summaryrefslogtreecommitdiffstats
path: root/configure.ac
Commit message (Collapse)AuthorAgeFilesLines
* build: systemd unit should not be marked executableNiels de Vos2016-08-121-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | systemd complains about the unit for GlusterD when it is executable: Configuration file /usr/lib/systemd/system/glusterd.service is marked executable. Please remove executable permission bits. Proceeding anyway. The Makefile that installs the unit has some scripted commands. These are not needed and standard "*dir" and "*DATA" postfixes for variables can be used instead. The EXTRA_DIST variable is needed for building the 'make dist' tarball on systems where there is no systemd. The unit would be missing from the tarball if it is not explicitly included. Cherry picked from commit 9f22282795e20fd62b22847b92dffd0cde9cca1b: > BUG: 1354489 > Change-Id: I5e72ec201036906b9b2458bc8931ccebf9a8c6b4 > Reported-by: Sergej Pupykin <ml@sergej.pp.ru> > Signed-off-by: Niels de Vos <ndevos@redhat.com> > Reviewed-on: http://review.gluster.org/14892 > Smoke: Gluster Build System <jenkins@build.gluster.org> > Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Change-Id: I5e72ec201036906b9b2458bc8931ccebf9a8c6b4 BUG: 1354476 Reported-by: Sergej Pupykin <ml@sergej.pp.ru> Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/15116 Smoke: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org>
* configure: Prevent glupy installation outside $prefixNiels de Vos2016-06-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | glupy was installed in the global path outside the prefix path, even if --prefix is passed. ./configure --prefix=/usr/local make install Expected: ${DESTDIR}${prefix}/lib64/python<VERSION>/site-packages/gluster Actual: ${DESTDIR}/usr/lib64/python<VERSION>/site-packages/gluster prefix was not honoured. With this patch, glupy will be installed inside the prefix path. Cherry picked from commit 85de0c83392d861ba47c97664ff73fd7f8705a3a: > BUG: 1335717 > Change-Id: I810dd8d2d6c403540d4b738f5ab54237c7358bf6 > Signed-off-by: Aravinda VK <avishwan@redhat.com> > Reviewed-on: http://review.gluster.org/14315 > Smoke: Gluster Build System <jenkins@build.gluster.com> > Reviewed-by: Niels de Vos <ndevos@redhat.com> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > Reviewed-by: Jeff Darcy <jdarcy@redhat.com> > CentOS-regression: Gluster Build System <jenkins@build.gluster.com> BUG: 1336137 Change-Id: I810dd8d2d6c403540d4b738f5ab54237c7358bf6 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/14340 Smoke: Gluster Build System <jenkins@build.gluster.org> Tested-by: Anoop C S <anoopcs@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* build: Filter -D_FORTIFY_SOURCE from CFLAGSNiels de Vos2016-06-291-75/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | | We use python-config to get recommended CFLAGS. It provides -D_FORTIFY_SOURCE=2 by default that conflicts with our --enable-debug option or a developer provided no-optimization option. Hence, filter it out from default CFLAGS. Cherry picked from commit 5e65701f2660d1be101da81bffea7721d4f9ece0: > Change-Id: Id80196baeb55415b1ea334e7b17143e56dfbadb3 > BUG: 1283948 > Co-authored-by: Kaleb S KEITHLEY <kkeithle@redhat.com> > Signed-off-by: Raghavendra Talur <rtalur@redhat.com> > Reviewed-on: http://review.gluster.org/12707 > Smoke: Gluster Build System <jenkins@build.gluster.com> > CentOS-regression: Gluster Build System <jenkins@build.gluster.com> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Change-Id: Id80196baeb55415b1ea334e7b17143e56dfbadb3 BUG: 1336137 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/14339 Smoke: Gluster Build System <jenkins@build.gluster.org> Tested-by: Anoop C S <anoopcs@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* build: place glupy under $prefix while installingNiels de Vos2016-06-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Regression testing on FreeBSD fails due to this error: --- install-pyglupyPYTHON --- /usr/home/jenkins/root/workspace/freebsd-smoke/install-sh -c -d '/usr/local/lib/python2.7/site-packages/gluster/glupy' mkdir: /usr/local/lib/python2.7/site-packages/gluster: Permission denied mkdir: /usr/local/lib/python2.7/site-packages/gluster: Permission denied *** [install-pyglupyPYTHON] Error code 1 The installation prefix is set to "/build/install" and glupy should be placed there as well. The default to "/usr/local" is incorrect. Cherry picked from commit a34c406445fc0294de41a8e4706f106a83e136a0: > Change-Id: I166412a271576f2344aecec94c7835f0fe9b1cf3 > BUG: 1198849 > Signed-off-by: Niels de Vos <ndevos@redhat.com> > Reviewed-on: http://review.gluster.org/13208 > Smoke: Gluster Build System <jenkins@build.gluster.com> > NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> > CentOS-regression: Gluster Build System <jenkins@build.gluster.com> > Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Change-Id: I166412a271576f2344aecec94c7835f0fe9b1cf3 BUG: 1336137 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/14338 Smoke: Gluster Build System <jenkins@build.gluster.org> Tested-by: Aravinda VK <avishwan@redhat.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> CentOS-regression: Gluster Build System <jenkins@build.gluster.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* geo-rep: Fix gluster binary invocation while running as cronAravinda VK2016-05-101-0/+17
| | | | | | | | | | | | | | | | | | When scheduler script was executed as cron, it was unable to detect the Gluster binaries. BUG: 1331924 Change-Id: Ic9c533586ed9a472765f69aa2f87d004c46d4340 Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/14111 CentOS-regression: Gluster Build System <jenkins@build.gluster.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> NetBSD-regression: NetBSD Build System <jenkins@build.gluster.org> Smoke: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com> (cherry picked from commit 80e3832ec16f69d4184172cfc9afa9e42533e0ef) Reviewed-on: http://review.gluster.org/14122 Reviewed-by: Kotresh HR <khiremat@redhat.com>
* build: fix ecdh.h and dh.h depsMilind Changire2015-11-201-0/+4
