| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
'killall' is the only executable that is needed from the psmisc package
on glusterfs-server installations. NetBSD already uses 'pkill' as
alternative, this can be used everywhere.
BUG: 1197308
Change-Id: Ied671a74b735e321f52d99c869627b957aa2bd02
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Reviewed-on: https://review.gluster.org/16928
Smoke: Gluster Build System <jenkins@build.gluster.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Using a makebomb, on f23 at least, blows up when generating the
xdr headers and stubs. (Works reliably on f25 though, go figure.)
This change appears to mitigate the race on f23.
Change-Id: I006066f0e7c3f8b65189f97c70089f3422e3e08b
BUG: 1429696
Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com>
Reviewed-on: https://review.gluster.org/16941
Smoke: Gluster Build System <jenkins@build.gluster.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Niels de Vos <ndevos@redhat.com>
Tested-by: Anoop C S <anoopcs@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Problem:
While doing conservative merge, even if a brick is down, it will reset
the pending xattr on that. When that brick comes up, as part of the
heal, it will consider this brick as the source and removes the entries
on the other bricks, which leads to data loss.
Fix:
Undo pending only for the bricks which are up.
Change-Id: I18436fa0bb1faa5f60531b357dea3f6b20446303
BUG: 1433571
Signed-off-by: karthik-us <ksubrahm@redhat.com>
Reviewed-on: https://review.gluster.org/16913
Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
Smoke: Gluster Build System <jenkins@build.gluster.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Ravishankar N <ravishankar@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
...in gf_thread_create(). Technically, since we pass it as an argument
to pthread_sigmask, initialization is not needed but doing it as a good
practice.
Change-Id: Ie069af07cb07c1784f3841e1fc628ca13dfdcef4
BUG: 1434274
Signed-off-by: Ravishankar N <ravishankar@redhat.com>
Reviewed-on: https://review.gluster.org/16929
Smoke: Gluster Build System <jenkins@build.gluster.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Ashish Pandey <aspandey@redhat.com>
Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In client3_3_readdir(p)_cbk, in case of error conditions,
it is possible that the list_head is used before initializing.
Hence move the initialization before usage.
Change-Id: Ie58902d079fdc58416d17b5fa5f61375decb1c99
BUG: 1435943
Signed-off-by: Poornima G <pgurusid@redhat.com>
Reviewed-on: https://review.gluster.org/16948
Smoke: Gluster Build System <jenkins@build.gluster.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The "woken" flag wasn't being reset when it should have been, leading
(eventually) to a SEGV when someone tried to folow a synclock's waitq
to a task structure that had been freed while still on the queue. See
the bug report for (far) more detail.
Change-Id: I5cd9ae1bcb831555274108b292181ec2a29b6d95
BUG: 1434062
Signed-off-by: Jeff Darcy <jeff@pl.atyp.us>
Reviewed-on: https://review.gluster.org/16926
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Smoke: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Amar Tumballi <amarts@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
It is documented that GF_REF_PUT() returns a 0 in case the call resulted
in free'ing the structure. However the implementations did not have a
return value, so nothing can actually use it.
Change-Id: Ic57091f5ddd7e0b80929dc335a5b6d37f5fe1b2e
BUG: 1433405
Signed-off-by: Niels de Vos <ndevos@redhat.com>
Reviewed-on: https://review.gluster.org/16910
Smoke: Gluster Build System <jenkins@build.gluster.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Xavier Hernandez <xhernandez@datalab.es>
Reviewed-by: Jeff Darcy <jeff@pl.atyp.us>
Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Indiana Jones and the Temple of Ganesha HA, part two.
remove glsuterfs-ganesha subpackage, superceded by storhaug
Change-Id: I42a1fc59159add108d77080b9b130696216aa76d
BUG: 1418417
Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com>
Reviewed-on: https://review.gluster.org/16506
Smoke: Gluster Build System <jenkins@build.gluster.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: jiffin tony Thottan <jthottan@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
remove all vestiges of ganesha
The storhaug CLI is used to manage ganesha and Samba. Also any setup
and teardown of the ganesha HA is initiated using storhaug to preserve
the proper layering.
