summaryrefslogtreecommitdiffstats
path: root/libglusterfs/src/glusterfs.h
Commit message (Collapse)AuthorAgeFilesLines
* dht: make lookup-unhashed=auto do something actually usefulJeff Darcy2015-05-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | The key concept here is to determine whether a directory is "clean" by comparing its last-known-good topology to the current one for the volume. These are stored as "commit hashes" on the directory and the volume root respectively. The volume's commit hash changes whenever a brick is added or removed, and a fix-layout is done. A directory's commit hash changes only when a full rebalance (not just fix-layout) is done on it. If all bricks are present and have a directory commit hash that matches the volume commit hash, then we can assume that every file is in its "proper" place. Therefore, if we look for a file in that proper place and don't find it, we can assume it's not on any other subvolume and *safely* skip the global (broadcast to all) lookup. Change-Id: Id6ce4593ba1f7daffa74cfab591cb45960629ae3 BUG: 1219637 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Signed-off-by: Shyam <srangana@redhat.com> Reviewed-on: http://review.gluster.org/7702 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/afr : Prevent inode-evict during split-brain resolutionAnuradha2015-05-071-0/+1
| | | | | | | | | | | | | | | | | | | | | 1) Provided setfattr command to set timeout for split-brain choice. 2) If split-brain inspection/resolution is being done from the mount for a file, ref the inode when split-brain-choice is set. This inode will be unconditionally unref-ed after timeout seconds set by the user/default otherwise. 3) Updated the doc and testcase to reflect the changes. Change-Id: I15c9037dee28855f21e680e7e3632e1f48dba4e1 BUG: 1209104 Signed-off-by: Anuradha <atalur@redhat.com> Reviewed-on: http://review.gluster.org/10134 Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-by: Ravishankar N <ravishankar@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* glusterd: remove replace brick with data migration support form cli/glusterdGaurav Kumar Garg2015-05-071-1/+0
| | | | | | | | | | | | | | | | Replace-brick operation with data migration support have been deprecated from gluster. With this fix replace brick command will support only one commad gluster volume replace-brick <VOLNAME> <SOURCE-BRICK> <NEW-BRICK> {commit force} Change-Id: Ib81d49e5d8e7eaa4ccb5830cfec2bc081191b43b BUG: 1094119 Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> Reviewed-on: http://review.gluster.org/10101 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* features/bitrot: Follow xattr naming conventionsVenky Shankar2015-05-061-3/+4
| | | | | | | | | | | | | | | | | Instead of "trusted.glusterfs.bit-rot.*" use "trusted.bit-rot.*" NOTE: With this patch, data on existing volumes would be resigned (which should be OK as of now since we do not expect many users as of now :-)) Change-Id: I926c7bca266a9c8f2cb35d57c4d0359aa5cecfa0 BUG: 1170075 Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/10181 Tested-by: NetBSD Build System Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* geo-rep: rename handling in dht volumeNithya Balachandran2015-05-051-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Background: Glusterfs changelogs are stored in each brick, which records the changes happened in that brick. Georep will run in all the nodes of master and processes changelogs "independently". Processing changelogs is in brick level, but all the fops will be replayed on "slave mount" point. Problem: With a DHT volume, in changelog "internal fops" are NOT recorded. For Rename case, Rename is recorded in "hashed" brick changelog. (DHT's internal fops like creating linkto file, unlink is NOT recorded). This lead us to inconsistent rename operations. For example, Distribute volume created with Two bricks B1, B2. //Consider master volume mounted @ /mnt/master and following operations executed: cd /mnt/master touch f1 // f1 falls on B1 Hash mv f1 f2 // f2 falls on B2 Hash // Here, Changelogs are recorded as below: @B1 CREATE f1 @B2 RENAME f1 f2 Here, race exists between Brick B1 and B2, say B2 will get executed first. Source file f1 itself is "NOT PRESENT", so it will go ahead and create f2 (Current implementation). We have this problem When rename falls in another brick and file is unlinked in Master. Similar kind of issue exists in following case too(multiple rename): CREATE f1 RENAME f1 f2 RENAME f2 f1 Solution: Instead of carrying out "changelogging" at "HASHED volume", carry out at the "CACHED volume". This way we have rename operations carried out where actual files are present. So,Changelog recorded as : @B1 CREATE f1 RENAME f1 f2 credit: sarumuga@redhat.com PS: Some of the races as the one below are _NOT_ fixed by this patch * f1 and f2 exist. B1 and B2 are their respective cached subvols. For both files hashed-subvol == cached-subvol * mv f1 f2 on master. * B1 has change-log entry of rename f1 f2 * rebalance migrates f2 from B1 and B2 * mv f2 f1 on master. * B2 has change-log entry of rename f2 f1 Since changelog entries (rename f1 f2) and (rename f2 f1) are processed independently by gsyncds, which of either f1 and f2 survives on slave is subject to race. Note that on master its file f1 with name f1 which survived. On slave it can be either file f1 with name f1 or file f2 with name f2 based on who wins the race of processing changelog. Change-Id: Iebc222f582613924c3a7cba37fb6d3e2d8332eda BUG: 1141379 Signed-off-by: Nithya Balachandran <nbalacha@redhat.com> Reviewed-on: http://review.gluster.org/10410 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com>
* Upcall: Send stat as part of cache_invalidation notificationsSoumya Koduri2015-05-051-17/+0
| | | | | | | | | | | | | | | | Have added support to send attributes of both entries and its parent (include oldparent in case of RENAME fop) in the same notification request to avoid multiple rpc requests. Also, made changes in gfapi to send parent object and its attributes changed in a single upcall event. Change-Id: I92833da3bcec38d65216921c2ce4d10367c32ef1 BUG: 1200262 Signed-off-by: Soumya Koduri <skoduri@redhat.com> Reviewed-on: http://review.gluster.org/10460 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* quota: support for inode quota in quota.confvmallika2015-05-041-1/+0
| | | | | | | | | | | | | | | | | Currently when quota limit is set, corresponding gfid is set in quota.conf. This patch supports storing inode-quota limits in quota.conf and also stores additional byte for each gfid to differentiate between usage quota limit and inode quota limit. Change-Id: I444d7399407594edd280e640681679a784d4c46a BUG: 1202244 Signed-off-by: vmallika <vmallika@redhat.com> Signed-off-by: Sachin Pandit <spandit@redhat.com> Reviewed-on: http://review.gluster.org/10069 Tested-by: NetBSD Build System Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Upcall: Process each of the upcall events separatelySoumya Koduri2015-04-301-3/+13
