summaryrefslogtreecommitdiffstats
path: root/xlators/mgmt/glusterd/src/glusterd.c
Commit message (Collapse)AuthorAgeFilesLines
* glusterd: Fix gsyncd upgrade issueKotresh HR2016-07-151-2/+59
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/14898/ Problem: gluster upgrade is not generating new volfiles Cause: During upgrade, "glusterd --xlator-option *.upgrade=on -N" is run to generate new volfiles. It is run post 'glusterfs' rpm installation. The above command fails during upgrade if geo-replication is installed. This is because on glusterd start 'gsyncd' binary is called to configure geo-replication related stuff. Since 'glusterfs' rpm is installed prior to 'geo-rep' rpm, the 'gsyncd' binary used to glusterd upgrade command is of old version and hence it fails before generating new volfiles. Solution: Don't call geo-replication configure during upgrade/downgrade. Geo-replication configuration happens during start of glusterd after upgrade. Change-Id: Id58ea44ead9f69982f86fb68dc5b9ee3f6cd11a1 BUG: 1356426 Signed-off-by: Kotresh HR <khiremat@redhat.com> (cherry picked from commit 1b998788ece8c8b52657e8b9aae65d3279690c5b) Reviewed-on: http://review.gluster.org/14915 CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* glusterd/geo-rep: slave volume uuid to identify a geo-rep sessionSaravanakumar Arumugam2016-05-181-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: Currently, it is possible to create multiple geo-rep session from the Master host to Slave host(s), where Slave host(s) belonging to the same volume. For example: Consider Master Host M1 having volume tv1 and Slave volume tv2, which spans across two Slave hosts S1 and S2. Currently, it is possible to create geo-rep session from M1(tv1) to S1(tv2) as well as from M1(tv1) to S2(tv2). When the Slave Host is alone modified, it is identified as a new geo-rep session (as slave host and slave volume together are identifying Slave side). Also, it is possible to create both root and non-root geo-rep session between same Master volume and Slave volume. This should also be avoided. Solution: This multiple geo-rep session creation must be avoided and in order to avoid, use Slave volume uuid to identify a Slave. This way, we can identify whether a session is already created for the same Slave volume and avoid creating again (using different host). When the session creation is forced in the above scenario, rename the existing geo-rep session directory with new Slave Host mentioned. Change-Id: I9239759cbc0d15dad63c48b8cf62950bb687c7c8 BUG: 1335728 Signed-off-by: Saravanakumar Arumugam <sarumuga@redhat.com> Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/13111 Reviewed-by: Kotresh HR <khiremat@redhat.com> Tested-by: Kotresh HR <khiremat@redhat.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> (cherry picked from commit a9128cda34b1f696b717ba09fa0ac5a929be8969) Reviewed-on: http://review.gluster.org/14322 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* all: reduce "inline" usageKaleb S KEITHLEY2016-01-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | There are three kinds of inline functions: plain inline, extern inline, and static inline. All three have been removed from .c files, except those in "contrib" which aren't our problem. Inlines in .h files, which are overwhelmingly "static inline" already, have generally been left alone. Over time we should be able to "lower" these into .c files, but that has to be done in a case-by-case fashion requiring more manual effort. This part was easy to do automatically without (as far as I can tell) any ill effect. In the process, several pieces of dead code were flagged by the compiler, and were removed. backport of Change-Id: I56a5e614735c9e0a6ee420dab949eac22e25c155, http://review.gluster.org/11769, BUG: 1245331 Change-Id: Iba1efb0bc578ea4a5e9bf76b7bd93dc1be9eba44 BUG: 1283302 Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/12646 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* glusterd: register rpc notification for unix socketsvmallika2016-01-131-15/+2
| | | | | | | | | | | | | | | | | | | This is a backport of http://review.gluster.org/#/c/13174/ Previously only CLI was using unix socket to connect to glusterd, and there was no need to register rpc callback notifications. Now auxiliary mount process is started with unix socket option. So we need to register rpc notifications for unix sockets as well. Change-Id: Ie52fb97195d78e1fde43ee966174bc4274f68f7e BUG: 1296024 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/13181 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* Tiering: change in status for remove brick and rebalancehari gowtham2015-09-221-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | backport of : http://review.gluster.org/#/c/12149/ when we trigger a detach tier start on a tier vol, it shows in the volume status task as "remove brick" instead of "Detach tier" Status of volume: vol1 Gluster process TCP Port RDMA Port Online Pid ------------------------------------------------------------------------------ Hot Bricks: Brick 10.70.42.171:/data/gluster/hbr1 49154 0 Y 25098 Cold Bricks: Brick 10.70.42.171:/data/gluster/p1 49152 0 Y 25101 Brick 10.70.42.171:/data/gluster/p2 49153 0 Y 25112 NFS Server on localhost N/A N/A N N/A Task Status