summaryrefslogtreecommitdiffstats
path: root/configure.ac
Commit message (Collapse)AuthorAgeFilesLines
* build: remove dht2, it is not ready for 3.8Niels de Vos2016-05-241-5/+0
| | | | | | | | | | | | Change-Id: I5663dee8da018b74e81c9fb3b618d837861ef06f BUG: 1317278 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/14518 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* configure: Prevent glupy installation outside $prefixAravinda VK2016-05-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | glupy was installed in the global path outside the prefix path, even if --prefix is passed. ./configure --prefix=/usr/local make install Expected: ${DESTDIR}${prefix}/lib64/python<VERSION>/site-packages/gluster Actual: ${DESTDIR}/usr/lib64/python<VERSION>/site-packages/gluster prefix was not honoured. With this patch, glupy will be installed inside the prefix path. Cherry picked from commit 85de0c83392d861ba47c97664ff73fd7f8705a3a: > BUG: 1335717 > Change-Id: I810dd8d2d6c403540d4b738f5ab54237c7358bf6 > Signed-off-by: Aravinda VK <avishwan@redhat.com> > Reviewed-on: http://review.gluster.org/14315 > Smoke: Gluster Build System <jenkins@build.gluster.com> > Reviewed-by: Niels de Vos <ndevos@redhat.com> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > Reviewed-by: Jeff Darcy <jdarcy@redhat.com> > CentOS-regression: Gluster Build System <jenkins@build.gluster.com> BUG: 1336136 Change-Id: I810dd8d2d6c403540d4b738f5ab54237c7358bf6 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/14337 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* Leases: Add a server side xlator to handle lease requestsPoornima G2016-04-291-1/+3
| | | | | | | | | | | | | | | | | Before this patch, there was an effort to implement leases in upcall xlator, these patches by Soumya and me can be found @ http://review.gluster.org/#/c/10084/ Change-Id: I926728c7ec690727a8971039b240655882d02059 BUG: 1319992 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/11643 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* geo-rep: Fix gluster binary invocation while running as cronAravinda VK2016-04-291-0/+17
| | | | | | | | | | | | | | | When scheduler script was executed as cron, it was unable to detect the Gluster binaries. BUG: 1331658 Change-Id: Ic9c533586ed9a472765f69aa2f87d004c46d4340 Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/14111 CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* rpc: split FOPs enum from glusterfs.hNiels de Vos2016-04-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Moving the enumeration of FOPs and some of the other parts that are defining the network protocol to the rpc/xdr/ section. These structures need some care when modifications are made, moving them out of the common glusterfs.h header helps with that. The protocol definition structures are generated in a new glusterfs-fops header. This file is present in rpc/xdr/src/ and libglusterfs/src/, it is a little ugly, but prevents the need to update all Makefile.am files with the additional -I option for finding the new header file. The generation of the .c and .h files from the .x descriptions needed small modifications to accommodate these changes. The build/xdrgen script was improved slightly for this. The .c and .h files are incorrectly in the $(top_srcdir), instead of $(top_builddir). This is an existing issue, and bug 1330604 has been filed to get that addressed. Change-Id: I98fc8cf7e4b631082c7b203b5a0a77111bec1fb9 BUG: 1328502 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/14032 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* performance/decompounder: Introducing decompounder xlatorAnuradha Talur2016-04-251-0/+2
| | | | | | | | | | | | | | This xlator decompounds the compound fops received, and executes them serially. Change-Id: Ieddcec3c2983dd9ca7919ba9d7ecaa5192a5f489 BUG: 1303829 Signed-off-by: Anuradha Talur <atalur@redhat.com> Reviewed-on: http://review.gluster.org/13577 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* nsr/jbr: Renaming nsr to jbrAvra Sengupta2016-04-251-4/+4
| | | | | | | | | | | | | | | As per community consensus, we have decided to rename nsr to jbr(Journal-Based-Replication). This is the patch to rename the "nsr" code to "jbr" Change-Id: Id2a9837f2ec4da89afc32438b91a1c302bb4104f BUG: 1328043 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/13899 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* dht2: Creation of experimental shell for dht2Shyam2016-03-241-0/+5
| | | | | | | | | | Change-Id: I1aa3ea25f99d36fa2356edaa4c3132386adef303 Signed-off-by: Shyam <srangana@redhat.com> Reviewed-on: http://review.gluster.org/13397 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* qemu-block: deprecated/defunct, remove from treeKaleb S KEITHLEY2016-03-071-33/+0
