summaryrefslogtreecommitdiffstats
path: root/rpc
Commit message (Collapse)AuthorAgeFilesLines
* rpc: fix binding brick issue while bind-insecure is enabledPrasanna Kumar Kalever2015-07-265-54/+91
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is backport of http://review.gluster.org/#/c/11512/ > problem: > When bind-insecure is turned on (which is the default now), it may happen > that brick is not able to bind to port assigned by Glusterd for example > 49192-49195... > > It seems to occur because the rpc_clnt connections are binding to ports in > the same range. so brick fails to bind to a port which is already used by > someone else > > solution: > > fix for now is to make rpc_clnt to get port numbers from 65535 in a > descending > order, as a result port clash is minimized > > other fixes: > > previously rdma binds to port >= 1024 if it cannot find a free port < 1024, > even when bind insecure was turned off(ref to commit '0e3fd04e'), this patch > add's a check for bind-insecure in gf_rdma_client_bind function > > This patch also re-enable bind-insecure and allow insecure by default > which was reverted (ref: commit cef1720) previously > Change-Id: Ia1cfa93c5454e2ae0ff57813689b75de282ebd07 > BUG: 1238661 > Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com> Change-Id: Iea55f9b2a57b5e24d3df2c5fafae12fe99e9dee0 BUG: 1246481 Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com> Reviewed-on: http://review.gluster.org/11758 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* rpc,server,glusterd: Init transport list for accepted transportKaushal M2015-07-261-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | GlusterD or a brick would crash when encrypted transport was enabled and an unencrypted client tried to connect to them. The crash occured when GlusterD/server tried to remove the transport from their xprt_list due to a DISCONNECT event. But as the client transport's list head wasn't inited, the process would crash when list_del was performed. Initing the client transports list head during acceptence, prevents this crash. Also, an extra check has been added to the GlusterD and Server notification handlers for client DISCONNECT events. The handlers will now first check if the client transport is a member of any list. GlusterD and Server DISCONNECT event handlers could be called without the ACCEPT handler, which adds the transport to the list, being called. This situation also occurs when an unencrypted client tries to establish a connection with an encrypted server. Change-Id: Icc24a08d60e978aaa1d3322e0cbed680dcbda2b4 BUG: 1246809 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/11692 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> (cherry picked from commit a909ccfa1b4cbf656c4608ef2124347851c492cb) Reviewed-on: http://review.gluster.org/11762
* rpc-transport: socket_poller fixes for proper working of mgmt encryptionKaushal M2015-07-141-5/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Backport of 8c39f14 from master socket_poller, the polling function used by ssl own_thread, had two issues which lead to GlusterD crashes when using management encryption Issue 1 ------- socket_poller calls functions which require THIS to be set. But, THIS was being set conditionally. Because of this, functions could sometimes be called without THIS being set. For example, rpc_transport_notify could be called for an accepted client socket without THIS being set, as THIS was only set it the transport wasn't yet connected. This would cause the process to crash when THIS was accessed by the called functions. To fix this, THIS is being set at the start of socket_poller unconditionally. Issue 2 ------- DISCONNECT notify was being sent on the listener transport instead of the client transport. The DISCONNECT event was converted to a LISTENER_DEAD event in rpcsvc_handle_disconnect, as it could not find the listener socket of the listener socket. GlusterD was notified of a LISTENER_DEAD event instead of a DISCONNECT and failed to remove the client transport from its xprt_list. The transport would subsequently be freed, leaving the xprt_list with a corrupted/invalid entry. Later, when GlusterD would iterate over the xprt_list to send notifications, it would crash when the invalid entry was accessed. To fix this, DISCONNECT notification in socket_poller is sent on the client socket, as it is done in the epoll handler. Change-Id: I0370b7c6d7eb13de10ebf08d91a4a39dc7d64c7a BUG: 1242734 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/11655 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com>
* Revert "rpc: By default set allow-insecure, bind-insecure to on"Raghavendra G2015-07-024-52/+21
| | | | | | | | | | | | | This reverts commit 243a5b429f225acb8e7132264fe0a0835ff013d5. This patch introduced a regression where client no longer binds to privileged port. This is causing lots of regressions. Hence reverting this patch for now and will be resent after suitable modifications. Change-Id: I302252fd3832b0a5a03b04e30cfa0def37597404 Reviewed-on: http://review.gluster.org/11508 Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com>
* rpc: By default set allow-insecure, bind-insecure to onPrasanna Kumar Kalever2015-06-304-21/+52
| | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/11039 since we now use SSL (Secure Sockets Layer) for the security issues, the patch changes the default setting to allow connections/requests from non-privilaged ports by setting allow-insecure and bind-insecure to 1 Also added bind functionality for insecure binding which can select from available local ports dynamically BUG: 1232660 Change-Id: I927e112223f33611452093e38cd846a0b9347e57 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com> Reviewed-on: http://review.gluster.org/11274 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* rdma : removing duplicate printing of error string in gf_msgManikandan Selvaganesh2015-06-282-35/+27
| | | | | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/#/c/11426/ Cherry picked from commit 7a3736b4a46dd07d65e27d892a85299a37fdd9a2 > Change-Id: I206cf80392d430f35558cc11699402c4cef12527 > BUG: 1194640 > Signed-off-by: Manikandan Selvaganesh <mselvaga@redhat.com> > Reviewed-on: http://review.gluster.org/11426 > Tested-by: NetBSD Build System <jenkins@build.gluster.org> > Reviewed-by: Raghavendra G <rgowdapp@redhat.com> > Tested-by: Raghavendra G <rgowdapp@redhat.com> Change-Id: I206cf80392d430f35558cc11699402c4cef12527 BUG: 1217722 Signed-off-by: Manikandan Selvaganesh <mselvaga@redhat.com> Reviewed-on: http://review.gluster.org/11448 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anuradha Talur <atalur@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com>
* rdma: porting rdma to new message id logging formatHumble Devassy Chirammal2015-06-256-372/+780
| | | | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/#/c/9868/ Cherry picked from 4306245aef7cdcbfa6d7a59dccd031d4ada54105 > Change-Id: I71e940817ae0a9378e82332d5a8569114fc13482 > BUG: 1194640 > Signed-off-by: Humble Devassy Chirammal <hchiramm@redhat.com> > Reviewed-on: http://review.gluster.org/9868 > Tested-by: Gluster Build System <jenkins@build.gluster.com> > Reviewed-by: Raghavendra G <rgowdapp@redhat.com> > Tested-by: Raghavendra G <rgowdapp@redhat.com> Change-Id: I71e940817ae0a9378e82332d5a8569114fc13482 BUG: 1217722 Signed-off-by: Humble Devassy Chirammal <hchiramm@redhat.com> Reviewed-on: http://review.gluster.org/10673 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com>
* features/bitrot: tuanble object signing waiting time value for bitrotGaurav Kumar Garg2015-06-171-0/+1
| | | | | | | | | | | | | | | | | Currently bitrot using 120 second waiting time for object to be signed after all fop's released. This signing waiting time value should be tunable. Command for changing the signing waiting time will be #gluster volume bitrot <VOLNAME> signing-time <waiting time value in second> Change-Id: I89f3121564c1bbd0825f60aae6147413a2fbd798 BUG: 1231832 Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/11105 (cherry picked from commit 554fa0c1315d0b4b78ba35a2d332d7ac0fd07d48) Reviewed-on: http://review.gluster.org/11235 Tested-by: Gluster Build System <jenkins@build.gluster.com>
* build: fix compiling on older distributionsNiels de Vos2015-06-111-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | data-tiering is disabled on RHEL-5 because it depends on a too new SQLite version. This change also prevents installing some of files that are used by geo-replication, which is also not available on RHEL-5. geo-replication depends on a too recent version of Python. Due to an older version of OpenSSL, some of the newer functions can not be used. A fallback to previous functions is done. Unfortunately RHEL-5 does not seem to have TLSv1.2 support, so only older versions can be used. Cherry picked from commit 0209b18fd65f9df5ebd0a8764ebf864d0d392998: > Change-Id: I672264a673f5432358d2e83b17e2a34efd9fd913 > BUG: 1222317 > Signed-off-by: Niels de Vos <ndevos@redhat.com> > Reviewed-on: http://review.gluster.org/10803 > Tested-by: NetBSD Build System <jenkins@build.gluster.org> > Tested-by: Gluster Build System <jenkins@build.gluster.com> > Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> > Reviewed-by: Vijay Bellur <vbellur@redhat.com> Also including the changes from http://review.gluster.org/11140: > build: improve detection of new OpenSSL features > > Building on Mac OS X revealed that the current check for > CRYPTO_THREADID_set_callback() availability in OpenSSL is not correct. > > There also does not seem to be a guarantee that TLSv1_2_method() is > available when TLS1_2_VERSION is #define'd. > > Change-Id: I21508065fc181a1c74bee4fd6d23bb5bdf7cea7a > BUG: 1222317 > Reviewed-on: http://review.gluster.org/11140 > Original-author: Kaleb KEITHLEY <kkeithle@redhat.com> > Signed-off-by: Niels de Vos <ndevos@redhat.com> Change-Id: I672264a673f5432358d2e83b17e2a34efd9fd913 BUG: 1228510 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/11096 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* rpc: call transport_unref only on non-NULL transportKrishnan Parthasarathi2015-06-091-2/+8
| | | | | | | | | | | BUG: 1228601 Change-Id: Ifac4dd8c633081483e4eba9d7e5a89837b2a453a Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/11041 Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/11102 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* socket: throttle only connected transportKrishnan Parthasarathi2015-06-041-2/+15
| | | | | | | | | | | | BUG: 1227167 Change-Id: I2352c6661ae5aee8cf06e572ec0462b76901d46f Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/10887 Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/11038 Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: Raghavendra G <rgowdapp@redhat.com>
* glusterd: fix repeated connection to nfssvc failed msgsKrishnan Parthasarathi2015-06-011-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | ... and disable reconnect timer on rpc_clnt_disconnect. Root Cause ---------- gluster-NFS service wouldn't be started if there are no started volumes that have nfs service enabled for them. Before this fix we would initiate a connect even when the gluster-NFS service wasn't (re)started. Compounding that glusterd_conn_disconnect doesn't disable reconnect timer. So, it is possible that the reconnect timer was in execution when the timer event was attempted to be removed. Change-Id: Iadcb5cff9eafefa95eaf3a1a9413eeb682d3aaac BUG: 1222065 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/10830 Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Gaurav Kumar Garg <ggarg@redhat.com> Reviewed-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/10963 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Emmanuel Dreyfus <manu@netbsd.org>