of Volume vol1 ------------------------------------------------------------------------------ Task : Tier migrate ID : e11d5a3d-b1ae-4c3f-8f95-b28993c60939 Status : in progress Status of volume: vol1 Gluster process TCP Port RDMA Port Online Pid ------------------------------------------------------------------------------ Hot Bricks: Brick 10.70.42.171:/data/gluster/hbr1 49154 0 Y 25098 Cold Bricks: Brick 10.70.42.171:/data/gluster/p1 49152 0 Y 25101 Brick 10.70.42.171:/data/gluster/p2 49153 0 Y 25112 NFS Server on localhost N/A N/A N N/A Task Status of Volume vol1 ------------------------------------------------------------------------------ Task : Detach tier ID : 76d700b1-5bbd-43ed-95fd-1640b2b4af31 Status : completed >Change-Id: I4bd3b340d4e700e8afed00e1478b8a8b54dfe2e2 >BUG: 1261837 >Signed-off-by: hari gowtham <hgowtham@redhat.com> >Signed-off-by: Hari Gowtham <hgowtham@redhat.com> >Reviewed-on: http://review.gluster.org/12149 >Tested-by: NetBSD Build System <jenkins@build.gluster.org> >Tested-by: Gluster Build System <jenkins@build.gluster.com> >Reviewed-by: Dan Lambright <dlambrig@redhat.com> >Tested-by: Dan Lambright <dlambrig@redhat.com> Change-Id: Ie0e994677a9277486a546e99da334bd4660b678b BUG: 1258340 Signed-off-by: Hari Gowtham <hgowtham@redhat.com> Reviewed-on: http://review.gluster.org/12203 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Tested-by: Dan Lambright <dlambrig@redhat.com>
* glusterd: use 2 epoll worker threads by defaultKrishnan Parthasarathi2015-08-101-0/+21
| | | | | | | | | | | | | | | | | The no. of epoll worker threads can be configured by adding the following option into glusterd.vol. option event-threads <NUM-OF-EPOLL_WORKERS> BUG: 1250809 Change-Id: I2a9e2d81c64beaf54872081f9ce45355cf4dfca7 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/11630 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> (cherry picked from commit 6b7bdcb02cf39199d3720c2471121d14df64c8ab) Reviewed-on: http://review.gluster.org/11847
* glusterd: initialize the daemon services on demandAtin Mukherjee2015-07-271-54/+13
| | | | | | | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/#/c/11488/ As of now all the daemon services are initialized at glusterD init path. Since socket file path of per node daemon demands the uuid of the node, MY_UUID macro is invoked as part of the initialization. The above flow breaks the usecases where a gluster image is built following a template could be Dockerfile, Vagrantfile or any kind of virtualization environment. This means bringing instances of this image would have same UUIDs for the node resulting in peer probe failure. Solution is to lazily initialize the services on demand. Change-Id: If7caa533026c83e98c7c7678bded67085d0bbc1e BUG: 1247012 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/11488 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Gaurav Kumar Garg <ggarg@redhat.com> Reviewed-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/11766
* rpc,server,glusterd: Init transport list for accepted transportKaushal M2015-07-261-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | GlusterD or a brick would crash when encrypted transport was enabled and an unencrypted client tried to connect to them. The crash occured when GlusterD/server tried to remove the transport from their xprt_list due to a DISCONNECT event. But as the client transport's list head wasn't inited, the process would crash when list_del was performed. Initing the client transports list head during acceptence, prevents this crash. Also, an extra check has been added to the GlusterD and Server notification handlers for client DISCONNECT events. The handlers will now first check if the client transport is a member of any list. GlusterD and Server DISCONNECT event handlers could be called without the ACCEPT handler, which adds the transport to the list, being called. This situation also occurs when an unencrypted client tries to establish a connection with an encrypted server. Change-Id: Icc24a08d60e978aaa1d3322e0cbed680dcbda2b4 BUG: 1246809 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/11692 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> (cherry picked from commit a909ccfa1b4cbf656c4608ef2124347851c492cb) Reviewed-on: http://review.gluster.org/11762
* glusterd: Fix management encryption issues with GlusterDKaushal M2015-07-131-8/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Backport for 01b82c6 from master Management encryption was enabled incorrectly in GlusterD leading to issues of cluster deadlocks. This has been fixed with this commit. The fix is in two parts, 1. Correctly enable encrytion for the TCP listener in GlusterD and re-enable own-threads for encrypted connections. Without this, GlusterD could try to esatblish the blocking SSL connects in the epoll thread, for eg. when handling friend updates, which could lead to cluster deadlocks. 2. Explicitly enable encryption for outgoing peer connections. Without enabling encryption explicitly for outgoing connections was causing SSL socket events to be handled in the epoll thread. Some events, like disconnects during peer detach, could lead to connection attempts to happen in the epoll thread, leading to deadlocks again. Change-Id: I438c2b43f7b1965c0e04d95c000144118d36272c BUG: 1241784 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/11610 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd/shared_storage: Use /var/lib/glusterd/ss_brick as shared storage's ↵Avra Sengupta2015-07-061-7/+3