Change-Id: I0eec0016a1b7802a36e7b2d92896b86fdf8607d5
BUG: 1420713
Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com>
Reviewed-on: https://review.gluster.org/16504
Smoke: Gluster Build System <jenkins@build.gluster.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The previous change to remove the xdrgen script exposed (or
created) a recursive build dependency: libglusterfs needs the
generated headers, and libgfxdr should be linked with libglusterfs
for GF_FREE/__gf_free.
(Much grumbling about libglusterfs being the kitchen sink of gluster
elided. This would not be necessary if there were two or more libs,
a gluster "runtime" library with common gluster code shared by the
xlators and daemons, and a utility library with things like the
rbtree, memory allocation, and whatnot.)
So. Link at build time or link at runtime? For truth-and-beauty, link
with libglusterfs.so at build time. Without truth-and-beauty, don't
link with libglusterfs and rely on the other things that link with
libglusterfs to provide resolution of __gf_free().
Truth-and-beauty it is. But how to generate the headers first, then
build libglusterfs, then come back and build libgfxdr? Autotools is a
maze of twisty passages, all different. Things that work with gnu
make on linux don't work with the BSD make. Finally I hit on this
solution. Add a shadow directory where make only generates the headers,
then build libglusterfs using the generated headers, and finally build
libgfxdr and link with libglusterfs.
See original BZ 1330604
change http://review.gluster.org/14085
Change-Id: Iede8a30e3103176cb8f0b054885f30fcb352492b
BUG: 1429696
Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com>
Reviewed-on: https://review.gluster.org/16873
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Smoke: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Niels de Vos <ndevos@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We are only passing one argument (a pointer to struct synctask) to the
function, so argc must be 1 and not 2.
Change-Id: I4eaadd58a76f32327d8bb3efa9c5c435700d7391
BUG: 1434274
Signed-off-by: Ravishankar N <ravishankar@redhat.com>
Reviewed-on: https://review.gluster.org/16930
Smoke: Gluster Build System <jenkins@build.gluster.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Jeff Darcy <jeff@pl.atyp.us>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
During meatadata heal, we were not updating the version
though all the inode attributes were in sync.
Updated the code to adjust version when all the inode
attributes are in sync.
BUG: 1425703
Change-Id: I6723be3c5f748b286d4efdaf3c71e9d2087c7235
Signed-off-by: Sunil Kumar Acharya <sheggodu@redhat.com>
Reviewed-on: https://review.gluster.org/16772
Smoke: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Xavier Hernandez <xhernandez@datalab.es>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Commit 086436a introduced generation number (cleanup_gen) to ensure that
rpc layer doesn't end up cleaning up the connection object if
application layer has already destroyed it. Bumping up cleanup_gen was
done only in rpc_clnt_connection_cleanup (). However the same is needed
in rpc_clnt_reconnect_cleanup () too as with out it if the object gets destroyed
through the reconnect event in the application layer, rpc layer will
still end up in trying to delete the object resulting into double free
and crash.
Peer probing an invalid host/IP was the basic test to catch this issue.
Change-Id: Id5332f3239cb324cead34eb51cf73d426733bd46
BUG: 1433578
Signed-off-by: Atin Mukherjee <amukherj@redhat.com>
Reviewed-on: https://review.gluster.org/16914
Smoke: Gluster Build System <jenkins@build.gluster.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
Reviewed-by: Milind Changire <mchangir@redhat.com>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Jeff Darcy <jeff@pl.atyp.us>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Having this information printed the way FUSE/nfs do would helps immensely with
debugging experience, especially when a user/customer has added and removed
bricks a couple of times. It helps in mapping the brick path to its
corresponding protocol/client translator and in turn all the log messages that
may be thrown by this protocol/client xlator.
Change-Id: I0784e5fe932326fdbdc56f5a12b6951c7541a8cf
Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com>
Reviewed-on: https://review.gluster.org/16919
Smoke: Gluster Build System <jenkins@build.gluster.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
Reviewed-by: soumya k <skoduri@redhat.com>
Reviewed-by: Jeff Darcy <jeff@pl.atyp.us>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
I am seeing a lot of messages in qe/customer logs where read_txn
complains that file is possibly in split-brain because of no readable
subvol being found, does inode refresh and then there is no split-brain
message post the inode refresh. This means that a lookup was not issued
on the indoe to populate 'readable' or it can mean one brick is source
for data and the other for metadata, making readable to be zero (because
readable=intersection of (data,metadata readable) since commit
7a1c1e290470149696.
