summaryrefslogtreecommitdiffstats
path: root/libglusterfs/src/graph.c
Commit message (Collapse)AuthorAgeFilesLines
* glusterd/svc: update pid of mux volumes from the shd processMohammed Rafi KC2019-07-241-6/+148
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | For a normal volume, we are updating the pid from a the process while we do a daemonization or at the end of the init if it is no-daemon mode. Along with updating the pid we also lock the file, to make sure that the process is running fine. With brick mux, we were updating the pidfile from gluterd after an attach/detach request. There are two problems with this approach. 1) We are not holding a pidlock for any file other than parent process. 2) There is a chance for possible race conditions with attach/detach. For example, shd start and a volume stop could race. Let's say we are starting an shd and it is attached to a volume. While we trying to link the pid file to the running process, this would have deleted by the thread that doing a volume stop. Backport of : https://review.gluster.org/#/c/glusterfs/+/22935/ >Change-Id: I29a00352102877ce09ea3f376ca52affceb5cf1a >Updates: bz#1722541 >Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Change-Id: I29a00352102877ce09ea3f376ca52affceb5cf1a Updates: bz#1732668 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com>
* graph/shd: Use top down approach while cleaning xlatorMohammed Rafi KC2019-07-241-1/+9
| | | | | | | | | | | | | | | | | | | We were cleaning xlator from botton to top, which might lead to problems when upper xlators trying to access the xlator object loaded below. One such scenario is when fd_unref happens as part of the fini call which might lead to calling the releasedir to lower xlator. This will lead to invalid mem access Backport of:https://review.gluster.org/#/c/glusterfs/+/22968/ >Change-Id: I8a6cb619256fab0b0c01a2d564fc88287c4415a0 >Updates: bz#1716695 >Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Change-Id: I8a6cb619256fab0b0c01a2d564fc88287c4415a0 Updates: bz#1730229 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com>
* graph/shd: Use glusterfs_graph_deactivate to free the xl recMohammed Rafi KC2019-07-241-1/+1
| | | | | | | | | | | | | | | | | We were using glusterfs_graph_fini to free the xl rec from glusterfs_process_volfp as well as glusterfs_graph_cleanup. Instead we can use glusterfs_graph_deactivate, which is does fini as well as other common rec free. Backportof : https://review.gluster.org/22904 >Change-Id: Ie4a5f2771e5254aa5ed9f00c3672a6d2cc8e4bc1 >Updates: bz#1716695 >Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Change-Id: Ie4a5f2771e5254aa5ed9f00c3672a6d2cc8e4bc1 Updates: bz#1730229 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com>
* multiple files: another attempt to remove includesYaniv Kaul2019-06-141-9/+25
| | | | | | | | | | | | | | | | | | There are many include statements that are not needed. A previous more ambitious attempt failed because of *BSD plafrom (see https://review.gluster.org/#/c/glusterfs/+/21929/ ) Now trying a more conservative reduction. It does not solve all circular deps that we have, but it does reduce some of them. There is just too much to handle reasonably (dht-common.h includes dht-lock.h which includes dht-common.h ...), but it does reduce the overall number of lines of include we need to look at in the future to understand and fix the mess later one. Change-Id: I550cd001bdefb8be0fe67632f783c0ef6bee3f9f updates: bz#1193929 Signed-off-by: Yaniv Kaul <ykaul@redhat.com>
* glusterd/shd: Optimize the glustershd manager to send reconfigureMohammed Rafi KC2019-05-311-1/+0
| | | | | | | | | | | | | Traditionally all svc manager will execute process stop and then followed by start each time when they called. But that is not required by shd, because the attach request implemented in the shd multiplex has the intelligence to check whether a detach is required prior to attaching the graph. So there is no need to send an explicit detach request if we are sure that the next call is an attach request Change-Id: I9157c8dcaffdac038f73286bcf5646a3f1d3d8ec fixes: bz#1710054 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com>
* glusterfsd/cleanup: Protect graph object under a lockMohammed Rafi KC2019-05-311-24/+34
| | | | | | | | | | | While processing a cleanup_and_exit function, we are accessing a graph object. But this has not been protected under a lock. Because a parallel cleanup of a graph is quite possible which might lead to an invalid memory access Change-Id: Id05ca70d5b57e172b0401d07b6a1f5386c044e79 fixes: bz#1708926 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com>
* shd/mux: Fix coverity issues introduced by shd mux patchMohammed Rafi KC2019-04-151-8/+13
| | | | | | | | | | | | | CID 1400475: Null pointer dereferences (FORWARD_NULL) CID 1400474: Null pointer dereferences (FORWARD_NULL) CID 1400471: Code maintainability issues (UNUSED_VALUE) CID 1400470: Null pointer dereferences (FORWARD_NULL) CID 1400469: Memory - illegal accesses (USE_AFTER_FREE) CID 1400467: Code maintainability issues (UNUSED_VALUE) Change-Id: I0ca1c733be335c6e5844f44850f8066626ac40d4 updates: bz#789278 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com>
* graph.c: remove extra gettimeofday() - reuse the graph dob.Yaniv Kaul2019-04-151-17/+8