| | | | | | | | | | | | | | | | | | | | | | openssl/ecdh.h and openssl/dh.h are not available on all platforms, especially rhel-5. This patch adds check to autoconf and updates relevant source files. Added conditional to test for SSL_OP_NO_TICKET and SSL_OP_NO_COMPRESSION presence before setting the SSL context options. Macros UTIME_OMIT and UTIME_NOW picked up from Fedora 22 /usr/include/bits/stat.h to help rhel-5 build. Change-Id: I2bdee4fe643f9c1f5fe77cf89bd30946cd6b591a Reviewed-on: http://review.gluster.org/#/c/12517/ BUG: 1258594 Signed-off-by: Milind Changire <mchangir@redhat.com> Reviewed-on: http://review.gluster.org/12518 Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* firewall/spec: Create glusterfs firewall service if firewalld installed.anand2015-10-151-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It creates glusterfs firewall service during installation. glusterfs service : It contains all default ports which needs to be opened. During installation glusterfs.xml is copied into firewall service directory(/usr/lib/firewalld/services/). Note: 1.For bricks: It opens the 512 ports, if brick is running out side this range(>49664) then admin need to open the port for that brick. 2.By default this service is not enabled in any of zone. To enable this service(glusterfs) in firewall: 1. Get active zone(s) in node firewall-cmd --get-active-zones 2. Attached this service(glusterfs) to zone(s) firewall-cmd --zone=<zone_name> --add-service=glusterfs --To apply runtime firewall-cmd --permanent --zone=<zone_name> --add-service=glusterfs --To apply permanent Note: we can also use firewall-config which gives GUI to configure firewall. Backport of: >Change-Id: Id97fe620c560fd10599511d751aed11a99ba4da5 >BUG: 1253967 >Signed-off-by: anand <anekkunt@redhat.com> >Reviewed-on: http://review.gluster.org/11989 >Reviewed-by: Niels de Vos <ndevos@redhat.com> >Tested-by: NetBSD Build System <jenkins@build.gluster.org> >Tested-by: Gluster Build System <jenkins@build.gluster.com> >(cherry picked from commit 7f327d3b4f9222995d2ee78862e48ca44c28411c) Change-Id: Iacf44b15ffb176c965c7f3b074065a54cf785dc7 BUG: 1057295 Signed-off-by: anand <anekkunt@redhat.com>; Reviewed-on: http://review.gluster.org/12357 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: NetBSD Build System <jenkins@build.gluster.org> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* build: fix compiling on older distributionsNiels de Vos2015-06-111-19/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | data-tiering is disabled on RHEL-5 because it depends on a too new SQLite version. This change also prevents installing some of files that are used by geo-replication, which is also not available on RHEL-5. geo-replication depends on a too recent version of Python. Due to an older version of OpenSSL, some of the newer functions can not be used. A fallback to previous functions is done. Unfortunately RHEL-5 does not seem to have TLSv1.2 support, so only older versions can be used. Cherry picked from commit 0209b18fd65f9df5ebd0a8764ebf864d0d392998: > Change-Id: I672264a673f5432358d2e83b17e2a34efd9fd913 > BUG: 1222317 > Signed-off-by: Niels de Vos <ndevos@redhat.com> > Reviewed-on: http://review.gluster.org/10803 > Tested-by: NetBSD Build System <jenkins@build.gluster.org> > Tested-by: Gluster Build System <jenkins@build.gluster.com> > Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> > Reviewed-by: Vijay Bellur <vbellur@redhat.com> Also including the changes from http://review.gluster.org/11140: > build: improve detection of new OpenSSL features > > Building on Mac OS X revealed that the current check for > CRYPTO_THREADID_set_callback() availability in OpenSSL is not correct. > > There also does not seem to be a guarantee that TLSv1_2_method() is > available when TLS1_2_VERSION is #define'd. > > Change-Id: I21508065fc181a1c74bee4fd6d23bb5bdf7cea7a > BUG: 1222317 > Reviewed-on: http://review.gluster.org/11140 > Original-author: Kaleb KEITHLEY <kkeithle@redhat.com> > Signed-off-by: Niels de Vos <ndevos@redhat.com> Change-Id: I672264a673f5432358d2e83b17e2a34efd9fd913 BUG: 1228510 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/11096 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* glupy: remove debug test in libpython runtime search path detectionEmmanuel Dreyfus2015-05-091-1/+1
| | | | | | | | | | | | | | | | | | A configure test was recently added to add libpython runtime search path to glupy.so xlator. The vesion committed was a debug test, it searched pythonxx and not python to check for failure. Fix by removing the xx debug test in python's name. Backport of: I7b691be17fc2a2c812f68710869b1a9a85ced84c Change-Id: I518f369c320dcd5cddbdcfe9d25d27af2e0dc929 Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> BUG: 1212676 Reviewed-on: http://review.gluster.org/10733 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: NetBSD Build System Tested-by: Gluster Build System <jenkins@build.gluster.com>
* glupy: fix tuntime search path and python module directory layoEmmanuel Dreyfus2015-05-071-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | ut 1) The glupy.so xlator should embed the runtime search path for the python libraries. Unfortunately, python-config does not gives the appprioate flags, therefore we need to also use pkg-config to obtain them 2) Fix the glupy python module directory layout so that python can import the module without problem That two fixes seems to let glupy.t pass on NetBSD again. Backport of: I397aa726ab8bf7d91fa0d6d870a30910a5f4a5d9 BUG: 1212676 Change-Id: Ie48916d71f0f1a357d65c3c22b5e7d7276d720db Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/10650 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Tested-by: NetBSD Build System Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* build: configure: automake defaults to max filename length=99 charsKaleb S. KEITHLEY2015-04-271-1/+1
| | | | | | | | | | | | | | | | | | | | automake's default rule for making tar files invokes tar with options to use Unix V7 tar file format, which has a maximum FQ pathname length of 99 characters. Some of the new tests in .../tests/bugs/... have names that are longer than 99 chars. These files are dropped from the dist tarfile. automake can be configured to use a newer (POSIX 2001) tar format that does not have limits on the length of file names. Change-Id: I8c178880ebce7d83277ba2ee133f161036958785 BUG: 1215488 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/10393 Tested-by: NetBSD Build System Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Justin Clift <justin@gluster.org> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* build: correct the version in glusterfs-api.pcNiels de Vos2015-04-241-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | The version in glusterfs-api.pc has moved backwards, breaking existing versioned dependencies in QEMU. The following table contains the GlusterFS version and the version for glusterfs-api.pc: .------------------------. | GlusterFS | pkg-config | |-----------+------------| | 3.4.x | 4.3.4.x | | 3.5.x | 6.3.5.x | | 3.6.x | 7.3.6.x | | 3.7.x | 7.3.7.x | | master | 7.x.y.z | '------------------------' BUG: 1211837 Change-Id: I62168a0ab4f0c78e61987371ae75a0d2dd56ced8 URL: http://thread.gmane.org/gmane.comp.emulators.qemu/330176 Reported-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/10309 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: NetBSD Build System Reviewed-by: Vijay Bellur <vbellur@redhat.com> Tested-by: Vijay Bellur <vbellur@redhat.com>
