summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* cluster/dht: Make rebalance throttle option tuned by numberSusant Palai2017-04-295-30/+152
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current rebalance throttle options: lazy/normal/aggressive may not always be sufficient for the purpose of throttling. In our recent test, we observed for certain setups, normal and aggressive modes behaved similarly consuming full disk bandwidth. So in cases like this admin should be able to tune it down(or vice versa) depending on the need. Along with old throttle configurations, thread counts are tuned based on number. e.g. gluster v set vol-name cluster-rebal.throttle 5. Admin can tune up/down between 0 and the number of cores available. Note: For heterogenous servers, validation will fail on the old server if "number" is given for throttle configuration. The message looks something like this: "volume set: failed: Staging failed on vm2. Error: cluster.rebal-throttle should be {lazy|normal|aggressive}" Test: Manual test by logging active thread number after reconfiguring throttle option. testcase: tests/basic/distribute/throttle-rebal.t Change-Id: I46e3cde546900307831028b344ecf601fd9b02c3 BUG: 1438370 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: https://review.gluster.org/16980 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* dht: send lookup on old name inside rename with bname and pargfidSusant Palai2017-04-292-10/+63
| | | | | | | | | | | | | | | | | | | | | | | | | | | Inside rename, a lookup is done on the source name to make sure that the file is there. But we used to do a gfid based lookup and hence, even if the source name was renamed to a new name from some other client, lookup will be successful as server3_3_lookup will fetch the new path based on the gfid. So even if the source file does not exist any more rename will carry on, and as server3_3_link(destination is hashed to a different brick other than source cached scenario) also does gfid based resolve, it wont detect that the source name does not exist and hardlink creation will be successful (since gfid based resolve will get the new dentry). To solve this problem, do a name based lookup inside rename. So that rename will fail right away if the source does not exist. Change-Id: Ieba8bdd6675088dbf18de90ed4622df043d163bd BUG: 1412135 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: https://review.gluster.org/16375 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: N Balachandran <nbalacha@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* cluster/dht: rebalance perf enhancementSusant Palai2017-04-293-109/+247
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: Throttle settings "normal" and "aggressive" for rebalance did not have performance difference. normal mode spawns $(no. of cores - 4)/2 threads and aggressive spawns $(no. of cores - 4) threads. Though aggressive mode has twice the number of threads compared to that of normal mode, there was no performance gain when switched to aggressive mode from normal mode. RCA: During the course of debugging the above problem, we tried assigning migration job to migration threads spawned by rebalance, rather than synctasks(as there is more overhead associated to manage the task queue and threads). This gave us a significant improvement over rebalance under synctasks. This patch does not really gurantee that there will be a clear performance difference between normal and aggressive mode, but this patch certainly maximized the disk utilization for 1GBfiles run. Results: Test enviroment: Gluster Config: Number of Bricks: 2 (one brick per disk(RAID-6 12 disk)) Bricks: Brick1: server1:/brick/test1/1 Brick2: server2:/brick/test1/1 Options Reconfigured: performance.readdir-ahead: on server.event-threads: 4 client.event-threads: 4 1000 files with 1GB each were created/renamed such that all files will have server1 as cached and server2 as hashed, so that all files will be migrated. Test machines had 24 cores each. Results with/without synctask based migration: ----------------------------------------------- mode normal(10threads) aggressive(20threads) timetaken 0:55:30 (h:m:s) 0:56:3 (h:m:s) withsynctask timetaken with migrator 0:38:3 (h:m:s) 0:23:41 (h:m:s) threads From above table it can be seen that, there is a clear 2x perf gain between rebalance with synctask vs rebalance with migrator threads. Additionally this patch modifies the code so that caller will have the exact error number returned by dht_migrate_file(earlier the errno meaning was overloaded). This will help avoiding scenarios where migration failure due to ENOENT, can result in rebalance abort/failure. Change-Id: I8904e2fb147419d4a51c1267be11a08ffd52168e BUG: 1420166 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: https://review.gluster.org/16427 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: N Balachandran <nbalacha@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* api: fix two typos of GFAPI_PUBLIC function defineKinglong Mee2017-04-292-2/+2
