summaryrefslogtreecommitdiffstats
path: root/glusterfs.spec.in
Commit message (Collapse)AuthorAgeFilesLines
* packaging: /var/lib/glusterd/options should be %config(noreplace)Kaleb S. KEITHLEY2017-08-111-1/+1
| | | | | | | | | | | | | /var/lib/glusterd/options is where cluster.enabled-shared-storage is persisted. If the file is removed as part of an uninstall/reinstall or update then the state of shared storage could be lost. Change-Id: Ie18c3d883df71c1857fd6996d9c03ab247580b70 BUG: 1478499 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: https://review.gluster.org/17979 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* packaging: own files in (/var)/run/gluster/shared_storage/nfs-ganeshaKaleb S. KEITHLEY2017-07-281-1/+14
| | | | | | | | | | | | | | | | | | | | | | | | The nfs-ganesha rpm owns /etc/ganesha and /etc/ganesha/ganesha.conf, but gluster-ganesha installs a ganesha-ha.conf.sample in /etc/ganesha/ Ganesha HA expects to find the config files in /var/run/.../nfs-ganesha and for there to be symlinks from /etc/ganesha/* to /var/run/... As exports are created the ganesha export files are written to /var/run/gluster/shared_storage/nfs-ganesha/exports/* This change creates rpm %ghosts for most of these files to manage ownership within rpm and ensure they are not deleted or overwritten during package install/upgrade/removal. The name of the exports varies, so it's not possible AFAIK to create wildcard %ghosts for them. Change-Id: Ic4389291c0af0bd72c22fa742cdfa2011b9286f3 BUG: 1472446 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: https://review.gluster.org/17883 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* packaging: glusterfs-ganesha update sometimes fails semanageKaleb S. KEITHLEY2017-07-281-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | Depending on how dnf orders updates, the updated version of selinux-policy-targeted with ganesha_use_fusefs may not be updated before the glusterfs-ganesha update execute its %post scriptlet containing the `semanage ganesha_use_fusefs ...` command. In such situations the semanage command (silently) fails. Use a %trigger (and %triggerun) to run the scriptlet (again) after selinux-policy-targeted with ganesha_use_fusefs has been installed or updated. Note: the %triggerun is probably unnecessary, but it doesn't hurt. The release-3.10 branch is the "upstream master" for the glusterfs- ganesha subpackage. Note: to be merged after https://review.gluster.org/17806 Change-Id: I1ad06d79fa1711e4abf038baf9f0a5b7bb665934 BUG: 1470040 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: https://review.gluster.org/17756 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* common-ha: enable and disable selinux ganesha_use_fusefsKaleb S. KEITHLEY2017-06-221-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Starting in Fedora 26 and RHEL 7.4 there are new targeted policies in selinux which include a tuneable to allow ganesha.nfsd to access the gluster (FUSE) shared_storage volume where ganesha maintains its state. N.B. rpm doesn't have a way to distinguish between RHEL 7.3 or 7.4 so it can't be enabled for RHEL at this time. /usr/sbin/semanage is in policycoreutils-python in RHEL (versus policycoreutils-python-utils in Fedora.) Once RHEL 7.4 GAs we may also wish to specify the version for RHEL 7 explicitly, i.e. Requires: selinux-policy >= 3.13.1-160. But beware, the corresponding version in Fedora 26 seems to be selinux-policy-3.13.1.258 or so. (Maybe earlier versions, but that's what's currently in the F26 beta. release-3.10 is the upstream master branch for glusterfs-ganesha. For release-3.11 and later storhaug needs a similar change, which is tracked by https://github.com/linux-ha-storage/storhaug/issues/11 Maybe at some point we would want to consider migrating the targeted policies for glusterfs (and nfs-ganesha) from selinux-policy to a glusterfs-selinux (and nfs-ganesha-selinux) subpackage? Change-Id: I04a5443edd00636cbded59a2baddfa98095bf7ac BUG: 1463641 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: https://review.gluster.org/17597 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: jiffin tony Thottan <jthottan@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* rpm: replace renamed python-gluster with python2-glusterNiels de Vos2017-02-211-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When upgrading from < 3.10, the old python-gluster package causes conflicts with the newly renamed python2-gluster package. This can be solved by adding the appropriate Provides and Obsoletes to the python2-gluster RPM. Details on renaming packages are listed on the Fedora Packaging Guidelines. Cherry picked from commit 431011098efc5702a2f49fad1975fb956cdc9e00: > Change-Id: Ib143bf69022c45abe2d5e8d31d3375a6b85f75da > URL: https://fedoraproject.org/wiki/Packaging:Guidelines#Renaming.2FReplacing_Existing_Packages > BUG: 1414902 > Signed-off-by: Niels de Vos <ndevos@redhat.com> > Reviewed-on: https://review.gluster.org/16649 > Smoke: Gluster Build System <jenkins@build.gluster.org> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > CentOS-regression: Gluster Build System <jenkins@build.gluster.org> > Reviewed-by: Prashanth Pai <ppai@redhat.com> > Reviewed-by: Anoop C S <anoopcs@redhat.com> Change-Id: Ib143bf69022c45abe2d5e8d31d3375a6b85f75da BUG: 1415226 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: https://review.gluster.org/16696 Reviewed-by: Prashanth Pai <ppai@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* common-ha: revert switch to storhaugKaleb S. KEITHLEY2017-02-201-1/+12