| | | | | | | | | | | | | | | | | | | | | | | brick Backport of http://review.gluster.org/#/c/11533/ The brick path we use to create shared storage is /var/run/gluster/ss_brick. The problem with using this brick path is /var/run/gluster is a tmpfs and all the brick/shared storage data will be wiped off when the node restarts. Hence using /var/lib/glusterd/ss_brick as the brick path for shared storage volume as this brick and the shared storage volume is internally created by us (albeit on user's request), and contains only internal state data and no user data. Change-Id: I808d1aa3e204a5d2022086d23bdbfdd44a2cfb1c BUG: 1230399 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/11534 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* glusterd: Porting left out log messages to new frameworkNandaja Varma2015-06-261-29/+39
| | | | | | | | | | | | | | | | | This is a backport of http://review.gluster.org/11388 cherry-picked from commit 23c1e6dc0fa86c014e1a8b6aa5729675f6d69017 >Change-Id: I70d40ae3b5f49a21e1b93f82885cd58fa2723647 >BUG: 1235538 >Signed-off-by: Nandaja Varma <nandaja.varma@gmail.com> Change-Id: I70d40ae3b5f49a21e1b93f82885cd58fa2723647 BUG: 1217722 Signed-off-by: Nandaja Varma <nandaja.varma@gmail.com> Reviewed-on: http://review.gluster.org/11422 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Anand Nekkunti <anekkunt@redhat.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* rebalance,store,glusterd/glusterd: porting to new logging framework.Nandaja Varma2015-06-161-72/+136
| | | | | | | | | | | | Backport of http://review.gluster.org/#/c/9877/ Change-Id: I231b79e3414e60fe67cde577dd585cce83c8bfad BUG: 1217722 Signed-off-by: Nandaja Varma <nandaja.varma@gmail.com> Reviewed-on: http://review.gluster.org/11193 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd: Stop tcp/ip listeners during glusterd exitanand2015-06-161-3/+45
| | | | | | | | | | | | | | | | | | | | | | | | Problem : Because of race between exit thread and rpc thread causing the glusterd crash while glusterd exiting/stoping. Fix : Stop tcp/ip socket listeners in cleanup_and_exit to avoid new rpc events. Backport of : >Change-Id: Ie9280c8c9d7c350a176529375d861432f3de94ac >BUG: 1209461 >Signed-off-by: anand <anekkunt@redhat.com> >Reviewed-on: http://review.gluster.org/10197 >Reviewed-by: Atin Mukherjee <amukherj@redhat.com> >Tested-by: NetBSD Build System <jenkins@build.gluster.org> >Reviewed-by: Kaushal M <kaushal@redhat.com> Change-Id: Ibb3d3669e248af8c5284801d7f18c6ee26fe2ef3 BUG: 1230026 Reviewed-on: http://review.gluster.org/11154 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd/shared_storage: Provide a volume set option to create and mount the ↵Avra Sengupta2015-06-051-33/+74
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | shared storage Backport of http://review.gluster.org/#/c/10793/ Introducing a global volume set option(cluster.enable-shared-storage) which helps create and set-up the shared storage meta volume. gluster volume set all cluster.enable-shared-storage enable On enabling this option, the system analyzes the number of peers in the cluster, which are currently connected, and chooses three such peers(including the node the command is issued from). From these peers a volume(gluster_shared_storage) is created. Depending on the number of peers available the volume is either a replica 3 volume(if there are 3 connected peers), or a replica 2 volume(if there are 2 connected peers). "/var/run/gluster/ss_brick" serves as the brick path on each node for the shared storage volume. We also mount the shared storage at "/var/run/gluster/shared_storage" on all the nodes in the cluster as part of enabling this option. If there is only one node in the cluster, or only one node is up then the command will fail Once the volume is created, and mounted the maintainance of the volume like adding-bricks, removing bricks etc., is expected to be the onus of the user. On disabling the option, we provide the user a warning, and on affirmation from the user we stop the shared storage volume, and unmount it from all the nodes in the cluster. gluster volume set all cluster.enable-shared-storage disable Change-Id: Idd92d67b93f444244f99ede9f634ef18d2945dbc BUG: 1228181 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/11086 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com>
* libglusterfs: Implementation of sync lock as recursive lock to avoid crash.anand2015-04-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Problem : In glusterd,we are using big lock which is implemented based on sync task frame work for thread synchronization and rcu lock for data consistency. sync task frame work swap the threads if there is no worker poll threads available,due to this rcu lock and rcu unlock was happening in different threads (urcu-bp will not allow this),resulting into glusterd crash. fix : To avoid releasing the sync lock(big lock) in between rcu critical section,implemented sync lock as recursive lock. More details: link : http://www.spinics.net/lists/gluster-devel/msg14632.html Change-Id: I2b56c1caf3f0470f219b1adcaf62cce29cdc6b88 BUG: 1216942 Signed-off-by: anand <anekkunt@redhat.com> Reviewed-on: http://review.gluster.org/10285 Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System Reviewed-by: Vijay Bellur <vbellur@redhat.com> (cherry picked from commit ada6b3a8800867934af57a57d5312f5a5d8374f0) Reviewed-on: http://review.gluster.org/10432 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: Store ping-timeout in glusterd conf in memoryAtin Mukherjee2015-04-141-0/+5