* cli/tiering: Enhance cli output for tieringMohammed Rafi KC2015-05-091-1/+2
| | | | | | | | | | | | | | | | | | | | | | | back port of http://review.gluster.org/10284 Fix for handling cli output for attach-tier and detach-tier >Change-Id: I4d17f4b09612754fe1b8cec6c2e14927029b9678 >BUG: 1211562 >Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> >Reviewed-on: http://review.gluster.org/10284 >Reviewed-by: Dan Lambright <dlambrig@redhat.com> >Tested-by: Gluster Build System <jenkins@build.gluster.com> >Tested-by: NetBSD Build System >Reviewed-by: Vijay Bellur <vbellur@redhat.com> Change-Id: Ic30c8f0a104d89bf98f5d0069937a34674ee3f2d BUG: 1220052 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/10713 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: support for tier volumes 'detach start' and 'detach commit'Dan Lambright2015-05-091-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Back port of http://review.gluster.org/10108 These commands work in a manner analagous to rebalancing when removing a brick. The existing migration daemon detects "detach start" and switches to moving data off the hot tier. While in this state all lookups are directed to the cold tier. gluster v detach-tier <vol> start gluster v detach-tier <vol> commit The status and stop cli commands shall be submitted separately. >Change-Id: I24fda5cc3ba74f5fb8aa9a3234ad51f18b80a8a0 >BUG: 1205540 >Signed-off-by: Dan Lambright <dlambrig@redhat.com> >Signed-off-by: root <root@localhost.localdomain> >Signed-off-by: Dan Lambright <dlambrig@redhat.com> >Reviewed-on: http://review.gluster.org/10108 >Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Change-Id: I212d748d077fb5870ee84b316c653acbafbea3f7 BUG: 1220047 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/10708 Reviewed-by: Dan Lambright <dlambrig@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* quota/marker: turn off inode quotas by defaultvmallika2015-05-081-0/+1
| | | | | | | | | | | | | | | | | | | | | | | inode quota is a new feature implemented in glusterfs-3.7 if quota is enabled in the older version and is upgraded to a new version, we can hit setxattr spike during self-heal of inode quotas. So, when a quota is enabled, turn off inode-quotas with a xlator option. With this patch, we still account for inode quotas but only when a write operation is performed for a particular file. User will be able to query inode quotas once the Inode-quota xlator option is enabled. Change-Id: I52fb28bf7024989ce7bb08ac63a303bf3ec1ec9a BUG: 1218243 Signed-off-by: vmallika <vmallika@redhat.com> Signed-off-by: Sachin Pandit <spandit@redhat.com> Reviewed-on: http://review.gluster.org/10152 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com> Signed-off-by: Sachin Pandit <spandit@redhat.com> Reviewed-on: http://review.gluster.org/10621
* Upcall: Send stat as part of cache_invalidation notificationsSoumya Koduri2015-05-071-0/+8
| | | | | | | | | | | | | | | | | Have added support to send attributes of both entries and its parent (include oldparent in case of RENAME fop) in the same notification request to avoid multiple rpc requests. Also, made changes in gfapi to send parent object and its attributes changed in a single upcall event. Change-Id: I92833da3bcec38d65216921c2ce4d10367c32ef1 BUG: 1217711 Signed-off-by: Soumya Koduri <skoduri@redhat.com> Reviewed-on: http://review.gluster.org/10568 Tested-by: NetBSD Build System Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* rpc: Included necessary stats in 'gfs3_cbk_cache_invalidation_req'Soumya Koduri2015-05-071-0/+6
| | | | | | | | | | | | | | | | | To avoid extra network fops, it will benifit clients if the server can send the updated stat of the file/dir and of the parent directory (including oldparent in case of RENAME fop) while sending GF_CBK_CACHE_INVALIDATION upcall event. This patch handles rpc protocol changes. Change-Id: Ic096a61c4d24a8d75a8285be78deb237d7ef9484 BUG: 1217711 Signed-off-by: Soumya Koduri <skoduri@redhat.com> Reviewed-on: http://review.gluster.org/10452 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/10567 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System
* Upcall: Replaced opaque gfid with string in rpc cbk argsSoumya Koduri2015-05-072-4/+13
| | | | | | | | | | | | | | | | For GF_CBK_CACHE_INVALIDATION, have changed the type of gfid to be string (cannonical form) instead of opaque byte format to ensure correctness across platforms supporting different endianness. BUG: 1217711 Change-Id: Iac4372714f4b4ebcd9c4393aaf46ceba3f37f587 Signed-off-by: Soumya Koduri <skoduri@redhat.com> Reviewed-on: http://review.gluster.org/10224 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/10563 Tested-by: NetBSD Build System Tested-by: Gluster Build System <jenkins@build.gluster.com>
* Upcall: Process each of the upcall events separatelySoumya Koduri2015-05-073-20/+41
| | | | | | | | | | | | | | | | | | As suggested during the code-review of Bug1200262, have modified GF_CBK_UPCALL to be exlusively GF_CBK_CACHE_INVALIDATION. Thus, for any new upcall event, a new CBK procedure will be added. Also made changes to store upcall data separately based on the upcall event type received. BUG: 1217711 Change-Id: I0f5e53d6f5ece16aecb514a0a426dca40fa1c755 Signed-off-by: Soumya Koduri <skoduri@redhat.com> Reviewed-on: http://review.gluster.org/10049 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/10562 Tested-by: NetBSD Build System Tested-by: Gluster Build System <jenkins@build.gluster.com>
* rdma:properly handle iobuf_pool when rdma transport is unloadedMohammed Rafi KC2015-05-072-20/+62