| | | | | | | | | | | Change-Id: I2f9915b3572c4cbce6748e99a037daba439a187e BUG: 1446273 Signed-off-by: Kinglong Mee <mijinlong@open-fs.com> Reviewed-on: https://review.gluster.org/17112 Reviewed-by: Niels de Vos <ndevos@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* glusterd: Fix removing pmap entry on rpc disconnectPrashanth Pai2017-04-283-9/+11
| | | | | | | | | | | | | | | | | | | | | | | | Problem: The following line of code intended to remove pmap entry for the connection during disconnects: pmap_registry_remove (this, 0, NULL, GF_PMAP_PORT_NONE, xprt); However, no pmap entry will have it's type set to GF_PMAP_PORT_NONE at any point in time. So a call to pmap_registry_search_by_xprt() in pmap_registry_remove() will always fail to find a match. Fix: Optionally ignore pmap entry's type in pmap_registry_search_by_xprt(). BUG: 1193929 Change-Id: I705f101739ab1647ff52a92820d478354407264a Signed-off-by: Prashanth Pai <ppai@redhat.com> Reviewed-on: https://review.gluster.org/17129 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us>
* build: conditionally build legacy gNFS server and associated sub-packagingKaleb S. KEITHLEY2017-04-2810-65/+107
| | | | | | | | | | | | | | | | | | | Plus some additional logic in glusterd to ensure gnfs (glusterfs) daemons are never started if server/nfs xlator is not installed. As a service, nfs is still initialized. The glusterfs-gnfs RPM may be installed or uninstalled independent of anything else, including on a system where gluster is actively running, so the existence of the xlator is always tested before trying to start gnfs. Change-Id: I56743ad1cb36a84917226d7d26cb9d015d441e66 BUG: 1326219 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: https://review.gluster.org/16958 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* cluster/dht: Pass the correct xdata in fremovexattr fopKrutika Dhananjay2017-04-281-8/+4
| | | | | | | | | | | Change-Id: Id84bc87e48f435573eba3b24d3fb3c411fd2445d BUG: 1440051 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: https://review.gluster.org/17126 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* fuse: clean up mount flag processingCsaba Henk2017-04-275-25/+151
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In general, when one invokes a mount helper program -- basically anything that mounts something based on its command line, so thinking of mount(8), mount.<fs-type> or fusermount, but also of FUSE servers in general, including glusterfs -- the command line arguments that are to affect mount(2) are mapped to a bitmask called the mount flags, which is passed to mount(2), so that the kernel can interpret the flag bits and adjusts properties of the mount accordingly. There is a traditional syntax for this mechanism as implemented in mount(8): one passes "-ocomma,separated,mount,options" and the individual option name strings are mapped to flag bits in mount(8). FUSE further explores this idea and typically the FUSE server command lines allow further option names to be used in the "-ooption,name,list" which are then separated from the kernel sanctioned option names (to which we'll refer as "system mount options") and are passed to a platform specific lower level fuse mount helper interface. The separation of system mount option names and FUSE specific option names is also platform specific, so the general mount interface function, which in case of glusterfs is gf_fuse_mount(), should abstract this away. Therefore we change the signature of this function from int gf_fuse_mount (const char *mountpoint, char *fsname, unsigned long mountflags, char *mnt_param, pid_t *mtab_pid, int status_fd); to int gf_fuse_mount (const char *mountpoint, char *fsname, char *mnt_param, pid_t *mtab_pid, int status_fd); and deal with flag extraction in platform specific mount code. Note that the sole purpose of the mountflags argument was to indicate read-only mounting. The other system mount option names were expected to reside in the comma-separated mnt_param string, but they were not properly processed (see the referred BUG). With the new gf_fuse_mount signature read-only mounting is to be indicated as a "ro" component in mnt_param. - For Darwin, which has a dedicated, separate gf_fuse_mount implementation, gf_fuse_mount was ignoring mountflags, so only the signature had to to be adjusted. However, as bonus, we gain read-only support for Darwin, which was missing so far, given that it was indicated via the ignored mountflags. Darwin's low level mount helper relies on the "ro" component of the option string, which agrees with the new calling convention of gf_fuse_mount. - On Linux, system mount option name handling (apart from the distinguished read-only option) used to have the inadvertent side effect of adding "nosuid,nodev" as indicated in BUG; since Ia89d975d1e27fcfa5ab2036ba546aa8fa0d2d1b0 this side effect is removed, but system mount option name handling was left broken (passing system mount options other than "ro" fails to mount). - On other platforms, system mount option name handling is broken (expect for the distinguished read-only option). As of this change, in the general (non-Darwin) implementation of gf_fuse_mount we take care of proper separation of system mount names and their conversion to mount flags. For Linux, we adopt the conversion table from FUSE upstream. For other systems we just provide a best effort to support those system mount options which are understood across all Unices (nosuid,nodev,noatime,noexec,ro). (This can be improved later to provide proper plaform support.) BUG: 1297182 Change-Id: I5d10b5df46feba7a02bf5bf1018db69e6b52260a Signed-off-by: Csaba Henk <csaba@redhat.com> Reviewed-on: https://review.gluster.org/16313 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Amar Tumballi <amarts@redhat.com>