| | | | | | | | | | | | | | | | | qemu-block xlator is not used by anyone, or so I'm told. It's also substantially out of date. There's little reason to keep it in our sources. (And FedoraProject doesn't like bundled software either.) Change-Id: I4aeb2fdfd962ec6d93de6bae126874121272220a Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/13473 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* experimental: add fdl (Full Data Logging) translatorJeff Darcy2016-02-131-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | NSR needs logging that is different than our existing changelog in several ways: * Full data, not just metadata * Pre-op, not post-op * High performance * Supports the concept of time-bounded "terms" Others (for example EC) might need the same thing. This patch adds such a translator. It also adds code to dump the resulting journals, and to replay them using syncops, plus (very rudimentary) tests for all of the above. Change-Id: I29680a1b4e0a9e7d5a8497fef302c46434b86636 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/12450 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* NSR : nsr server code generation patchJeff Darcy2016-02-111-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The NSR-server with this patch, appoints the first node on every replica subvolume, as the leader for that subvolume. On receiving a 'write' fop, the leader first checks if there is quorum in the replica subvolume to proceeed. In case there isn't it fails with EROFS. If there is quorum, the leader forwards the fop to the followers. The followers on receiving the fop, perform the operation, and based on the success or failure of the outcome send a +ve or a -ve ack to the leader. The leader after receiving acks from the followers performs a quorum check of the acks, to see if it should even try to perform the fop. If quorum is not being met, and the leader's outcome wouldn't affect quorum, then it would send -ve ack to the client without even performing the fop. If quorum is being met, the leader will then try the fop on itself, and based on it's outcome perform a quorum check of all the acks received (this time, including it's own). Based on the result of the quorum check (irrespective of the outcome on the leader), a +ve or -ve ack is send back to the client. Change-Id: I860654b74c53e9b139b37dba43848e5504df6dce Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/12705 Smoke: Gluster Build System <jenkins@build.gluster.com> Tested-by: Jeff Darcy <jdarcy@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* posix: implement seek() FOPNiels de Vos2016-02-101-0/+8
| | | | | | | | | | | | | | The only lseek() options we need are SEEK_HOLE and SEEK_DATA. Change-Id: I5d15533c53fd710497f97c3cb4a8ea29fba47271 BUG: 1220173 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/11484 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* build: Filter -D_FORTIFY_SOURCE from CFLAGSRaghavendra Talur2016-02-091-75/+58
| | | | | | | | | | | | | | | | | We use python-config to get recommended CFLAGS. It provides -D_FORTIFY_SOURCE=2 by default that conflicts with our --enable-debug option or a developer provided no-optimization option. Hence, filter it out from default CFLAGS. Change-Id: Id80196baeb55415b1ea334e7b17143e56dfbadb3 BUG: 1283948 Co-authored-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Signed-off-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-on: http://review.gluster.org/12707 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* NSR: nsr client code generation patchJeff Darcy2016-02-091-0/+2
| | | | | | | | | | | | | | | | | | This version of the client checks if the error returned is EREMOTE or ENOTCONN, and if not unwnds the error back In case of a EREMOTE or ENOTCONN error, it retries on all the bricks in the replica subgroup, and if the error still persists, it waits for a sec before going through the same exercise again. Change-Id: I916bed32f0820f381dd60fdde3d05b71c69a34dc Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/12388 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* Allow builds with older version of URCUKaushal M2016-02-081-3/+9
| | | | | | | | | | | | | | | | | | | | Debian Wheezy, which has urcu-0.6 doesn't ship the pkg-config files for urcu. So when I was checking support, I didn't bother testing Wheezy or urcu-0.6 as I didn't want to spend time trying to build without pkg-config support. But it turns out that urcu-0.6 supports the APIs being used by GlusterD. This patch improves the configure script to manually search and set URCU build flags if pkg-config search fails. Change-Id: I8c2ae748b58e94d89aef61da6fb3c660710a5f3b BUG: 1304348 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/13345 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* tests: add seek program for testing SEEK_DATA/SEEK_HOLE over FUSENiels de Vos2016-02-051-0/+1
| | | | | | | | | | | | | | Note that this only works on Linux kernel 4.5 and newer. The program is not run by a test-case because of this. BUG: 1220173 Change-Id: Ifdee3c793e33f9d763940130e8d01a61eae5498a Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/13291 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* gfapi: add test for glfs_lseek() SEEK_DATA/SEEK_HOLENiels de Vos2016-02-041-1/+2