| | | | | | | | | | | | | we'll try again for 3.11. Change-Id: Ib4c50414dc3d16a23dc7a49020445129da55843c BUG: 1410843 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: https://review.gluster.org/16692 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* build: Add gf_attach to glusterfs-server packageAnoop C S2017-02-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously gf_attach was listed under glusterfs-fuse sub-package which introduced the dependency for glusterfs-api. So as per the discussion on gluster-devel[1] moving it to glusterfs-server. [1] http://lists.gluster.org/pipermail/gluster-devel/2017-February/052111.html > Change-Id: I3d646d7c2e556d8f37e6da67bdedd0738739e01b > BUG: 1423448 > Signed-off-by: Anoop C S <anoopcs@redhat.com> > Reviewed-on: https://review.gluster.org/16660 > Smoke: Gluster Build System <jenkins@build.gluster.org> > Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com> > Reviewed-by: Niels de Vos <ndevos@redhat.com> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > CentOS-regression: Gluster Build System <jenkins@build.gluster.org> (cherry picked from commit 8e7a8ea818a1cc7fb23b412023a735b3939194f4) Change-Id: I3d646d7c2e556d8f37e6da67bdedd0738739e01b BUG: 1423063 Signed-off-by: Anoop C S <anoopcs@redhat.com> Reviewed-on: https://review.gluster.org/16664 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* packaging: python/python2(/python3) cleanup, againKaleb S. KEITHLEY2017-02-071-2/+7
| | | | | | | | | | | | | | | | mistake missed in the previous patches see https://review.gluster.org/16487 and https://review.gluster.org/16446 BUG: 1415226 Change-Id: I3d1b04d1107a651a4ee0b816ccc04f8bff13917c Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: https://review.gluster.org/16557 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* extras: Provide group set for md-cache and invalidation optionsPoornima G2017-02-061-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | To enable the integration of md-cache and invalidation features we need to perform 3 volume set options in a specific order. In order to ease this for user provide a group volume set option. Usage: gluster vol set <VOLNAME> group metadata-cache >Reviewed-on: https://review.gluster.org/16503 >Smoke: Gluster Build System <jenkins@build.gluster.org> >NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> >CentOS-regression: Gluster Build System <jenkins@build.gluster.org> >Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> >Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Change-Id: I9bf0fd4217aa2a1c7ffbdc93e879b10f87addeac BUG: 1419306 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: https://review.gluster.org/16546 Tested-by: Atin Mukherjee <amukherj@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* core: run many bricks within one glusterfsd processJeff Darcy2017-02-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for multiple brick translator stacks running in a single brick server process. This reduces our per-brick memory usage by approximately 3x, and our appetite for TCP ports even more. It also creates potential to avoid process/thread thrashing, and to improve QoS by scheduling more carefully across the bricks, but realizing that potential will require further work. Multiplexing is controlled by the "cluster.brick-multiplex" global option. By default it's off, and bricks are started in separate processes as before. If multiplexing is enabled, then *compatible* bricks (mostly those with the same transport options) will be started in the same process. Backport of: > Change-Id: I45059454e51d6f4cbb29a4953359c09a408695cb > BUG: 1385758 > Reviewed-on: https://review.gluster.org/14763 Change-Id: I4bce9080f6c93d50171823298fdf920258317ee8 BUG: 1418091 Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: https://review.gluster.org/16496 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* packaging: python/python2(/python3) cleanup, againKaleb S. KEITHLEY2017-01-311-3/+3
| | | | | | | | | | | | | | | | missed a couple things in the previous patch mainline change http://review.gluster.org/#/c/16486/ mainline BZ 1414902 Change-Id: I0ebd5c431abd9af5e1b680ad52318219edb4bfa7 BUG: 1415226 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: https://review.gluster.org/16487 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* core: remove experimental xlators and associated testsKaleb S. KEITHLEY2017-01-241-11/+0