* extras/hooks: Use double quotes while using [..]Anoop C S2017-04-271-1/+1
| | | | | | | | | | | | | | | This avoids the following warning when first operand is null [: =: unary operator expected Change-Id: I5439d8f60a6d9e30e6ba04c16c3de2096a87c38f BUG: 1446126 Signed-off-by: Anoop C S <anoopcs@redhat.com> Reviewed-on: https://review.gluster.org/17127 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us>
* packaging: /var/run/gluster owner gluster:gluster(0775) for statedumpsKaleb S. KEITHLEY2017-04-272-2/+16
| | | | | | | | | | | | | | | gfapi has the ability to take statedumps. However, if the application using gfapi isn't running with root privs the statedump file can't be written to the default location, i.e. /var/run/gluster. Change-Id: I97d8919ef8b8cd4775e1a206f939a2bf0046786d BUG: 1445569 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: https://review.gluster.org/17122 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* build: ensure autoconf template expansions resolve variablesCsaba Henk2017-04-271-7/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Make sure the following autotools managed variables: GLUSTERFS_LIBEXECDIR GLUSTERD_MISCDIR GLUSTERD_VOLFILE LOCALSTATEDIR get expanded to literal paths when the configure script generates the installed versions of certain text files from *.in templates. This change is partly implemented by restoring some of the "eval echo $variable" style forced expansions in configure that were removed in If5219cadc51ae316f7ba2e2831d739235c77902d. BUG: 1444228 Change-Id: I3b31b1259c5101252bbc37861683894e6eae29e6 Signed-off-by: Csaba Henk <csaba@redhat.com> Reviewed-on: https://review.gluster.org/17096 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Tested-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* libglusterfs/stack.h: reduce duplication of codeAmar Tumballi2017-04-272-112/+25
| | | | | | | | | | | | | | | | * Use STACK_UNWIND_STRICT everywhere. * Provide STACK_WIND_COMMON as both STACK_WIND_COOKIE and STACK_WIND differ by just 1 line and 1 option. Updates gluster/glusterfs#137 Change-Id: Ifbb6b9c4702b02f4a02834824f509fd10c78f0ce Signed-off-by: Amar Tumballi <amarts@redhat.com> Reviewed-on: https://review.gluster.org/16915 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us>
* cluster/dht: Document detailing transactions in dhtRaghavendra G2017-04-271-0/+272
| | | | | | | | | | Change-Id: If69d67ce5dffe966fbc1e4ad834ca110e1e0b745 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Updates: #191 Reviewed-on: https://review.gluster.org/16876 CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org>
* io-stats: fix some memory leak after finiKinglong Mee2017-04-271-0/+4
| | | | | | | | | | | | Change-Id: Id057b711d7f615c6d2db1ebbca2f17d0afacb2ae BUG: 1444023 Signed-off-by: Kinglong Mee <mijinlong@open-fs.com> Reviewed-on: https://review.gluster.org/17089 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Niels de Vos <ndevos@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* geo-rep: Fix mount cleanupKotresh HR2017-04-272-2/+7
| | | | | | | | | | | | | | On corner cases, mount cleanup might cause worker crash. Fixing the same. Change-Id: I38c0af51d10673765cdb37bc5b17bb37efd043b8 BUG: 1433506 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: https://review.gluster.org/17015 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Aravinda VK <avishwan@redhat.com>
* nfs: Check for null buf, and set op_errno to EIO not 0Richard Wareing2017-04-261-0/+6
| | | | | | | | | | | | | | | | | | | | Summary: - Prevent crashes for the case where "getattr" actually failed and returned with a NULL buf, but the op_errno was set to 0. - This is a cherry-pick of D1571184 Signed-off-by: Shreyas Siravara <sshreyas@fb.com> Change-Id: Ia2d6ad7539df714f9420dcf063c7c14e727bb7e3 BUG: 1428064 Reviewed-on: http://review.gluster.org/16152 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kevin Vigor <kvigor@fb.com> Reviewed-on: https://review.gluster.org/16803 Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Jeff Darcy <jeff@pl.atyp.us> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us>
* nfs: Tear down transports for requests that arrive before the volume is ↵Shreyas Siravara2017-04-261-0/+43
| | | | | | | | | | | | | | | | | | | | | | initialized Summary: - Disconnects RPC transports for requests that cannot be serviced because volumes are not ready. - This is a cherry-pick of D2991403 Signed-off-by: Shreyas Siravara <sshreyas@fb.com> Change-Id: I07ff0795b81d25624541ff981b5f2586d078e9a6 BUG: 1428068 Reviewed-on: http://review.gluster.org/16154 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Kevin Vigor <kvigor@fb.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-on: https://review.gluster.org/16805 Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Jeff Darcy <jeff@pl.atyp.us> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us>
