/src/dht-helper.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible xlators/cluster/dht/src/dht-common.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible xlators/cluster/afr/src/afr.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible xlators/cluster/afr/src/afr-inode-read.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible tests/bugs/replicate/bug-1250170-fsync.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible tests/basic/gfapi/gfapi-async-calls-test.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible tests/basic/ec/ec-fast-fgetxattr.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible rpc/xdr/src/glusterfs3.h: Move to GF_MALLOC() instead of GF_CALLOC() when possible rpc/rpc-transport/socket/src/socket.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible rpc/rpc-lib/src/rpc-clnt.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible extras/geo-rep/gsync-sync-gfid.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible cli/src/cli-xml-output.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible cli/src/cli-rpc-ops.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible cli/src/cli-cmd-volume.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible cli/src/cli-cmd-system.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible cli/src/cli-cmd-snapshot.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible cli/src/cli-cmd-peer.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible cli/src/cli-cmd-global.c: Move to GF_MALLOC() instead of GF_CALLOC() when possible It doesn't make sense to calloc (allocate and clear) memory when the code right away fills that memory with data. It may be optimized by the compiler, or have a microscopic performance improvement. In some cases, also changed allocation size to be sizeof some struct or type instead of a pointer - easier to read. In some cases, removed redundant strlen() calls by saving the result into a variable. 1. Only done for the straightforward cases. There's room for improvement. 2. Please review carefully, especially for string allocation, with the terminating NULL string. Only compile-tested! updates: bz#1193929 Original-Author: Yaniv Kaul <ykaul@redhat.com> Signed-off-by: Yaniv Kaul <ykaul@redhat.com> Signed-off-by: Amar Tumballi <amarts@redhat.com> Change-Id: I16274dca4078a1d06ae09a0daf027d734b631ac2
* cluster/afr: Delegate name-heal when possiblePranith Kumar K2018-09-041-0/+112
| | | | | | | | | | | | | | | | | | | | | | | | | Problem: When name-self-heal is triggered on the mount, it blocks lookup until name-self-heal completes. But that can lead to hangs when lot of clients are accessing a directory which needs name heal and all of them trigger heals waiting for other clients to complete heal. Fix: When a name-heal is needed but quorum number of names have the file and pending xattrs exist on the parent, then better to delegate the heal to SHD which will be completed as part of entry-heal of the parent directory. We could also do the same for quorum-number of names not present but we don't have any known use-case where this is a frequent occurrence so not changing that part at the moment. When there is a gfid mismatch or missing gfid it is important to complete the heal so that next rename doesn't assume everything is fine and perform a rename etc fixes bz#1622821 Change-Id: I8b002c85dffc6eb6f2833e742684a233daefeb2c Signed-off-by: Pranith Kumar K <pkarampu@redhat.com>
* libgfchangelog: Fix changelog history APIKotresh HR2018-08-311-0/+86
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: If requested start time and end time doesn't fall into first HTIME file, then history API fails even though continuous changelogs are avaiable for the requested range in other HTIME files. This is induced by changelog disable and enable which creates fresh HTIME index file. Cause and Analysis: Each HTIME index file represents the availability of continuous changelogs. If changelog is disabled and enabled, a new HTIME index file is created represents non availability of continuous changelogs. So as long as the requested start and end falls into single HTIME index file and not across, history API should succeed. But History API checks for the changelogs only in first HTIME index file and errors out if not available. Fix: Check in all HTIME index files for availability of continuous changelogs for requested change. fixes: bz#1622549 Change-Id: I80eeceb5afbd1b89f86a9dc4c320e161907d3559 Signed-off-by: Kotresh HR <khiremat@redhat.com>