| | | | | | | | | | | | | | | | | | | | | Back port of : http://review.gluster.org/9854 We are registering iobuf_pool with rdma. When rdma transport is unloaded, we need to deregister all the buffers registered with rdma. Otherwise iobuf_arena destroy will fail. Also if rdma.so is loaded again, then register iobuf_pool with rdma Change-Id: Ic197721a44ba11dce41e03058e0a73901248c541 BUG: 1218653 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/9854 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-on: http://review.gluster.org/10585 Tested-by: NetBSD Build System Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: remove replace brick with data migration support form cli/glusterdGaurav Kumar Garg2015-05-071-10/+0
| | | | | | | | | | | | | | | | | Replace-brick operation with data migration support have been deprecated from gluster. With this fix replace brick command will support only one commad gluster volume replace-brick <VOLNAME> <SOURCE-BRICK> <NEW-BRICK> {commit force} Change-Id: Ib81d49e5d8e7eaa4ccb5830cfec2bc081191b43b BUG: 1218602 Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> Reviewed-on: http://review.gluster.org/10577 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System Reviewed-by: Kaushal M <kaushal@redhat.com>
* glusterd: gluster volume status should show status of bitrot and scrubber daemonGaurav Kumar Garg2015-05-061-16/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | Command gluster volume status <VOLNAME> should show the status of bitrot and scrubber daemon and its pid information. Along with displaying bitrot and scrubber daemon information in gluster volume status command there should be command to show its individual status separately. Command to show individual status of bitrot and scrubber daemon will following. command to show only bitd daemon information will be gluster volume status <VOLNAME> bitd command to show only scrubber daemon information gluster volume status <VOLNAME> scrub Change-Id: Id86aae1156c8c599347c98e2a538f294d37376e4 BUG: 1218123 Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> Reviewed-on: http://review.gluster.org/10175 Reviewed-by: Kaushal M <kaushal@redhat.com> Tested-by: Kaushal M <kaushal@redhat.com> (cherry picked from commit da1416051d19d612d131acfde8589bc8658979b5) Reviewed-on: http://review.gluster.org/10519 Tested-by: Gluster Build System <jenkins@build.gluster.com>
* geo-rep: Status EnhancementsAravinda VK2015-05-061-6/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Discussion in gluster-devel http://www.gluster.org/pipermail/gluster-devel/2015-April/044301.html MASTER NODE - Master Volume Node MASTER VOL - Master Volume name MASTER BRICK - Master Volume Brick SLAVE USER - Slave User to which Geo-rep session is established SLAVE - <SLAVE_NODE>::<SLAVE_VOL> used in Geo-rep Create command SLAVE NODE - Slave Node to which Master worker is connected STATUS - Worker Status(Created, Initializing, Active, Passive, Faulty, Paused, Stopped) CRAWL STATUS - Crawl type(Hybrid Crawl, History Crawl, Changelog Crawl) LAST_SYNCED - Last Synced Time(Local Time in CLI output and UTC in XML output) ENTRY - Number of entry Operations pending.(Resets on worker restart) DATA - Number of Data operations pending(Resets on worker restart) META - Number of Meta operations pending(Resets on worker restart) FAILURES - Number of Failures CHECKPOINT TIME - Checkpoint set Time(Local Time in CLI output and UTC in XML output) CHECKPOINT COMPLETED - Yes/No or N/A CHECKPOINT COMPLETION TIME - Checkpoint Completed Time(Local Time in CLI output and UTC in XML output) XML output: <?xml version="1.0" encoding="UTF-8" standalone="yes"?> cliOutput> geoRep> volume> name> sessions> session> session_slave> pair> master_node> master_brick> slave_user> slave/> slave_node> status> crawl_status> entry> data> meta> failures> checkpoint_completed> master_node_uuid> last_synced> checkpoint_time> checkpoint_completion_time> BUG: 1218586 Change-Id: I944a6c3c67f1e6d6baf9670b474233bec8f61ea3 Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/10121 Reviewed-by: Kotresh HR <khiremat@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com> Reviewed-on: http://review.gluster.org/10574 Tested-by: Gluster Build System <jenkins@build.gluster.com>
* rpc: Maintain separate xlator pointer in 'rpcsvc_state'Kotresh HR2015-05-052-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The structure 'rpcsvc_state', which maintains rpc server state had no separate pointer to track the translator. It was using the mydata pointer itself. So callers were forced to send xlator pointer as mydata which is opaque (void pointer) by function prototype. 'rpcsvc_register_init' is setting svc->mydata with xlator pointer. 'rpcsvc_register_notify' is overwriting svc->mydata with mydata pointer. And rpc interprets svc->mydata as xlator pointer internally. If someone passes non xlator structure pointer to rpcsvc_register_notify as libgfchangelog currently does, it might corrupt mydata. So interpreting opaque mydata as xlator pointer is incorrect as it is caller's choice to send mydata as any type of data to 'rpcsvc_register_notify'. Maintaining two different pointers in 'rpcsvc_state' for xlator and mydata solves the issue. BUG: 1218381 Change-Id: I4c28937a30845e3f41b6fc7a09036149c816659b Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/10366 Reviewed-on: http://review.gluster.org/10534 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System Reviewed-by: Aravinda VK <avishwan@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* rpc: Perform throttling conditionallyVijay Bellur2015-05-031-6/+19
| | | | | | | | | | | | | | | | This change makes rpc's throttling to be performed only if attribute throttle is set in rpcsvc_t. Change-Id: I24620095570e206f5dc8fc6208fcf55cb22a1658 BUG: 1216310 Signed-off-by: Vijay Bellur <vbellur@redhat.com> Reviewed-on: http://review.gluster.org/10268 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/10443 Tested-by: NetBSD Build System
* rpc: Introduce attribute throttle for rpcsvc_tVijay Bellur2015-05-033-0/+58