| | | | | | | | | | | | | As of now glusterd_conf_t's ping-timeout was of no use and hence statedump was not reflecting correct ping-timeout value configured in glusterd.vol Change-Id: I76ba7b721264565751538c7fcdcb801a28317581 BUG: 1210627 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/10191 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* build: make contrib/uuid dependency optionalNiels de Vos2015-04-101-1/+1
| | | | | | | | | | | | | | | | | | | On Linux systems we should use the libuuid from the distribution and not bundle and statically link the contrib/uuid/ bits. libglusterfs/src/compat-uuid.h has been introduced and should become an abstraction layer for different UUID APIs. Non-Linux operating systems should implement their compatibility layer there. Once all operating systems have an implementation in compat-uuid.h, we can remove contrib/uuid/ from the repository completely. Change-Id: I345e5357644be2521685e00358bb8c83c4ea0577 BUG: 1206587 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/10129 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Avoid conflict between contrib/uuid and system uuidEmmanuel Dreyfus2015-04-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | glusterfs relies on Linux uuid implementation, which API is incompatible with most other systems's uuid. As a result, libglusterfs has to embed contrib/uuid, which is the Linux implementation, on non Linux systems. This implementation is incompatible with systtem's built in, but the symbols have the same names. Usually this is not a problem because when we link with -lglusterfs, libc's symbols are trumped. However there is a problem when a program not linked with -lglusterfs will dlopen() glusterfs component. In such a case, libc's uuid implementation is already loaded in the calling program, and it will be used instead of libglusterfs's implementation, causing crashes. A possible workaround is to use pre-load libglusterfs in the calling program (using LD_PRELOAD on NetBSD for instance), but such a mechanism is not portable, nor is it flexible. A much better approach is to rename libglusterfs's uuid_* functions to gf_uuid_* to avoid any possible conflict. This is what this change attempts. BUG: 1206587 Change-Id: I9ccd3e13afed1c7fc18508e92c7beb0f5d49f31a Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/10017 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* geo-rep: Copy geo-rep hook-script during source installKotresh HR2015-04-021-9/+10
| | | | | | | | | | | | | | | | | The hook-script S56glusterd-geo-rep-create-post.sh was not copying to glusterd working directory when geo-rep is installed through source. Hence the geo-rep create fails unless the script is manually copied. This patch addresses the issue by copying the hook-script during make install. Change-Id: I185a877ed720e8300f0e888ab481d0c8c23bf815 BUG: 1207201 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/10051 Reviewed-by: Aravinda VK <avishwan@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* geo-rep: Add support for aclsKotresh HR2015-03-301-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for ACLS. When it sees SETXATTR in Changelog, it adds the file to data queue. rsync/tar+ssh will take care of syncing ACLS. User set ACLS will be synced to Slave. This requires "system.posix_acl_access" to go through when client-pid is equal GF_CLIENT_PID_GSYNCD in fuse layer. New config interface is introduced, sync-acls Which can be set using geo-rep config(Default is True) gluster volume geo-replication <VOLUME> <SLAVEHOST>::<SLAVEVOL> \ config sync-acls false Change-Id: I7eb3523fa72b8fed830efc98138891244e830d65 BUG: 1187021 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/10001 Reviewed-by: Aravinda VK <avishwan@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: Venky Shankar <vshankar@redhat.com>
* glusterd: clean up global xaction_peer occurancesAtin Mukherjee2015-03-261-1/+0
| | | | | | | | | | | | | | With http://review.gluster.org/#/c/9972/ there is no more need to maintain xaction_peers in glusterd_conf_t. This patch cleans up code for all the occurances of xaction_peers. Change-Id: I4fbf2df0fa9b8a8751029be36be7f76f6464cc76 BUG: 1204727 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/9980 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* cli/glusterd: CLI interface for BitRot detectionVenky Shankar2015-03-241-0/+17
| | | | | | | | | | | | | | | | * BitRot enable/disable CLI per volume * Volfile generation for Scrubber * Relevant glusterd infrastructure Change-Id: I1212af63f93ecc52b22ee6da920e1664f66a1e39 BUG: 1170075 Original-Author: Raghavendra Bhat <raghavendra@redhat.com> Original-Author: Venky Shankar <vshankar@redhat.com> Original-Author: Gaurav Kumar Garg <ggarg@redhat.com> Original-Author: Anand Nekkunti <anekkunt@redhat.com> Reviewed-on: http://review.gluster.org/9986 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* mgmt/glusterd: generate volfile for BitDVenky Shankar2015-03-241-0/+20
