summaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* [Test] Add file rename test when dest exist in diff subvol combinationsPranav2020-07-081-0/+919
| | | | | | | | Tests to validate the behaviour of rename cases when destination file exists and is hashed or cached to different subvol combinations Change-Id: I44752a444d9c112d590efd66c48ff095c22fcecd Signed-off-by: Pranav <prprakas@redhat.com>
* [TestFix] Remove hot and cold bricks list - Part2Bala Konda Reddy M2020-07-084-22/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | For the non-tiered volume types, In few test cases while bringing bricks offline, collecting both hot_tier_bricks and cold_tier_bricks and it is not needed to collect hot and cold tier bricks. Removing tier kwarg in one of the test. Removing the hot and cold tiered bricks and collecting only bricks of the particular volume as mentioned below. Removing below section ``` bricks_to_bring_offline_dict = (select_bricks_to_bring_offline( self.mnode, self.volname)) bricks_to_bring_offline = list(filter(None, ( bricks_to_bring_offline_dict['hot_tier_bricks'] + bricks_to_bring_offline_dict['cold_tier_bricks'] + bricks_to_bring_offline_dict['volume_bricks']))) ``` Modifying as below for bringing bricks offline. ``` bricks_to_bring_offline = bricks_to_bring_offline_dict['volume_bricks'] ``` Change-Id: I4f59343b380ced498516794a8cc7c968390a8459 Signed-off-by: Bala Konda Reddy M <bala12352@gmail.com>
* [Test] IO conitinuity on brick down in EC VolumeLeela Venkaiah G2020-07-081-0/+215
| | | | | | | | | | | | | | | | | Test Steps: - Create, start and mount an EC volume in two clients - Create multiple files and directories including all file types on one directory from client 1 - Take arequal check sum of above data - Create another folder and pump different fops from client 2 - Fail and bring up redundant bricks in a cyclic fashion in all of the subvols maintaining a minimum delay between each operation - In every cycle create new dir when brick is down and wait for heal - Validate heal info on volume when brick down erroring out instantly - Validate arequal on brining the brick offline Change-Id: Ied5e0787eef786e5af7ea70191f5521b9d5e34f6 Signed-off-by: Leela Venkaiah G <lgangava@redhat.com>
* [Testfix] Fix test_mount_point_not_go_to_rofs failurekshithijiyer2020-07-061-34/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: Testcase test_mount_point_not_go_to_rofs fails every time in the CI runs with the below traceback: > ret = wait_for_io_to_complete(self.all_mounts_procs, self.mounts) tests/functional/arbiter/test_mount_point_while_deleting_files.py:137: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ build/bdist.linux-x86_64/egg/glustolibs/io/utils.py:290: in wait_for_io_to_complete ??? /usr/lib/python2.7/site-packages/glusto/connectible.py:247: in async_communicate stdout, stderr = p.communicate() /usr/lib64/python2.7/subprocess.py:800: in communicate return self._communicate(input) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = <subprocess.Popen object at 0x7febb64238d0>, input = None def _communicate(self, input): if self.stdin: # Flush stdio buffer. This might block, if the user has # been writing to .stdin in an uncontrolled fashion. > self.stdin.flush() E ValueError: I/O operation on closed file /usr/lib64/python2.7/subprocess.py:1396: ValueError This is because the self.io_validation_complete is never set to True in the testcase. Fix: Adding code to set self.io_validation_complete to True and moving code from TearDownClass to TearDown. Modifying logic to not add both clients to self.mounts. Change-Id: I51ed635e713838ee3054c4d1dd8c6cdc16bbd8bf Signed-off-by: kshithijiyer <kshithij.ki@gmail.com>