| | | | | | | | | | | | | | experimental xlators not included in 3.10 Change-Id: I547480ee5e7912664784643e436feb198b6d16d0 BUG: 1415866 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: https://review.gluster.org/16447 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* packaging: python/python2(/python3) cleanupKaleb S. KEITHLEY2017-01-231-24/+33
| | | | | | | | | | | | | | | | Update to current python2 (vs. python3) guidelines. While doing package review of new python-glusterfs-api we were reminded that we should update the glusterfs.spec(.in) accordingly. Change-Id: I67c88f209e803425c5ef70cb8d3e7ffd8e396c7f BUG: 1415226 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: https://review.gluster.org/16446 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* storhaug HA: first step, remove resource agents and setup scriptKaleb S. KEITHLEY2017-01-171-10/+5
| | | | | | | | | | | | | | | | resource agents and setup script(s) are now in storhaug This is a phased switch-over to storhaug. Ultimately all components here should be (re)moved to the storhaug project and its packages. But for now some will linger here. Change-Id: Ied3956972b14b14d8a76e22c583b1fe25869f8e7 BUG: 1410843 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/16349 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* rpm: fix glusterfs-server(%postun) scriptlet errorNiels de Vos2017-01-131-1/+0
| | | | | | | | | | | | | | | | While introducing the usage of the %firewalld_restart macro, the old scriplet was not correctly removed. This causes an error to be displayed when the RPM gets updated or uninstalled. Fixes: f99750b4477538cd1f97ce6340e1813202f986e2 Change-Id: I69091d8e9e3c412dc3cb52246967eac29d2ebc90 BUG: 1410853 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/16408 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* rpm: depend on firewalld-filesystem for directory ownershipNiels de Vos2017-01-091-9/+10
| | | | | | | | | | | | | | | Also use the %firewalld_reload macro that is provided by the firewalld-filesystem package. BUG: 1410853 Change-Id: Ibbbc18cc394f8b1e5ba74927effc41c466667479 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/16351 Smoke: Gluster Build System <jenkins@build.gluster.org> Tested-by: Kaleb KEITHLEY <kkeithle@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* tests: Remove rpm testNigel Babu2017-01-061-1/+0
| | | | | | | | | | | | | | | This is already tested by our smoke test. Testing it again is redundant. Change-Id: Icae4e8650002cd847dcb7ea76fd0447df7e72816 BUG: 1408755 Signed-off-by: Nigel Babu <nigelb@redhat.com> Reviewed-on: http://review.gluster.org/16287 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Anoop C S <anoopcs@redhat.com> Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* build: Use %{_datadir} rpm macro in spec fileAnoop C S2016-12-061-4/+4
| | | | | | | | | | | Change-Id: I18383b2a5f0ff5233d47715c2e91514b6c3f2b7c BUG: 1198849 Signed-off-by: Anoop C S <anoopcs@redhat.com> Reviewed-on: http://review.gluster.org/15985 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* glusterd/ganesha : handle volume reset properly for ganesha optionsJiffin Tony Thottan2016-12-061-1/+3
| | | | | | | | | | | | | | | | | The "gluster volume reset" should first unexport the volume and then delete export configuration file. Also reset option is not applicable for ganesha.enable if volume value is "all". This patch also changes the name of create_export_config into manange_export_config Change-Id: Ie81a49e7d3e39a88bca9fbae5002bfda5cab34af BUG: 1397795 Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> Reviewed-on: http://review.gluster.org/15914 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: soumya k <skoduri@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* build: add systemd dependency to the glusterfs sub-packageMilind Changire2016-12-011-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | Problem: /bin/systemctl is not available at install time of primary glusterfs package. Solution: Add %{?systemd_requires} to the glusterfs sub-package install time requirements. Replace all "Requires: systemd" and "Requires: systemd-units" with %{?systemd_requires}. %systemd_requires is defined in /usr/lib/rpm/macros.d/macros.systemd systemd-units is provided by systemd. Add BuildRequires: systemd for the definition of %systemd_requires as well. Change-Id: I980ece7d538ea177ca6b0e70c1c169e6f04c46d4 BUG: 1399031 Signed-off-by: Milind Changire <mchangir@redhat.com> Reviewed-on: http://review.gluster.org/15936 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org>
* all: remove dead translatorsJeff Darcy2016-11-291-6/+0
| | | | | | | | | | | | | | | | | | | | | The following have been completely removed from the source tree, makefiles, configure script, and RPM specfile. cluster/afr/pump cluster/ha cluster/map features/filter features/mac-compat features/path-convertor features/protect Change-Id: I2f966999ac3c180296ff90c1799548fba504f88f Signed-off-by: Jeff Darcy <jdarcy@redhat.com> Reviewed-on: http://review.gluster.org/15906 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* build: Update version check for resource-agents on RHELKaleb KEITHLEY2016-11-081-3/+3
