summaryrefslogtreecommitdiffstats
path: root/glusterfs.spec.in
Commit message (Collapse)AuthorAgeFilesLines
* NFS-Ganesha: Automatically export vol that was exported before vol restartMeghana M2015-06-161-1/+4
| | | | | | | | | | | | | | | | | | | | Consider a volume that is exported via NFS-Ganesha. Stopping this volume will automatically unexport the volume. Starting this volume should automatically export it. Although the logic was already there, there was a bug in it. Fixing the same by introducing a hook script. Also with the new CLI options, the hook script S31ganesha-set.sh is no longer required. Hence, removing the same. Adding a comment to tell the user that one of the CLI commands will take a few minutes to complete. Change-Id: Ibff769ca04fef0c2a129c83fe31fc9c869350e8d BUG: 1231738 Signed-off-by: Meghana Madhusudhan <mmadhusu@redhat.com> Reviewed-on: http://review.gluster.org/11247 Reviewed-by: soumya k <skoduri@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* spec/geo-rep: Add rsync as dependency for georeplication rpmAravinda VK2015-06-121-0/+4
| | | | | | | | | | | | If rsync is not installed, Geo-rep will go faulty on started. Added rsync as dependency for georep rpm Change-Id: I49614957ccde47645185a65191d6d7baf1cc826c Signed-off-by: Aravinda VK <avishwan@redhat.com> BUG: 1231205 Reviewed-on: http://review.gluster.org/11201 Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* tools/glusterfind: Cleanup glusterfind dir after a volume deleteAravinda VK2015-06-121-0/+6
| | | | | | | | | | | | | | | | | | If `glusterfind delete` command was not run before volume delete, stale session directories exists in /var/lib/glusterd/glusterfind directories. Also shows these sessions in `glusterfind list` When Volume is deleted, Post hook will be run which cleans up the stale session directories BUG: 1225465 Change-Id: I54c46c30313e92c1bb4cb07918ed2029b375462c Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/10944 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kotresh HR <khiremat@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* rpm: add option "--with debug" for rpmbuild/mockNiels de Vos2015-06-071-0/+5
| | | | | | | | | | | | | When passing "--with debug" to mock or rpmbuild, the build process will add the "--enable-debug" option to ./configure. This makes it easier to build RPMs with debugging enabled. Change-Id: Ie584a4a03525385b337bbf81e5093f2af1b0b780 BUG: 1198849 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/11020 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* glusterd/shared_storage: Provide a volume set option to create and mount the ↵Avra Sengupta2015-06-041-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | shared storage Introducing a global volume set option(cluster.enable-shared-storage) which helps create and set-up the shared storage meta volume. gluster volume set all cluster.enable-shared-storage enable On enabling this option, the system analyzes the number of peers in the cluster, which are currently connected, and chooses three such peers(including the node the command is issued from). From these peers a volume(gluster_shared_storage) is created. Depending on the number of peers available the volume is either a replica 3 volume(if there are 3 connected peers), or a replica 2 volume(if there are 2 connected peers). "/var/run/gluster/ss_brick" serves as the brick path on each node for the shared storage volume. We also mount the shared storage at "/var/run/gluster/shared_storage" on all the nodes in the cluster as part of enabling this option. If there is only one node in the cluster, or only one node is up then the command will fail Once the volume is created, and mounted the maintainance of the volume like adding-bricks, removing bricks etc., is expected to be the onus of the user. On disabling the option, we provide the user a warning, and on affirmation from the user we stop the shared storage volume, and unmount it from all the nodes in the cluster. gluster volume set all cluster.enable-shared-storage disable Change-Id: Idd92d67b93f444244f99ede9f634ef18d2945dbc BUG: 1222013 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/10793 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com>
* build: fix compiling on older distributionsNiels de Vos2015-06-031-7/+33
| | | | | | | | | | | | | | | | | | | | | | | data-tiering is disabled on RHEL-5 because it depends on a too new SQLite version. This change also prevents installing some of files that are used by geo-replication, which is also not available on RHEL-5. geo-replication depends on a too recent version of Python. Due to an older version of OpenSSL, some of the newer functions can not be used. A fallback to previous functions is done. Unfortunately RHEL-5 does not seem to have TLSv1.2 support, so only older versions can be used. Change-Id: I672264a673f5432358d2e83b17e2a34efd9fd913 BUG: 1222317 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/10803 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* build: outdated autotools helper config.* files in dist tarfileKaleb S. KEITHLEY2015-05-311-4/+1
