summaryrefslogtreecommitdiffstats
path: root/xlators/performance/read-ahead
Commit message (Collapse)AuthorAgeFilesLines
* xlators: fixes logically dead code.yatipadia2019-10-031-5/+0
| | | | | | | | | | | | | | | This patch addresses CID-1124388. Problem: When we reach the "out" section in ra_priv_dump(), if the condition (ret && conf) holds true, then the value of "add_section" will always be true. So the condition (add_section == _gf_false) will be a dead code. Fix:"add_section" has no use in the whole block and was making part of the block as logically dead code and hence, removed it. Change-Id: Id7e0105fc9a5ca5b2c2d098c665e6e32ecc6b62b updates: bz#789278 Signed-off-by: yatipadia <ypadia@redhat.com>
* libglusterfs: cleanup iovec functionsXavi Hernandez2019-06-111-7/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch cleans some iovec code and creates two additional helper functions to simplify management of iovec structures. iov_range_copy(struct iovec *dst, uint32_t dst_count, uint32_t dst_offset, struct iovec *src, uint32_t src_count, uint32_t src_offset, uint32_t size); This function copies up to 'size' bytes from 'src' at offset 'src_offset' to 'dst' at 'dst_offset'. It returns the number of bytes copied. iov_skip(struct iovec *iovec, uint32_t count, uint32_t size); This function removes the initial 'size' bytes from 'iovec' and returns the updated number of iovec vectors remaining. The signature of iov_subset() has also been modified to make it safer and easier to use. The new signature is: iov_subset(struct iovec *src, int src_count, uint32_t start, uint32_t size, struct iovec **dst, int32_t dst_count); This function creates a new iovec array containing the subset of the 'src' vector starting at 'start' with size 'size'. The resulting array is allocated if '*dst' is NULL, or copied to '*dst' if it fits (based on 'dst_count'). It returns the number of iovec vectors used. A new set of functions to iterate through an iovec array have been created. They can be used to simplify the implementation of other iovec-based helper functions. Change-Id: Ia5fe57e388e23392a8d6cdab17670e337cadd587 Updates: bz#1193929 Signed-off-by: Xavi Hernandez <xhernandez@redhat.com>
* New xlator option to control enable/disable of xlators in Gd2Aravinda VK2018-12-071-0/+8
| | | | | | | | | | | | | Since glusterd2 don't maintain the xlator option details in code, it directly reads the xlators options table from `*.so` files. To support enable and disable of xlator new option added to the option table with the name same as xlator name itself. This change will not affect the functionality with glusterd1. Change-Id: I23d9e537f3f422de72ddb353484466d3519de0c1 updates: #302 Signed-off-by: Aravinda VK <avishwan@redhat.com>
* all: add xlator_api to many translatorsAmar Tumballi2018-12-061-0/+14
| | | | | | Fixes: #164 Change-Id: I93ad6f0232a1dc534df099059f69951e1339086f Signed-off-by: Amar Tumballi <amarts@redhat.com>
* libglusterfs: Move devel headers under glusterfs directoryShyamsundarR2018-12-055-16/+16
| | | | | | | | | | | | | | | | | | | | | | | | libglusterfs devel package headers are referenced in code using include semantics for a program, this while it works can be better especially when dealing with out of tree xlator builds or in general out of tree devel package usage. Towards this, the following changes are done, - moved all devel headers under a glusterfs directory - Included these headers using system header notation <> in all code outside of libglusterfs - Included these headers using own program notation "" within libglusterfs This change although big, is just moving around the headers and making it correct when including these headers from other sources. This helps us correctly include libglusterfs includes without namespace conflicts. Change-Id: Id2a98854e671a7ee5d73be44da5ba1a74252423b Updates: bz#1193929 Signed-off-by: ShyamsundarR <srangana@redhat.com>
* libglusterfs: rename macros roof and floor to not conflict with math.hRaghavendra Gowdappa2018-11-282-6/+6
| | | | | | Change-Id: I666eeb63ebd000711b3f793b948d4e0c04b1a242 Signed-off-by: Raghavendra Gowdappa <rgowdapp@redhat.com> Updates: bz#1644629
* all: fix the format string exceptionsAmar Tumballi2018-11-051-10/+6
| | | | | | | | | | | | | | | | Currently, there are possibilities in few places, where a user-controlled (like filename, program parameter etc) string can be passed as 'fmt' for printf(), which can lead to segfault, if the user's string contains '%s', '%d' in it. While fixing it, makes sense to make the explicit check for such issues across the codebase, by making the format call properly. Fixes: CVE-2018-14661 Fixes: bz#1644763 Change-Id: Ib547293f2d9eb618594cbff0df3b9c800e88bde4 Signed-off-by: Amar Tumballi <amarts@redhat.com>
* Land part 2 of clang-format changesGluster Ant2018-09-122-1380/+1317
| | | | | Change-Id: Ia84cc24c8924e6d22d02ac15f611c10e26db99b4 Signed-off-by: Nigel Babu <nigelb@redhat.com>
* Land clang-format changesGluster Ant2018-09-123-108/+88
| | | | Change-Id: I6f5d8140a06f3c1b2d196849299f8d483028d33b