* api: free the xattr data after using in glfs_volfile_fetchKinglong Mee2017-04-261-0/+2
| | | | | | | | | | | | | | Change-Id: I89a7df93039e367301fd70df722c13f1d8b3484b Signed-off-by: Kinglong Mee <mijinlong@open-fs.com> Reviewed-on: https://review.gluster.org/17091 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Prashanth Pai <ppai@redhat.com> Reviewed-by: Poornima G <pgurusid@redhat.com> Tested-by: Poornima G <pgurusid@redhat.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us>
* cluster/dht Remove redundant logs in dht rmdirN Balachandran2017-04-261-8/+7
| | | | | | | | | | | | | | | Removing redundant logs were introduced in https://review.gluster.org/#/c/17065/ Change-Id: I0d6055488b51a13c91d2121e87f653cdb94888b0 BUG: 1445590 Signed-off-by: N Balachandran <nbalacha@redhat.com> Reviewed-on: https://review.gluster.org/17118 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Susant Palai <spalai@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* nl-cache: Fix the issue in refd_inode counting and prune the cachePoornima G2017-04-263-6/+13
| | | | | | | | | | | | | Change-Id: I5b9beb8502667bc3876385900bc01b6491348716 BUG: 1442569 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: https://review.gluster.org/17110 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* feature/dht: Directory synchronizationKotresh HR2017-04-2611-1141/+1898
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Design doc: https://review.gluster.org/16876 Directory creation is now synchronized with blocking inodelk of the parent on the hashed subvolume followed by the entrylk on the hashed subvolume between dht_mkdir, dht_rmdir, dht_rename_dir and lookup selfheal mkdir. To maintain internal consistency of directories across all subvols of dht, we need locks. Specifically we are interested in: 1. Consistency of layout of a directory. Only one writer should modify the layout at a time. A writer (layout setting during directory heal as part of lookup) shouldn't modify the layout while there are readers (all other fops like create, mkdir etc., which consume layout) and readers shouldn't read the layout while a writer is in progress. Readers can read the layout simultaneously. Writer takes a WRITE inodelk on the directory (whose layout is being modified) across ALL subvols. Reader takes a READ inodelk on the directory (whose layout is being read) on ANY subvol. 2. Consistency of directory namespace across subvols. The path and associated gfid should be same on all subvols. A gfid should not be associated with more than one path on any subvol. All fops that can change directory names (mkdir, rmdir, renamedir, directory creation phase in lookup-heal) takes an entrylk on hashed subvol of the directory. NOTE1: In point 2 above, since dht takes entrylk on hashed subvol of a directory, the transaction itself is a consumer of layout on parent directory. So, the transaction is a reader of parent layout and does an inodelk on parent directory just like any other layout reader. So a mkdir (dir/subdir) would: > Acquire a READ inodelk on "dir" on any subvol. > Acquire an entrylk (dir, "subdir") on hashed subvol of "subdir". > creates directory on hashed subvol and possibly on non-hashed subvols. > UNLOCK (entrylk) > UNLOCK (inodelk) NOTE2: mkdir fop while setting the layout of the directory being created is considered as a reader, but NOT a writer. The reason is for a fop which can consume the layout of a directory to come either of the following conditions has to be true: > mkdir syscall from application has to complete. In this case no need of synchronization. > A lookup issued on the directory racing with mkdir has to complete. Since layout setting by a lookup is considered as a writer, only one of either mkdir or lookup will set the layout. Code re-organization: All the lock related routines are moved to "dht-lock.c" file. New wrapper function is introduced to take blocking inodelk followed by entrylk 'dht_protect_namespace' Updates #191 Change-Id: I01569094dfbe1852de6f586475be79c1ba965a31 Signed-off-by: Kotresh HR <khiremat@redhat.com> BUG: 1443373 Reviewed-on: https://review.gluster.org/15472 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org>
* libglusterfs: accept random volname in glusterfs_graph_prepare()Niels de Vos2017-04-265-28/+160
| | | | | | | | | | | | | | | | | | When the call to glfs_new("volname") passes a name for the volume and it does not match the name of the subvolume in the graph, glfs_init() will fail. This is easily reproducible by a gfapi program that loads the volume from a .vol file, and not from a GlusterD server. Change-Id: I33e77fbee7d12eaefe7c384fad6aecfa3582ea5a BUG: 1425623 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: https://review.gluster.org/16796 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Prashanth Pai <ppai@redhat.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* debug/sink: add xlator to aid in resource leak debuggingNiels de Vos2017-04-2510-1/+313