Since we anyway log actual split-brains post inode-refresh, move this
message to DEBUG log level.
Change-Id: Idb88b8ea362515279dc9b246f06b6b646c6d8013
BUG: 1433838
Signed-off-by: Ravishankar N <ravishankar@redhat.com>
Reviewed-on: https://review.gluster.org/16879
Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
Smoke: Gluster Build System <jenkins@build.gluster.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In order to improve debuggability, it is important
to have access to geo-rep master and slave mounts.
With the default behaviour, geo-rep lazy unmounts
the mounts after changing the current working
directory into the mount point. It also cleans
up the mount points. So only geo-rep worker has
the access and it becomes impossible to take the
client profile info and do any other client statck
analysis. Hence the following new config is being
introduced to allow access to mounts.
gluster vol geo-rep <mastervol> <slavehost>::<slavevol> \
config access_mount true
The default value of 'access_mount' is false.
Change-Id: I53dce4ea86a6ffc979c82f9330e8954327180ca3
BUG: 1433506
Signed-off-by: Kotresh HR <khiremat@redhat.com>
Reviewed-on: https://review.gluster.org/16912
Smoke: Gluster Build System <jenkins@build.gluster.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
PROBLEM: during a low watermark reset, checking of whether
the low watermark is lower than hi watermark is not done.
FIX: This patch checks if the hi watermark value is higher
the default low watermark. Else throws an failure of the reset
command
Change-Id: I8b49090c6bccce6d45c2e8076ab766047a2a6162
BUG: 1328342
Signed-off-by: hari gowtham <hgowtham@redhat.com>
Reviewed-on: https://review.gluster.org/14028
Smoke: Gluster Build System <jenkins@build.gluster.org>
Tested-by: hari gowtham <hari.gowtham005@gmail.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I6611c5699303c879e6f5d88549f5101dd6f63e46
BUG: 1384989
Signed-off-by: Muthu-vigneshwaran <mvignesh@redhat.com>
Reviewed-on: https://review.gluster.org/15644
Tested-by: Muthu Vigneshwaran <muthuvigneshwaran77@gmail.com>
Smoke: Gluster Build System <jenkins@build.gluster.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Manikandan Selvaganesh <manikandancs333@gmail.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
GLUSTERFS_LIBEXECDIR is effectively hard-coded to /usr/libexec/glusterfs
in configure(.ac)
Debian-based distributions don't have a /usr/libexec/ directory
This issues is partially mitigated by the use of $libexecdir in
some of the Makefile.am files, but even so the incorrectly defined
GLUSTERFS_LIBEXECDIR results in various things such as gsyncd,
glusterfind, eventsd, etc., trying to invoke other scripts and
programs from a location that doesn't exist.
And once we correctly define GLUSTERFS_LIBEXECDIR, then we might as
well use it appropriatedly.
Change-Id: If5219cadc51ae316f7ba2e2831d739235c77902d
BUG: 1430841
Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com>
Reviewed-on: https://review.gluster.org/16880
Smoke: Gluster Build System <jenkins@build.gluster.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Reviewed-by: Joe Julian <me@joejulian.name>
Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: Ie5d635951c483d858dc4be2a90fb24b8b5f4f02d
BUG: 1421938
Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com>
Reviewed-on: https://review.gluster.org/16869
Smoke: Gluster Build System <jenkins@build.gluster.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Replace complex and slow port selection code with bind(0) which
already respects privileged ports.
Change-Id: I408a8528e58e1aafcd32eba6a8f1a759e0bf274e
BUG: 1405628
Reviewed-on-release-3.8-fb: http://review.gluster.org/16150
Signed-off-by: Jeff Darcy <jdarcy@redhat.com>
Reviewed-on: https://review.gluster.org/16178
Smoke: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Niels de Vos <ndevos@redhat.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I3bc14998ed6a8841f77a004c24a456331048a521
BUG: 1428510
Signed-off-by: Xavier Hernandez <xhernandez@datalab.es>
Reviewed-on: https://review.gluster.org/16838
Smoke: Gluster Build System <jenkins@build.gluster.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Amar Tumballi <amarts@gmail.com>
Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
write-behind xlator does not honor the client pid being
set. It doesn't pass down the client pid saved in
'frame->root->pid'. This patch fixes the same.