| | | | | | | | | | | | | | * Implement the skeleton of bit-rot xlator. Original-Author: Raghavendra Bhat <raghavendra@redhat.com> Signed-off-by: Venky Shankar <vshankar@redhat.com> Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> Signed-off-by: Anand Nekkunti <anekkunt@redhat.com> Change-Id: If33218bdc694f5f09cb7b8097c4fdb74d7a23b2d BUG: 1170075 Reviewed-on: http://review.gluster.org/9710 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: Replace libglusterfs lists with liburcu listsKaushal M2015-03-031-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch replaces usage of the libglusterfs lists data structures and API in glusterd with the lists data structures and API from liburcu. The liburcu data structes and APIs are a drop-in replacement for libglusterfs lists. All usages have been changed to keep the code consistent, and free from confusion. NOTE: glusterd_conf_t->xprt_list still uses the libglusterfs data structures and API, as it holds rpc_transport_t objects, which is not a part of glusterd and is not being changed in this patch. This change was developed on the git branch at [1]. This commit is a combination of the following commits on the development branch. 6dac576 Replace libglusterfs lists with liburcu lists a51b5ab Fix compilation issues d98a06f Fix merge issues a5d918e Remove merge remnant 1cca113 More style cleanup 1917be3 Address review comments on 9624/1 8d10f13 Use cds_lists for glusterd_svc_t 524ad5d Add rculist header in glusterd-conn-helper.c 646f294 glusterd: add list_add_order API honouring rcu [1]: https://github.com/kshlm/glusterfs/tree/urcu Change-Id: Ic613c5b6e496a677b9d3de15fc042a0492109fb0 BUG: 1191030 Signed-off-by: Kaushal M <kaushal@redhat.com> Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/9624 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Gaurav Kumar Garg <ggarg@redhat.com> Reviewed-by: Anand Nekkunti <anekkunt@redhat.com>
* glusterd: nfs,shd,quotad,snapd daemons refactoringAtin Mukherjee2015-02-201-9/+66
| | | | | | | | | | | | | This patch ports nfs, shd, quotad & snapd with the approach suggested in http://www.gluster.org/pipermail/gluster-devel/2014-December/043180.html Change-Id: I4ea5b38793f87fc85cc9d2cf873727351dedffd2 BUG: 1191486 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/9428 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Nekkunti <anekkunt@redhat.com>
* rdma: reduce log level from E to WMohammed Rafi KC2015-02-171-0/+22
| | | | | | | | | | | | | | glusterd process, when try to initialize default vol file, will always through an error if there is no rdma device. Changing the log levels and log messages to more appropriately. Change-Id: I75b919581c6738446dd2d5bddb7b7658a91efcf4 BUG: 1188232 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/9559 Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com>
* glusterd/geo-rep: Allow replace/remove brick if geo-rep is stopped.Kotresh HR2015-02-161-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Replace brick: If geo-replication was configured on a volume, replace brick used to fail. This patch allows replace brick to go through if all geo-rep sessions corresponding to that volume is stopped. Remove brick: There was no check for geo-replication for remove brick. Enforce 'remove brick commit' to fail if geo-rep session corresponding to volume is running. Allow 'remove brick commit' only if all of the geo-rep sessions corresponding to that volume is stopped. Code is re-organized for better readability. Change-Id: I02282c2764d8b81e319489c977847e6e437511a4 BUG: 1179638 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/9402 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Aravinda VK <avishwan@redhat.com> Reviewed-by: ajeet jha <ajha@redhat.com> Reviewed-by: Avra Sengupta <asengupt@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* rpc: initialise transport's list on creationKrishnan Parthasarathi2015-01-151-1/+0
| | | | | | | | | | | | | | Initialising the transport's list, meant to hold clients connected to it, on the first connection event is prone to race, especially with the introduction of multi-threaded event layer. BUG: 1181203 Change-Id: I6a20686a2012c1f49a279cc9cd55a03b8c7615fc Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/9413 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com>
* glusterd: Move statedump utils into a new file.Krishnan Parthasarathi2014-12-281-222/+1
| | | | | | | | | Change-Id: I1bf26c9d294e95f7b82cfc7a96f9d5575f5e0362 BUG: 1176770 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/9313 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd: coverity fix for overrun in glusterd_stop_uds_listenerAtin Mukherjee2014-12-281-5/+5
| | | | | | | | | | | | CID: 1260432 Change-Id: I6845bc4c231b53428419a5a2ad0c78ea9da31058 BUG: 1093692 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/9338 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* glusterd: fix unix domain notify fnKrishnan Parthasarathi2014-12-231-2/+11