| | | | | | | | | | | | | Change-Id: I8d0573ed8b2ea5ce976ad140a24be7974dbad0e3 BUG: 1220173 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/11486 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: jiffin tony Thottan <jthottan@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* build: place glupy under $prefix while installingNiels de Vos2016-01-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | Regression testing on FreeBSD fails due to this error: --- install-pyglupyPYTHON --- /usr/home/jenkins/root/workspace/freebsd-smoke/install-sh -c -d '/usr/local/lib/python2.7/site-packages/gluster/glupy' mkdir: /usr/local/lib/python2.7/site-packages/gluster: Permission denied mkdir: /usr/local/lib/python2.7/site-packages/gluster: Permission denied *** [install-pyglupyPYTHON] Error code 1 The installation prefix is set to "/build/install" and glupy should be placed there as well. The default to "/usr/local" is incorrect. Change-Id: I166412a271576f2344aecec94c7835f0fe9b1cf3 BUG: 1198849 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/13208 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* POSIX shell compliance: == operatorEmmanuel Dreyfus2016-01-141-1/+1
| | | | | | | | | | | | POSIX shell uses = and not ==, the later being a bash extension. BUG: 1129939 Change-Id: I9d51225de99c1607894211e68808b63100696fef Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/13209 Reviewed-by: Michael Adam <obnox@samba.org> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org>
* build: export minimum symbols from xlators for correct resolutionKaleb S KEITHLEY2015-12-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | Revisiting http://review.gluster.org/#/c/11814/, which unintentionally introduced warnings from libtool about the xlator .so names. According to [1], the -module option must appear in the Makefile.am file(s); if -module is defined in a macro, e.g. in configure(.ac), then libtool will not recognize that this is a module and will emit a warning. [1] http://www.gnu.org/software/automake/manual/automake.html#Libtool-Modules Change-Id: Ifa5f9327d18d139597791c305aa10cc4410fb078 BUG: 1248669 Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/13003 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: soumya k <skoduri@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* build: Remove redundant options from GF_CFLAGSAnoop C S2015-12-011-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | While configuring, GF_CFLAGS is being populated with redudndant options as follows: Normal mode: GF_CFLAGS = -g -O2 -g -O2 -Wformat -Werror=format-security \ -g -O2 -g -O2 -Wformat -Werror=format-security \ -Werror=implicit-function-declaration Debug mode: GF_CFLAGS = -g -O2 -g -O0 -DDEBUG -Wformat -Werror=format-security \ -g -O2 -g -O0 -DDEBUG -Wformat -Werror=format-security \ -Werror=implicit-function-declaration This patch is to remove this redundancy of options. Change-Id: Idf6f2536c2a8ae24ba257681fbe9dfdb8bfa4f19 BUG: 1198849 Signed-off-by: Anoop C S <anoopcs@redhat.com> Reviewed-on: http://review.gluster.org/12714 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* core: Add experimental xlator directoryShyam2015-11-181-0/+14
| | | | | | | | | | | | | | | | | | Added an experimental xlator directory under ./xlators/ The intent of this directory is presented in the README.md that accompanies this commit. This directory can be disabled from being compiled using, - configure --disable-experimental Change-Id: I047f380c91a082d111432f8bbdbd4d7bdcbaa809 Signed-off-by: Shyam <srangana@redhat.com> Reviewed-on: http://review.gluster.org/12321 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Avra Sengupta <asengupt@redhat.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* build: fix ecdh.h and dh.h depsMilind Changire2015-11-161-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | openssl.ecdh.h and openssl/dh.h are not available on all platforms. This patch adds check to autoconf and updates relevant source files. Add missing #include "config.h" to socket.c to make HAVE_OPENSSL_DH_H and HAVE_OPENSSL_ECDH_H macros available. Definitions for UTIME_OMIT and UTIME_NOW in contrib/qemu/util/oslib-posix.c have been selected from /usr/include/bits/stat.h on Fedora 22 SSL context options SSL_OP_NO_TICKET and SSL_OP_NO_COMPRESSION are now conditionally set by testing their presence. glusterfs.spec.in file now adds CFLAGS=-DUSE_INSECURE_OPENSSL for RHEL < 6 in the %build section. Change-Id: Ie32a950dad77bb0f09b4ba53edb3e1f3147056f3 BUG: 1258883 Signed-off-by: Milind Changire <mchangir@redhat.com> Reviewed-on: http://review.gluster.org/12517 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* build: Remove systemtap references from sourceAnoop C S2015-11-101-33/+0
