summaryrefslogtreecommitdiffstats
path: root/extras/Makefile.am
Commit message (Collapse)AuthorAgeFilesLines
* firewall/spec: Create glusterfs firewall service if firewalld installed.anand2015-10-151-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It creates glusterfs firewall service during installation. glusterfs service : It contains all default ports which needs to be opened. During installation glusterfs.xml is copied into firewall service directory(/usr/lib/firewalld/services/). Note: 1.For bricks: It opens the 512 ports, if brick is running out side this range(>49664) then admin need to open the port for that brick. 2.By default this service is not enabled in any of zone. To enable this service(glusterfs) in firewall: 1. Get active zone(s) in node firewall-cmd --get-active-zones 2. Attached this service(glusterfs) to zone(s) firewall-cmd --zone=<zone_name> --add-service=glusterfs --To apply runtime firewall-cmd --permanent --zone=<zone_name> --add-service=glusterfs --To apply permanent Note: we can also use firewall-config which gives GUI to configure firewall. Backport of: >Change-Id: Id97fe620c560fd10599511d751aed11a99ba4da5 >BUG: 1253967 >Signed-off-by: anand <anekkunt@redhat.com> >Reviewed-on: http://review.gluster.org/11989 >Reviewed-by: Niels de Vos <ndevos@redhat.com> >Tested-by: NetBSD Build System <jenkins@build.gluster.org> >Tested-by: Gluster Build System <jenkins@build.gluster.com> >(cherry picked from commit 7f327d3b4f9222995d2ee78862e48ca44c28411c) Change-Id: Iacf44b15ffb176c965c7f3b074065a54cf785dc7 BUG: 1057295 Signed-off-by: anand <anekkunt@redhat.com>; Reviewed-on: http://review.gluster.org/12357 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* build: scripts are not installed with +x bitKaleb S. KEITHLEY2015-07-301-1/+1
| | | | | | | | | | | | | | | | | | | scripts listed in Makefile.am as foo_DATA, should be foo_SCRIPTS to in installed +x backport of > Change-Id: Ib9b98efcea968c03b574726bdc0d4f76cdfd1dc1 > BUG: 1225018 > http://review.gluster.org/#/c/11806/ Change-Id: Ieed45f37a22a0ebd977a0d586874a31901c415e9 BUG: 1223945 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/11807 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Reviewed-by: Jeff Darcy <jdarcy@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* build: fix compiling on older distributionsNiels de Vos2015-06-111-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | data-tiering is disabled on RHEL-5 because it depends on a too new SQLite version. This change also prevents installing some of files that are used by geo-replication, which is also not available on RHEL-5. geo-replication depends on a too recent version of Python. Due to an older version of OpenSSL, some of the newer functions can not be used. A fallback to previous functions is done. Unfortunately RHEL-5 does not seem to have TLSv1.2 support, so only older versions can be used. Cherry picked from commit 0209b18fd65f9df5ebd0a8764ebf864d0d392998: > Change-Id: I672264a673f5432358d2e83b17e2a34efd9fd913 > BUG: 1222317 > Signed-off-by: Niels de Vos <ndevos@redhat.com> > Reviewed-on: http://review.gluster.org/10803 > Tested-by: NetBSD Build System <jenkins@build.gluster.org> > Tested-by: Gluster Build System <jenkins@build.gluster.com> > Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> > Reviewed-by: Vijay Bellur <vbellur@redhat.com> Also including the changes from http://review.gluster.org/11140: > build: improve detection of new OpenSSL features > > Building on Mac OS X revealed that the current check for > CRYPTO_THREADID_set_callback() availability in OpenSSL is not correct. > > There also does not seem to be a guarantee that TLSv1_2_method() is > available when TLS1_2_VERSION is #define'd. > > Change-Id: I21508065fc181a1c74bee4fd6d23bb5bdf7cea7a > BUG: 1222317 > Reviewed-on: http://review.gluster.org/11140 > Original-author: Kaleb KEITHLEY <kkeithle@redhat.com> > Signed-off-by: Niels de Vos <ndevos@redhat.com> Change-Id: I672264a673f5432358d2e83b17e2a34efd9fd913 BUG: 1228510 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/11096 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* scripts: Added script stop-all-gluster-processes.sh in rpmAravinda VK2015-05-311-2/+3