* configure.ac: print yes/no instead of 1/0 in outputRaghavendra Talur2015-04-131-1/+3
| | | | | | | | | | | | | | | | POSIX_ACLS support in output of configure shows 0/1 instead of no/yes. Added BUILD_POSIX_ACLS to make value consistent. Change-Id: Ife728d0d03ff0eb03d4389fefc04507a76205ccd BUG: 1185654 Signed-off-by: Raghavendra Talur <rtalur@redhat.com> Reviewed-on: http://review.gluster.org/9848 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: NetBSD Build System
* build: make contrib/uuid dependency optionalNiels de Vos2015-04-101-12/+24
| | | | | | | | | | | | | | | | | | | On Linux systems we should use the libuuid from the distribution and not bundle and statically link the contrib/uuid/ bits. libglusterfs/src/compat-uuid.h has been introduced and should become an abstraction layer for different UUID APIs. Non-Linux operating systems should implement their compatibility layer there. Once all operating systems have an implementation in compat-uuid.h, we can remove contrib/uuid/ from the repository completely. Change-Id: I345e5357644be2521685e00358bb8c83c4ea0577 BUG: 1206587 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/10129 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* build: require cmocka >= 1.0.1Niels de Vos2015-03-311-8/+3
| | | | | | | | | | | | | | | | | Our mem-pool unit test does a funky realloc(ptr, 0) as an alternative to free(ptr). cmocka 1.0.0 has a bug where this is not handled correctly and thinks to detect a memory leak. The next cmocka release will have this bug fixed, making our unit tests require cmocka >= 1.0.1. URL: https://cmocka.org/archive/cmocka/2015-02/0000059.html Change-Id: I3d7f9b4cf7ace3f958158425ecbcc8f176579122 BUG: 1067059 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9801 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Andreas Schneider <asn@fedoraproject.org> Tested-by: Andreas Schneider <asn@fedoraproject.org> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* build:change dependency for librdmacm to version >= 1.0.15Mohammed Rafi KC2015-03-301-0/+7
| | | | | | | | | | | | | Thanks to Niels for the fix Change-Id: I0954b6f498461dde2b986da9e0e45775175249c9 BUG: 1206744 Signed-off-by: Mohammed Rafi KC <rkavunga@redhat.com> Reviewed-on: http://review.gluster.org/10028 Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* features/bit-rot: Implementation of bit-rot xlatorVenky Shankar2015-03-241-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is the "Signer" -- responsible for signing files with their checksums upon last file descriptor close (last release()). The event notification facility provided by the changelog xlator is made use of. Moreover, checksums are as of now SHA256 hash of the object data and is the only available hash at this point of time. Therefore, there is no special "what hash to use" type check, although it's does not take much to add various hashing algorithms to sign objects with. Signatures are stored in extended attributes of the objects along with the the type of hashing used to calculate the signature. This makes thing future proof when other hash types are added. The signature infrastructure is provided by bitrot stub: a little piece of code that sits over the POSIX xlator providing interfaces to "get or set" objects signature and it's staleness. Since objects are signed upon receiving release() notification, pre-existing data which are "never" modified would never be signed. To counter this, an initial crawler thread is spawned The crawler scans the entire brick for objects that are unsigned or "missed" signing due to the server going offline (node reboots, crashes, etc..) and triggers an explicit sign. This would also sign objects when bit-rot is enabled for a volume and/or after upgrade. Change-Id: I1d9a98bee6cad1c39c35c53c8fb0fc4bad2bf67b BUG: 1170075 Original-Author: Raghavendra Bhat <raghavendra@redhat.com> Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/9711 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Bitrot StubVenky Shankar2015-03-241-0/+3
| | | | | | | | | | | | | Bitrot stub implements object versioning required for identifying signature freshness. More details about versioning is explained as a part of the "bitrot feature documentation" patch. Change-Id: I2ad70d9eb109ba4a12148ab8d81336afda529ad9 BUG: 1170075 Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/9709 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* features/shard: Introducing sharding translatorKrutika Dhananjay2015-03-191-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Based on the high-level design by Anand V. Avati which can be found @ https://gist.github.com/avati/af04f1030dcf52e16535#sharding-xlator-stripe-20 Still to-do: * complete implementation of inode write fops - [f]truncate, zerofill, fallocate, discard * introduce transaction mechanism in inode write fops * complete readv * Handle open with O_TRUNC * Handle unlinking of all shards during unlink/rename * Compute total ia_size and ia_blocks in lookup, readdirp, etc * wind fsync/flush on all shards Note: Most of the items above are related. Once we come up with a clean way to determine the last shard/shard count for a file/file size and the mgmt of sparse regions of the file, implementing them becomes trivial. Change-Id: Id871379b53a4a916e4baa2e06f197dd8c0043b0f BUG: 1200082 Signed-off-by: Krutika Dhananjay <kdhananj@redhat.com> Reviewed-on: http://review.gluster.org/9841 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* afr: arbiter xlatorRavishankar N2015-03-191-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds the arbiter translator into the tree. This is a server side xlator used for replica 3 volumes. It sits above posix and will be loaded on the 3rd (last) brick of every afr subvolume in a replica 3 configuration. It intercepts inode read/write operations: reads are unwound with ENOTCONN, inode writes are unwound with success without actually passing them down to posix. Metadata operations are allowed to pass through. The CLI for creating a 3 way replica with arbiter is also added but kept disabled (A 'normal' 3 way replica is created instead). This patch is a part of the arbiter logic implementation for 3 way AFR, details of which can be found at http://review.gluster.org/#/c/9656/ Change-Id: I395b81f49d5da52c466daf5c8518f1bbad9c16fa BUG: 1199985 Signed-off-by: Ravishankar N <ravishankar@redhat.com> Reviewed-on: http://review.gluster.org/9840 