summaryrefslogtreecommitdiffstats
path: root/libglusterfs/src
Commit message (Collapse)AuthorAgeFilesLines
* features/changelog: Don't modify 'pargfid' in 'resolve_pargfid_to_path'Kotresh HR2016-03-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/#/c/13845/ If 'changelog' is enabled and 'changelog.capture-del-path' option is on it calls 'resolve_pargfid_to_path' which modifies 'pargfid' sent by caller. 'changelog_unlink' calls this routine directly with 'loc->pargfid' resulting it being modified and point to root instead of actual pargfid. This is a nasty bug and could cause the deletion of entry on root directory instead on actual parent when 'loc->path' is not present. Hence this fix to make 'pargfid' a const pointer and 'resolve_pargfid' to work on copy of pargfid. Glusterfind session creation enables these options by default to capture deleted entry path in changelog. Thanks Pranith for root causing this. BUG: 1322552 Change-Id: I9f2bc44b5604b224462594c12b7d79e68198d693 Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/13861 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com>
* cluster/ec: Rebalance hangs during renameAshish Pandey2016-03-311-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: During the rename of a particular file (ec is holding blocking inodelk on the parent directory), if the rename of another file under the same directory comes. EC does not release the lock and goes ahead and renames the "new" file with the "already held lock". That causes rebalance process to be blocked on a lock which has been acquired by rename. Solution: While rename fop comes, ec takes blocking inodelk on old and new parent of the file. Before releasing, every lock held by ec, it waits for some "time" to see if that lock can be reused by the next fop. If within this "time" some other request comes, it releases this lock based on condition "lock count > 1" To get this "lock count" for rename fop, we have implemented "pl_rename" in feature/lock. Also, on ec side, changed the condition to release the lock based on the type of fop and old and new parent directories. master- http://review.gluster.org/#/c/13460/ Change-Id: I979dbab1185df962e8f305a6074ae1186ffe7db0 Bug: 1322299 Signed-off-by: Ashish Pandey <aspandey@redhat.com> Reviewed-on: http://review.gluster.org/13849 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* libglusterfs: open cmd_history log file with O_APPEND and O_WRONLYAtin Mukherjee2016-03-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 8fdfa0c introduced a fix to ensure cmd_history file is log rotated properly. However with this fix fdopen() is called with mode "a" on a fd which was not opened with O_WRONLY & O_APPEND resulting into a fdopen() failure. Fix is to open cmd_history.log file with O_CREATE|O_WRONLY|O_APPEND mode Backport of commit 207289621f6c5b75bdb80aa14ddaf72efd5eb9b1: > Change-Id: I75ef350560aa6d5435c78c5fd83adfde1a73bfc3 > BUG: 1286959 > Signed-off-by: Atin Mukherjee <amukherj@redhat.com> > Reviewed-on: http://review.gluster.org/13829 > Smoke: Gluster Build System <jenkins@build.gluster.com> > Reviewed-by: Niels de Vos <ndevos@redhat.com> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Change-Id: I75ef350560aa6d5435c78c5fd83adfde1a73bfc3 BUG: 1304963 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/13847 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* gfapi: Fix the crashes caused by global_xlator and THISPoornima G2016-03-304-5/+10
| | | | | | | | | | | | | | | | | | | | | | Issue: http://thread.gmane.org/gmane.comp.file-systems.gluster.devel/10922 The right fix for this is elaborate and intrusive, until it is in place, this patch provides a temperory fix. This fix is necessary, as without this libgfapi applications like qemu, samba, NFS ganesha are prone to crashes. This patch will be reverted completely, once the actual fix gets accepted. Credits: Rajesh Joseph, Raghavendra Talur, Anoop CS Back-port of: http://review.gluster.org/#/c/13784/ Change-Id: I8a8a0572bea0eec94ece6aa0d7afcf2f459b4a43 BUG: 1319989 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/13803 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anoop C S <anoopcs@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* libglusterfs: pass buffer size to gf_store_read_and_tokenize functionGaurav Kumar Garg2016-03-232-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is backport of: http://review.gluster.org/#/c/12346/ Previously if user set an option where length of key=value goes beyond PATH_MAX (4096) character then tokenzing the option at the time of reading configuration file will fail. This is because of the we was having restraction in fgets to read maximum of PATH_MAX (4096) length of character. Consequence of this is when user try to restart glusterd, after setting key=value length beyond PATH_MAX (4096) character, glusterd will not restart. With this fix instead of PATH_MAX, consumer of gf_store_read_and_tokenize function will decide the size of the buffer length. Cherry picked from commit 816ca94f5dd49f34f395caf501de3c71f0ba113d: >> Change-Id: I655a8ce982effdfff8f3e785ea31f543dbe39301 >> BUG: 1271150 >> Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> >> Reviewed-on: http://review.gluster.org/12346 >> Tested-by: NetBSD Build System <jenkins@build.gluster.org> >> Tested-by: Gluster Build System <jenkins@build.gluster.com> >> Reviewed-by: Anand Nekkunti <anekkunt@redhat.com> >> Reviewed-by: Niels de Vos <ndevos@redhat.com> Change-Id: I5b76e81a4ad31a286fb4298ba27f3230fba99ab4 BUG: 1319649 Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> Reviewed-on: http://review.gluster.org/13795 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com>
* glusterd / afr : Enable auto heal when replica count increasesAnuradha Talur2016-03-232-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/12451 In replicate volumes, when a brick is added to a replicate group, heal to the new brick should be triggered. Also, the new brick should not be considered as source for healing till it is up to date. Previously, extended attributes had to be set manually on the bricks for this to happen. This patch is part 1 patch to automate this process. >Change-Id: I29958448618372bfde23bf1dac5dd23dba1ad98f >BUG: 1276203 >Signed-off-by: Anuradha Talur <atalur@redhat.com> >Reviewed-on: http://review.gluster.org/12451 >Reviewed-by: Atin Mukherjee <amukherj@redhat.com> >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> >CentOS-regression: Gluster Build System <jenkins@build.gluster.com> >Reviewed-by: Ravishankar N <ravishankar@redhat.com> >Smoke: Gluster Build System <jenkins@build.gluster.com> Signed-off-by: Anuradha Talur <atalur@redhat.com> Conflicts: libglusterfs/src/globals.h xlators/mgmt/glusterd/src/glusterd-replace-brick.c Change-Id: Ica83592aab8edbe49e2bb9d8d4824cf5c76324b7 BUG: 1320020 Reviewed-on: http://review.gluster.org/13806 Smoke: Gluster Build System <jenkins@build.gluster.com> Tested-by: Anuradha Talur <atalur@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* glusterd: Bug fixes for IPv6 supportNithin D2016-03-212-11/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/#/c/11988/ Problem: Glusterd not working using ipv6 transport. The idea is with proper glusterd.vol configuration, 1. glusterd needs to listen on default port (240007) as IPv6 TCP listner. 