| | | | | | | | | | | | | | | This script was not included as part of rpm. Fixed now BUG: 1225331 Change-Id: I5e559b187253cc2f4f8ea7cf8ec56a32802e5ab2 Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/10931 Reviewed-by: Kotresh HR <khiremat@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/11015 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org>
* Fix case mistake for MKDIR_P in MakefilesEmmanuel Dreyfus2015-04-221-2/+2
| | | | | | | | | | | | | | | | | | | | | Some makefiles used $(mkdir_p) instead of the corectly defined $(MKDIR_P). The former is substituted as an empty string, leading to possible failures depending of the user shell tolerance. NetBSD's /bin/sh seems to choke more easily than Linux's /bin/bash, but if the later does not fail, it does not created the intended directories anyway. Resubmit after rebase in hope that regression test will have less spurious failures. Backport of: I8caed4000f3c91cb3a685453848fb854793945ed BUG: 1212676 Change-Id: I393ffda8aa24bffce86f7b1f19b999ffa30c3562 Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/10279 Tested-by: NetBSD Build System Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* snapshot/scheduling: A cron based scheduler for snapshot schedulingAvra Sengupta2015-03-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | GlusterFS volume snapshot provides point-in-time copy of a GlusterFS volume. Currently, GlusterFS volume snapshots can be easily scheduled by setting up cron jobs on one of the nodes in the GlusterFS trusted storage pool. This has a single point failure (SPOF), as scheduled jobs can be missed if the node running the cron jobs dies. The solution to the above problems is addressed in this patch. The snap_scheduler.py helper script expects the user to install the argparse python module before using it. Further details for the same are available at: http://www.gluster.org/community/documentation/index.php/Features/Scheduling_of_Snapshot Change-Id: I2c357af5b7d3e66f270d20eef50cdeecdcbe15c7 BUG: 1198027 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/9788 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* feature/glusterfind: A tool to find incremental changesAravinda VK2015-03-181-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Documentation is available in patch: http://review.gluster.org/#/c/9800/ A tool which helps to get list of modified files or list of all files in GlusterFS Volume using Changelog or find command. Usage ===== glusterfind --help Create: ------- glusterfind create --help The tool creates status file $GLUSTERD_WORKDIR/SESSION/VOLUME/status and records current timestamp to initiate the session. This timestamp will be used as start time for next runs. As part of create also generates ssh key and distributes to all peers. and enables build.pgfid and changelog using volume set command. Pre: ---- glusterfind pre --help This command is used to generate the list of files modified after session creation time or after last run. To get list of all files/dirs in Volume, run pre command with `--full` argument. The tool gets all nodes details using gluster volume info and runs node agent for each brick in respective nodes via ssh command. Once these node agents generate the output file, tool copies to local using scp. Merges all the output files to generate the final output file. Post: ----- glusterfind post --help After consuming the list, this sub command is called to update the session time based on pre command status file. List: ----- glusterfind list --help To view all the sessions Delete: ------- glusterfind delete --help Delete session. Known Issues ------------ 1. Deleted files will not get listed, since we can't convert GFID to Path if file/dir is deleted. 2. Only new name will get listed if Renamed. 3. All hardlinks will get listed. Change-Id: I82991feb0aea85cb6ec035fddbf80a2b276e86b0 BUG: 1193893 Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/9682 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Reviewed-by: Prashanth Pai <ppai@redhat.com> Reviewed-by: Kotresh HR <khiremat@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* NFS-Ganesha: Install scripts, config files, and resource agent scriptsKaleb S. KEITHLEY2015-03-171-1/+1