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Pranith Kumar Karampuri <pkarampu@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Adding ChangeTimeRecorder(CTR) Xlator to GlusterFSJoseph Fernandes2015-03-191-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ********************************************************************** ChangeTimeRecorder(CTR) Xlator | ********************************************************************** ChangeTimeRecorder(CTR) is server side xlator(translator) which sits just above posix xlator. The main role of this xlator is to record the access/write patterns on a file residing the brick. It records the read(only data) and write(data and metadata) times and also count on how many times a file is read or written. This xlator also captures the hard links to a file(as its required by data tiering to move files). CTR Xlator is the consumer of libgfdb. To Enable/Disable CTR Xlator: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ gluster volume set <volume-name> features.ctr-enabled {on/off} To Enable/Disable Frequency Counter Recording in CTR Xlator: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ gluster volume set <volume-name> features.record-counters {on/off} Change-Id: I5d3cf056af61ac8e3f8250321a27cb240a214ac2 BUG: 1194753 Signed-off-by: Joseph Fernandes <josferna@redhat.com> Reviewed-on: http://review.gluster.org/9935 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* libglusterfs/rot-buffs: rotational buffersVenky Shankar2015-03-181-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch introduces rotational buffers aiming at the classic multiple producer and multiple consumer problem. A fixed set of buffer list is allocated during initialization, where each list consist of a list of buffers. Each buffer is an iovec pointing to a memory region of fixed allocation size. Multiple producers write data to these buffers. A buffer list starts with a single buffer (iovec) and allocates more when required (although this can be preallocatd in multiples of k). rot-buffs allow multiple producers to write data parallely with a bit of extra cost of taking locks. Therefore, it's much suited for large writes. Multiple producers are allowed to write in the buffer parallely by "reserving" write space for selected number of bytes and returning pointer to the start of the reserved area. The write size is selected by the producer before it starts the write (which is often known). Therefore, the write itself need not be serialized -- just the space reservation needs to be done safely. The other part is when a consumer kicks in to consume what has been produced. At this point, a buffer list switch is performed. The "current" buffer list pointer is safely pointed to the next available buffer list. New writes are now directed to the just switched buffer list (the old buffer list is now considered out of rotation). Note that the old buffer still may have producers in progress (pending writes), so the consumer has to wait till the writers are drained. Currently this is the slow path for producers (write completion) and needs to be improved. Currently, there is special handling for cases where the number of consumers match (or exceed) the number of producers, which could result in writer starvation. In this scenario, when a consumers requests a buffer list for consumption, a check is performed for writer starvation and consumption is denied until at least another buffer list is ready of the producer for writes, i.e., one (or more) consumer(s) completed, thereby putting the buffer list back in rotation. [ NOTE: I've not performance tested this producer-consumer model yet. It's being used in changelog for event notification. The list of buffers (iovecs) are directly passed to RPC layer. ] Change-Id: I88d235522b05ab82509aba861374a2312bff57f2 BUG: 1170075 Signed-off-by: Venky Shankar <vshankar@redhat.com> Reviewed-on: http://review.gluster.org/9706 Tested-by: Vijay Bellur <vbellur@redhat.com>
* snapshot/scheduling: A cron based scheduler for snapshot schedulingAvra Sengupta2015-03-181-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | GlusterFS volume snapshot provides point-in-time copy of a GlusterFS volume. Currently, GlusterFS volume snapshots can be easily scheduled by setting up cron jobs on one of the nodes in the GlusterFS trusted storage pool. This has a single point failure (SPOF), as scheduled jobs can be missed if the node running the cron jobs dies. The solution to the above problems is addressed in this patch. The snap_scheduler.py helper script expects the user to install the argparse python module before using it. Further details for the same are available at: http://www.gluster.org/community/documentation/index.php/Features/Scheduling_of_Snapshot Change-Id: I2c357af5b7d3e66f270d20eef50cdeecdcbe15c7 BUG: 1198027 Signed-off-by: Avra Sengupta <asengupt@redhat.com> Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/9788 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Adding Libgfdb to GlusterFSJoseph Fernandes2015-03-181-7/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ************************************************************************* Libgfdb | ************************************************************************* Libgfdb provides abstract mechanism to record extra/rich metadata required for data maintenance, such as data tiering/classification. It provides consumer with API for recording and querying, keeping the consumer abstracted from the data store used beneath for storing data. It works in a plug-and-play model, where data stores can be plugged-in. Presently we have plugin for Sqlite3. In the future will provide recording and querying performance optimizer. In the current implementation the schema of metadata is fixed. Schema: ~~~~~~ GF_FILE_TB Table: ~~~~~~~~~~~~~~~~~ This table has one entry per file inode. It holds the metadata required to make decisions in data maintenance. GF_ID (Primary key) : File GFID (Universal Unique IDentifier in the namespace) W_SEC, W_MSEC : Write wind time in sec & micro-sec UW_SEC, UW_MSEC : Write un-wind time in sec & micro-sec W_READ_SEC, W_READ_MSEC : Read wind time in sec & micro-sec UW_READ_SEC, UW_READ_MSEC : Read un-wind time in sec & micro-sec WRITE_FREQ_CNTR INTEGER : Write Frequency Counter READ_FREQ_CNTR INTEGER : Read Frequency Counter GF_FLINK_TABLE: ~~~~~~~~~~~~~~ This table has all the hardlinks to a file inode. GF_ID : File GFID (Composite Primary Key)``| GF_PID : Parent Directory GFID (Composite Primary Key) |-> Primary Key FNAME : File Base Name (Composite Primary Key)__| FPATH : File Full Path (Its redundant for now, this will go) W_DEL_FLAG : This Flag is used for crash consistancy, when a link