geo-rep: Fixing issue with xsync upper limit

While identifying the file/dir to sync, xtime of the file was compared
with xsync_upper_limit as `xtime < xsync_upper_limit` After the sync,
xtime of parent directory is updated as stime. With the upper limit
condition, stime is updated as MIN(xtime_parent, xsync_upper_limit)

With this files will get missed if `xtime_of_file == xsync_upper_limit`

With this patch xtime_of_file is compared as
xtime_of_file <= xsync_upper_limit

BUG: 1128093
Change-Id: I5022ce67ba503ed4621531a649a16fc06b2229d9
Signed-off-by: Aravinda VK <avishwan@redhat.com>
Reviewed-on: http://review.gluster.org/8439
Tested-by: Gluster Build System <jenkins@build.gluster.com>
Reviewed-by: Kotresh HR <khiremat@redhat.com>
Reviewed-by: Vijay Bellur <vbellur@redhat.com>

1 files changed, 34 insertions, 39 deletions

diff --git a/geo-replication/syncdaemon/master.py b/geo-replication/syncdaemon/master.py
index e3904736ba2..79c90630dca 100644
--- a/geo-replication/syncdaemon/master.py
+++ b/geo-replication/syncdaemon/master.py
@@ -168,10 +168,10 @@ class NormalMixin(object):
             raise GsyncdError("timestamp corruption for " + path)
 
     def need_sync(self, e, xte, xtrd):
-        if self.xsync_upper_limit is None:
-            return xte > xtrd
+        if self.xsync_upper_limit:
+            return xte > xtrd and xte <= self.xsync_upper_limit
         else:
-            return xte > xtrd and xte < self.xsync_upper_limit
+            return xte > xtrd
 
     def set_slave_xtime(self, path, mark):
         self.slave.server.set_stime(path, self.uuid, mark)
@@ -442,13 +442,24 @@ class GMasterCommon(object):
     def register(self):
         self.register()
 
-    def crawlwrap(self, oneshot=False, no_stime_update=False):
+    def crawlwrap(self, oneshot=False, no_stime_update=False,
+                  register_time=None):
         if oneshot:
             # it's important to do this during the oneshot crawl as
             # for a passive gsyncd (ie. in a replicate scenario)
             # the keepalive thread would keep the connection alive.
             self.init_keep_alive()
 
+        # If crawlwrap is called when partial history available,
+        # then it sets register_time which is the time when geo-rep
+        # worker registerd to changelog consumption. Since nsec is
+        # not considered in register time, their are chances of skipping
+        # changes detection in xsync crawl. Add 1 sec to upper_limit.
+        # This limit will be reset when crawlwrap is called again.
+        self.xsync_upper_limit = None
+        if register_time:
+            self.xsync_upper_limit = (register_time + 1, 0)
+
         # no need to maintain volinfo state machine.
         # in a cascading setup, each geo-replication session is
         # independent (ie. 'volume-mark' and 'xtime' are not
@@ -757,6 +768,12 @@ class GMasterChangelogMixin(GMasterCommon):
         logging.debug('changelog working dir %s' % workdir)
         return workdir
 
+    def get_purge_time(self):
+        purge_time = self.xtime('.', self.slave)
+        if isinstance(purge_time, int):
+            purge_time = None
+        return purge_time
+
     def process_change(self, change, done, retry):
         pfx = gauxpfx()
         clist = []
@@ -1135,9 +1152,7 @@ class GMasterChangelogMixin(GMasterCommon):
         changes = []
         # get stime (from the brick) and purge changelogs
         # that are _historical_ to that time.
-        purge_time = self.xtime('.', self.slave)
-        if isinstance(purge_time, int):
-            purge_time = None
+        purge_time = self.get_purge_time()
 
         self.changelog_agent.scan()
         self.crawls += 1
@@ -1175,14 +1190,10 @@ class GMasterChangeloghistoryMixin(GMasterChangelogMixin):
     def crawl(self, no_stime_update=False):
         self.history_turns += 1
         self.update_worker_crawl_status("History Crawl")
-        logging.info('starting history crawl... turns: %s' %
-                     self.history_turns)
+        purge_time = self.get_purge_time()
 