| | | | | | | | | | | | | | | | | Resubmitting after a gerrit bug bungled the merge of http://review.gluster.org/9621 (was it really a gerrit bug?) Scripts related to NFS-Ganesha are in extras/ganesha/scripts. Config files are in extras/ganesha/config. Resource Agent files are in extras/ganesha/ocf Files are copied to appropriate locations. Change-Id: I137169f4d653ee2b7d6df14d41e2babd0ae8d10c BUG: 1188184 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/9912 Tested-by: Gluster Build System <jenkins@build.gluster.com>
* build: add a tmpfiles.d config file for /run/glusterNiels de Vos2015-01-191-0/+5
| | | | | | | | | | | | | | | | | | New distrubutions have a /run directory on a volatile tmpfs filesystem. This causes /run/gluster to be removed with each reboot. A tmpfiles.d configuration is used to create the directory on boot. EL5 and EL-6 do not use /run, current Fedora versions do. By checking %{_tmpfilesdir} in the .spec, we can identify if the distribution uses tmpfiles.d. Change-Id: I231e7d6603d573cb905246558e14a51577c0eb56 BUG: 1182934 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9458 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Lalatendu Mohanty <lmohanty@redhat.com>
* build: only install geo-rep scripts when enabledNiels de Vos2014-12-071-1/+1
| | | | | | | | | | | | | | When geo-replication is not enabled, the related scripts should not get installed. EPEL-5 does not support geo-replication, and the installed but unpackaged scripts cause rebuilding for .el5 to fail. BUG: 1169005 Change-Id: I1b6a352b73bd1ed1c5b330f54e26e81aed9a5a4e Reported-by: Lalatendu Mohanty <lmohanty@redhat.com> Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9221 Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* osx: Remove legacy extras/MacOSX directoryJustin Clift2014-09-151-6/+6
| | | | | | | | | | BUG: 1141682 Change-Id: Ic84171b070985a11b70d4548aa5e507a121d2164 Signed-off-by: Justin Clift <justin@gluster.org> Reviewed-on: http://review.gluster.org/8736 Reviewed-by: Harshavardhana <harsha@harshavardhana.net> Tested-by: Harshavardhana <harsha@harshavardhana.net> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* build: make GLUSTERD_WORKDIR rely on localstatedirHarshavardhana2014-08-071-2/+2
| | | | | | | | | | | | | | | | | | | | | | - Break-way from '/var/lib/glusterd' hard-coded previously, instead rely on 'configure' value from 'localstatedir' - Provide 's/lib/db' as default working directory for gluster management daemon for BSD and Darwin based installations - loff_t is really off_t on Darwin - fix-off the warnings generated by clang on FreeBSD/Darwin - Now 'tests/*' use GLUSTERD_WORKDIR a common variable for all platforms. - Define proper environment for running tests, define correct PATH and LD_LIBRARY_PATH when running tests, so that the desired version of glusterfs is used, regardless where it is installed. (Thanks to manu@netbsd.org for this additional work) Change-Id: I2339a0d9275de5939ccad3e52b535598064a35e7 BUG: 1111774 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/8246 Tested-by: Gluster Build System <jenkins@build.gluster.com>
* extras: bash command completion for glusterVarun Shastry2014-06-131-2/+4
| | | | | | | | | | Change-Id: Ifd6e68b0288dc65e41e467b4ad02bfc3bded341f BUG: 1108767 Signed-off-by: Varun Shastry <vshastry@redhat.com> Reviewed-on: http://review.gluster.org/7979 Reviewed-by: Lalatendu Mohanty <lmohanty@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Add upgrade scripts for quotaKrutika Dhananjay2014-04-171-1/+4
| | | | | | | | | Change-Id: I289662300d32f75e2fc6e789037c3224054a38a5 BUG: 969461 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/7418 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* build: Install /var/lib/glusterd/groups/virt by defaultNiels de Vos2014-01-211-7/+10
| | | | | | | | | | | | | | | | /var/lib/glusterd/groups/virt is not installed by default, but that should be the case. It is provided as extras/groups-virt.example. "make install" should correctly install this file, and the rpm packages should include it. Change-Id: I5284306cfc2882e3147bd72f496ad29db906fcb2 BUG: 1053854 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/6717 Reviewed-by: Harshavardhana <harsha@harshavardhana.net> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* features/quota: Metadata cleanupVarun Shastry2014-01-161-6/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Quota and marker uses 'trusted.glusterfs.quota*' and 'trusted.pgfid*' xattrs to store its configurations and accounting information and also to build