| | | | | | | | | | | | | | | | | | | | | With bug1302545[1] and bug1303037[2], portblock resource agent is made available as part of resource-agents-3.9.5* package on RHEL 6.8 and RHEL 7.3 respectively. This change is to update the same in the glusterfs spec. [1] https://bugzilla.redhat.com/show_bug.cgi?id=1302545 [2] https://bugzilla.redhat.com/show_bug.cgi?id=1303037 Change-Id: I5917e5f22f07b4121d636b099dd8815847e1338f BUG: 1389293 Author: Kaleb KEITHLEY <kkeithle@redhat.com> Signed-off-by: Soumya Koduri <skoduri@redhat.com> Reviewed-on: http://review.gluster.org/15803 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: jiffin tony Thottan <jthottan@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* build: incorrect Requires for portblock resource agentKaleb S. KEITHLEY2016-10-281-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | was: Requires: /usr/lib/ocf/resource.d/portblock s/b: Requires: /usr/lib/ocf/resource.d/heartbeat/portblock or: Requires: resource-agents >= 3.9.6 Note: RHEL6.8 and RHEL7.2 have resource-agents-3.9.5 which does not contain the portblock resource agent. I'm not sure what the point is actually of: Requires: /usr/lib/ocf/resource.d/heartbeat/portblock as it will fail to install on RHEL whether you have the resource-agents package installed or not. Hence wrapping it in %if ( fedora ). Change-Id: Ia7d6a475464c7469018678c98fc710a3b3bfc553 BUG: 1389293 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15743 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: jiffin tony Thottan <jthottan@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
* eventsapi/packaging: Fix wrong usage of %postAravinda VK2016-10-201-7/+18
| | | | | | | | | | | | | | | %postun was used for events package instead of %post. eventsd service should be restarted only after install/upgrade and not during uninstallation(%postun) BUG: 1386141 Change-Id: Iae3eab06d02c5f4134b3de09f040123bed053bb8 Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/15670 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* common-ha: Use UpdateExports dbus msg for refresh-configSoumya Koduri2016-10-191-1/+2
| | | | | | | | | | | | | | | In nfs-ganesha 2.4, new dbs msg type "UpdateExports" support has been added. With this support, the exports can be re-configured dynamically without the need to re-export the entries. Change-Id: Iee7330d33e91db1126974a2ff46becb3764f2e5e BUG: 1382258 Signed-off-by: Soumya Koduri <skoduri@redhat.com> Reviewed-on: http://review.gluster.org/15617 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* build: python-ctypes no longer exists in Fedora RawhideKaleb S. KEITHLEY2016-09-231-2/+14
| | | | | | | | | | | | | | Python packaging in Rawhide has a Virtual Provides of python-ctypes but that will be removed soon Change-Id: I353f7fcbff35dfbfb1a726c7608eef721976453d BUG: 1378436 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/15546 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Aravinda VK <avishwan@redhat.com>
* build: add systemd dependencyMilind Changire2016-09-141-1/+4
| | | | | | | | | | | | | | | | | Installs break with glusterfs getting installed before systemd installation. This patch adds a dependency for systemd appropriately for Fedora and RHEL platforms for glusterfs-server and glusterfs-events packages. Change-Id: Ica18f82a5e37c7755f0d386ce2ac6c70e8082815 BUG: 1375181 Signed-off-by: Milind Changire <mchangir@redhat.com> Reviewed-on: http://review.gluster.org/15469 Reviewed-by: Niels de Vos <ndevos@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* eventsapi/packaging: Fix conflict during rpm installAravinda VK2016-09-141-1/+5
| | | | | | | | | | | | | | | | | | | | | RPM installation fails with following error Error: Transaction check error: file /etc/glusterfs/eventsconfig.json conflicts between attempted installs of glusterfs-events-3.10dev-0.51.gitc9271ff.fc24.x86_64 and glusterfs-server-3.10dev-0.51.gitc9271ff.fc24.x86_64 Changed attributes of eventsconfig.json file as same as other config files and excluded this file in server rpm. BUG: 1375532 Change-Id: I3708c8fc58448cd5a6ebe611250f10e0658bdd58 Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/15486 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* eventsapi: Add Init scripts for different distributionsAravinda VK2016-09-091-2/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Added init scripts for - SysvInit(CentOS 6 or Red Hat 6) - rc.d (FreeBSD) Most of the latest distributions are using systemd. Support to be added for other distributions which are not using systemd. Removed systemctl wrapper functions(start/stop/status) from gluster-eventsapi CLI(peer_eventsapi.py). Status and Reload re-implemented using pid file check. Added pid file support for glustereventsd. Following dependencies removed python-flask - Only used for example dashboard. User can install if required. python-fasteners - Not available for EPEL 6, added custom code using fcntl as replacement. BUG: 1365395 Change-Id: I26792eae9b11e93304f70b3997cd7d8d03b067f4 Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/15367 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* snapshot/eventsapi: Integrate snapshot events with eventsapiAvra Sengupta2016-09-011-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. EVENT_SNAPSHOT_CREATED : snapshot_name=snap1 volume_name=test_vol snapshot_uuid=26dd6c52-6021-40b1-a507-001a80401d70 2. EVENT_SNAPSHOT_CREATE_FAILED : snapshot_name=snap1 volume_name=test_vol error=Snapshot snap1 already exists 3. EVENT_SNAPSHOT_ACTIVATED : snapshot_name=snap1 snapshot_uuid=26dd6c52-6021-40b1-a507-001a80401d70 4. EVENT_SNAPSHOT_ACTIVATE_FAILED: snapshot_name=snap1 error=Snapshot snap1 is already activated. 