* [Libfix] Skip gluster_shared_storage deletionkshithijiyer2020-07-021-9/+24
| | | | | | | | | | | | | | | | Problem: In the present logic gluster_shared_storage gets deleted in the force cleanup, this causes nfs-ganesha testcases to fail. Fix: Add logic to check is shared_storage is enabled if enabled skip: 1. Peer cleanup and peer probe 2. Deleting gluster_shared_storage vol files Change-Id: I5219491e081bd36dd40342262eaba540ccf00f51 Signed-off-by: kshithijiyer <kshithij.ki@gmail.com>
* [Libfix] Fix is_linkto_file() compatible with newer platformsPranav2020-06-301-5/+2
| | | | | | | | | | | | | Problem: The 'file <file_path>' command output differs in newer platforms. An additional ',' is present in latest builds of the packages, causing tests which uses this method to fail on newer platforms. Fix: Modify the method to handle the latest package output as well Change-Id: I3e59a69b09b960e3a38131a3e76d664b34799ab1 Signed-off-by: Pranav <prprakas@redhat.com>
* [TestFix] Increased timeout for some TC'subansal2020-06-291-3/+5
| | | | | | | | Few TC's were failing sue to timeout issue increased timeout for those TC's Change-Id: Id62bee81e1cb6b8bb3a712858404c7092142072b Signed-off-by: ubansal <ubansal@redhat.com>
* [TestFix] Increasing timeout for healubansal2020-06-261-2/+2
| | | | | | | | As heal completion is failing intermitently for disperse volume, increased timeout for heal Change-Id: I5e7b7c8eb332ada1abc72389fc8ce883e269d226 Signed-off-by: ubansal <ubansal@redhat.com>
* [TestFix] Test FD IO's on replace-brick in EC volumeubansal2020-06-261-4/+41
| | | | | Change-Id: Ib39894e9f44c41f5539377c5c124ad45a786cbb3 Signed-off-by: ubansal <ubansal@redhat.com>
* [Test] Add file rename tests when dest file in src hashed/cached subvolPranav2020-06-251-0/+639
| | | | | | | | | Tests to validate behaviour of different scenarios of file rename cases, when destination file exists intially and is hashed to the source file hashed or cached subvol. Change-Id: Iec12d33c459cb966861d2efac2bae85103555cc1 Signed-off-by: Pranav <prprakas@redhat.com>
* [TestFix] Change method namesayaleeraut2020-06-241-1/+1
| | | | | | | | Changing the method name from test_readdirp_with_rebalance(self) to test_access_file_with_stale_linkto_xattr(self) Change-Id: I5503e301d65f96e38aa135827d8bc698a0371281 Signed-off-by: sayaleeraut <saraut@redhat.com>
* [Doc] Fix tox command code formattingkshithijiyer2020-06-241-4/+0
| | | | | Change-Id: I0ac4fca1b41921e01ee6003d01fd1557df97053c Signed-off-by: kshithijiyer <kshithij.ki@gmail.com>
* [Test] Check access file with stale linkto xattrsayaleeraut2020-06-241-0/+169
| | | | | | | | | | | | | | | | | | | | Description: The test script verfies that a file with stale linkto xattr can be accessed from a non-root user. Steps: 1) Create a volume and start it. 2) Mount the volume on client node using FUSE. 3) Create a file. 4) Enable performance.parallel-readdir and performance.readdir-ahead on the volume. 5) Rename the file in order to create a linkto file. 6) Force the linkto xattr values to become stale by changing the dht subvols in the graph. 7) Login as an non-root user and access the file. Change-Id: I4f275dedd47a851c2c4839f51cf1867638a66667 Signed-off-by: sayaleeraut <saraut@redhat.com>
* [LibFix] Monitor heal only on specific bricksLeela Venkaiah G2020-06-241-3/+12
| | | | | | | | | - Add an optional argument (bricks) to monitor_heal_completion - If provides, heal will be monitored on these set of bricks - Useful when dealing with EC volumes Change-Id: I1c3b137e98966e21c52e0e212efc493aca9c5da0 Signed-off-by: Leela Venkaiah G <lgangava@redhat.com>
* [TestFix] Remove tier related kwarg from testBala Konda Reddy M2020-06-241-1/+1