| | | | | | | | | | | | | It was written just before fill_void() call. Note that there was a possible overflow if the hostname was too long (unrelated to this patch), but it is now also fixed, as we use a smaller buffer for the hostname. This, in turn, forces us to check if gethostname() failed and add explicitly the terminating null to it. Change-Id: I45fbc0a8e105f1247f3cbf61befac06fabbaea06 updates: bz#1193929 Signed-off-by: Yaniv Kaul <ykaul@redhat.com>
* mgmt/shd: Implement multiplexing in self heal daemonMohammed Rafi KC2019-04-011-0/+451
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: Shd daemon is per node, which means they create a graph with all volumes on it. While this is a great for utilizing resources, it is so good in terms of performance and managebility. Because self-heal daemons doesn't have capability to automatically reconfigure their graphs. So each time when any configurations changes happens to the volumes(replicate/disperse), we need to restart shd to bring the changes into the graph. Because of this all on going heal for all other volumes has to be stopped in the middle, and need to restart all over again. Solution: This changes makes shd as a per volume daemon, so that the graph will be generated for each volumes. When we want to start/reconfigure shd for a volume, we first search for an existing shd running on the node, if there is none, we will start a new process. If already a daemon is running for shd, then we will simply detach a graph for a volume and reatach the updated graph for the volume. This won't touch any of the on going operations for any other volumes on the shd daemon. Example of an shd graph when it is per volume graph ----------------------- | debug-iostat | ----------------------- / | \ / | \ --------- --------- ---------- | AFR-1 | | AFR-2 | | AFR-3 | -------- --------- ---------- A running shd daemon with 3 volumes will be like--> graph ----------------------- | debug-iostat | ----------------------- / | \ / | \ ------------ ------------ ------------ | volume-1 | | volume-2 | | volume-3 | ------------ ------------ ------------ Change-Id: Idcb2698be3eeb95beaac47125565c93370afbd99 fixes: bz#1659708 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com>
* core: move logs which are only developer relevant to DEBUG levelAmar Tumballi2019-01-231-1/+1
| | | | | | | | | | | We had only changed the log level to DEBUG in release branch earlier. But considering 90%+ of our deployments happen in same env, we can look at these specific logs on need basis. With this change, the master branch will be easier to debug with lesser logs. Change-Id: I4157a7ec7d5ec9c2948b2bbc1e4cb8317f28d6b8 Updates: bz#1666833 Signed-off-by: Amar Tumballi <amarts@redhat.com>
* core: Resolve dict_leak at the time of destroying graphMohit Agrawal2019-01-141-1/+1
| | | | | | | | | | | | Problem: In gluster code some of the places it call's get_new_dict to create a dictionary without taking reference so at the time of dict_unref it has become a leak Solution: To resolve the same call dict_new instead of get_new_dict updates bz#1650403 Change-Id: I3ccbbf5af07079a4fa09aad2cd0458c8625b2f06 Signed-off-by: Mohit Agrawal <moagrawal@redhat.com>
* libglusterfs: Move devel headers under glusterfs directoryShyamsundarR2018-12-051-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | libglusterfs devel package headers are referenced in code using include semantics for a program, this while it works can be better especially when dealing with out of tree xlator builds or in general out of tree devel package usage. Towards this, the following changes are done, - moved all devel headers under a glusterfs directory - Included these headers using system header notation <> in all code outside of libglusterfs - Included these headers using own program notation "" within libglusterfs This change although big, is just moving around the headers and making it correct when including these headers from other sources. This helps us correctly include libglusterfs includes without namespace conflicts. Change-Id: Id2a98854e671a7ee5d73be44da5ba1a74252423b Updates: bz#1193929 Signed-off-by: ShyamsundarR <srangana@redhat.com>
* Land part 2 of clang-format changesGluster Ant2018-09-121-881/+867
| | | | | Change-Id: Ia84cc24c8924e6d22d02ac15f611c10e26db99b4 Signed-off-by: Nigel Babu <nigelb@redhat.com>
* coverity: Multiple coverity fixes for issues with HIGH severityShyamsundarR2018-08-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | glfs-fops.c 1391414 Uninitialized pointer read List head needed initialization glusterfsd-mgmt.c graph.c 1382431 Buffer not null terminated 1382417 Dereference before null check 1382347 Buffer not null terminated Cleaned usage of volfile_checksum member of gf_volfile_t struct across the code base. glusterd-tier.c 1382426 Resource leak 1370955 Dereference before null check The function fixed needs more work, but with tier almost being deprecated, addressed some parts of the reported coverity issues as appropriate. Tested using the following test cases: ./tests/basic/tier/new-tier-cmds.t ./tests/basic/tier/tier.t ./tests/basic/tier/bug-1214222-directories_missing_after_attach_tier.t ./tests/basic/tier/tier_lookup_heal.t ./tests/basic/tier/tier-heald.t ./tests/basic/tier/tier-snapshot.t ./tests/features/glfs-lease.t Change-Id: I396f1c34bb112bb22d2745ed279e1a4850cac4af Updates: bz#789278 Signed-off-by: ShyamsundarR <srangana@redhat.com>