| | | | | | | | | | | | | | | | As suggested during the code-review of Bug1200262, have modified GF_CBK_UPCALL to be exlusively GF_CBK_CACHE_INVALIDATION. Thus, for any new upcall event, a new CBK procedure will be added. Also made changes to store upcall data separately based on the upcall event type received. BUG: 1200262 Change-Id: I0f5e53d6f5ece16aecb514a0a426dca40fa1c755 Signed-off-by: Soumya Koduri <skoduri@redhat.com> Reviewed-on: http://review.gluster.org/10049 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* rebalance: Introducing local crawl and parallel migrationSusant Palai2015-04-291-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current patch address two part of the design proposed. 1. Rebalance multiple files in parallel 2. Crawl only bricks that belong to the current node Brief design explanation for the above two points. 1. Rebalance multiple files in parallel: ------------------------------------- The existing rebalance engine is single threaded. Hence, introduced multiple threads which will be running parallel to the crawler. The current rebalance migration is converted to a "Producer-Consumer" frame work. Where Producer is : Crawler Consumer is : Migrating Threads Crawler: Crawler is the main thread. The job of the crawler is now limited to fix-layout of each directory and add the files which are eligible for the migration to a global queue in a round robin manner so that we will use all the disk resources efficiently. Hence, the crawler will not be "blocked" by migration process. Producer: Producer will monitor the global queue. If any file is added to this queue, it will dqueue that entry and migrate the file. Currently 20 migration threads are spawned at the beginning of the rebalance process. Hence, multiple file migration happens in parallel. 2. Crawl only bricks that belong to the current node: -------------------------------------------------- As rebalance process is spawned per node, it migrates only the files that belongs to it's own node for the sake of load balancing. But it also reads entries from the whole cluster, which is not necessary as readdir hits other nodes. New Design: As part of the new design the rebalancer decides the subvols that are local to the rebalancer node by checking the node-uuid of root directory prior to the crawler starts. Hence, readdir won't hit the whole cluster as it has already the context of local subvols and also node-uuid request for each file can be avoided. This makes the rebalance process "more scalable". Change-Id: I73ed6ff807adea15086eabbb8d9883e88571ebc1 BUG: 1171954 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: http://review.gluster.org/9657 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: N Balachandran <nbalacha@redhat.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* core: Global timer-wheelVenky Shankar2015-04-261-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | Instantiate a process wide global instance of the timer wheel data structure. Spawning glusterfs* process with option arg "--global-timer-wheel" instantiates a global instance of timer-wheel under global context (->ctx). Translators can make use of this process wide instance [via a call to glusterfs_global_timer_wheel()] instead of maintaining an instance of their own and possibly consuming more memory. Linux kernel too has a single instance of timer wheel where subsystems such as IO, networking, etc.. make use of. Bitrot daemon would be early consumers of this: bitrot translator instances for multiple volumes would track objects belonging to their respective bricks in this global expiry tracking data structure. This is also a first step to move GlusterFS timer mechanism to use timer-wheel. Change-Id: Ie882df607e07acaced846ea269ebf1ece306d6ae BUG: 1170075 Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/10380 Tested-by: NetBSD Build System Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* bitrot/scrub: Scrubber fixesVenky Shankar2015-04-081-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a handful of problem with scrubber which are detailed below. Scrubber used to skip objects for verification due to missing fd iterface to fetch versioning extended attributes. Similar to the inode interface, an fd based interface in POSIX is now introduced. Moreover, this patch also fixes potential false reporting by scrubber due to: An object gets dirtied and signed when scrubber is busy calculatingobject checksum. This is fixed by caching the signed version when an object is first inspected for stalenes, i.e., during pre-compute stage. This version is used to verify checksum in the post-compute stage when the signatures are compared for possible corruption. Side effect of _not_ sending signature length during signing resulted in "truncated" signature to be set for an object. Now, at the time of signing, the signature length is sent and is used in place of invoking strlen() to get signature length (which could have possible 00s). The signature length itself is not persisted in the signature xattr, but is calculated on-the-fly by substracting the xattr length by the "structure" header size. Some of the log entries are made more meaningful (as and aid for debugging). Change-Id: I938bee5aea6688d5d99eb2640053613af86d6269 BUG: 1207624 Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/10118 Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/ec: Implement heal info for ecPranith Kumar K2015-03-301-1/+1
| | | | | | | | | | | | This also lists the files that are on-going I/O, which will be fixed later. Change-Id: Ib3f60a8b7e8798d068658cf38eaef2a904f9e327 BUG: 1203581 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/10020 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com>
* Bitrot StubVenky Shankar2015-03-241-0/+17