the parent inode chain in case of absense of path. Problem: After disabling and then enabling quota back, the xattrs may contain stale data leading to impaired accounting and thus improper enforcement. Solution: Clean up all the quota related xattrs after quota disable. Marker xlator implements a virtual xattr to cleanup quota and pgfid xattrs. In this approach glusterd mounts an auxiliary mount and sends the below command to all the files by crawling the mountpoint. #setfattr -n "glusterfs.quota-xattr-cleanup" -v 1 <path/to/file> Credit: Krishnan Parthasarathi <kparthas@redhat.com> Varun Shastry <vshastry@redhat.com> Change-Id: I9380eca58a285dc27dd572de1767aac8f2cd8049 BUG: 969461 Signed-off-by: Varun Shastry <vshastry@redhat.com> Reviewed-on: http://review.gluster.org/6369 Reviewed-by: Raghavendra G <rgowdapp@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* geo-rep: logrotate: Logrotate handlingAravinda VK2013-10-031-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In existing georep logrotate was implemented by handling SIGSTOP and SIGCONT, gsyncd was failing to start again after SIGSTOP. New approach uses WatchedFileHandler in logging, which tracks the log file changes or logrotate. Reopens the log file if logrotate is triggered or if same log file is updated from other process. As per python doc: http://docs.python.org/2/library/logging.handlers.html: The WatchedFileHandler class, located in the logging.handlers module, is a FileHandler which watches the file it is logging to. If the file changes, it is closed and reopened using the file name. A file change can happen because of usage of programs such as newsyslog and logrotate which perform log file rotation. This handler, intended for use under Unix/Linux, watches the file to see if it has changed since the last emit. (A file is deemed to have changed if its device or inode have changed.) If the file has changed, the old file stream is closed, and the file opened to get a new stream. Change-Id: I30f65eb1e9778b12943d6e43b60a50344a7885c6 BUG: 1012776 Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/5968 Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Harshavardhana <harsha@harshavardhana.net> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* doc: Move glusterd.vol to extras/ directoryLubomir Rintel2013-08-221-1/+4
| | | | | | | | | | It's actually not documentation. Change-Id: I30c84abc9a31edb2f849dd2d6ff6d3129d87392d Signed-off-by: Lubomir Rintel <lubo.rintel@gooddata.com> Reviewed-on: http://review.gluster.org/5474 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* log: add logger.conf.example fileBala.FA2013-08-141-2/+3
| | | | | | | | | | | | This example file can be safely renamed as logger.conf to enable syslog logging Change-Id: If49dd6002a046915b2eca330b7a539f4fa1f94fa BUG: 928648 Signed-off-by: Bala.FA <barumuga@redhat.com> Reviewed-on: http://review.gluster.org/5622 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* log: add rsyslog gluster configuration fileBala.FA2013-08-131-2/+3
| | | | | | | | | | | | | This patch comes with rsyslog gluster configuration file for fedora and rhel >= 6. It disables syslog at rpm build time if targetted platform is rhel < 6 as there is no rsyslog support. Change-Id: I95c076874b6891ff08dee1b35980f95529fb0f37 BUG: 928648 Signed-off-by: Bala.FA <barumuga@redhat.com> Reviewed-on: http://review.gluster.org/5543 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* gsyncd: distribute the crawling loadAvra Sengupta2013-07-261-1/+1
| | | | | | | | | | | | | | | | | | | * also consume changelog for change detection. * Status fixes * Use new libgfchangelog done API * process (and sync) one changelog at a time Change-Id: I24891615bb762e0741b1819ddfdef8802326cb16 BUG: 847839 Original Author: Csaba Henk <csaba@redhat.com> Original Author: Aravinda VK <avishwan@redhat.com> Original Author: Venky Shankar <vshankar@redhat.com> Original Author: Amar Tumballi <amarts@redhat.com> Original Author: Avra Sengupta <asengupt@redhat.com> Signed-off-by: Avra Sengupta <asengupt@redhat.com> Reviewed-on: http://review.gluster.org/5131 Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* build: sync glusterfs.spec.in with Fedora glusterfs.specKaleb S. KEITHLEY2013-06-261-2/+2