| | | | | | | | | | | | | | | | We don't actually support systemtap. And so it is confusing to have --enable-systemtap configure option in configure.ac. This patch removes the systemtap option and corresponding references from other files which include INSTALL, spec.in, docs etc. Change-Id: I719c22ca36f41a2faca156f8e41daea44e64b65e BUG: 1198849 Signed-off-by: Anoop C S <anoopcs@redhat.com> Reviewed-on: http://review.gluster.org/12565 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* build: Fix autoconf warningsAnoop C S2015-11-091-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch avoids the following warnings on running autogen script . . . Running autoconf... configure.ac:896: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body ../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from... configure.ac:896: the top level . . . This change uses AC_LINK_IFELSE for checking the atomic built-in function support. Since AC_COMPILE_IFELSE checks for syntactical errors only, we need to use AC_LINK_IFELSE to achieve the same which is more appropriate. Reference links: [1] https://autotools.io/forwardporting/autoconf.html [2] http://www.gnu.org/software/autoconf/manual/autoconf.html#Generating-Sources [3] http://www.gnu.org/software/autoconf/manual/autoconf.html#Running-the-Compiler Change-Id: I4597f2976623496745b66f98bb78a0c9f1b07f79 BUG: 1198849 Signed-off-by: Anoop C S <anoopcs@redhat.com> Reviewed-on: http://review.gluster.org/12351 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* xlators: add JSON FOP statistics dumps every N secondsRichard Wareing2015-10-081-0/+13
| | | | | | | | | | | | | | | | | | | | | | | Summary: - Adds a thread to the io-stats translator which dumps out statistics every N seconds where N is configurable by an option called "diagnostics.stats-dump-interval" - Thread cleanly starts/stops when translator is unloaded - Updates macros to use "Atomic Builtins" (e.g. intel CPU extentions) to use memory barries to update counters vs using locks. This should reduce overhead and prevent any deadlock bugs due to lock contention. Test Plan: - Test on development machine - Run prove -v tests/basic/stats-dump.t Change-Id: If071239d8fdc185e4e8fd527363cc042447a245d BUG: 1266476 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/12209 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Avra Sengupta <asengupt@redhat.com>
* build: export minimum symbols from xlators for correct resolutionKaleb S. KEITHLEY2015-09-241-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | We've been lucky that we haven't had any symbol collisions until now. Now we have a collision between the snapview-client's svc_lookup() and libntirpc's svc_lookup() with nfs-ganesha's FSAL_GLUSTER and libgfapi. As a short term solution all the snapview-client's FOP methods were changed to static scope. See http://review.gluster.org/11805. This works in snapview-client because all the FOP methods are defined in a single source file. This solution doesn't work for other xlators with FOP methods defined in multiple source files. To address this we link with libtool's '-export-symbols $symbol-file' (a wrapper around `ld --version-script ...` --- on linux anyway) and only export the minimum required symbols from the xlator sharedlib. N.B. the libtool man page says that the symbol file should be named foo.sym, thus the rename of *.exports to *.sym. While foo.exports worked, we will follow the documentation. Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> BUG: 1248669 Change-Id: I1de68b3e3be58ae690d8bfb2168bfc019983627c Reviewed-on: http://review.gluster.org/11814 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: soumya k <skoduri@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* firewall/spec: Create glusterfs firewall service if firewalld installed.anand2015-09-101-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It creates glusterfs firewall service during installation. glusterfs service : It contains all default ports which needs to be opened. During installation glusterfs.xml is copied into firewall service directory(/usr/lib/firewalld/services/). Note: 1.For bricks: It opens the 512 ports, if brick is running out side this range(>49664) then admin need to open the port for that brick. 2.By default this service is not enabled in any of zone. To enable this service(glusterfs) in firewall: 1. Get active zone(s) in node firewall-cmd --get-active-zones 2. Attached this service(glusterfs) to zone(s) firewall-cmd --zone=<zone_name> --add-service=glusterfs --To apply runtime firewall-cmd --permanent --zone=<zone_name> --add-service=glusterfs --To apply permanent Note: we can also use firewall-config which gives GUI to configure firewall. Change-Id: Id97fe620c560fd10599511d751aed11a99ba4da5 BUG: 1253967 Signed-off-by: anand <anekkunt@redhat.com> Reviewed-on: http://review.gluster.org/11989 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* build: Mac OS X build issues, ACLsKaleb S. KEITHLEY2015-09-091-2/+2
| | | | | | | | | | | Mac OS X doesn't support POSIX ACLs. Change-Id: I875cd2c0403a0665f1f7572b4d28eb5835958e7f BUG: 1238798 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/11518 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* build: Mac OS X build issues, configure.acKaleb S. KEITHLEY2015-07-061-7/+15
| | | | | | | | | | | Mac has sqlite3, but no sysconf pkgconfig Change-Id: I516613656ea3877c1a019438352b3ef8b62da1f5 BUG: 1238796 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/11517 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* build: improve detection of new OpenSSL featuresNiels de Vos2015-06-111-2/+3