* performance/read-ahead: stricter adherence to force-atime-updateRaghavendra G2018-07-191-12/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | Throwaway read-ahead cache in fstat only if force-atime-update is set. Note that fstat flushes read-ahead cache only for atime consistency. However if atime consistency is needed user is required to set force-atime-update which updates atime on backend fs even though application reads are served from read-ahead cache. So, if user has not set force-atime-update, atime won't be accurate and there is no point in flushing read-ahead cache in fstats. mounts requiring atime consistency have to mandatorily set force-atime-update. Also note that normally kernel interspers reads with fstat. So, read-ahead is not effective as fstats flush read-ahead-cache. Instead it regresses performance due to wasted network reads. It is recommended to turn off read-ahead if applications require atime consistency. This patch is aimed at applications which don't require atime consistency. Without atime consistency required, read-ahead cache is effective and increases performance of sequential reads. Change-Id: I122bbc410cee96661823f9c4b934383495c18446 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Fixes: bz#1601166
* performance/read-ahead: throwaway read-ahead cache of all fds on writes on ↵Raghavendra G2018-05-291-28/+32
| | | | | | | | | | | | | | | | | | any fd This is to make sure applications that read and write on different fds of the same file work. This patch also fixes two other issues: 1. while iterating over the list of open fds on an inode, initialize tmp_file to 0 for each iteration before fd_ctx_get to make sure we don't carry over the history from previous iterations. 2. remove flushing of cache in flush and fsync as by themselves, they don't modify the data Change-Id: Ib9959eb73702a3ebbf90badccaa16b2608050eff Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Updates: bz#1512691
* xlators/performance: Add pass-through optionVarsha Rao2018-04-111-0/+13
| | | | | | | | | | Add pass-through option in performance traslators. Set the option in GF_OPTION_INIT() and GF_OPTION_RECONF() Updates: #304 Change-Id: If1537450147d154905831e36f7162a32866d7ad6 Signed-off-by: Varsha Rao <varao@redhat.com>
* performance/read-ahead: volume option fixes for GD2Csaba Henk2018-01-221-0/+7
| | | | | | | Updates #302 Change-Id: I842ab746502bc4ff3b312ee19f397a6177edc6f7 Signed-off-by: Csaba Henk <csaba@redhat.com>
* all: Simplify component message id's definitionXavier Hernandez2017-12-141-93/+16
| | | | | | | | | This patch creates a new way of defining message id's that is easier and less error prone because it doesn't require so many manual changes each time a new component is defined or a new message created. Change-Id: I71ba8af9ac068f5add7e74f316a2478bc991c67b Signed-off-by: Xavier Hernandez <jahernan@redhat.com>
* performance/read-ahead: prevent stale data being returned to application.Raghavendra G2017-05-091-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Assume that fd is shared by two application threads/processes. T0 read is triggered from app-thread t1 and read call passes through write-behind. T1 app-thread t2 issues a write. The page on which read from t1 is waiting is marked stale T2 write-behind caches write and indicates to application as write complete. T3 app-thread t2 issues read to same region. Since, there is already a page for that region (created as part of read at T0), this read request waits on that page to be filled (though it is stale, which is a bug). T4 read (triggered at T0) completes from brick (with write still pending). Now both read requests from t1 and t2 are served this data (though data is stale from app-thread t2's perspective - which is a bug) T5 write is flushed to brick by write-behind. Fix is to not to serve data from a stale page, but instead initiate a fresh read to back-end. Change-Id: Id6af733464fa41bb4e81fd29c7451c73d06453fb BUG: 1414242 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: https://review.gluster.org/7447 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Csaba Henk <csaba@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Zhou Zhengping <johnzzpcrystal@gmail.com> Reviewed-by: Amar Tumballi <amarts@redhat.com>
* build: out-of-tree builds generates files in the wrong directoryKaleb S KEITHLEY2016-09-181-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | And minor cleanup of a few of the Makefile.am files while we're at it. Rewrite the make rules to do what xdrgen does. Now we can get rid of xdrgen. Note 1. netbsd6's sed doesn't do -i. Why are we still running smoke tests on netbsd6 and not netbsd7? We barely support netbsd7 as it is. Note 2. Why is/was libgfxdr.so (.../rpc/xdr/src/...) linked with libglusterfs? A cut-and-paste mistake? It has no references to symbols in libglusterfs. Note3. "/#ifndef\|#define\|#endif/" (note the '\'s) is a _basic_ regex that matches the same lines as the _extended_ regex "/#(ifndef|define|endif)/". To match the extended regex sed needs to be run with -r on Linux; with -E on *BSD. However NetBSD's and FreeBSD's sed helpfully also provide -r for compatibility. Using a basic regex avoids having to use a kludge in order to run sed with the correct option on OS X. Note 4. Not copying the bit of xdrgen that inserts copyright/license boilerplate. AFAIK it's silly to pretend that machine generated files like these can be copyrighted or need license boilerplate. The XDR source files have their own copyright and license; and their copyrights are bound to be more up to date than old boilerplate inserted by a script. From what I've seen of other Open Source projects -- e.g. gcc and