summaryrefslogtreecommitdiffstats
path: root/xlators/protocol
Commit message (Collapse)AuthorAgeFilesLines
* cli/auth : auth.allow and auth.reject does not accept FQDN/host nameMohit Agrawal2017-04-101-8/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | Problem : At the time of set FQDN name to "auth.allow/auth.reject" through gluster cli,it does not accept FQDN/host name. Solution: Condition needs to be update in verify_host_name and gf_auth to accept FQDN/host name. Fix : Change the condition to accept FQDN/host Name. To verify the patch followed below procedure 1) Try to set FQDN name for auth.allow or auth.reject parameter gluster v set myvol auth.reject <fqdn name> It gives error "fqdn-name" is not a valid internet-address-list 2) After apply the patch it does not give any error. 3) To verify auth.allow/reject try to mount volume on some client. Change-Id: Ieb76cbb93d43323fd29c7ca04efe3790edb4281b BUG: 1321578 Signed-off-by: Mohit Agrawal <moagrawa@redhat.com> Reviewed-on: https://review.gluster.org/15086 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* protocol: corect parameter state->size in server3_3_writevZhou Zhengping2017-04-021-1/+4
| | | | | | | | | | | Change-Id: I1a3d558670e4320fe8508b5ab97deff9aacca5c7 BUG: 1436936 Signed-off-by: Zhou Zhengping <johnzzpcrystal@gmail.com> Reviewed-on: https://review.gluster.org/16962 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* protocol : fix auth-allow regressionAtin Mukherjee2017-03-302-3/+64
| | | | | | | | | | | | | | | | | | | | | | | | | | | One of the brick multiplexing patches (commit 1a95fc3) had some changes in gf_auth () & server_setvolume () functions which caused auth-allow feature to be broken. mount doesn't succeed even if it's part of the auth-allow list. This fix does the following: 1. Reintroduce the peer-info data back in gf_auth () so that fnmatch has valid input and it can decide on the result. 2. config-params dict should capture key values pairs for all the bricks in case brick multiplexing is on. In case brick multiplexing isn't enabled, then config-params should carry attributes from protocol/server such that all rpc auth related attributes stay in tact in the dictionary. Change-Id: I007c4c6d78620a896b8858a29459a77de8b52412 BUG: 1433815 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: https://review.gluster.org/16920 Tested-by: Jeff Darcy <jeff@pl.atyp.us> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jeff@pl.atyp.us> Reviewed-by: MOHIT AGRAWAL <moagrawa@redhat.com>
* protocol-client: Initialize the list_head before usingPoornima G2017-03-261-2/+4
| | | | | | | | | | | | | | | In client3_3_readdir(p)_cbk, in case of error conditions, it is possible that the list_head is used before initializing. Hence move the initialization before usage. Change-Id: Ie58902d079fdc58416d17b5fa5f61375decb1c99 BUG: 1435943 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: https://review.gluster.org/16948 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* protocol/server: Fix crash bug in unlink flowRichard Wareing2017-03-021-0/+4
| | | | | | | | | | | | | | | | Summary: Fixes a crash bug during unlink in server-rpc-fops.c Signed-off-by: Shreyas Siravara <sshreyas@fb.com> Change-Id: I049a9863ffd4003742276e0aa9e8d1224488182d BUG: 1428093 Tested-by: Shreyas Siravara <sshreyas@fb.com> Reviewed-on: https://review.gluster.org/16814 Tested-by: Vijay Bellur <vbellur@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* rpc/clnt: remove locks while notifying CONNECT/DISCONNECTRaghavendra G2017-03-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Locking during notify was introduced as part of commit aa22f24f5db7659387704998ae01520708869873 [1]. The fix was introduced to fix out-of-order CONNECT/DISCONNECT events from rpc-clnt to parent xlators [2]. However as part of handling DISCONNECT protocol/client does unwind saved frames (with failure) waiting for responses. This saved_frames_unwind can be a costly operation and hence ideally shouldn't be included in the critical section of notifylock, as it unnecessarily delays the reconnection to same brick. Also, its not a good practise to pass control to other xlators holding a lock as it can lead to deadlocks. So, this patch removes locking in rpc-clnt while notifying parent xlators. To fix [2], two changes are present in this patch: * notify DISCONNECT before cleaning up rpc connection (same as commit a6b63e11b7758cf1bfcb6798, patch [3]). * protocol/client uses rpc_clnt_cleanup_and_start, which cleans up rpc connection and does a start while handling a DISCONNECT event from rpc. Note that patch [3] was reverted as rpc_clnt_start called in quick_reconnect path of protocol/client