# Release notes for Gluster 4.0.0

The Gluster community celebrates 13 years of development with this latest
release, Gluster 4.0. Including improved integration with containers, an
enhanced user experience, and a next-generation management framework,
4.0 release solidifies Gluster as the storage choice for scale out distributed
file system and cloud-native developers.

The most notable features and changes are documented on this page. A full list
of bugs that have been addressed is included further below.

- [Announcements](#announcements)
- [Major changes and features](#major-changes-and-features)
- [Major issues](#major-issues)
- [Bugs addressed in the release](#bugs-addressed)

## Announcements

1. As 3.13 is a short term maintenance release, features included
in that release are available with 4.0.0 as well, and could be of interest to
users upgrading to 4.0.0 from older than 3.13 releases. The 3.13 [release notes](http://docs.gluster.org/en/latest/release-notes/)
captures the list of features that were introduced with 3.13.

**NOTE:** As 3.13 was a short term maintenance release, it will reach end of
life (EOL) with the release of 4.0.0. ([reference](https://www.gluster.org/release-schedule/))

2. Releases that recieve maintenence updates post 4.0 release are, 3.10, 3.12,
4.0 ([reference](https://www.gluster.org/release-schedule/))

3. With this release, the CentOS storage SIG will not build server packages for
CentOS6. Server packages will be available for CentOS7 only. For ease of
migrations, client packages on CentOS6 will be published and maintained.

**NOTE**: This change was announced [here](http://lists.gluster.org/pipermail/gluster-users/2018-January/033212.html)

4. TBD: Release version changes

5. TBD: Glusterd2 as the mainstream management chioce from the next release

## Major changes and features

Features are categorized into the following sections,

- [Management](#management)
- [Monitoring](#monitoring)
- [Performance](#performance)
- [Geo-replication](#geo-replication)
- [Standalone](#standalone)
- [Developer related](#developer-related)

### Management

#### 1. GlusterD2
**Notes for users:**
TBD
- Need GD2 team to fill in enough links and information here covering,
    - What it is
    - Install and configuration steps
    - Future plans (what happens in 4.1.0 and further)

**Limitations:**

**Known Issues:**

### Monitoring

The lack of live monitoring support on top of GlusterFS till date was a
limiting factor for many users (and in many cases for developers too).
[Statedump](docs.gluster.org/en/latest/Troubleshooting/statedump/) is useful for debugging, but is heavy for
live monitoring.

Further, the existence of `debug/io-stats` translator was not known to many and
`gluster volume profile` was not recommended as it impacted performance.

With this release, glusterfs's core infrastructure itself gets some mechanisms
to provide internal information, that avoids the heavy weight nature of prior
monitoring mechanisms.

#### 1. Metrics collection across every FOP in every xlator
**Notes for users:**
Gluster now has in-built latency measures in the xlator abstraction, thus
enabling capture of metrics and usage patterns across workloads.

These measures are currently enabled by default.

**Limitations:**
This feature is auto-enabled and cannot be disabled.

Providing means to disable the same in future releases also may not be made
available, as the data generated is deemed critical to understand, tune, and
troubleshoot gluster.

#### 2. Monitoring support
**Notes for users:**
Currently, the only project which consumes metrics and provides basic
monitoring is [glustermetrics](https://github.com/amarts/glustermetrics), which provides a good idea on how to
utilize the metrics dumped from the processes.

Users can send SIGUSR2 signal to the process to dump the metrics, in
`/var/run/gluster/metrics/` directory.

**Limitations:**
Currently core gluster stack and memory management systems dump metrics. For
other translators and other core components, framework to provide more metrics
exists, but additional metrics are not added in this release.

### Performance
#### 1. EC: Make metadata [F]GETXATTR operations faster
**Notes for users:**
Optimized getxattr and fgetxattr in disperse volumes to speed up the operation.
Disperse translator, now forwards the request to one of the bircks that is
deemed to have a good copy, instead of all, thus improving the efficiency of the
operation.