its C parser files generated by yacc and lex -- IIRC they don't bother to add copyright/license boilerplate to their generated files. It appears that it's a long-standing feature of make (SysV, BSD, gnu) for out-of-tree builds to helpfully pretend that the source files it can find in the VPATH "exist" as if they are in the $cwd. rpcgen doesn't work well in this situation and generates files with "bad" #include directives. E.g. if you `rpcgen ../../../../$srcdir/rpc/xdr/src/glusterfs3-xdr.x`, you get an #include directive in the generated .c file like this: ... #include "../../../../$srcdir/rpc/xdr/src/glusterfs3-xdr.h" ... which (obviously) results in compile errors on out-of-tree build because the (generated) header file doesn't exist at that location. Compared to `rpcgen ./glusterfs3-xdr.x` where you get: ... #include "glusterfs3-xdr.h" ... Which is what we need. We have to resort to some Stupid Make Tricks like the addition of various .PHONY targets to work around the VPATH "help". Warning: When doing an in-tree build, -I$(top_builddir)/rpc/xdr/... looks exactly like -I$(top_srcdir)/rpc/xdr/... Don't be fooled though. And don't delete the -I$(top_builddir)/rpc/xdr/... bits Change-Id: Iba6ab96b2d0a17c5a7e9f92233993b318858b62e BUG: 1330604 Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/14085 Tested-by: Niels de Vos <ndevos@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* build: export minimum symbols from xlators for correct resolutionKaleb S KEITHLEY2015-12-221-1/+1
| | | | | | | | | | | | | | | | | | | | | | Revisiting http://review.gluster.org/#/c/11814/, which unintentionally introduced warnings from libtool about the xlator .so names. According to [1], the -module option must appear in the Makefile.am file(s); if -module is defined in a macro, e.g. in configure(.ac), then libtool will not recognize that this is a module and will emit a warning. [1] http://www.gnu.org/software/automake/manual/automake.html#Libtool-Modules Change-Id: Ifa5f9327d18d139597791c305aa10cc4410fb078 BUG: 1248669 Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/13003 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: soumya k <skoduri@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* build: export minimum symbols from xlators for correct resolutionKaleb S. KEITHLEY2015-09-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | We've been lucky that we haven't had any symbol collisions until now. Now we have a collision between the snapview-client's svc_lookup() and libntirpc's svc_lookup() with nfs-ganesha's FSAL_GLUSTER and libgfapi. As a short term solution all the snapview-client's FOP methods were changed to static scope. See http://review.gluster.org/11805. This works in snapview-client because all the FOP methods are defined in a single source file. This solution doesn't work for other xlators with FOP methods defined in multiple source files. To address this we link with libtool's '-export-symbols $symbol-file' (a wrapper around `ld --version-script ...` --- on linux anyway) and only export the minimum required symbols from the xlator sharedlib. N.B. the libtool man page says that the symbol file should be named foo.sym, thus the rename of *.exports to *.sym. While foo.exports worked, we will follow the documentation. Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> BUG: 1248669 Change-Id: I1de68b3e3be58ae690d8bfb2168bfc019983627c Reviewed-on: http://review.gluster.org/11814 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: soumya k <skoduri@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* performance translators : porting the missing gf_log to gf_msgHari Gowtham2015-08-312-3/+23
| | | | | | | | | Change-Id: I5cc2b4669b164fe09637c86da05d2d94589dd7e4 BUG: 1253149 Signed-off-by: Hari Gowtham <hgowtham@redhat.com> Reviewed-on: http://review.gluster.org/11906 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* feature/performace: Fix broken buildKotresh HR2015-06-281-1/+1
| | | | | | | | | | | | Fix the build broken because of patch http://review.gluster.org/#/c/9822/ Change-Id: I0ee502c0fad5be87186c80ab4729036f52f85fa3 BUG: 1194640 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/11451 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Niels de Vos <ndevos@redhat.com>
* Logging: Porting the performance translatorarao2015-06-273-32/+140
| | | | | | | | | | | | | logs to new logging framework. Change-Id: Ie6aaf8d30bd4457bb73c48e23e6b1dea27598644 BUG: 1194640 Signed-off-by: arao <arao@redhat.com> Reviewed-on: http://review.gluster.org/9822 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com>
* build: do not #include "config.h" in each fileNiels de Vos2015-05-293-15/+0
| | | | | | | | | | | | | | | | | | Instead of including config.h in each file, and have the additional config.h included from the compiler commandline (-include option). When a .c file tests for a certain #define, and config.h was not included, incorrect assumtions were made. With this change, it can not happen again. BUG: 1222319 Change-Id: I4f9097b8740b81ecfe8b218d52ca50361f74cb64 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/10808 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* Performance: Replace ASSERTS in xlator fini() with info messages, for the ↵Poornima G2015-03-101-0/+8