| | | | | | | | | | | ... and unlink the 'right' socket file Change-Id: Id12ee8c622914555b7933104e13b43b3b31b5d19 BUG: 1176770 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/9315 Reviewed-by: Kaushal M <kaushal@redhat.com> Tested-by: Kaushal M <kaushal@redhat.com>
* glusterd: Coverity fix for string_overflow overrunGauravKumarGarg2014-12-081-2/+2
| | | | | | | | | | | | | | | | | | | | In function glusterd_dump_peer() it is copying "input_key" into "key" buffer without checking the length which might cause string_overflow overrun. Similar problem with other coverity issue. With this fix it will copy "input_key" into "key" buffer by maximum length of buffer. Coverity CID: 1256171 Coverity CID: 1256172 Coverity CID: 1256174 Change-Id: I4e092309d9503bd79ff82cf83ed5e8d758743453 BUG: 1093692 Signed-off-by: Gaurav Kumar Garg ggarg <ggarg@redhat.com> Reviewed-on: http://review.gluster.org/9208 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* cli: .cmd_log_history should not be hiddenAtin Mukherjee2014-11-241-1/+1
| | | | | | | | | Change-Id: I4513a2c260530855e09be64083e9344108c7a6c0 BUG: 1165996 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/9150 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* glusterd: statedump supportAtin Mukherjee2014-10-151-4/+219
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Although glusterd currently has statedump support but it doesn't dump its context information. Implementing glusterd_dump_priv function to export per-node glusterd information would be useful for debugging bugs. Once implemented, we could enhance sos-report to fetch this information. This would potentially reduce our time to root cause and data needed for debugability can be dumped gradually. Following is the main items of the dump list targeted in this patch : * Supported max/min op-version and current op-version * Information about peer list * Information about peer list involved while a transaction is going on (xaction_peers) * option dictionary in glusterd_conf_t * mgmt_v3_lock in glusterd_conf_t * List of connected clients * uuid of glusterd * A section of rpc related information like live connections and their statistics There are couple of issues which were found during implementation and testing phase: - xaction_peers of glusterd_conf_t was not initialized in init because of which traversing through this list head was crashing when there was no active transaction - gf_free was not setting the typestr to NULL if the the alloc count becomes 0 for a mem-type earlier allocated. Change-Id: Ic9bce2d57682fc1771cd2bc6af0b7316ecbc761f BUG: 1139682 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/8665 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* snapview-server: register a callback with glusterd to get notificationsRaghavendra Bhat2014-09-081-0/+37
| | | | | | | | | | | | | | | * As of now snapview-server is polling (sending rpc requests to glusterd) to get the latest list of snapshots at some regular time intervals (non configurable). Instead of that register a callback with glusterd so that glusterd sends notifications to snapd whenever a snapshot is created/deleted and snapview-server can configure itself. Change-Id: I17a274fd2ab487d030678f0077feb2b0f35e5896 BUG: 1119628 Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-on: http://review.gluster.org/8150 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: Set the rlimit for Open FDs to higher valueVijaikumar M2014-09-031-0/+18
| | | | | | | | | | | | | | | | | | Default 'open FD limit' is 1024. As the number of volumes/bricks increases, brick-to-glusterd socket FDs also increases in glusterd and runs out of the limit. Solution is to set the 'Open FD' limit to higher value in glusterd Change-Id: Iaa60b2155df2fa5a0759e054bdebffbc09f63ec1 BUG: 1136352 Signed-off-by: Vijaikumar M <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/8578 Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* build: make GLUSTERD_WORKDIR rely on localstatedirHarshavardhana2014-08-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | - Break-way from '/var/lib/glusterd' hard-coded previously, instead rely on 'configure' value from 'localstatedir' - Provide 's/lib/db' as default working directory for gluster management daemon for BSD and Darwin based installations - loff_t is really off_t on Darwin - fix-off the warnings generated by clang on FreeBSD/Darwin - Now 'tests/*' use GLUSTERD_WORKDIR a common variable for all platforms. - Define proper environment for running tests, define correct PATH and LD_LIBRARY_PATH when running tests, so that the desired version of glusterfs is used, regardless where it is installed. (Thanks to manu@netbsd.org for this additional work) Change-Id: I2339a0d9275de5939ccad3e52b535598064a35e7 BUG: 1111774 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/8246 Tested-by: Gluster Build System <jenkins@build.gluster.com>
* cli/snapshot : Dont display the snapshot hard-limit, soft-limitSachin Pandit2014-07-241-12/+1