| | | | | | | | | | | | | | | | | | Building on Mac OS X revealed that the current check for CRYPTO_THREADID_set_callback() availability in OpenSSL is not correct. There also does not seem to be a guarantee that TLSv1_2_method() is available when TLS1_2_VERSION is #define'd. Change-Id: I21508065fc181a1c74bee4fd6d23bb5bdf7cea7a BUG: 1222317 Original-author: Kaleb KEITHLEY <kkeithle@redhat.com> Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/11140 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com>
* build: fix compiling on older distributionsNiels de Vos2015-06-031-19/+30
| | | | | | | | | | | | | | | | | | | | | | | data-tiering is disabled on RHEL-5 because it depends on a too new SQLite version. This change also prevents installing some of files that are used by geo-replication, which is also not available on RHEL-5. geo-replication depends on a too recent version of Python. Due to an older version of OpenSSL, some of the newer functions can not be used. A fallback to previous functions is done. Unfortunately RHEL-5 does not seem to have TLSv1.2 support, so only older versions can be used. Change-Id: I672264a673f5432358d2e83b17e2a34efd9fd913 BUG: 1222317 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/10803 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* build: do not #include "config.h" in each fileNiels de Vos2015-05-291-1/+1
| | | | | | | | | | | | | | | | | | Instead of including config.h in each file, and have the additional config.h included from the compiler commandline (-include option). When a .c file tests for a certain #define, and config.h was not included, incorrect assumtions were made. With this change, it can not happen again. BUG: 1222319 Change-Id: I4f9097b8740b81ecfe8b218d52ca50361f74cb64 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/10808 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* glupy: remove debug test in libpython runtime search path detectionEmmanuel Dreyfus2015-05-091-1/+1
| | | | | | | | | | | | | | | | A configure test was recently added to add libpython runtime search path to glupy.so xlator. The vesion committed was a debug test, it searched pythonxx and not python to check for failure. Fix by removing the xx debug test in python's name. BUG: 1129939 Change-Id: I7b691be17fc2a2c812f68710869b1a9a85ced84c Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/10732 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: NetBSD Build System Tested-by: Gluster Build System <jenkins@build.gluster.com>
* glupy: fix tuntime search path and python module directory layoutEmmanuel Dreyfus2015-05-071-1/+5
| | | | | | | | | | | | | | | | | | | | 1) The glupy.so xlator should embed the runtime search path for the python libraries. Unfortunately, python-config does not gives the appprioate flags, therefore we need to also use pkg-config to obtain them 2) Fix the glupy python module directory layout so that python can import the module without problem That two fixes seems to let glupy.t pass on NetBSD again. BUG: 1129939 Change-Id: I397aa726ab8bf7d91fa0d6d870a30910a5f4a5d9 Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/10616 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* build: configure: automake defaults to max filename length=99 charsKaleb S. KEITHLEY2015-04-271-1/+1
| | | | | | | | | | | | | | | | | | | | | automake's default rule for making tar files invokes tar with options to use Unix V7 tar file format, which has a maximum FQ pathname length of 99 characters. Some of the new tests in .../tests/bugs/... have names that are longer than 99 chars. These files are dropped from the dist tarfile. automake can be configured to use a newer (POSIX 2001) tar format that does not have limits on the length of file names. Change-Id: I2f3f239e410c66aa13b1257dc734691741b7c667 BUG: 1215486 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/10392 Tested-by: NetBSD Build System Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com> Reviewed-by: Justin Clift <justin@gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* build: correct the version in glusterfs-api.pcNiels de Vos2015-04-241-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | The version in glusterfs-api.pc has moved backwards, breaking existing versioned dependencies in QEMU. The following table contains the GlusterFS version and the version for glusterfs-api.pc: .------------------------. | GlusterFS | pkg-config | |-----------+------------| | 3.4.x | 4.3.4.x | | 3.5.x | 6.3.5.x | | 3.6.x | 7.3.6.x | | 3.7.x | 7.3.7.x | | master | 7.x.y.z | '------------------------' BUG: 1211836 Change-Id: I62168a0ab4f0c78e61987371ae75a0d2dd56ced8 URL: http://thread.gmane.org/gmane.comp.emulators.qemu/330176 Reported-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/10308 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* configure.ac: print yes/no instead of 1/0 in outputRaghavendra Talur2015-04-131-1/+3