| | | | | | | | | Removing 'add_to_hot_tier' parameter as it defaults to False and it is not needed for the add-brick operation in the test as the volume type is not tier. Change-Id: I4a697a453e368197dfaf143d344a623d449e2614 Signed-off-by: Bala Konda Reddy M <bala12352@gmail.com>
* [Test] Start/Stop of snapd deamon on the cloned volumesrivickynesh2020-06-242-1/+404
| | | | | | | | | | | | Test Cases in this module tests the USS functionality of snapshots snapd on cloned volume and validated snapshots are present inside .snaps directory by terminating snapd on one by one nodes and validating .snaps directory is still accessible. Change-Id: I98d48268e7c5c5952a7f0f544960203d8634b7ac Signed-off-by: Sri Vignesh <sselvan@redhat.com>
* [Test] Set disperse quorum count to 5 and test EC volumeubansal2020-06-241-0/+309
| | | | | | | | | | | | | | | | | | | | | | On setting disperse quorum count to 5 , atleat 5 bricks should be online for successful writes on volume Steps: 1.Set disperse quorum count to 5 2.Write and read IO's 2.Bring down 1st brick 3.Writes and reads successful 4.Brind down 2nd brick 5.Writes should fail and reads successful 4.Write and read again 5.Writes should fail and reads successful 6.Rebalance should fail as quorum not met 7.Reset volume 8.Write and read IO's and vaildate them 9.Bring down redundant bricks 10.Write and read IO's and vaildate them Change-Id: Ib825783f01a394918c9016808cc62f6530fe8c67 Signed-off-by: ubansal <ubansal@redhat.com>
* [Lib] Add parse_vol_file methodPranav2020-06-241-0/+59
| | | | | | | | This method parses the given .vol file and returns the content as a dictionary. Change-Id: I6d57366ddf4d4c0249fff6faaca2ed005cd89e7d Signed-off-by: Pranav <prprakas@redhat.com>
* [LibFix] Add kwargs start_range and end_rangesayaleeraut2020-06-241-3/+21
| | | | | | | | | Adding the kwargs start_range and end_range to the method open_file_fd() so that FD can be opened for multiple files if required. Change-Id: Ia6d78941935c7fb26045d000c428aba9b9f2425b Signed-off-by: sayaleeraut <saraut@redhat.com>
* [TestFix] Remove hot and cold bricks list on regular volumesBala Konda Reddy M2020-06-2415-60/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | For the non-tiered volume types, In few test cases while bringing bricks offline, collecting both hot_tier_bricks and cold_tier_bricks and it is not needed to collect hot and cold tier bricks. Removing the hot and cold tiered bricks and collecting only bricks of the particular volume as mentioned below. Removing below section ``` bricks_to_bring_offline_dict = (select_bricks_to_bring_offline( self.mnode, self.volname)) bricks_to_bring_offline = list(filter(None, ( bricks_to_bring_offline_dict['hot_tier_bricks'] + bricks_to_bring_offline_dict['cold_tier_bricks'] + bricks_to_bring_offline_dict['volume_bricks']))) ``` Modifying as below for bringing bricks offline. ``` bricks_to_bring_offline = bricks_to_bring_offline_dict['volume_bricks'] ``` Change-Id: Icb1dc4a79cf311b686d839f2c9390371e42142f7 Signed-off-by: Bala Konda Reddy M <bala12352@gmail.com>
* [Testfix] Fix I/O of test_snap_delete_multiplekshithijiyer2020-06-221-7/+8
| | | | | | | | | | | | | | | | | | | | | | | | | Problem: test_snap_delete_multiple fails on I/O validation across all automation runs constantly with the below trace back: Traceback (most recent call last): File "/usr/share/glustolibs/io/scripts/file_dir_ops.py", line 1246, in <module> rc = args.func(args) File "/usr/share/glustolibs/io/scripts/file_dir_ops.py", line 374, in create_files base_file_name, file_types) File "/usr/share/glustolibs/io/scripts/file_dir_ops.py", line 341, in _create_files ret = pool.map(lambda file_tuple: _create_file(*file_tuple), files) File "/usr/lib64/python2.7/multiprocessing/pool.py", line 250, in map return self.map_async(func, iterable, chunksize).get() File "/usr/lib64/python2.7/multiprocessing/pool.py", line 554, in get raise self._value IOError: [Errno 17] File exists: '/mnt/testvol_distributed_glusterfs/testfile42.txt' Fix: Change the I/O to use --base-file-name parameter when running the I/O scripts. Change-Id: Ic5a8222f4fafeac4ac9aadc9c4d23327711ed9f0 Signed-off-by: kshithijiyer <kshithij.ki@gmail.com>
