summaryrefslogtreecommitdiffstats
path: root/xlators/protocol
Commit message (Collapse)AuthorAgeFilesLines
* protocol/server: get the client object from frame->root even in barrierRaghavendra Bhat2014-01-152-3/+1
| | | | | | | * Remove the reference to client object from server_state_t structure Change-Id: Ic2dbf9dd487f1177bd889fe481e63bc063fd6183 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com>
* protocol/server: copy the response into the payload instead of using the pointerRaghavendra Bhat2014-01-132-3/+6
| | | | | | | | | | | | | | | | The response structure filled up in server_submit_reply is local to the function (i.e stack allocated) whose address is stored in the barrier payload to use later while sending the replies. But after the function is exited (server_submit_reply) the pointer is not valid and contains invalid data, which either leads in a segfault due to illegal memory access or reply not being sent as the total length of the reply obtained from that memory might not be valid. So instead of saving the pointer inside the payload, save the complete reply itself. Change-Id: I7d0b7b181584865199357a67165b99bf35def5ab Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com>
* protocol/server: Unbarrier in a thread.shishir gowda2013-11-182-4/+12
| | | | | | | | Currently if the queue length is large, the response to glusterd will get blocked Change-Id: I713e8803a087b5131a35050ca027165562d7e1b7 Signed-off-by: shishir gowda <sgowda@redhat.com>
* protocol/server: init the barrier queueshishir gowda2013-11-152-3/+7
| | | | | Change-Id: Ib39b244fd29d837a0640dba505eeff42e0a22f9a Signed-off-by: shishir gowda <sgowda@redhat.com>
* snapshot: Merge conflict resolutionshishir gowda2013-11-151-13/+18
| | | | Signed-off-by: shishir gowda <sgowda@redhat.com>
* protocol/server: avoid rpc reply to the client only if the fop is barrieredRaghavendra Bhat2013-11-151-4/+7
| | | | | | | | * Now, reply submission to the client is avoided even if the fop is not barriered Change-Id: I9d503935c4d851f5dd0e8e4be0fea9c92e636ff3 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com>
* protocol/server: Implement barriering mechanisms for fopsshishir gowda2013-11-154-5/+468
| | | | | | | | | | | | | Barriering allows cbk's responses to be held back until either a timeout or a un-barrier event is received. The event is triggered by a brick-op. barrier-timeout, barrier-queue-lenght, and barrier-fops are currently exposed as a xlator-options only Change-Id: Ifb62d5b2bd2fbb35aca3b537e534156c877ce3a6 Signed-off-by: shishir gowda <sgowda@redhat.com>
* gNFS: RFE for NFS connection behaviorSantosh Kumar Pradhan2013-11-141-6/+1
| | | | | | | | | | | | | | | Implement reconfigure() for NFS xlator so that volume set/reset wont restart the NFS server process. But few options can not be reconfigured dynamically e.g. nfs.mem-factor, nfs.port etc which needs NFS to be restarted. Change-Id: Ic586fd55b7933c0a3175708d8c41ed0475d74a1c BUG: 1027409 Signed-off-by: Santosh Kumar Pradhan <spradhan@redhat.com> Reviewed-on: http://review.gluster.org/6236 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* server/rpc: bricks goes offline and comes back online, with lots of "No such ↵Vikhyat Umrao2013-11-121-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | file or directory" log messages Problem: Messages were getting logged very frequently at log level INFO. [2013-03-01 11:34:28.029222] I [server3_1-fops.c:1541:server_open_cbk] vol-server: 993888: OPEN (null) (--) ==> -1 (No such file or directory) [2013-03-01 11:34:28.031579] I [server3_1-fops.c:252:server_inodelk_cbk] vol-server: 993896: INODELK (null) (--) ==> -1 (No such file or directory) [2013-03-01 11:34:28.034041] I [server3_1-fops.c:252:server_inodelk_cbk] vol-server: 993914: INODELK (null) (--) ==> -1 (No such file or directory) [2013-03-01 11:34:28.040435] I [server3_1-fops.c:1338:server_flush_cbk] vol-server: 993938: FLUSH -2 (--) ==> -1 (No such file or directory) Solution: Moved them to DEBUG log level if error number equlas to ENOENT else to ERROR log level. It will help in decreasing the size of log files at INFO log level. For server_open_cbk and for some other functions we already have a patch, below is the URL for it. URL- http://review.gluster.org/6241 This patch solves logging problem for functions server_inodelk_cbk and server_flush_cbk. Change-Id: I57372e851371e466f1674726015e28378b826f5f BUG: 1029372 Signed-off-by: Vikhyat Umrao<vumrao@redhat.com> Reviewed-on: http://review.gluster.org/6252 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* server/rpc: Numerous entries of error - "No such file or directory" in ↵Vikhyat Umrao2013-11-111-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | bricks log Problem: Messages were getting logged very frequently at log level INFO. One of the log file snippet - [2013-10-27 00:05:01.501355] I [server3_1-fops.c:1707:server_stat_cbk] 0-vol-server: 24846575: STAT (null) (--) ==> -1 (No such file or directory) [2013-10-27 00:05:01.505101] I [server3_1-fops.c:1707:server_stat_cbk] 0-vol-server: 24846577: STAT (null) (--) ==> -1 (No such file or directory) [2013-10-27 00:05:01.507299] I [server3_1-fops.c:1707:server_stat_cbk] 0-vol-server: 24846578: STAT (null) (--) ==> -1 (No such file or directory) [2013-10-20 19:50:35.554563] I [server3_1-fops.c:1538:server_open_cbk] 0-vol-server: 18714687: OPEN <gfid:01c70ca0-1952-4e82-abee-a07205757d8e> (01c70ca0-1952-4e82-abee-a07205757d8e) ==> -1 (No such file or directory) [2013-10-20 19:50:35.555520] I [server3_1-fops.c:1538:server_open_cbk] 0-vol-server: 18714697: OPEN <gfid:01c70ca0-1952-4e82-abee-a07205757d8e> (01c70ca0-1952-4e82-abee-a07205757d8e) ==> -1 (No such file or directory) [2013-10-20 19:50:35.558292] I [server3_1-fops.c:1538:server_open_cbk] 0-vol-server: 18714712: OPEN (null) (--) ==> -1 (No such file or directory) Solution: Moved them to DEBUG log level if error number equlas to ENOENT else to ERROR log level. It will help in decreasing the size of log files at INFO log level. Change-Id: I23d74320c9c21bbce4805c20295556cc2cc0a8d8 BUG: 808073 Signed-off-by: Vikhyat Umrao <vumrao@redhat.com> Reviewed-on: http://review.gluster.org/6241 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterfs: zerofill supportM. Mohan Kumar2013-11-103-0/+262
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for a new ZEROFILL fop. Zerofill writes zeroes to a file in the specified range. This fop will be useful when a whole file needs to be initialized with zero (could be useful for zero filled VM disk image provisioning or during scrubbing of VM disk images). Client/application can issue this FOP for zeroing out. Gluster server will zero out required range of bytes ie server offloaded zeroing. In the absence of this fop, client/application has to repetitively issue write (zero) fop to the server, which is very inefficient method because of the overheads involved in RPC calls and acknowledgements. WRITESAME is a SCSI T10 command that takes a block of data as input and writes the same data to other blocks and this write is handled completely within the storage and hence is known as offload . Linux ,now has support for SCSI WRITESAME command which is exposed to the user in the form of BLKZEROOUT ioctl. BD Xlator can exploit BLKZEROOUT ioctl to implement this fop. Thus zeroing out operations can be completely offloaded to the storage device , making it highly efficient. The fop takes two arguments offset and size. It zeroes out 'size' number of bytes in an opened file starting from 'offset' position. This patch adds zerofill support to the following areas: - libglusterfs - io-stats - performance/md-cache,open-behind - quota - cluster/afr,dht,stripe - rpc/xdr - protocol/client,server - io-threads - marker - storage/posix - libgfapi Client applications can exloit this fop by using glfs_zerofill introduced in libgfapi.FUSE support to this fop has not been added as there is no system call for this fop. Changes from previous version 3: * Removed redundant memory failure log messages Changes from previous version 2: * Rebased and fixed build error Changes from previous version 1: * Rebased for latest master TODO : * Add zerofill support to trace xlator * Expose zerofill capability as part of gluster volume info Here is a performance comparison of server offloaded zeofill vs zeroing out using repeated writes. [root@llmvm02 remote]# time ./offloaded aakash-test log 20 real 3m34.155s user 0m0.018s sys 0m0.040s [root@llmvm02 remote]# time ./manually aakash-test log 20 real 4m23.043s user 0m2.197s sys 0m14.457s [root@llmvm02 remote]# time ./offloaded aakash-test log 25; real 4m28.363s user 0m0.021s sys 0m0.025s [root@llmvm02 remote]# time ./manually aakash-test log 25 real 5m34.278s user 0m2.957s sys 0m18.808s The argument log is a file which we want to set for logging purpose and the third argument is size in GB . As we can see there is a performance improvement of around 20% with this fop. Change-Id: I081159f5f7edde0ddb78169fb4c21c776ec91a18 BUG: 1028673 Signed-off-by: Aakash Lal Das <aakash@linux.vnet.ibm.com> Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Reviewed-on: http://review.gluster.org/5327 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* client_t: phase 2, refactor server_ctx and locks_ctx outKaleb S. KEITHLEY2013-10-318-721/+624