| | | | | | | | | | | | | | | | POSIX_ACLS support in output of configure shows 0/1 instead of no/yes. Added BUILD_POSIX_ACLS to make value consistent. Change-Id: Ife728d0d03ff0eb03d4389fefc04507a76205ccd BUG: 1185654 Signed-off-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-on: http://review.gluster.org/9848 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: NetBSD Build System
* build: make contrib/uuid dependency optionalNiels de Vos2015-04-101-12/+24
| | | | | | | | | | | | | | | | | | | On Linux systems we should use the libuuid from the distribution and not bundle and statically link the contrib/uuid/ bits. libglusterfs/src/compat-uuid.h has been introduced and should become an abstraction layer for different UUID APIs. Non-Linux operating systems should implement their compatibility layer there. Once all operating systems have an implementation in compat-uuid.h, we can remove contrib/uuid/ from the repository completely. Change-Id: I345e5357644be2521685e00358bb8c83c4ea0577 BUG: 1206587 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/10129 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* build: require cmocka >= 1.0.1Niels de Vos2015-03-311-8/+3
| | | | | | | | | | | | | | | | | Our mem-pool unit test does a funky realloc(ptr, 0) as an alternative to free(ptr). cmocka 1.0.0 has a bug where this is not handled correctly and thinks to detect a memory leak. The next cmocka release will have this bug fixed, making our unit tests require cmocka >= 1.0.1. URL: https://cmocka.org/archive/cmocka/2015-02/0000059.html Change-Id: I3d7f9b4cf7ace3f958158425ecbcc8f176579122 BUG: 1067059 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9801 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Andreas Schneider <asn@fedoraproject.org> Tested-by: Andreas Schneider <asn@fedoraproject.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* build:change dependency for librdmacm to version >= 1.0.15Mohammed Rafi KC2015-03-301-0/+7
| | | | | | | | | | | | | Thanks to Niels for the fix Change-Id: I0954b6f498461dde2b986da9e0e45775175249c9 BUG: 1206744 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/10028 Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* features/bit-rot: Implementation of bit-rot xlatorVenky Shankar2015-03-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the "Signer" -- responsible for signing files with their checksums upon last file descriptor close (last release()). The event notification facility provided by the changelog xlator is made use of. Moreover, checksums are as of now SHA256 hash of the object data and is the only available hash at this point of time. Therefore, there is no special "what hash to use" type check, although it's does not take much to add various hashing algorithms to sign objects with. Signatures are stored in extended attributes of the objects along with the the type of hashing used to calculate the signature. This makes thing future proof when other hash types are added. The signature infrastructure is provided by bitrot stub: a little piece of code that sits over the POSIX xlator providing interfaces to "get or set" objects signature and it's staleness. Since objects are signed upon receiving release() notification, pre-existing data which are "never" modified would never be signed. To counter this, an initial crawler thread is spawned The crawler scans the entire brick for objects that are unsigned or "missed" signing due to the server going offline (node reboots, crashes, etc..) and triggers an explicit sign. This would also sign objects when bit-rot is enabled for a volume and/or after upgrade. Change-Id: I1d9a98bee6cad1c39c35c53c8fb0fc4bad2bf67b BUG: 1170075 Original-Author: Raghavendra Bhat <raghavendra@redhat.com> Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/9711 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Bitrot StubVenky Shankar2015-03-241-0/+3
| | | | | | | | | | | | | Bitrot stub implements object versioning required for identifying signature freshness. More details about versioning is explained as a part of the "bitrot feature documentation" patch. Change-Id: I2ad70d9eb109ba4a12148ab8d81336afda529ad9 BUG: 1170075 Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/9709 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* features/shard: Introducing sharding translatorKrutika Dhananjay2015-03-191-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Based on the high-level design by Anand V. Avati which can be found @ https://gist.github.com/avati/af04f1030dcf52e16535#sharding-xlator-stripe-20 Still to-do: * complete implementation of inode write fops - [f]truncate, zerofill, fallocate, discard * introduce transaction mechanism in inode write fops * complete readv * Handle open with O_TRUNC * Handle unlinking of all shards during unlink/rename * Compute total ia_size and ia_blocks in lookup, readdirp, etc * wind fsync/flush on all shards Note: Most of the items above are related. Once we come up with a clean way to determine the last shard/shard count for a file/file size and the mgmt of sparse regions of the file, implementing them becomes trivial. Change-Id: Id871379b53a4a916e4baa2e06f197dd8c0043b0f BUG: 