| | | | | | | | | | | | | | | | | known leaks. There are few known leaks in read-ahead and quick-read xlator fini(). Until they are fixed replacing the ASSERTS with info, else any call to glfs_fini() in debug mode will core dump. Change-Id: Id60c6f952574863fc77c7d101cb5d5e9113090d8 BUG: 1199436 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/9819 Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-by: Ravishankar N <ravishankar@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com>
* build: MacOSX Porting fixesHarshavardhana2014-04-241-2/+3
| | | | | | | | | | | | | | | | | | | | | git@forge.gluster.org:~schafdog/glusterfs-core/osx-glusterfs Working functionality on MacOSX - GlusterD (management daemon) - GlusterCLI (management cli) - GlusterFS FUSE (using OSXFUSE) - GlusterNFS (without NLM - issues with rpc.statd) Change-Id: I20193d3f8904388e47344e523b3787dbeab044ac BUG: 1089172 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Signed-off-by: Dennis Schafroth <dennis@schafroth.com> Tested-by: Harshavardhana <harsha@harshavardhana.net> Tested-by: Dennis Schafroth <dennis@schafroth.com> Reviewed-on: http://review.gluster.org/7503 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* read-ahead: handle iobref_merge() error gracefullyAnand Avati2013-11-261-1/+6
| | | | | | | | | | | | .. by UNWINDing ENOMEM rather than leaving pointers in vector which points to unref'ed (or even worse, re-used) iobufs. Change-Id: I849d8cbe5fc02ee992d4e28b7212c49aad4925c7 BUG: 1034398 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/6350 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@gmail.com>
* zerofill: Change the type of len argument of glfs_zerofill() to off_tBharata B Rao2013-11-141-1/+1
| | | | | | | | | | | | | | glfs_zerofill() can be potentially called to zero-out entire file and hence allow for bigger value of length parameter. Change-Id: I75f1d11af298915049a3f3a7cb3890a2d72fca63 BUG: 1028673 Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-on: http://review.gluster.org/6266 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: M. Mohan Kumar <mohan@in.ibm.com> Tested-by: M. Mohan Kumar <mohan@in.ibm.com> Reviewed-by: Anand Avati <avati@redhat.com>
* glusterfs: zerofill supportM. Mohan Kumar2013-11-101-0/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for a new ZEROFILL fop. Zerofill writes zeroes to a file in the specified range. This fop will be useful when a whole file needs to be initialized with zero (could be useful for zero filled VM disk image provisioning or during scrubbing of VM disk images). Client/application can issue this FOP for zeroing out. Gluster server will zero out required range of bytes ie server offloaded zeroing. In the absence of this fop, client/application has to repetitively issue write (zero) fop to the server, which is very inefficient method because of the overheads involved in RPC calls and acknowledgements. WRITESAME is a SCSI T10 command that takes a block of data as input and writes the same data to other blocks and this write is handled completely within the storage and hence is known as offload . Linux ,now has support for SCSI WRITESAME command which is exposed to the user in the form of BLKZEROOUT ioctl. BD Xlator can exploit BLKZEROOUT ioctl to implement this fop. Thus zeroing out operations can be completely offloaded to the storage device , making it highly efficient. The fop takes two arguments offset and size. It zeroes out 'size' number of bytes in an opened file starting from 'offset' position. This patch adds zerofill support to the following areas: - libglusterfs - io-stats - performance/md-cache,open-behind - quota - cluster/afr,dht,stripe - rpc/xdr - protocol/client,server - io-threads - marker - storage/posix - libgfapi Client applications can exloit this fop by using glfs_zerofill introduced in libgfapi.FUSE support to this fop has not been added as there is no system call for this fop. Changes from previous version 3: * Removed redundant memory failure log messages Changes from previous version 2: * Rebased and fixed build error Changes from previous version 1: * Rebased for latest master TODO : * Add zerofill support to trace xlator * Expose zerofill capability as part of gluster volume info Here is a performance comparison of server offloaded zeofill vs zeroing out using repeated writes. [root@llmvm02 remote]# time ./offloaded aakash-test log 20 real 3m34.155s user 0m0.018s sys 0m0.040s [root@llmvm02 remote]# time ./manually aakash-test log 20 real 4m23.043s user 0m2.197s sys 0m14.457s [root@llmvm02 remote]# time ./offloaded aakash-test log 25; real 4m28.363s user 0m0.021s sys 0m0.025s [root@llmvm02 remote]# time ./manually aakash-test log 25 real 5m34.278s user 0m2.957s sys 0m18.808s The argument log is a file which we want to set for logging purpose and the third argument is size in GB . As we can see there is a performance improvement of around 20% with this fop. Change-Id: I081159f5f7edde0ddb78169fb4c21c776ec91a18 BUG: 1028673 Signed-off-by: Aakash Lal Das <aakash@linux.vnet.ibm.com> Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com> Reviewed-on: http://review.gluster.org/5327 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterfs: discard (hole punch) supportBrian Foster2013-06-131-0/+50