| | | | | | | | | | | | | | | | | | | Our jenkins release task clones the source, runs ./autogen.sh (where config.{guess,sub} come from) and ./configure, before running `make dist` to product the release glusterfs-X.Y.Z.tar.gz. The config.{guess,sub} in the tar file come from the archaic autoconf in CentOS 6.3, which is what the glusterfs jenkins is running on. We should not be shipping the (arbitrary, old) config.{guess,sub} files from our jenkins machine. Change-Id: Ib7643ae2e54d0e25c95f4e93e5dffb22cbe11523 BUG: 1223937 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/11009 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* spec: move file peer_add_secret_pub to server RPMMilind Changire2015-05-311-1/+4
| | | | | | | | | | | | | | | | peer_add_secret_pub was developed as part of geo-replication feature. glusterfind has a dependency on the peer_add_secret_pub for distributing SSH secrets. The dependency was manifest while QA testing glusterfind. peer_add_secret_pub is now moved to the server RPM to support glusterfind without creating a dependency on the geo-replication RPM Change-Id: I1345e13fd6d218eb722cd72ca1b9dd04adf4d316 BUG: 1221544 Signed-off-by: Milind Changire <mchangir@redhat.com> Reviewed-on: http://review.gluster.org/10807 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Aravinda VK <avishwan@redhat.com>
* scripts: Added script stop-all-gluster-processes.sh in rpmAravinda VK2015-05-291-0/+6
| | | | | | | | | | | | This script was not included as part of rpm. Fixed now BUG: 1204641 Change-Id: I5e559b187253cc2f4f8ea7cf8ec56a32802e5ab2 Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/10931 Reviewed-by: Kotresh HR <khiremat@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* glusterfs.spec.in: python-gluster should be 'noarch'Kaleb S. KEITHLEY2015-05-291-0/+7
| | | | | | | | | | | Change-Id: Ic4f498ce87a5a7f21b637da1b63a290b9fe89b66 BUG: 1219954 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/10846 Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com> Tested-by: NetBSD Build System Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* Build: glusterd socket file cleanup to set SElinux context properly.anand2015-05-291-0/+12
| | | | | | | | | | | | | | | | | | Issue : glusterd runs as rpm_script_t when it's executed from the rpm scriptlet, socket file created in this context is set as rpm_script_t type, glusterd unable to access socket file when it runs in glusterd_t context (glusted not cleaning socket file while stoping due to some cleanup issues, so cleanup required in rpm install). Fix: In rpm post upgrade,remove the glusterd.socket file which is created by glusterd in rpm context. so that glusterd recreates socket file when it runs in glusterd_t context. Change-Id: I57041e2e0f9d3e74e12198507a9bd47d09f4a132 BUG: 1223185 Signed-off-by: anand <anekkunt@redhat.com> Reviewed-on: http://review.gluster.org/10815 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: NetBSD Build System Tested-by: Gluster Build System <jenkins@build.gluster.com>
* spec: correct the vendor string in spec fileHumble Devassy Chirammal2015-05-281-1/+1
| | | | | | | | | | Change-Id: Id19c973092af506582741887d12fe00c85022f15 BUG: 1198849 Signed-off-by: Humble Devassy Chirammal <hchiramm@redhat.com> Reviewed-on: http://review.gluster.org/10885 Tested-by: NetBSD Build System Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* glusterfs.spec.in: move libgf{db,changelog}.pc from -api-devel to -develKaleb S. KEITHLEY2015-05-281-2/+5
| | | | | | | | | | | | | pkgconfig files in the wrong package results in unexpected package dependencies Change-Id: I0551114d09bcc3a7a73e152275175ba6c1bc0da3 BUG: 1223385 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/10843 Tested-by: NetBSD Build System Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* rpm: marker xlator should part of the server sub-packageGaurav Kumar Garg2015-05-121-1/+1
| | | | | | | | | | | | | | | | | | | | | Currently marker translator is part of extra-xlator package. Installing only the glusterfs-server package and required dependencies does not make it possible to create a volume and starte it. Starting the volume will fail. The brick logs compain that type feature/marker is not valid: W [xlator.c:192:xlator_dynload] 0-xlator: /usr/lib64/glusterfs/3.7.0beta1/xlator/features/marker.so: cannot open shared object file: No such file or directory E [graph.y:212:volume_type] 0-parser: Volume 'rvstore-marker', line 78: type 'features/marker' is not valid or not found on this machine Fix is to include the marker translator in the server package. It should not be part of extra-xlator package. Change-Id: I77fe8a0bcf7d6f1dbff62d663e840e9e45805614 BUG: 1220381 Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> Reviewed-on: http://review.gluster.org/10752 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* rpm: reduce package dependencies and add -client-xlatorsNiels de Vos2015-05-081-50/+114