Change-Id: I838dcf43f56d6d0aa1d2c88811a2b271d9e88d05
BUG: 1430608
Signed-off-by: Kotresh HR <khiremat@redhat.com>
Reviewed-on: https://review.gluster.org/16854
Smoke: Gluster Build System <jenkins@build.gluster.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
function "rebalance_task_completion" did not honor returned values other
than -1 and 1. This led to ignoring errno e.g in the current bug,
ENOTSUP returned by __is_file_migratable and it returned
EINVAL(op_errno initialized) to it's caller leading to failure messages
logged in ERROR level.
Change-Id: I45549fba35c72b278539269b750768fd89e0faf2
BUG: 1393338
Signed-off-by: Susant Palai <spalai@redhat.com>
Reviewed-on: https://review.gluster.org/15810
Smoke: Gluster Build System <jenkins@build.gluster.org>
Tested-by: Raghavendra G <rgowdapp@redhat.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
It's possible (though unlikely) that we could get a brick-attach
request while we're not ready to process it (ctx->active not set yet).
Add code to guard against this possibility, and return appropriate
error indicators.
Change-Id: Icb3bc52ce749258a3f03cbbbdf4c2320c5c541a0
BUG: 1430860
Signed-off-by: Jeff Darcy <jdarcy@redhat.com>
Reviewed-on: https://review.gluster.org/16883
Smoke: Gluster Build System <jenkins@build.gluster.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This was causing USS tests to fail. The underlying problem here is
that if we try to queue the attach request too soon after starting a
brick process then the socket code will get an error trying to write
to the still-unconnected socket. Its response is to shut down the
socket, which causes the queued attach requests to be force-unwound.
There's nothing to retry them, so they effectively never happen and
those bricks (second and succeeding for a snapshot) never become
available.
We *do* have a retry loop for attach requests, but currently break out
as soon as a request is queued - not actually sent. The fix is to
modify that loop so it will wait some more if the rpc connection isn't
even complete yet. Now we break out only when we have a completed
connection *and* a queued request.
Change-Id: Ib6be13646f1fa9072b4a944ab5f13e1b29084841
BUG: 1430148
Signed-off-by: Jeff Darcy <jdarcy@redhat.com>
Reviewed-on: https://review.gluster.org/16868
Smoke: Gluster Build System <jenkins@build.gluster.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Prashanth Pai <ppai@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I32be91e9db361a45454d6340a4c4ac2d0d7efffc
BUG: 1430042
Signed-off-by: Jeff Darcy <jdarcy@redhat.com>
Reviewed-on: https://review.gluster.org/16866
Smoke: Gluster Build System <jenkins@build.gluster.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Prashanth Pai <ppai@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Problem:
STACK_WINDs in a gluster backtrace dumped in a log file are
undecipherable with only the hex addresses of the location
leaving us without a clue.
Solution:
This utility uses the undeciphered lines in the backtrace and the
associated debuginfo rpm to generate the function name and the file and
line number associated with the stack frame.
Passing "none" as the debuginfo rpm name will make the script assume
that you want to resolve against a source install and not a debuginfo
rpm.
You would need to copy the unresolved lines from the backtrace into a
file and pass the name of this file to the utility as the input file.
Change-Id: I4d8bc1ae205af37688d03298de49654018bdba9d
BUG: 1426891
Signed-off-by: Milind Changire <mchangir@redhat.com>
Reviewed-on: https://review.gluster.org/16763
Smoke: Gluster Build System <jenkins@build.gluster.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since GF_CHECK_ALLOC may jump to out, with a mutex locked,
we need to make sure the mutex is unlocked before returning.