2. Volume creation/deletion/mounting/add-bricks/delete-bricks/peer-probe needs to work using ipv6 addresses. 3. Bricks needs to listen on ipv6 addresses. All the above functionality is needed to say that glusterd supports ipv6 transport and this is broken. Fix: When "option transport.address-family inet6" option is present in glusterd.vol file, it is made sure that glusterd creates listeners using ipv6 sockets only and also the same information is saved inside brick volume files used by glusterfsd brick process when they are starting. Tests Run: Regression tests using ./run-tests.sh IPv4: Regression tests using ./run-tests.sh for release-3.7 branch verified by comparing with clean repo. IPv6: (Need to add the above mentioned config and also add an entry for "hostname ::1" in /etc/hosts) Started failing at ./tests/basic/glusterd/arbiter-volume-probe.t and ran successfully till here Change-Id: Idd7513aa2347ce0de2b1f68daeecce1b7a39a7af BUG: 1310445 Signed-off-by: Nithin D <nithind1988@yahoo.in> Reviewed-on: http://review.gluster.org/13787 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* cluster/ec: Provide an option to enable/disable eager lockAshish Pandey2016-03-201-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: If a fop takes lock, and completes its operation, it waits for 1 second before releasing the lock. However, If ec find any lock contention within this time period, it release the lock immediately before time expires. As we take lock on first brick, for few operations, like read, it might happen that discovery of lock contention might take long time and can degrades the performance. Solution: Provide an option to enable/disable eager lock. If eager lock is disabled, lock will be released as soon as fop completes. gluster v set <VOLUME NAME> disperse.eager-lock on gluster v set <VOLUME NAME> disperse.eager-lock off master- http://review.gluster.org/13605 Change-Id: I000985a787eba3c190fdcd5981dfbf04e64af166 BUG: 1318965 Signed-off-by: Ashish Pandey <aspandey@redhat.com> Reviewed-on: http://review.gluster.org/13773 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* fuse: Add a new mount option capabilityPoornima G2016-03-091-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Originally all security.* xattrs were forbidden if selinux is disabled, which was causing Samba's acl_xattr module to not work, as it would store the NTACL in security.NTACL. To fix this http://review.gluster.org/#/c/12826/ was sent, which forbid only security.selinux. This opened up a getxattr call on security.capability before every write fop and others. Capabilities can be used without selinux, hence if selinux is disabled, security.capability cannot be forbidden. Hence adding a new mount option called capability. Only when "--capability" or "--selinux" mount option is used, security.capability is sent to the brick, else it is forbidden. Backport of : http://review.gluster.org/#/c/13540/ & http://review.gluster.org/#/c/13653/ BUG: 1309462 Change-Id: Ib8d4f32d9f1458f4d71a05785f92b526aa7033ff Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/13626 Tested-by: Vijay Bellur <vbellur@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* features/shard: Return ENOTSUP for unsupported fallocate flagsKrutika Dhananjay2016-03-091-1/+4
| | | | | | | | | | | | | | | | Backport of: http://review.gluster.org/13523 Basis: http://lists.gnu.org/archive/html/qemu-devel/2016-02/msg05101.html Change-Id: I681eb4d0c43c635cf96a2deab0996dec7a255fe5 BUG: 1299712 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/13652 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Ravishankar N <ravishankar@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* cluster/ec: Mark self-heal fops as internalPranith Kumar K2016-03-041-1/+1
| | | | | | | | | | | | | | | | | | >Change-Id: I8ae7af266d3e00460f0cfdc9389a926e5f2fee36 >BUG: 1282761 >Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> >Reviewed-on: http://review.gluster.org/12598 >Tested-by: Gluster Build System <jenkins@build.gluster.com> >Tested-by: NetBSD Build System <jenkins@build.gluster.org> >Reviewed-by: Xavier Hernandez <xhernandez@datalab.es> BUG: 1283757 Change-Id: Ic20d4ee031265305db1a6ed2cf591ce94b7d0749 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/12668 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* inode: Retire the inodes from the lru list in inode_table_destroySoumya Koduri2016-02-281-3/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | Inodes from the lru list are not moved to purge list unless they are retired. Also process the lru list first to unset their parent as we need to unset their dentry entries (the ones which may not be unset during '__inode_passivate' as they were hashed) which in turn shall unref their parent inodes which could be in active list. These parent inodes when unref'ed may well again fall into lru list and if we are at the end of traversing the list, we may miss to delete/retire that entry. Hence traverse the lru list till it gets empty. This is backport of the below patch - http://review.gluster.org/13125 Change-Id: Ib7666e235e9b9644144a7c7933afb5e407e506ca BUG: 1311441 Signed-off-by: Soumya Koduri <skoduri@redhat.com> Reviewed-on: http://review.gluster.org/13125 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/13527 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* tier:delete the linkfile if data file creation failsMohammed Rafi KC2016-02-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If we are creating data file in a hot subvolume then we will create a linkfile in cold subvolume. Linkfile creation happens first. If linkfile creation was successful and data file creation failed, then linkfile in cold subvolume will become stale This patch will delete the linkfile as well, if data file creation fails Also this code duplicates dht_create to make tier_create backport of> >Change-Id: I377a90dad47f288e9576c7323b23cf694a91a7a3 >BUG: 1290677 >Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> >Reviewed-on: http://review.gluster.org/12948 >Reviewed-by: N Balachandran <nbalacha@redhat.com> >Tested-by: NetBSD Build System <jenkins@build.gluster.org> >Reviewed-by: Raghavendra G <rgowdapp@redhat.com> >Reviewed-by: Dan Lambright <dlambrig@redhat.com> >Tested-by: Dan Lambright <dlambrig@redhat.com> Change-Id: I3689e8ee387fb6731b4b3a7fe8f8190143482eaa BUG: 1295359 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/13161 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com>