didn't invoke connect on transport as the connection was not cleaned up _yet_ (as cleanup was moved post notification in rpc-clnt). This resulted in clients never attempting connect to bricks. Note that one of the neater ways to fix [2] (without using locks) is to introduce generation numbers to map CONNECT and DISCONNECTS across epochs and ignore DISCONNECT events if they don't belong to current epoch. However, this approach is a bit complex to implement and requires time. So, current patch is a hacky stop-gap fix till we come up with a more cleaner solution. [1] http://review.gluster.org/15916 [2] https://bugzilla.redhat.com/show_bug.cgi?id=1386626 [3] http://review.gluster.org/15681 Change-Id: I62daeee8bb1430004e28558f6eb133efd4ccf418 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> BUG: 1427012 Reviewed-on: https://review.gluster.org/16784 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Milind Changire <mchangir@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* protocol/client: Add gfid in request for better tcpdumpsPranith Kumar K2017-02-271-0/+2
| | | | | | | | | | | | | | | | | It is difficult to match opendir/releasedir or open/release calls without gfid associlation to find fd-leaks on the bricks. So assigning gfid also in the request which was already there in the on-wire format. BUG: 1425676 Change-Id: Iec908eeaa2f97295d45140a529b7f8fb834a1553 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: https://review.gluster.org/16706 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* libglusterfs, gfdb, glusterfs: Add missing breaksNigel Babu2017-02-261-0/+1
| | | | | | | | | | | | | | | | A few switches did not have breaks causing fall throughs. Most of them have been fixed with fall through comments for those that are intentional. Change-Id: I84c85726b542f38504b50fefab5eba5dbcd27a07 BUG: 1424894 Signed-off-by: Nigel Babu <nigelb@redhat.com> Reviewed-on: https://review.gluster.org/16677 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* libglusterfs, dht, locks, glusterd: Coverity fixesNigel Babu2017-02-231-5/+0
| | | | | | | | | | | | | | Fix up use after free bugs and dead code Change-Id: I8f79ed6b5108926c1fac31c147b5ecba79d10785 BUG: 1424905 Signed-off-by: Nigel Babu <nigelb@redhat.com> Reviewed-on: https://review.gluster.org/16666 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* rpcsvc: Add rpchdr and proghdr to iobref before submitting to transportPoornima G2017-02-151-7/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Issue: When fio is run on multiple clients (each client writes to its own files), and meanwhile the clients does a readdirp, thus the client which did a readdirp will now recieve the upcalls. In this scenario the client disconnects with rpc decode failed error. RCA: Upcall calls rpcsvc_request_submit to submit the request to socket: rpcsvc_request_submit currently: rpcsvc_request_submit () { iobuf = iobuf_new iov = iobuf->ptr fill iobuf to contain xdrised upcall content - proghdr rpcsvc_callback_submit (..iov..) ... if (iobuf) iobuf_unref (iobuf) } rpcsvc_callback_submit (... iov...) { ... iobuf = iobuf_new iov1 = iobuf->ptr fill iobuf to contain xdrised rpc header - rpchdr msg.rpchdr = iov1 msg.proghdr = iov ... rpc_transport_submit_request (msg) ... if (iobuf) iobuf_unref (iobuf) } rpcsvc_callback_submit assumes that once rpc_transport_submit_request() returns the msg is written on to socket and thus the buffers(rpchdr, proghdr) can be freed, which is not the case. In especially high workload, rpc_transport_submit_request() may not be able to write to socket immediately and hence adds it to its own queue and returns as successful. Thus, we have use after free, for rpchdr and proghdr. Hence the clients gets garbage rpchdr and proghdr and thus fails to decode the rpc, resulting in disconnect. To prevent this, we need to add the rpchdr and proghdr to a iobref and send it in msg: iobref_add (iobref, iobufs) msg.iobref = iobref; The socket layer takes a ref on msg.iobref, if it cannot write to socket and is adding to the queue. Thus we do not have use after free. Thank You for discussing, debugging and fixing along: Prashanth Pai <ppai@redhat.com> Raghavendra G <rgowdapp@redhat.com> Rajesh Joseph <rjoseph@redhat.com> Kotresh HR <khiremat@redhat.com> Mohammed Rafi KC <rkavunga@redhat.com> Soumya Koduri <skoduri@redhat.com> Change-Id: Ifa6bf6f4879141f42b46830a37c1574b21b37275 BUG: 1421937 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: https://review.gluster.org/16613 Reviewed-by: Prashanth Pai <ppai@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: soumya k <skoduri@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* protocol/client: Fix double free of client fdctx destroyRavishankar N2017-02-133-34/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the race between fd re-open code and fd release code, both of which free the fd context due to a race in certain variable checks as explained below: 1. client process (shd in the case of this BZ) sends an opendir to its children (client xlators) which send the fop to the bricks to get a valid fd. 2. Client xlator loses connection to the brick. fdctx->remotefd is -1 3. Client re-establishes connection. After handshake, it reopens the dir and sets fdctx->remotefd to a valid fd in client3_3_reopendir_cbk(). 