| | | | | | | | | | | | | | remove server_ctx and locks_ctx from client_ctx directly and store as into discrete entities in the scratch_ctx hooking up dump will be in phase 3 BUG: 849630 Change-Id: I94cea328326db236cdfdf306cb381e4d58f58d4c Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/5678 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* dual license: update remaining files with correct license textKaleb S. KEITHLEY2013-10-242-26/+8
| | | | | | | | | | | | | | | Sayan Saha has previously approved changing everthing to dual license but somehow we have missed changing these files. I am explicitly not updating the copyright dates as nothing else that's copyrightable has changed in these files with the license change Change-Id: Ia965eeb7168447d69e28e939ad95ee388873b6e4 BUG: 951549 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/6128 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* libglusterfs: Add monotonic clocking counter for timer threadHarshavardhana2013-10-155-18/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | gettimeofday() returns the current wall clock time and timezone. Using these functions in order to measure the passage of time (how long an operation took) therefore seems like a no-brainer. This time suffer's from some limitations: a. They have a low resolution: “High-performance” timing by definition, requires clock resolutions into the microseconds or better. b. They can jump forwards and backwards in time: Computer clocks all tick at slightly different rates, which causes the time to drift. Most systems have NTP enabled which periodically adjusts the system clock to keep them in sync with “actual” time. The adjustment can cause the clock to suddenly jump forward (artificially inflating your timing numbers) or jump backwards (causing your timing calculations to go negative or hugely positive). In such cases timer thread could go into an infinite loop. From 'man gettimeofday': ---------- .. .. The time returned by gettimeofday() is affected by discontinuous jumps in the system time (e.g., if the system administrator manually changes the system time). If you need a monotonically increasing clock, see clock_gettime(2). .. .. ---------- Rationale: For calculating interval timing for Timer thread, all that’s needed should be clock as a simple counter that increments at a stable rate. This is necessary to avoid the jumps which are caused by using "wall time", this counter must be monotonic that can never “tick” backwards, ever. Change-Id: I701d31e71a85a73d21a6c5cd15583e7a5a645eeb BUG: 1017993 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/6070 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* protocol/server: eliminate an unnecessary frame create and destroyKaleb S. KEITHLEY2013-10-021-25/+11
| | | | | | | | | | | | | | | | | | connection_cleanup creates a frame solely so that it can be copied. But the process of copying creates a new frame, and there's nothing apparently magic about the one being copied; we can eliminate an unnecessary create and destroy. Which in the grand scheme of things probably isn't the worst thing we do, but it's low hanging fruit. Change-Id: I4a23b84a53e086137b7d4167ad8c20b673d1ffe5 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/6019 Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* rpc/rpc-lib: rpcsvc should reply when rpc_err is setPranith Kumar K2013-09-111-176/+179
| | | | | | | | | | | | | | | | | | | | | Problem: When requests are received on a connection before setvolume is done, creating frame from the requests fail because there is no association of the transport with the conn(i.e. xl_private). xl_private is set only on set_volume. In such cases error response is not sent from server xlator to that request because of which operations on mount point are hanging. Fix: Set actor return value to RPCSVC_ACTOR_ERROR so that response is sent even in these cases. Change-Id: I74d7bc6849fde6c734008d67c1f4bc9d9f7a84f9 BUG: 1006367 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/5892 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* features/locks : Improves debuggability of inode/entry locks.Anuradha Talur2013-09-031-0/+32
| | | | | | | | | | | | | | | | | Prints, in the statedump, the information about the mount that performed the inode/entry lk. For the entrylks that are granted after a blocked state, the blocked time is not printed. A patch for that will be sent later. Change-Id: Ib0c1ed21fa9328b435f96b590dd343f59814a08d BUG: 915629 Signed-off-by: Anuradha Talur <atalur@redhat.com> Reviewed-on: http://review.gluster.org/5712 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* libglusterfs/client_t client_t implementation, phase 1Kaleb S. KEITHLEY2013-07-297-1311/+567