| | | | | | | | | | | | | Bitrot stub implements object versioning required for identifying signature freshness. More details about versioning is explained as a part of the "bitrot feature documentation" patch. Change-Id: I2ad70d9eb109ba4a12148ab8d81336afda529ad9 BUG: 1170075 Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/9709 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/afr : enable inspection & resolution of files in split-brainAnuradha2015-03-191-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Part 2/2 patch to enable users analyze and resolve split-brain. This patch enables : 1) Users to inspect the files in data and metadata split-brain. 2) Resolve the split-brain. Both using a series of setfattr commands. Consider a volume "test" with 2 bricks. 1) To inspect a file f1: setfattr -n replica.split-brain-choice -v test-client-0 f1 After the execution of this command, if no read_subvol is found, reads will be served from test-client-0 (corresponding to brick-0). 2) To resolve split-brain : setfattr -n replica.split-brain-heal-finalize -v test-client-0 f1 Execution of this command will lead to the resolution of data and metadata split-brain with subvol mentioned in the command (test-client-0 here) as the source and the rest as sink. Change-Id: Ia20f3ee5abd3119e3d54fcc599f1e55ac65fd179 BUG: 1191396 Signed-off-by: Anuradha <atalur@redhat.com> Reviewed-on: http://review.gluster.org/9743 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* Adding ChangeTimeRecorder(CTR) Xlator to GlusterFSJoseph Fernandes2015-03-191-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ********************************************************************** ChangeTimeRecorder(CTR) Xlator | ********************************************************************** ChangeTimeRecorder(CTR) is server side xlator(translator) which sits just above posix xlator. The main role of this xlator is to record the access/write patterns on a file residing the brick. It records the read(only data) and write(data and metadata) times and also count on how many times a file is read or written. This xlator also captures the hard links to a file(as its required by data tiering to move files). CTR Xlator is the consumer of libgfdb. To Enable/Disable CTR Xlator: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ gluster volume set <volume-name> features.ctr-enabled {on/off} To Enable/Disable Frequency Counter Recording in CTR Xlator: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ gluster volume set <volume-name> features.record-counters {on/off} Change-Id: I5d3cf056af61ac8e3f8250321a27cb240a214ac2 BUG: 1194753 Signed-off-by: Joseph Fernandes <josferna@redhat.com> Reviewed-on: http://review.gluster.org/9935 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterfsd: add "print-netgroups" and "print-exports" commandNiels de Vos2015-03-181-0/+2
| | | | | | | | | | | | | | | | | | | | | | | NFS now has the ability to use a separate file for "netgroups" and "exports". An administrator should have the ability to check the validity of the files before applying the configuration. The "glusterfsd" command now has the following additional arguments that can be used to check the configuration: --print-netgroups: Validate the netgroups file and print it out --print-exports: Validate the exports file and print it out BUG: 1143880 Change-Id: I24c40d50110d49d8290f9fd916742f7e4d0df85f URL: http://www.gluster.org/community/documentation/index.php/Features/Exports_Netgroups_Authentication Original-author: Shreyas Siravara <shreyas.siravara@gmail.com> CC: Richard Wareing <rwareing@fb.com> CC: Jiffin Tony Thottan <jthottan@redhat.com> Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9365 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* features/quota : Introducing inode quotavmallika2015-03-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ========================================================================== Inode quota ========================================================================== = Currently, the only way to retrieve the number of files/objects in a = = directory or volume is to do a crawl of the entire directory/volume. = = This is expensive and is not scalable. = = = = The proposed mechanism will provide an easier alternative to determine = = the count of files/objects in a directory or volume. = = = = The new mechanism proposes to store count of objects/files as part of = = an extended attribute of a directory. Each directory's extended = = attribute value will indicate the number of files/objects present = = in a tree with the directory being considered as the root of the tree. = = = = The count value can be accessed by performing a getxattr(). = = Cluster translators like afr, dht and stripe will perform aggregation = = of count values from various bricks when getxattr() happens on the key = = associated with file/object count. = A new interface is introduced: ------------------------------ limit-objects : limit the number of inodes at directory level list-objects : list the directories where the limit is set remove-objects : remove the limit from the directory ========================================================================== CLI COMMAND: gluster volume quota <volname> limit-objects <path> <number> [<percent>] * <number> is a hard-limit for number of objects limitation for path "<path>" If hard-limit is exceeded, creation of file/directory is no longer permitted. * <percent> is a soft-limit for number of objects creation for path "<path>" If soft-limit is exceeded, a warning is issued for each creation. CLI COMMAND: gluster volume quota <volname> remove-objects [path] ========================================================================== CLI COMMAND: gluster volume quota <volname> list-objects [path] ... Sample output: ------------------ Path Hard-limit Soft-limit Used Available Soft-limit exceeded? Hard-limit exceeded? ------------------------------------------------------------------------ -------------------------------------- /dir 10 80% 10 0 Yes Yes ========================================================================== [root@snapshot-28 dir]# ls a b file11 file12 file13 file14 file15 file16 file17 [root@snapshot-28 dir]# touch a1 touch: cannot touch `a1': Disk quota exceeded * Nine files are created in directory "dir" and directory is included in * the count too. Hence the limit "10" is reached and further file creation fails ========================================================================== Note: We have also done some re-factoring in cli for volume name validation. New function cli_validate_volname is created ========================================================================== Change-Id: I1823497de4f790a2a20ebb1770293472ea33ee2b BUG: 1190108 Signed-off-by: Sachin Pandit <spandit@redhat.com> Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/9769 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/dht: Change the subvolume encoding in d_off to be a "global"Dan Lambright2015-03-181-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | position in the graph rather than relative (local) to a particular translator. Encoding the volume in this way allows a single translator to manage which brick is currently being scanned for directory entries. Using a single translator minimizes allocated bits in the d_off. It also allows multiple DHT translators in