4. Meanwhile, shd sends a fd unref after it is done with the opendir. This triggers a releasedir (since fd->refcount becomes 0). 5. client3_3_releasedir() sees that fdctx-->remotefd is a valid number (i.e not -1), sets fdctx->released=1 and calls client_fdctx_destroy() 6. As a continuation of step3, client_reopen_done() is called by client3_3_reopendir_cbk(), which sees that fdctx->released==1 and again calls client_fdctx_destroy(). Depending on when step-5 does GF_FREE(fdctx), we may crash at any place in step-6 in client3_3_reopendir_cbk() when it tries to access fdctx->{whatever}. Change-Id: Ia50873d11763e084e41d2a1f4d53715438e5e947 BUG: 1418629 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: https://review.gluster.org/16521 CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* libglusterfs+changetimerecorder: reduce log noiseJeff Darcy2017-02-101-1/+1
| | | | | | | | | | | | | | | The logging about translator options is so verbose that it significantly slows down scalability tests - sometimes even to the point where it induces timing-related failures. Quiet, please. Change-Id: If0766e2a80746bba586e67e6019ff7084d68b425 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: https://review.gluster.org/16569 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> Reviewed-by: Milind Changire <mchangir@redhat.com>
* core: run many bricks within one glusterfsd processJeff Darcy2017-01-305-199/+203
| | | | | | | | | | | | | | | | | | | | | | | This patch adds support for multiple brick translator stacks running in a single brick server process. This reduces our per-brick memory usage by approximately 3x, and our appetite for TCP ports even more. It also creates potential to avoid process/thread thrashing, and to improve QoS by scheduling more carefully across the bricks, but realizing that potential will require further work. Multiplexing is controlled by the "cluster.brick-multiplex" global option. By default it's off, and bricks are started in separate processes as before. If multiplexing is enabled, then *compatible* bricks (mostly those with the same transport options) will be started in the same process. Change-Id: I45059454e51d6f4cbb29a4953359c09a408695cb BUG: 1385758 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: https://review.gluster.org/14763 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* gluster: Typos in logs and commentsN Balachandran2017-01-191-1/+1
| | | | | | | | | | | | | | | Replaced 'recieve' with 'receive'. Change-Id: I4c1c9147db5437feb81e4c83ed074440aaa28e07 BUG: 1414645 Signed-off-by: N Balachandran <nbalacha@redhat.com> Reviewed-on: http://review.gluster.org/16429 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Manikandan Selvaganesh <manikandancs333@gmail.com> Tested-by: Manikandan Selvaganesh <manikandancs333@gmail.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* glusterd: Add info on op-version for clients in vol status outputSamikshan Bairagya2017-01-124-1/+42
| | | | | | | | | | | | | | | | | | | | | Currently the `gluster volume status <VOLNAME|all> clients` command gives us the following information on clients: 1. Brick name 2. Client count for each brick 3. hostname:port for each client 4. Bytes read and written for each client There is no information regarding op-version for each client. This patch adds that to the output. Change-Id: Ib2ece93ab00c234162bb92b7c67a7d86f3350a8d BUG: 1409078 Signed-off-by: Samikshan Bairagya <samikshan@gmail.com> Reviewed-on: http://review.gluster.org/16303 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* socket: socket disconnect should wait for poller thread exitRajesh Joseph2016-12-212-3/+4
| | | | | | | | | | | | | | | | | | | | | When SSL is enabled or if "transport.socket.own-thread" option is set then socket_poller is run as different thread. Currently during disconnect or PARENT_DOWN scenario we don't wait for this thread to terminate. PARENT_DOWN will disconnect the socket layer and cleanup resources used by socket_poller. Therefore before disconnect we should wait for poller thread to exit. Change-Id: I71f984b47d260ffd979102f180a99a0bed29f0d6 BUG: 1404181 Signed-off-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-on: http://review.gluster.org/16141 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kaushal M <kaushal@redhat.com> Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* client,server: Free xdr-allocated compound req/rsp arraysKrutika Dhananjay2016-12-202-1/+2