| | | | | | | | | | | | | | | | | | | | | | | | Implementation of client_t The feature page for client_t is at http://www.gluster.org/community/documentation/index.php/Planning34/client_t In addition to adding libglusterfs/client_t.[ch] it also extracts/moves the locktable functionality from xlators/protocol/server to libglusterfs, where it is used; thus it may now be shared by other xlators too. This patch is large as it is. Hooking up the state dump is left to do in phase 2 of this patch set. (N.B. this change/patch-set supercedes previous change 3689, which was corrupted during a rebase. That change will be abandoned.) BUG: 849630 Change-Id: I1433743190630a6d8119a72b81439c0c4c990340 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/3957 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com>
* core: increase the auxillary group limit to 65536Anand Avati2013-07-241-0/+3
| | | | | | | | | | | | | Make the allocation of groups dynamic and increase the limit to 65536. Change-Id: I702364ff460e3a982e44ccbcb3e337cac9c2df51 BUG: 953694 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/5111 Reviewed-by: Xavier Hernandez <xhernandez@datalab.es> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* protocol/server: Initialize connection variablePranith Kumar K2013-06-271-0/+2
| | | | | | | | | Change-Id: I46badd812e9b936911ddd2793cef7ce30ec220a6 BUG: 979237 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/5266 Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* rpc: duplicate request cache for nfsRajesh Amaravathi2013-06-213-52/+51
| | | | | | | | | | | | | | | Duplicate request cache provides a mechanism for detecting duplicate rpc requests from clients. DRC caches replies and on duplicate requests, sends the cached reply instead of re-processing the request. Change-Id: I3d62a6c4aa86c92bf61f1038ca62a1a46bf1c303 BUG: 847624 Signed-off-by: Rajesh Amaravathi <rajesh@redhat.com> Reviewed-on: http://review.gluster.org/4049 Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* protocol/server: print connection-id in fop failure logs.Raghavendra G2013-06-181-197/+275
| | | | | | | | | | | | | | | | Currently we have tuple (server-xlator-name, callid) for identifying a call. However it does not uniquely identify the operation when there are multiple clients (since operations from all clients go through same server). Adding connection-id resolves this ambiguity. Also printing connection-id helps diagnose failures associated with connection state (like fds, locks). Change-Id: I13563bd06ee9b72fc1a10d239f77db5183658573 BUG: 963540 Signed-off-by: Raghavendra G <raghavendra@gluster.com> Reviewed-on: http://review.gluster.org/5011 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* protocol/rpc: move latest added procedures to the end of the arrayNiels de Vos2013-06-172-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | While looking at the newly introduced procedures FALLOCATE and DISCARD, it seems that these were added with already existing procedure numbers. This makes the protocol incompatible with existing roll-outs. It is very confusing when new procedures are added somewhere in the middle of the array. This will cause the number of existing procedures to change. It is much preferred to add new procedures at the end of the array. This changes not only corrects the enum that generates the procedure numbers, but also the ordering in the client and server fops-array for clarity. Correcting this greatly simplifies adding support for these new procedures in Wireshark and will prevent confusion to the people reading network traces (with or without Wireshark). Change-Id: Ib9e7978531d016c7230d756b855cb94cb0793b0f BUG: 974976 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/5215 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* glusterfs: discard (hole punch) supportBrian Foster2013-06-133-0/+258
| | | | | | | | | | | | | | | | Add support for the DISCARD file operation. Discard punches a hole in a file in the provided range. Block de-allocation is implemented via fallocate() (as requested via fuse and passed on to the brick fs) but a separate fop is created within gluster to emphasize the fact that discard changes file data (the discarded region is replaced with zeroes) and must invalidate caches where appropriate. BUG: 963678 Change-Id: I34633a0bfff2187afeab4292a15f3cc9adf261af Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-on: http://review.gluster.org/5090 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* gluster: add fallocate fop supportBrian Foster2013-06-133-0/+256