| | | | | | | | | | | | | | | | Add support for the DISCARD file operation. Discard punches a hole in a file in the provided range. Block de-allocation is implemented via fallocate() (as requested via fuse and passed on to the brick fs) but a separate fop is created within gluster to emphasize the fact that discard changes file data (the discarded region is replaced with zeroes) and must invalidate caches where appropriate. BUG: 963678 Change-Id: I34633a0bfff2187afeab4292a15f3cc9adf261af Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-on: http://review.gluster.org/5090 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* read-ahead: re-enable support for variable page sizeAnand Avati2013-02-201-1/+12
| | | | | | | | | | | | | | | | Support for variable size page-size was disabled with the introduction of fixed size iobufs. Since the introduction of variable sized iobufs there is no reason to not have configurable page-size in read-ahead. This patch enables necessary changes in the translator for configurable page-size. Change-Id: I677d70fef50641eb041269aca92a088b9d4961cc BUG: 764204 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/4526 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <raghavendra@gluster.com>
* Use proper libtool option -avoid-version instead of bogus -avoidversionAnand Avati2013-02-071-1/+1
| | | | | | | | | | Change-Id: I1c9541058c7d07786539a3266ca125a6a15287d8 BUG: 859835 Signed-off-by: Anand Avati <avati@redhat.com> Original-author: Kacper Kowalik (Xarthisius) <xarthisius.kk@gmail.com> Signed-off-by: Kacper Kowalik (Xarthisius) <xarthisius.kk@gmail.com> Reviewed-on: http://review.gluster.org/3967 Tested-by: Gluster Build System <jenkins@build.gluster.com>
* build: split CPPFLAGS from CFLAGSJeff Darcy2012-10-031-2/+3
| | | | | | | | | | | | | | | | | Automake provides a separate variable for preprocessor flags (*_CPPFLAGS). They are already uses in a few places, so make it consistent and use it everywhere. Note that cflags obtained from pkg-config often are cppflags, which is why LIBXML2_CFLAGS moves with into AM_CPPFLAGS, for example. Change-Id: I15feed1d18b2ca497371271c4b5876d5ec6289dd BUG: 862082 Original-author: Jan Engelhardt <jengelh@inai.de> Signed-off-by: Jan Engelhardt <jengelh@inai.de> Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/4029 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* build: remove useless explicit -fPIC -shared fromJeff Darcy2012-10-031-2/+2
| | | | | | | | | | | | | | | | | | | | CFLAGS libtool will automatically add "-fPIC" to the compiler command line as needed, so there is no need to specify it separately. "-shared" is normally a linker flag and has an odd effect when used with libtool --mode=compile, namely that it inhibits production of static objects. For that however, using AC_DISABLE_STATIC is a lot simpler. Change-Id: Ic4cba0fad18ffd985cf07f8d6951a976ae59a48f BUG: 862082 Original-author: Jan Engelhardt <jengelh@inai.de> Signed-off-by: Jan Engelhardt <jengelh@inai.de> Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/4027 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* build: remove -nostartfiles flagJeff Darcy2012-10-021-1/+1
| | | | | | | | | | | | | | | The "-nostartfiles" is a discouraged option and is documented to potentially result in undesired behavior. Since I see no reason why it should be in glusterfs, remove it. Change-Id: I56f2b08874516ebad91447b2583ca2fb776bb7ab BUG: 862082 Original-author: Jan Engelhardt <jengelh@inai.de> Signed-off-by: Jan Engelhardt <jengelh@inai.de> Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/4018 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* build: consolidate common compilation flags into one variableJeff Darcy2012-10-011-1/+1
| | | | | | | | | | | | | | | Some -D flags are present in all files, so collect them. This adds -D${GF_HOST_OS} to some compiler command lines, but this should not be a problem. Change-Id: I1aeb346143d4984c9cc4f2750c465ce09af1e6ca BUG: 862082 Original-author: Jan Engelhardt <jengelh@inai.de> Signed-off-by: Jan Engelhardt <jengelh@inai.de> Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/4013 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* performance/read-ahead: use pthread_mutex_trylock to hold mutex in statedumpsRaghavendra Bhat2012-08-011-11/+18
| | | | | | | | | | Change-Id: I4491c96fc7d9879ba9040dcda3700c81d99ba184 BUG: 843796 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.com/3766 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pranithk@gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* remove useless if-before-free (and free-like) functionsJim Meyering2012-07-131-3/+1
| | | | | | | | | | | | See comments in http://bugzilla.redhat.com/839925 for the code to perform this change. Signed-off-by: Jim Meyering <meyering@redhat.com> BUG: 839925 Change-Id: I10e4ecff16c3749fe17c2831c516737e08a3205a Reviewed-on: http://review.gluster.com/3661 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* license: dual license under GPLV2 and LGPLV3+Kaleb KEITHLEY2012-05-104-56/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Note that the license was not changed in any of the following: .../argp-standalone/... .../booster/... .../cli/... .../contrib/... .../extras/... .../glusterfsd/... .../glusterfs-hadoop/... .../mod_clusterfs/... .../scheduler/... .../swift/... The license was not changed in any of the non-building xlators. The license was not changed in any of the xlators that seemed — to me — to be clearly server-side only, e.g. protocol/server Note too that copyright was changed along with the license; I