* libglusterfs/src/graph.c: Move to GF_MALLOC() instead of GF_CALLOC() when ↵Yaniv Kaul2018-08-221-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | possible It doesn't make sense to calloc (allocate and clear) memory when the code right away fills that memory with data. It may be optimized by the compiler, or have a microscopic performance improvement. In some cases, also changed allocation size to be sizeof some struct or type instead of a pointer - easier to read. In some cases, removed redundant strlen() calls by saving the result into a variable. 1. Only done for the straightforward cases. There's room for improvement. 2. Please review carefully, especially for string allocation, with the terminating NULL string. Only compile-tested! updates: bz#1193929 Signed-off-by: Yaniv Kaul <ykaul@redhat.com> Change-Id: Icd990423a5e6048e76922668aab67422f4bc1867
* coverity: libglusterfs issuesAmar Tumballi2018-08-191-1/+1
| | | | | | | | | CID: 1391415, 1274122, 1274201, 1382408, 1382437, 1389436 1288798, 1288106, 1288110 updates: bz#789278 Change-Id: I48c7a50f22f5f4580310040c66463d9f7dd26204 Signed-off-by: Amar Tumballi <amarts@redhat.com>
* libglusterfs: Fix a resource leak in graph.cVijay Bellur2018-08-131-0/+1
| | | | | | | | Fixes CID 1382367 Change-Id: I02678fc71716ab0046ea2ef437c6594a8a34a4fc updates: bz#789278 Signed-off-by: Vijay Bellur <vbellur@redhat.com>
* coverity: Ignore most of SECURE_TEMP issuesShyamsundarR2018-07-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | mkstemp as per the Linux man page, uses 0600 as the permission bits when creating the file. This is hence safe and a Coverity warning that should be ignored. Further, we are mostly a multi-threaded program in all our daemons and cannot set and unset umask at will in a multi-threaded program, to address the coverity issue. This change attempts to nudge coverity to ignore this warning, using the pattern, /* coverity[EVENT_TAG_NAME] ... */ <line of code that has the issue> This commit is an experiment, if post merge the next coverity report ignores these errors, the above pattern (as found using an internet search) works and can be applied to certain other warnings as well. Change-Id: I73a184ce1a54dd9e66542952b1190a74438c826a Updates: bz#789278 Signed-off-by: ShyamsundarR <srangana@redhat.com>
* gluster: Sometimes Brick process is crashed at the time of stopping brickMohit Agrawal2018-04-191-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | Problem: Sometimes brick process is getting crashed at the time of stop brick while brick mux is enabled. Solution: Brick process was getting crashed because of rpc connection was not cleaning properly while brick mux is enabled.In this patch after sending GF_EVENT_CLEANUP notification to xlator(server) waits for all rpc client connection destroy for specific xlator.Once rpc connections are destroyed in server_rpc_notify for all associated client for that brick then call xlator_mem_cleanup for for brick xlator as well as all child xlators.To avoid races at the time of cleanup introduce two new flags at each xlator cleanup_starting, call_cleanup. BUG: 1544090 Signed-off-by: Mohit Agrawal <moagrawa@redhat.com> Note: Run all test-cases in separate build (https://review.gluster.org/#/c/19700/) with same patch after enable brick mux forcefully, all test cases are passed. Change-Id: Ic4ab9c128df282d146cf1135640281fcb31997bf updates: bz#1544090
* glusterd: TLS verification fails while using intermediate CAMohit Agrawal2018-03-191-1/+41
| | | | | | | | | | | | | | | | | | | | | Problem: TLS verification fails while using intermediate CA if mgmt SSL is enabled. Solution: There are two main issue of TLS verification failing 1) not calling ssl_api to set cert_depth 2) The current code does not allow to set certificate depth while MGMT SSL is enabled. After apply this patch to set certificate depth user need to set parameter option transport.socket.ssl-cert-depth <depth> in /var/lib/glusterd/secure_acccess instead to set in /etc/glusterfs/glusterd.vol. At the time of set secure_mgmt in ctx we will check the value of cert-depth and save the value of cert-depth in ctx.If user does not provide any value in cert-depth in that case it will consider default value is 1 BUG: 1555154 Change-Id: I89e9a9e1026e37efb5c20f9ec62b1989ef644f35 Signed-off-by: Mohit Agrawal <moagrawa@redhat.com>
* libglusterfs: Fix coverity issue FORWARD_NULLPoornima G2018-03-021-7/+4
| | | | | Change-Id: I1402046edb232ca9d23346db82a0cfd041c91e70 Signed-off-by: Poornima G <pgurusid@redhat.com>
* mgtm/core : use sha hash function for volfile checkMohammed Rafi KC2017-07-101-8/+121