| | | | | | | | | | | | | | | | | | | | | | | | This attribute will be used to set/unset throttling for a rpcsvc_t program subsequently. Following APIs have been added to get/set throttle. int rpcsvc_set_throttle (rpcsvc_t svc, gf_boolean_t value); gf_boolean_t rpcsvc_get_throttle (rpcsvc_t svc); Change-Id: Ica8a9166cef22eb92d81fe68e48d0a5e24a1ef95 BUG: 1216310 Signed-off-by: Vijay Bellur <vbellur@redhat.com> Reviewed-on: http://review.gluster.org/10267 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/10442 Tested-by: NetBSD Build System
* quota: display error when inode-quota cmds executed with cluster ver < 3.7vmallika2015-04-281-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a backport of http://review.gluster.org/#/c/10261/ > In a heterogeneous cluster with op_version less than 3.7, inode quotas will > be accounted on those bricks which has glusterfs version 3.7 and this is > not available in older version. > This will have incorrect values displayed when user queries inode count > from CLI. > > This patch will display error when inode-quota commands > are executed with cluster version less than 3.7 > > Change-Id: Ia0e6d5635d1d8e7b2e2cfc3daa7b7f9e314a263a > BUG: 1212253 > Signed-off-by: vmallika <vmallika@redhat.com> > Reviewed-on: http://review.gluster.org/10261 > Tested-by: Gluster Build System <jenkins@build.gluster.com> > Reviewed-by: Atin Mukherjee <amukherj@redhat.com> > Reviewed-by: Vijay Bellur <vbellur@redhat.com> Change-Id: I1ddd605e5b87a248aa85f0eab14c404895751083 BUG: 1215907 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/10415 Tested-by: NetBSD Build System Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cli: fix vol_type in volume info xmlAtin Mukherjee2015-04-281-1/+2
| | | | | | | | | | | | | | | | | xml parsing of voltype should be inline with the cli Backport of http://review.gluster.org/10271 Change-Id: I41ddddac00d07f03b56a041e1c3f5a132fbd7393 BUG: 1215517 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/10271 Tested-by: NetBSD Build System Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com> (cherry picked from commit 4c3724f195240e40994b71add255f85ee1b025fb) Reviewed-on: http://review.gluster.org/10396 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com>
* rpc-lib: Fixing the coverity issuesNandaja Varma2015-04-104-20/+14
| | | | | | | | | | | | | | | | | Coverity CIDs: 1210973 1124887 1124888 1124682 1124849 1124503 Change-Id: I012f6cf9d14753f572ab94aae6d442d1ef8df79a BUG: 789278 Signed-off-by: Nandaja Varma <nandaja.varma@gmail.com> Reviewed-on: http://review.gluster.org/9600 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* rpc: fix deadlock when unref is inside conn->lockKrishnan Parthasarathi2015-04-101-70/+91
| | | | | | | | | | | | | | | | | In ping-timer implementation, the timer event takes a ref on the rpc object. This ref needs to be removed after every timeout event. ping-timer mechanism could be holding the last ref. For e.g, when a peer is detached and its rpc object was unref'd. In this case, ping-timer mechanism would try to acquire conn->mutex to perform the 'last' unref while being inside the critical section already. This will result in a deadlock. Change-Id: I74f80dd08c9348bd320a1c6d12fc8cd544fa4aea BUG: 1206134 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/9613 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* socket: use OpenSSL multi-threading interfacesJeff Darcy2015-04-092-3/+70
| | | | | | | | | | | | | | | | | | | | | | | | OpenSSL isn't thread-safe unless you register these locking and thread ID functions. Most often the crashes would occur around X509_verify_cert, even though it's insane that the certificate parsing functions wouldn't be thread-safe. The bug for this was filed over two years ago, but it didn't seem like a high priority because the bug didn't bite anyone until it caused a spurious regression-test failure. Ironically, that was on a test for a *different* spurious regression-test failure, which I guess is just deserts[1] for leaving this on the to-do list so long. [1] Yes, it really is "deserts" in that phrase - not as in very dry places, but from late Latin "deservire" meaning to serve well or zealously. Aren't commit messages educational? Change-Id: I2a6c0e9b361abf54efa10ffbbbe071404f82b0d9 BUG: 906763 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/10075 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* build: add more files to .gitignoreNiels de Vos2015-04-061-6/+8
| | | | | | | | | Change-Id: Icef0d7f443f7caf3aa386d3a6978f98cf3a5a4af BUG: 1198849 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/10132 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* rpc: Fixing dereferencing after null checkarao2015-04-021-3/+9
| | | | | | | | | | | | | | CID: 1124607 The pointer variable is checked for NULL and logged accordingly. Change-Id: Ied0d7f7ff33da22198eca65f14816b943cae5541 BUG: 789278 Signed-off-by: arao <arao@redhat.com> Reviewed-on: http://review.gluster.org/9674 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* socket: use TLS 1.2 instead of 1.0Jeff Darcy2015-03-271-1/+1