* cluster/afr: Delegate metadata heal with pending xattrs to SHDPranith Kumar K2018-08-281-10/+18
| | | | | | | | | | | | | | | | | | | Problem: When metadata-self-heal is triggered on the mount, it blocks lookup until metadata-self-heal completes. But that can lead to hangs when lot of clients are accessing a directory which needs metadata heal and all of them trigger heals waiting for other clients to complete heal. Fix: Only when the heal is needed but the pending xattrs are not set, trigger metadata heal that could block lookup. This is the only case where different clients may give different metadata to the clients without heals, which should be avoided. Updates bz#1622821 Change-Id: I6089e9fda0770a83fb287941b229c882711f4e66 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com>
* posix-acl: skip acl_permits check when the owner setting GF_POSIX_ACL_xxxxKinglong Mee2018-08-272-0/+117
| | | | | | Change-Id: Iaeea470d040587027f37e0760ae27c4fc205a189 fixes: bz#1613098 Signed-off-by: Kinglong Mee <mijinlong@open-fs.com>
* ctr: skip ctr xlator init if ctr is not enabledMohit Agrawal2018-08-271-6/+0
| | | | | | | | | | | | Problem: If ctr xlator is not required it consumes resources unnecessarily Solution: Call ctr xlator init only while feature is enabled Fixes: bz#1524323 Change-Id: I378113a390a286be20c4ade1b1bac170a8ef1b14 Signed-off-by: Mohit Agrawal <moagrawal@redhat.com>
* features/snapview-server: validate the fs instance before doing fop thereRaghavendra Bhat2018-08-241-0/+74
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PROBLEM: ======== USS design depends on snapview-server translator communicating with each individual snapshot via gfapi. So, the snapview-server xlator maintains the glfs instance (thus the snapshot) to which a inode belongs to by storing it inside the inode context. Suppose, a file from a snapshot is opened by a application, and the fd is still valid from application's point of view (i.e. application has not yet closed fd). Now, if the snapshot to which the opened file belongs to is deleted, then the glfs_t instance corresponding to the snapshot is destroyed by snapview-server as part of snap deletion. But now, if the application does IO on the fd it has kept open, then snapview server tries to send that request to the corresponding snap via glfs instance for that snapshot stored in the inode context for the file on which the application is sending the fop. And this results in freed up glfs_t pointer being accessed and causes a segfault. FIX: === For fd based operations, check whether the glfs instance that the inode contains in its context, is still valid or not. For non fd based operations, usually lookup should guarantee that. But if the file was already looked up, and the client accessing the snap data (either NFS, or native glusterfs fuse) does not bother to send a lookup and directly sends a path based fop, then that path based fop should ensure that the fs instance is valid. Change-Id: I881be15ec46ecb51aa844d7fd41d5630f0d644fb updates: bz#1602070 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com>
* xlators/playground: fix the template files with latest requirementsAmar Tumballi2018-08-222-3/+37
| | | | | | | | | | | | | | | * Make use of xlator_api * Make use of gf_msg() * Make use of mem-pool * Add a sample metrics dump function * Provide an dummy option, which can be initialized, and reconfigured * Add a test case to make sure template xlator is built and used with default fops * Make a change in rpc-coverage to run without lock tests. Updates: bz#1193929 Change-Id: I377dd67b656f440f9bc7c0098e21c0c1934e9096 Signed-off-by: Amar Tumballi <amarts@redhat.com>
* snapshot:Fail snapshot creation if an empty description providedMohammed Rafi KC2018-08-191-0/+1
| | | | | | | | | | Snapshot description should have a valid string. Creating a snapshot with null value will cause reading from info file to fail with a null exception Change-Id: I9f84154b8e3e7ffefa5438807b3bb9b4e0d964ca updates: bz#1618004 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com>