* tier:unlink during migrationMohammed Rafi KC2016-02-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | files deleted during promotion were not deleting as the files are moving from hashed to non-hashed On deleting a file that is undergoing promotion, the unlink call is not sent to the dst file as the hashed subvol == cached subvol. This causes the file to reappear once the migration is complete. This patch also fixes a problem with stale linkfile deleting. Backport of> >Change-Id: I4b02a498218c9d8eeaa4556fa4219e91e7fa71e5 >BUG: 1282390 >Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> >Reviewed-on: http://review.gluster.org/12829 >Tested-by: NetBSD Build System <jenkins@build.gluster.org> >Tested-by: Gluster Build System <jenkins@build.gluster.com> >Reviewed-by: Dan Lambright <dlambrig@redhat.com> >Tested-by: Dan Lambright <dlambrig@redhat.com> (cherry picked from commit b5de382afa8c5777e455c7a376fc4f1f01d782d1) Change-Id: I951adb4d929926bcd646dd7574f7a2d41d57479d BUG: 1282388 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/12991 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com>
* fuse: send lookup if inode_ctx is not setMohammed Rafi KC2016-02-222-4/+17
| | | | | | | | | | | | | | | | | | | | | | | | | During resolving of an entry or inode, if inode ctx was not set, we will send a lookup. This patch also make sure that inode_ctx will be created after every inode_link Back port of> >Change-Id: I4211533ca96a51b89d9f010fc57133470e52dc11 >BUG: 1297311 >Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> >Reviewed-on: http://review.gluster.org/13225 >Reviewed-by: Dan Lambright <dlambrig@redhat.com> Change-Id: I53d7f77b5b9a9e095aeeccdd3605dcce7eade0b2 BUG: 1306131 Tested-by: Dan Lambright <dlambrig@redhat.com> Reviewed-on: http://review.gluster.org/13416 Smoke: Gluster Build System <jenkins@build.gluster.com> Tested-by: mohammed rafi kc <rkavunga@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com>
* libglusterfs: close & open cmd_history.log on log rotateGaurav Kumar Garg2016-02-192-2/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is backport of: http://review.gluster.org/#/c/12832/ Post log rotate, cmd_history.log is not refreshed (closed & opened back) due to which new commands still land up in the log rotated file. Fix is to close and open cmd_history.log file upon log rotation >> Change-Id: Ie6990c9d55b0afa544bc5c84de3db49ff4b1299b >> BUG: 1286959 >> Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> >> Reviewed-on: http://review.gluster.org/12832 >> Smoke: Gluster Build System <jenkins@build.gluster.com> >> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> >> Reviewed-by: Niels de Vos <ndevos@redhat.com> >> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> (cherry picked from commit 8fdfa0c17cf492f39e675f7502596754f6e5aeb4) Change-Id: Ie6990c9d55b0afa544bc5c84de3db49ff4b1299b BUG: 1304963 Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> Reviewed-on: http://review.gluster.org/13361 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* timer: fix race between gf_timer_call_cancel() and gf_timer_proc()Anand Avati2016-02-162-37/+18
| | | | | | | | | | | | | | | | | | | | | | | >Change-Id: Ie264d3d591352e4a8ddaa90ae2174d9c552396f1 >BUG: 1243187 >Signed-off-by: Anand Avati <avati@redhat.com> >Reviewed-on: http://review.gluster.org/6459 >Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> >Reviewed-by: Poornima G <pgurusid@redhat.com> >Tested-by: Gluster Build System <jenkins@build.gluster.com> >Reviewed-by: Niels de Vos <ndevos@redhat.com> >(cherry picked from commit ea90c92820ee0ca500345863cdfb5009d08b6ca7) Change-Id: I2bc136e7d676826428afbf57f5afe50e2238fd33 BUG: 1246121 Signed-off-by: Anand Avati <avati@redhat.com> Reviewed-on: http://review.gluster.org/11796 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* performance/write-behind: retry "failed syncs to backend"Raghavendra G2016-02-161-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. When sync fails, the cached-write is still preserved unless there is a flush/fsync waiting on it. 2. When a sync fails and there is a flush/fsync waiting on the cached-write, the cache is thrown away and no further retries will be made. In other words flush/fsync act as barriers for all the previous writes. The behaviour of fsync acting as a barrier is controlled by an option (see below for details). All previous writes are either successfully synced to backend or forgotten in case of an error. Without such barrier fop (especially flush which is issued prior to a close), we end up retrying for ever even after fd is closed. 3. If a fop is waiting on cached-write and syncing to backend fails, the waiting fop is failed. 4. sync failures when no fop is waiting are ignored and are not propagated to application. For eg., a. first attempt of sync of a cached-write w1 fails b. second attempt of sync of w1 succeeds If there are no fops dependent on w1 are issued b/w a and b, application won't know about failure encountered in a. 5. The effect of repeated sync failures is that, there will be no cache for future writes and they cannot be written behind. fsync as a barrier and resync of cached writes post fsync failure: ================================================================== Whether to keep retrying failed syncs post fsync is controlled by an option "resync-failed-syncs-after-fsync". By default, this option is set to "off". If sync of "cached-writes issued before fsync" (to backend) fails, this option configures whether to retry syncing them after fsync or forget them. If set to on, cached-writes are retried till a "flush" fop (or a successful sync) on sync failures. fsync itself is failed irrespective of the value of this option, when there is a sync failure of any cached-writes issued before fsync. Change-Id: I6097c0257bfb9ee5b1f616fbe6a0576ae9af369a Signed-off-by: Raghavendra G <rgowdapp@redhat.com> BUG: 1293534 Signed-off-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-on: http://review.gluster.org/13057 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* tier/gfdb : Round-Robin read of query filesJoseph Fernandes2016-02-143-32/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. Each brick on a host will get a separate query file. 2. While reading query record from these query files we read them in a Round-Robin manner. 3. When an error occurs during migration we rename it to query file with an time stamp and .err extension for better debugging. Backport of http://review.gluster.org/13293 > Change-Id: I27c4285d24fd695d2d5cbd9fd7db3879d277ecc8 > BUG: 1302772 > Signed-off-by: Joseph Fernandes <josferna@redhat.com> > Reviewed-on: http://review.gluster.org/13293 > Smoke: Gluster Build System <jenkins@build.gluster.com> > Tested-by: N Balachandran <nbalacha@redhat.com> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > Reviewed-by: Dan Lambright <dlambrig@redhat.com> > CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Change-Id: I9448f19c10a82fff9b1b3c9387c9026adc0742f1 BUG: 1306514 Signed-off-by: Joseph Fernandes <josferna@redhat.com> Reviewed-on: http://review.gluster.org/13427 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Joseph Fernandes Tested-by: Joseph Fernandes NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com>