| | | | | | | | | | | | | | | | | | | | | | * add glusterfs-api and glusterfs-api-devel sub-packages * add extras/systemd/glusterd.service. Use it (or extras/init.d/glusterd) instead of the Fedora versions. * restores ability to build glusterfs RPMs from the dist tarball with 'rpmbuild {-ts,-tb,-ta} glusterfs-XXX.tar.gz' * other minor cleanups mostly to sync with fedora .spec and to build from the dist tarball. Any differences will be resolved in the fedora .spec in the next release (i.e. beta4 or GA). (still considering whether to add fedora glusterfsd.{init,service} files to glusterfs or remove them from fedora.) BUG: 950083 Change-Id: Ibda3cd57b24ef5c2a27446703e718e5044ec546c Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/5230 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Bala FA <barumuga@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* glusterfs.spec.in: resync with Fedora glusterfs.specKaleb S. KEITHLEY2013-02-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | Resync with Fedora's glusterfs.spec, being careful to preserve recent additions to the glusterfs.spec.in such as the package-config for -devel and the OCF sub-package To build a set of RPMs: % ./autogen.sh % ./configure --enable-fusermount % make dist % cd extras/LinuxRPM && make glusterrpms Updated rpm.t, hopefully build system has all the dependencies to build UFO BUG: 819130 Change-Id: I1b1c161337ad780cf7d3ab401fa1b10648f38cbd Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/4454 Reviewed-by: Peter Portante <pportant@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* Respect autotools docdir variableKacper Kowalik (Xarthisius)2013-02-071-2/+1
| | | | | | | | | Change-Id: If20d0806a925b880e0ba9bbc66604cae6c51ce6b BUG: 859861 Signed-off-by: Kacper Kowalik (Xarthisius) <xarthisius.kk@gmail.com> Reviewed-on: http://review.gluster.org/3971 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* build: include OCF resource agents by default and package themNiels de Vos2012-12-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | This change introduces a glusterfs-resource-agents sub-package that contains the Open Cluster Framework (OCF) Resource Agents (RA). It also changes the build infrastructure to include the RA by default, making them available for anyone who is interested in using them with a OCF compatible Hight-Availability solution like Pacemaker. Build the RPMs without RA: $ make dist && rpmbuild -ta --without ocf *.gz Build the RPMs with RA (default): $ make dist && rpmbuild -ta *.gz There is no need to run ./autogen.sh from within the .spec, the whole autotools infrastructure is included in the 'make dist' tarball already. This also adds a test-case which builds the rpms with mock for the latest two EPEL releases. Change-Id: I12ef5f30f466868825352376156fb4e56b135c58 BUG: 869559 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/4130 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* RHEL init script: ability to overwrite options from sysconfigFilip Pytloun2012-12-121-1/+1
| | | | | | | | | Change-Id: I15df0aef73e097a9ccfb00e2d4cae81d3a5a82fc BUG: 885739 Signed-off-by: Filip Pytloun <filip.pytloun@gooddata.com> Reviewed-on: http://review.gluster.org/4290 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Niels de Vos <ndevos@redhat.com>
* Added virt group file - template for 'group' setKrishnan Parthasarathi2012-12-111-1/+2
| | | | | | | | | | | | | | | | | | - This sample file contains the set of volume options that are associated with volumes that would be used to store VMs. - To enable the set of options present in this file one must do the following, - # cp extras/group-virt.example /var/lib/glusterd/groups/<group-name> # gluster volume set <volume-name> group <group-name> Change-Id: I8848d3d222ce114900db885aeef2f20c83ece28c BUG: 851237 Signed-off-by: Krishnan Parthasarathi <kparthas@redhat.com> Reviewed-on: http://review.gluster.org/4232 Reviewed-by: Anand Avati <avati@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* Add OCF compliant resource agents for glusterd and volumesFlorian Haas2012-10-241-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These resource agents plug glusterd into Open Cluster Framework (OCF) compliant cluster resource managers, like Pacemaker. The glusterd RA is fairly trivial; it simply manages the glusterd daemon like any upstart or systemd job would, except that Pacemaker can do it in a cluster-aware