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We are storing the entire volfile and using this to check volfile change. With brick multiplexing there will be lot of graphs per process which will increase the memory foot print of the process. So instead of storing the entire graph we could use sha256 and we can compare the hash to see whether volfile change happened or not. Also with Brick multiplexing, the direct comparison of vol file is not correct. There are two problems. Problem 1: We are currently storing one single graph (the last updated volfile) whereas, what we need is the entire graph with all atttached bricks. If we fix this issue, we have second problem Problem 2: With multiplexing we have a graph that contains multiple bricks. But what we are checking as part of the reconfigure is, comparing the entire graph with one single graph, which will always fail. Solution: We create list in glusterfs_ctx_t that stores sha256 hash of individual brick graphs. When a graph changes happens we compare the stored hash and the current hash. If the hash matches, then no need for reconfigure. Otherwise we first do the reconfigure and then update the hash. For now, gfapi has not changed this way. Meaning when gfapi volfile fetch or reconfigure happens, we still store the entire graph and compare, each memory. This is fine, because libgfapi will not load brick graphs. But changing the libgfapi will make the code similar in both glusterfsd-mgmt and api. Also it helps to reduce some memory. Change-Id: I9df917a771a52b95622ab8f63af34ec390163a77 BUG: 1467986 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: https://review.gluster.org/17709 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Amar Tumballi <amarts@redhat.com>
* glusterfsd: send PARENT_UP on brick attachAtin Mukherjee2017-05-141-2/+3
| | | | | | | | | | | | | | | | With brick multiplexing being enabled, if a brick is instance attached to a process then a PARENT_UP event is needed so that it reaches right till posix layer and then from posix CHILD_UP event is sent back to all the children. Change-Id: Ic341086adb3bbbde0342af518e1b273dd2f669b9 BUG: 1447389 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: https://review.gluster.org/17225 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us>
* libglusterfs/graph: fix potential endless loop in options validate workZhou Zhengping2017-05-091-1/+3
| | | | | | | | | | | | Change-Id: Icb71ded6051afe44e07480e0499d2a39f05fac71 BUG: 1447826 Signed-off-by: Zhou Zhengping <johnzzpcrystal@gmail.com> Reviewed-on: https://review.gluster.org/17171 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Amar Tumballi <amarts@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* libglusterfs: accept random volname in glusterfs_graph_prepare()Niels de Vos2017-04-261-27/+52
| | | | | | | | | | | | | | | | | | When the call to glfs_new("volname") passes a name for the volume and it does not match the name of the subvolume in the graph, glfs_init() will fail. This is easily reproducible by a gfapi program that loads the volume from a .vol file, and not from a GlusterD server. Change-Id: I33e77fbee7d12eaefe7c384fad6aecfa3582ea5a BUG: 1425623 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: https://review.gluster.org/16796 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Prashanth Pai <ppai@redhat.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* glusterfsd+libglusterfs: add null checks during attachJeff Darcy2017-03-091-0/+4
| | | | | | | | | | | | | | | | It's possible (though unlikely) that we could get a brick-attach request while we're not ready to process it (ctx->active not set yet). Add code to guard against this possibility, and return appropriate error indicators. Change-Id: Icb3bc52ce749258a3f03cbbbdf4c2320c5c541a0 BUG: 1430860 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: https://review.gluster.org/16883 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* libglusterfs: Fix a crash due to race between inode_ctx_set and inode_refPoornima G2017-02-191-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Issue: Currently inode ref count is gaurded by inode_table->lock, and inode_ctx is gauarded by inode->lock. With the new patch [1] inode_ref was modified to change the inode_ctx to track the ref count per xlator. Thus inode_ref performed under inode_table->lock is modifying inode_ctx which has to be modified only under inode->lock Solution: When a inode is created, inode_ctx holder is allocated for all the xlators. Hence in case of inode_ctx_set instead of using the first free index in inode ctx holder, we can have predecided index for every xlator in the graph. Credits Pranith K <pkarampu@redhat.com> [1] http://review.gluster.org/13736 Change-Id: I1bfe111c211fcc4fcd761bba01dc87c4c69b5170 BUG: 1423373 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: https://review.gluster.org/16622 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* libglusterfs+changetimerecorder: reduce log noiseJeff Darcy2017-02-101-1/+1
| | | | | | | | | | | | | | | The logging about translator options is so verbose that it significantly slows down scalability tests - sometimes even to the point where it induces timing-related failures. Quiet, please. Change-Id: If0766e2a80746bba586e67e6019ff7084d68b425 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: https://review.gluster.org/16569 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> Reviewed-by: Milind Changire <mchangir@redhat.com>
* core: run many bricks within one glusterfsd processJeff Darcy2017-01-301-14/+113