5. EVENT_SNAPSHOT_DEACTIVATED : snapshot_name=snap1 snapshot_uuid=26dd6c52-6021-40b1-a507-001a80401d70 6. EVENT_SNAPSHOT_DEACTIVATE_FAILED : snapshot_name=snap3 error=Snapshot (snap3) does not exist. 7. EVENT_SNAPSHOT_SOFT_LIMIT_REACHED : volume_name=test_vol volume_id=2ace2616-5591-4b9b-be2a-38592dda5758 8. EVENT_SNAPSHOT_HARD_LIMIT_REACHED : volume_name=test_vol volume_id=2ace2616-5591-4b9b-be2a-38592dda5758 9. EVENT_SNAPSHOT_RESTORED : snapshot_name=snap1 volume_name=test_vol snapshot_uuid=3a840ec5-08da-4f2b-850d-1d5539a5d14d 10. EVENT_SNAPSHOT_RESTORE_FAILED : snapshot_name=snap10 error=Snapshot (snap10) does not exist 11. EVENT_SNAPSHOT_DELETED : snapshot_name=snap1 snapshot_uuid=d9ff3d4f-f579-4345-a4da-4f9353f0950c 12. EVENT_SNAPSHOT_DELETE_FAILED : snapshot_name=snap2 error=Snapshot (snap2) does not exist 13. EVENT_SNAPSHOT_CLONED : clone_uuid=93ba9f06-cb9c-4ace-aa52-2616e7f31022 snapshot_name=snap1 clone_name=clone2 14. EVENT_SNAPSHOT_CLONE_FAILED : snapshot_name=snap1 clone_name=clone2 error=Volume with name:clone2 already exists 15. EVENT_SNAPSHOT_CONFIG_UPDATED : auto-delete=enable config_type=system_config config_type=volume_config hard_limit=100 16. EVENT_SNAPSHOT_CONFIG_UPDATE_FAILED : error=Invalid snap-max-soft-limit 110. Expected range 1 - 100 17. EVENT_SNAPSHOT_SCHEDULER_INITIALISED : status=Success 18. EVENT_SNAPSHOT_SCHEDULER_INIT_FAILED 19. EVENT_SNAPSHOT_SCHEDULER_ENABLED : status=Successfuly Enabled 20. EVENT_SNAPSHOT_SCHEDULER_ENABLE_FAILED : error=Snapshot scheduler is already enabled. 21. EVENT_SNAPSHOT_SCHEDULER_SCHEDULE_ADDED : status=Successfuly added job job1 22. EVENT_SNAPSHOT_SCHEDULER_SCHEDULE_ADD_FAILED : status=Failed to add job job1 error=The job already exists. 23. EVENT_SNAPSHOT_SCHEDULER_SCHEDULE_EDITED : status=Successfuly edited job job1 24. EVENT_SNAPSHOT_SCHEDULER_SCHEDULE_EDIT_FAILED : status=Failed to edit job job2 error=The job cannot be found. 25. EVENT_SNAPSHOT_SCHEDULER_SCHEDULE_DELETED : status=Successfuly deleted job job1 26. EVENT_SNAPSHOT_SCHEDULER_SCHEDULE_DELETE_FAILED : status=Failed to delete job job1 error=The job cannot be found. 27. EVENT_SNAPSHOT_SCHEDULER_DISABLED : status=Successfuly Disabled 28. EVENT_SNAPSHOT_SCHEDULER_DISABLE_FAILED : error=Snapshot scheduler is already disabled. Change-Id: I3479cc3fb7af3c76ded67cf289f99547d0a55d21 BUG: 1370567 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/15329 Tested-by: Aravinda VK <avishwan@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com>
* geo-rep: Alternate command to generate SSH KeysAravinda VK2016-08-311-2/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | `gluster system:: execute gsec_create` is used to generate SSH Keys in all Master nodes and collect public keys in command initiated node. But this tool will not provide details if a peer node is down and unable to generate keys. New command will be introduced to create SSH Keys in all peer nodes. Usage: gluster-georep-sshkey generate or gluster-georep-sshkey generate --no-prefix Generates two SSH keys(one for gsyncd access and other for tar) in all peer nodes and collects the public keys to the local node where it is initiated. Adds `command=` prefix to common_secret.pem.pub if `--no-prefix` argument is not set. Shows status as below, +-----------+-------------+---------------+ | NODE | NODE STATUS | KEYGEN STATUS | +-----------+-------------+---------------+ | fvm2 | UP | OK | | localhost | UP | OK | +-----------+-------------+---------------+ BUG: 1356508 Change-Id: Ib202811f41f9986694f07d9eedba31db6ed4d18f Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/14732 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kotresh HR <khiremat@redhat.com>