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Restructuring the RPM packages in order to reduce the dependencies that get installed for glusterfs-api (mainly on request for Qemu hosts). The dependencies of these packages look roughly like this: .------------------. | glusterfs-server | '-------+----------' |\ | \ | '---------------+--------------------. | | | | v v | .----------------. .---------------. | | glusterfs-fuse | | glusterfs-api | | '--------+-------' '------+--------' | /| /| | / | / | | / | / | | / | / | | .-----------+----=---------------' | |/ | | v v v .-----------. .--------------------------. | glusterfs | | glusterfs-client-xlators | '-----------' '--------------------------' With this structure, users can install glusterfs-server, glusterfs-fuse or glusterfs-api (libgfapi) without getting any unneeded xlators or other scripts/binaries. The "glusterfs" and "glusterfsd" binary (symlinked) is now part of the glusterfs-fuse package (moved from glusterfs). This does not make a difference for glusterfs-server installations, because a server installation always needs the glusterfs-fuse package for doing internal mounts. The advantage is that glusterfs-api does not pull in any executables that get into the $PATH. This has caused confusion before when people tried to remove the (wrongly assumed) server-only "glusterfsd" binaries. URL: http://thread.gmane.org/gmane.comp.file-systems.gluster.devel/10643 Change-Id: Id03f1a634ea3c62ab7008345be92e01ccf43b1a6 BUG: 1195947 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/10554 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: NetBSD Build System Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com>
* tools/glusterfind: Rpm install dependencies addedAravinda VK2015-05-071-0/+4
| | | | | | | | | | | | | | | | Argparse Python library is available as standard library in Python 2.7 In rhel, we need to install python-argparse. Also added pyxattr dependency to the spec file. Change-Id: Ie50278eddf81e7cbf98d1e8d27e411b46676b432 Signed-off-by: Aravinda VK <avishwan@redhat.com> BUG: 1209138 Reviewed-on: http://review.gluster.org/10321 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kotresh HR <khiremat@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* build: gluster-api-devel requires libacl-develKaleb S. KEITHLEY2015-05-051-0/+1
| | | | | | | | | | | building libvirt fails Change-Id: I355879e6c6f56e49c4ee78e1a9763598acacd074 BUG: 1218625 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/10579 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* glupy: package glupy as a subpackage under gluster namespaceHumble Devassy Chirammal2015-05-041-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently glupy files resides in gluster namespace of python site packages. The other projects like libgfapi-python ..etc are evolving and need to share the gluster namespace. The current structure makes things difficult as all subpackages have its own __init__ files and other files. One subpackage can not any more own gluster namespace. The attempt is to make below structure for gluster namespace so that it is more portable and scalable for future use. <sitepackages>/gluster/ | -- __init__.py | | -- glupy | -- __init__.py -- glupy.py -- ........ | | -- gfapi | -- __init__.py -- gfapi.py -- ........ By above structure clients can import: >>> from gluster import glupy >>> from gluster import gfapi libgfapi-python project has been moved to this structure via http://review.gluster.org/#/c/9668/ Signed-off-by: Humble Devassy Chirammal <hchiramm@redhat.com> Change-Id: I54886200ddb6a4153a74d9e187aeca7cad79ef9e BUG: 1211900 Reviewed-on: http://review.gluster.org/10248 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* rpm: fix dependency on python-glusterNiels de Vos2015-05-031-2/+3
| | | | | | | | | | | | | | The glusterfs-extra-xlators tries to install python-glusterfs. This is incorrect, the package is called python-gluster. BUG: 1211848 Change-Id: Id48a63ebe893c2bab90fab37ea3e32e601fae0fa Reported-by: Meni Yakove <myakove@redhat.com> Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/10508 Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com> Tested-by: NetBSD Build System Tested-by: Gluster Build System <jenkins@build.gluster.com>
* build: Introducing python-gluster packageHumble Devassy Chirammal2015-04-301-5/+31