the same graph to have a common frame of reference (the graph position) for which brick is being read. Multiple DHT translators are needed for the Tiering feature. The fix builds off a previous change (9332) which removed subvolume encoding from AFR. The fix makes an equivalent change to the EC translator. More background can be found in fix 9332 and gluster-dev discussions [1]. DHT and AFR/EC are responsibile (as before) for choosing which brick to enumerate directory entries in over the readdir lifecycle. The client translator receiving the readdir fop encodes the dht_t. It is referred to as the "leaf node" in the graph and corresponds to the brick being scanned. When DHT decodes the d_off, it translates the leaf node to a local subvolume, which represents the next node in the graph leading to the brick. Tracking of leaf nodes is done in common utility functions. Leaf nodes counts and positional information are updated on a graph switch. [1] www.gluster.org/pipermail/gluster-devel/2015-January/043592.html Change-Id: Iaf0ea86d7046b1ceadbad69d88707b243077ebc8 BUG: 1190734 Signed-off-by: Dan Lambright <dlambrig@redhat.com> Reviewed-on: http://review.gluster.org/9688 Reviewed-by: Xavier Hernandez <xhernandez@datalab.es> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* Quota/marker : Support for inode quotavmallika2015-03-171-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Currently, the only way to retrieve the number of files/objects in a directory or volume is to do a crawl of the entire directory/volume. This is expensive and is not scalable. The new mechanism proposes to store count of objects/files as part of an extended attribute of a directory. Each directory's extended attribute value will indicate the number of files/objects present in a tree with the directory being considered as the root of the tree. Currently file usage is accounted in marker by doing multiple FOPs like setting and getting xattrs. Doing this with STACK WIND and UNWIND can be harder to debug as involves multiple callbacks. In this code we are replacing current mechanism with syncop approach as syncop code is much simpler to follow and help us implement inode quota in an organized way. Change-Id: Ibf366fbe07037284e89a241ddaff7750fc8771b4 BUG: 1188636 Signed-off-by: vmallika <vmallika@redhat.com> Signed-off-by: Sachin Pandit <spandit@redhat.com> Reviewed-on: http://review.gluster.org/9567 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* every/where: add GF_FOP_IPC for inter-translator communicationJeff Darcy2015-03-171-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Several features - e.g. encryption, erasure codes, or NSR - involve multiple cooperating translators which sometimes need a "private" means of communication amongst themselves. Historically we've used virtual or synthetic xattrs, but that's not very elegant and clutters up the getxattr/setxattr path which must also handle real xattr requests. This new fop should address that. The only argument is an int32_t "op" which should be recognized by the target translator. It is recommended that translators using these feature follow some convention regarding the ops that they define, to avoid conflicts. Using a hash of the target translator's type string as a base for a series of ops would probably be a good start. Any other information can be passed in both directions using xdata. The default behavior for this fop, as with any other, is to pass through to FIRST_CHILD. That makes use of this fop "transparent" to other translators that were written before it existed, but it also means that it only really works with pass-through translators. If a routing translator (such as DHT) or a fan-out translator (such as AFR) is involved, the IPC might not reach its intended destination unless those translators are modified to forward IPC fops along all paths. If an IPC gets all the way to storage/posix it is considered an error, much like an uncaught exception. We don't actually *do* anything in that case, but we do log it send back an EOPNOTSUPP error. This makes the "unrecognized opcode" condition distinguishable from the "no IPC support" condition (which would yield an RPC error instead) so clients can probe for the presence of a handler for their own favorite opcode and either use that or use old-school xattrs depending on the result. BUG: 1158628 Signed-off-by: Venky Shankar <vshankar@redhat.com> Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Change-Id: I84af1b17babe5b30ec03ecf027ae37d09b873968 Reviewed-on: http://review.gluster.org/8812 Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Upcall: New xlator to store various states and send cbk eventsSoumya Koduri2015-03-171-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | Framework on the server-side, to handle certain state of the files accessed and send notifications to the clients connected. A generic and extensible framework, used to maintain states in the glusterfsd process for each of the files accessed (including the clients info doing the fops) and send notifications to the respective glusterfs clients incase of any change in that state. This patch handles "Inode Update/Invalidation" upcall event. Feature page: URL: http://www.gluster.org/community/documentation/index.php/Features/Upcall-infrastructure Below link has a writeup which explains the code changes done - URL: https://soumyakoduri.wordpress.com/2015/02/25/glusterfs-understanding-upcall-infrastructure-and-cache-invalidation-support/ Change-Id: Ie3d724be9a3419fcf18901a753e8ec2df2ac802f BUG: 1200262 Signed-off-by: Soumya Koduri <skoduri@redhat.com> Reviewed-on: http://review.gluster.org/9535 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* libglusterfs: Add functions for xlator and graph cleanup.Poornima G2015-03-021-0/+2
| | | | | | | | | | Change-Id: If341e3c0a559aa5bbca9c1263a241c6592c59706 BUG: 1093594 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/9696 Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/afr : provide split-brain info by using getxattrAnuradha2015-02-251-0/+1