| | | | | | | | | | | | | | | | | | | | | | | | | and auto-delete value in gluster volume info. Problem : Even though snap-max-hard-limit, snap-max-soft-limit and auto-delete values were not set explicitly, It was getting showed in the output of gluster volume info. Solution : Check if the value is already present in dictionary (That means, it is set), If value is not present then consider the default value, NOTE : This patch doesn't solve the problem where the values which is set globally are being displayed in gluster volume info Change-Id: I61445b3d2a12eb68c38a19bea53b9051ad028050 BUG: 1113476 Signed-off-by: Sachin Pandit <spandit@redhat.com> Reviewed-on: http://review.gluster.org/8191 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Avra Sengupta <asengupt@redhat.com> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> Reviewed-by: Kaushal M <kaushal@redhat.com>
* socket/glusterd/client: enable SSL for managementJeff Darcy2014-07-101-5/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The feature is controlled by presence of the following file: /var/lib/glusterd/secure-access See the comment near the definition of SECURE_ACCESS_FILE in glusterfs.h for the rationale. With this enabled, the following rules apply to connections: UNIX-domain sockets never have SSL. Management-port sockets (both connecting and accepting, in daemons and CLI) have SSL based on presence of the file. Other IP sockets have SSL based on the existing client.ssl and server.ssl volume options. Transport multi-threading is explicitly turned off in glusterd (it would otherwise be turned on when SSL is) due to multi-threading issues. Tests have been elided to avoid risk of leaving a file which will cause all subsequent tests to run with management SSL still enabled. IMPLEMENTATION NOTE The implementation is a bit messy, and consists of two stages. First we decide whether to set the relevant fields in our context structure, based on presence of the sentinel file OR a command-line override. Later we decide whether a particular connection should actually use SSL, based on the context flags plus what kind of connection we're making[1] and what kind of daemon we're in[2]. [1] inbound, outbound to glusterd port, other outbound [2] glusterd, glusterfsd, other TESTING NOTE Instead of just running one special test for this feature, the ideal would be to run all tests with management SSL enabled. However, it would be inappropriate or premature to set up an optional feature in the patch itself. Therefore, the method of choice is to submit a separate patch on top, which modifies "cleanup" in include.rc to recreate the secure-access file and associated SSL certificate/key files before each test. Change-Id: I0e04d6d08163893e24ec8c031748c5c447d7f780 BUG: 1114604 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/8094 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: Use mkdir_p to create DEFAULT_WORKDIRHarshavardhana2014-06-241-1/+1
| | | | | | | | | | | | | On non-Linux platforms FSH(Filesystem Hierarchy Standard) is not followed 'create' the default expected directory. Change-Id: Ia55dc99aa398efb6d2d140985cbc0ae11bdc763c BUG: 1111774 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/8155 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Prashanth Pai <ppai@redhat.com> Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com>
* glusterd/snapshot : Store the global snapshot config limit in options.Sachin Pandit2014-06-111-3/+15
| | | | | | | | | | | | | | | | | | | | Problem : Initially we used to save the global config limit in glusterd.info, The problem with that approach was glusterd.info is local to a particular glusterd and hence is not synced during the handshake of glusterds. Solution : Store the global snapshot config in options, which is synced during handshake. Change-Id: I4c688bb4052a57df28aadba8581b14e2ddb510ef BUG: 1104642 Signed-off-by: Sachin Pandit <spandit@redhat.com> Reviewed-on: http://review.gluster.org/7971 Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* mgmt/glusterd: Allow mount/umount requests over AF_INETVijay Bellur2014-05-251-2/+2
| | | | | | | | | | | | | | | | Along with a simple naming convention change to avoid confusion as per below. s/gd_svc_cli_prog_ro/gd_svc_cli_trusted_progs/ s/gd_svc_cli_actors_ro/gd_svc_cli_trusted_actors/ Change-Id: Ibc73d88846636656f060a811f641f37a1a864615 BUG: 1077452 Original-Author: Vijay Bellur <vbellur@redhat.com> Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/7821 Reviewed-by: Kotresh HR <khiremat@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* glusterd: Disable ping-timer between glusterd and brick processVijaikumar M2014-05-191-4/+5
| | | | | | | | | | | | | | | | | | | | | | When there are too many IO happening, brick process epoll thread will be busy and fails to respond to the glusterd pick packet within 30sec. Also epoll thread can be blocked by a big-lock. Solution is to disable ping-timer by default and only enable where ever required Later when the epoll thread model changed and made lighter, we need to revert back this change. http://review.gluster.com/3842 is one such approach. Change-Id: I7f80ad3eb00f7d9c4d4527305932f7cf4920e73f BUG: 1097224 Signed-off-by: Vijaikumar M <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/7753 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd: On gaining quorum spawn_daemons in new threadKaushal M2014-05-121-26/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | During startup, if a glusterd has peers, it waits till quorum is obtained to spawn bricks and other services. If peers are not present, the daemons are started during glusterd' startup itself. The spawning