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implement support for the fallocate file operation. fallocate allocates blocks for a particular inode such that future writes to the associated region of the file are guaranteed not to fail with ENOSPC. This patch adds fallocate support to the following areas: - libglusterfs - mount/fuse - io-stats - performance/md-cache,open-behind - quota - cluster/afr,dht,stripe - rpc/xdr - protocol/client,server - io-threads - marker - storage/posix - libgfapi BUG: 949242 Change-Id: Ice8e61351f9d6115c5df68768bc844abbf0ce8bd Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-on: http://review.gluster.org/4969 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* protocol/server: Change logs to give more info on disconnectsPranith Kumar K2013-05-313-36/+71
| | | | | | | | | Change-Id: I8304a12df417be164c564e0696f72c3334f21569 BUG: 952138 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/4824 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* protocol/client: Prevent excessive logging of client's "disconnect" messages.Venkatesh Somyajulu2013-05-283-3/+18
| | | | | | | | | | | | | | | | | | | | | Problem: Currently when gluster volume start force is executed, client process will talk to glusterd to get the port of the brick. But if brick's path is not available it cannot return brick's port. So client process will keep connecting and disconnecting from glusterd for port-query which is ultimately responsible for execssive logging of disconnect messages. Fix: Message will be logged just once at INFO level after the first disconnect from glusterd. Afterwards "disconnect" messages will be logged in DEBUG mode. Change-Id: I2b787f3820b5da45e090c562e5698fcfe24a02cd BUG: 959969 Signed-off-by: Venkatesh Somyajulu <vsomyaju@redhat.com> Reviewed-on: http://review.gluster.org/4953 Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* logging: Fix to avoid excessive logging.Venkatesh Somyajulu2013-05-281-2/+2
| | | | | | | | | | | | | | | | | | | | | mem_get function: Log message related to mem_pool calloc is removed as its been calculated in mempool 'stats'. This messgae is consuming nearly half of the total log messages in DEBUG mode. dht_hash_compute function: Changed log level from DEBUG to TRACE. client_fdctx_destroy function: Changed log level from DEBUG to TRACE. Change-Id: Ic948db0419e76df4e95ebd0cabaf66eadbaada6b BUG: 966851 Signed-off-by: Venkatesh Somyajulu <vsomyaju@redhat.com> Reviewed-on: http://review.gluster.org/5086 Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* client: Reset remote-port on first disconnect from brickKrishnan Parthasarathi2013-05-161-5/+9
| | | | | | | | | | Change-Id: I8940358788a7c4f8be81d705749f668a43422b8e BUG: 962930 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/4988 Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* license: xlators/protocol/server dual license GPLv2 and LGPLv3+Kaleb S. KEITHLEY2013-04-1210-145/+57
| | | | | | | | | BUG: 951549 Change-Id: I3de5bd86d4238a60a0a85ba2e15d9c131969b210 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/4816 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* protocol/client: Print valid loc identifiersPranith Kumar K2013-04-031-35/+27
| | | | | | | | | | Change-Id: I45f91105862a2484b8906a7a63b98ab4aaf80d05 BUG: 924643 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/4683 Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* rpc: bring in root-squashing behavior in rpcRaghavendra Bhat2013-02-171-0/+9
| | | | | | | | | | | | | | | | | | * requests coming in as root are converted to nfsnobody * with open-behind some acl checks wont happen and nfsnobody can read the file "whose owner is root and other users do not have permission to read the file". This is becasue open-behind does not send the open to the brick and sends success to the application, thus the acl related tests on the file wont happen which would have prevented the file from being opened. Change-Id: I73afbfd904f0beb3a2ebe807b938ac2fecd4976b BUG: 887145 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/4516 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* Use proper libtool option -avoid-version instead of bogus -avoidversionAnand Avati2013-02-074-4/+4
| | | | | | | | | | Change-Id: I1c9541058c7d07786539a3266ca125a6a15287d8 BUG: 859835 Signed-off-by: Anand Avati <avati@redhat.com> Original-author: Kacper Kowalik (Xarthisius) <xarthisius.kk@gmail.com> Signed-off-by: Kacper Kowalik (Xarthisius) <xarthisius.kk@gmail.com> Reviewed-on: http://review.gluster.org/3967 Tested-by: Gluster Build System <jenkins@build.gluster.com>