* storage/posix: Implement .unlink directoryAshish Pandey2016-01-252-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: For EC volume, If a file descriptor is open and file has been unlinked, any further write on that fd will fail. When a write request comes, EC internally reads some blocks using anonymous fd. This read will fail as the file has already been unlinked. Solution: To solve this issue, we are using .unlink directory to keep track of unlinked file. If a file is to be unlinked while its fd is open, move this to .unlink directory and unlink it from .glusterfs and real path. Once all the fd will be closed, remove this entry form .unlink directory. master - http://review.gluster.org/#/c/12816/ Change-Id: I8344edb0d340bdb883dc46458c16edbc336916b9 BUG: 1291557 Signed-off-by: Ashish Pandey <aspandey@redhat.com> Reviewed-on: http://review.gluster.org/12968 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* protocol/server: Fix memory corruption during client-table-expand.Raghavendra G2016-01-191-0/+1
| | | | | | | | | | | | | | | | | | gf_client_clienttable_expand frees up old entries after expanding. So, cliententry should be reassigned to a free slot in new array of cliententries. Earlier it used to point to a slot in oldentries resulting in a use-after-free bug. Thanks to Pranith for the assistance provided. Change-Id: Iabe40c7df475471a7df7bccb302aef496ded3f1c BUG: 1299314 Signed-off-by: Raghavendra G <rgowdapp@redhat.com> Reviewed-on: http://review.gluster.org/13249 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* all: reduce "inline" usageKaleb S KEITHLEY2016-01-188-45/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | There are three kinds of inline functions: plain inline, extern inline, and static inline. All three have been removed from .c files, except those in "contrib" which aren't our problem. Inlines in .h files, which are overwhelmingly "static inline" already, have generally been left alone. Over time we should be able to "lower" these into .c files, but that has to be done in a case-by-case fashion requiring more manual effort. This part was easy to do automatically without (as far as I can tell) any ill effect. In the process, several pieces of dead code were flagged by the compiler, and were removed. backport of Change-Id: I56a5e614735c9e0a6ee420dab949eac22e25c155, http://review.gluster.org/11769, BUG: 1245331 Change-Id: Iba1efb0bc578ea4a5e9bf76b7bd93dc1be9eba44 BUG: 1283302 Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/12646 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* core : Use correct path in dlopen for socket.soAtin Mukherjee2015-12-272-1/+7
| | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/12656 This patch fixes the path for socket.so file while loading the so dynamically. Also for config.memory-accounting & config.transport voltype is changed to glusterd to fix the warning message coming from xlator_volopt_dynload Change-Id: I0f7964814586f2018d4922b23c683f4e1eb3098e BUG: 1283833 Signed-off-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-on: http://review.gluster.org/12656 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/12670 Tested-by: NetBSD Build System <jenkins@build.gluster.org>
* ctr/sql: Providing for vol set for sqlcachesize and sqlWALsize and skip ↵Joseph Fernandes2015-12-226-142/+211
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | recording path 1. Providing vol set option for cache size and wal autocheck point so that performance can be tuned. 2. Removed recording of file path in the db. Trimming database columns. Path need not be stored in the db, as PARGFID, GFID, Basename is suffice to derive the path during migration. Backport of http://review.gluster.org/12972 > Change-Id: I2cb590451a6d244bc91fe66c6dbffe2c2059dfb8 > BUG: 1293034 > Signed-off-by: Joseph Fernandes <josferna@redhat.com> > Reviewed-on: http://review.gluster.org/12972 > Reviewed-by: N Balachandran <nbalacha@redhat.com> > Tested-by: Gluster Build System <jenkins@build.gluster.com> > Tested-by: NetBSD Build System <jenkins@build.gluster.org> > Reviewed-by: Dan Lambright <dlambrig@redhat.com> > Tested-by: Dan Lambright <dlambrig@redhat.com> Signed-off-by: Joseph Fernandes <josferna@redhat.com> Change-Id: Ia1c109983ec6ce75ed27b8c08f454f5b6283c31d BUG: 1293659 Reviewed-on: http://review.gluster.org/13067 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Tested-by: Dan Lambright <dlambrig@redhat.com>
* glusterd/afr : Readdirp performance improvementAnuradha Talur2015-12-211-0/+2
| | | | | | | | | | | | | | | | | | | Backport of http://review.gluster.org/#/c/12467/ Add xlator options to index xlator with xattrs that it needs to keep track of. Change-Id: If818673be5e626f77e65cc3a340f8cdd624179c2 BUG: 1287531 Signed-off-by: Anuradha Talur <atalur@redhat.com> Reviewed-on: http://review.gluster.org/12467 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Ravishankar N <ravishankar@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Signed-off-by: Anuradha Talur <atalur@redhat.com> Reviewed-on: http://review.gluster.org/12848
* tier/libgfdb/sql: Correcting logic in sql query for readJoseph Fernandes2015-12-041-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Correcting query in the where clause from "a & b | c" to "a & (b | c)" where "a" is the condition to join the gf_file_tb and gf_flink_tb through gfids "b" is the condition for the write heat and "c" is the condition for read heat Backport of http://review.gluster.org/12823 > Change-Id: I99226d82b0efb68fbef3a40f02b215bb2b4370d6 > BUG: 1286656 > Signed-off-by: Joseph Fernandes <josferna@redhat.com> > Signed-off-by: Dan Lambright <dlambrig@redhat.com> > Reviewed-on: http://review.gluster.org/12823 > Tested-by: NetBSD Build System <jenkins@build.gluster.org> > Tested-by: Gluster Build System <jenkins@build.gluster.com> Signed-off-by: Joseph Fernandes <josferna@redhat.com> Change-Id: I70533c8589a6cd67e8737e110af0a23abed9013d BUG: 1287583 Reviewed-on: http://review.gluster.org/12868 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Tested-by: Dan Lambright <dlambrig@redhat.com>
* tier/ctr: Correcting rename logicJoseph Fernandes2015-11-261-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Problem: When a file with old_file_name and GFID_1 is renamed with a new_file_name which already exists and with GFID_2, this is what happens in linux internaly. a. "new_file_name" is unlinked for GFID_2 b. a hardlink "new_file_name" is created to GFID_1 c. "old_file_name" hardlink is unlinked for GFID_2. Well this is all internal to linux, and gluster just issues a rename system call at POSIX layer. But CTR Xlator doesn't delete the entries corresponding to the "new_file_name" and GFID_2. Thus leaving the stale entry in the DB. The following are the implications. a. Promotion are tried on these stale entries which will fail and show false results in the status of migration, b. GFID_2 Files with 2 hardlinks, which will have only one hardlink after the rename will not be promoted or demoted as the DB shows 2 entries. Solution: Delete the older database entry for the replaced hardlink Backport of http://review.gluster.org/12711 > Change-Id: I4eafa0872253e29ff1f0bec4283bcfc579ecf0e2 > BUG: 1284090 > Signed-off-by: Joseph Fernandes <josferna@redhat.com> > Reviewed-on: http://review.gluster.org/12711 > Tested-by: NetBSD Build System <jenkins@build.gluster.org> > Tested-by: Gluster Build System <jenkins@build.gluster.com> > Reviewed-by: Dan Lambright <dlambrig@redhat.com> > Tested-by: Dan Lambright <dlambrig@redhat.com> Signed-off-by: Joseph Fernandes <josferna@redhat.com> Change-Id: Ic35348303ec21f9bd19f20a48f3141449349668b BUG: 1285688 Reviewed-on: http://review.gluster.org/12762 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Tested-by: Dan Lambright <dlambrig@redhat.com>