| | | | | | | | | | | | | | | | | Currently the gluster namespace/module is owned by glusterfs-api rpm. Because of this, other packages (extra-xlators or libgfapi-python) have to depend on glusterfs-api to get the gluster namespace. The gluster namespace should be owned by a core package.This patch introduce new package called python-gluster and moves the ownership of gluster module to python-gluster. Change-Id: Ib75ab922736f3bea6355da4d8dbec3a08b2844d5 BUG: 1211848 Signed-off-by: Humble Devassy Chirammal <hchiramm@redhat.com> Reviewed-on: http://review.gluster.org/10244 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* common-ha: delete-node implementationKaleb S. KEITHLEY2015-04-291-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | omnibus patch consisting of: + completed implemenation of delete-node (BZ 1212823) + teardown leaves /var/lib/nfs symlink (BZ 1210712) + setup copy config, teardown clean /etc/cluster (BZ 1212823) setup for copy config, teardown clean /etc/cluster: 1. on one (primary) node in the cluster, run: `ssh-keygen -f /var/lib/glusterd/nfs/secret.pem` Press Enter twice to avoid passphrase. 2. deploy the pubkey ~root/.ssh/authorized keys on _all_ nodes, run: `ssh-copy-id -i /var/lib/glusterd/nfs/secret.pem.pub root@$node` 3. copy the keys to _all_ nodes in the cluster, run: `scp /var/lib/glusterd/nfs/secret.* $node:/var/lib/glusterd/nfs/` N.B. this allows setup, teardown, etc., to be run on any node Change-Id: I9fcd3a57073ead24cd2d0ef0ee7a67c524f3d4b0 BUG: 1213933 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/10234 Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: soumya k <skoduri@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* build: make contrib/uuid dependency optionalNiels de Vos2015-04-101-0/+1
| | | | | | | | | | | | | | | | | | | On Linux systems we should use the libuuid from the distribution and not bundle and statically link the contrib/uuid/ bits. libglusterfs/src/compat-uuid.h has been introduced and should become an abstraction layer for different UUID APIs. Non-Linux operating systems should implement their compatibility layer there. Once all operating systems have an implementation in compat-uuid.h, we can remove contrib/uuid/ from the repository completely. Change-Id: I345e5357644be2521685e00358bb8c83c4ea0577 BUG: 1206587 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/10129 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* geo-rep: Copy geo-rep hook-script during source installKotresh HR2015-04-021-4/+0
| | | | | | | | | | | | | | | | | The hook-script S56glusterd-geo-rep-create-post.sh was not copying to glusterd working directory when geo-rep is installed through source. Hence the geo-rep create fails unless the script is manually copied. This patch addresses the issue by copying the hook-script during make install. Change-Id: I185a877ed720e8300f0e888ab481d0c8c23bf815 BUG: 1207201 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/10051 Reviewed-by: Aravinda VK <avishwan@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* build: require cmocka >= 1.0.1Niels de Vos2015-03-311-2/+2
| | | | | | | | | | | | | | | | | Our mem-pool unit test does a funky realloc(ptr, 0) as an alternative to free(ptr). cmocka 1.0.0 has a bug where this is not handled correctly and thinks to detect a memory leak. The next cmocka release will have this bug fixed, making our unit tests require cmocka >= 1.0.1. URL: https://cmocka.org/archive/cmocka/2015-02/0000059.html Change-Id: I3d7f9b4cf7ace3f958158425ecbcc8f176579122 BUG: 1067059 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9801 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Andreas Schneider <asn@fedoraproject.org> Tested-by: Andreas Schneider <asn@fedoraproject.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* build:change dependency for librdmacm to version >= 1.0.15Mohammed Rafi KC2015-03-301-1/+4
| | | | | | | | | | | | | Thanks to Niels for the fix Change-Id: I0954b6f498461dde2b986da9e0e45775175249c9 BUG: 1206744 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/10028 Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* build: attr package dependencyKaleb S. KEITHLEY2015-03-271-0/+4
| | | | | | | | | | | | Already fixed in the Fedora dist-git glusterfs.spec Change-Id: Icad7c4527d4b83417cbb81957e7b5da8b4d36368 BUG: 1184627 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/10016 Reviewed-by: Lalatendu Mohanty <lmohanty@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* rpm: move libgfdb to the glusterfs-server packageNiels de Vos2015-03-241-0/+6
| | | | | | | | | | | | | | | libgfdb is only used by processes that run on Gluster servers. There is no need to have this library (and its sqlite dependency) on any system that installs a glusterfs package. BUG: 1194753 Change-Id: I6b7fdc70210ef2a847efd596a0c995f0a4cf5d9b Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9983 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com> Reviewed-by: Lalatendu Mohanty <lmohanty@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* build: correctly install the snap_scheduler toolsNiels de Vos2015-03-191-3/+5