Error found by coverity
Change-Id: I81011e18afc90c2c0fd489ceeb78d90ae31e35ba
BUG: 789278
Signed-off-by: Michael Scherer <misc@redhat.com>
Reviewed-on: https://review.gluster.org/16793
Smoke: Gluster Build System <jenkins@build.gluster.org>
Tested-by: Michael Scherer <misc@fedoraproject.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We wanted to mark dirty for metadata/entry operations
whenever query-info is set and info is not yet there because we
are anyway sending xattrop over the network. But this is causing
25% regression from 3.8.8 so removing this optimization
Also fixed two small issues that we didn't find in the previous
patch
1) reconfigure failure was sending return value 0 for optimistic-changelog
2) ec->optimistic_changelog was set to true even before OPTION_INIT
BUG: 1408809
Change-Id: Iabb0b64bd4d3623688790e4b67e5c20b4da977a1
Signed-off-by: Pranith Kumar K <pkarampu@redhat.com>
Reviewed-on: https://review.gluster.org/16865
Reviewed-by: Xavier Hernandez <xhernandez@datalab.es>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Smoke: Gluster Build System <jenkins@build.gluster.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Programs that set mtime, such as `rsync -a`, don't work correctly on
GlusterFS, because it sets the nanoseconds to 000. This creates
problems for incremental backups, where files get accidentally copied
again and again.
For example, consider `myfile` on an ext4 system, being copied to a
GlusterFS volume, with `rsync -a` and then `cp -u` in turn. You'd
expect that after the first `rsync -a`, `cp -u` agrees that the file
need not be copied.
BUG: 1422074
Change-Id: I89c7b6a73e2e06c02851ff76b7e5cdfaa271e985
Signed-off-by: Niklas Hambüchen <mail@nh2.me>
Reviewed-on: https://review.gluster.org/16667
Smoke: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Niels de Vos <ndevos@redhat.com>
Tested-by: Jeff Darcy <jdarcy@redhat.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
Reviewed-by: jiffin tony Thottan <jthottan@redhat.com>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Avoid logging Success in the event of failure especially when errno has
no meaningful value w.r.t. the failure. In this case the errno is set to
zero when there's indeed a failure at the RPC level.
Change-Id: If2cc81aa1e590023ed22892dacbef7cac213e591
BUG: 1426032
Signed-off-by: Milind Changire <mchangir@redhat.com>
Reviewed-on: https://review.gluster.org/16730
Smoke: Gluster Build System <jenkins@build.gluster.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: N Balachandran <nbalacha@redhat.com>
Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Summary:
- Bigger buffer size made rebalance faster and broke the test.
- We made the file bigger so rebalance takes longer.
BUG: 1428058
Change-Id: I7acfec5611b28bdae0a9d9fc03eb104659a5563a
Signed-off-by: Shreyas Siravara <sshreyas@fb.com>
Author: Shreyas Siravara <sshreyas@fb.com>
Reviewed-on: https://review.gluster.org/16802
Tested-by: Vijay Bellur <vbellur@redhat.com>
Smoke: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
While setting volume option(disperse-shd-max-threads) for
replicate volume and volume option(cluster-shd-max-threads)
for disperse volume, glusterd is not validating volume options
and setting all the values irrespective of proper validation
for disperse-shd-max-threads and cluster-shd-max-threads
Change-Id: Ic88815ad49e901e74ffc042170f5caabf7c17a89
BUG: 1417588
Signed-off-by: Gaurav Yadav <gyadav@redhat.com>
Reviewed-on: https://review.gluster.org/16489
Smoke: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Problem: add-brick command to increase replica count in an arbiter
volume succeeds, causing undesirable effects like the 4th brick being
loaded with the arbiter xlator, the 3rd one losing the arbiter xlator
(when the brick process is restarted), arbitration logic in afr going
for a toss etc.
Fix: Arbiter configuration should always be a replica 3 volume (of
which 3rd brick is arbiter). Hence disallow increasing replica count for
arbiter volume configurations.
Change-Id: I9fe4edac880d0f711e6d44324ad5562974e53e51
BUG: 1429200
Signed-off-by: Ravishankar N <ravishankar@redhat.com>
Reviewed-on: https://review.gluster.org/16845
Smoke: Gluster Build System <jenkins@build.gluster.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
AFR restores atime/mtime only as a part of data heal. For non-regular
files (dirs, symlinks, char/block/socket files etc) which do not undergo
data-heal, atime/mtime is not restored.
This patch restores atime/mtime as a part of metadata heal for such
files.