did not change the copyright in files where the license did not change. If you find any errors or ommissions please don't hesitate to let me know. The complete list of files with the license change is: libglusterfs/src/byte-order.h libglusterfs/src/call-stub.c libglusterfs/src/call-stub.h libglusterfs/src/checksum.c libglusterfs/src/checksum.h libglusterfs/src/circ-buff.c libglusterfs/src/circ-buff.h libglusterfs/src/common-utils.c libglusterfs/src/common-utils.h libglusterfs/src/compat-errno.c libglusterfs/src/compat-errno.h libglusterfs/src/compat.c libglusterfs/src/compat.h libglusterfs/src/daemon.c libglusterfs/src/daemon.h libglusterfs/src/defaults.c libglusterfs/src/defaults.h libglusterfs/src/dict.c libglusterfs/src/dict.h libglusterfs/src/event-history.c libglusterfs/src/event-history.h libglusterfs/src/event.c libglusterfs/src/event.h libglusterfs/src/fd-lk.c libglusterfs/src/fd-lk.h libglusterfs/src/fd.c libglusterfs/src/fd.h libglusterfs/src/gf-dirent.c libglusterfs/src/gf-dirent.h libglusterfs/src/globals.c libglusterfs/src/globals.h libglusterfs/src/glusterfs.h libglusterfs/src/graph-print.c libglusterfs/src/graph-utils.h libglusterfs/src/graph.c libglusterfs/src/hashfn.c libglusterfs/src/hashfn.h libglusterfs/src/iatt.h libglusterfs/src/inode.c libglusterfs/src/inode.h libglusterfs/src/iobuf.c libglusterfs/src/iobuf.h libglusterfs/src/latency.c libglusterfs/src/latency.h libglusterfs/src/list.h libglusterfs/src/lkowner.h libglusterfs/src/locking.h libglusterfs/src/logging.c libglusterfs/src/logging.h libglusterfs/src/mem-pool.c libglusterfs/src/mem-pool.h libglusterfs/src/mem-types.h libglusterfs/src/options.c libglusterfs/src/options.h libglusterfs/src/rbthash.c libglusterfs/src/rbthash.h libglusterfs/src/run.c libglusterfs/src/run.h libglusterfs/src/scheduler.c libglusterfs/src/scheduler.h libglusterfs/src/stack.c libglusterfs/src/stack.h libglusterfs/src/statedump.c libglusterfs/src/statedump.h libglusterfs/src/syncop.c libglusterfs/src/syncop.h libglusterfs/src/syscall.c libglusterfs/src/syscall.h libglusterfs/src/timer.c libglusterfs/src/timer.h libglusterfs/src/trie.c libglusterfs/src/trie.h libglusterfs/src/xlator.c libglusterfs/src/xlator.h libglusterfsclient/src/libglusterfsclient-dentry.c libglusterfsclient/src/libglusterfsclient-internals.h libglusterfsclient/src/libglusterfsclient.c libglusterfsclient/src/libglusterfsclient.h rpc/rpc-lib/src/auth-glusterfs.c rpc/rpc-lib/src/auth-null.c rpc/rpc-lib/src/auth-unix.c rpc/rpc-lib/src/protocol-common.h rpc/rpc-lib/src/rpc-clnt.c rpc/rpc-lib/src/rpc-clnt.h rpc/rpc-lib/src/rpc-transport.c rpc/rpc-lib/src/rpc-transport.h rpc/rpc-lib/src/rpcsvc-auth.c rpc/rpc-lib/src/rpcsvc-common.h rpc/rpc-lib/src/rpcsvc.c rpc/rpc-lib/src/rpcsvc.h rpc/rpc-lib/src/xdr-common.h rpc/rpc-lib/src/xdr-rpc.c rpc/rpc-lib/src/xdr-rpc.h rpc/rpc-lib/src/xdr-rpcclnt.c rpc/rpc-lib/src/xdr-rpcclnt.h rpc/rpc-transport/rdma/src/name.c rpc/rpc-transport/rdma/src/name.h rpc/rpc-transport/rdma/src/rdma.c rpc/rpc-transport/rdma/src/rdma.h rpc/rpc-transport/socket/src/name.c rpc/rpc-transport/socket/src/name.h rpc/rpc-transport/socket/src/socket.c rpc/rpc-transport/socket/src/socket.h xlators/cluster/afr/src/afr-common.c xlators/cluster/afr/src/afr-dir-read.c xlators/cluster/afr/src/afr-dir-read.h xlators/cluster/afr/src/afr-dir-write.c xlators/cluster/afr/src/afr-dir-write.h xlators/cluster/afr/src/afr-inode-read.c xlators/cluster/afr/src/afr-inode-read.h xlators/cluster/afr/src/afr-inode-write.c xlators/cluster/afr/src/afr-inode-write.h xlators/cluster/afr/src/afr-lk-common.c xlators/cluster/afr/src/afr-mem-types.h xlators/cluster/afr/src/afr-open.c xlators/cluster/afr/src/afr-self-heal-algorithm.c xlators/cluster/afr/src/afr-self-heal-algorithm.h xlators/cluster/afr/src/afr-self-heal-common.c xlators/cluster/afr/src/afr-self-heal-common.h xlators/cluster/afr/src/afr-self-heal-data.c xlators/cluster/afr/src/afr-self-heal-entry.c xlators/cluster/afr/src/afr-self-heal-metadata.c xlators/cluster/afr/src/afr-self-heal.h xlators/cluster/afr/src/afr-self-heald.c xlators/cluster/afr/src/afr-self-heald.h xlators/cluster/afr/src/afr-transaction.c xlators/cluster/afr/src/afr-transaction.h xlators/cluster/afr/src/afr.c xlators/cluster/afr/src/afr.h xlators/cluster/afr/src/pump.c xlators/cluster/afr/src/pump.h xlators/cluster/dht/src/dht-common.c xlators/cluster/dht/src/dht-common.h xlators/cluster/dht/src/dht-diskusage.c xlators/cluster/dht/src/dht-hashfn.c xlators/cluster/dht/src/dht-helper.c xlators/cluster/dht/src/dht-inode-read.c xlators/cluster/dht/src/dht-inode-write.c xlators/cluster/dht/src/dht-layout.c xlators/cluster/dht/src/dht-linkfile.c xlators/cluster/dht/src/dht-mem-types.h xlators/cluster/dht/src/dht-rebalance.c xlators/cluster/dht/src/dht-rename.c xlators/cluster/dht/src/dht-selfheal.c xlators/cluster/dht/src/dht.c xlators/cluster/dht/src/nufa.c xlators/cluster/dht/src/switch.c xlators/cluster/stripe/src/stripe-helpers.c xlators/cluster/stripe/src/stripe-mem-types.h xlators/cluster/stripe/src/stripe.c xlators/cluster/stripe/src/stripe.h xlators/features/index/src/index-mem-types.h ¹ xlators/features/index/src/index.c ¹ xlators/features/index/src/index.h ¹ xlators/performance/io-cache/src/io-cache.c xlators/performance/io-cache/src/io-cache.h xlators/performance/io-cache/src/ioc-inode.c xlators/performance/io-cache/src/ioc-mem-types.h xlators/performance/io-cache/src/page.c