| | | | | | | | | | | | | | | | | | | | | | This new xlator does not allocate any resources on init(). This makes it a good option to use for debugging xlator releated resources leaks on fini(). By putting the sink xlator as single xlator in a .vol file, and loading it through gfapi, we can investigate the resource leaks that are happening through gfapi (and the Gluster core). By extending the .vol file with additional xlators, it is possible to analyze resource leaks of single xlators. Change-Id: Idb5faa861b623dd5b2a988b181e669b0d52c2a0e BUG: 1425623 Fixes: #176 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: https://review.gluster.org/16806 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* cluster/dht: correct space check for rebalanceSusant Palai2017-04-251-1/+1
| | | | | | | | | | | | | | | | | | | | With rebalance doing fallocate on destination, we don't need to add file size to the "destination available space" to decide whether to migrate the file or not. Notes: Fallocate would have already occupied the file size space on destination Change-Id: If7f6a6654e6257726680cf20d618482a6e9095a6 BUG: 1441508 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: https://review.gluster.org/17104 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: N Balachandran <nbalacha@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* cli: Adding warning message while creating a replica 2 volumekarthik-us2017-04-251-0/+18
| | | | | | | | | | | | | | | | | Warn the CLI about ending up in split-brain situation with a replica 2 volume. Display arbiter and replica 3 are recommended option to avoid this and point to the document on split-brain and ways to deal with it. Change-Id: I7f31f3c74818d440a684b3130bc5ccdc72258f01 BUG: 1431963 Signed-off-by: karthik-us <ksubrahm@redhat.com> Reviewed-on: https://review.gluster.org/16899 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* api: fix bad release of dict causes memory leakKinglong Mee2017-04-251-2/+4
| | | | | | | | | | | | | Change-Id: Ic7169fd05aff7bf46108e8ac7b1f29688a7f2358 Signed-off-by: Kinglong Mee <mijinlong@open-fs.com> Reviewed-on: https://review.gluster.org/17092 Tested-by: Poornima G <pgurusid@redhat.com> Reviewed-by: Poornima G <pgurusid@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Prashanth Pai <ppai@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Amar Tumballi <amarts@redhat.com>
* remove redundant function definitionJungyeon Yoon2017-04-251-3/+0
| | | | | | | | | | | | | | | | | function definition is duplicated erase second sys_ftruncate() definition No test cases Change-Id: I3eead1380b527b8b0e480f45b39e0c4bc9b2b92a Signed-off-by: Jungyeon Yoon <jungyeon.yoon@gmail.com> Reviewed-on: https://review.gluster.org/17106 Smoke: Gluster Build System <jenkins@build.gluster.org> Tested-by: Prashanth Pai <ppai@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us>
* build: correct bogus date in RPM specCsaba Henk2017-04-251-1/+1
| | | | | | | | | | | | | | | | | | | | In the RPM spec changelog there is an entry wth the following date: Wed Feb 7 2017 However, Feb 7 2017 was Tuesday. In this change we correct the day of the date. BUG: 1444941 Change-Id: I073bfe878e0a21d446a80c2f4ee045facba3e82b Signed-off-by: Csaba Henk <csaba@redhat.com> Reviewed-on: https://review.gluster.org/17100 Tested-by: Kaleb KEITHLEY <kkeithle@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* cluster/ec: Implement self-heal-window_size optionSunil Kumar Acharya2017-04-254-3/+21
| | | | | | | | | | | | | | | | Fix implements the heal window size option for EC. This option control the maximum size of read/write operation carried out in self-heal process. BUG: 1441491 Change-Id: I6c0ef65c9ca18b0828f91b319d4f52ac5b77d0d8 Signed-off-by: Sunil Kumar Acharya <sheggodu@redhat.com> Reviewed-on: https://review.gluster.org/17098 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* glusterd/geo-rep: Fix snapshot create in geo-rep setupKotresh HR2017-04-241-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | glusterd persists geo-rep sessions in glusterd info file which is represented by dictionary 'volinfo->gsync_slaves' in memory. Glusterd also maintains in memory active geo-rep sessions in dictionary 'volinfo->gsync_active_slaves' whose key is "<slave_url>::<slavhost>". When glusterd is restarted while the geo-rep sessions are active, it builds the 'volinfo->gsync_active_slaves' from persisted glusterd info file. Since slave volume uuid is added to "voinfo->gsync_slaves" with the commit "http://review.gluster.org/13111", it builds it with key "<slave_url>::<slavehost>:<slavevol_uuid>" which is wrong. So during snapshot pre-validation which checks whether geo-rep is active or not, it always says it is ACTIVE, as geo-rep stop would not deleted this key. Fixed the same in this patch. Change-Id: I185178910b4b8a62e66aba406d88d12fabc5c122 BUG: 1443977 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: https://review.gluster.org/17093 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* cluster/dht: Pass the req dict instead of NULL in dht_attr2()Krutika Dhananjay2017-04-243-54/+71