| | | | | | | | | Change-Id: I96e9b37e4855f5e12b2dbecf1f0b0887b21ad5ad Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/9949 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: CLI commands to create and manage tiered volumes.Dan Lambright2015-03-192-3/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A tiered volume is a normal volume with some number of new bricks representing "hot" storage. The "hot" bricks can be attached or detached dynamically to a normal volume. When this happens, a new graph is constructed. The root of the new graph is an instance of the tier translator. One subvolume of the tier translator leads to the old volume, and another leads to the new hot bricks. attach-tier <VOLNAME> [<replica> <COUNT>] <NEW-BRICK> ... [force] volume detach-tier <VOLNAME> [replica <COUNT>] <BRICK> ... <start|stop|status|commit|force> gluster volume rebalance <volume> tier start gluster volume rebalance <volume> tier stop gluster volume rebalance <volume> tier status The "tier start" CLI command starts a server side daemon. The daemon initiates file level migration based on caching policies. The daemon's status can be monitored and stopped. Note development on the "tier status" command is incomplete. It will be added in a subsequent patch. When the "hot" storage is detached, the tier translator is removed from the graph and the tiered volume reverts to its original state as described in the volume's info file. For more background and design see the feature page [1]. [1] http://www.gluster.org/community/documentation/index.php/Features/data-classification Change-Id: Ic8042ce37327b850b9e199236e5be3dae95d2472 BUG: 1194753 Signed-off-by: Dan Lambright <dlambrig@redhat.com> Reviewed-on: http://review.gluster.org/9753 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* cli/glusterd: cli command implementation for bitrot featuresGaurav Kumar Garg2015-03-182-0/+11
| | | | | | | | | | | | | | | | | CLI command for bitrot features. volume bitrot <volname> enable|disable Above command will enable/disable bitrot feature for particular volume. BUG: 1170075 Change-Id: Ie84002ef7f479a285688fdae99c7afa3e91b8b99 Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> Signed-off-by: Anand nekkunti <anekkunt@redhat.com> Signed-off-by: Dominic P Geevarghese <dgeevarg@redhat.com> Reviewed-on: http://review.gluster.org/9866 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* features/quota : Introducing inode quotavmallika2015-03-181-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ========================================================================== Inode quota ========================================================================== = Currently, the only way to retrieve the number of files/objects in a = = directory or volume is to do a crawl of the entire directory/volume. = = This is expensive and is not scalable. = = = = The proposed mechanism will provide an easier alternative to determine = = the count of files/objects in a directory or volume. = = = = The new mechanism proposes to store count of objects/files as part of = = an extended attribute of a directory. Each directory's extended = = attribute value will indicate the number of files/objects present = = in a tree with the directory being considered as the root of the tree. = = = = The count value can be accessed by performing a getxattr(). = = Cluster translators like afr, dht and stripe will perform aggregation = = of count values from various bricks when getxattr() happens on the key = = associated with file/object count. = A new interface is introduced: ------------------------------ limit-objects : limit the number of inodes at directory level list-objects : list the directories where the limit is set remove-objects : remove the limit from the directory ========================================================================== CLI COMMAND: gluster volume quota <volname> limit-objects <path> <number> [<percent>] * <number> is a hard-limit for number of objects limitation for path "<path>" If hard-limit is exceeded, creation of file/directory is no longer permitted. * <percent> is a soft-limit for number of objects creation for path "<path>" If soft-limit is exceeded, a warning is issued for each creation. CLI COMMAND: gluster volume quota <volname> remove-objects [path] ========================================================================== CLI COMMAND: gluster volume quota <volname> list-objects [path] ... Sample output: ------------------ Path Hard-limit Soft-limit Used Available Soft-limit exceeded? Hard-limit exceeded? ------------------------------------------------------------------------ -------------------------------------- /dir 10 80% 10 0 Yes Yes ========================================================================== [root@snapshot-28 dir]# ls a b file11 file12 file13 file14 file15 file16 file17 [root@snapshot-28 dir]# touch a1 touch: cannot touch `a1': Disk quota exceeded * Nine files are created in directory "dir" and directory is included in * the count too. Hence the limit "10" is reached and further file creation fails ========================================================================== Note: We have also done some re-factoring in cli for volume name validation. New function cli_validate_volname is created ========================================================================== Change-Id: I1823497de4f790a2a20ebb1770293472ea33ee2b BUG: 1190108 Signed-off-by: Sachin Pandit <spandit@redhat.com> Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/9769 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* features/changelog: RPC'fy {libgf}changelogVenky Shankar2015-03-182-1/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces RPC based communication between the changelog translator and libgfchangelog. It replaces the old pathetic stream based interaction that existed earlier (due to time constraints :-/). Changelog, upon initialization starts a RPC server (rpcsvc) allowing clients to invoke a probe API as a bootup mechanism to request for event notifications. During probe, clients can choose an event filter specifying the type(s) of events they are interested in. As of now there is no way to change the event notification set once the probe RPC call is made, but that is easier to implement. The actual event notifications is done on a separate RPC session. The client (libgfchangelog) itself starts and RPC server which the changelog translator "connects back" during probe. Notifications are dispatched by a bunch of threads from the server (translator) and the client optionally orders them