| | | | | | | | | | | | | | | | | | | | | | | This patch adds support for multiple brick translator stacks running in a single brick server process. This reduces our per-brick memory usage by approximately 3x, and our appetite for TCP ports even more. It also creates potential to avoid process/thread thrashing, and to improve QoS by scheduling more carefully across the bricks, but realizing that potential will require further work. Multiplexing is controlled by the "cluster.brick-multiplex" global option. By default it's off, and bricks are started in separate processes as before. If multiplexing is enabled, then *compatible* bricks (mostly those with the same transport options) will be started in the same process. Change-Id: I45059454e51d6f4cbb29a4953359c09a408695cb BUG: 1385758 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: https://review.gluster.org/14763 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* quotad: fix potential buffer overflowsRaghavendra G2016-08-251-3/+6
| | | | | | | | | | | | | | | | | | | This converts sprintf to gf_asprintf in following components: * quotad.c * dht * afr * protocol/client * rpc/rpc-lib * rpc/rpc-transport Change-Id: If8a267bab3d91003bdef3a92664077a0136745ee BUG: 1332073 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/14102 Tested-by: Manikandan Selvaganesh <mselvaga@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Manikandan Selvaganesh <mselvaga@redhat.com>
* core: use syscall wrappers instead of direct syscalls - libglusterfsKaleb S. KEITHLEY2015-11-161-2/+3
| | | | | | | | | | | | | | | | various xlators and other components are invoking system calls directly instead of using the libglusterfs/syscall.[ch] wrappers. If not using the system call wrappers there should be a comment in the source explaining why the wrapper isn't used. Change-Id: Ieeca2d36adbc884e4cfa0026dba40df70310d40b BUG: 1267967 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/12275 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* graph/libglusterfs : porting to a new logging frameworkMohamed Ashiq2015-06-251-50/+63
| | | | | | | | | Change-Id: I57ed5c979c15559443712a61f0b1a61c7f5557d8 BUG: 1194640 Signed-off-by: Mohamed Ashiq <ashiq333@gmail.com> Reviewed-on: http://review.gluster.org/10822 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* libglusterfs: Fixing insecure temp file coverity issueNandaja Varma2015-06-121-2/+28
| | | | | | | | | | | | | Coverity CID: 1124835 Change-Id: I7e87f2b3bad35cf8a9c64c8502de23662d9f677f BUG: 789278 Signed-off-by: Nandaja Varma <nvarma@redhat.com> Reviewed-on: http://review.gluster.org/9565 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Sakshi Bansal Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Prashanth Pai <ppai@redhat.com>
* build: do not #include "config.h" in each fileNiels de Vos2015-05-291-5/+0
| | | | | | | | | | | | | | | | | | Instead of including config.h in each file, and have the additional config.h included from the compiler commandline (-include option). When a .c file tests for a certain #define, and config.h was not included, incorrect assumtions were made. With this change, it can not happen again. BUG: 1222319 Change-Id: I4f9097b8740b81ecfe8b218d52ca50361f74cb64 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/10808 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* cluster/dht: Change the subvolume encoding in d_off to be a "global"Dan Lambright2015-03-181-1/+124
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | position in the graph rather than relative (local) to a particular translator. Encoding the volume in this way allows a single translator to manage which brick is currently being scanned for directory entries. Using a single translator minimizes allocated bits in the d_off. It also allows multiple DHT translators in the same graph to have a common frame of reference (the graph position) for which brick is being read. Multiple DHT translators are needed for the Tiering feature. The fix builds off a previous change (9332) which removed subvolume encoding from AFR. The fix makes an equivalent change to the EC translator. More background can be found in fix 9332 and gluster-dev discussions [1]. DHT and AFR/EC are responsibile (as before) for choosing which brick to enumerate directory entries in over the readdir lifecycle. The client translator receiving the readdir fop encodes the dht_t. It is referred to as the "leaf node" in the graph and corresponds to the brick being scanned. When DHT decodes the d_off, it translates the leaf node to a local subvolume, which represents the next node in the graph leading to the brick. Tracking of leaf nodes is done in common utility functions. Leaf nodes counts and positional information are updated on a graph switch. [1] www.gluster.org/pipermail/gluster-devel/2015-January/043592.html Change-Id: Iaf0ea86d7046b1ceadbad69d88707b243077ebc8 BUG: 1190734 Signed-off-by: Dan Lambright <dlambrig@redhat.com> Reviewed-on: http://review.gluster.org/9688 Reviewed-by: Xavier Hernandez <xhernandez@datalab.es> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* libglusterfs: Add functions for xlator and graph cleanup.Poornima G2015-03-021-4/+56
| | | | | | | | | | Change-Id: If341e3c0a559aa5bbca9c1263a241c6592c59706 BUG: 1093594 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/9696 Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* libgfapi: Wait for GF_EVENT_CHILD_DOWN in glfs_fini()Anoop C S2014-12-081-5/+5
| | | | | | | | | | | | | | | | | | | | | | Whenever glfs_fini() is being called, currently no check is made inside the function to determine whether the child is already down or not. This patch will wait for GF_EVENT_CHILD_DOWN for the active subvol and then exits. TBD: Apart from the active subvol, wait for other CHILD_DOWN events generated through operations like volume set in future. Change-Id: I81c64ac07b463bfed48bf306f9e8f46ba0f0a76f BUG: 1153610 Signed-off-by: Anoop C S <achiraya@redhat.com> Reviewed-on: http://review.gluster.org/9060 Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* meta: (re-)Implement Meta translatorAnand Avati2014-05-051-0/+25