* features/changelog: Capture FXATTROP and XATTROP in changelogKotresh HR2015-11-241-0/+4
| | | | | | | | | | | | | | | | | GEO-REP INTEROP WITH SHARD FEATURE shard xlator updates size of the file using FXATTROP or XATTROP. Hence record the same in changelog. BUG: 1284453 Change-Id: I2f14b6075f863c0bed3ee2a159085b9b536a756d Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/12225 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/12732 Reviewed-by: Aravinda VK <avishwan@redhat.com>
* cluster/ec: Allow read fops to be processed in parallelXavier Hernandez2015-11-241-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently ec only sends a single read request at a time for a given inode. Since reads do not interfere between them, this patch allows multiple concurrent read requests to be sent in parallel. This is a backport of these patches: > Change-Id: If853430482a71767823f39ea70ff89797019d46b > BUG: 1245689 > Signed-off-by: Xavier Hernandez <xhernandez@datalab.es> > Reviewed-on: http://review.gluster.org/11742 > Tested-by: NetBSD Build System <jenkins@build.gluster.org> > Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> > Tested-by: Gluster Build System <jenkins@build.gluster.com> > > Change-Id: I6042129f09082497b80782b5704a52c35c78f44d > BUG: 1276031 > Signed-off-by: Xavier Hernandez <xhernandez@datalab.es> Change-Id: I1b1146d1fd1828b12bfc566cd76e5ea110f8909b BUG: 1251467 Signed-off-by: Xavier Hernandez <xhernandez@datalab.es> Reviewed-on: http://review.gluster.org/12447 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* glusterd: cli command implementation for bitrot scrub statusGaurav Kumar Garg2015-11-222-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is backport of: http://review.gluster.org/10231 CLI command for bitrot scrub status will be : gluster volume bitrot <volname> scrub status Above command will show the statistics of bitrot scrubber. Upon execution of this command it will show some common scrubber tunable value of volume <VOLNAME> followed by statistics of scrubber statistics of individual nodes. sample ouput for single node: Volume name : <VOLNAME> State of scrub: Active Scrub frequency: biweekly Bitrot error log location: /var/log/glusterfs/bitd.log Scrubber error log location: /var/log/glusterfs/scrub.log ========================================================= Node name: Number of Scrubbed files: Number of Unsigned files: Last completed scrub time: Duration of last scrub: Error count: ========================================================= This is just infrastructure. list of bad file, last scrub time, error count value will be taken care by http://review.gluster.org/#/c/12503/ and http://review.gluster.org/#/c/12654/ patches. >> Change-Id: I3ed3c7057c9d0c894233f4079a7f185d90c202d1 >> BUG: 1207627 >> Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> >> Reviewed-on: http://review.gluster.org/10231 >> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> >> Tested-by: NetBSD Build System <jenkins@build.gluster.org> >> Tested-by: Gluster Build System <jenkins@build.gluster.com> Change-Id: I45ed94e5e0e78a1e007c30eb0b252f74cf3c9187 BUG: 1283881 Signed-off-by: Gaurav Kumar Garg <ggarg@redhat.com> Reviewed-on: http://review.gluster.org/12704 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com>
* tier/ctr: Providing option to record or ignore metadata heatJoseph Fernandes2015-11-161-3/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently we heat up a file for both data and metadata write. Here we provide a ctr xlator option called "ctr-record-metadata-heat" were the admin can decide on recording metadata heat i.e heatup a file on metadata writes or not. Metadata data operation are a. setattr: explicit changing of atime/mtime using utimes, changing of posix permissions of the file b. rename: Renaming a file, c. unlink, link: adding or deleting hardlinks d. xattrs: setting or removal of xattrs. NOTE: atime, mtime and ctime change through writev, readv, truncate, mknod and create will not be considered here as these fops are data and primary metadata fops. Defaultly "ctr-record-metadata-heat" is off. Admin can switch it on using gluster volume set command. Backport of http://review.gluster.org/12540 > Change-Id: I91157509255dd5cb429cda2b6d4f64582e155e7b > BUG: 1279166 > Signed-off-by: Joseph Fernandes <josferna@redhat.com> > Reviewed-on: http://review.gluster.org/12540 > Tested-by: NetBSD Build System <jenkins@build.gluster.org> > Tested-by: Gluster Build System <jenkins@build.gluster.com> > Reviewed-by: Dan Lambright <dlambrig@redhat.com> > Tested-by: Dan Lambright <dlambrig@redhat.com> Signed-off-by: Joseph Fernandes <josferna@redhat.com> Change-Id: I986c319f0cc337b0692a1dd02f71254e786afac4 BUG: 1282315 Reviewed-on: http://review.gluster.org/12582 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Tested-by: Dan Lambright <dlambrig@redhat.com>
* tier/libgfdb: Extending log level flexibity in libgfdbJoseph Fernandes2015-11-112-86/+131
| | | | | | | | | | | | | | | | | | | | | | | | | | Extending log level flexibity to relevant fops and operations This is an extension to http://review.gluster.org/#/c/12491/ Backport of http://review.gluster.org/#/c/12567/ > Change-Id: I33b2f7732f89f52569fb99baa692c7e3bb4c7ab1 > BUG: 1277352 > Signed-off-by: Joseph Fernandes <josferna@redhat.com> > Reviewed-on: http://review.gluster.org/12567 > Tested-by: NetBSD Build System <jenkins@build.gluster.org> > Tested-by: Gluster Build System <jenkins@build.gluster.com> > Reviewed-by: Dan Lambright <dlambrig@redhat.com> > Tested-by: Dan Lambright <dlambrig@redhat.com> Signed-off-by: Joseph Fernandes <josferna@redhat.com> Change-Id: Idcde04a65775ce98367967faf8a53b0f07ff022e BUG: 1279059 Reviewed-on: http://review.gluster.org/12569 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Tested-by: Dan Lambright <dlambrig@redhat.com>
* gfapi: xattr key length check to avoid brick crashMilind Changire2015-11-091-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | Added check to test if xattr key length > max allowed for OS distribution and return: EINVAL if xattr name pointer is NULL or 0 length ENAMETOOLONG if xattr name length > max allowed for distribution Function exit path for invalid input is via label "out:" for mandatory __GLFS_EXIT_FS. Typically the VFS does this in the kernel for us. But since we are bypassing the VFS by providing the libgfapi to talk directly to the brick process, we need to add such checks. Change-Id: I610a8440871200ae4640351902b752777a3ec0c2 BUG: 1272926 Signed-off-by: Milind Changire <mchangir@redhat.com> Reviewed-on: http://review.gluster.org/12207 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> (cherry picked from commit 47d8d2fc9c88c95dfcae2c5c06e6eb3b1ce03a92) Reviewed-on: http://review.gluster.org/12387 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* marker: do remove xattr only for last linkvmallika2015-11-091-3/+3