#### 2. Allow md-cache to serve nameless lookup from cache
**Notes for users:**
The md-cache translator is enhanced to cache nameless lookups (typically seen
with NFS workloads). This helps speed up overall operations on the volume
reducing the number of lookups done over the network. Typical workloads that
will benefit from this enhancement are,
- NFS based access
- Directory listing with FUSE, when ACLs are enabled

#### 3. md-cache: Allow runtime addition of xattrs to the list of xattrs that md-cache caches
**Notes for users:**
md-cache was enhanced to cache extended attributes of a file or directory, for
gluster specific attributes. This has now been enhanced to cache user provided
attributes (xattrs) as well.

To add specific xattrs to the cache list, use the following command:
```
# gluster volume set <volname> xattr-cache-list "<xattr-name>,<xattr-name>,..."
```
Existing options, such as "cache-samba-metadata" "cache-swift-metadata" continue
to function. The new option "xattr-cache-list" appends to the list generated by
the existing options.

**Limitations:**
Setting this option overwrites the previous value set for this option. The
append to the existing list of xattr is not supported with this release.

#### 4. Cache last stripe of an EC volume while write is going on
**Notes for users:**
Disperse translator now has the option to retain a writethrough cache of the
last write stripe. This helps in improved small append sequential IO patterns
by reducing the need to read a partial stripe for appending operations.

To enable this use,
```
# gluster volume set <volname> disperse.stripe-cache <N>
```
Where, <N> is the number of stripes to cache.

#### 5. tie-breaker logic for blocking inodelks/entrylk in SHD
**Notes for users:**
Self-heal deamon locking has been enhanced to identify situations where an
slefheal deamon is actively working on an inode. This enables other selfheal
deamons to proceed with other entries in the queue, than waiting on a particular
entry, thus preventing starvation among selfheal threads.

#### 6. Independent eager-lock options for file and directory accesses
**Notes for users:**
A new option named 'disperse.other-eager-lock' has been added to make it
possible to have different settings for regular file accesses and accesses
to other types of files (like directories).

By default this option is enabled to keep the same behaviour as the previous
versions. If you have multiple clients creating, renaming or removing files
from the same directory, you can disable this option to improve the performance
for these users while still keeping best performance for file accesses.

### Geo-replication
#### 1. JSON output for Geo-rep status and config for Glusterd2 integration
**Notes for users:**
gsyncd config and status-get commands can now return data in JSON formats.

Use --json while using these commands to get the required outputs in JSON.

#### 2. Enhance Geo-replication to use Volinfo from Config file
**Notes for users:**
Geo-replication config file is enhanced to accept additional fields that contain
required master and slave volume information. Use the option,
`--use-gconf-volinfo` when using the monitor command, for it to pick these up
from the configuration file.

Config is enhanced with the following fields,
```
[vars]
  master-bricks=NODEID:HOSTNAME:PATH,..
  slave-bricks=NODEID:HOSTNAME,..
  master-volume-id=
  slave-volume-id=
  master-replica-count=
  master-disperse_count=
```
Note: Exising Geo-replication is not affected since this is activated only
when the option `--use-gconf-volinfo` is passed while spawning `gsyncd monitor`

#### 3. Geo-replication: Improve gverify.sh logs
**Notes for users:**
gverify log file names and locations are changed as follows,
1. Slave log file is changed from `<logdir>/geo-replication-slaves/slave.log`
   to, `<logdir>/geo-replication/gverify-slavemnt.log`
2. Master log file is separated from the slave log file under,
   `<logdir>/geo-replication/gverify-mastermnt.log`

#### 4. Geo-rep: Cleanup stale (unusable) XSYNC changelogs.
**Notes for users:**
Stale xsync logs were not cleaned up, causing accumulation of these on the
system. This change cleans up the stale xsync logs, if geo-replication has to
restart from a faulty state.