| | | | | | | | | | | | | | | | | | | | | This bug was causing VMs to pause during rebalance. When qemu winds down a STAT, shard fills the trusted.glusterfs.shard.file-size attribute in the req dict which DHT doesn't wind its STAT fop with upon detecting the file has undergone migration. As a result shard doesn't find the value to this key in the unwind path, causing it to fail the STAT with EINVAL. Also, the same bug exists in other fops too, which is also fixed in this patch. Change-Id: Id7823fd932b4e5a9b8779ebb2b612a399c0ef5f0 BUG: 1440051 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: https://review.gluster.org/17085 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* packaging: no firewalld-filesystem before el7.3Kaleb S. KEITHLEY2017-04-221-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Attempting to build on RHEL or CentOS 7.2 will fail because there is no firewalld-filesystem RPM. (This probably holds true for older versions of Fedora too, although the versions where this would apply are so old and so far gone as to be (nearly) meaningless. The firewalld rpm in 7.3 has a Requires: firewalld-filesystem. In addition to other things, the firewalld-filesystem rpm provides rpm build time macros (a strange place for them actually, there ought to be a firewalld-devel subpackage instead). Florian Festi, one of the Fedora RPM/YUM/DNF devs, strongly suggests that even in 7.3 the correct way to get firewalld-filesystem is to use BuildRequires: firewalld. N.B. That someone might try to install 7.3-built RPMs on their 7.2 system is beside the point. Change-Id: Iac8cc74a3345acaaed45af4c14e141b7a1711f84 BUG: 1443959 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: https://review.gluster.org/17094 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* api: free all dynamic memory returned from xdr_to_genericKinglong Mee2017-04-211-1/+4
| | | | | | | | | | | Change-Id: I01235ffca80683e69e99da09a9fc1a6d3ffdcb65 Signed-off-by: Kinglong Mee <mijinlong@open-fs.com> Reviewed-on: https://review.gluster.org/17090 Tested-by: Poornima G <pgurusid@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us> Smoke: Gluster Build System <jenkins@build.gluster.org>
* debug/error-gen: Use STACK_WIND_TAIL instead of STACK_WINDZhou Zhengping2017-04-211-566/+87
| | | | | | | | | | | | | | | | | Also remove unnecessary fop cbks, which are no longer necessary. 1.We don't need to call STACK_WIND if we care nothing in cbk stack, so I use STACK_WIND_TAIL instead of STACK_WIND without new a frame 2.Fix several indent problems 3.Fix return value issues in init and reconfigure Change-Id: Id57a68fec39b5b47cd4ff77664399ed3ef1d3888 Signed-off-by: Zhou Zhengping <johnzzpcrystal@gmail.com> Reviewed-on: https://review.gluster.org/17062 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us> Smoke: Gluster Build System <jenkins@build.gluster.org>
* cluster/dht: rm -rf fails if dir has stale linkto filesN Balachandran2017-04-211-45/+203
| | | | | | | | | | | | | | | | | | | rm -rf <dir> fails with ENOENT if dir contains a lot of stale linkto files. This is because a single readdirp is sent as part of the rmdir which would return and delete only as many linkto files on the bricks as would fit in one readdirp buffer. Running rm -rf <dir> multiple times will eventually delete all the files. The fix sends readdirp on each subvol until no more entries are returned. Change-Id: I447f2d193de4bd8ac16e4541c6b919d22250e39e BUG: 1442724 Signed-off-by: N Balachandran <nbalacha@redhat.com> Reviewed-on: https://review.gluster.org/17065 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* cluster/afr: GFID split brain resolution with favorite-child-policykarthik-us2017-04-203-45/+390
| | | | | | | | | | | | | | | | | | | | | | | | | Problem: Currently the automatic split brain resolution with favorite child policy is not resolving the GFID split brains. Fix: When there is a GFID split brain and the favorite child policy is set to size/mtime/ctime/majority, based on the policy decide on the source and sinks. Delete the entry from the sinks and recreate it from the source. Mark the appropriate pending attributes and resolve the GFID split brain. When the heal takes place it will complete the pending heals and reset the attributes. Change-Id: Ie30e5373f94ca6f276745d9c3ad662b8acca6946 BUG: 1430719 Signed-off-by: karthik-us <ksubrahm@redhat.com> Reviewed-on: https://review.gluster.org/16878 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Ravishankar N <ravishankar@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* glusterd: set conn->reconnect to null on timer cancellationAtin Mukherjee2017-04-201-0/+1
| | | | | | | | | | | Change-Id: Ic48e6652f431daeb0db027660f6c9de16d893f08 BUG: 1443896 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: https://review.gluster.org/17088 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us>
* Implement negative lookup cachePoornima G2017-04-2014-1/+2274