| | | | | | | | | | | | | The current way of installing the snap-scheduler tools breaks the building of RPMs. The tools should be installed in /usr/sbin and there is no need to change the attributes/permissions after the installation. Change-Id: I1b8e206748617fb000d956b1b5da52d126971c29 BUG: 1203557 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9939 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* snapshot/scheduling: A cron based scheduler for snapshot schedulingAvra Sengupta2015-03-181-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | GlusterFS volume snapshot provides point-in-time copy of a GlusterFS volume. Currently, GlusterFS volume snapshots can be easily scheduled by setting up cron jobs on one of the nodes in the GlusterFS trusted storage pool. This has a single point failure (SPOF), as scheduled jobs can be missed if the node running the cron jobs dies. The solution to the above problems is addressed in this patch. The snap_scheduler.py helper script expects the user to install the argparse python module before using it. Further details for the same are available at: http://www.gluster.org/community/documentation/index.php/Features/Scheduling_of_Snapshot Change-Id: I2c357af5b7d3e66f270d20eef50cdeecdcbe15c7 BUG: 1198027 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/9788 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Adding Libgfdb to GlusterFSJoseph Fernandes2015-03-181-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ************************************************************************* Libgfdb | ************************************************************************* Libgfdb provides abstract mechanism to record extra/rich metadata required for data maintenance, such as data tiering/classification. It provides consumer with API for recording and querying, keeping the consumer abstracted from the data store used beneath for storing data. It works in a plug-and-play model, where data stores can be plugged-in. Presently we have plugin for Sqlite3. In the future will provide recording and querying performance optimizer. In the current implementation the schema of metadata is fixed. Schema: ~~~~~~ GF_FILE_TB Table: ~~~~~~~~~~~~~~~~~ This table has one entry per file inode. It holds the metadata required to make decisions in data maintenance. GF_ID (Primary key) : File GFID (Universal Unique IDentifier in the namespace) W_SEC, W_MSEC : Write wind time in sec & micro-sec UW_SEC, UW_MSEC : Write un-wind time in sec & micro-sec W_READ_SEC, W_READ_MSEC : Read wind time in sec & micro-sec UW_READ_SEC, UW_READ_MSEC : Read un-wind time in sec & micro-sec WRITE_FREQ_CNTR INTEGER : Write Frequency Counter READ_FREQ_CNTR INTEGER : Read Frequency Counter GF_FLINK_TABLE: ~~~~~~~~~~~~~~ This table has all the hardlinks to a file inode. GF_ID : File GFID (Composite Primary Key)``| GF_PID : Parent Directory GFID (Composite Primary Key) |-> Primary Key FNAME : File Base Name (Composite Primary Key)__| FPATH : File Full Path (Its redundant for now, this will go) W_DEL_FLAG : This Flag is used for crash consistancy, when a link is unlinked. i.e Set to 1 during unlink wind and during unwind this record is deleted LINK_UPDATE : This Flag is used when a link is changed i.e rename. Set to 1 when rename wind and set to 0 in rename unwind Libgfdb API: ~~~~~~~~~~~ Refer libglusterfs/src/gfdb/gfdb_data_store.h Change-Id: I2e9fbab3878ce630a7f41221ef61017dc43db11f BUG: 1194753 Signed-off-by: Joseph Fernandes <josferna@redhat.com> Signed-off-by: Dan Lambright <dlambrig@redhat.com> Signed-off-by: Joseph Fernandes <josferna@redhat.com> Reviewed-on: http://review.gluster.org/9683 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* feature/glusterfind: A tool to find incremental changesAravinda VK2015-03-181-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Documentation is available in patch: http://review.gluster.org/#/c/9800/ A tool which helps to get list of modified files or list of all files in GlusterFS Volume using Changelog or find command. Usage ===== glusterfind --help Create: ------- glusterfind create --help The tool creates status file $GLUSTERD_WORKDIR/SESSION/VOLUME/status and records current timestamp to initiate the session. This timestamp will be used as start time for next runs. As part of create also generates ssh key and distributes to all peers. and enables build.pgfid and changelog using volume set command. Pre: ---- glusterfind pre --help This command is used to generate the list of files modified after session creation time or after last run. To get list of all files/dirs in Volume, run pre command with `--full` argument. The tool gets all nodes details using gluster volume info and runs node agent for each brick in respective nodes via ssh command. Once these node agents generate the output file, tool copies to local using scp. Merges all the output files to generate the final output file. Post: ----- glusterfind post --help After consuming the list, this sub command is called to update the session time based on pre command status file. List: ----- glusterfind list --help To view all the sessions Delete: ------- glusterfind delete --help Delete session. Known Issues ------------ 1. Deleted files will not get listed, since we can't convert GFID to Path if file/dir is deleted. 