| | | | | | | | | | | | | | | | | | | | | | This patch is one part to enable users analyze and resolve split-brain. Problem : To know if a file is in data/metadata split-brain Solution : Performing "getfattr -n afr.split-brain-status <path-to-file>" from the mount provides this information. Also provides the list of afr children to analyse to get more information. Change-Id: I4d9b429794759a906371416cb84c84a212e2c7b9 BUG: 1191396 Signed-off-by: Anuradha <atalur@redhat.com> Reviewed-on: http://review.gluster.org/9633 Reviewed-by: Ravishankar N <ravishankar@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* protocol/client: sequence CHILD_UP, CHILD_DOWN etc notificationsKrishnan Parthasarathi2015-02-071-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ... from all bricks in the volume This patch is important in the context of MT epoll. With MT epoll, notification events from client xlators could reach cluster xlators like afr, dht, ec, stripe etc. in different orders. For e.g, In a distributed replicate volume of 2 bricks, namely Brick1 and Brick2, the following network events are observed by a mount process. - connection to Brick1 is broken. - connection to Brick1 has been restored. - connection to Brick2 is broken. - connection to Brick2 has been restored. Without establishing a total ordering of events, we can't guarantee that cluster xlators like afr, dht perceive them in the same order. While we would expect afr (say) to perceive it as only one of Brick1 and Brick2 going down at any given time, it is possible for the notification of Brick2 going offline to race with the notification of Brick1 coming back online. Change-Id: I78f5a52bfb05593335d0e9ad53ebfff98995593d BUG: 1104462 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/9591 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* epoll: Adding the ability to configure epoll threadsShyam2015-02-071-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the ability to configure the number of event threads for various gluster services. Currently with the multi thread epoll patch, it is possible to have more than one thread waiting on socket activity and processing the same. This thread count is currently static, which this commit makes dynamic. The current services which use IO path, i.e brick processes, any client process (nfs, FUSE, gfapi, heal, rebalance, etc.a), gain 2 set parameters to control the number of threads that are processing events. These settings are, - client.event-threads <n> - server.event-threads <n> The client setting affects the client graph consumers, and the server setting affects the brick processes. These are processed and inited/reconfigured using the client/server protocol xlators. Other services (say glusterd) would need to extend similar configuration settings to take advantage of multi threaded event processing. At present glusterd is not enabled with this commit, as it does not stand to gain from this multi-threading (as I understand it). Change-Id: Id8422fc57a9f95a135158eb6477ccf9d3c9ea4d9 BUG: 1104462 Signed-off-by: Shyam <srangana@redhat.com> Reviewed-on: http://review.gluster.org/9488 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* uss: disable memory accounting for the snapshot daemonRaghavendra Bhat2015-01-281-0/+1
| | | | | | | | | | | | | | | | | | * Bring in option to disable memory accounting for a glusterfs process This reverses the changes done by the commit 7fba3a88f1ced610eca0c23516a1e720d75160cd. * Change the key from "memory-accounting" to "no-memory-accounting", as by default all the glusterfs process enable memory accounting now. So to disable memory accounting for some process, "no-mem-accounting" argument has to be passed. Change-Id: I39c7cefb0fe764ea3e48f4e73e1305b084c5f497 BUG: 1184366 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/9469 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/afr: split-brain resolution CLIRavishankar N2015-01-151-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Extend the AFR heal command to include automated split-brain resolution. This patch [3/3] is the final patch for afr automated split-brain resolution implementation. "gluster volume heal <VOLNAME> [full | statistics [heal-count [replica <HOSTNAME:BRICKNAME>]] |info [healed | heal-failed | split-brain]| split-brain {bigger-file <FILE> |source-brick <HOSTNAME:BRICKNAME> [<FILE>]}]" The new additions being: 1.gluster volume heal <VOLNAME> split-brain bigger-file <FILE> Locates the replica containing the FILE, selects bigger-file as source and completes heal. 2.gluster volume heal <VOLNAME> split-brain source-brick <HOSTNAME:BRICKNAME> <FILE> Selects <FILE> present in <HOSTNAME:BRICKNAME> as source and completes heal. 3.gluster volume heal <VOLNAME> split-brain <HOSTNAME:BRICKNAME> Selects all split-brained files in <HOSTNAME:BRICKNAME> as source and completes heal. Note: <FILE> can be either the full file name as seen from the root of the volume (or) the gfid-string representation of the file, which sometimes gets displayed in the heal info command's output. Entry/gfid split-brain resolution is not supported. Example can be found in the test case. Change-Id: I4649733922d406f14f28ee9033a5cb627b9538b3 BUG: 1136769 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/9377 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* feature/changelog: Virtual xattr to trigger explicit sync in geo-rep.Kotresh HR2014-12-291-0/+1
| | | | | | | | | | | | | | | | | | | A virtual xattr "glusterfs.geo-rep.trigger-sync" is provided in glusterfs through changelog translator. Geo-rep triggers a explicit data sync on setting this xattr on a file. Changelog captures a DATA entry on file's gfid on setting this virtual xattr on a file. This is supported only for files. It doesn't support directories. Usage: setfattr -n glusterfs.geo-rep.trigger-sync <file-path> Change-Id: Ia689326ac2dcb31035ffbecad2c548eda4eb9245 BUG: 1176934 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/9337 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* cluster/afr : Change in volume heal info commandAnuradha2014-12-231-0/+2
| | | | | | | | | | | | | | | | gluster volume heal <volname> info command will now also display if the files listed (in the output of the command) are in split-brain or possibly being healed. This patch also fixes build warning that occurs. Change-Id: I1fc92e62137f23b2b9ddf6e05819cee6230741d1 BUG: 1163804 Signed-off-by: Anuradha <atalur@redhat.com> Reviewed-on: http://review.gluster.org/9119 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* glusterd: Add last successful glusterd lock backtraceKrishnan Parthasarathi2014-09-221-0/+5
| | | | | | | | | | | | | | Also, moved the backtrace fetching logic to a separate function. Modified the backtrace fetching logic able to work under memory pressure conditions. Change-Id: Ie38bea425a085770f41831314aeda95595177ece BUG: 1138503 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/8584 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* build: make GLUSTERD_WORKDIR rely on localstatedirHarshavardhana2014-08-071-2/+6