if ordered notifications are requried. FOPs fill in their respective event details in a buffer (rot-buffs to be particular) and a bunch of threads (consumers) swap the buffers out of roatation and dispatch them via RPC. To avoid writer starvation, then number of dispatcher threads is one less than the number of buffer list in rot-buffs.x libgfchangelog becomes purely callback based -- upon event notification from the server (and re-ordering them if required) invoke a callback routine specified by consumer(s). A major part of the patch is also aimed at providing backward compatibility for geo-replication, which was one of the main consumer of the stream based API. Also, this patch does not\ "turn on" event notifications for all fops, just a bunch which is currently in requirement. Another pain point is that the server does not filter events before dispatching it to the clients. That load is taken up by the client itself (although it's done at the library layer rather than making it hard on the callback implementor). This needs improvement and care needs to be taken to not load the server up with expensive filtering mechanisms. Change-Id: Ibf60a432b68f2dfa60c6f9add2bcfd37a9c41395 BUG: 1170075 Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/9708 Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* CLI : GLobal option for NFS-GaneshaMeghana Madhusudhan2015-03-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A new global CLI option has been introduced for NFS-Ganesha. gluster features.ganesha enable/disable. This option is persistent and shall be inherited by new volumes created after this option is set. gluster features.ganesha enable It carries out the following functions: 1. Disables gluster-nfs across the cluster 2. Starts NFS-Ganesha server on a subset of nodes and exports '/'. 3. Creates the HA cluster for NFS-Ganesha. 4. Writes the option into the global config file. gluster features.ganesha disable 1. Stops NFS-Ganesha server. 2. Tears down the HA cluster for NFS-Ganesha With this change the older volume set options with keys "nfs-ganesha.host" and "nfs-ganesha.enable" will no longer be supported. This commit has only has the CLI related changes. Another patch will be submitted to support this feature entirely. Change-Id: Ie4b66a16c23b33b795738654b9a68f8e2c34efe3 BUG: 1188184 Signed-off-by: Meghana Madhusudhan <mmadhusu@redhat.com> Reviewed-on: http://review.gluster.org/9538 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* Snapshot/clone: clone of a snapshot that will act as a regular volumeMohammed Rafi KC2015-03-181-0/+1
| | | | | | | | | | | | | | | | | snapshot clone will allow us to take a snpahot of a snapshot. Newly created clone volume will be a regular volume with read/write permissions. CLI command snapshot clone <clonename> <snapname> Change-Id: Icadb993fa42fff787a330f8f49452da54e9db7de BUG: 1199894 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/9750 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* gfapi: APIs to store and process upcall notifications receivedSoumya Koduri2015-03-171-0/+13
| | | | | | | | | | | | | | | | | | | | | | | In case of any upcall cbk events received by the protocol/client, gfapi will be notified which queues them up in a list (<gfapi_cbk_upcall>). Applicatons are responsible to provide APIs to process & notify them in case of any such upcall events queued. Added a new API which will be used by Ganesha to repeatedly poll for any such upcall event notified (<glfs_h_poll_upcall>). A new test-file has been added to test the cache_invalidation upcall events. Below link has a writeup which explains the code changes done - URL: https://soumyakoduri.wordpress.com/2015/02/25/glusterfs-understanding-upcall-infrastructure-and-cache-invalidation-support/ Change-Id: Iafc6880000c865fd4da22d0cfc388ec135b5a1c5 BUG: 1200262 Signed-off-by: Soumya Koduri <skoduri@redhat.com> Reviewed-on: http://review.gluster.org/9536 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* every/where: add GF_FOP_IPC for inter-translator communicationJeff Darcy2015-03-172-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Several features - e.g. encryption, erasure codes, or NSR - involve multiple cooperating translators which sometimes need a "private" means of communication amongst themselves. Historically we've used virtual or synthetic xattrs, but that's not very elegant and clutters up the getxattr/setxattr path which must also handle real xattr requests. This new fop should address that. The only argument is an int32_t "op" which should be recognized by the target translator. It is recommended that translators using these feature follow some convention regarding the ops that they define, to avoid conflicts. Using a hash of the target translator's type string as a base for a series of ops would probably be a good start. Any other information can be passed in both directions using xdata. The default behavior for this fop, as with any other, is to pass through to FIRST_CHILD. That makes use of this fop "transparent" to other translators that were written before it existed, but it also means that it only really works with pass-through translators. If a routing translator (such as DHT) or a fan-out translator (such as AFR) is involved, the IPC might not reach its intended destination unless those translators are modified to forward IPC fops along all paths. If an IPC gets all the way to storage/posix it is considered an error, much like an uncaught exception. We don't actually *do* anything in that case, but we do log it send back an EOPNOTSUPP error. This makes the "unrecognized opcode" condition distinguishable from the "no IPC support" condition (which would yield an RPC error instead) so clients can probe for the presence of a handler for their own favorite opcode and either use that or use old-school xattrs depending on