-        # get stime (from the brick) and purge changelogs
-        # that are _historical_ to that time.
-        purge_time = self.xtime('.', self.slave)
-        if isinstance(purge_time, int):
-            purge_time = None
+        logging.info('starting history crawl... turns: %s, stime: %s'
+                     % (self.history_turns, repr(purge_time)))
 
         if not purge_time or purge_time == URXTIME:
             logging.info("stime not available, abandoning history crawl")
@@ -1226,8 +1237,8 @@ class GMasterChangeloghistoryMixin(GMasterChangelogMixin):
 
         history_turn_time = int(time.time()) - self.history_crawl_start_time
 
-        logging.info('finished history crawl syncing between %s - %s.' %
-                     (purge_time[0], actual_end))
+        logging.info('finished history crawl syncing, endtime: %s, stime: %s'
+                     % (actual_end, repr(self.get_purge_time())))
 
         # If TS returned from history_changelog is < register_time
         # then FS crawl may be required, since history is only available
@@ -1260,7 +1271,7 @@ class GMasterXsyncMixin(GMasterChangelogMixin):
 
     XSYNC_MAX_ENTRIES = 1 << 13
 
-    def register(self, register_time, changelog_agent=None):
+    def register(self, register_time=None, changelog_agent=None):
         self.counter = 0
         self.comlist = []
         self.stimes = []
@@ -1277,17 +1288,6 @@ class GMasterXsyncMixin(GMasterChangelogMixin):
             else:
                 raise
 
-        # After changelogs history processing completes, it switches
-        # to xsync/hibrid crawl if history actual end time is less than
-        # live changelog register time. Xsync should only run for that
-        # small gap, ie.. changelog_register_time - history_actual_end_time
-        # If we don't have upper limit to limit the XSync change detection
-        # It will keep on detecting the files even though changelogs are
-        # available for the same. Set upper limit during register
-        # and reset at the end of each crawl. Reseting at the end of
-        # crawl is required if change_detector is set to xsync.
-        self.xsync_upper_limit = (register_time, 0)
-
     def crawl(self, no_stime_update=False):
         """
         event dispatcher thread
@@ -1299,18 +1299,15 @@ class GMasterXsyncMixin(GMasterChangelogMixin):
             self.Xcrawl()
         t = Thread(target=Xsyncer)
         t.start()
-        logging.info('starting hybrid crawl...')
+        logging.info('starting hybrid crawl..., stime: %s'
+                     % repr(self.get_purge_time()))
         self.update_worker_crawl_status("Hybrid Crawl")
         while True:
             try:
                 item = self.comlist.pop(0)
                 if item[0] == 'finale':
-                    if self.xsync_upper_limit is not None:
-                        logging.info('finished hybrid crawl syncing, endtime: '
-                                     '%s' % self.xsync_upper_limit[0])
-                    else:
-                        logging.info('finished hybrid crawl syncing')
-
+                    logging.info('finished hybrid crawl syncing, stime: %s'
+                                 % repr(self.get_purge_time()))
                     break
                 elif item[0] == 'xsync':
                     logging.info('processing xsync changelog %s' % (item[1]))
@@ -1333,8 +1330,6 @@ class GMasterXsyncMixin(GMasterChangelogMixin):
             except IndexError:
                 time.sleep(1)
 
-        self.xsync_upper_limit = None
-
     def write_entry_change(self, prefix, data=[]):
         self.fh.write("%s %s\n" % (prefix, ' '.join(data)))
 
@@ -1460,7 +1455,7 @@ class GMasterXsyncMixin(GMasterChangelogMixin):
                                               str(st.st_gid), str(st.st_mode)])
                 self.Xcrawl(e, xtr_root)
                 stime_to_update = xte
-                if self.xsync_upper_limit is not None:
+                if self.xsync_upper_limit:
                     stime_to_update = min(self.xsync_upper_limit, xte)
                 self.stimes.append((e, stime_to_update))
             elif stat.S_ISLNK(mo):
@@ -1487,7 +1482,7 @@ class GMasterXsyncMixin(GMasterChangelogMixin):
                 self.write_entry_change("D", [gfid])
         if path == '.':
             stime_to_update = xtl
-            if self.xsync_upper_limit is not None:
+            if self.xsync_upper_limit:
                 stime_to_update = min(self.xsync_upper_limit, xtl)
             self.stimes.append((path, stime_to_update))
             self.sync_done(self.stimes, True)