| | | | | | | | | | | | | | | | | The meta translator exposes details about glusterfs itself in the form of a virtual namespace. Loading the translator on the client side creates the meta virtual view under $mntpoint/.meta by default. The directory is not listed (even with ls -a) and can be accessed by doing a "cd /mnt/.meta" Change-Id: I5ffdf39203841a9562a8280a1f79dc76d4dded5d BUG: 1089216 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/7509 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Harshavardhana <harsha@harshavardhana.net>
* common-utils: new dirent compatible time fmtAnand Avati2014-04-201-1/+1
| | | | | | | | | | | | Introduce a new time format without "/" and spaces, in order to be used in (virtual) filenames. Change-Id: I468be54f1ec7f45265add4c458e19d95567439f7 BUG: 1089216 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/7507 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* glusterfsd, libgfapi: destroy the temporary graphs constructed for comparisonRaghavendra Bhat2013-10-031-0/+185
| | | | | | | | | | | | | | * The new and the oldgraphs which have been constructed whenever there is a volfile change (either reconfigure of the existing graph or creating a new graph) for comparison should be freed. Otherwise frequent graph changes will lead to huge memory leak Change-Id: I4faddb1aa9393b34cd2de6732e537a60f600026a BUG: 948178 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/5388 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* core: changes to support gfid-accessAmar Tumballi2013-08-211-0/+23
| | | | | | | | | Change-Id: I38d2fdc47e4b805deafca6805e54807976ffdb7e Signed-off-by: Amar Tumballi <amarts@redhat.com> BUG: 952029 Reviewed-on: http://review.gluster.org/5496 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* debug/trace: save the recent fops received in the event-historyRaghavendra Bhat2013-01-171-4/+7
| | | | | | | | | | | | | | | | | * Make use of event-history in debug/trace xlator to dump the recent fops, when statedump is given. trace xlator saves the fop it received along with the time in the event-history and upon statedump signal, dumps its history. The size of the event-history can be given as a xlator option. * Make changes in trace to take logging into log-file or logging to history as an option. By default both are off. Change-Id: I12baee5805c6efb55735cead4e2093fb94d7a6a0 BUG: 797171 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/4088 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* libglusterfs/graph: pass correct translator pairs during reconfigureRaghavendra G2012-09-211-8/+17
| | | | | | | | | | | | | | | | | when we autoload xlators like acl, worm or mac-compatibility, they will be loaded on top of old graph. However, corresponding ones won't be present in new graph, since newgraph doesn't contain autoloaded translators. While passing xlator pairs to reconfigure, this fact should be accounted and correct xlator pairs should be passed instead of blindly passing oldgraph->first and newgraph->first. Signed-off-by: Raghavendra G <raghavendra@gluster.com> Change-Id: I8f4fe37b7e26dc2dcae78c1fe0d4a04f8ab84ed0 BUG: 857874 Reviewed-on: http://review.gluster.org/3949 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* libglusterfs/dict: make 'dict_t' a opaque objectAmar Tumballi2012-09-061-2/+2
| | | | | | | | | | | | | | | * ie, don't dereference dict_t pointer, instead use APIs everywhere * other than dict_t only 'data_t' should be the valid export from dict.h * added 'dict_foreach_fnmatch()' API * changed dict_lookup() to use data_t, instead of data_pair_t Change-Id: I400bb0dd55519a7c5d2a107e67c8e7a7207228dc Signed-off-by: Amar Tumballi <amarts@redhat.com> BUG: 850917 Reviewed-on: http://review.gluster.org/3829 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* localtime and ctime are not MT-SAFEKaleb S. KEITHLEY2012-06-291-10/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are a number of nit-level issues throughout the source with the use of localtime and ctime. While they apparently aren't causing too many problems, apart from the one in bz 828058, they ought to be fixed. Among the "real" problems that are fixed in this patch: 1) general localtime and ctime not MT-SAFE. There's a non-zero chance that another thread calling localtime (or ctime) will over-write the static data about to be used in another thread 2) localtime(& <64-bit-type>) or ctime(& <64-bit-type>) generally not a problem on 64-bit or little-endian 32-bit. But even though we probably have zero users on big-ending 32-bit platforms, it's still incorrect. 3) multiple nested calls passed as params. Last one wins, i.e. over- writes result of prior calls. 4) Inconsistent error handling. Most of these calls are for logging, tracing, or dumping. I submit that if an error somehow occurs in the call to localtime or ctime, the log/trace/dump still should still occur. 