* geo-rep: Simplify Non root user(mountbroker) SetupAravinda VK2016-08-301-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Setting up Non root Geo-replication is troublesome. Lot of steps involved like user setup, directory creation, setting up proper permissions, editing glusterd.vol file etc. Introducing `gluster-mountbroker` command, with this tool non root user setup steps are(Run the following commands in any one Slave node), gluster-mountbroker setup <MOUNT ROOT> <GROUP> For example, gluster-mountbroker setup /var/mountbroker-root geogroup Add user using, gluster-mountbroker add <VOLUME> <USER> For example, gluster-mountbroker add slavevol geoaccount Remove user or Volume using, gluster-mountbroker remove [--volume <VOLUME>] [--user <USER>] Example, gluster-mountbroker remove --volume slavevol --user geoaccount gluster-mountbroker remove --user geoaccount gluster-mountbroker remove --volume slavevol Check the status of setup using, gluster-mountbroker status Once the changes are complete, restart glusterd in all Slave nodes. and follow the Geo-rep instructions. Change-Id: Ied3fa009df6a886b24ddd86d39283fcfcff68c82 BUG: 1343333 Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/14544 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Saravanakumar Arumugam <sarumuga@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kotresh HR <khiremat@redhat.com>
* build: add dependency for psmisc for fuseMilind Changire2016-08-231-0/+4
| | | | | | | | | | | | | | | Add package dependency for psmisc for client package fuse for the killall utility. killall is referenced in the gluster logrotate config file. Change-Id: I4cc95fe4aaa52faf8f384b9834654d3d928c252d BUG: 1367665 Signed-off-by: Milind Changire <mchangir@redhat.com> Reviewed-on: http://review.gluster.org/15184 Reviewed-by: Niels de Vos <ndevos@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* build: correct date in the %changelogNiels de Vos2016-08-051-1/+1
| | | | | | | | | | | | | | | | | | | | | Building RPMs failed for me because of an incorrect date in the %changelog in the .spec. It seems that rpmlint identifies is as well: $ rpmlint glusterfs.spec ... (snipped non critical errors) glusterfs.spec: E: specfile-error warning: bogus date in %changelog: Wed Jul 15 2016 Aravinda VK <avishwan@redhat.com> Changed the date in the .spec to the date of the latest version (v16) of the patch that adds eventing (commit 5ed781ecf). BUG: 1334044 Change-Id: I5ef5003e227a83479f24103fc67139d7287fbc39 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/15099 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* xlators/ganesha : Remove the ganesha xlator code entirely from sourceJiffin Tony Thottan2016-08-041-1/+3
| | | | | | | | | | | | | | | | | ganesha xlator is dummy xlator which introduced as part of cli options. But all the ganesha related cli commands are handled from glusterd only. There is no point in keeping this xlator. Hence removing the same since it does not have any role in NFS-Ganesha intergration with gluster Change-Id: Id438d2fabd3afe7e91ae26522df8495c8e9e9308 BUG: 1361999 Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> Reviewed-on: http://review.gluster.org/15055 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: soumya k <skoduri@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* commn-HA: Add portblock RA to tickle packets post failover(/back)Soumya Koduri2016-08-031-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Portblock resource-agents are used to send tickle ACKs so as to reset the oustanding tcp connections. This can be used to reduce the time taken by the NFS clients to reconnect post IP failover/failback. Two new resource agents (nfs_block and nfs_unblock) of type ocf:portblock with action block & unblock are created for each Virtual-IP (cluster_ip-1). These resource agents along with cluster_ip-1 RA are grouped in the order of block->IP->unblock and also the entire group maintains same colocation rules so that they reside on the same node at any given point of time. The contents of tickle_dir are of the following format - * A file is created for each of the VIPs used in the ganesha cluster. * Each of those files contain entries about clients connected as below: SourceIP:port_num DestinationIP:port_num Hence when one server failsover, connections of the clients connected to other VIPs are not affected. Note: During testing I observed that tickle ACKs are sent during failback but not during failover, though I/O successfully resumed post failover. Also added a dependency on portblock RA for glusterfs-ganesha package as it may not be available (as part of resource-agents package) in all the distributions. Change-Id: Icad6169449535f210d9abe302c2a6971a0a96d6f BUG: 1354439 Signed-off-by: Soumya Koduri <skoduri@redhat.com> Reviewed-on: http://review.gluster.org/14878 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* eventsapi: Gluster Eventing Feature implementationAravinda VK2016-07-181-1/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | [Depends on http://review.gluster.org/14627] Design is available in `glusterfs-specs`, A change from the design is support of webhook instead of Websockets as discussed in the design http://review.gluster.org/13115 Since Websocket support depends on REST APIs, I will add Websocket support once REST APIs patch gets merged Usage: Run following command to start/stop Eventsapi server in all Peers, which will collect the notifications from any Gluster daemon and emits to configured client. gluster-eventsapi start|stop|restart|reload Status of running services can be checked using, gluster-eventsapi status Events listener is a HTTP(S) server which