| | | | | | | | | | | | | | | | | | | | | Before creating any file negative lookups(1 in Fuse, 4 in SMB etc.) are sent to verify if the file already exists. By serving these lookups from the cache when possible, increases the create performance by multiple folds in SMB access and some percentage in Fuse/NFS access. Feature page: https://review.gluster.org/#/c/16436 Updates #82 Change-Id: Ib1c0e7ac7a386f943d84f6398c27f9a03665b2a4 BUG: 1442569 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: https://review.gluster.org/16952 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* scripts: Update rfc.sh to prompt for a github issue on RFE commitsShyam2017-04-191-0/+82
| | | | | | | | | | | | | | | | | | | | | | | If a commit does not contain a bug check with the committer if this is an RFE (or such) and prompt to amend the commit with a github issue that relates to the change. Also, give some specifics on what string to add to refer to an issue. This change is meant to encourage committers to add github issues and hence will not enforce the same, IOW the check can be ignored and code can still be submitted. Reviewers would hence be responsible to check for the same. Change-Id: Id382247a787a96d55be6be554332a1b7ccde6bcd BUG: 1428036 Signed-off-by: Shyam <srangana@redhat.com> Reviewed-on: https://review.gluster.org/17032 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* cluster/dht: Skip file migration if the subvol that meets min-free-diskSusant Palai2017-04-193-25/+92
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | criteria happens to be the same subvol containing data-file Rebalance need to figure out a new subvol in case the hashed subvol does not have enough space. In the process of figuring out the new subvol, we need to ignore the source subvol, otherwise it will lead to data loss. Test: Manual Ran the following sizeof /tmp/1: 1.5GB sizeof /brick/1: 16GB sizeof /tmp/2: 1.5GB <start> glusterd; gluster v create test1 vm1:/brick/1 vm1:/tmp/1; gluster v start test1; mount -t glusterfs vm1:test1 /mnt; for i in {1..2000} do dd if=/dev/zero of=/mnt/file$i bs=1KB count=1 &> /dev/null; done gluster v add-brick test1 vm1:/tmp/2 gluster v set test1 min-free-disk 12GB gluster v remove-brick test1 vm1:/tmp/1 star <end> file count and data were intact. Change-Id: Ib8fc8467a3d48a7c12958824c4f0b88e160b86c1 BUG: 1441508 Signed-off-by: Susant Palai <spalai@redhat.com> Reviewed-on: https://review.gluster.org/17064 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* features/bit-rot-stub: bring in optional versioningRaghavendra Bhat2017-04-187-59/+314
| | | | | | | | | | | | | | | | * As of now bit-rot-stub does versioning always. This leads lots of getxattr calls being made in lookups. So make object versioning optional. Change-Id: I83713e45ae59fb28004bb3cfa008f2d69edebbfa BUG: 1359599 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: https://review.gluster.org/14442 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* afr: don't do a post-op on a brick if op failedRavishankar N2017-04-182-6/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | Problem: In afr-v2, self-blaming xattrs are not there by design. But if the FOP failed on a brick due to an error other than ENOTCONN (or even due to ENOTCONN, but we regained connection before postop was wound), we wind the post-op also on the failed brick, leading to setting self-blaming xattrs on that brick. This can lead to undesired results like healing of files in split-brain etc. Fix: If a fop failed on a brick on which pre-op was successful, do not perform post-op on it. This also produces the desired effect of not resetting the dirty xattr on the brick, which is how it should be because if the fop failed on a brick, there is no reason to clear the dirty bit which actually serves as an indication of the failure. Change-Id: I5f1caf4d1b39f36cf8093ccef940118638caa9c4 BUG: 1438255 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: https://review.gluster.org/16976 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* api: Fix incorrect strcmp() during fs initialisationKrutika Dhananjay2017-04-182-4/+4
| | | | | | | | | | | | | | Just chanced upon this while reading graph switch code in libgfapi. Change-Id: Ie62b410c22e6d0768a24187c5d587b6d3fc996bf Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: https://review.gluster.org/16319 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Amar Tumballi <amarts@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* worm: add check for internal processes in ftruncate()Amar Tumballi2017-04-182-3/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch fixes the recently seen issues with worm_sh.t test. RCA: - $ git log --oneline xlators/features/read-only/src/worm.c 1b01bdc worm: allow Self-heal-Daemon to perform some operations c5a4a77 features/worm: Adding implementation for ftruncate - These two patches were merged in reverse order of their submission, and hence the check added for internal processes got missed in new fop 'ftruncate()'. The worm_sh.t passed the tests as while that patch got submitted there was no ftruncate() in worm xlator. Change-Id: I81a8a45fa2679917a2c859c4f5224a2c3edbc784 BUG: 1423413 Signed-off-by: Amar Tumballi <amarts@redhat.com> Reviewed-on: https://review.gluster.org/17048 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Zhou Zhengping <johnzzpcrystal@gmail.com> Reviewed-by: David Spisla <david.spisla@iternity.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* gfapi: Fix inode ref leak in anonymous fd I/O APIsSoumya Koduri2017-04-181-0/+6