5) Appliances should all have their clocks set to UTC, and all log entries, traces, and dumps should use GMT. 6) fix strtok(), change to strtok_r() Other things this patch fixes/changes (that aren't bugs per se): 1) Change "%Y-%m-%d %H:%M:%S" and similar to their equivalent shorthand, e.g. "%F %T" 2) change sizeof(timestr) to sizeof timestr. sizeof is an operator, not a function. You don't use i +(32), why use sizeof(<var>). (And yes, you do use parens with sizeof(<type>).) 3) change 'char timestr[256]' to 'char timestr[32]' where appropriate. Per-thread stack is limited. Time strings are never longer than ~20 characters, so why waste 220+ bytes on the stack? Things this patch doesn't fix: 1) hodgepodge of %Y-%m-%d %H:%M:%S versus %Y/%m/%d-%H%M%S and other variations. It's not clear to me whether this ever matters, not to mention 3rd party log filtering tools may already rely on a particular format. Still it would be nice to have a single manifest constant and have every call to localtime/strftime consistently use the same format. Change-Id: I827cad7bf53e57b69c0173f67abe72884249c1a9 BUG: 832173 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.com/3568 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* license: dual license under GPLV2 and LGPLV3+Kaleb KEITHLEY2012-05-101-14/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Note that the license was not changed in any of the following: .../argp-standalone/... .../booster/... .../cli/... .../contrib/... .../extras/... .../glusterfsd/... .../glusterfs-hadoop/... .../mod_clusterfs/... .../scheduler/... .../swift/... The license was not changed in any of the non-building xlators. The license was not changed in any of the xlators that seemed — to me — to be clearly server-side only, e.g. protocol/server Note too that copyright was changed along with the license; I did not change the copyright in files where the license did not change. If you find any errors or ommissions please don't hesitate to let me know. The complete list of files with the license change is: libglusterfs/src/byte-order.h libglusterfs/src/call-stub.c libglusterfs/src/call-stub.h libglusterfs/src/checksum.c libglusterfs/src/checksum.h libglusterfs/src/circ-buff.c libglusterfs/src/circ-buff.h libglusterfs/src/common-utils.c libglusterfs/src/common-utils.h libglusterfs/src/compat-errno.c libglusterfs/src/compat-errno.h libglusterfs/src/compat.c libglusterfs/src/compat.h libglusterfs/src/daemon.c libglusterfs/src/daemon.h libglusterfs/src/defaults.c libglusterfs/src/defaults.h libglusterfs/src/dict.c libglusterfs/src/dict.h libglusterfs/src/event-history.c libglusterfs/src/event-history.h libglusterfs/src/event.c libglusterfs/src/event.h libglusterfs/src/fd-lk.c libglusterfs/src/fd-lk.h libglusterfs/src/fd.c libglusterfs/src/fd.h libglusterfs/src/gf-dirent.c libglusterfs/src/gf-dirent.h libglusterfs/src/globals.c libglusterfs/src/globals.h libglusterfs/src/glusterfs.h libglusterfs/src/graph-print.c libglusterfs/src/graph-utils.h libglusterfs/src/graph.c libglusterfs/src/hashfn.c libglusterfs/src/hashfn.h libglusterfs/src/iatt.h libglusterfs/src/inode.c libglusterfs/src/inode.h libglusterfs/src/iobuf.c libglusterfs/src/iobuf.h libglusterfs/src/latency.c libglusterfs/src/latency.h libglusterfs/src/list.h libglusterfs/src/lkowner.h libglusterfs/src/locking.h libglusterfs/src/logging.c libglusterfs/src/logging.h libglusterfs/src/mem-pool.c libglusterfs/src/mem-pool.h libglusterfs/src/mem-types.h libglusterfs/src/options.c libglusterfs/src/options.h libglusterfs/src/rbthash.c libglusterfs/src/rbthash.h libglusterfs/src/run.c libglusterfs/src/run.h libglusterfs/src/scheduler.c libglusterfs/src/scheduler.h libglusterfs/src/stack.c libglusterfs/src/stack.h libglusterfs/src/statedump.c libglusterfs/src/statedump.h libglusterfs/src/syncop.c libglusterfs/src/syncop.h libglusterfs/src/syscall.c libglusterfs/src/syscall.h libglusterfs/src/timer.c libglusterfs/src/timer.h libglusterfs/src/trie.c libglusterfs/src/trie.h libglusterfs/src/xlator.c libglusterfs/src/xlator.h libglusterfsclient/src/libglusterfsclient-dentry.c libglusterfsclient/src/libglusterfsclient-internals.h libglusterfsclient/src/libglusterfsclient.c libglusterfsclient/src/libglusterfsclient.h rpc/rpc-lib/src/auth-glusterfs.c rpc/rpc-lib/src/auth-null.c rpc/rpc-lib/src/auth-unix.c rpc/rpc-lib/src/protocol-common.h rpc/rpc-lib/src/rpc-clnt.c rpc/rpc-lib/src/rpc-clnt.h rpc/rpc-lib/src/rpc-transport.c rpc/rpc-lib/src/rpc-transport.h rpc/rpc-lib/src/rpcsvc-auth.c rpc/rpc-lib/src/rpcsvc-common.h rpc/rpc-lib/src/rpcsvc.c rpc/rpc-lib/src/rpcsvc.h rpc/rpc-lib/src/xdr-common.h rpc/rpc-lib/src/xdr-rpc.c rpc/rpc-lib/src/xdr-rpc.h rpc/rpc-lib/src/xdr-rpcclnt.c rpc/rpc-lib/src/xdr-rpcclnt.h rpc/rpc-transport/rdma/src/name.c rpc/rpc-transport/rdma/src/name.h rpc/rpc-transport/rdma/src/rdma.c rpc/rpc-transport/rdma/src/rdma.h rpc/rpc-transport/socket/src/name.c rpc/rpc-transport/socket/src/name.h rpc/rpc-transport/socket/src/socket.c rpc/rpc-transport/socket/src/socket.h xlators/cluster/afr/src/afr-common.c xlators/cluster/afr/src/afr-dir-read.c xlators/cluster/afr/src/afr-dir-read.h xlators/cluster/afr/src/afr-dir-write.c xlators/cluster/afr/src/afr-dir-write.h xlators/cluster/afr/src/afr-inode-read.c xlators/cluster/afr/src/afr-inode-read.h xlators/cluster/afr/src/afr-inode-write.c xlators/cluster/afr/src/afr-inode-write.h xlators/cluster/afr/src/afr-lk-common.c xlators/cluster/afr/src/afr-mem-types.h xlators/cluster/afr/src/afr-open.c