| | | | | | | | | | | Change-Id: I9e1829f4f73f001bba33005032e030f289e8d003 BUG: 1406252 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/16210 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* protocol/client: Fix potential mem-leaksKrutika Dhananjay2016-12-162-4/+1
| | | | | | | | | | | | | | | Commit 93eaeb9c93be3232f24e840044d560f9f0e66f71 introduces leaks in INODELK callback where a dict is unserialized twice, leading to dict leaks. Change-Id: I219ccb2279f237ebc2e4fc366af4775a461929b8 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/16156 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* afr, client: More mem-leak fixes in COMPOUND fop cbkKrutika Dhananjay2016-12-044-273/+168
| | | | | | | | | | | | | | | | | | | | | | Bugs found and fixed: 1. Use correct subvolume index in pre-op-writev compound cbk 2. Prevent use-after-free of local->compound_args members in compound fops cbk in protocol/client 3. Fix xdata and xattr leaks in client_process_response 4. Fix possible leak of xdata in client_pre_writev() in test mode. 5. Free req->compound_req_array.compound_req_array_val as well after freeing its members 6. Free tmp_rsp->flock.lk_owner.lk_owner_val in LK fop. Change-Id: I15b646d7d4e0e5cd4ea3d2d6452c815cf2eaf68f BUG: 1401218 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/16020 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* protocol/server: Fix mem-leaks in compound fopsKrutika Dhananjay2016-11-301-187/+116
| | | | | | | | | | | | | | | | * Remove spurious 'return' statement. * Free up 'compound_rsp_array_val' as well in the end. * Remove multiple refs on this_args->xdata. Change-Id: I212c6dbe4d81b0381c1323d05fdfcc853886b25b BUG: 1399578 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/15965 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* protocol/server: capture offset in seekRavishankar N2016-11-283-0/+10
| | | | | | | | | | | | | | | | | | | | | Problem: http://review.gluster.org/11482 implemented seek FOP but http://review.gluster.org/#/c/14137/ 'undid' the change where we pack the offset returned by seek in server xlator before sending it to the client. As a result, seek always returns zero to the client for SEEK_HOLE/ SEEK_DATA. Fix: I think 14137 removed it unintentionally, hence adding it back again. Signed-off-by: Ravishankar N <ravishankar@redhat.com> Change-Id: I67a1f7b53214b043c5291f5704be4a50b698f91c BUG: 1398076 Reviewed-on: http://review.gluster.org/15920 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* protocol/server: Print pargfid in logs for rename errorPranith Kumar K2016-11-271-2/+2
| | | | | | | | | | | BUG: 1394548 Change-Id: I42ee627c8cdf54158f083f9019a096ace449e3cc Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/15872 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Ravishankar N <ravishankar@redhat.com>
* protocol/server: Remove unused variableAnoop C S2016-11-221-2/+0
| | | | | | | | | | | Change-Id: I0d0a786b2d02d4db37c4da6194ee4b4feac31b63 BUG: 1198849 Signed-off-by: Anoop C S <anoopcs@redhat.com> Reviewed-on: http://review.gluster.org/15899 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* protocol/client: Fix iobref and iobuf leaks in COMPOUND fopKrutika Dhananjay2016-11-161-1/+2
| | | | | | | | | | | Change-Id: I408879aa2bbd8ea176fbc0d0eba5567e5df1b2b3 BUG: 1395687 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/15860 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* protocol/server: Print error-xlator namePranith Kumar K2016-11-161-182/+255
| | | | | | | | | | | | | | | | | | | | Problem: At the moment from which xlator the errors are stemming from is a mystery. Fix: With this patch we can find on the server side which xlator first gave the errno received by server xlator. I am not yet sure how to get this done for client side which has lot of copy_frame()s. May be another patch. Change-Id: Ie13307b965facf2a496123e81ce0bd6756f98ac9 BUG: 1394548 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/15836 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Vijay Bellur <vbellur@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* protocol/client: reduce memory usageN Balachandran2016-10-241-1/+1