is unlinked. i.e Set to 1 during unlink wind and during unwind this record is deleted LINK_UPDATE : This Flag is used when a link is changed i.e rename. Set to 1 when rename wind and set to 0 in rename unwind Libgfdb API: ~~~~~~~~~~~ Refer libglusterfs/src/gfdb/gfdb_data_store.h Change-Id: I2e9fbab3878ce630a7f41221ef61017dc43db11f BUG: 1194753 Signed-off-by: Joseph Fernandes <josferna@redhat.com> Signed-off-by: Dan Lambright <dlambrig@redhat.com> Signed-off-by: Joseph Fernandes <josferna@redhat.com> Reviewed-on: http://review.gluster.org/9683 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* feature/glusterfind: A tool to find incremental changesAravinda VK2015-03-181-2/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Documentation is available in patch: http://review.gluster.org/#/c/9800/ A tool which helps to get list of modified files or list of all files in GlusterFS Volume using Changelog or find command. Usage ===== glusterfind --help Create: ------- glusterfind create --help The tool creates status file $GLUSTERD_WORKDIR/SESSION/VOLUME/status and records current timestamp to initiate the session. This timestamp will be used as start time for next runs. As part of create also generates ssh key and distributes to all peers. and enables build.pgfid and changelog using volume set command. Pre: ---- glusterfind pre --help This command is used to generate the list of files modified after session creation time or after last run. To get list of all files/dirs in Volume, run pre command with `--full` argument. The tool gets all nodes details using gluster volume info and runs node agent for each brick in respective nodes via ssh command. Once these node agents generate the output file, tool copies to local using scp. Merges all the output files to generate the final output file. Post: ----- glusterfind post --help After consuming the list, this sub command is called to update the session time based on pre command status file. List: ----- glusterfind list --help To view all the sessions Delete: ------- glusterfind delete --help Delete session. Known Issues ------------ 1. Deleted files will not get listed, since we can't convert GFID to Path if file/dir is deleted. 2. Only new name will get listed if Renamed. 3. All hardlinks will get listed. Change-Id: I82991feb0aea85cb6ec035fddbf80a2b276e86b0 BUG: 1193893 Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/9682 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Venky Shankar <vshankar@redhat.com> Reviewed-by: Prashanth Pai <ppai@redhat.com> Reviewed-by: Kotresh HR <khiremat@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* NFS-Ganesha: Volume set option for managing NFS-Ganesha exports.Meghana Madhusudhan2015-03-181-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | A dummy translator has been introduced as a place holder for functions related to managing NFS-Ganesha exports. A volume set option is introduced to manage volume level exports. gluster vol set <volname> ganesha.enable ON/OFF 1. gluster volume set <volname> ganesha.enable ON It creates the export config file with a unique export ID. Sends a DBus signal to export this volume dynamically. 2. gluster vol set <volname> ganesha.enable OFF Unexports the specific volume. Deletes the specfic config file related to the volume. This change also removes the handling of the older keys "nfs-ganesha.enable" and "nfs-ganesha.host" Change-Id: I8d4a0b542326a6a0c8e4711600b106274d666587 BUG: 1188184 Signed-off-by: Meghana Madhusudhan <mmadhusu@redhat.com> Reviewed-on: http://review.gluster.org/9585 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com>
* NFS-Ganesha: Install scripts, config files, and resource agent scriptsKaleb S. KEITHLEY2015-03-171-0/+4
| | | | | | | | | | | | | | | | | Resubmitting after a gerrit bug bungled the merge of http://review.gluster.org/9621 (was it really a gerrit bug?) Scripts related to NFS-Ganesha are in extras/ganesha/scripts. Config files are in extras/ganesha/config. Resource Agent files are in extras/ganesha/ocf Files are copied to appropriate locations. Change-Id: I137169f4d653ee2b7d6df14d41e2babd0ae8d10c BUG: 1188184 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/9912 Tested-by: Gluster Build System <jenkins@build.gluster.com>
* Upcall: New xlator to store various states and send cbk eventsSoumya Koduri2015-03-171-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Framework on the server-side, to handle certain state of the files accessed and send notifications to the clients connected. A generic and extensible framework, used to maintain states in the glusterfsd process for each of the files accessed (including the clients info doing the fops) and send notifications to the respective glusterfs clients incase of any change in that state. This patch handles "Inode Update/Invalidation" upcall event. Feature page: URL: http://www.gluster.org/community/documentation/index.php/Features/Upcall-infrastructure Below link has a writeup which explains the code changes done - URL: https://soumyakoduri.wordpress.com/2015/02/25/glusterfs-understanding-upcall-infrastructure-and-cache-invalidation-support/ Change-Id: Ie3d724be9a3419fcf18901a753e8ec2df2ac802f BUG: 1200262 Signed-off-by: Soumya Koduri <skoduri@redhat.com> Reviewed-on: http://review.gluster.org/9535 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* geo-rep: mountbroker user managementAravinda VK2015-03-171-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Non root geo-replication setup is now simplified. This patch provides cli for mountbroker user and options management To set Options, gluster system:: execute mountbroker opt <KEY> <VALUE> # for example, gluster system:: execute mountbroker opt mountbroker-root /var/mountbroker-root gluster system:: execute mountbroker opt geo-replication-log-group geogroup gluster system:: execute mountbroker opt rpc-auth-allow-insecure on To remove option, gluster system:: execute mountbroker optdel <KEY> # for example, gluster system:: execute mountbroker optdel geo-replication-log-group To add/edit user, gluster system:: execute mountbroker user <USERNAME> <VOLUMES> # for example gluster system:: execute mountbroker user geoaccount slavevol1,slavevol2 To remove user, gluster system:: execute mountbroker userdel <USERNAME> # for example gluster system:: execute mountbroker userdel geoaccount For info, gluster system:: execute mountbroker info gluster system:: execute mountbroker -j info For JSON output add -j after mountbroker, for example, gluster system:: execute mountbroker -j user geoaccount slavevol1,slavevol2 PS: Each peer prints its own JSON output, aggregator required from consumer side BUG: 1136312 Change-Id: Ie52210c0bcc91ac2ffd3ba58988222ffca62b47f Signed-off-by: Aravinda VK <avishwan@redhat.com> Reviewed-on: http://review.gluster.org/9398 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: darshan n <dnarayan@redhat.com> Reviewed-by: Kotresh HR <khiremat@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* Features/trash : Combined patches for trash translatorAnoop C S2015-03-161-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | This is the combined patch set for supporting trash feature. http://www.gluster.org/community/documentation/index.php/Features/Trash Current patch includes the following features: * volume set options for enabling trash globally and exclusively for internal operations like self-heal and re-balance * volume set options for setting the eliminate path, trash directory path and maximum trashable file size. * test script for checking the functionality of the feature * brief documentation on different aspects of trash feature. Change-Id: Ic7486982dcd6e295d1eba0f4d5ee6d33bf1b4cb3 BUG: 1132465 Signed-off-by: Anoop C S <achiraya@redhat.com> Signed-off-by: Jiffin Tony Thottan <jthottan@redhat.com> Reviewed-on: http://review.gluster.org/8312 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* tools: Finds missing files in gluster volume given backend brickpathKotresh HR2015-03-151-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | The tool finds the missing files in a geo-replication slave volume. The tool crawls backend .glusterfs of the brickpath, which is passed as a parameter and stats each entry on slave volume mount to check the presence of file. The mount used is aux-gfid-mount, hence no path conversion is required and is fast. The tool needs to be run on every node in cluster for each brickpath of geo-rep master volume to find missing files on slave volume. The tool is generic enough and can be used in non geo-replication context as well. Most of the crawler code is leverged from Avati's xfind and is modified to crawl only .glusterfs (https://github.com/avati/xsync) Thanks Aravinda for scripts to convert gfid to path. Change-Id: I84deaaaf638f7c571ff1319b67a3440fe27da810 BUG: 1187140 Signed-off-by: Aravinda VK <avishwan@redhat.com> Signed-off-by: Kotresh HR <khiremat@redhat.com> Reviewed-on: http://review.gluster.org/9503 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* build: don't report (hide) systemtap config optionKaleb S. KEITHLEY2015-03-101-1/+1
| | | | | | | | | | | | | | | We don't actually support systemtap. We don't have any systemtap enablement. The configure doesn't actually do anything to configure systemtap support. It's confusing to show that systemtap is disabled, someone might try to run --enable-systemtap, and then we'll show that it's enabled, but it still doesn't actually do anything. Hide it until such time as we actually have some real systemtap support Change-Id: I8617121bee5bc724027e5f4d5eed00fd3c5a4ab2 BUG: 865734 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/9564
* posix: add ACL translation for the GF_POSIX_ACL_*_KEY xattrNiels de Vos2015-03-091-0/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adding support for two virtual extended attributes that are used for converting a binary POSIX ACL to a POSIX.1e long ACL text format. This makes it possible to transfer the ACL over the network to a different OS which can convert the POSIX.1e text format to its native structures. The following xattrs are sent over RPC in SETXATTR/GETXATTR procedures, and contain the POSIX.1e long ACL text format: - glusterfs.posix.acl: maps to ACL_TYPE_ACCESS - glusterfs.posix.default_acl: maps to ACL_TYPE_DEFAULT acl_from_text() (from libacl) converts the text format into an acl_t structure. This structure is then used by acl_set_file() to set the ACL in the filesystem. libacl-devel is needed for linking against libacl, so it has been added to the BuildRequires in the .spec. NetBSD does not support POSIX ACLs. Trying to get/set POSIX ACLs on a storage server running NetBSD, an error will be returned with errno set to ENOTSUP. Faking support, but not enforcing ACLs seems wrong to me. URL: http://www.gluster.org/community/documentation/index.php/Features/Improved_POSIX_ACLs BUG: 1185654 Change-Id: Ic5eb73d69190d3492df2f711d0436775eeea7de3 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9627 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: soumya k <skoduri@redhat.com> Reviewed-by: Raghavendra Bhat <raghavendra@redhat.com>
* testing: Switch to cmocka the successor of cmockery2Niels de Vos2015-03-051-34/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | This uses https://cmocka.org/ as the unit testing framework. With this change, unit testing is made optional as well. We assume there is no cmocka available while building. cmocka will be enabled by default later on. For now, to build with cmocka run: $ ./configure --enable-cmocka This change is based on the work of Andreas (replacing cmockery2 with cmocka) and Kaleb (make cmockery2 an optional build dependency). The only modifications I made, are additional #defines in unittest.h for making sure the unit tests function as expected. Change-Id: Iea4cbcdaf09996b49ffcf3680c76731459cb197e BUG: 1067059 Merged-change: http://review.gluster.org/9762/ Signed-off-by: Andreas Schneider <asn@samba.org> Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Signed-off-by: Niels de Vos <ndevos@redhat.com> Change-Id: Ia2e955481c102d5dce17695a9205395a6030e985 Reviewed-on: http://review.gluster.org/9738 Tested-by: Gluster Build System <jenkins@build.gluster.com>
* build, glusterd: Add liburcu to build systemKaushal M2015-02-231-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds liburcu related checks to the build system and updates the spec file to require 'userspace-rcu'. liburcu >= 0.7 is required to build GlusterFS, but 0.8 and above is preferred. For cases when liburcu 0.7.x is the available version, some function definitions (currently just one) from liburcu-0.8.6 have been made available in /contrib/userspace-rcu/. This change was developed on the git branch at [1]. This commit is a combination of the following commits on the development branch. a5cd6bd Add userspace-rcu checks to configure.ac fe5ced3 Add URCU libs to glusterd libtool flags 1e43302 Add local definition of cds_list_add_tail_rcu for liburcu-0.7 98da755 Move local definition of cds_list_add_tail_rcu into contrib 8c44dfd Update spec file to include userspace-rcu0466e33 Rename rculist-additional.h to rculist-extra.h 947c7b3 Add rculist-extra.h to dist 19f32ad Address review comments 9605/1 [1]: https://github.com/kshlm/glusterfs/tree/urcu Change-Id: Ifbb617d0dacce8fa01214f894badb9d8cdcaf56f BUG: 1191030 Signed-off-by: Kaushal M <kaushal@redhat.com> Reviewed-on: http://review.gluster.org/9605 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Atin Mukherjee <amukherj@redhat.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Krishnan Parthasarathi <kparthas@redhat.com> Tested-by: Krishnan Parthasarathi <kparthas@redhat.com>