* [Test] Set disperse quorum count to 6 and test EC volumeubansal2020-06-221-0/+286
| | | | | | | | | | | | | | | | | | | | On setting disperse quorum count to 6 all bricks should be online for successful writes on volume Steps: 1.Set disperse quorum count to 6 2.Write and read IO's 2.Bring down 1 brick 3.Writes should fail and reads successful 4.Write and read again 5.Writes should fail and reads successful 6.Rebalance should fail as quorum not met 7.Reset volume 8.Write and read IO's and vaildate them 9.Bring down redundant bricks 10.Write and read IO's and vaildate them Change-Id: I93d418fd75d75fa3563d23f52fdd5aed71cfe540 Signed-off-by: ubansal <ubansal@redhat.com>
* [Test] mv and ls operations on ec volumesBala Konda Reddy M2020-06-191-0/+155
| | | | | | | | | | | | | | | | | | | Test Steps: 1. Create volume and mount the volume on 3 clients, c1(client1), c2(client2), and, c3(client3) 2. On c1, mkdir /c1/dir 3. On c2, Create 4000 files on mount point i.e. "/" 4. After step 3, Create next 4000 files on c2 on mount point i.e. "/" 5. On c1 Create 10000 files on /dir/ 6. On c3 start moving 4000 files created on step 3 from mount point to /dir/ 7. On c3, start ls in a loop for 20 iterations Note: Used upload scripts in setupclass, as there is one more test to be added in the same file. Change-Id: Ibab74433cbec4d6a4f9b494f257b3e517b8fbfbc Signed-off-by: Bala Konda Reddy M <bala12352@gmail.com>
* [Test]: Validate EC Eagerlock Behavior and Performancenchilaka2020-06-191-0/+264
| | | | | | | | | | Description: This script tests Disperse(EC) eagerlock default values and the performance impact on lookups with eagerlock and other-eagerlock default values Change-Id: Ia083d0d00f99a42865fb6f06eda75ecb18ff474f Signed-off-by: nchilaka <nchilaka@redhat.com>
* [Test] Add tc to check eager lock clikshithijiyer2020-06-191-0/+71
| | | | | | | | | | | | Testcase Steps: 1.Create an EC volume 2.Set the eager lock option by turning on disperse.eager-lock by using different inputs: - Try non boolean values(Must fail) - Try boolean values Change-Id: Iec875ce9fb4c8f7c68b012ede98bd94b82d04d7e Signed-off-by: kshithijiyer <kshithij.ki@gmail.com>
* [Test] Validate delete file picked for migrationsayaleeraut2020-06-191-0/+165
| | | | | | | | | | | | | | | | | | | Description: The test script verifies that if a file is picked for migration and if it is deleted, then the file should be removed successfully. Steps : 1) First create a big data file of 10GB. 2) Rename that file, such that after rename a linkto file is created (we are doing this to make sure that file is picked for migration.) 3) Add bricks to the volume and trigger rebalance using force option. 4) When the file has been picked for migration, delete that file from the mount point. 5) Check whether the file has been deleted or not on the mount-point as well as the back-end bricks. Change-Id: I137512a1d94a89aa811a3a9d61a9fb4002bf26be Signed-off-by: sayaleeraut <saraut@redhat.com>
* [Test] Add dht file rename cases where the destination file existsPranav2020-06-191-0/+540
| | | | | | | | Tests to validate behaviour of different scenarios of file rename cases, when destination file exists intially. Change-Id: I12cd2568540bec198f1c3cf85213e0107c9ddd6b Signed-off-by: Pranav <prprakas@redhat.com>