#### 5. Improve gsyncd configuration and arguments handling
**Notes for users:**
- https://github.com/gluster/glusterfs/issues/73
- Release notes:
    - Needs user facing documentation for newer options and such
    - There seems to be code improvement as well in the patches,
    so that may not be needed in the release notes

**Limitations:**

**Known Issues:**

### Standalone
#### 1. Ability to force permissions while creating files/directories on a volume
**Notes for users:**
Options have been added to the posix translator, to override default umask
values with which files and directories are created. This is particularly useful
when sharing content by applications based on GID. As the defaule mode bits
prevent such useful sharing, and supercede ACLs in this regard, these options
are provided to control this behavior.

Command usage is as follows:
```
# gluster volume set <volume name> storage.<option-name> <value>
```
The valid `<value>` ranges from 0000 to 0777

`<option-name>` are:
  - create-mask
  - create-directory-mask
  - force-create-mode
  - force-create-directory

Options "create-mask" and "create-directory-mask" are added to remove the
mode bits set on a file or directory when its created. Default value of these
options is 0777. Options "force-create-mode" and "force-create-directory" sets
the default permission for a file or directory irrespective of the clients
umask. Default value of these options is 0000.

#### 2. Replace MD5 usage to enable FIPS support
**Notes for users:**
Previously, if gluster was run on a FIPS enabled system, it used to crash
because MD5 is not FIPS compliant and gluster consumes MD5 checksum in
various places like self-heal and geo-replication. This has been fixed by
replacing MD5 with SHA256 which is FIPS compliant.

However, in order for AFR self-heal to work correctly during rolling upgrade
to 4.0, we have tied this to a volume option called `fips-mode-rchecksum`.

`gluster volume set <VOLNAME> fips-mode-rchecksum on` has to be performed post
upgrade to change the defaults from MD5 to SHA256. Post this gluster processes
will run clean on a FIPS enabled system.

NOTE: Once glusterfs 3.x is EOL'ed, the usage of the option to control this
change will be removed.

#### 3. Dentry fop serializer xlator on brick stack
**Notes for users:**
This feature strengthens consistency of the file system, trading it for some
performance and is strongly suggested for workloads where consistency is
required.

For use-cases that involve a large number of renames or frequent creations and
deletions, the meta-data about the files and directories shared across the
clients were not always consistent. They do eventually become consistent, but
a large proportion of applications are not built to handle eventual consistency.

This feature can be enabled as follows,
```
# gluster volume set <volname> features.sdfs enable
```

**Limitations:**
This feature is released as a preview, as performance implications are not known
completely.

#### 4. Add option to disable nftw() based deletes when purging the landfill directory
**Notes for users:**
The gluster brick processes use an optimized manner of deleting entire sub-trees
using the nftw call. With this release, an option is being added to toggle this
behavior in cases where this optimization is not desired.

This is not an exposed option, and needs to be controlled using the volume
graph. Adding the disable-landfill-purge option to the storage/posix translator
helps toggle this feature.

The default is always enabled, as in the older releases.

#### 5. Add option in POSIX to limit hardlinks per inode
**Notes for users:**
Added an option to POSIX that limits the number of hard links that can be
created against an inode (file). This helps when there needs to be a different
hardlink limit than what the local FS provides for the bricks.

The option to control this behavior is,
```
# gluster volume set <volname> storage.max-hardlinks <N>
```
Where, `<N>` is 0-0xFFFFFFFF. If the local file system that the brick is using
has a lower limit than this setting, that would be honoured.

Default is set to 100, setting this to 0 turns it off and leaves it to the
local file system defaults. Setting it to 1 turns off hard links.

#### 6. Enhancements for directory listing in readdirp
**Notes for users:**
Prior to this release, rebalance performed a fix-layout on a directory before
healing its subdirectories. If there were a lot of subdirs, it could take a
while before all subdirs were created on the newly added bricks. This led to
some missed directory listings.

This is changed with this relase to process children directories before the
parents, thereby changing the way rebalance acts (files within sub directories
are migrated first) and also resolving the directory listing issue.