xlators/cluster/afr/src/afr-self-heal-algorithm.c xlators/cluster/afr/src/afr-self-heal-algorithm.h xlators/cluster/afr/src/afr-self-heal-common.c xlators/cluster/afr/src/afr-self-heal-common.h xlators/cluster/afr/src/afr-self-heal-data.c xlators/cluster/afr/src/afr-self-heal-entry.c xlators/cluster/afr/src/afr-self-heal-metadata.c xlators/cluster/afr/src/afr-self-heal.h xlators/cluster/afr/src/afr-self-heald.c xlators/cluster/afr/src/afr-self-heald.h xlators/cluster/afr/src/afr-transaction.c xlators/cluster/afr/src/afr-transaction.h xlators/cluster/afr/src/afr.c xlators/cluster/afr/src/afr.h xlators/cluster/afr/src/pump.c xlators/cluster/afr/src/pump.h xlators/cluster/dht/src/dht-common.c xlators/cluster/dht/src/dht-common.h xlators/cluster/dht/src/dht-diskusage.c xlators/cluster/dht/src/dht-hashfn.c xlators/cluster/dht/src/dht-helper.c xlators/cluster/dht/src/dht-inode-read.c xlators/cluster/dht/src/dht-inode-write.c xlators/cluster/dht/src/dht-layout.c xlators/cluster/dht/src/dht-linkfile.c xlators/cluster/dht/src/dht-mem-types.h xlators/cluster/dht/src/dht-rebalance.c xlators/cluster/dht/src/dht-rename.c xlators/cluster/dht/src/dht-selfheal.c xlators/cluster/dht/src/dht.c xlators/cluster/dht/src/nufa.c xlators/cluster/dht/src/switch.c xlators/cluster/stripe/src/stripe-helpers.c xlators/cluster/stripe/src/stripe-mem-types.h xlators/cluster/stripe/src/stripe.c xlators/cluster/stripe/src/stripe.h xlators/features/index/src/index-mem-types.h ¹ xlators/features/index/src/index.c ¹ xlators/features/index/src/index.h ¹ xlators/performance/io-cache/src/io-cache.c xlators/performance/io-cache/src/io-cache.h xlators/performance/io-cache/src/ioc-inode.c xlators/performance/io-cache/src/ioc-mem-types.h xlators/performance/io-cache/src/page.c xlators/performance/io-threads/src/io-threads.c xlators/performance/io-threads/src/io-threads.h xlators/performance/io-threads/src/iot-mem-types.h xlators/performance/md-cache/src/md-cache-mem-types.h xlators/performance/md-cache/src/md-cache.c xlators/performance/quick-read/src/quick-read-mem-types.h xlators/performance/quick-read/src/quick-read.c xlators/performance/quick-read/src/quick-read.h xlators/performance/read-ahead/src/page.c xlators/performance/read-ahead/src/read-ahead-mem-types.h xlators/performance/read-ahead/src/read-ahead.c xlators/performance/read-ahead/src/read-ahead.h xlators/performance/symlink-cache/src/symlink-cache.c xlators/performance/write-behind/src/write-behind-mem-types.h xlators/performance/write-behind/src/write-behind.c xlators/protocol/auth/addr/src/addr.c ¹ xlators/protocol/auth/login/src/login.c ¹ xlators/protocol/client/src/client-callback.c xlators/protocol/client/src/client-handshake.c xlators/protocol/client/src/client-helpers.c xlators/protocol/client/src/client-lk.c xlators/protocol/client/src/client-mem-types.h xlators/protocol/client/src/client.c xlators/protocol/client/src/client.h xlators/protocol/client/src/client3_1-fops.c ¹ Copyright only, license reverted to original Change-Id: If560e826c61b6b26f8b9af7bed6e4bcbaeba31a8 BUG: 820551 Signed-off-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.com/3304 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vijay@gluster.com>
* fuse: enable kernel read-only modeKaushal M2011-11-221-25/+0
| | | | | | | | | | | | | Enables kernel read-only mode on mounting with '-oro' and disables the gluster read-only translator from being loaded. As a result, '-oro' is reported correctly in the mount options. Change-Id: If94d97836b13668974cfac61b6e5d52e19880e10 BUG: 3742 Reviewed-on: http://review.gluster.com/655 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-by: Csaba Henk <csaba@gluster.com>
* Eliminate many "var set but not used" warnings with newer gcc.Jeff Darcy2011-09-071-4/+0
| | | | | | | | | | | | | | | | This fixes ~200 such warnings, but leaves three categories untouched. (1) Rpcgen code. (2) Macros which set variables in the outer (calling function) scope. (3) Variables which are set via function calls which may have side effects. Change-Id: I6554555f78ed26134251504b038da7e94adacbcd BUG: 2550 Reviewed-on: http://review.gluster.com/371 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@gluster.com>
* xlator options: revamp xlator option validation/reconfigure codeAnand Avati2011-08-181-55/+29
| | | | | | | | | | | | | | | | | - move option handling to options.c (new file) - remove duplication of option validation code - remove duplication of gf_log / sprintf - get rid of xlator_t->validate_options - get rid of option validation in rpc-transport - get rid of validate_options() in every xlator - use xlator_volume_option_get to clean up many functions - introduce primitives to init/reconfigure option types Change-Id: I51798af72c8dc0a2b9e017424036eb3667dfc7ff BUG: 3415 Reviewed-on: http://review.gluster.com/235 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@gluster.com>
* WORM: Write Once Read Many times xlator supportshishir2011-08-101-0/+21
| | | | | | | | | | | | This xlator will allow files to be opened for write in append mode only. Mount with --worm(glusterfs) or -o worm (mount) option to enable worm xlator Change-Id: I1be02fcf2aee2182ea2c66b514357918136fabeb BUG: 3166 Reviewed-on: http://review.gluster.com/23 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@gluster.com>
generated by cgit (git 2.34.1) at 2024-06-02 20:57:00 +0000