xlators/performance/io-threads/src/io-threads.c xlators/performance/io-threads/src/io-threads.h xlators/performance/io-threads/src/iot-mem-types.h xlators/performance/md-cache/src/md-cache-mem-types.h xlators/performance/md-cache/src/md-cache.c xlators/performance/quick-read/src/quick-read-mem-types.h xlators/performance/quick-read/src/quick-read.c xlators/performance/quick-read/src/quick-read.h xlators/performance/read-ahead/src/page.c xlators/performance/read-ahead/src/read-ahead-mem-types.h xlators/performance/read-ahead/src/read-ahead.c xlators/performance/read-ahead/src/read-ahead.h xlators/performance/symlink-cache/src/symlink-cache.c xlators/performance/write-behind/src/write-behind-mem-types.h xlators/performance/write-behind/src/write-behind.c xlators/protocol/auth/addr/src/addr.c ¹ xlators/protocol/auth/login/src/login.c ¹ xlators/protocol/client/src/client-callback.c xlators/protocol/client/src/client-handshake.c xlators/protocol/client/src/client-helpers.c xlators/protocol/client/src/client-lk.c xlators/protocol/client/src/client-mem-types.h xlators/protocol/client/src/client.c xlators/protocol/client/src/client.h xlators/protocol/client/src/client3_1-fops.c ¹ Copyright only, license reverted to original Change-Id: If560e826c61b6b26f8b9af7bed6e4bcbaeba31a8 BUG: 820551 Signed-off-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.com/3304 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vijay@gluster.com>
* core: adding extra data for fopsAmar Tumballi2012-03-222-55/+57
| | | | | | | | | | | | | with this change, the xlator APIs will have a dictionary as extra argument, which is passed between all the layers. This can be utilized for overloading in some of the operations. Change-Id: I58a8186b3ef647650280e63f3e5e9b9de7827b40 Signed-off-by: Amar Tumballi <amarts@redhat.com> BUG: 782265 Reviewed-on: http://review.gluster.com/2960 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* performance/read-ahead: destroy pages which survived from being flushedRaghavendra G2012-03-203-2/+10
| | | | | | | | | | | | | in flush_region because of frames waiting on them, after those frames are served. Change-Id: Ic8402f3da32058a1a11e62124b598b0ec3befeff BUG: 767948 Signed-off-by: Raghavendra G <raghavendra@gluster.com> Reviewed-on: http://review.gluster.com/2982 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-by: Vijay Bellur <vijay@gluster.com>
* performance/read-ahead: cleanup xlator private data completely in fini.Raghavendra G2012-03-141-2/+5
| | | | | | | | | | Change-Id: I3bb143036557d7d3844dc825f6870140e414f85a BUG: 767862 Signed-off-by: Raghavendra G <raghavendra@gluster.com> Reviewed-on: http://review.gluster.com/792 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Vijay Bellur <vijay@gluster.com>
* mempool: adjustments in pool sizesAmar Tumballi2012-02-221-1/+1
| | | | | | | | | | | | | | | | | * while creating 'rpc_clnt', the caller knows what would be the ideal load on it, so an extra argument to set some pool sizes * while creating 'rpcsvc', the caller knows what would be the ideal load of it, so an extra argument to set request pool size * cli memory footprint is reduced Change-Id: Ie245216525b450e3373ef55b654b4cd30741347f Signed-off-by: Amar Tumballi <amarts@redhat.com> BUG: 765336 Reviewed-on: http://review.gluster.com/2784 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vijay@gluster.com>
* core: utilize mempool for frame->local allocationsAmar Tumballi2012-02-213-5/+13
| | | | | | | | | | | | | | | in each translator, which uses 'frame->local', we are using GF_CALLOC/GF_FREE, which would be costly considering the number of allocation happening in a lifetime of 'fop'. It would be good to utilize the mem pool framework for xlator's local structures, so there is no allocation overhead. Change-Id: Ida6e65039a24d9c219b380aa1c3559f36046dc94 Signed-off-by: Amar Tumballi <amar@gluster.com> BUG: 765336 Reviewed-on: http://review.gluster.com/2772 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* core: add an extra flag to readv()/writev() APIAmar Tumballi2012-02-142-8/+6
| | | | | | | | | | | | needed to implement a proper handling of open flag alterations using fcntl() on fd. Change-Id: Ic280d5db6f1dc0418d5c439abb8db1d3ac21ced0 Signed-off-by: Amar Tumballi <amar@gluster.com> BUG: 782265 Reviewed-on: http://review.gluster.com/2723 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* read-ahead: add performance.read-ahead--page-count option to 'volume set' ↵Kaushik BV2012-02-031-42/+25
| | | | | | | | | | | | | framework Change-Id: I727be1ae2e3da1816afa52fc9555269aa07c39c1 BUG: 783379 Signed-off-by: Kaushik BV <kbudiger@redhat.com> Reviewed-on: http://review.gluster.com/2700 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-by: Amar Tumballi <amar@gluster.com> Reviewed-by: Vijay Bellur <vijay@gluster.com>
* Fix race between read-ahead and write.Jeff Darcy2012-01-303-26/+68
| | | | | | | | | Change-Id: I0ed1aca585733302b5e3840f392849e12f0b0f0d BUG: 783313 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.com/2666 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@gluster.com>