| | | | | | | | | | | | | | | | | | | | | | - Break-way from '/var/lib/glusterd' hard-coded previously, instead rely on 'configure' value from 'localstatedir' - Provide 's/lib/db' as default working directory for gluster management daemon for BSD and Darwin based installations - loff_t is really off_t on Darwin - fix-off the warnings generated by clang on FreeBSD/Darwin - Now 'tests/*' use GLUSTERD_WORKDIR a common variable for all platforms. - Define proper environment for running tests, define correct PATH and LD_LIBRARY_PATH when running tests, so that the desired version of glusterfs is used, regardless where it is installed. (Thanks to manu@netbsd.org for this additional work) Change-Id: I2339a0d9275de5939ccad3e52b535598064a35e7 BUG: 1111774 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/8246 Tested-by: Gluster Build System <jenkins@build.gluster.com>
* libglusterfs: wrong function definition of synclock_destory(). Humble Chirammal2014-08-061-1/+1
| | | | | | | | | | | | | | | | | synclock_destory() has been prototyped in syncop.h, how-ever synclock_destroy() is the actual function used in syncop.c. Correcting this function definition along with few typos. Change-Id: I35a818190c1d37c303279ca7a820f01895751bd9 BUG: 1075417 Signed-off-by: Humble Chirammal <hchiramm@redhat.com> Reviewed-on: http://review.gluster.org/8266 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-by: soumya k <skoduri@redhat.com> Reviewed-by: Poornima G <pgurusid@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/dht: Modified logic of linkto file deletion on non-hashedVenkatesh Somyajulu2014-07-311-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently whenever dht_lookup_everywhere gets called, if in dht_lookup_everywhere_cbk, a linkto file is found on non-hashed subvolume, file is unlinked. But there are cases when this file is under migration. Under such condition, we should avoid deletion of file. When some other rebalance process changes the layout of parent such that dst_file (w.r.t. migration) falls on non-hashed node, then may be lookup could have found it as linkto file but just before unlink, file is under migration or already migrated In such cased unlink can be avoided. Race: ------- If we have two bricks (brick-1 and brick-2) with initial file "a" under BaseDir which is hashed as well as cached on (brick-1). Assume "a" hashing gives 44. Brick-1 Brick-2 Initial Setup: BaseDir/a BaseDir [1-50] [51-100] Now add new-brick Brick-3. 1. Rebalance-1 on node Node-1 (Brick-1 node) will reset the BaseDir Layout. 2. After that it will perform a) Create linkto file on new-hashed (brick-2) b) Perform file migration. 1.Rebalance-1 Fixes the base-layout: Brick-1 Brick-2 Brick-3 --------- ---------- ------------ BaseDir/a BaseDir BaseDir [1-33] [34-66] [67-100] 2. Only a) is BaseDir/a BaseDir/a(linkto) BaseDir performed Create linktofile Now rebalance 2 on node-2 jumped in and it will perform step 1 and 2-a. After (rebal-2, step-1), it changes the layout of the BaseDir. BaseDir/a BaseDir/a(link) BaseDir [67-100] [1-33] [34-66] For (rebale-2, step-2), It will perform lookup at Brick-3 as w.r.t new layout 44 falls for brick-3. But lookup will fail. So dht_lookup_everywhere gets called. NOTE: On brick-2 by rebalance-1, a linkto file was created. Currently that linkto files gets deleted by rebalance-2 lookup as it is considered as stale linkto file. But with patch if rebalance is already in progress or rebalance is over, linkto file will not be unlinked. If rebalance is in progress fd will be open and if rebalance is over then linkto file wont be set. Change-Id: I3fee0d28de3c76197325536a9e30099d2413f079 BUG: 1116150 Signed-off-by: Venkatesh Somyajulu <vsomyaju@redhat.com> Reviewed-on: http://review.gluster.org/8345 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* socket/glusterd/client: enable SSL for managementJeff Darcy2014-07-101-0/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The feature is controlled by presence of the following file: /var/lib/glusterd/secure-access See the comment near the definition of SECURE_ACCESS_FILE in glusterfs.h for the rationale. With this enabled, the following rules apply to connections: UNIX-domain sockets never have SSL. Management-port sockets (both connecting and accepting, in daemons and CLI) have SSL based on presence of the file. Other IP sockets have SSL based on the existing client.ssl and server.ssl volume options. Transport multi-threading is explicitly turned off in glusterd (it would otherwise be turned on when SSL is) due to multi-threading issues. Tests have been elided to avoid risk of leaving a file which will cause all subsequent tests to run with management SSL still enabled. IMPLEMENTATION NOTE The implementation is a bit messy, and consists of two stages. First we decide whether to set the relevant fields in our context structure, based on presence of the sentinel file OR a command-line override. Later we decide whether a particular connection should actually use SSL, based on the context flags plus what kind of connection we're making[1] and what kind of daemon we're in[2]. [1] inbound, outbound to glusterd port, other outbound [2] glusterd, glusterfsd, other TESTING NOTE Instead of just running one special test for this feature, the ideal would be to run all tests with management SSL enabled. However, it would be inappropriate or premature to set up an optional feature in the patch itself. Therefore, the method of choice is to submit a separate patch on top, which modifies "cleanup" in include.rc to recreate the secure-access file and associated SSL certificate/key files before each test. Change-Id: I0e04d6d08163893e24ec8c031748c5c447d7f780 BUG: 1114604 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/8094 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* gsyncd / geo-rep: FSH recommended log locationsVenky Shankar2014-06-101-2/+3
| | | | | | | | | | | | | | | | Upgrading "working_dir" on the fly is a bit unclean yet (though it works) as currently config upgrade does not support "old" values to be expanded by using configuration variables. Change-Id: I44ed65c281f2e0ce3b6b467addc5c1c88ac674e7 BUG: 1077516 Signed-off-by: Venky Shankar <vshankar@redhat.com> Signed-off-by: Kotresh H R <khiremat@redhat.com> Signed-off-by: Aravinda VK <avishwan@redhat.com> Signed-off-by: Ajeet Jha <ajha@redhat.com> Reviewed-on: http://review.gluster.org/7375 Tested-by: Gluster Build System <jenkins@build.gluster.com>