* [Testfix] Add reset-failed cmdkshithijiyer2020-06-181-3/+7
| | | | | | | | | | | | | | | | | | | | Problem: The testcase test_volume_create_with_glusterd_restarts consist of a asynchronous loop of glusterd restarts which fails in the lastest runs due to patch [1] and [2] added to glusterfs which limits the glusterd restarts to 6. Fix: Add `systemctl reset-failed glusterd` to the asynchronous loop. Links: [1] https://review.gluster.org/#/c/glusterfs/+/23751/ [2] https://review.gluster.org/#/c/glusterfs/+/23970/ Change-Id: Idd52bfeb99c0c43afa45403d71852f5f7b4514fa Signed-off-by: kshithijiyer <kshithij.ki@gmail.com>
* [TestFix] Remove 'replicated' from volume typeLeela Venkaiah G2020-06-171-1/+1
| | | | | | | - Test is designed to run on EC volumes only Change-Id: Ice6a77422695ebabbec6b9cfd910e453e5b2c81a Signed-off-by: Leela Venkaiah G <lgangava@redhat.com>
* [Test] Checks all types of heal on EC volumeubansal2020-06-171-0/+285
| | | | | | | | | | | | | | | | Steps: 1.Create a volume and mount it 2.Create a directory, dir1 and run different types of IO's 3.Create a directory, dir2 4.Bring down redundant bricks 5.Write IO's to directory dir2 6.Create a directory, dir3 and run IO's(read,write,ammend) 7.Bring up bricks 8.Monitor heal 9.Check for data intergrity of dir1 Change-Id: I9a7e366084bb46dcfc769b1d98b89b303fc16150 Signed-off-by: ubansal <ubansal@redhat.com>
* [Libfix] Add retry logic to restart_glusterd()kshithijiyer2020-06-172-19/+14
| | | | | | | | | | | | | | | | | | | | | | Problem: Patch [1] and [2] sent to glusterfs where changes are made to glusterd.service.in to not allow glusterd restart for more than 6 times within an hour, due this glusterd restarts present in testcases may fail as there is no way to figure out when we reach the 6 restart limit. Fix: Add code to check if glusterd restart has failed if true then call reset_failed_glusterd(), and redo the restart. Links: [1] https://review.gluster.org/#/c/glusterfs/+/23751/ [2] https://review.gluster.org/#/c/glusterfs/+/23970/ Change-Id: I041a019f9a8757d8fead00302e6bbcd6563dc74e Signed-off-by: kshithijiyer <kshithij.ki@gmail.com>
* [Test] Rename of filetypes on brick downLeela Venkaiah G2020-06-171-0/+221
| | | | | | | | | | | | | | | | | | Test Steps: 1. Create an EC volume 2. Mount the volume using FUSE on two different clients 3. Create ~9 files from one of the client 4. Create ~9 dir with ~9 files each from another client 5. Create soft-links, hard-links for file{4..6}, file{7..9} 6. Create soft-links for dir{4..6} 7. Begin renaming the files, in multiple iterations 8. Bring down a brick while renaming the files 9. Bring the brick online after renaming some of the files 10. Wait for renaming of the files 11. Validate no data loss and files are renamed successfully Change-Id: I6d98c00ff510cb473978377bb44221908555681e Signed-off-by: Leela Venkaiah G <lgangava@redhat.com>
* [Test] Git clone on glusterfs volumeBala Konda Reddy M2020-06-161-0/+80
| | | | | | | | | | | Test Steps: 1. Create a volume and mount it on one client 2. git clone the glusterfs repo on the glusterfs volume 3. Set the performance options to off 4. Repeat step 2 on a different directory Change-Id: Iaecce7cd14ecf84058c75847a037c6589d3833e9 Signed-off-by: Bala Konda Reddy M <bala12352@gmail.com>
* [Test]: Check File descriptor in ECubansal2020-06-161-0/+174
| | | | | | | | | | Steps: 1.Open a File descriptor when a brick in down 2.Write to File descriptor when brick has come up and check if healing is complete Change-Id: I721cedf4dc6a420f0c153d4232b046f780da201b Signed-off-by: ubansal <ubansal@redhat.com>