| | | | | | | | | | | | | | | | | | | | | | | This is a backport of http://review.gluster.org/#/c/12033/ With unlink, rename, rmdir, contribution xattrs are removed. If the file is a last link then remove_xattr will fail with ENOENT. So it better to perform remove_xattr only if there are more links to the file > Change-Id: Ifc1e7fda4d310fd87f6f28a635c9ea78b8f3929d > BUG: 1257694 > Signed-off-by: vmallika <vmallika@redhat.com> Change-Id: Icf5fdd86bbb8eef0adeb9518e89e5b612e9e0705 BUG: 1279331 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/12549 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* tier/libgfdb: Replacing ASCII query file with binaryJoseph Fernandes2015-11-0810-279/+1039
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Earlier, when the database was queried we used to save all the queried records in an ASCII format in the query file. This caused issues like filename having ASCII delimiter and used to take a lot of space. The tier.c file also had a lot of parsing code. Here we changed the format of the query file to binary. All the logic of serialization and formating of query record is done by libgfdb. Libgfdb provides API, gfdb_write_query_record() and gfdb_read_query_record(), which the user i.e tier migrator and CTR xlator can use to write to and read from query file. With this binary format we save on disk space i.e reduce to 50% atleast as we are saving GFID's in binary format 16 bytes and not the string format which takes 36 bytes + We are not saving path of the file + we are also saving on ASCII delimiters. The on disk format of query record is as follows, +---------------------------------------------------------------------------+ | Length of serialized query record | Serialized Query Record | +---------------------------------------------------------------------------+ 4 bytes Length of serialized query record | | -------------------------------------------------| | | V Serialized Query Record Format: +---------------------------------------------------------------------------+ | GFID | Link count | <LINK INFO> |..... | FOOTER | +---------------------------------------------------------------------------+ 16 B 4 B Link Length 4 B | | | | -----------------------------| | | | | | V | Each <Link Info> will be serialized as | +-----------------------------------------------+ | | PGID | BASE_NAME_LENGTH | BASE_NAME | | +-----------------------------------------------+ | 16 B 4 B BASE_NAME_LENGTH | | | ------------------------------------------------------------------------| | | V FOOTER is a magic number 0xBAADF00D indicating the end of the record. This also serves as a serialized schema validator. Backport of http://review.gluster.org/#/c/12354/ > Change-Id: I9db7416fd421e118dd44eafab8b535caafe50d5a > BUG: 1272207 > Signed-off-by: Joseph Fernandes <josferna@redhat.com> > Reviewed-on: http://review.gluster.org/12354 > Reviewed-by: N Balachandran <nbalacha@redhat.com> > Tested-by: Gluster Build System <jenkins@build.gluster.com> > Reviewed-by: Dan Lambright <dlambrig@redhat.com> > Tested-by: Dan Lambright <dlambrig@redhat.com> Change-Id: I170c579027f2594a58706f826e3ddf89e34022f4 BUG: 1263619 Signed-off-by: Joseph Fernandes <josferna@redhat.com> Reviewed-on: http://review.gluster.org/12535 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Tested-by: Dan Lambright <dlambrig@redhat.com>
* tier/ctr: Ignore CTR Lookup heal insert errorsJoseph Fernandes2015-11-073-3/+8
| | | | | | | | | | | | | | | | | | | | | | | | CTR doesnt read from the DB, so to make sure that file records are created it does a heal during a lookup. It remembers the decision in the inode context cache and retrys periodically. When the volume is restarted it looses all the inode cache from the previous time and CTR lookup heals tries the heal again, but this time it finds that the records are already there from sql and logs this error, and remembers this until the volume is restarted or inode is flushed out of inode cache of the brick. Solution: the log levels should be reduced to trace for this case and customers need not see this. Backport of http://review.gluster.org/#/c/12491/ Change-Id: I5f11e83c306ae912a90f12220f62bb7563b8eb96 BUG: 1279059 Signed-off-by: Joseph Fernandes <josferna@redhat.com> Reviewed-on: http://review.gluster.org/12534 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Tested-by: Dan Lambright <dlambrig@redhat.com>
* quota: add version to quota xattrsvmallika2015-11-021-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a backport of http://review.gluster.org/#/c/12386/ When a quota is disable and the clean-up process terminated without completely cleaning-up the quota xattrs. Now when quota is enabled again, this can mess-up the accounting A version number is suffixed for all quota xattrs and this version number is specific to marker xaltor, i.e when quota xattrs are requested by quotad/client marker will remove the version suffix in the key before sending the response > Change-Id: I1ca2c11460645edba0f6b68db70d476d8d26e1eb > BUG: 1272411 > Signed-off-by: vmallika <vmallika@redhat.com> > Reviewed-on: http://review.gluster.org/12386 > Tested-by: NetBSD Build System <jenkins@build.gluster.org> > Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> > Tested-by: Gluster Build System <jenkins@build.gluster.com> > Reviewed-by: Manikandan Selvaganesh <mselvaga@redhat.com> > Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Change-Id: I67b1b930b28411d76b2d476a4e5250c52aa495a0 BUG: 1277080 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/12487 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Raghavendra G <rgowdapp@redhat.com>
* cli : 'gluster volume help' output sorted alphabeticallyMohamed Ashiq2015-11-021-2/+2
| | | | | | | | | | | | | | | | | | | | | 'gluster volume help' output is not sorted alphabetically. This makes little harder for the user to search or get to know of few gluster volume commands usage just from gluster cli. Backport of http://review.gluster.org/11663 Cherry picked from 323e71617fee5020324540776d0d4469577f0afe Change-Id: I855da2e4748a5c2ff3be319c50fa9548d676ee8a BUG: 1276208 Signed-off-by: Mohamed Ashiq <mliyazud@redhat.com> >Reviewed-on: http://review.gluster.org/11663 >Tested-by: Gluster Build System <jenkins@build.gluster.com> >Reviewed-by: Manikandan Selvaganesh <mselvaga@redhat.com> >Reviewed-by: Anand Nekkunti <anekkunt@redhat.com> Reviewed-on: http://review.gluster.org/12452 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Nekkunti <anekkunt@redhat.com>