### Developer related
#### 1. xlators should not provide init(), fini() and others directly, but have class_methods
**Notes for developers:**
This release brings in a new unified manner of defining xlator methods. Which
avoids certain unwanted side-effects of the older method (like having to have
certain symbols being defined always), and helps a cleaner single point
registration mechanism for all xlator methods.

The new method, needs just a single symbol in the translator code to be exposed,
which is named xlator_api.

The elements of this structure is defined [here](https://github.com/gluster/glusterfs/blob/release-4.0/libglusterfs/src/xlator.h#L1055) and an example usage of the
same can be seen [here](https://github.com/gluster/glusterfs/commit/5b4b25c697f93d3dfe352013a442f2ec73fd3b8b).

The older mechanism is still supported, but not preferred.

#### 2. Framework for distributed testing
**Notes for developers:**
A new framework for running the regression tests for Gluster is added. The
[README](https://github.com/gluster/glusterfs/blob/release-4.0/extras/distributed-testing/README) has details on how to use the same.

#### 3. New API for acquiring mandatory locks
**Notes for developers:**
The current API for byte-range locks glfs_posix_lock doesn't allow
applications to specify whether it is advisory or mandatory type lock. This
particular change is to introduce an extended byte-range lock API with an
additional argument for including the byte-range lock mode to be one among
advisory(default) or mandatory.

Refer to the [header](https://github.com/gluster/glusterfs/blob/release-4.0/api/src/glfs.h#L777) for details on how to use this API.

A sample test program can be found [here](https://github.com/gluster/glusterfs/blob/release-4.0/tests/basic/gfapi/mandatory-lock-optimal.c) that also helps in understanding the
usage of this API.

#### 4. New on-wire protocol (XDR) needed to support iattx and cleaner dictionary structure
**Notes for developers:**
With changes in the code to adapt to a newer iatt structure, and stricter data
format enforcement within dictionaries passed across the wire, and also as a
part of reducing technical debt around the RPC layer, this release introduces a
new RPC Gluster protocol version (4.0.0).

Typically this does not impact any development, other than to ensure that newer
RPCs that are added would need to be on the 4.0.0 version of the protocol and
dictionaries on the wire need to be better encoded.

The newer iatt structure can be viewed [here](https://github.com/gluster/glusterfs/blob/release-4.0/libglusterfs/src/iatt.h#L47).

An example of better encoding dictionary values for wire transfers can be seen
[here](https://github.com/gluster/glusterfs/blob/release-4.0/libglusterfs/src/dict.c#L2454).

[Here](https://github.com/gluster/glusterfs/blob/master/doc/developer-guide/rpc-for-glusterfs.new-versions.md) is some additional information on Gluster RPC programs for the inquisitive.

#### 5. The protocol xlators should prevent sending binary values in a dict over the networks
**Notes for developers:**
Dict data over the wire in Gluster was sent in binary. This has been changed
with this release, as the on-wire protocol wire is also new, to send XDR encoded
dict values across. In the future, any new dict type needs to also handle the
required XDR encoding of the same.

#### 6. Translator to handle 'global' options
**Notes for developers:**
GlusterFS process has around 50 command line arguments to itself. While many of
the options are initial settings, many others can change its value in volume
lifetime. Prior to this release there was no way to change a setting, other than
restarting the process for many of these options.

With the introduction of global option translator, it is now possible to handle
these options without restarts.

If contributing code that adds to the process options, strongly consider adding
the same to the global option translator. An example is provided [here](https://review.gluster.org/18316).

## Major issues

**None**

## Bugs addressed

Bugs addressed since release-3.13.0 are listed below.