2. Only new name will get listed if Renamed. 3. All hardlinks will get listed. Change-Id: I82991feb0aea85cb6ec035fddbf80a2b276e86b0 BUG: 1193893 Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/9682 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Reviewed-by: Prashanth Pai <ppai@redhat.com> Reviewed-by: Kotresh HR <khiremat@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* NFS-Ganesha: Install scripts, config files, and resource agent scriptsKaleb S. KEITHLEY2015-03-171-1/+29
| | | | | | | | | | | | | | | | | Resubmitting after a gerrit bug bungled the merge of http://review.gluster.org/9621 (was it really a gerrit bug?) Scripts related to NFS-Ganesha are in extras/ganesha/scripts. Config files are in extras/ganesha/config. Resource Agent files are in extras/ganesha/ocf Files are copied to appropriate locations. Change-Id: I137169f4d653ee2b7d6df14d41e2babd0ae8d10c BUG: 1188184 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/9912 Tested-by: Gluster Build System <jenkins@build.gluster.com>
* geo-rep: mountbroker user managementAravinda VK2015-03-171-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Non root geo-replication setup is now simplified. This patch provides cli for mountbroker user and options management To set Options, gluster system:: execute mountbroker opt <KEY> <VALUE> # for example, gluster system:: execute mountbroker opt mountbroker-root /var/mountbroker-root gluster system:: execute mountbroker opt geo-replication-log-group geogroup gluster system:: execute mountbroker opt rpc-auth-allow-insecure on To remove option, gluster system:: execute mountbroker optdel <KEY> # for example, gluster system:: execute mountbroker optdel geo-replication-log-group To add/edit user, gluster system:: execute mountbroker user <USERNAME> <VOLUMES> # for example gluster system:: execute mountbroker user geoaccount slavevol1,slavevol2 To remove user, gluster system:: execute mountbroker userdel <USERNAME> # for example gluster system:: execute mountbroker userdel geoaccount For info, gluster system:: execute mountbroker info gluster system:: execute mountbroker -j info For JSON output add -j after mountbroker, for example, gluster system:: execute mountbroker -j user geoaccount slavevol1,slavevol2 PS: Each peer prints its own JSON output, aggregator required from consumer side BUG: 1136312 Change-Id: Ie52210c0bcc91ac2ffd3ba58988222ffca62b47f Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/9398 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: darshan n <dnarayan@redhat.com> Reviewed-by: Kotresh HR <khiremat@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* tools: Finds missing files in gluster volume given backend brickpathKotresh HR2015-03-151-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | The tool finds the missing files in a geo-replication slave volume. The tool crawls backend .glusterfs of the brickpath, which is passed as a parameter and stats each entry on slave volume mount to check the presence of file. The mount used is aux-gfid-mount, hence no path conversion is required and is fast. The tool needs to be run on every node in cluster for each brickpath of geo-rep master volume to find missing files on slave volume. The tool is generic enough and can be used in non geo-replication context as well. Most of the crawler code is leverged from Avati's xfind and is modified to crawl only .glusterfs (https://github.com/avati/xsync) Thanks Aravinda for scripts to convert gfid to path. Change-Id: I84deaaaf638f7c571ff1319b67a3440fe27da810 BUG: 1187140 Signed-off-by: Aravinda VK <avishwan@redhat.com> Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/9503 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterfs.spec.in: minor/nit changes to sync with Fedora specKaleb S. KEITHLEY2015-03-101-1/+4
| | | | | | | | | sync with fedora spec Change-Id: Iddc55fbf82e5c4690669aa5836dc109b3d3fe19a BUG: 1091408 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/7632