fashion. The volume RA is a bit more involved; It starts a volume and monitors individual brick's daemons in a cluster aware fashion, recovering bricks when their processes fail. Note that this does NOT imply people would deploy GlusterFS servers in pairs, or anything of that nature. Pacemaker has the ability to deploy cluster resources as clones, meaning glusterd and volumes would be configured as follows in a Pacemaker cluster: primitive p_glusterd ocf:glusterfs:glusterd \ op monitor interval="30" primitive p_volume_demo ocf:glusterfs:volume \ params volname="demo" \ op monitor interval="10" clone cl_glusterd p_glusterd \ meta interleave="true" clone cl_volume_demo p_volume_demo \ meta interleave="true" ordered="true" colocation c_volume_on_glusterd inf: cl_volume_demo cl_glusterd order o_glusterd_before_volume 0: cl_glusterd cl_volume_demo The cluster status then looks as follows (in a 4-node cluster; note the configuration above could be applied, unchanged, to a cluster of any number of nodes): ============ Last updated: Fri Mar 30 10:54:50 2012 Last change: Thu Mar 29 17:20:17 2012 via crmd on gluster02.h Stack: openais Current DC: gluster03.h - partition with quorum Version: 1.1.6-3.el6-a02c0f19a00c1eb2527ad38f146ebc0834814558 4 Nodes configured, 4 expected votes 8 Resources configured. ============ Online: [ gluster02.h gluster03.h gluster04.h gluster01.h ] Clone Set: cl_glusterd [p_glusterd] Started: [ gluster02.h gluster03.h gluster04.h gluster01.h ] Clone Set: cl_volume_demo [p_volume_demo] Started: [ gluster01.h gluster02.h gluster03.h gluster04.h ] This is also a way of providing automatic glusterd and brick recovery in systems where neither upstart nor systemd are available. Change-Id: Ied46657bdfd2dd72dc97cf41b0eb7adcecacd18f BUG: 869559 Signed-off-by: Florian Haas <florian@hastexo.com> Reviewed-on: http://review.gluster.org/3043 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* build: Install glusterfs-logrotate as config fileVijay Bellur2012-09-251-0/+3
| | | | | | | | | Change-Id: I8255eb4249503eac0add87444da934256faffc01 BUG: 860037 Reviewed-on: http://review.gluster.org/3973 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Anand Avati <avati@redhat.com>
* extras: install clear_xattrs.shNiels de Vos2012-07-121-1/+1
| | | | | | | | | | | | The script was not installed by default, this breaks building the RPM packages since Change-Id Iba695a6d19389fbc1776da5e939d67318916aadf. Change-Id: I4fb982cb5217dc7b3ec3c7a664dd3997a2e05170 BUG: 812214 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.com/3659 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Anand Avati <avati@redhat.com>
* glusterfs.spec: Added hook-scripts in server rpmv3.3.0qa38Krishnan Parthasarathi2012-04-231-2/+1
| | | | | | | | | | Change-Id: Idd0ed2a72ea9ec947eaf142b889730e8d4be63c1 BUG: 806996 Signed-off-by: Krishnan Parthasarathi <kp@gluster.com> Reviewed-on: http://review.gluster.com/3211 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Amar Tumballi <amarts@redhat.com> Reviewed-by: Vijay Bellur <vijay@gluster.com>
* add 'logrotate' config file to the packageAmar Tumballi2011-05-041-1/+4
| | | | | | | | Signed-off-by: Amar Tumballi <amar@gluster.com> Signed-off-by: Anand Avati <avati@gluster.com> BUG: 2053 (We need to support the standard *nix 'logrotate' for server and client log files.) URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=2053
* extras: scripts to cleanup xattrs stored by quota.Raghavendra G2011-04-071-1/+1
| | | | | | | | Signed-off-by: Raghavendra G <raghavendra@gluster.com> Signed-off-by: Vijay Bellur <vijay@gluster.com> BUG: 2664 (Quota: recreating the volume on same bricks shows similar info as for earlier one using "list") URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=2664
* removed some of the stale scriptsAmar Tumballi2011-02-101-4/+2
| | | | | | | | Signed-off-by: Amar Tumballi <amar@gluster.com> Signed-off-by: Anand V. Avati <avati@dev.gluster.com> BUG: 2393 ('gluster-volgen' and 'gluster-defrag' scripts are stale, but present in AMI) URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=2393
* Changes for Dynamic Volume ManagementVijay Bellur2010-07-221-1/+1
| | | | | | | | | Signed-off-by: Amar Tumballi <amar@gluster.com> Signed-off-by: Vijay Bellur <vijay@gluster.com> Signed-off-by: Anand V. Avati <avati@dev.gluster.com> BUG: 1196 () URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=1196