* cluster/dht: Fix min-free-disk calculations when quota-deem-statfs is onKrutika Dhananjay2014-06-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PROBLEM: As part of file creation, DHT sends a statfs call to all of its sub-volumes and expects in return the local space consumption and availability on each one of them. This information is used by DHT to ensure that atleast min-free-disk amount of space is left on each sub-volume in the event that there ARE other sub-volumes with more space available. But when quota-deem-statfs is enabled, quota xlator on every brick unwinds the statfs call with volume-wide consumption of disk space. This leads to miscalculation in min-free-disk algo, thereby misleading DHT at some point, into thinking all sub-volumes have equal available space, in which case DHT keeps sending new file creates to subvol-0, causing it to become 100% full at some point although there ARE other subvols with ample space available. FIX: The fix is to make quota_statfs() behave as if quota xlator weren't enabled, thereby making every brick return only its local consumption and disk space availability. Change-Id: I211371a1eddb220037bd36a128973938ea8124c2 BUG: 1099890 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/7845 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* meta: (re-)Implement Meta translatorAnand Avati2014-05-051-0/+1
| | | | | | | | | | | | | | | | | The meta translator exposes details about glusterfs itself in the form of a virtual namespace. Loading the translator on the client side creates the meta virtual view under $mntpoint/.meta by default. The directory is not listed (even with ls -a) and can be accessed by doing a "cd /mnt/.meta" Change-Id: I5ffdf39203841a9562a8280a1f79dc76d4dded5d BUG: 1089216 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/7509 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Harshavardhana <harsha@harshavardhana.net>
* logging: Introduce suppression of repetitive log messagesKrutika Dhananjay2014-04-301-0/+16
| | | | | | | | | Change-Id: I8efa08cc9832ad509fba65a88bb0cddbaf056404 BUG: 1075611 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/7475 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* build: MacOSX Porting fixesHarshavardhana2014-04-241-1/+1
| | | | | | | | | | | | | | | | | | | | | git@forge.gluster.org:~schafdog/glusterfs-core/osx-glusterfs Working functionality on MacOSX - GlusterD (management daemon) - GlusterCLI (management cli) - GlusterFS FUSE (using OSXFUSE) - GlusterNFS (without NLM - issues with rpc.statd) Change-Id: I20193d3f8904388e47344e523b3787dbeab044ac BUG: 1089172 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Signed-off-by: Dennis Schafroth <dennis@schafroth.com> Tested-by: Harshavardhana <harsha@harshavardhana.net> Tested-by: Dennis Schafroth <dennis@schafroth.com> Reviewed-on: http://review.gluster.org/7503 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* logging: Make logger and log format configurable through cliKrutika Dhananjay2014-04-111-0/+2
| | | | | | | | | | Change-Id: Ic4b701a6621578848ff67ae4ecb5a10b5f32f93b BUG: 1075611 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/7372 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* gluster: GlusterFS Volume Snapshot FeatureAvra Sengupta2014-04-111-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | This is the initial patch for the Snapshot feature. Current patch includes following features: * Snapshot create * Snapshot delete * Snapshot restore * Snapshot list * Snapshot info * Snapshot status * Snapshot config Change-Id: I2f46920c0d61c515f6a60e0f8b46fff886d9f6a9 BUG: 1061685 Signed-off-by: shishir gowda <sgowda@redhat.com> Signed-off-by: Sachin Pandit <spandit@redhat.com> Signed-off-by: Vijaikumar M <vmallika@redhat.com> Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Signed-off-by: Rajesh Joseph <rjoseph@redhat.com> Signed-off-by: Joseph Fernandes <josferna@redhat.com> Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/7128 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* gfapi: glfs_set_volfile_server() now entertains multiple callsHarshavardhana2014-04-011-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Previous API: glfs_set_volfile_server (..., const char *host, ...) - single call New API's: glfs_set_volfile_server (..., const char *host1, ...) glfs_set_volfile_server (..., const char *host2, ...) Multiple calls to this function with different volfile servers, port or transport-type would create a list of volfile servers which would be polled during `volfile_fetch_attempts()` glfs_unset_volfile_server (..., const char *host, ...) to remove a server from the list (this is provided for future usage) Change-Id: I313efbd3efbd0214e2a71465f33195788df406cc BUG: 986429 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/7317 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* log: enhance gluster log format with message ID and standardize errno reportingShyamsundarR2014-03-281-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently there are quite a slew of logs in Gluster that do not lend themselves to trivial analysis by various tools that help collect and monitor logs, due to the textual nature of the logs. This FEAT is to make this better by giving logs message IDs so that the tools do not have to do complex log parsing to break it down to problem areas and suggest troubleshooting options. With this patch, a new set of logging APIs are introduced that take additionally a message ID and an error number, so as to print the message ID and the descriptive string for the error. New APIs: - gf_msg, gf_msg_debug/trace, gf_msg_nomem, gf_msg_callingfn These APIs follow the functionality of the previous gf_log* counterparts, and hence are 1:1 replacements, with the delta that, gf_msg, gf_msg_callingfn take additional parameters as specified above. Defining the log messages: Each invocation of gf_msg/gf_msg_callingfn, should provide an ID and an errnum (if available). Towards this, a common message id file is provided, which contains defines to various messages and their respective strings. As other messages are changed to the new infrastructure APIs, it is intended that this file is edited to add these messages as well. Framework enhanced: The logging framework is also enhanced to be able to support different logging backends in the future. Hence new configuration options for logging framework and logging formats are introduced. Backward compatibility: Currently the framework supports logging in the traditional format, with the inclusion of an error string based on the errnum passed in. Hence the shift to these new APIs would retain the log file names, locations, and format with the exception of an additional error string where applicable. Testing done: Tested the new APIs with different messages in normal code paths Tested with configurations set to gluster logs (syslog pending) Tested nomem variants, inducing the message in normal code paths Tested ident generation for normal code paths (other paths pending) Tested with sample gfapi program for gfapi messages Test code is stripped from the commit Pending work (not to be addressed in this patch (future)): - Logging framework should be configurable - Logging format should be configurable - Once all messages move to the new APIs deprecate/delete older APIs to prevent