* core: GFID filehandle based backend and anonymous FDsAnand Avati2012-01-201-57/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. What -------- This change introduces an infrastructure change in the filesystem which lets filesystem operation address objects (inodes) just by its GFID. Thus far GFID has been a unique identifier of a user-visible inode. But in terms of addressability the only mechanism thus far has been the backend filesystem path, which could be derived from the GFID only if it was cached in the inode table along with the entire set of dentry ancestry leading up to the root. This change essentially decouples addressability from the namespace. It is no more necessary to be aware of the parent directory to address a file or directory. 2. Why ------- The biggest use case for such a feature is NFS for generating persistent filehandles. So far the technique for generating filehandles in NFS has been to encode path components so that the appropriate inode_t can be repopulated into the inode table by means of a recursive lookup of each component top-down. Another use case is the ability to perform more intelligent self-healing and rebalancing of inodes with hardlinks and also to detect renames. A derived feature from GFID filehandles is anonymous FDs. An anonymous FD is an internal USABLE "fd_t" which does not map to a user opened file descriptor or to an internal ->open()'d fd. The ability to address a file by the GFID eliminates the need to have a persistent ->open()'d fd for the purpose of avoiding the namespace. This improves NFS read/write performance significantly eliminating open/close calls and also fixes some of today's limitations (like keeping an FD open longer than necessary resulting in disk space leakage) 3. How ------- At each storage/posix translator level, every file is hardlinked inside a hidden .glusterfs directory (under the top level export) with the name as the ascii-encoded standard UUID format string. For reasons of performance and scalability there is a two-tier classification of those hardlinks under directories with the initial parts of the UUID string as the directory names. For directories (which cannot be hardlinked), the approach is to use a symlink which dereferences the parent GFID path along with basename of the directory. The parent GFID dereference will in turn be a dereference of the grandparent with the parent's basename, and so on recursively up to the root export. 4. Development --------------- 4a. To leverage the ability to address an inode by its GFID, the technique is to perform a "nameless lookup". This means, to populate a loc_t structure as: loc_t { pargfid: NULL parent: NULL name: NULL path: NULL gfid: GFID to be looked up [out parameter] inode: inode_new () result [in parameter] } and performing such lookup will return in its callback an inode_t populated with the right contexts and a struct iatt which can be used to perform an inode_link () on the inode (without a parent and basename). The inode will now be hashed and linked in the inode table and findable via inode_find(). A fundamental change moving forward is that the primary fields in a loc_t structure are now going to be (pargfid, name) and (gfid) depending on the kind of FOP. So far path had been the primary field for operations. The remaining fields only serve as hints/helpers. 4b. If read/write is to be performed on an inode_t, the approach so far has been to: fd_create(), STACK_WIND(open, fd), fd_bind (in callback) and then perform STACK_WIND(read, fd) etc. With anonymous fds now you can do fd_anonymous (inode), STACK_WIND (read, fd). This results in great boost in performance in the inbuilt NFS server. 5. Misc ------- The inode_ctx_put[2] has been renamed to inode_ctx_set[2] to be consistent with the rest of the codebase. Change-Id: Ie4629edf6bd32a595f4d7f01e90c0a01f16fb12f BUG: 781318 Reviewed-on: http://review.gluster.com/669 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@gluster.com>
* glusterfs: An effort to fix all the spell mistakes and typoHarshavardhana2011-11-161-1/+1
| | | | | | | | | | | | | | | in the entire glusterfs codebase. This patch fixes many of spell mistakes and typo in the entire glusterfs codebase and all supported modules. Change-Id: I83238a41aa08118df3cf4d1d605505dd3cda35a1 BUG: 3809 Signed-off-by: Harshavardhana <fharshav@redhat.com> Reviewed-on: http://review.gluster.com/731 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amar@gluster.com> Reviewed-by: Vijay Bellur <vijay@gluster.com>
* statedump: do not print the inode number in the statedumpRaghavendra Bhat2011-10-011-33/+19
| | | | | | | | | | | | | Since gfid is used to uniquely identify a inode, in the statedump printing inode number is not necessary. Its suffecient if the gfid of the inode is printed. And do not print the the inodelks, entrylks and posixlks if the lock count is 0. Change-Id: Idac115fbce3a5684a0f02f8f5f20b194df8fb27f BUG: 3476 Reviewed-on: http://review.gluster.com/530 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amar@gluster.com>
* Change Copyright current yearPranith Kumar K2011-08-104-4/+4
| | | | | | | | Change-Id: I2d10f2be44f518f496427f257988f1858e888084 BUG: 3348 Reviewed-on: http://review.gluster.com/200 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@gluster.com>
* LICENSE: s/GNU Affero General Public/GNU General Public/Pranith Kumar K2011-08-064-12/+12
| | | | | | | | Change-Id: I3914467611e573cccee0d22df93920cf1b2eb79f BUG: 3348 Reviewed-on: http://review.gluster.com/182 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@gluster.com>
generated by cgit (git 2.34.1) at 2024-04-23 16:46:14 +0000