| | | | | | | | | | | | | | | readdirp calls use a lot of memory in case of a large number of files. The dict->extra_free is not used here so free buf immediately. Change-Id: I097f5dde2df471f5834264152711110a3bdb7e9a BUG: 1380249 Signed-off-by: N Balachandran <nbalacha@redhat.com> Reviewed-on: http://review.gluster.org/15593 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* compound fops: Fix file corruption issueKrutika Dhananjay2016-10-243-7/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. Address of a local variable @args is copied into state->req in server3_3_compound (). But even after the function has gone out of scope, in server_compound_resume () this pointer is accessed and dereferenced. This patch fixes that. 2. Compound fops, by virtue of NOT having a vector sizer (like the one writev has), ends up having both the header and the data (in case one of its member fops is WRITEV) in the same hdr_iobuf. This buffer was not being preserved through the lifetime of the compound fop, causing it to be overwritten by a parallel write fop, even when the writev associated with the currently executing compound fop is yet to hit the desk, thereby corrupting the file's data. This is fixed by associating the hdr_iobuf with the iobref so its memory remains valid through the lifetime of the fop. 3. Also fixed a use-after-free bug in protocol/client in compound fops cbk, missed by Linux but caught by NetBSD. Finally, big thanks to Pranith Kumar K and Raghavendra Gowdappa for their help in debugging this file corruption issue. Change-Id: I6d5c04f400ecb687c9403a17a12683a96c2bf122 BUG: 1378778 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/15654 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* build: out-of-tree builds generates files in the wrong directoryKaleb S KEITHLEY2016-09-184-11/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | And minor cleanup of a few of the Makefile.am files while we're at it. Rewrite the make rules to do what xdrgen does. Now we can get rid of xdrgen. Note 1. netbsd6's sed doesn't do -i. Why are we still running smoke tests on netbsd6 and not netbsd7? We barely support netbsd7 as it is. Note 2. Why is/was libgfxdr.so (.../rpc/xdr/src/...) linked with libglusterfs? A cut-and-paste mistake? It has no references to symbols in libglusterfs. Note3. "/#ifndef\|#define\|#endif/" (note the '\'s) is a _basic_ regex that matches the same lines as the _extended_ regex "/#(ifndef|define|endif)/". To match the extended regex sed needs to be run with -r on Linux; with -E on *BSD. However NetBSD's and FreeBSD's sed helpfully also provide -r for compatibility. Using a basic regex avoids having to use a kludge in order to run sed with the correct option on OS X. Note 4. Not copying the bit of xdrgen that inserts copyright/license boilerplate. AFAIK it's silly to pretend that machine generated files like these can be copyrighted or need license boilerplate. The XDR source files have their own copyright and license; and their copyrights are bound to be more up to date than old boilerplate inserted by a script. From what I've seen of other Open Source projects -- e.g. gcc and its C parser files generated by yacc and lex -- IIRC they don't bother to add copyright/license boilerplate to their generated files. It appears that it's a long-standing feature of make (SysV, BSD, gnu) for out-of-tree builds to helpfully pretend that the source files it can find in the VPATH "exist" as if they are in the $cwd. rpcgen doesn't work well in this situation and generates files with "bad" #include directives. E.g. if you `rpcgen ../../../../$srcdir/rpc/xdr/src/glusterfs3-xdr.x`, you get an #include directive in the generated .c file like this: ... #include "../../../../$srcdir/rpc/xdr/src/glusterfs3-xdr.h" ... which (obviously) results in compile errors on out-of-tree build because the (generated) header file doesn't exist at that location. Compared to `rpcgen ./glusterfs3-xdr.x` where you get: ... #include "glusterfs3-xdr.h" ... Which is what we need. We have to resort to some Stupid Make Tricks like the addition of various .PHONY targets to work around the VPATH "help". Warning: When doing an in-tree build, -I$(top_builddir)/rpc/xdr/... looks exactly like -I$(top_srcdir)/rpc/xdr/... Don't be fooled though. And don't delete the -I$(top_builddir)/rpc/xdr/... bits Change-Id: Iba6ab96b2d0a17c5a7e9f92233993b318858b62e BUG: 1330604 Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/14085 Tested-by: Niels de Vos <ndevos@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* protocol/client: fix op_errno handling, was unused variableKaleb S. KEITHLEY2016-09-151-5/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | see comment in patch set one. Match the general logic flow of the other fop-cbks and eliminate the unused variable and