- [#827334](https://bugzilla.redhat.com/827334): gfid is not there in the fsetattr and rchecksum requests being sent from protocol client
- [#1336889](https://bugzilla.redhat.com/1336889): Gluster's XDR does not conform to RFC spec
- [#1369028](https://bugzilla.redhat.com/1369028): rpc: Change the way client uuid is built
- [#1370116](https://bugzilla.redhat.com/1370116): Tests : Adding a test to check for inode leak
- [#1428060](https://bugzilla.redhat.com/1428060): write-behind: Allow trickling-writes to be configurable, fix usage of page_size and window_size
- [#1430305](https://bugzilla.redhat.com/1430305): Fix memory leak in rebalance
- [#1431955](https://bugzilla.redhat.com/1431955): [Disperse] Implement open fd heal for disperse volume
- [#1440659](https://bugzilla.redhat.com/1440659): Add events to notify disk getting fill
- [#1443145](https://bugzilla.redhat.com/1443145): Free runtime allocated resources upon graph switch or glfs_fini()
- [#1446381](https://bugzilla.redhat.com/1446381): detach start does not kill the tierd
- [#1467250](https://bugzilla.redhat.com/1467250): Accessing a file when source brick is down results in  that FOP being hung
- [#1467614](https://bugzilla.redhat.com/1467614): Gluster read/write performance improvements on NVMe backend
- [#1469487](https://bugzilla.redhat.com/1469487): sys_xxx() functions should guard against bad return values from fs
- [#1471031](https://bugzilla.redhat.com/1471031): dht_(f)xattrop does not implement migration checks
- [#1471753](https://bugzilla.redhat.com/1471753): [disperse] Keep stripe in in-memory cache for the non aligned write
- [#1474768](https://bugzilla.redhat.com/1474768): The output of the "gluster help" command is difficult to read
- [#1479528](https://bugzilla.redhat.com/1479528): Rebalance estimate(ETA) shows wrong details(as intial message of 10min wait reappears) when still in progress
- [#1480491](https://bugzilla.redhat.com/1480491): tests: Enable geo-rep test cases
- [#1482064](https://bugzilla.redhat.com/1482064): Bringing down data bricks in cyclic order results in arbiter brick becoming the source for heal.
- [#1488103](https://bugzilla.redhat.com/1488103): Rebalance fails on NetBSD because fallocate is not implemented
- [#1492625](https://bugzilla.redhat.com/1492625): Directory listings on fuse mount are very slow due to small number of getdents() entries
- [#1496335](https://bugzilla.redhat.com/1496335): Extreme Load from self-heal
- [#1498966](https://bugzilla.redhat.com/1498966): Test case ./tests/bugs/bug-1371806_1.t is failing
- [#1499566](https://bugzilla.redhat.com/1499566): [Geo-rep]: Directory renames are not synced in hybrid crawl
- [#1501054](https://bugzilla.redhat.com/1501054): Structured logging support for Gluster logs
- [#1501132](https://bugzilla.redhat.com/1501132): posix health check should validate time taken between write timestamp and read timestamp cycle
- [#1502610](https://bugzilla.redhat.com/1502610): disperse eager-lock degrades performance for file create workloads
- [#1503227](https://bugzilla.redhat.com/1503227): [RFE] Changelog option in a gluster volume disables with no warning if geo-rep is configured
- [#1505660](https://bugzilla.redhat.com/1505660): [QUOTA] man page of gluster should be updated to list quota commands
- [#1506104](https://bugzilla.redhat.com/1506104): gluster volume splitbrain info needs to display output of each brick in a stream fashion instead of buffering and dumping at the end
- [#1506140](https://bugzilla.redhat.com/1506140): Add quorum checks in post-op
- [#1506197](https://bugzilla.redhat.com/1506197): [Parallel-Readdir]Warning messages in client log saying 'parallel-readdir' is not recognized.