1200082 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/9841 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* afr: arbiter xlatorRavishankar N2015-03-191-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds the arbiter translator into the tree. This is a server side xlator used for replica 3 volumes. It sits above posix and will be loaded on the 3rd (last) brick of every afr subvolume in a replica 3 configuration. It intercepts inode read/write operations: reads are unwound with ENOTCONN, inode writes are unwound with success without actually passing them down to posix. Metadata operations are allowed to pass through. The CLI for creating a 3 way replica with arbiter is also added but kept disabled (A 'normal' 3 way replica is created instead). This patch is a part of the arbiter logic implementation for 3 way AFR, details of which can be found at http://review.gluster.org/#/c/9656/ Change-Id: I395b81f49d5da52c466daf5c8518f1bbad9c16fa BUG: 1199985 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/9840 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Adding ChangeTimeRecorder(CTR) Xlator to GlusterFSJoseph Fernandes2015-03-191-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ********************************************************************** ChangeTimeRecorder(CTR) Xlator | ********************************************************************** ChangeTimeRecorder(CTR) is server side xlator(translator) which sits just above posix xlator. The main role of this xlator is to record the access/write patterns on a file residing the brick. It records the read(only data) and write(data and metadata) times and also count on how many times a file is read or written. This xlator also captures the hard links to a file(as its required by data tiering to move files). CTR Xlator is the consumer of libgfdb. To Enable/Disable CTR Xlator: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ gluster volume set <volume-name> features.ctr-enabled {on/off} To Enable/Disable Frequency Counter Recording in CTR Xlator: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ gluster volume set <volume-name> features.record-counters {on/off} Change-Id: I5d3cf056af61ac8e3f8250321a27cb240a214ac2 BUG: 1194753 Signed-off-by: Joseph Fernandes <josferna@redhat.com> Reviewed-on: http://review.gluster.org/9935 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* libglusterfs/rot-buffs: rotational buffersVenky Shankar2015-03-181-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces rotational buffers aiming at the classic multiple producer and multiple consumer problem. A fixed set of buffer list is allocated during initialization, where each list consist of a list of buffers. Each buffer is an iovec pointing to a memory region of fixed allocation size. Multiple producers write data to these buffers. A buffer list starts with a single buffer (iovec) and allocates more when required (although this can be preallocatd in multiples of k). rot-buffs allow multiple producers to write data parallely with a bit of extra cost of taking locks. Therefore, it's much suited for large writes. Multiple producers are allowed to write in the buffer parallely by "reserving" write space for selected number of bytes and returning pointer to the start of the reserved area. The write size is selected by the producer before it starts the write (which is often known). Therefore, the write itself need not be serialized -- just the space reservation needs to be done safely. The other part is when a consumer kicks in to consume what has been produced. At this point, a buffer list switch is performed. The "current" buffer list pointer is safely pointed to the next available buffer list. New writes are now directed to the just switched buffer list (the old buffer list is now considered out of rotation). Note that the old buffer still may have producers in progress (pending writes), so the consumer has to wait till the writers are drained. Currently this is the slow path for producers (write completion) and needs to be improved. Currently, there is special handling for cases where the number of consumers match (or exceed) the number of producers, which could result in writer starvation. In this scenario, when a consumers requests a buffer list for consumption, a check is performed for writer starvation and consumption is denied until at least another buffer list is ready of the producer for writes, i.e., one (or more) consumer(s) completed, thereby putting the buffer list back in rotation. [ NOTE: I've not performance tested this producer-consumer model yet. It's being used in changelog for event notification. The list of buffers (iovecs) are directly passed to RPC layer. ] Change-Id: I88d235522b05ab82509aba861374a2312bff57f2 BUG: 1170075 Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/9706 Tested-by: Vijay Bellur <vbellur@redhat.com>