* protocol/client: Avoid double free of framePranith Kumar K2013-02-041-2/+1
| | | | | | | | | | | | | | | When client_submit_request fails it calls cbk. The cleanups should happen only in cbk. The code committed as part of http://review.gluster.org/4357 violates this. Also found that clnt_release_reopen_fd violates this as well. This patch fixes these issue. Change-Id: Ic02ba278724b03c65c00b686c39fd7846122618a BUG: 821056 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/4464 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* protocol/server: upon server_connection_put, set xl_private of the transport toRaghavendra Bhat2013-02-031-2/+10
| | | | | | | | | | | | | | | | | NULL Suppose the get_xlator_by_name returns NULL and the connection is put back then update the xl_private of the transport by setting to NULL. Otherwise server_connection_put would have freed the connection object and xl_private of the transport would still be pointing to the same location which is freed, thus leading to a segfault when the location is accessed. Change-Id: Id47e0edde3073b09765338c730847ba3095df9e2 BUG: 901457 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/4411 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* protocol/client: Periodically attempt reopensPranith Kumar K2013-02-035-93/+263
| | | | | | | | | | | | | | | | | | | | | | If the brick is taken down and the hard disk is replaced and the brick is brought back up, the re-opens of the open-fds will fail because the file is not present on the brick. Re-opens are not attempted even if the files are re-created by self-heal until the brick is brought down after the files are re-created and brought back up. This is a problem with a VM-store in a replica-setup. Until the fd is re-opened the writes will never happen on the brick where the hard-disk is replaced. To handle this situation gracefully, client xlator is enhanced to perform finodelk, fxattrop, writev, readv using anonymous fds if the file is yet to be re-opened. If the fop succeeds then client xlator attempts re-open. Change-Id: I1cc6d1bbf8227cd996868ab2ed0a57fb05e00017 BUG: 821056 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/4358 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* protocol/client: Add fdctx back to saved-list after reopenPranith Kumar K2013-02-034-451/+76
| | | | | | | | | Change-Id: I01caa1b51570359e6e3ffe1ffb7279cbdb0b0c64 BUG: 821056 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/4357 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* glusterfs : Moved option files, and statedumps from /tmpAvra Sengupta2013-01-292-2/+3
| | | | | | | | | Change-Id: Ibdede396c4d6859225937316b7a59a661bcaf9f5 BUG: 764890 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/4422 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* glusterd/cli: Updated the options descriptions for "volume set help"Avra Sengupta2013-01-212-3/+9
| | | | | | | | | Change-Id: I0db00b7334bb9707ab48bd661ac03a3ad818d6e4 BUG: 893458 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/4393 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* core: fixes for gcc's '-pedantic' flag buildAvra Sengupta2013-01-211-4/+2
| | | | | | | | | | | | | * warnings on 'void *' arguments * warnings on empty initializations * warnings on empty array (array[0]) Change-Id: Iae440f54cbd59580eb69f3ecaed5a9926c0edf95 BUG: 875913 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/4219 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* protocol/server: do server_connection_put only if bound_xl is NULLRaghavendra Bhat2013-01-161-1/+1
| | | | | | | | | | | | | | | If getting bound_xl fails, then while putting the connection back we should also check for bound_xl pointer for NULL apart from the op_ret and the connection object. We were checking just op_ret and conn pointer till now and if the mount from a machine is not allowed as auth.allow did not permit it, then also we were destroying the connection object. Change-Id: Iac43e8dc078d905edafb44d6670f88989a8f82a3 BUG: 881062 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/4373 Reviewed-by: Amar Tumballi <amarts@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* protocol/client: print a message regarding brick status in case of failureKrutika Dhananjay2012-12-201-1/+3
| | | | | | | | | | | | | | that way, it would help admins to look at the corresponding brick directly. All credit goes to Amar. Change-Id: I959df59111864cc0574945d827f8fe5f2d919491 BUG: 839021 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/4341 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* core: remove all the 'inner' functions in codebaseAmar Tumballi2012-12-194-120/+145