its associated warning also see comment in patch set seven, re: correct handling of client_process_response(); and the associated BZ https://bugzilla.redhat.com/show_bug.cgi?id=1376328 http://review.gluster.org/14085 fixes a "pragma leak" where the generated rpc/xdr headers have a pair of pragmas that disable these warnings. With the warnings disabled, many unused variables have crept into the code base. And 14085 won't pass its own smoke test until all these warnings are fixed. BUG: 1369124 Change-Id: I7421ba3550770acc5564b7d6aba3290e027591f2 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15482 Reviewed-by: Niels de Vos <ndevos@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* xlators/protocol/server: fix unused variable warnings/errorsKaleb S. KEITHLEY2016-09-131-1/+0
| | | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a "pragma leak" where the generated rpc/xdr headers have a pair of pragmas that disable these warnings. With the warnings disabled, many unused variables have crept into the code base. And 14085 won't pass its own smoke test until all these warnings are fixed. BUG: 1369124 Change-Id: I087131cd9b5e2abffc6a67d6c61e88fb6784661a Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15483 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* protocol/client (no 4): fix unused variable warnings/errorsKaleb S. KEITHLEY2016-09-121-24/+0
| | | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a/the "leak" - via the generated rpc/xdr headers - of pragmas that mask these warnings. However 14085 won't pass the smoke test until all the warnings are fixed. BUG: 1369124 Change-Id: I7edef3c060b798fcb81d881caa04b346cef7a131 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@linux.keithley.org> Reviewed-on: http://review.gluster.org/15356 Tested-by: Kaleb KEITHLEY <kkeithle@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Poornima G <pgurusid@redhat.com>
* protocol-server: generate eventsPrasanna Kumar Kalever2016-09-062-2/+70
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch add/generate the events seen from/in the protocol server side, which will be consumed by the new eventing framework. ------------------------------------------------------------------------- | event | description | |-------------------------------|---------------------------------------| | EVENT_CLIENT_CONNECT | new client connected | |-------------------------------|---------------------------------------| | EVENT_CLIENT_AUTH_REJECT | client cannot be authenticated | |-------------------------------|---------------------------------------| | EVENT_CLIENT_DISCONNECT | client had disconnected | ------------------------------------------------------------------------- Thanks to "Raghavendra Talur" <rtalur@redhat.com> for all the help Change-Id: I4fda83fae7747507f64d81a7645cc3a8a2fbaeae BUG: 1369403 Signed-off-by: Prasanna Kumar Kalever <prasanna.kalever@redhat.com> Reviewed-on: http://review.gluster.org/15294 Tested-by: Prasanna Kumar Kalever <pkalever@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* protocol/client (no 5): fix unused variable warnings/errorsKaleb S. KEITHLEY2016-09-051-4/+0
| | | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a/the "leak" - via the generated rpc/xdr headers - of pragmas that mask these warnings. However 14085 won't pass the smoke test until all the warnings are fixed. BUG: 1369124 Change-Id: Ic209b1291927c56f009544eadebdc51ba5f77475 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@linux.keithley.org> Reviewed-on: http://review.gluster.org/15357 Smoke: Gluster Build System <jenkins@build.gluster.org> Tested-by: Kaleb KEITHLEY <kkeithle@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* protocol/client (no 2): fix unused variable warnings/errorsKaleb S. KEITHLEY2016-09-052-7/+0
| | | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a/the "leak" - via the generated rpc/xdr headers - of pragmas that mask these warnings. However 14085 won't pass the smoke test until all the warnings are fixed. BUG: 1369124 Change-Id: I54055b3b1038374b4e21432da48fdaeca2938289 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15339 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Anuradha Talur <atalur@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* protocol/client (no 1): fix unused variable warnings/errorsKaleb S. KEITHLEY2016-09-052-4/+0
| | | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a/the "leak" - via the generated rpc/xdr headers - of pragmas that mask these warnings. However 14085 won't pass the smoke test until all the warnings are fixed. BUG: 1369124 Change-Id: I8a24e3c02144860859d653ab7115895fb3066378 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15338 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Anuradha Talur <atalur@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* compound fops: Some fixes to compound fops frameworkAnuradha Talur2016-08-308-132/+873