* snapshot/scheduling: A cron based scheduler for snapshot schedulingAvra Sengupta2015-03-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | GlusterFS volume snapshot provides point-in-time copy of a GlusterFS volume. Currently, GlusterFS volume snapshots can be easily scheduled by setting up cron jobs on one of the nodes in the GlusterFS trusted storage pool. This has a single point failure (SPOF), as scheduled jobs can be missed if the node running the cron jobs dies. The solution to the above problems is addressed in this patch. The snap_scheduler.py helper script expects the user to install the argparse python module before using it. Further details for the same are available at: http://www.gluster.org/community/documentation/index.php/Features/Scheduling_of_Snapshot Change-Id: I2c357af5b7d3e66f270d20eef50cdeecdcbe15c7 BUG: 1198027 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/9788 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Adding Libgfdb to GlusterFSJoseph Fernandes2015-03-181-7/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ************************************************************************* Libgfdb | ************************************************************************* Libgfdb provides abstract mechanism to record extra/rich metadata required for data maintenance, such as data tiering/classification. It provides consumer with API for recording and querying, keeping the consumer abstracted from the data store used beneath for storing data. It works in a plug-and-play model, where data stores can be plugged-in. Presently we have plugin for Sqlite3. In the future will provide recording and querying performance optimizer. In the current implementation the schema of metadata is fixed. Schema: ~~~~~~ GF_FILE_TB Table: ~~~~~~~~~~~~~~~~~ This table has one entry per file inode. It holds the metadata required to make decisions in data maintenance. GF_ID (Primary key) : File GFID (Universal Unique IDentifier in the namespace) W_SEC, W_MSEC : Write wind time in sec & micro-sec UW_SEC, UW_MSEC : Write un-wind time in sec & micro-sec W_READ_SEC, W_READ_MSEC : Read wind time in sec & micro-sec UW_READ_SEC, UW_READ_MSEC : Read un-wind time in sec & micro-sec WRITE_FREQ_CNTR INTEGER : Write Frequency Counter READ_FREQ_CNTR INTEGER : Read Frequency Counter GF_FLINK_TABLE: ~~~~~~~~~~~~~~ This table has all the hardlinks to a file inode. GF_ID : File GFID (Composite Primary Key)``| GF_PID : Parent Directory GFID (Composite Primary Key) |-> Primary Key FNAME : File Base Name (Composite Primary Key)__| FPATH : File Full Path (Its redundant for now, this will go) W_DEL_FLAG : This Flag is used for crash consistancy, when a link is unlinked. i.e Set to 1 during unlink wind and during unwind this record is deleted LINK_UPDATE : This Flag is used when a link is changed i.e rename. Set to 1 when rename wind and set to 0 in rename unwind Libgfdb API: ~~~~~~~~~~~ Refer libglusterfs/src/gfdb/gfdb_data_store.h Change-Id: I2e9fbab3878ce630a7f41221ef61017dc43db11f BUG: 1194753 Signed-off-by: Joseph Fernandes <josferna@redhat.com> Signed-off-by: Dan Lambright <dlambrig@redhat.com> Signed-off-by: Joseph Fernandes <josferna@redhat.com> Reviewed-on: http://review.gluster.org/9683 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* feature/glusterfind: A tool to find incremental changesAravinda VK2015-03-181-2/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Documentation is available in patch: http://review.gluster.org/#/c/9800/ A tool which helps to get list of modified files or list of all files in GlusterFS Volume using Changelog or find command. Usage ===== glusterfind --help Create: ------- glusterfind create --help The tool creates status file $GLUSTERD_WORKDIR/SESSION/VOLUME/status and records current timestamp to initiate the session. This timestamp will be used as start time for next runs. As part of create also generates ssh key and distributes to all peers. and enables build.pgfid and changelog using volume set command. Pre: ---- glusterfind pre --help This command is used to generate the list of files modified after session creation time or after last run. To get list of all files/dirs in Volume, run pre command with `--full` argument. The tool gets all nodes details using gluster volume info and runs node agent for each brick in respective nodes via ssh command. Once these node agents generate the output file, tool copies to local using scp. Merges all the output files to generate the final output file. Post: ----- glusterfind post --help After consuming the list, this sub command is called to update the session time based on pre command status file. List: ----- glusterfind list --help To view all the sessions Delete: ------- glusterfind delete --help Delete session. Known Issues ------------ 1. Deleted files will not get listed, since we can't convert GFID to Path if file/dir is deleted. 2. Only new name will get listed if Renamed. 3. All hardlinks will get listed. Change-Id: I82991feb0aea85cb6ec035fddbf80a2b276e86b0 BUG: 1193893 Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/9682 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Reviewed-by: Prashanth Pai <ppai@redhat.com> Reviewed-by: Kotresh HR <khiremat@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>