* posix: add ACL translation for the GF_POSIX_ACL_*_KEY xattrNiels de Vos2015-03-091-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adding support for two virtual extended attributes that are used for converting a binary POSIX ACL to a POSIX.1e long ACL text format. This makes it possible to transfer the ACL over the network to a different OS which can convert the POSIX.1e text format to its native structures. The following xattrs are sent over RPC in SETXATTR/GETXATTR procedures, and contain the POSIX.1e long ACL text format: - glusterfs.posix.acl: maps to ACL_TYPE_ACCESS - glusterfs.posix.default_acl: maps to ACL_TYPE_DEFAULT acl_from_text() (from libacl) converts the text format into an acl_t structure. This structure is then used by acl_set_file() to set the ACL in the filesystem. libacl-devel is needed for linking against libacl, so it has been added to the BuildRequires in the .spec. NetBSD does not support POSIX ACLs. Trying to get/set POSIX ACLs on a storage server running NetBSD, an error will be returned with errno set to ENOTSUP. Faking support, but not enforcing ACLs seems wrong to me. URL: http://www.gluster.org/community/documentation/index.php/Features/Improved_POSIX_ACLs BUG: 1185654 Change-Id: Ic5eb73d69190d3492df2f711d0436775eeea7de3 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9627 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: soumya k <skoduri@redhat.com> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com>
* testing: Switch to cmocka the successor of cmockery2Niels de Vos2015-03-051-2/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | This uses https://cmocka.org/ as the unit testing framework. With this change, unit testing is made optional as well. We assume there is no cmocka available while building. cmocka will be enabled by default later on. For now, to build with cmocka run: $ ./configure --enable-cmocka This change is based on the work of Andreas (replacing cmockery2 with cmocka) and Kaleb (make cmockery2 an optional build dependency). The only modifications I made, are additional #defines in unittest.h for making sure the unit tests function as expected. Change-Id: Iea4cbcdaf09996b49ffcf3680c76731459cb197e BUG: 1067059 Merged-change: http://review.gluster.org/9762/ Signed-off-by: Andreas Schneider <asn@samba.org> Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Signed-off-by: Niels de Vos <ndevos@redhat.com> Change-Id: Ia2e955481c102d5dce17695a9205395a6030e985 Reviewed-on: http://review.gluster.org/9738 Tested-by: Gluster Build System <jenkins@build.gluster.com>
* spec: correcting GlusterFS stringHumble Devassy Chirammal2015-02-251-4/+4
| | | | | | | | | | Change-Id: Ia39d81f89cf783016700c8059f6a788029ee1b13 BUG: 1075417 Signed-off-by: Humble Devassy Chirammal <hchiramm@redhat.com> Reviewed-on: http://review.gluster.org/9749 Reviewed-by: Lalatendu Mohanty <lmohanty@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* README: Adding information about Gluster dev workflowLalatendu Mohanty2015-02-251-1/+1
| | | | | | | | | | | | | | | | | | | | In the README.md (which is automatically rendered in github) there is no information about GlusterFS workflow. So community members send pull requests in github. This patch will put the workflow information, so that it would be easy for community members to know about it by looking at GlusterFS's github mirror. Change-Id: I62718f75aa26a45fe28e3e9399d1aa2338211c73 BUG: 1195336 Signed-off-by: Lalatendu Mohanty <lmohanty@redhat.com> Reviewed-on: http://review.gluster.org/9727 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com> Tested-by: Humble Devassy Chirammal <humble.devassy@gmail.com>
* build, glusterd: Add liburcu to build systemKaushal M2015-02-231-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds liburcu related checks to the build system and updates the spec file to require 'userspace-rcu'. liburcu >= 0.7 is required to build GlusterFS, but 0.8 and above is preferred. For cases when liburcu 0.7.x is the available version, some function definitions (currently just one) from liburcu-0.8.6 have been made available in /contrib/userspace-rcu/. This change was developed on the git branch at [1]. This commit is a combination of the following commits on the development branch. a5cd6bd Add userspace-rcu checks to configure.ac fe5ced3 Add URCU libs to glusterd libtool flags 1e43302 Add local definition of cds_list_add_tail_rcu for liburcu-0.7 98da755 Move local definition of cds_list_add_tail_rcu into contrib 8c44dfd Update spec file to include userspace-rcu0466e33 Rename rculist-additional.h to rculist-extra.h 947c7b3 Add rculist-extra.h to dist 19f32ad Address review comments 9605/1 [1]: https://github.com/kshlm/glusterfs/tree/urcu Change-Id: Ifbb617d0dacce8fa01214f894badb9d8cdcaf56f BUG: 1191030 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/9605 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* build: .cmd_log_history should be renamed to cmd_history.log post upgrade.Gaurav Kumar Garg2015-02-171-0/+12