| | | | | | | | | | | Change-Id: I808fd5f9f002a35bff94d310c5d61a781e49570b BUG: 1360169 Signed-off-by: Anuradha Talur <atalur@redhat.com> Reviewed-on: http://review.gluster.org/15010 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* protocol/server: fix unused variable warnings/errorsKaleb S. KEITHLEY2016-08-275-36/+5
| | | | | | | | | | | | | | | | | http://review.gluster.org/14085 fixes a/the "leak" - via the generated rpc/xdr headers - of pragmas that mask these warnings. However 14085 won't pass the smoke test until all the warnings are fixed. Change-Id: I5a48055c4b0a4a07dd511ad4f2e9ef823b9c60b2 BUG: 1369124 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15255 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* protocol/server: readlink rsp xdr will fail while readlink got an errorRyan Ding2016-08-243-3/+4
| | | | | | | | | | | | | | | | set gfs3_readlink_rsp.path with an empty string while error happen, to make xdr_gfs3_readlink_rsp happy. otherwise the original errno will be lost, and return an rpc internal errno instead. Change-Id: I36655b66df8b9f164e5bd21eb17244722c2f5a52 BUG: 1369530 Signed-off-by: Ryan Ding <ryan.ding@open-fs.com> Reviewed-on: http://review.gluster.org/15299 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* protocol/client: Unserialize xdata even if lookup failsAnuradha Talur2016-08-172-6/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: AFR relies on xdata returned by lookup to determine if there are any files that need healing. This info is further used to optimize readdirp. In case of lookups with negative return value, client xlator was sending NULL xdata. Due to absence of xdata, AFR conservatively assumes that there are files that need healing, which is incorrect. Solution: Even in case of unsuccessful lookups, send the xdata received by protocol client so that higher xlators can get the info that they rely on. Change-Id: Id3a1023eb536180888eb2c0b39050000b76f7226 BUG: 1366284 Signed-off-by: Anuradha Talur <atalur@redhat.com> Reviewed-on: http://review.gluster.org/15120 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Poornima G <pgurusid@redhat.com> Tested-by: Poornima G <pgurusid@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Ashish Pandey <aspandey@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* protocol/server: Fix client/server compatibilityAvra Sengupta2016-06-281-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | The 3.8 client expects a child_up key from the server indicating the status of the server translators. This key is not being sent by the servers running older versions, thereby breaking compatibility. With this patch we are treating the absence of the said key as an indication that the server trying to connect to this client is running an older version and hence in such a case we are setting conf->child_up as _gf_true explicitly. This should suffice in emulating the older behavior. Due to the nature of this bug, requiring two version to be reproducible, there are no testcases added for the same. Change-Id: I29e0a5c63b55380dc9db8e42852d7e95b64a2b2e BUG: 1350327 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/14811 Reviewed-by: Raghavendra G <rgowdapp@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.org>
* protocol: Add framework to send transaction id with recallPoornima G2016-06-102-2/+18
| | | | | | | | | | | | | | | | | | | | | | | | | Issue: The upcall(cache invalidation/recall) event is sent from the bricks to clients. In AFR/EC setup, it can so happen that all the bricks will send the upcall for the same event, and if AFR/EC doesn't filter out these duplicate notifications, the logic above cluster xlators can fail. Solution: Use transaction id to filter out duplicate notifications. This patch adds framework for duplicate notifications. AFR/EC can build up on this patch for deduping the notifications Change-Id: I66b08e63b8799bc5932f2b2545376138a5701168 BUG: 1319992 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/14647 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* libglusterfs: Negate all but O_DIRECT flag if present on anon fdsKrutika Dhananjay2016-06-091-1/+4