- [#1508898](https://bugzilla.redhat.com/1508898): Add new configuration option to manage deletion of Worm files
- [#1508947](https://bugzilla.redhat.com/1508947): glusterfs: Include path in pkgconfig file is wrong
- [#1509189](https://bugzilla.redhat.com/1509189): timer: Possible race condition between gf_timer_* routines
- [#1509254](https://bugzilla.redhat.com/1509254): snapshot remove does not cleans lvm for deactivated snaps
- [#1509340](https://bugzilla.redhat.com/1509340): glusterd does not write pidfile correctly when forking
- [#1509412](https://bugzilla.redhat.com/1509412): Change default versions of certain features to 3.13 from 4.0
- [#1509644](https://bugzilla.redhat.com/1509644): rpc: make actor search parallel
- [#1509647](https://bugzilla.redhat.com/1509647): rpc: optimize fop program lookup
- [#1509845](https://bugzilla.redhat.com/1509845): In distribute volume after glusterd restart, brick goes offline
- [#1510324](https://bugzilla.redhat.com/1510324): Master branch is broken because of the conflicts
- [#1510397](https://bugzilla.redhat.com/1510397): Compiler atomic built-ins are not correctly detected
- [#1510401](https://bugzilla.redhat.com/1510401): fstat returns ENOENT/ESTALE
- [#1510415](https://bugzilla.redhat.com/1510415): spurious failure of tests/bugs/glusterd/bug-1345727-bricks-stop-on-no-quorum-validation.t
- [#1510874](https://bugzilla.redhat.com/1510874): print-backtrace.sh failing with cpio version 2.11 or older
- [#1510940](https://bugzilla.redhat.com/1510940): The number of bytes of the quota specified in version 3.7 or later is incorrect
- [#1511310](https://bugzilla.redhat.com/1511310): Test bug-1483058-replace-brick-quorum-validation.t fails inconsistently
- [#1511339](https://bugzilla.redhat.com/1511339): In Replica volume 2*2 when quorum is set, after glusterd restart nfs server is coming up instead of self-heal daemon
- [#1512437](https://bugzilla.redhat.com/1512437): parallel-readdir = TRUE prevents directories listing
- [#1512451](https://bugzilla.redhat.com/1512451): Not able to create snapshot
- [#1512455](https://bugzilla.redhat.com/1512455): glustereventsd hardcodes working-directory
- [#1512483](https://bugzilla.redhat.com/1512483): Not all files synced using geo-replication
- [#1513692](https://bugzilla.redhat.com/1513692): io-stats appends now instead of overwriting which floods filesystem with logs
- [#1513928](https://bugzilla.redhat.com/1513928): call stack group list leaks
- [#1514329](https://bugzilla.redhat.com/1514329): bug-1247563.t is failing on master
- [#1515161](https://bugzilla.redhat.com/1515161): Memory leak in locks xlator
- [#1515163](https://bugzilla.redhat.com/1515163): centos regression fails for tests/bugs/replicate/bug-1292379.t
- [#1515266](https://bugzilla.redhat.com/1515266): Prevent ec from continue processing heal operations after PARENT_DOWN
- [#1516206](https://bugzilla.redhat.com/1516206): EC DISCARD doesn't punch hole properly
- [#1517068](https://bugzilla.redhat.com/1517068): Unable to change the Slave configurations
- [#1517554](https://bugzilla.redhat.com/1517554): help for volume profile is not in man page
- [#1517633](https://bugzilla.redhat.com/1517633): Geo-rep: access-mount config is not working
- [#1517904](https://bugzilla.redhat.com/1517904): tests/bugs/core/multiplex-limit-issue-151.t  fails sometimes in upstream master
- [#1517961](https://bugzilla.redhat.com/1517961): Failure of some regression tests on Centos7 (passes on centos6)
- [#1518508](https://bugzilla.redhat.com/1518508): Change GD_OP_VERSION to 3_13_0 from 3_12_0 for RFE https://bugzilla.redhat.com/show_bug.cgi?id=1464350
- [#1518582](https://bugzilla.redhat.com/1518582): Reduce lock contention on fdtable lookup