misuse/abuse using the same - Repeated log messages should be suppressed (as a configurable option) - Logging framework assumes that only one init is possible, but there is no protection around the same (in existing code) - gf_log_fini is not invoked anywhere and does very little cleanup (in existing code) - DOxygen comments to message id headers for each message Change-Id: Ia043fda99a1c6cf7817517ef9e279bfcf35dcc24 BUG: 1075611 Signed-off-by: ShyamsundarR <srangana@redhat.com> Reviewed-on: http://review.gluster.org/6547 Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/afr: refactorAnand Avati2014-03-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | - Remove client side self-healing completely (opendir, openfd, lookup) - Re-work readdir-failover to work reliably in case of NFS - Remove unused/dead lock recovery code - Consistently use xdata in both calls and callbacks in all FOPs - Per-inode event generation, used to force inode ctx refresh - Implement dirty flag support (in place of pending counts) - Eliminate inode ctx structure, use read subvol bits + event_generation - Implement inode ctx refreshing based on event generation - Provide backward compatibility in transactions - remove unused variables and functions - make code more consistent in style and pattern - regularize and clean up inode-write transaction code - regularize and clean up dir-write transaction code - regularize and clean up common FOPs - reorganize transaction framework code - skip setting xattrs in pending dict if nothing is pending - re-write self-healing code using syncops - re-write simpler self-heal-daemon Change-Id: I1e4080c9796c8a2815c2dab4be3073f389d614a8 BUG: 1021686 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/6010 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* protocol/server: do not do root-squashing for trusted clientsRaghavendra Bhat2014-02-101-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * As of now clients mounting within the storage pool using that machine's ip/hostname are trusted clients (i.e clients local to the glusterd). * Be careful when the request itself comes in as nfsnobody (ex: posix tests). So move the squashing part to protocol/server when it creates a new frame for the request, instead of auth part of rpc layer. * For nfs servers do root-squashing without checking if it is trusted client, as all the nfs servers would be running within the storage pool, hence will be trusted clients for the bricks. * Provide one more option for mounting which actually says root-squash should/should not happen. This value is given priority only for the trusted clients. For non trusted clients, the volume option takes the priority. But for trusted clients if root-squash should not happen, then they have to be mounted with root-squash=no option. (This is done because by default blocking root-squashing for the trusted clients will cause problems for smb and UFO clients for which the requests have to be squashed if the option is enabled). * For geo-replication and defrag clients do not do root-squashing. * Introduce a new option in open-behind for doing read after successful open. Change-Id: I8a8359840313dffc34824f3ea80a9c48375067f0 BUG: 954057 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/4863 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* features/quota: Metadata cleanupVarun Shastry2014-01-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Quota and marker uses 'trusted.glusterfs.quota*' and 'trusted.pgfid*' xattrs to store its configurations and accounting information and also to build the parent inode chain in case of absense of path. Problem: After disabling and then enabling quota back, the xattrs may contain stale data leading to impaired accounting and thus improper enforcement. Solution: Clean up all the quota related xattrs after quota disable. Marker xlator implements a virtual xattr to cleanup quota and pgfid xattrs. In this approach glusterd mounts an auxiliary mount and sends the below command to all the files by crawling the mountpoint. #setfattr -n "glusterfs.quota-xattr-cleanup" -v 1 <path/to/file> Credit: Krishnan Parthasarathi <kparthas@redhat.com> Varun Shastry <vshastry@redhat.com> Change-Id: I9380eca58a285dc27dd572de1767aac8f2cd8049 BUG: 969461 Signed-off-by: Varun Shastry <vshastry@redhat.com> Reviewed-on: http://review.gluster.org/6369 Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* locks: various fixesAnand Avati2014-01-131-1/+0
| | | | | | | | | | | | | | | | - implement ref/unref of entry locks (and fix bad pointer deref crashes) - code cleanup and deleted various data types - fix improper read/write lock conflict detection in entrylk - fix indefinite hang of blocked locks on disconnect - register locks in client_t synchronously, fix crashes in disconnect path Change-Id: Id273690c9111b8052139d1847060d1fb5a711924 BUG: 849630 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/6638 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* pathinfo: Provide user namespace access.Vijaykumar M2013-12-161-3/+6
| | | | | | | | | | | | | | | | | Locality can be now queried by unprivileged users with key "glusterfs.pathinfo". Setting both "glusterfs.pathinfo" and "trusted.glusterfs.pathinfo" on disk is prevented with this patch. Original Author: Vijay Bellur <vbellur@redhat.com> Change-Id: I4f7a0db8ad59165c4aeda04b23173255157a8b79 Signed-off-by: Vijaykumar M <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/5101 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/dht: instruct marker whenever it shouldn't do accountingRaghavendra G2013-11-261-0/+1
| | | | | | | | | | | | | | | | | | This is needed for two reasons: * since dht-linkfiles are internal, they shouldn't be accounted. * hardlink handling in marker is broken. link/unlink of hardlinks present in same directory can break marker accounting. Hence, if src and dst are in same directory in case of rename, dht - if it breaks rename into link/unlink operations - should instruct marker to not to do accounting. Change-Id: I9c9f7384569f75a2792f6450ee7a5279bf751ae7 BUG: 1022995 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/6203 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* core: add dht_is_linkfile helper procedure.Raghavendra G2013-11-261-0/+10
| | | | | | | | | | | | | | components other than distribute (like marker to exclude linkfiles from being accounted) also need awareness of what constitutes a linkfile. Hence its good to separate out this functionality into core. Change-Id: Ib944eeacc991bb1de464c9e73ee409fc7a689ff1 BUG: 1022995 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/6152 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
generated by cgit (git 2.34.1) at 2024-05-21 16:56:57 +0000