* performance/readdir-ahead: keep stats of cached dentries in sync with ↵Krutika Dhananjay2018-08-181-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | modifications PROBLEM: Stats of dentries that are readdirp'd ahead can become stale due to fops like writes, truncate etc that modify the file pointed by dentries. When a readdir is finally wound at offset corresponding to these entries, the iatts that are returned to the application come from readdir-ahead's cache, which are stale by now. This problem gets further aggravated when caching translators/modules cache and continue to serve this stale information. FIX: * Store the iatt in context of the inode pointed by dentry. * Whenever the inode pointed by dentry undergoes modification, in cbk of modification fop, update the iatt stored in inode-ctx to reflect the modification. * When serving a readdirp response from application, update iatts of dentries with the iatts stored in the context of inodes pointed by these dentries. * Some fops don't have valid iatts in their responses. For eg., write response whose data is still cached in write-behind will have zeroed out stat. In this case keep only ia_type and ia_gfid and reset rest of the iatt members to zero. - fuse-bridge in this case just sends "entry" information back to kernel and attr is not sent. - gfapi sets entry->inode to NULL and zeroes out the entire stat * There is one tiny race between the entry creation and a readdirp on its parent dir, which could cause the inode-ctx setting and inode ctx reading to happen on two different inode objects. To prevent this, when entry->inode doesn't eqaul to linked_inode, - fuse-bridge is made to send only "entry" information without attributes - gfapi sets entry->inode to NULL and zeroes out the entire stat. Change-Id: Ia27ff49a61922e88c73a1547ad8aacc9968a69df BUG: 1390050 Updates: bz#1390050 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Signed-off-by: Raghavendra G <rgowdapp@redhat.com>
* tests: Add thin-arbiter.rc for writing tests for thin-arbiterPranith Kumar K2018-08-181-0/+44
| | | | | | fixes bz#1615789 Change-Id: I1f42e78fec5ddaf2a425dc4b82c9a20472aa146d Signed-off-by: Pranith Kumar K <pkarampu@redhat.com>
* tests: Fix spurious failures in stats-dump.t testShyamsundarR2018-08-161-0/+8
| | | | | | | | | | | | | | | | | The test fails to grep and find queue_size, in a brick stats dump, having succesfully found aggr.* values in the same. The troubleshot is that, the writer thread in io-stats, that dumps this in a particular interval, truncates the file just before the grep attempts to read the contents, and hence the failure. The fix is to stop the dumper thread, and then wait for a couple of seconds and then check the output, so that the thread writer does not interfere with the test. Fixes: bz#1615582 Change-Id: I29f95488a2ad693abe1dd525b1d87a9d1eee29a2 Signed-off-by: ShyamsundarR <srangana@redhat.com>
* tests: Fix for gfid-mismatch-resolution-with-fav-child-policy.t failurekarthik-us2018-08-141-0/+1
| | | | | | | | | | | | | | | | | | | This test was retried once on build https://build.gluster.org/job/regression-on-demand-multiplex/174/ (logs for the first try is not available with this build) Test case was failing in line #47 where it was was checking for the heal count to be 0. Line #51 had passed that means file got the gfid split brain resolved, and both the bricks had same gfids. At line #54 it again failed which checks for the md5sum on both the bricks. At this point the md5sum of the brick where the file got impunged had the md5sum same as the newly created empty file. This means the data heal has not happened for the file. At line #64 enabling granular-entry-heal faild, but without the logs it is not possible to debug this issue. Change-Id: I56d854dbb9e188cafedfd24a9d463603ae79bd06 fixes: bz#1615331 Signed-off-by: karthik-us <ksubrahm@redhat.com>
* tests: fix brick check ordersAtin Mukherjee2018-08-131-2/+2
| | | | | | | | | | | | fix brick checks for validating-server-quorum.t & quorum-validation.t ...and make brick_up_status_1 function more generic. Also fix a timing issue in bug-1482023-snpashot-issue-with-other-processes-accessing-mounted-path.t Change-Id: I797ef4cec5b160aafa979bae7151b1e99fcb48ac Updates: bz#1603063 Signed-off-by: Atin Mukherjee <amukherj@redhat.com>
generated by cgit (git 2.34.1) at 2024-06-03 11:01:28 +0000