- [#1519598](https://bugzilla.redhat.com/1519598): Reduce lock contention on protocol client manipulating fd
- [#1520245](https://bugzilla.redhat.com/1520245): High mem/cpu usage, brick processes not starting and ssl encryption issues while testing scaling with multiplexing (500-800 vols)
- [#1520758](https://bugzilla.redhat.com/1520758): [Disperse] Add stripe in  cache even if file/data does not exist
- [#1520974](https://bugzilla.redhat.com/1520974): Compiler warning in dht-common.c because of a switch statement on a boolean
- [#1521013](https://bugzilla.redhat.com/1521013): rfc.sh should allow custom remote names for ORIGIN
- [#1521014](https://bugzilla.redhat.com/1521014): quota_unlink_cbk crashes when loc.inode is null
- [#1521116](https://bugzilla.redhat.com/1521116): Absorb all test fixes from 3.8-fb branch into master
- [#1521213](https://bugzilla.redhat.com/1521213): crash when gifs_set_logging is called concurrently
- [#1522651](https://bugzilla.redhat.com/1522651): rdma transport may access an obsolete item in gf_rdma_device_t->all_mr, and causes glusterfsd/glusterfs process crash.
- [#1522662](https://bugzilla.redhat.com/1522662): Store allocated objects in the mem_acct
- [#1522775](https://bugzilla.redhat.com/1522775): glusterd consuming high memory
- [#1522847](https://bugzilla.redhat.com/1522847): gNFS Bug Fixes
- [#1522950](https://bugzilla.redhat.com/1522950): io-threads is unnecessarily calling accurate time calls on every FOP
- [#1522968](https://bugzilla.redhat.com/1522968): glusterd bug fixes
- [#1523295](https://bugzilla.redhat.com/1523295): md-cache should have an option to cache STATFS calls
- [#1523353](https://bugzilla.redhat.com/1523353): io-stats bugs and features
- [#1524252](https://bugzilla.redhat.com/1524252): quick-read: Discard cache for fallocate, zerofill and discard ops
- [#1524365](https://bugzilla.redhat.com/1524365): feature/bitrot: remove internal xattrs from lookup cbk
- [#1524816](https://bugzilla.redhat.com/1524816): heketi was not removing the LVs associated with Bricks removed when Gluster Volumes were deleted
- [#1526402](https://bugzilla.redhat.com/1526402): glusterd crashes when 'gluster volume set help' is executed
- [#1526780](https://bugzilla.redhat.com/1526780): ./run-tests-in-vagrant.sh fails because of disabled Gluster/NFS
- [#1528558](https://bugzilla.redhat.com/1528558): /usr/sbin/glusterfs crashing on Red Hat OpenShift Container Platform node
- [#1528975](https://bugzilla.redhat.com/1528975): Fedora 28 (Rawhide) renamed the pyxattr package to python2-pyxattr
- [#1529440](https://bugzilla.redhat.com/1529440): Files are not rebalanced if destination brick(available size) is of smaller size than source brick(available size)
- [#1529463](https://bugzilla.redhat.com/1529463): JWT support without external dependency
- [#1529480](https://bugzilla.redhat.com/1529480): Improve geo-replication logging
- [#1529488](https://bugzilla.redhat.com/1529488): entries not getting cleared post healing of softlinks (stale entries showing up in heal info)
- [#1529515](https://bugzilla.redhat.com/1529515): AFR: 3-way-replication: gluster volume set cluster.quorum-count should validate max no. of brick count to accept
- [#1529883](https://bugzilla.redhat.com/1529883): glusterfind is extremely slow if there are lots of changes
- [#1530281](https://bugzilla.redhat.com/1530281): glustershd fails to start on a volume force start after a brick is down
- [#1530910](https://bugzilla.redhat.com/1530910): Use after free in cli_cmd_volume_create_cbk
- [#1531149](https://bugzilla.redhat.com/1531149): memory leak: get-state  leaking memory in small amounts