the result. BUG: 1158628 Signed-off-by: Venky Shankar <vshankar@redhat.com> Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Change-Id: I84af1b17babe5b30ec03ecf027ae37d09b873968 Reviewed-on: http://review.gluster.org/8812 Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* socket: use TCP_USER_TIMEOUT to detect client failures quickerNiels de Vos2015-03-174-9/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the network.ping-timeout to set the TCP_USER_TIMEOUT socket option (see 'man 7 tcp'). The option sets the transport.tcp-user-timeout option that is handled in the rpc/socket layer on the protocol/server side. This socket option makes detecting unclean disconnected clients more reliable. When the socket gets closed, any locks that the client held are been released. This makes it possible to reduce the fail-over time for applications that run on systems that became unreachable due to a network partition or general system error client-side (kernel panic, hang, ...). It is not trivial to create a test-case for this at the moment. We need a client that unclean disconnects and an other client that tries to take over the lock from the disconnected client. URL: http://supercolony.gluster.org/pipermail/gluster-devel/2014-May/040755.html Change-Id: I5e5f540a49abfb5f398291f1818583a63a5f4bb4 BUG: 1129787 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/8065 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: soumya k <skoduri@redhat.com> Reviewed-by: Santosh Pradhan <santosh.pradhan@gmail.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* Upcall: New xlator to store various states and send cbk eventsSoumya Koduri2015-03-173-0/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | Framework on the server-side, to handle certain state of the files accessed and send notifications to the clients connected. A generic and extensible framework, used to maintain states in the glusterfsd process for each of the files accessed (including the clients info doing the fops) and send notifications to the respective glusterfs clients incase of any change in that state. This patch handles "Inode Update/Invalidation" upcall event. Feature page: URL: http://www.gluster.org/community/documentation/index.php/Features/Upcall-infrastructure Below link has a writeup which explains the code changes done - URL: https://soumyakoduri.wordpress.com/2015/02/25/glusterfs-understanding-upcall-infrastructure-and-cache-invalidation-support/ Change-Id: Ie3d724be9a3419fcf18901a753e8ec2df2ac802f BUG: 1200262 Signed-off-by: Soumya Koduri <skoduri@redhat.com> Reviewed-on: http://review.gluster.org/9535 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* rdma:changing list iteration to safe modeMohammed Rafi KC2015-03-151-5/+10
| | | | | | | | | | | Change-Id: I2299378f02a5577a8bf2874664ba79e92c3811b5 BUG: 1201621 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/9872 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* rdma: Free resources related to iobuf in finiMohammed Rafi KC2015-03-102-0/+19
| | | | | | | | | | | | | | | | If rdma transport is destroyed because of any reason, then rdma.so will be unloaded. But we are not setting iobuf registeration function to null. After this, if an iobuf request is came, then we will try to call a function which is not loaded. Change-Id: I3293f9974e16d8e865131785ee697ea02be8cdfc BUG: 1187456 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/9697 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* rdma:enhance logging when a connection error occurMohammed Rafi KC2015-03-101-1/+3
| | | | | | | | | | | Change-Id: I6146307949a3d852d3af5f8b273004ad6b27451b BUG: 1196584 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/9756 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com> Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* rdma: return proper data type.Humble Devassy Chirammal2015-03-091-1/+1
| | | | | | | | | | Change-Id: I9bb0898af96cfcfaba0f0c976a7808bc6ea08e6a Signed-off-by: Humble Devassy Chirammal <hchiramm@redhat.com> Reviewed-on: http://review.gluster.org/9838 Reviewed-by: mohammed rafi kc <rkavunga@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com>
* cluster/ec: Add self-heal-daemon command handlersPranith Kumar K2015-03-091-14/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces the changes required in ec xlator to handle index/full heal. Index healer threads: Ec xlator start an index healer thread per local brick. This thread keeps waking up every minute to check if there are any files to be healed based on the indices kept in index directory. Whenever child_up event comes, then also this index healer thread wakes up and crawls the indices and triggers heal. When self-heal-daemon is disabled on this particular volume then the healer thread keeps waiting until it is enabled again to perform heals. Full healer threads: Ec xlator starts a full healer thread for the local subvolume provided by glusterd to perform full crawl on the directory hierarchy to perform heals. Once the crawl completes the thread exits if no more full heals are issued. Changed xl-op prefix GF_AFR_OP to GF_SHD_OP to make it more generic. Change-Id: Idf9b2735d779a6253717be064173dfde6f8f824b BUG: 1177601 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/9787 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Ravishankar N <ravishankar@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* rdma: 'list','wr' and 'new' memory has to be verified.Humble Devassy Chirammal2015-03-091-1/+22
| | | | | | | | | | | Change-Id: I29a8825107b8f4cefe4f4c59296e98fe675ee943 BUG: 1199053 Signed-off-by: Humble Devassy Chirammal <hchiramm@redhat.com> Reviewed-on: http://review.gluster.org/9811 Reviewed-by: mohammed rafi kc <rkavunga@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com>
generated by cgit (git 2.34.1) at 2024-04-28 13:30:02 +0000