* logging : GF_LOG_NONE logs alwaysMohamed Ashiq2015-10-281-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | Shouldn't GF_LOG_NONE mean "Never log this"? If so, it's not being tested for and is, instead, treated as a higher priority than CRITICAL thus is always logged. Backport of http://review.gluster.org/11797 Cherry picked from 7b390983768e833a8df15b994038155c53d71bdd >Change-Id: Icad1e02a720a05ff21bd54ebf19c0032e6d5ce03 >BUG: 1246794 >Signed-off-by: Mohamed Ashiq <mliyazud@redhat.com> >Reviewed-on: http://review.gluster.org/11797 >Reviewed-by: Raghavendra Talur <rtalur@redhat.com> >Tested-by: NetBSD Build System <jenkins@build.gluster.org> Change-Id: Icad1e02a720a05ff21bd54ebf19c0032e6d5ce03 BUG: 1259167 Signed-off-by: Mohamed Ashiq <mliyazud@redhat.com> Reviewed-on: http://review.gluster.org/12087 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* tier/ctr: CTR DB named lookup heal of cold tier during attach tierJoseph Fernandes2015-10-101-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Heal hardlink in the db for already existing data in the cold tier during attach tier. i.e during fix layout do lookup to files in the cold tier. CTR xlator on the brick/server side does db update/insert of the hardlink on a namelookup. Currently the namedlookup is done synchronous to the fixlayout that is triggered by attach tier. This is not performant, adding more time to fixlayout. The performant approach is record the hardlinks on a compressed datastore and then do the namelookup asynchronously later, giving the ctr db eventual consistency master patch : http://review.gluster.org/#/c/11828/ >>Change-Id: I4ffc337fffe7d447804786851a9183a51b5044a9 >>BUG: 1252586 >>Signed-off-by: Joseph Fernandes <josferna@redhat.com> >>Reviewed-on: http://review.gluster.org/11828 >>Tested-by: Gluster Build System <jenkins@build.gluster.com> >>Reviewed-by: Dan Lambright <dlambrig@redhat.com> >>Tested-by: Dan Lambright <dlambrig@redhat.com> Signed-off-by: Joseph Fernandes <josferna@redhat.com> Change-Id: I61b185a54ae4e8c1d82804b95a278bfbea870987 BUG: 1261146 Reviewed-on: http://review.gluster.org/12331 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Tested-by: Dan Lambright <dlambrig@redhat.com>
* cluster/tier: add watermarks and policy driverDan Lambright2015-10-101-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Backport fix 12039 This fix introduces infrastructure to support different policies for promotion and demotion. Currently the tier feature automatically promotes and demotes files periodically based on access. This is good for testing but too stringent for most real workloads. It makes it difficult to fully utilize a hot tier- data will be demoted before it is touched- its unlikely a 100GB hot SSD will have all its data touched in a window of time. A new parameter "mode" allows the user to pick promotion/demotion polcies. The "test mode" will be used for *.t and other general testing. This is the current mechanism. The "cache mode" introduces watermarks. The watermarks represent levels of data residing on the hot tier. "cache mode" policy: The % the hot tier is full is called P. Do not promote or demote more than D MB or F files. A random number [0-100] is called R. Rules for migration: if (P < watermark_low) don't demote, always promote. if (P >= watermark_low) && (P < watermark_hi) demote if R < P; promote if R > P. if (P > watermark_hi) always demote, don't promote. gluster volume set {vol} cluster.watermark-hi % gluster volume set {vol} cluster.watermark-low % gluster volume set {vol} cluster.tier-max-mb {D} gluster volume set {vol} cluster.tier-max-files {F} gluster volume set {vol} cluster.tier-mode {test|cache} > Change-Id: I157f19667ec95aa1d53406041c1e3b073be127c2 > BUG: 1257911 > Signed-off-by: Dan Lambright <dlambrig@redhat.com> > Reviewed-on: http://review.gluster.org/12039 > Tested-by: Gluster Build System <jenkins@build.gluster.com> > Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Signed-off-by: Dan Lambright <dlambrig@redhat.com> Signed-off-by: Dan Lambright <dlambrig@redhat.com> Conflicts: xlators/cluster/dht/src/dht-rebalance.c xlators/cluster/dht/src/tier.c Change-Id: Ibfe6b89563ceab98708325cf5d5ab0997c64816c BUG: 1270527 Reviewed-on: http://review.gluster.org/12330 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Tested-by: Dan Lambright <dlambrig@redhat.com>
* tier/ctr: Solution for db locks for tier migrator and ctr using sqlite ↵Joseph Fernandes2015-10-095-91/+405
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | version less than 3.7 i.e rhel 6.7 Problem: On RHEL 6.7, we have sqlite version 3.6.2 which doesnt support WAL journaling mode, as this journaling mode is only available in sqlite 3.7 and above. As a result we cannot have to progreses concurrently accessing sqlite, without running into db locks! Well WAL is also need for performace on CTR side. Solution: This solution is to use CTR db connection for doing queries when WAL mode is absent. i,e tier migrator will send sync_op ipc calls to CTR, which in turn will do the query and create/update the query file suggested by tier migrator. Pending: Well this solution will stop the db locks but the performance is still an issue for CTR. We are developing an in-Memory Transaction Log (iMeTaL) which will help boost the CTR performance by doing in memory udpates on the IO path and later flush the updates to the db in a batch/segment flush. Master patch: http://review.gluster.org/#/c/12191 >> Change-Id: Ie3149643ded159234b5cc6aa6cf93b9022c2f124 >> BUG: 1240577 >> Signed-off-by: Joseph Fernandes <josferna@redhat.com> >> Signed-off-by: Dan Lambright <dlambrig@redhat.com> >> Signed-off-by: Joseph Fernandes <josferna@redhat.com> >> Reviewed-on: http://review.gluster.org/12191 >> Tested-by: Gluster Build System <jenkins@build.gluster.com> >> Reviewed-by: Luis Pabon <lpabon@redhat.com> Signed-off-by: Joseph Fernandes <josferna@redhat.com> Change-Id: Ie8c7a7e9566244c104531b579126bb57fbc6e32b BUG: 1270123 Reviewed-on: http://review.gluster.org/12325 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Dan Lambright <dlambrig@redhat.com> Tested-by: Dan Lambright <dlambrig@redhat.com>
* cluster/ec : Mark new entry changelog in entry self-healv3.7.5Ashish Pandey2015-10-061-0/+6
| | | | | | | | | | | | | | | | | | | | Problem : When a new entry is created dirty mark xattrs are not created this will need full heal to be performed, even when there are partial failures. Solution : Marks new entry changelog in self-heal. PS: Also fixed erasing of dirty markers when no data heal is required. BUG: 1258313 Signed-off-by: Ashish Pandey <aspandey@redhat.com> Change-Id: I156e3d3201afa77efe118e1aaace1d91c90a9613 Reviewed-on: http://review.gluster.org/12306 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* fd: Do fd_bind on successful openPranith Kumar K2015-10-052-10/+19
| | | | | | | | | | | | | | | | | | | | | | | - fd_unref should decrement fd->inode->fd_count only if it is present in the inode's fd list. - successful open/opendir should perform fd_bind. >Change-Id: I81dd04f330e2fee86369a6dc7147af44f3d49169 >BUG: 1207735 >Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> >Reviewed-on: http://review.gluster.org/11044 >Reviewed-by: Anoop C S <anoopcs@redhat.com> >Tested-by: NetBSD Build System <jenkins@build.gluster.org> >Tested-by: Gluster Build System <jenkins@build.gluster.com> >Reviewed-by: Raghavendra G <rgowdapp@redhat.com> BUG: 1259697 Change-Id: I73b79dd3519aa085fb84dde74b321511cbccce1a Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/12100 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* glusterd, dht: volume set for use-readdirp in dhtPranith Kumar K2015-10-041-1/+3