listens to events emited by the Gluster. Create a HTTP Server to listen on POST and register that URL using, gluster-eventsapi webhook-add <URL> [--bearer-token <TOKEN>] For example, if HTTP Server running in `http://192.168.122.188:9000` then add that URL using, gluster-eventsapi webhook-add http://192.168.122.188:9000 If it expects a Token then specify it using `--bearer-token` or `-t` We can also test Webhook if all peer nodes can send message or not using, gluster-eventsapi webhook-test <URL> [--bearer-token <TOKEN>] Configurations can be viewed/updated using, gluster-eventsapi config-get [--name] gluster-eventsapi config-set <NAME> <VALUE> gluster-eventsapi config-reset <NAME|all> If any one peer node was down during config-set/reset or webhook modifications, Run sync command from good node when a peer node comes back. Automatic update is not yet implemented. gluster-eventsapi sync Basic Events Client(HTTP Server) is included with the code, Start running the client with required port and start listening to the events. /usr/share/glusterfs/scripts/eventsdash.py --port 8080 Default port is 9000, if no port is specified, once it started running then configure gluster-eventsapi to send events to that client. Eventsapi Client can be outside of the Cluster, it can be run event on Windows. But only requirement is the client URL should be accessible by all peer nodes.(Or ngrok(https://ngrok.com) like tools can be used) Events implemented with this patch, - Volume Create - Volume Start - Volume Stop - Volume Delete - Peer Attach - Peer Detach It is easy to add/support more events, since it touches Gluster cmd code and to avoid merge conflicts I will add support for more events once this patch merges. BUG: 1334044 Change-Id: I316827ac9dd1443454df7deffe4f54835f7f6a08 Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/14248 Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* packaging: Remove ".py" extension from symlink targetAravinda VK2016-07-151-5/+4
| | | | | | | | | | | | | | | | | | | | | | S57glusterfind-delete-post.py* is packaged in $LIBEXEC/glusterfs/glusterfind directory, symlink created to /var/lib/glusterd/hooks directory ln -s $(libexecdir)/glusterfs/glusterfind/S57glusterfind-delete-post.py \ $(DESTDIR)$(GLUSTERD_WORKDIR)/hooks/1/delete/post/S57glusterfind-delete-post.py ".py" should be removed from symlink target so that build system will not try to compile the symlink files and generate .pyc/.pyo files. BUG: 1356868 Change-Id: I9155378aa72eb8559ba8af76d91a4985f69f38f9 Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/14928 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kotresh HR <khiremat@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* extras/cliutils: Fixed extra packaging lineAravinda VK2016-07-141-3/+3
| | | | | | | | | | | | | | | | cliutils was added in two places, $LIBEXEC and $PYTHON_SITE_PACKAGES Removed packaging from $LIBEXEC BUG: 1342356 Change-Id: Ie51d72b65996d14be2e7cab9a614327bec1e9555 Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/14923 CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Kaleb KEITHLEY <kkeithle@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org>
* extras/cliutils: Utils for creating CLI tools for GlusterAravinda VK2016-07-121-0/+7
| | | | | | | | | | | | | | | Refer README.md for documentation. BUG: 1342356 Change-Id: Ic88504177137136bbb4b8b2c304ecc4af9bcfe30 Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/14627 Reviewed-by: Prashanth Pai <ppai@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* Update the documentation link in the spec fileNigel Babu2016-07-071-1/+1
| | | | | | | | | | | | | | BUG: 1303668 Change-Id: Ifded6a03f437f16a0a1ad2bfb7377d07569a7735 Signed-off-by: Nigel Babu <nigelb@redhat.com> Reviewed-on: http://review.gluster.org/14869 Tested-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.org>
* build: glusterfs.spec(.in) firewalld file doesn't use %{_prefix}Kaleb S KEITHLEY2016-06-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | .../firewalld/services/glusterfs.xml in %server files section does not use %{_prefix} Other firewalld files, e.g., in the firewalld.src.rpm file use %{_prefix} N.B. the other 'hardcoded' path, "/sbin/mount.glusterfs" in the %files fuse section must remain as is, there is no macro for mount utilities to use as there is for, e.g., the %{_sbindir} macro for /usr/sbin. This doesn't matter for either RHEL6, where /sbin and /usr/sbin are distinct directories, or for Fedora and RHEL7, where /sbin is a symlink to /usr/sbin. E.g. see the nfs- utils.src.rpm where /sbin/mount.nfs is also 'hardcoded'. Change-Id: I902f47e3c589526c774d0aceb6fc2815abf86b01 BUG: 1350793 Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/14823 Smoke: Gluster Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Milind Changire <mchangir@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* posix2: Creation of experimental shell for posix2 xlatorShyam2016-06-081-0/+3