| | | | | | | | | | | | | | | | | | | This is to prevent any unforeseen problems that might arise due to writevs and readvs being wound with @flag parameter containing O_TRUNC or O_APPEND especially wrt translators like sharding and ec where O_TRUNC write or O_APPEND write on individual shards/fragments is not the same as O_TRUNC write or O_APPEND write as expected by the application. Change-Id: I9e5206a6ce2b1b70df61ff23b1c961cf25bf7ff9 BUG: 1342171 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/14665 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Smoke: Gluster Build System <jenkins@build.gluster.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* core, shard: Make shards inherit main file's O_DIRECT flag if presentKrutika Dhananjay2016-06-071-1/+1
| | | | | | | | | | | | | | | | | | If the application opens a file with O_DIRECT, the shards' anon fds would also need to inherit the flag. Towards this, shard xl would be passing the odirect flag in the @flags parameter to the WRITEV fop. This will be used in anon fd resolution and subsequent opening by posix xl. Change-Id: Iddb75c9ed14ce5a8c5d2128ad09b749f46e3b0c2 BUG: 1342171 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/14191 Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* protocol/client: Reflect readv/writev changes in filter-O_DIRECT descriptionPranith Kumar K2016-05-311-4/+5
| | | | | | | | | | | | | | | | Commit 74837896c38bafdd862f164d147b75fcbb619e8f introduced filtering of O_DIRECT option even for readv/writev but the option description is not updated. Change-Id: I7c2b69fdb496ca27d1b06a458f2f3eab0d16d417 BUG: 1322214 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/14441 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* cluster/ec: Use correct log levelsAshish Pandey2016-05-242-3/+3
| | | | | | | | | | | | | | | | | | | | | | Problem : Misleading messages are getting logged in mount logs and bricks log. "Mismatching xdata" and "Heal failed" are getting logged Solution : Reduce the level of logs from INFO, WARNING and NOTICE to DEBUG level wherever applicable OR use fop_log_level to get proper log level. Change-Id: Ia824c71e75ab683d3cb8949e1966ea09c9ccce72 BUG: 1231224 Signed-off-by: Ashish Pandey <aspandey@redhat.com> Reviewed-on: http://review.gluster.org/13266 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Xavier Hernandez <xhernandez@datalab.es> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* core: Honour mandatory lock flags during lock migrationAnoop C S2016-05-202-0/+8
| | | | | | | | | | | | | | | | | | | | | | lk_flags from posix_lock_t structure is the primary key used to differentiate locks as either advisory and mandatory type. During lock migration this field is not read in getactivelk() call path. So in order to copy the exact lock state from source to destination it is necessary to include lk_flags within lock_migration_info_t structure to maintain accurate state. This change also includes minor modifications to setactivelk() call to consider lk_flags during lock migration. Change-Id: I20a7b6b6a0f3bdac5734cce8a2cd2349eceff195 BUG: 1332501 Signed-off-by: Anoop C S <anoopcs@redhat.com> Reviewed-on: http://review.gluster.org/14189 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Susant Palai <spalai@redhat.com> Reviewed-by: Poornima G <pgurusid@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* upcall: pass dict with xattrs on xattr invalidationPoornima G2016-05-192-5/+16
| | | | | | | | | | | | | | | | | | In case of xattr invalidation, return a dict containing the updated xattrs. [ndevos: move chunks to change 12995 and only address the xattrs-dict here] Change-Id: I8733f06a519a9a0f24be1bb4b2c38c9c9dce0ce2 BUG: 1211863 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/12996 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: soumya k <skoduri@redhat.com> Tested-by: soumya k <skoduri@redhat.com>
* client: Fix the message idsPoornima G2016-05-101-2/+9
| | | | | | | | | | | | | The message id of PC_MSG_GFID_NULL was changed as a part of rebase of http://review.gluster.org/#/c/11597. Fixing the same Change-Id: I773e02fb5695b6b55700046f4a4298ec475f8991 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/14276 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* protocol/client: Filter o-direct in readv/writevPranith Kumar K2016-05-051-8/+15
| | | | | | | | | | | Change-Id: I519c666b3a7c0db46d47e08a6a7e2dbecc05edf2 BUG: 1322214 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/14215 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com>
* protocol/client: fix coding style violationsJeff Darcy2016-05-041-32/+37
| | | | | | | | | | | | | Commit 45fa52d7 added some massive violations of our 80-column rule. This commit fixes them. Change-Id: I7bb588b99dbbff4f0b9874ef10f200f73ac1b627 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/14192 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anuradha Talur <atalur@redhat.com>
generated by cgit (git 2.34.1) at 2024-04-23 09:54:30 +0000