* [Lib] Add library for reset-failedkshithijiyer2020-06-162-4/+39
| | | | | | | | | | | | | | | | | Adding library function reset_failed_glusterd() and modifying scratch_cleanup() to use reset_failed_glusterd(). This is needed because of patch [1] and [2] sent to glusterfs where changes are made to glusterd.service.in to not allow glusterd restart for more than 6 times within an hour. Links: [1] https://review.gluster.org/#/c/glusterfs/+/23751/ [2] https://review.gluster.org/#/c/glusterfs/+/23970/ Change-Id: I25f982517420f20f11a610e8a68afc71f3b7f2a9 Signed-off-by: kshithijiyer <kshithij.ki@gmail.com>
* [LibFix] Add arequal support on given pathubansal2020-06-151-3/+7
| | | | | | | | Calculates arequal for a particular path in the mountpoint Change-Id: I018302e6dbb11a9c11d42fc0381ec4183b3725a0 Signed-off-by: ubansal <ubansal@redhat.com>
* [Test] Add dht file rename cases where destination doesn't existPranav2020-06-151-0/+450
| | | | | | | | Tests to validate behaviour of different scenarios of file rename cases, when destination file doesn't exist intially. Change-Id: I3f22d61d9bd2fa5c54930715e2ef976c7d1ba54e Signed-off-by: Pranav <prprakas@redhat.com>
* [Lib] Add Lib to open FDubansal2020-06-101-1/+19
| | | | | | | | Opens a FD to a file , waits and then writes to the file Change-Id: Ib993b646ba45d2b05a5765e02b6b1b7b2869ecd3 Signed-off-by: ubansal <ubansal@redhat.com>
* [Testfix] Fix teardown failure for test_deem_statfs_quotad.pyPranav2020-06-101-2/+2
| | | | | | | | | | | | | | | Problem: As in setUpClass, the setup_volume method is used for volume creation, volume mount is not done. But in teardown, unmount_volume_and_cleanup_volume is used. This causes teardown to fail Fix: change unmount_volume_and_cleanup_volume to cleanup_volume Change-Id: Ia9bb6bcd36ce9ddb9c200ef18779df47a009d42f Signed-off-by: Pranav <prprakas@redhat.com>
* [TestFix] Decreased the IO's and increase timeoutsubansal2020-06-101-4/+6
| | | | | | | | | | | Decreased the deep directory creation from 15 to 10 As heal completion within 20 mins for disperse was intermitently failing Also increased timeout for bricks to be online and healing to complete Change-Id: I1c1eef383ca4bf3f7f1f89e00da096bbbf57b9db Signed-off-by: ubansal <ubansal@redhat.com>
* [Test] Add tc to check max-bricks-per-processkshithijiyer2020-06-101-3/+98
| | | | | | | | | | | | | | | | | | | | | Test Case: - Create a gluster cluster - With brick mux set to disable: 1.Set cluster.max-bricks-per-process to int and check error message(Must fail) 2.Set cluster.max-bricks-per-process to string(Must fail) - With brick mux set to enable: 1.Set cluster.max-bricks-per-process to string(Must fail) 2.Set cluster.max-bricks-per-process to 0 3.Set cluster.max-bricks-per-process to 1 and check error message.(Must fail) 4.Set cluster.max-bricks-per-process to int value > 1. Also fixing small issues observed when running all the tests in the file. Change-Id: Iad27cd5bbeccc2bd2f0a7e510f881b0ffcb0d3b6 Signed-off-by: kshithijiyer <kshithij.ki@gmail.com>
* [Libfix] Fix find_specific_hashed methodPranav2020-06-101-2/+6
| | | | | | | | | | | | | | | Problem: There are scenarios where multiple files are to be renamed to hash to a particular subvol. The existing method returns the same name as the loop always starts from 1. Fix: Adding an optional argument, existing_names which contains names already hashed to the subvol. An additional check is added to ensure the name found is not already used Change-Id: I453ee290c8462322194cebb42c40e8fbc7c373ed Signed-off-by: Pranav <prprakas@redhat.com>
* [Lib] Add method set_rebalance_throttle()sayaleeraut2020-06-091-0/+30