| | | | | | | | | | | | | | | | | In the APIs to do I/Os using anonymous fd, there is a ref taken for inode which hasn't been unreferenced post the operation. This shall result in the leak. Change-Id: I75ea952a6b2df58c385f4f53398e5562f255248d BUG: 1438738 Signed-off-by: Soumya Koduri <skoduri@redhat.com> Reviewed-on: https://review.gluster.org/16989 Reviewed-by: Prashanth Pai <ppai@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: jiffin tony Thottan <jthottan@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* glusterd: Fix snapshot failure in non-root geo-rep setupKotresh HR2017-04-181-2/+5
| | | | | | | | | | | | | | | | | | | | Geo-replication session directory name has the form '<mastervol>_<slavehost>_<slavevol>'. But in non-root geo-replication setup, while preparing geo-replication session directory name, glusterd is including 'user@' resulting in "<mastervol>_<user@slavehost>_<slavevol>". Hence snapshot is failing to copy geo-rep specific session files. Fixing the same. Change-Id: Id214d3186e40997d2827a0bb60d3676ca2552df7 BUG: 1442760 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: https://review.gluster.org/17067 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Amar Tumballi <amarts@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Aravinda VK <avishwan@redhat.com>
* gfapi: prevent off-by-one buffer overrun in glfs_sysrq()Niels de Vos2017-04-181-5/+5
| | | | | | | | | | | | | | | | | Coverity found a potential buffer overrun in the strncat() usage for logging the help message with glfs_sysrq(). This seems to be an off-by-one mistake and should be addressed by reducing the initial size of the remainder calculation. Change-Id: Ide14add1cb28e5200d2c0df6b3a5154999ef3ca9 BUG: 789278 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: https://review.gluster.org/17024 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Amar Tumballi <amarts@redhat.com>
* dht: Add readdir-ahead in rebalance graph if parallel-readdir is onPoornima G2017-04-185-5/+81
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Issue: The value of linkto xattr is generally the name of the dht's next subvol, this requires that the next subvol of dht is not changed for the life time of the volume. But with parallel readdir enabled, the readdir-ahead loaded below dht, is optional. The linkto xattr for first subvol, when: - parallel readdir is enabled : "<volname>-readdir-head-0" - plain distribute volume : "<volname>-client-0" - distribute replicate volume : "<volname>-afr-0" The value of linkto xattr is "<volname>-readdir-head-0" when parallel readdir is enabled, and is "<volname>-client-0" if its disabled. But the dht_lookup takes care of healing if it cannot identify which linkto subvol, the xattr points to. In dht_lookup_cbk, if linkto xattr is found to be "<volname>-client-0" and parallel readdir is enabled, then it cannot understand the value "<volname>-client-0" as it expects "<volname>-readdir-head-0". In that case, dht_lookup_everywhere is issued and then the linkto file is unlinked and recreated with the right linkto xattr. The issue is when parallel readdir is enabled, mount point accesses the file that is currently being migrated. Since rebalance process doesn't have parallel-readdir feature, it expects "<volname>-client-0" where as mount expects "<volname>-readdir-head-0". Thus at some point either the mount or rebalance will fail. Solution: Enable parallel-readdir for rebalance as well and then do not allow enabling/disabling parallel-readdir if rebalance is in progress. Change-Id: I241ab966bdd850e667f7768840540546f5289483 BUG: 1436090 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: https://review.gluster.org/17056 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* eventsapi: Fix webhook-test when no schema specified in URLAravinda VK2017-04-171-1/+3
| | | | | | | | | | | | | | | | | If no schema specifed like `http` or `https` while testing webhook, it was failing with Schema Exception and not communicated the error to CLI caller. With this patch exception is handled and responded back to CLI caller. BUG: 1441945 Change-Id: I9be11d36e9f65be873516fef370c327f1cdbc93e Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: https://review.gluster.org/17054 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Prashanth Pai <ppai@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* geo-rep: Remove unlink fop during rmdirKotresh HR2017-04-171-10/+10
| | | | | | | | | | | | | | | | Even though it is known to be 'RMDIR', os.unlink was being tried and os.rmdir is issued upon receiving EISDIR. It's unnecessary unlink call for 'RMDIR'. Fixed the same. Change-Id: I8dbb680ee2c7f0c32b7799b1ed5351b3621cb42a BUG: 1441106 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: https://review.gluster.org/17041 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Aravinda VK <avishwan@redhat.com>
generated by cgit (git 2.34.1) at 2024-05-12 14:13:37 +0000