| | | | | | | | | | | | | | | DHT2 comes with a new backend on-disk format, that requires a new backend storage xlator. This experimental project will house the artifacts for the same. Change-Id: I71a3d60a0415d0c23b2294a02b838810fa8f101f BUG: 1338991 Signed-off-by: Shyam <srangana@redhat.com> Reviewed-on: http://review.gluster.org/14646 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* build: RHEL7 unpackaged files .../hooks/S57glusterfind-delete-post.{pyc,pyo}Kaleb S KEITHLEY2016-06-011-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | building on Real RHEL7 (versus mock?) results in installed (but unpackaged) files found: /var/lib/glusterd/hooks/1/delete/post/S57glusterfind-delete-post.pyc /var/lib/glusterd/hooks/1/delete/post/S57glusterfind-delete-post.pyo The same .spec file on Fedora 23 and RHEL6 does not encounter this issue. (Replacing the RHEL7 /usr/lib/rpm/brp-python-bytecompile file with the one from Fedora 23 also makes the problem go away. But we are probably not going to get a fixed rpm/rpmbuild soon enough to make this go away by itself.) Change-Id: Ib3db41cf0b7334a41b5174bba0c57e9aeb13407c BUG: 1341294 Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/14590 Smoke: Gluster Build System <jenkins@build.gluster.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* build: include a dummy config.sub and config.guess in releasesNiels de Vos2016-05-241-2/+10
| | | | | | | | | | | | | | | | | | | | | | | There is no hard requirement for a config.guess and config.sub script in the release tarball. By passing --build=... and --host=... to ./configure, the scripts are not executed. When doing local builds, the ./autogen.sh script (by running automake) will place a config.guess and config.sub script in the root of the source tree. Upon creation of the release ('make dist') tarball, the scripts are replaced by dummy copies from the build-aux/ directory. The main advantage to not include these scripts in the repository, is that there is no need to track upstream updates for them either. Change-Id: I5e930988a9e849ec5d0c84d2e30e61f2a9685f45 BUG: 1223937 Reported-by: Emmanuel Dreyfus <manu@netbsd.org> Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/14503 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* packaging: %postun libs ldconfig: relative path `1' used to build cacheMilind Changire2016-05-131-4/+8
| | | | | | | | | | | | | | Remove %post{un} {libs|api} -p /sbin/ldconfig optimization and move /sbin/ldconfig on a separate line. Change-Id: I8a4c3879afcb7cea08d4b303a2524432d2ffec06 BUG: 1330583 Signed-off-by: Milind Changire <mchangir@redhat.com> Reviewed-on: http://review.gluster.org/14312 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* packaging: additional dirs and files in /var/lib/glusterd/Milind Changire2016-05-121-2/+4
| | | | | | | | | | | | | | | | | | Add directories /var/lib/glusterd/hooks and /var/lib/glusterd/hooks/1 to the list for server package ownership Correct spelling for /var/lib/glusterd/ss_brick and /var/lib/glusterd/snaps Change-Id: I5dffa1db610ccd7e1db4082977dd53afec4aecba BUG: 1326410 Signed-off-by: Milind Changire <mchangir@redhat.com> Reviewed-on: http://review.gluster.org/14294 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* packaging: resource-agents sub-package needs arch-less requiresNiels de Vos2016-05-091-1/+1
| | | | | | | | | | | | | | | The glusterfs-resource-agents package is marked as 'noarch'. It should therefor not have a dependency on a specific architecture (is done with the _isa macro). BUG: 1334269 Change-Id: I3d24c0e4e60e368b22eef97bf3aabe6b020a23a9 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/14269 Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* packaging: additional dirs and files in /var/lib/glusterd/Kaleb S KEITHLEY2016-05-091-3/+4
| | | | | | | | | | | | | | | | | | | Directory /var/lib/glusterd/glusterfind/.keys doesn't need to be created, it just needs to be listed in the list of files. Also, S57glusterfind-delete-post.py under the hooks directory is actually a symlink to libexec/glusterfs/glusterfind/... so don't list %attr(...) for the symlink Change-Id: Ia4571a7b5d0cc79c70cc120f7770bf2e6453bc84 BUG: 1326410 Signed-off-by: Kaleb S KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/14243 NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Aravinda VK <avishwan@redhat.com> Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> CentOS-regression: Gluster Build System <jenkins@build.gluster.com>
* Leases: Add a server side xlator to handle lease requestsPoornima G2016-04-291-0/+1
| | | | | | | | | | | | | | | | | Before this patch, there was an effort to implement leases in upcall xlator, these patches by Soumya and me can be found @ http://review.gluster.org/#/c/10084/ Change-Id: I926728c7ec690727a8971039b240655882d02059 BUG: 1319992 Signed-off-by: Poornima G <pgurusid@redhat.com> Reviewed-on: http://review.gluster.org/11643 Smoke: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-by: Rajesh Joseph <rjoseph@redhat.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com>
generated by cgit (git 2.34.1) at 2024-04-25 08:42:06 +0000