| | | | | | | | | The method takes mnode, volname and throttle-type as parameters. It sets the rebal-throttle for the volume as per the mentioned throttle-type. Change-Id: I9eb14e39f87158c9ae7581636c2cad1333fd573c Signed-off-by: sayaleeraut <saraut@redhat.com>
* [LibFix] Correct the name for dist-arbiter volumesayaleeraut2020-06-091-2/+2
| | | | | | | | | | | The volume distributed-arbiter was mentined as "distributed-arbiter: &distrbuted_arbiter" and "type: distributed_arbiter" under "volume_types:"; but it must be "&distrbuted-arbiter" and "type: distributed-arbiter", in accordance with the format in gluster_base_class.py Change-Id: I4a35a8827f26050328acfeddc3ce930225181e7a Signed-off-by: sayaleeraut <saraut@redhat.com>
* [TestFix] Correct the library name for a functionsayaleeraut2020-06-081-3/+3
| | | | | | | | | The function "set_volume_options()" is a part of "volume_ops" lib, but was wrongly imported from "volume_libs" lib earlier. Corrected the import statement. Change-Id: I7295684e7a564468ac42bbe1f00643ee150f769d Signed-off-by: sayaleeraut <saraut@redhat.com>
* [Testfix] Move teardownclass to teardownkshithijiyer2020-06-084-43/+43
| | | | | | | | | | | | | | | | | | Problem: A pattern was observed where testcases which were passing were throwing error in teadownclass this was becuase docleanup was running before teadownclass and when teardownclass was executed it failed as the setup was already cleaned. Solution: Change code to teardown from teardownclass and move setup volume code to setup from setupclass. Change-Id: I37c6fde1f592224c114148f0ed7215b2494b4502 Signed-off-by: kshithijiyer <kshithij.ki@gmail.com>
* [Test] Check stack overflow in readdirpsayaleeraut2020-06-051-0/+131
| | | | | | | | | | | | | | | | | | | Description: The TC checks that there is no stack overflow in readdirp with parallel-readdir enabled. Steps : 1) Create a volume. 2) Mount the volume using FUSE. 3) Enable performance.parallel-readdir and performance.readdir-ahead on the volume. 4) Create 10000 files on the mount point. 5) Add-brick to the volume. 6) Perform fix-layout on the volume (not rebalance). 7) From client node, rename all the files, this will result in creation of linkto files on the newly added brick. 8) Do ls -l (lookup) on the mount-point. Change-Id: I821efea55e3f8981ecd307b93781f2da5790c548 Signed-off-by: sayaleeraut <saraut@redhat.com>
* [Test] Validate Consistent Time(ctime) featurenchilaka2020-06-051-0/+205
| | | | | | | | | Description: This testcase tests the new xattr glusterfs.mdata attributes when features.ctime is enabled Change-Id: I3c2dd6537f88b6d9da85aa6819c96e1c236a0d61 Signed-off-by: nchilaka <nchilaka@redhat.com>
* [Test] Add tc to check brickmux with wrong valueskshithijiyer2020-06-051-0/+30
| | | | | | | | | | | | Test Case: - Create a gluster cluster - Set cluster.brick-multiplex value to random string(Must fail) - Set cluster.brick-multiplex value to random int(Must fail) - Set cluster.brick-multiplex value to random special characters(Must fail) Change-Id: Ib0233668aad8d72572b1dd9d17a5d0c27c364250 Signed-off-by: kshithijiyer <kshithij.ki@gmail.com>
* [Test] Verify heal on EC volume on file appendsLeela Venkaiah G2020-06-051-0/+186
| | | | | | | | | | | | | | Test Steps: - create and mount EC volume 4+2 - start append to a file from client - bring down one of the bricks (say b1) - wait for ~minute and bring down another brick (say b2) - after ~minute bring up first brick (b1) - check the xattrs 'ec.size', 'ec.version' - xattrs of online bricks should be same as an indication to heal Change-Id: I81a5bad4a91dd891fbbc9d93ae3f76610237789e Signed-off-by: Leela Venkaiah G <lgangava@redhat.com>
generated by cgit (git 2.34.1) at 2024-04-24 21:03:52 +0000