Change-Id: Id8da885fc93fdf65c2f4bae2af3605b146ac1f16
BUG: 1429198
Signed-off-by: Ravishankar N <ravishankar@redhat.com>
Reviewed-on: https://review.gluster.org/16844
Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
Smoke: Gluster Build System <jenkins@build.gluster.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Problem: Fix to https://bugzilla.redhat.com/show_bug.cgi?id=1316873 has made
changes to set dirty flag before every update fop, data or metadata, and unset
it after successful operation. That makes some of the fops very slow such as
entry operations or metadata operations.
Solution: File data operations are the only operation which take some time and
setting dirty flag before a fop and unsetting it after serves the purpose as
probability of failure of a fop is high when the time duration is more. For all
the other operations, set dirty flag at the end of the fop, if any brick is
down and need heal.
Providing following option to choose between high performance or better heal
marking for metadata and entry fops.
Set/Unset dirty flag for every update fop at the start of the fop. If ON, this
option impacts performance of entry operations or metadata operations as it
will set dirty flag at the start and unset it at the end of ALL update fop. If
OFF and all the bricks are good, dirty flag will be set at the start only for
file fops For metadata and entry fops dirty flag will not be set at the start,
if all the bricks are good. This does not impact performance for metadata
operations and entry operation but has a very small window to miss marking
entry as dirty in case it is required to be healed.
Thanks to Xavi and Ashish for the design
Picked the .t file from Ashish' patch https://review.gluster.org/16298
BUG: 1408809
Change-Id: I3ce860063f0e2901e50754dcfc3e4ed22daf819f
Signed-off-by: Pranith Kumar K <pkarampu@redhat.com>
Reviewed-on: https://review.gluster.org/16821
Smoke: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Xavier Hernandez <xhernandez@datalab.es>
Tested-by: Xavier Hernandez <xhernandez@datalab.es>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since rsp.path is assigned a constant string, free would
operate on a incorrect pointer, with likely bad results.
Found by coverity scan
Change-Id: I4befdd78573daa3c0c3013100f7ae69a2dcae36a
BUG: 789278
Signed-off-by: Michael Scherer <misc@redhat.com>
Reviewed-on: https://review.gluster.org/16716
Smoke: Gluster Build System <jenkins@build.gluster.org>
Tested-by: N Balachandran <nbalacha@redhat.com>
Reviewed-by: N Balachandran <nbalacha@redhat.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I7a5167de77fabf19c5151775b553913a1af5a765
BUG: 1421938
Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com>
Reviewed-on: https://review.gluster.org/16785
Smoke: Gluster Build System <jenkins@build.gluster.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com>
Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
A new document explaining how ec encoding/decoding is implemented
has been added to the developer guide.
Change-Id: I344493477bf42b935ed75f7cf0574d54dc1b9509
Signed-off-by: Xavier Hernandez <xhernandez@datalab.es>
Reviewed-on: https://review.gluster.org/15637
Smoke: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Ashish Pandey <aspandey@redhat.com>
Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
My patch at https://review.gluster.org/16419 is resulting
in core dumps everytime I run tests/features/nuke.t.
Turns out dht, upon successfully "nuking" a directory,
which was initiated through a setxattr, unwinds the operation
with rmdir fop signature, resulting in readdir-ahead casting
a struct iatt (preparent) to dict_t, leading to a crash.
Change-Id: If5f50417be9eb93e731b06c79b9bf027e5dd4d55
Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com>
Reviewed-on: https://review.gluster.org/16829
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Smoke: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We currently see an increased activity by users filing github issues.
As we do not use github issues to track or respond to queries, adding
this template to help redirect users to the right forum.
Change-Id: Ied69af1c42b85e10018bbd83d48f7e6fa3c1f10b
Signed-off-by: Shyam <srangana@redhat.com>
Reviewed-on: https://review.gluster.org/16795
Smoke: Gluster Build System <jenkins@build.gluster.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Summary:
- The maximum block size, `DHT_REBALANCE_BLKSIZE`, is set to 128 KB.
- As a result, migrating files in the megabytes to gigabytes can take much longer than necessary.