| | | | | | | | | | | | | | | | * move 'dict_keys_join()' from api/glfs_fops.c to libglusterfs/dict.c - also added an argument which is treated as a filter function if required, currently useful for fuse. * now 'make CFLAGS="-std=gnu99 -pedantic" 2>&1 | grep nested' gives no output. Change-Id: I4e18496fbd93ae1d3942026ef4931889cba015e8 Signed-off-by: Amar Tumballi <amarts@redhat.com> BUG: 875913 Reviewed-on: http://review.gluster.org/4187 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* protocol/server: Do not access key after GF_FREE in _delete_auth_opt()Krutika Dhananjay2012-12-191-11/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | PROBLEMS: 1.'key' becomes a dangling pointer after the first call to dict_del() returns, in _delete_auth_opt(). Therefore, the second call to fnmatch() is made with 'key' pointing to deallocated space. 2. Also, the name _delete_auth_opt seems to suggest that the function is intended to match and delete "auth" options from the dictionary. But it winds up deleting all the options irrespective of whether the pattern match was successful or not. The same is true with _copy_auth_opt(). FIX: Changed _delete_auth_opt() to delete the key ONLY if it matches either of the two patterns (auth.addr.*.allow and auth.addr.*.reject). Similarly, changed _copy_auth_opt() along the same lines. Change-Id: Ic8664e5a0a29cefe43cb59a27e32fbdbeac154b5 BUG: 881062 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/4337 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* Fix xdr_to_generic success checkKaushal M2012-12-092-49/+133
| | | | | | | | | | | | | | | | This patch fixes the success check for xdr_to_generic function across the codebase. Also, cleans up the brick_op actors table in glusterfsd-mgmt.c to make sure that the actors are called directly by rpcsvc. Change-Id: I3086585f30c44f69f1bc83665f89e30025f76d3a BUG: 884452 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/4278 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* protocol/client: log ENOENT errors in debug mode.Raghavendra Bhat2012-12-041-2/+3
| | | | | | | | | Change-Id: I9b4ffb4a2f6be7ff5a0521f6582a9bc6f172e26c BUG: 872490 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/4153 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* protocol/client: add an option to filter O_DIRECT flag in openAmar Tumballi2012-11-282-2/+26
| | | | | | | | | | | | | | | | with the option, the idea is all client-side caching will be disabled, where as on server side process, the fd will be treated as a regular fd, thus helping the performance better. "gluster volume set <VOLNAME> remote-dio enable" would set this option in client protocol volumes. Change-Id: Id2255a167137f8fee20849513e3011274dc829b4 Signed-off-by: Amar Tumballi <amarts@redhat.com> BUG: 845213 Reviewed-on: http://review.gluster.org/4206 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* protocols: Suppress getxattr log when errno is ENOENTPranith Kumar K2012-10-282-2/+5
| | | | | | | | | Change-Id: I3f4fe3f382aec5fd142cc409b80bd73aebd8b39b BUG: 861015 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/4097 Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* protocol/client: Conditional logging in client3_3_unlink_cbkVenkatesh Somyajulu2012-10-121-1/+5
| | | | | | | | | Change-Id: I4af398362cdb3f99782dcd3728988e4cf1fbb479 BUG: 861925 Signed-off-by: Venkatesh Somyajulu <vsomyaju@redhat.com> Reviewed-on: http://review.gluster.org/4069 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* client-handshake: synchronize config.remote_port setting b/wRaghavendra G2012-10-111-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | rpc_clnt_reconnect and client_query_portmap_cbk problem: ------- Theoretically there is a possibility that we could complete querying the remote brick's port number before rpc_transport_connect can return. If rpc_clnt_reconnect happens to be the caller of rpc_transport_connect and we've already got the remote brick's port number by the time rpc_transport_connect returns, without synchronization, rpc_clnt_connect resets config.remote_port to zero even before we have attempted a connection with remote brick. fix: --- By making only poll thread do setting and resetting of config.remote_port, we avoid the race-condition. Change-Id: I51879ba1cac651a80ff5c9c070ec7fe1ceea9e05 BUG: 765051 Signed-off-by: Raghavendra G <raghavendra@gluster.com> Reviewed-on: http://review.gluster.org/4044 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
generated by cgit (git 2.34.1) at 2024-04-16 10:46:20 +0000