- [#1531987](https://bugzilla.redhat.com/1531987): increment of a boolean expression warning
- [#1532238](https://bugzilla.redhat.com/1532238): Failed to access volume via Samba with undefined symbol from socket.so
- [#1532591](https://bugzilla.redhat.com/1532591): Tests: Geo-rep tests are failing in few regression machines
- [#1533594](https://bugzilla.redhat.com/1533594): EC test fails when brick mux is enabled
- [#1533736](https://bugzilla.redhat.com/1533736): posix_statfs returns incorrect f_bfree values if brick is full.
- [#1533804](https://bugzilla.redhat.com/1533804): readdir-ahead: change of cache-size should be atomic
- [#1533815](https://bugzilla.redhat.com/1533815): Mark ./tests/basic/ec/heal-info.t as bad
- [#1534602](https://bugzilla.redhat.com/1534602): FUSE reverse notificatons are not written to fuse dump
- [#1535438](https://bugzilla.redhat.com/1535438): Take full lock on files in 3 way replication
- [#1535772](https://bugzilla.redhat.com/1535772): Random GlusterFSD process dies during rebalance
- [#1536913](https://bugzilla.redhat.com/1536913): tests/bugs/cli/bug-822830.t fails on Centos 7 and locally
- [#1538723](https://bugzilla.redhat.com/1538723): build: glibc has removed legacy rpc headers and rpcgen in Fedora28, use libtirpc
- [#1539657](https://bugzilla.redhat.com/1539657): Georeplication tests intermittently fail
- [#1539701](https://bugzilla.redhat.com/1539701): gsyncd is running gluster command to get config file path is not required
- [#1539842](https://bugzilla.redhat.com/1539842): GlusterFS 4.0.0 tracker
- [#1540438](https://bugzilla.redhat.com/1540438): Remove lock recovery logic from client and server protocol translators
- [#1540554](https://bugzilla.redhat.com/1540554): Optimize glusterd_import_friend_volume code path
- [#1540882](https://bugzilla.redhat.com/1540882): Do lock conflict check correctly for wait-list
- [#1541117](https://bugzilla.redhat.com/1541117): sdfs: crashes if the features is enabled
- [#1541277](https://bugzilla.redhat.com/1541277): dht_layout_t leak in dht_populate_inode_for_dentry
- [#1541880](https://bugzilla.redhat.com/1541880): Volume wrong size
- [#1541928](https://bugzilla.redhat.com/1541928): A down brick is incorrectly considered to be online and makes the volume to be started without any brick available
- [#1542380](https://bugzilla.redhat.com/1542380): Changes to self-heal logic w.r.t. detecting of split-brains
- [#1542382](https://bugzilla.redhat.com/1542382): Add quorum checks in post-op
- [#1542829](https://bugzilla.redhat.com/1542829): Too many log messages about dictionary and options
- [#1543487](https://bugzilla.redhat.com/1543487): dht_lookup_unlink_of_false_linkto_cbk fails with "Permission denied"
- [#1543706](https://bugzilla.redhat.com/1543706): glusterd fails to attach brick during restart of the node
- [#1543711](https://bugzilla.redhat.com/1543711): glustershd/glusterd is not using right port when connecting to glusterfsd process
- [#1544366](https://bugzilla.redhat.com/1544366): Rolling upgrade to 4.0 is broken
- [#1544638](https://bugzilla.redhat.com/1544638): 3.8 -> 3.10 rolling upgrade fails (same for 3.12 or 3.13) on Ubuntu 14
- [#1545724](https://bugzilla.redhat.com/1545724): libgfrpc does not export IPv6 RPC methods even with --with-ipv6-default
- [#1547635](https://bugzilla.redhat.com/1547635): add option to bulld rpm without server
- [#1547842](https://bugzilla.redhat.com/1547842): Typo error in __dht_check_free_space function log message
- [#1548264](https://bugzilla.redhat.com/1548264): [Rebalance] "Migrate file failed: <filepath>: failed to get xattr [No data available]" warnings in rebalance logs
- [#1548271](https://bugzilla.redhat.com/1548271): DHT calls dht_lookup_everywhere for 1xn volumes