* build: do not include automake/autoconf cache in the 'make dist' tarballNiels de Vos2015-01-301-2/+1
| | | | | | | | | | | | | | | | Remove the caches from the 'dist-hook' target that 'make dist' executes. Also, there is no need to run ./configure inside contrib/argp-standalone if it will not get used. configure.ac has been modified to only configure the contrib/argp-standalone sources for distributions that do not have the <argp.h> header available. BUG: 1183538 Change-Id: Iedd67139ec83f0076e24ed0d575f9053ac1a94ec Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9463 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* build: add a tmpfiles.d config file for /run/glusterNiels de Vos2015-01-191-0/+8
| | | | | | | | | | | | | | | | | | New distrubutions have a /run directory on a volatile tmpfs filesystem. This causes /run/gluster to be removed with each reboot. A tmpfiles.d configuration is used to create the directory on boot. EL5 and EL-6 do not use /run, current Fedora versions do. By checking %{_tmpfilesdir} in the .spec, we can identify if the distribution uses tmpfiles.d. Change-Id: I231e7d6603d573cb905246558e14a51577c0eb56 BUG: 1182934 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9458 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Lalatendu Mohanty <lmohanty@redhat.com>
* api: versioned symbols in libgfapi.so for compatibilityKaleb S. KEITHLEY2015-01-121-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use versioned symbols to keep libgfapi at libgfapi.so.0.0.0 Revisited to address broken build on Mac OS X See http://review.gluster.org/9036 Rebased to include http://review.gluster.org/#/c/9376/ (glfs_resolve()) but note that gerrit's "Rebase Change" couldn't do it. N.B. noticed that glfs_get_volumeid() decl in glfs.h was missing the __THROW, added it. On systems using ELF and the GNU toolchain, symbol versions are created with a .symver asm operand in the .c source file. Clang is claimed to be compatible with gcc, so we'll pretend for now that this also works with clang. On Mac OS X, aliases are created with __asm "magic" in the .h header file. In the normal case, when both the decl and defn match, that's all that's needed. In our case though the decl and defn don't match --- we have, e.g. a defn such as 'int glfs_foo(...)' and the corresponding decl is 'int pub_glfs_foo(...)'. To make this work we create the necessary aliases in the library at link time with the -alias_list link option. Note that this results in there being pairs of symbols in the .dylib, e.g. _pub_glfs_foo and _glfs_foo$GFAPI_3.4.0. We could use another link option, -unexported_symbols_list to elide the _pub_glfs_* symbols. (And we probably should.) Linux symbol versioning was essentially copied from Solaris; in general I would expect this to "just work" on Solaris, but until someone tries we don't really know. Change-Id: Icb96a3c2d80be7b6d7a6849bb9168f03a947f47c BUG: 1160709 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/9143 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Shyamsundar Ranganathan <srangana@redhat.com>
* build: only install geo-rep scripts when enabledNiels de Vos2014-12-071-0/+6
| | | | | | | | | | | | | | When geo-replication is not enabled, the related scripts should not get installed. EPEL-5 does not support geo-replication, and the installed but unpackaged scripts cause rebuilding for .el5 to fail. BUG: 1169005 Change-Id: I1b6a352b73bd1ed1c5b330f54e26e81aed9a5a4e Reported-by: Lalatendu Mohanty <lmohanty@redhat.com> Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9221 Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* glupy: build fix if python and glusterfs prefix differEmmanuel Dreyfus2014-11-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | If python is installed in ${pythonprefix} and glusterfs in ${glusterfsprefix}, we have the following values: ${PYTHON}-config --prefix => ${pythonprefix} $libdir => ${glusterfsprefix}/lib Using LDFLAGS="-L`${PYTHON}-config --prefix`/$libdir" we lookf for python libraries in ${pythonprefix}/${glusterfsprefix}/lib while we should be looking for ${pythonprefix}/lib Replacing $libdir by lib breaks bug 1159248, so let us look in both ${pythonprefix}/lib and ${pythonprefix}/$libdir BUG: 1129939 Change-Id: I2fef1b795235d1543a0e5ac619c6c2d59127fb66 Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/9137 Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* Replace copied (from rsync) checksum code by adler32() from zlibNiels de Vos2014-11-211-0/+3
| | | | | | | | | | | | | | | | | | | | The weak checksum code that is included in libglusterfs has initialy been copied from the rsync sources. Instead of maintaining a copy of a function, we should use a function from a shared library. The algorithm seems to be Adler-32, zlib provides an implementation. The strong checksum function has already been replaced by MD5 from OpenSSL. It is time to also remove the comments about the origin of the implementation, because it is not correct anymore. Change-Id: I70c16ae1d1c36b458a035e4adb3e51a20afcf652 BUG: 1149943 Reported-by: Wade Mealing <wmealing@redhat.com> Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9035 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* pkg-config: make the version in gluster-api.pc backwards compatibleNiels de Vos2014-11-201-1/+10
| | | | | | | | | | | | | | | | | | | | Once we released gluster-api.pc with version=4. Since then we undid the library versioning and replaced it with symbol-versioning. The current libgfapi.so has version 0, but the symbols have the version from the main package at the time they were added. Because other packages (like samba) use the pkg-config version, we can not drop it, or decrease the version easily. The simplest solution is to keep the version=4 and add sub-digits for the actual package/symbol versions. In future, the version in gluster-api.pc will be like 4.3.x.y. Change-Id: If359c8de5b847a7e818199a7246636113837da2d BUG: 1166232 Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9154 Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Lalatendu Mohanty <lmohanty@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* build: fix glupy linking warningsNiels de Vos2014-11-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While building glupy on x86_64, the following warnings are thrown: Making all in glupy Making all in src CC glupy.lo CCLD glupy.la /usr/bin/ld: skipping