| | | | | | | | | | | | | | | | | | | | | >Change-Id: Icab246b1d02808864d878d949fa56f9f889b538a >BUG: 1265677 >Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> >Reviewed-on: http://review.gluster.org/12221 >Tested-by: NetBSD Build System <jenkins@build.gluster.org> >Tested-by: Gluster Build System <jenkins@build.gluster.com> >Reviewed-by: Raghavendra G <rgowdapp@redhat.com> >Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com> >Reviewed-by: Kaushal M <kaushal@redhat.com> >(cherry picked from commit 059db0254f5670a34f1a928155c0c7d1cd03b53a) Change-Id: Ifc46ed08fc10b32f5e814aa09c155e11e8c93138 BUG: 1267822 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/12269 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* features/shard: Port log messages to new frameworkKrutika Dhananjay2015-09-291-0/+7
| | | | | | | | | | | | Backport of: http://review.gluster.org/12217 Change-Id: I129ff0d6d1cab15078fa474132c290950f5e1137 BUG: 1266822 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/12236 Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org>
* posix: xattrop 'GF_XATTROP_ADD_ARRAY_WITH_DEFAULT' implementationvmallika2015-09-281-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a backport of http://review.gluster.org/#/c/11702 Implementation of xattrop type: GF_XATTROP_ADD_ARRAY_WITH_DEFAULT GF_XATTROP_ADD_ARRAY64_WITH_DEFAULT These operations are similar to 'GF_XATTROP_ADD_ARRAY', except that it adds a default value if xattr is missing or its value is zero on disk. One use-case of this operation is in inode-quota. When a new directory is created, its default dir_count should be set to 1. So when a xattrop performed setting inode-xattrs, it should account initial dir_count 1 if the xattrs are not present Here is the usage of this operation value required in xdata for each key struct array { int32_t newvalue_1; int32_t newvalue_2; ... int32_t newvalue_n; int32_t default_1; int32_t default_2; ... int32_t default_n; }; or struct array { int32_t value_1; int32_t value_2; ... int32_t value_n; } data[2]; fill data[0] with new value to add fill data[1] with default value xattrop GF_XATTROP_ADD_ARRAY_WITH_DEFAULT for i from 1 to n { if (xattr (dest_i) is zero or not set in the disk) dest_i = newvalue_i + default_i else dest_i = dest_i + newvalue_i } value in xdata after xattrop is successful struct array { int32_t dest_1; int32_t dest_2; ... int32_t dest_n; }; > Change-Id: Ic6a08473e99fd98299a839d4d8416081a7534efd > BUG: 1243946 > Signed-off-by: vmallika <vmallika@redhat.com> > Reviewed-on: http://review.gluster.org/11702 > Tested-by: NetBSD Build System <jenkins@build.gluster.org> > Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Change-Id: Ie0c8285d9d582afbc808b0fd878f6c02957ff928 BUG: 1266882 Signed-off-by: vmallika <vmallika@redhat.com> Reviewed-on: http://review.gluster.org/12241 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra G <rgowdapp@redhat.com>
* fuse: add "resolve-gids" mount option to overcome 32-groups limitNiels de Vos2015-09-281-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a --resolve-gids commandline option to the glusterfs binary. This option gets set when executing "mount -t glusterfs -o resolve-gids ...". This option is most useful in combination with the "acl" mount option. POSIX ACL permission checking is done on the FUSE-client side to improve performance (in addition to the checking on the bricks). The fuse-bridge reads /proc/$PID/status by default, and this file contains maximum 32 groups. Any local (client-side) permission checking that requires more than the first 32 groups will fail. By enabling the "resolve-gids" option, the fuse-bridge will call getgrouplist() to retrieve all the groups from the user accessing the mountpoint. This is comparable to how "nfs.server-aux-gids" works. Note that when a user belongs to more than ~93 groups, the volume option server.manage-gids needs to be enabled too. Without this option, the RPC-layer will need to reduce the number of groups to make them fit in the RPC-header. Cherry picked from commit 64a5bf3749c67fcc00773a2716d0c7b61b0b4417: > Change-Id: I7ede90d0e41bcf55755cced5747fa0fb1699edb2 > BUG: 1246275 > Signed-off-by: Niels de Vos <ndevos@redhat.com> > Reviewed-on: http://review.gluster.org/11732 > Tested-by: NetBSD Build System <jenkins@build.gluster.org> > Reviewed-by: Ravishankar N <ravishankar@redhat.com> > Tested-by: Gluster Build System <jenkins@build.gluster.com> > Reviewed-by: jiffin tony Thottan <jthottan@redhat.com> > Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Change-Id: I7ede90d0e41bcf55755cced5747fa0fb1699edb2 BUG: 1246397 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/11875 Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* tier/ctr: Solving DB Lock issue due to write contention from db connectionsJoseph Fernandes2015-09-117-6/+90
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a backport of 12031. > Problem: The DB on the brick is been accessed by CTR, for write and > tier migrator, for read and write. The write from tier migrator is reseting > the heat counters after a cycle. Since we are using sqlite, two connections > trying to write would cause a db lock contention. As a result CTR used to fail > to update the db. > Solution: Using the same db connection of CTR for reseting the heat counters. > 1) Introducted a new IPC FOP for CTR > 2) After the query do a ipc syncop to the underlying client xlator associated > to the brick. > 3) CTR in brick will catch the IPC FOP and cleat the heat counters. > Change-Id: I53306bfc08dcdba479deb4ccc154896521336150 > BUG: 1260730 > Signed-off-by: Joseph Fernandes <josferna@redhat.com> > Reviewed-on: http://review.gluster.org/12031 > Tested-by: NetBSD Build System <jenkins@build.gluster.org> > Tested-by: Gluster Build System <jenkins@build.gluster.com> Signed-off-by: Dan Lambright <dlambrig@redhat.com> Conflicts: xlators/cluster/dht/src/tier.c Change-Id: I88aa289cdf21e216b42c3d8ccfb4e7e828b43772 BUG: 1262341 Reviewed-on: http://review.gluster.org/12161 Reviewed-by: Joseph Fernandes Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: Dan Lambright <dlambrig@redhat.com>
* cluster/tier: add gluster v tier <vol>Dan Lambright2015-09-101-13/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a backport of 11984. > Currently the tier feature piggy backs off the rebalance command > syntax to obtain status and this is clumsy. Introduce a new > tier command that can do tier specific operations, starting > with volume status to display counters. > Old commands: > gluster volume attach-tier <vol> [replica count] {bricklist..} > gluster volume detach-tier <vol> {start|stop|commit} > New commands: > gluster volume tier <vol> attach [replica count] {bricklist} | > detach {start|stop|commit} | > status > Change-Id: Ic07b3c6260588162de7d34380f8cbd3d8a7f35d3 > BUG: 1255693 > Signed-off-by: Dan Lambright <dlambrig@redhat.com> > Reviewed-on: http://review.gluster.org/11984 > Reviewed-by: Gaurav Kumar Garg <ggarg@redhat.com> > Tested-by: Gluster Build System <jenkins@build.gluster.com> Signed-off-by: Dan Lambright <dlambrig@redhat.com> Change-Id: Id45bd0fa6b8606dd47863de83a694908da393229 BUG: 1261664 Signed-off-by: Dan Lambright <dlambrig@redhat.com> Reviewed-on: http://review.gluster.org/12143 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Gaurav Kumar Garg <ggarg@redhat.com>
generated by cgit (git 2.34.1) at 2024-04-19 05:12:36 +0000