| | | | | | | | | | | | | | | | While upgrading from glusterfs-version < 3.6 to glusterfs-3.6, .cmd_log_history hidden file still present in /var/log/glusterfs/ directory. With this fix it will not have .cmd_log_history hidden file and it will rename it to cmd_history.log file. Change-Id: I2c1658056ddd75ce923f100961205a3b78394466 BUG: 1165996 Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> Reviewed-on: http://review.gluster.org/9652 Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Niels de Vos <ndevos@redhat.com>
* tests: Removing rpmbuild/mock check from run-tests.shNandaja Varma2015-02-031-1/+4
| | | | | | | | | | | | | | | | | Checks for rpmbuild/mock is removed from run-tests since this check is not in the glusterfs-regression-tests package. Alongside, the dependency mock is also removed from glusterfs.spec.in as mock is only used by basic/rpm.t. Change-Id: I5a9036141d0900b3a0bedd95b8c58fb0cdc13ca1 BUG: 1178008 Signed-off-by: Nandaja Varma <nvarma@redhat.com> Reviewed-on: http://review.gluster.org/9512 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Lalatendu Mohanty <lmohanty@redhat.com> Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* build: add a tmpfiles.d config file for /run/glusterNiels de Vos2015-01-191-0/+13
| | | | | | | | | | | | | | | | | | New distrubutions have a /run directory on a volatile tmpfs filesystem. This causes /run/gluster to be removed with each reboot. A tmpfiles.d configuration is used to create the directory on boot. EL5 and EL-6 do not use /run, current Fedora versions do. By checking %{_tmpfilesdir} in the .spec, we can identify if the distribution uses tmpfiles.d. Change-Id: I231e7d6603d573cb905246558e14a51577c0eb56 BUG: 1182934 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9458 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Lalatendu Mohanty <lmohanty@redhat.com>
* build: prevent double packaging of geo-replication and other scriptsNiels de Vos2014-12-151-1/+6
| | | | | | | | | | | | | The regression-tests sub-package contains /usr/share/glusterfs/* instead of including only the needed files. This causes some of the scripts that are part of geo-replication to be packaged twice. BUG: 1169005 Change-Id: Ib452e73f3c1775b252ab257aab852ad9af857e74 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9272 Reviewed-by: Lalatendu Mohanty <lmohanty@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* glusterfs.spec.in: use upstream logrotate exclusivelyKaleb S. KEITHLEY2014-10-281-25/+5
| | | | | | | | | | | retiring Fedora dist-git *.logrotate files Change-Id: I6a94aac6f45573216de3f9e673d10db6de5ccb98 BUG: 1126832 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/8418 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* heal: glfs-heal implementationPranith Kumar K2014-10-151-0/+1
| | | | | | | | | | | Thanks a lot to Niels for helping me to get build stuff right. Change-Id: I634f24d90cd856ceab3cc0c6e9a91003f443403e BUG: 1147462 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/6529 Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* spec: Change summary of glusterfs to distributed file system.hchiramm2014-09-261-2/+2
| | | | | | | | | BUG:1146519 Change-Id: I9b24321d9e677b535f8d79691862cf919553d635 Signed-off-by: Humble Chirammal <hchiramm@redhat.com> Reviewed-on: http://review.gluster.org/8844 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Lalatendu Mohanty <lmohanty@redhat.com>
* glusterfs.spec.in: add psmisc to -server subpackageKaleb S. KEITHLEY2014-09-261-2/+11
| | | | | | | | | | | | | | | | | | apparently some minimalist installs omit psmisc psmisc is needed for the killall in various %pre and %post scriptlets smarter logic for restarting glusterd in %post server Change-Id: I505573b364cc27321bb4117a387bdf71fe3ce310 BUG: 1146426 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-by: Humble Chirammal <hchiramm@redhat.com> Reviewed-by: Lalatendu Mohanty <lmohanty@redhat.com> Tested-by: Lalatendu Mohanty <lmohanty@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/8867 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* build: remove /sbin/ldconfig as interpreterBala.FA2014-09-251-4/+11
| | | | | | | | | | | | | | | using /sbin/ldconfig as interpreter in pre/post/postun throws error /sbin/ldconfig: relative path `1' used to build cache BUG: 1145989 Change-Id: Ic321f200d92d2e49ff797965a006f63f483d29be Signed-off-by: Bala.FA <barumuga@redhat.com> Reviewed-on: http://review.gluster.org/8835 Reviewed-by: Lalatendu Mohanty <lmohanty@redhat.com> Tested-by: Lalatendu Mohanty <lmohanty@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* RPM spec file: Fixed the description for glusterfsLalatendu Mohanty2014-09-051-12/+15
| | | | | | | | | | | | | Previously description was saying glusterfs is a clustered file-system which changed to ditsributed file-system. Change-Id: I3ee80024ba317e912890ceff2080b82ce111be95 Signed-off-by: Lalatendu Mohanty <lmohanty@redhat.com> Reviewed-on: http://review.gluster.org/8619 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
generated by cgit (git 2.34.1) at 2024-05-01 16:19:37 +0000