incompatible /usr/lib/libdl.so when searching for -ldl /usr/bin/ld: skipping incompatible /usr/lib/libutil.so when searching for -lutil /usr/bin/ld: skipping incompatible /usr/lib/libm.so when searching for -lm /usr/bin/ld: skipping incompatible /usr/lib/librt.so when searching for -lrt /usr/bin/ld: skipping incompatible /usr/lib/libpthread.so when searching for -lpthread /usr/bin/ld: skipping incompatible /usr/lib/libc.so when searching for -lc The libraries to link against are in /usr/lib64 on x86_64 in Fedora, RHEL and CentOS. Other architectures or distributions may use a different path. Instead of hardcoding "/lib" in configure.ac, the variable $libdir should be used so that the path gets adapted to the distribution and architecture. Change-Id: Iae5db3ee8a62959ccb7f958d7c95eb77c4d4b1dd BUG: 1159248 Reported-by: Kiran Patil <kiran@fractalio.com> Signed-off-by: Niels de Vos <ndevos@redhat.com> Reviewed-on: http://review.gluster.org/9033 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com> Reviewed-by: Humble Devassy Chirammal <humble.devassy@gmail.com>
* api: versioned symbols in libgfapi.so for compatibilityKaleb S. KEITHLEY2014-11-071-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use versioned symbols to keep libgfapi at libgfapi.so.0.0.0 Some nits uncovered: + there are a couple functions declared that do not have an associated definition, e.g. glfs_truncate(), glfs_caller_specific_init() + there are seven private/internal functions used by heal/src/glfsheal and the gfapi master xlator (glfs-master.c): glfs_loc_touchup(), glfs_active_subvol(), and glfs_subvol_done(), glfs_init_done(), glfs_resolve_at(), glfs_free_from_ctx(), and glfs_new_from_ctx(); which are not declared in glfs.h; + for this initial pass at versioned symbols, we use the earliest version of all public symbols, i.e. those for which there are declarations in glfs.h or glfs-handles.h. Further investigation as we do backports to 3.6, 3.4, and 3.4 will be required to determine if older implementations need to be preserved (forward ported) and their associated alias(es) and symbol version(s) defined. FWIW, we should consider linking all of our libraries with a map, it'll result in a cleaner ABI. Perhaps something for an intern to do or a Google Summer of Code project. Change-Id: I499456807a5cd26acb39843216ece4276f8e9b84 BUG: 1160709 Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com> Reviewed-on: http://review.gluster.org/9036 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Niels de Vos <ndevos@redhat.com> Tested-by: Niels de Vos <ndevos@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* glupy: portability fixesEmmanuel Dreyfus2014-11-051-12/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes portability problems so that NetBSD passes tests/features/glupy.t - Use python-config to detect python build environment on all systems, not just Linux and Darwin. - Get the site-package directory from python and make sure we install glupy.py there, Previously we installed within glusterfs prefix, which caused a problem if it was different that python's prefix. - Set PYTHONPATH for tests so that the detected site-packages is used in python's search path. This should be useless, but let us have it just in case. - Pass glupy.so path from glusterfsd to glupy.py through an environment variable and use it in CDLL instead of "", as the later seems not portable (at least it fails on NetBSD). - Use gil_init_key pthread_getspecific to avoid deadlocks (that code was #ifdef out, perhaps because it was not needed on Linux, but it seems to be required for NetBSD. - Recover the error message from Python and send it to the logs to help debugging problems. BUG: 1129939 Change-Id: Icc71e77d6940f0759cc14c5c5cf7ca6fa431e0d2 Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/8978 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Jeff Darcy <jdarcy@redhat.com>
* heal: glfs-heal implementationPranith Kumar K2014-10-151-0/+2
| | | | | | | | | | | Thanks a lot to Niels for helping me to get build stuff right. Change-Id: I634f24d90cd856ceab3cc0c6e9a91003f443403e BUG: 1147462 Signed-off-by: Pranith Kumar K <pkarampu@redhat.com> Reviewed-on: http://review.gluster.org/6529 Reviewed-by: Krutika Dhananjay <kdhananj@redhat.com> Tested-by: Gluster Build System <jenkins@build.gluster.com>
* Do not hardcode umount(8) path, emulate lazy umountEmmanuel Dreyfus2014-10-031-0/+9
| | | | | | | | | | | | | | | | | | 1) Use a system-dependent macro for umount(8) location instead of relying on $PATH to find it, for security and portability sake. 2) Introduce gf_umount_lazy() to replace umount -l (-l for lazy) invocations, which is only supported on Linux; On Linux behavior in unchanged. On other systems, we fork an external process (umountd) that will take care of periodically attempt to unmount, and optionally rmdir. BUG: 1129939 Change-Id: Ia91167c0652f8ddab85136324b08f87c5ac1e51d Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/8649 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Csaba Henk <csaba@redhat.com> Reviewed-by: Vijay Bellur <vbellur@redhat.com>
* porting: various fixes regression tests OSX/FreeBSDHarshavardhana2014-08-291-3/+3
| | | | | | | | | | | | | | | | | | | | - `wc -l` on OSX/FreeBSD adds spurious spaces, this clobbers up TAP output parsers - fix it. - `umount -l` doesn't exist on OSX/FreeBSD use 'umount -f' if available. - Add check for 'file' version, to handle mime type variations across versions - Converge 'glusterfs --attribute-timeout=0 --entry-timeout=0' into '$GFS' - Modify remaining 'mount -t nfs' to use 'mount_nfs' - Update sha1sum for OSX to use 'openssl sha1'. Change-Id: Id1012faa5d67a921513d220e7fa9cebafe830d34 BUG: 1131713 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/8501 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* osx: Enable qemu feature build on DarwinHarshavardhana2014-08-111-3/+3
| | | | | | | | | Change-Id: Ie5d437aa6c52c180fd8d54680c5f882e75c0bf7e BUG: 1089172 Signed-off-by: Harshavardhana <harsha@harshavardhana.net> Reviewed-on: http://review.gluster.org/8448 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Kaleb KEITHLEY <kkeithle@redhat.com>
* Always build EC xlatorEmmanuel Dreyfus2014-08-101-12/+0
| | | | | | | | | | | | Now EC xlator does not require MMX anymore, always build it. BUG: 764655 Change-Id: I50a64e22c080f2759eaa57786e7f69c34f11f89c Signed-off-by: Emmanuel Dreyfus <manu@netbsd.org> Reviewed-on: http://review.gluster.org/8451 Tested-by: Gluster Build System <jenkins@build.gluster.com> Reviewed-by: Harshavardhana <harsha@harshavardhana.net> Tested-by: Harshavardhana <harsha@harshavardhana.net>
generated by cgit (git 2.34.1) at 2024-04-25 04:01:29 +0000