of daemons as a quorum action was done without using a seperate thread, unlike the spawn on startup. Since, quotad was launched using the blocking runner_run api, this leads to the thread being blocked. The calling thread is almost always the epoll thread and this leads to a deadlock. The runner_run call blocks the epoll thread waiting for quotad to start, as a result glusterd cannot serve any requests. But the startup of quotad is blocked as it cannot fetch the volfile from glusterd. The fix for this is to launch the spawn daemons task in a seperate thread. This will free up the epoll thread and prevents the above deadlock from happening. Change-Id: Ife47b3591223cdfdfb2b4ea8dcd73e63f18e8749 BUG: 1095585 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/7703 Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* glusterd: Allow symlink parent for snap_mount_folderHarshavardhana2014-05-031-1/+1
| | | | | | | | | | | | If '/var' is a symlink which is on OSX, 'glusterd' initialization fails which is not necessary fix it. Change-Id: I83adc16cfc0e0deaa18acf74ba99299ba4a21d60 BUG: 1061685 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/7558 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* glusterd: Ping timer implmentationKrishnan Parthasarathi2014-04-291-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | This patch refactors the existing client ping timer implementation, and makes use of the common code for implementing both client ping timer and the glusterd ping timer. A new gluster rpc program for ping is introduced. The ping timer is only started for peers that have this new program. The deafult glusterd ping timeout is 30 seconds. It is configurable by setting the option 'ping-timeout' in glusterd.vol . Also, this patch introduces changes in the glusterd-handshake path. The client programs for a peer are now set in the callback of dump_versions, for both the older handshake and the newer op-version handshake. This is the only place in the handshake process where we know what programs a peer supports. Change-Id: I035815ac13449ca47080ecc3253c0a9afbe9016a BUG: 1038261 Signed-off-by: Vijaikumar M <vmallika@redhat.com> Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/5202 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* glusterd/snapshot-handshake: Perform handshake of missed_snaps_list.Avra Sengupta2014-04-251-0/+11
| | | | | | | | | | | | | | | | In a handshake, create a union of the missed_snap_lists of the two peers. If an entry is present, its no op. If an entry is pendng, and the peer entry is done, mark own entry as done. If an entry is done, and the peer ertry is pending, its a no-op. If its a new entry, add it. Change-Id: Idbfa49cc34871631ba8c7c56d915666311024887 BUG: 1061685 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/7453 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* build: MacOSX Porting fixesHarshavardhana2014-04-241-4/+5
| | | | | | | | | | | | | | | | | | | | | git@forge.gluster.org:~schafdog/glusterfs-core/osx-glusterfs Working functionality on MacOSX - GlusterD (management daemon) - GlusterCLI (management cli) - GlusterFS FUSE (using OSXFUSE) - GlusterNFS (without NLM - issues with rpc.statd) Change-Id: I20193d3f8904388e47344e523b3787dbeab044ac BUG: 1089172 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Signed-off-by: Dennis Schafroth <dennis@schafroth.com> Tested-by: Harshavardhana <harsha@harshavardhana.net> Tested-by: Dennis Schafroth <dennis@schafroth.com> Reviewed-on: http://review.gluster.org/7503 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* gluster: GlusterFS Volume Snapshot FeatureAvra Sengupta2014-04-111-2/+85
| | | | | | | | | | | | | | | | | | | | | | | | | This is the initial patch for the Snapshot feature. Current patch includes following features: * Snapshot create * Snapshot delete * Snapshot restore * Snapshot list * Snapshot info * Snapshot status * Snapshot config Change-Id: I2f46920c0d61c515f6a60e0f8b46fff886d9f6a9 BUG: 1061685 Signed-off-by: shishir gowda <sgowda@redhat.com> Signed-off-by: Sachin Pandit <spandit@redhat.com> Signed-off-by: Vijaikumar M <vmallika@redhat.com> Signed-off-by: Raghavendra Bhat <raghavendra@redhat.com> Signed-off-by: Rajesh Joseph <rjoseph@redhat.com> Signed-off-by: Joseph Fernandes <josferna@redhat.com> Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/7128 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glusterd/Vol-Locks : Moving globals into glusterd priv and code refactoringAvra Sengupta2014-02-141-2/+2
| | | | | | | | | | | | | | | | | | | | | | Moved globals(vol_lock and txn_opinfo dicts and global_txn_id) into glusterd priv Moved glusterd_op_send_cli_response() out of gd_unlock_op_phase as gd_unlock_op_phase and glusterd_clear_txn_opinfo should only be called if the txn id has been successfully generated. The cli resp should be sent irrespective of that. Changed log levels from ERROR to WARNING for some volume lock logs where the logs are expected and is not an error Added logs for better transparency of transaction ids. Change-Id: Ifac9b23aa9f1648c9ae252cfd3ac50bb2ed46728 BUG: 1011470 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/6976 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
generated by cgit (git 2.34.1) at 2024-04-16 17:21:50 +0000