* proper way to do defrag of a mountpointAmar Tumballi2010-07-141-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Usage: "glusterfs-defrag <MOUNTPOINT>" there are new features added to distribute with this patch: * bash# getfattr -n trusted.distribute.linkinfo <file> Gives output in the format "<hostname>:<directory>", if there is a linkfile present, where hostname is server, directory is backend directory where the actual linkfile is present. * bash# getfattr -n trusted.glusterfs.pathinfo <path> Gives layout information if directory, and info about actual location of file in backend servers, in the form of 'hostname:directory'. (TODO: should extend it to all xlators) * bash# getfattr -n trusted.distribute.fix.layout <path> scales out the directory layout in distribute, so when new servers are added, layouts are fixed to include them. * removed 'scale-n-defrag.sh' as its no more required. * changed 'defrag.sh' to have a feature to specify target bricks, so defrag happens to only those nodes. moved the file to 'glusterfs-defrag', which now gets installed to '${prefix}/bin' * storage/posix: takes new option 'hostname' so it can resolve to same hostname given during 'gluster volume create'. with 'trusted.glusterfs.pathinfo' posix returns the value in 'hostname:real_path' format. Signed-off-by: Amar Tumballi <amar@gluster.com> Signed-off-by: Anand V. Avati <avati@dev.gluster.com> BUG: 1073 ('gluster defrag <VOLNAME>' fails in mainline) URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=1073
* extras: Add script to be used before using quota translator.Pavan Sondur2010-03-091-1/+1
| | | | | | | | Signed-off-by: Pavan Vilas Sondur <pavan@gluster.com> Signed-off-by: Anand V. Avati <avati@dev.gluster.com> BUG: 569 (Memory leak in quota translator) URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=569
* extras: Add defrag scripts to the repositoryPavan Sondur2010-01-191-1/+1
| | | | | | | | Signed-off-by: Pavan Vilas Sondur <pavan@gluster.com> Signed-off-by: Anand V. Avati <avati@dev.gluster.com> BUG: 478 (Add defrag scripts into glusterfs) URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=478
* Volgen supporting multidisks and booster configuration for nfs and cifsHarshavardhana Ranganath2009-11-261-7/+1
| | | | | | | | Signed-off-by: Harshavardhana <harsha@gluster.com> Signed-off-by: Anand V. Avati <avati@dev.gluster.com> BUG: 396 (Volgen multiple export directory support) URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=396
* Add glusterfs-volgen to master, change fusermount options and other changes ↵Pavan Sondur2009-11-111-1/+5
| | | | | | | | | | | | | | | | to rpm spec file. The patch has the following changes: * Rename glusterfs-volgen.py and include it in the rpm spec file * Enable fusermount by default. Change fusermount configure option from disable to enable. * Remove BDB from configure.ac, essentially removing it from the normal build. * Remove all dependencies on fuse in the rpm spec file. Signed-off-by: Pavan Vilas Sondur <pavan@gluster.com> Signed-off-by: Anand V. Avati <avati@dev.gluster.com> BUG: 343 (Placeholder bug for adding volgen into rpm, bdb makefile changes, etc) URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=343
* Add glusterfs-volgen to masterPavan Sondur2009-10-281-1/+1
| | | | | | | Signed-off-by: Anand V. Avati <avati@dev.gluster.com> BUG: 343 (GlusterFS volume generator - 'volgen') URL: http://bugs.gluster.com/cgi-bin/bugzilla3/show_bug.cgi?id=343
* backend-xattr-sanitize.sh: script added to extras/Anand V. Avati2009-05-071-1/+1
| | | | | | | | Run the script as: sh$ ./backend-xattr-sanitize.sh /data/export0 and it will remove all the known stale xattrs on the backend files and dirs
* minor build fix - set EXTRA_DIST to point to MacOSX/Portfile instead of PortfileAnand V. Avati2009-04-231-1/+1
|
* added migration script from unify based setup to distribute based setupAmar Tumballi2009-04-181-1/+1
| | | | Signed-off-by: Anand V. Avati <avati@amp.gluster.com>
* Removed unncessary EXTRA_DIST entries and updated benchmarking directoryHarshavardhana2009-02-281-5/+3
| | | | Signed-off-by: Anand V. Avati <avati@amp.gluster.com>
* Added all filesVikas Gorur2009-02-181-0/+13
generated by cgit (git 2.34.1) at 2024-04-23 20:52:44 +0000