- Some preliminary results by bumping the blocksize:
With 128 KB:
[2016-08-04 11:40:19.251167] I [MSGID: 109028] [dht-rebalance.c:2196:gf_defrag_status_get] 0-glusterfs: Rebalance is completed. Time taken is 15.00 secs
[2016-08-04 11:40:19.251189] I [MSGID: 109028] [dht-rebalance.c:2200:gf_defrag_status_get] 0-glusterfs: Files migrated: 49, size: 2569011200, lookups: 149, failures: 0, skipped: 0
With 1 MB:
[2016-08-04 11:41:21.093662] I [MSGID: 109028] [dht-rebalance.c:2196:gf_defrag_status_get] 0-glusterfs: Rebalance is completed. Time taken is 7.00 secs
[2016-08-04 11:41:21.093687] I [MSGID: 109028] [dht-rebalance.c:2200:gf_defrag_status_get] 0-glusterfs: Files migrated: 49, size: 2569011200, lookups: 149, failures: 0, skipped: 0
- This is a cherry-pick of D3670927 to 3.8.
Test Plan: Tested rebalance on devserver.
Reviewed By: dph, rwareing
Change-Id: Ide2edbf87ef9ae2b32a03f189c57b63e2f233fc8
BUG: 1428055
Signed-off-by: Shreyas Siravara <sshreyas@fb.com>
Reviewed-on: https://review.gluster.org/16797
Tested-by: Vijay Bellur <vbellur@redhat.com>
Smoke: Gluster Build System <jenkins@build.gluster.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Summary: Fixes a crash bug during unlink in server-rpc-fops.c
Signed-off-by: Shreyas Siravara <sshreyas@fb.com>
Change-Id: I049a9863ffd4003742276e0aa9e8d1224488182d
BUG: 1428093
Tested-by: Shreyas Siravara <sshreyas@fb.com>
Reviewed-on: https://review.gluster.org/16814
Tested-by: Vijay Bellur <vbellur@redhat.com>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Smoke: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Showed up in 0symbol-check.t while testing something else. Might as
well fix it now.
Change-Id: Ic6b8214de6f486187afc4987c5ffbbca02c8997f
Signed-off-by: Jeff Darcy <jdarcy@redhat.com>
Reviewed-on: https://review.gluster.org/16820
Smoke: Gluster Build System <jenkins@build.gluster.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
Reviewed-by: Prashanth Pai <ppai@redhat.com>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Trigger a cppcheck error
Change-Id: I8919fed47ef562319ac6baff38ed993e7cd54708
BUG: 789278
Signed-off-by: Michael Scherer <misc@redhat.com>
Reviewed-on: https://review.gluster.org/16741
Smoke: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
Tested-by: Michael Scherer <misc@fedoraproject.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Change-Id: I07c3a21c1c0625a517964693351356eead962571
BUG: 1427404
Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com>
Reviewed-on: https://review.gluster.org/16792
Smoke: Gluster Build System <jenkins@build.gluster.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Omitting this return causes a confusing error message in the next block,
which is also a case of use after free. This bug was found by Coverity
scan.
BUG: 789278
Change-Id: Ifd4932de437e8ae875ff191033ea43cff81b701d
Signed-off-by: Nigel Babu <nigelb@redhat.com>
Reviewed-on: https://review.gluster.org/16790
Smoke: Gluster Build System <jenkins@build.gluster.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This test was commented out with the belief that it depended
on utimensat() support, but in fact it was not necessary because
`stat -c %Y` only outputs second resolution.
Simply commenting in the test made it fail because it checked
the values *before* the heal, while intended was to check them
*after* the heal. This commit fixes that.
Change-Id: I4194ac645b365a1f906a3ac9bcbbdb1f05000e27
BUG: 1422074
Signed-off-by: Niklas Hambüchen <mail@nh2.me>
Reviewed-on: https://review.gluster.org/16789
Reviewed-by: Ravishankar N <ravishankar@redhat.com>
Tested-by: Ravishankar N <ravishankar@redhat.com>
Smoke: Gluster Build System <jenkins@build.gluster.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Niklas Hambüchen
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Log more about the different paths leading to socket disconnect for ease
of debugging.
Log via gf_log_callingfn() in __socket_disconnect() at loglevel TRACE if
socket connection is being torn down.
Change-Id: I1e551c2d685784b5ec747f481179f64d524c0461
BUG: 1426125
Signed-off-by: Milind Changire <mchangir@redhat.com>
Reviewed-on: https://review.gluster.org/16732
Smoke: Gluster Build System <jenkins@build.gluster.org>
NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
|